Best spectrum analyzers - Buying Guide
Last Updated: 05/04/2024
Share on
Bestselling spectrum analyzers on Amazon
- Portable Tinysa Spectrum Analyzer, AURSINC V0.3.1 Handheld Frequency Analyzer, Signal Generator 100k...
- SEESII Nanovna-H Vector Network Analyzer,Upgraded HW3.6 10KHz-1.5GHz MF HF VHF UHF Antenna Analyzer,...
- 2023 Upgraded TinySA Ultra Spectrum Analyzer, SeeSii 4.0 Inch 100kHz to 5.3GHz Handheld Tiny Frequen...
- AURSINC NanoVNA-H4 Vector Network Analyzer, Lastest V4.3 10KHz-1.5GHz HF VHF UHF 4" Touch Screen Nan...
- Upgraded NanoVNA-H4 Vector Network Analyzer, SeeSii Latest V4.3/4.2 10KHz-1.5GHz HF VHF UHF 4" Touch...
- 2023 4Inch TinySA Ultra Spectrum Analyzer 100kHz-5.3GHz,V0.4.5.1 Portable Tiny Frequency Analyzer wi...
- Portable TinySA Spectrum Analyzer,SEESII Upgraded V0.3.1 Handheld Tiny Frequency Analyzer 100kHz to ...
- Spectrum Analyzer, 2023 Upgraded TinySA Ultra Spectrum Analyzer with 4.0 Inch Sensitive Touch Screen...
- AURSINC NanoVNA-F V2 Vector Network Analyzer, 50KHz-3GHz Antenna Analyzer Ham Radio HF VHF UHF 4.3in...
- RF Test Board, 18 Functional Modules RF Demo Kit NanoVNA RF Test Module Vector Network Analyzer Boar...
#1
Portable Tinysa Spectrum Analyzer, AURSINC V0.3.1 Handheld Frequency Analyzer, Signal Generator 100kHz to 960MHz MF/HF/VHF UHF Input ESD Protected Function with 2.8 inch Touchscreen
Asin: B08H1S2SYR | Model: TinySA Spectrum Analyzer | PartNumber: TinySA Spectrum Analyzer | Ean: 0753318593381 | UPC: 753318593381
[2 In 1 Device] - When Not Used As Spectrum Analyzer It Can Be Used As Signal Generator, Mf/Hf/Vhf Sinus Output Between 0.1Mhz-350Mhz, Uhf Square Wave Output Between 240Mhz-960Mhz. Built-In Calibration Signal Generator Enables Automatic Self-Test And Low Input Calibration. The Tinysa Includes All The Components Of A Traditional Heterodyne Swept Spectrum Analyzer, With A Color Display Showing 290 Scan Points Covering Up To The Full Low Or High Frequency Range.
[Pc Control] - The Usb Interface Realizes The Serial Over Usb (Cdc) Protocol And A Large Number Of Commands Can Be Called Through The Serial Interface. The Commands Can Be Used For Measurements Or Updating Internal Settings. The Windows Driver Will Automatically Install Upon Connecting To A Windows Pc. The Driver For Linux Is Built Into The Kernel. Tinysa-App Is Available To Control The Tinysa And Capture Its Screen..
[Package List] - 1X Tiny Sa Spectrum Analyzer(With 500Mah Battary, 2.8Inch Touchsreen) ; 2X 20Cm/7.87Inch Rf Cable; 1X Usb-C Cable ; 2X Sma Female To Female Connector; 1X Touchscreen Pen; 1X Sma Telescopic Antenna. Reliability You Can Trust, Our Spectrum Analyzer Caters To Your Diverse Needs..
[4 Input/Output Spec Modes] - The Input/Output Spec Of The Tinysa Is Divided Into 4 Modes: Low Input, High Input, Low Output, And High Output. Spectrum Analyzer Has Two Inputs: High-Quality Mf/Hf/Vhf Input For 0.1Mhz-350Mhz; Lower-Quality Uhf Input For 240Mhz-960Mhz. Switchable Resolution Bandpass Filters Ranging From 2.6Khz To 640Khz.
[Frequency Range] - The Tinysa Spectrum Analyzers Use A Resolution Filter To Isolate Input Power Within A Narrow Frequency Range. This Resolution Filter Is Swept Across The Desired Frequency Range. The Fastest Scanning Speed Occurs With An Rbw Or 300Khz Or Wider And Is About 2 Scans Per Second. The Scanning Speed Decreases Rapidly As The Frequency Span Increases And The Rbw Decreases. A Scan From 0Mhz To 350Mhz With An Rbw Of 10Khz Takes About 2 Minutes.
Features
- [Upgraded Version: ESD Protection Diodes] - Tinysa produced by Hugen, with V0.3.1 hardware. The firmware of the tinySA can be updated, for newest firmware version update, please refer to: tinysa .org. The displayed version info indicates "ESD protection" with a diode for improved stability, sensitivity, anti-static level and longevity
- [Frequency Range] - The tinysa spectrum analyzers use a resolution filter to isolate input power within a narrow frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. The scanning speed decreases rapidly as the frequency span increases and the RBW decreases. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes
- [2 in 1 Device] - When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator enables automatic self-test and low input calibration. The tinysa includes all the components of a traditional heterodyne swept spectrum analyzer, with a color display showing 290 scan points covering up to the full low or high frequency range
- [4 Input/Output Spec Modes] - The input/output spec of the tinysa is divided into 4 modes: Low Input, High Input, Low Output, and High Output. Spectrum Analyzer has two inputs: high-quality MF/HF/VHF input for 0.1MHz-350MHz; lower-quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters ranging from 2.6kHz to 640kHz
- [PC Control] - The USB interface realizes the Serial over USB (CDC) protocol and a large number of commands can be called through the serial interface. The commands can be used for measurements or updating internal settings. The Windows driver will automatically install upon connecting to a Windows PC. The driver for Linux is built into the kernel. Tinysa-APP is available to control the tinysa and capture its screen.
- [Package List] - 1x Tiny sa Spectrum Analyzer(with 500mah battary, 2.8inch touchsreen) ; 2x 20cm/7.87inch RF Cable; 1x USB-C Cable ; 2x SMA Female to Female Connector; 1x Touchscreen Pen; 1x SMA Telescopic Antenna. Reliability you can trust, our spectrum analyzer caters to your diverse needs.
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Dimensions: 1.57 x 6.50 x 4.00 inches
See On Amazon #2
SEESII Nanovna-H Vector Network Analyzer,Upgraded HW3.6 10KHz-1.5GHz MF HF VHF UHF Antenna Analyzer, Measuring S Parameters, Voltage Standing Wave Ratio,Phase,Delay,Smith Chart,Support Data Storage
Asin: B08132DJLS | Model: NanoVNA-H | PartNumber: NanoVNA-H | Ean: 0889251491337 | UPC: 889251491337
✅ 【Multi Tx/Rx Function】:The Default Firmware Is Mainly Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11/S21 Parameters (Need To Manually Replace The Transceiver Port Wiring)..
✅ 【Built-In Micro-Sd Port & Time Display】: The Lastest Antenna Analyzer With Microsd Card Port,So You Can Save Field Test Data Or Screens To A Microsd Card At Any Time,Support Up To 32Gb Memory Card. (Not Include In The Pacakge).In Addition, Different From Old Version Nanovnas, The Date And Time Can Be Customized, Which Is Convenient For You To Further Record And Save Data..The Default Firmware Main Function Is Used For Antenna Performance Measurement..
🎁【Abundant Accessories】:Come With 1X Nanovna-H Host, 2X 30Cm Sma Male To Male Rg174 Rf Cable, 1X Sma Female To Female Connector,1X Sma Short,Open &Load Simple Calibration Kit,1X Usb Type-C Data Cable, 1 X Usb-C To Usb-C Line, 1X Lanyard And Touch Plectrum. All The Accessories Are Packaged In A Sophisticated Box.This Is Perfect Vna Analyzer For Your Own Use Or As A Gift For Your Friend..
✅ 【Android Phone & Pc Software Control】:The Nanovna Analyzer Uses Pc Software Nanovnasaver, It Can Connect To A Nanovna And Extracts The Data For Display On A Computer For Saving To Touchstone Files. We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software.We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software.In Addition,The Vna Support Usb-C To Usb-C Line, More Convenient To Connect To Mobile Phones. It Is Compatible With Most Android Phones With The Same Screen Display (Doesnt Support For Iphone)..
✅ 【Improved Frequency Algoruthm】: The Improved Frequency Algorithm Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The Metal Shield Is Designed To Reduce The External Interference And Improve The Measurement Accuracy. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics.The Default Firmware Main Function For Vector Network Analyzer Is Used For Antenna Performance Measurement..
Features
- Upgraded Nanovna-H HW3.6 : SeeSii Nanovna-H Vector Network Analyzer is developed by Hugen. With latest 3.6 version,10KHz-1.5GHz measure range,2.8 inch LCD touchscreen,mini and portable design.This Antenna Analyzer is provides outstanding vector network measurement capabilities and perfect for evaluating antenna resonance and SWR.It is a very mini handy & smart analyzer for electronics engineer, amateur radio operators or radio diy amateurs.
- Improved Frequency Algoruthm : The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The metal shield is designed to reduce the external interference and improve the measurement accuracy. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.The default firmware main function for vector network analyzer is used for antenna performance measurement.
- Multi TX/RX Function :The default firmware is mainly used for antenna performance measurement. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring).
- Android Phone & PC Software Control :The nanovna analyzer uses PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data for display on a computer for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software.We can export Touchstone (snp) files for various radio design and simulation software through PC software.In addition,the vna support USB-C to USB-C line, more convenient to connect to mobile phones. It is compatible with most Android phones with the same screen display (doesnt support for iPhone).
- Built-in Micro-SD Port & Time Display : The lastest antenna analyzer with MicroSD card port,so you can save field test data or screens to a MicroSD card at any time,support up to 32GB memory card. (Not include in the pacakge).In addition, different from old version NanoVNAs, the date and time can be customized, which is convenient for you to further record and save data..The default firmware main function is used for antenna performance measurement.
- Abundant Accessories :Come with 1x NanoVNA-H host, 2x 30cm SMA Male to Male RG174 RF Cable, 1x SMA Female to Female Connector,1x SMA SHORT,OPEN &LOAD simple calibration kit,1x USB Type-C Data Cable, 1 x USB-C to USB-C Line, 1x Lanyard and touch plectrum. All the accessories are packaged in a sophisticated box.This is perfect vna analyzer for your own use or as a gift for your friend.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Weight: 0.44 pounds
See On Amazon #3
2023 Upgraded TinySA Ultra Spectrum Analyzer, SeeSii 4.0 Inch 100kHz to 5.3GHz Handheld Tiny Frequency Analyzer with 32Gb Card, 2-in-1 Signal Generator 100kHz to 800MHz MF/HF/VHF UHF Input,V0.4.5.1
Asin: B0BBGK9QJB | Model: SEESII- TinySA ULTRA | PartNumber: SEESII- TinySA ULTRA
✅【2 In 1 Multifunctional Frequency Analyzer & Signal Generator】:When Not Used As Spectrum Analyzer It Can Be Used As Signal Generator,With Sine Wave Output Between 0.1-800Mhz Or Square Wave Or Dual Tone Output Up To 4.4Ghz.Built-In Calibration Signal Generator That Is Used For Automatic Self Test And Low Input Calibration..
✅【Package List】:1X Tinysa Ultra Spectrum Analyzer; 2 X30cm Alsr100 Sma Cables;1 X Usb Type-C Data Cable;1 X Sma-Sma Barrel Connector ;1X Tlanyard And Touch Plectrum;1 X Antenna With Sma Connector.1 X32gb Microsd Card(Plugged In The Host), 1 X Touchscreen Pen. It's Very Useful As An Antenna Analyzer For Your Ham Station, Easy To Set Without Fancy Calibration..
✅【Ultra-Long Battery Life】:The Upgraded Tinysa Analyzer Built-In 3000M-Ah Rechargeable Battery,With Type-C Charging Cable And Led Charging Indicator,It Can Be Fully Charged Within 3 Hours,No Need To Charge Frequently..
✅ 【200Hz-850Khz Rbw】:The Rbw Is As Low As 200Hz, Which Can Effectively Distinguish Adjacent Signals And Meet The Requirements Of Ssb Dual-Satellite Inter-Modulation Test. Input Step Attenuator From 0Db To 31Db (Can Not Be Used Not In Combination With Lna)..
✅【Pc Control】:Connected To A Pc Via Usb It Becomes A Pc Controlled Spectrum Analyzer Or Signal Generator.Tinysa-App Transfers Data Directly To The Computer.The Usb Interface Implements Cdc Protocol And There Is A Large Set Of Commands That Can Be Invoked Over The Serial Interface. These Command Can Be Used To Perform Measurements Or Update Internal Settings. The Driver For Windows Will Install Automatically After Connecting To A Windows Pc. The Driver For Linux Is Built Into The Kernel..
✅【Frequency Range】:Compared To The Tinysa (100Khz To 960Mhz), The Upgraded Tinysa Ultra Has 100Khz To 5.3Ghz Ultra-Wide Measuring Frequency Range, Spectrum Analyzer For 0.1-800Mhz, With Ultra Mode Up To 0.1Mhz-6Ghz.Switchable Resolution Band Pass Filters For Both Ranges Between 200Hz To 850Khz. Color Display Showing 450 Scan Points Covering Up To The Full Low Or High Frequency Range. Faster And More Accurate Measurement Performance, You Can Easily Cope With Measurement Testes In Various Fields..
Features
- 2023 Upgraded TinySA Ultra :This New Version V0.4.5.1 Spectrum Analyzer is developed by Hugen, with 4.0 inch 480 x 320 large touchscreen display, 100kHz to 5.3GHz widely measure range, with the new ESD protection function, the product has a higher anti-static level and a longer service life, and built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage.
- Frequency Range :Compared to the tinysa (100kHz to 960MHz), the upgraded tinysa ULTRA has 100kHz to 5.3GHz ultra-wide measuring frequency range, spectrum analyzer for 0.1-800MHz, with Ultra mode up to 0.1MHz-6GHz.Switchable resolution band pass filters for both ranges between 200Hz to 850kHz. Color display showing 450 scan points covering up to the full low or high frequency range. Faster and more accurate measurement performance, you can easily cope with measurement testes in various fields.
- 2 in 1 Multifunctional Frequency Analyzer & Signal Generator :When not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz.Built-in calibration signal generator that is used for automatic self test and low input calibration.
- PC Control :Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer or Signal Generator.Tinysa-APP transfers data directly to the computer.The USB interface implements CDC protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.
- Ultra-long Battery Life :The upgraded tinysa analyzer built-in 3000m-ah rechargeable battery,with type-C charging cable and LED charging indicator,it can be fully charged within 3 hours,no need to charge frequently.
- 200Hz-850kHz RBW :The RBW is as low as 200Hz, which can effectively distinguish adjacent signals and meet the requirements of SSB dual-satellite inter-modulation test. Input Step attenuator from 0dB to 31dB (can not be used not in combination with LNA).
- Package List :1x Tinysa ULTRA Spectrum Analyzer; 2 x30cm ALSR100 SMA cables;1 x USB Type-C data cable;1 x SMA-SMA barrel connector ;1x TLanyard and touch plectrum;1 x Antenna with SMA connector.1 x32GB MicroSD card(plugged in the host), 1 x Touchscreen pen. It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Dimensions: 2.56 x 6.69 x 4.72 inches | Weight: 0.58 Pounds
See On Amazon #4
AURSINC NanoVNA-H4 Vector Network Analyzer, Lastest V4.3 10KHz-1.5GHz HF VHF UHF 4" Touch Screen Nanovna Antenna Analyzer Ham Radio, Measuring S Parameters, SWR, Phase, Delay, Smith Chart
Asin: B083PQ4RXZ
✔️[Antenna Performance Measurement] The Default Firmware Main Function For Vector Network Analyzer Is Used For Antenna Performance Measurement. It Has Good Rf Performance For S-Parameter Measurements As Previous Models. Note: The Nanovna Is Only Compatible With The Low-Speed And Supports Spi Mode Sd Cards For Now. It Is Very Efficient Vector Testing For Ham Radio Operator, Research Electrical Engineer And Antenna Builders.
✔️[What Are Included] Nanovna-H4 Host (With 1950Mah Battery) X1, Usb Type-C Data Cable X1, 30Cm/11.8Inch Sma Male To Male Rg174 Rf Cable X2, Sma Simple Calibration Kit (Open/Load/Short) X1, Sma Female To Female Connector X1, Lanyard With Stylus X1, Stylus Pen X1.
✔️[Pc & Android Control] Using Pc Software Nanovnasaver, Nanovna-H4 Antenna Analyzer Can Connect To A Nanovna And Extracts The Data For Display On A Computer, And For Saving To Touchstone Files. We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring.
✔️[Improved Frequency Algorithm] The Improved Frequency Algorithm Of Nanovna H4 Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic. The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics. Used It To Check Out New Cable Or Antenna Installations And To Routinely Adjust The Rf Tuner For Optimum.
Features
- [UPGRADED NANOVNA-H4 V4.3] AURSINC nanovna-h4 is a Hugen Origin that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 4inch LCD display, with 1950mAh battery powered or USB powered. With latest HW 4.3 version, Nanovna-h4 antenna analyzer is added a brand new panel plus added a new SD port for data storage(support up to 32GB memory card, not included in the package)
- [IMPROVED FREQUENCY ALGORITHM] The improved frequency algorithm of nanovna h4 can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic. The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics. Used it to check out new cable or antenna installations and to routinely adjust the RF tuner for optimum
- [ANTENNA PERFORMANCE MEASUREMENT] The default firmware main function for vector network analyzer is used for antenna performance measurement. It has good RF performance for S-parameter measurements as previous models. NOTE: the Nanovna is only compatible with the low-speed and supports SPI mode SD cards for now. It is very efficient vector testing for ham radio operator, research electrical engineer and antenna builders
- [PC & ANDROID CONTROL] Using PC software NanoVNASaver, NanoVNA-H4 antenna analyzer can connect to a NanoVNA and extracts the data for display on a computer, and for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring
- [WHAT ARE INCLUDED] NanoVNA-H4 host (with 1950mAh battery) x1, USB Type-C data cable x1, 30cm/11.8inch SMA male to male RG174 RF cable x2, SMA simple calibration kit (OPEN/LOAD/SHORT) x1, SMA female to female connector x1, Lanyard with stylus x1, stylus pen x1
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
See On Amazon #5
Upgraded NanoVNA-H4 Vector Network Analyzer, SeeSii Latest V4.3/4.2 10KHz-1.5GHz HF VHF UHF 4" Touch Screen Antenna Analyzer Measures S Parameters,Voltage Standing Wave Ratio, Phase,Delay, Smith Chart
Asin: B085CFHTBM | Model: NanoVNA-H4 | PartNumber: NanoVNA-H4 | Ean: 0889251537400 | UPC: 889251537400
😊【Improved Frequency Algorithm】:The Vector Network Analyzer Can Use The Old Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics.Great For Trouble Shooting Antennas And Improving Performance..
🎁【Abundant Accessories】:Equipped With 1X Nanovna-H4(With 1950Ma-H Battery), 1X Usb Type-C Cable, 2 X 15Cm Sma Male To Male Rg316 Rf Cable, 1X Sma Male Calibration Kit - Open,1X Sma Male Calibration Kit - Short ,1 X Sma Male Calibration Kit - Load,1 X Touchscreen Pen.It's Very Useful As An Antenna Analyzer For Your Ham Station, Easy To Set Without Fancy Calibration. Note: The Function Of The Versions 4.2/4.3 Is The Same, It Will Be Shipped Randomly..
😊【Pc Connection & Tx/Rx Function】:The Vna Analyzer Uses Pc Software Nanovnasaver, It Can Connect To A Nanovna And Extracts The Data For Display On A Computer For Saving To Touchstone Files. We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software.In Addition,The Default Firmware Is Mainly Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11/S21 Parameters (Need To Manually Replace The Transceiver Port Wiring)..
😊【Built-In Micro-Sd Port & Time Display】: The Lastest Antenna Analyzer With Microsd Card Port,So You Can Save Field Test Data Or Screens To A Microsd Card At Any Time,Support Up To 32Gb Memory Card. (Not Include In The Pacakge).In Addition, Different From Old Version Nanovnas, The Date And Time Can Be Customized, Which Is Convenient For You To Further Record And Save Data..The Default Firmware Main Function Is Used For Antenna Performance Measurement..
Features
- 2022 UPGRADED NANOVNA ANALYZER : SeeSii Nanovna-h4 Vector Network Analyzer is developed by Hugen. With latest 4.3 version,10KHz-1.5GHz measure range,4.0 inch LCD touchscreen,mini and portable design.This Antenna Analyzer is provides outstanding vector network measurement capabilities and perfect for evaluating antenna resonance and SWR.It is a very handy & smart analyzer for electronics engineer, amateur radio operators or radio diy amateurs.
- BUILT-IN MICRO-SD PORT & TIME DISPLAY : The lastest antenna analyzer with MicroSD card port,so you can save field test data or screens to a MicroSD card at any time,support up to 32GB memory card. (Not include in the pacakge).In addition, different from old version NanoVNAs, the date and time can be customized, which is convenient for you to further record and save data..The default firmware main function is used for antenna performance measurement.
- IMPROVED FREQUENCY ALGORITHM :The Vector Network Analyzer can use the old harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.Great for trouble shooting antennas and improving performance.
- PC CONNECTION & TX/RX FUNCTION :The vna analyzer uses PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data for display on a computer for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software.In addition,the default firmware is mainly used for antenna performance measurement. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring).
- Abundant Accessories :Equipped with 1x NanoVNA-H4(with 1950mA-h battery), 1x USB Type-C cable, 2 x 15cm SMA male to male RG316 RF cable, 1x SMA male calibration kit - OPEN,1x SMA male calibration kit - SHORT ,1 x SMA male calibration kit - LOAD,1 x Touchscreen pen.It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration. Note: The function of the versions 4.2/4.3 is the same, it will be shipped randomly.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Weight: 1.00 Pounds
See On Amazon #6
2023 4Inch TinySA Ultra Spectrum Analyzer 100kHz-5.3GHz,V0.4.5.1 Portable Tiny Frequency Analyzer with 32GB SD Card & 3000mAh Battery, 2-in-1 RF Signal Generator RBW LNA DANL Phase Noise
Asin: B0BPXXLNPH | Ean: 5057803519340
【Used As Signal Generator】It Is 2 In 1 Device, Can Be Used As Signal Generator. Built-In Calibration Signal Generator That Is Used For Automatic Self Test And Low Input Calibration. 100K-800Mhz Sine Wave Output; 800Mhz-4.4Ghz Square Wave Output; 4.4Ghz-5.4Ghz Mixing Signal Output..
【3000Mah Rechargeable Battery & Pc Control】 The Tinysa Analyzer Built-In 3000Mah Rechargeable Battery，Can Be Used For Up To 8 Hours. Support Pc Control，You Can Also Transfer Data To Your Computer Through Tinysa-App Connection. The Driver For Windows Will Install Automatically After Connecting To A Windows Pc. The Driver For Linux Is Built Into The Kernel..
【Include 32Gb Sd Card】 This Ultra Spectrum Analyzer Built-In 32Gb Micro Sd Card, Can Directly Record Data To The Card ,Which Is Convenient For Your Data Sharing And Storage. You Won't Be Bothered By Saving Data Any More, And Can Take Tinysa For Use At Anywhere And Anytime.N 240Mhz-960Mhz..
【Frequency Range】Ultra Tinysa Has 100Khz To 5.3Ghz Ultra-Wide Measuring Frequency Range, Spectrum Analyzer For 0.1-800Mhz. In Ultra Mode, Up To 0.1Mhz-6Ghz. It Has 200Hz-850Khz Rbw, Adjacent Signals Effectively Distinguished When Rbw Reach 200Hz, Meet Ssb Two-Tone Test Requirements, Maximum Width 850Khz, Rbw Implements Fast Scanning..
Features
- New TinySA Ultra Mode The ULTRA Tinysa developed by Hugen can reach an ultra-wide frequency range from 100kHz to 5.3GHz. The 4-inch large screen provides clear data images and sensitive operation touch. It also has a new ESD protection function, installed the latest hardware system V0.4.5.1, professional and stable.
- Frequency Range ULTRA tinysa has 100kHz to 5.3GHz ultra-wide measuring frequency range, spectrum analyzer for 0.1-800MHz. In Ultra mode, up to 0.1MHz-6GHz. It has 200Hz-850kHz RBW, adjacent signals effectively distinguished when RBW reach 200Hz, meet SSB two-tone test requirements, maximum width 850kHz, RBW implements fast scanning.
- Used As Signal Generator It is 2 in 1 device, can be used as Signal Generator. Built-in calibration signal generator that is used for automatic self test and low input calibration. 100k-800MHz sine wave output; 800MHz-4.4GHz square wave output; 4.4GHz-5.4GHz mixing signal output.
- Include 32GB SD Card This ULTRA spectrum analyzer built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage. You won't be bothered by saving data any more, and can take tinysa for use at anywhere and anytime.n 240MHz-960MHz.
- 3000mAh Rechargeable Battery & PC Control The tinysa analyzer built-in 3000mAh rechargeable battery can be used for up to 8 hours. Support PC Control you can also transfer data to your computer through tinySA-APP connection. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.
- See more on Amazon...
Brand: SDRGEEK | Manufacturer: SDRGEEK
See On Amazon #7
Portable TinySA Spectrum Analyzer,SEESII Upgraded V0.3.1 Handheld Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input,Signal Generator with 2.8 inch Touch Screen with ESD Protect Function
Asin: B08FB5XT7B | Model: TinySA | PartNumber: TinySA | Ean: 6933834650971
【Tiny Spectrum Analyzers & Esd Function】Switchable Resolution Bandpass Filters For Both Ranges Between 2.6Khz And 640Khz.Color Display Showing 290 Scan Points Covering Up To The Full Low Or High Frequency Range. Bulit-In Rechargeable Battery Allowing A Minimum Of At Least 2 Hours Portable Use.The Performance Of The 2021 Latest Version 3.1 Will Be More Stable And Sensitive, With A New Esd Protrcted Function Enable The Product To Have A Higher Antistatic Level And A Longer Service Life..
【Package List】1X Tiny Spectrum Analyzer; 2 X 20Cm Rf Cable;1 X Usb Cable;1 X Sma Female To Female Connector;1X Touchscreen Pen;1 X Sma Telescopic Antenna.It's Very Useful As An Antenna Analyzer For Your Ham Station, Easy To Set Without Fancy Calibration.The Firmware Of The Tinysa Can Be Updated By The User. New Versions Of The Firmware Needed Please Contact Seller For Download Link..
【Pc Control】Connected To A Pc Via Usb It Becomes A Pc Controlled Spectrum Analyzer.The Usb Interface Implements The Serial Over Usb (Cdc) Protocol And There Is A Large Set Of Commands That Can Be Invoked Over The Serial Interface. These Command Can Be Used To Perform Measurements Or Update Internal Settings. The Driver For Windows Will Install Automatically After Connecting To A Windows Pc. The Driver For Linux Is Built Into The Kernel..
【Built-In Calibration Signal Generator】When Not Used As Spectrum Analyzer It Can Be Used As Signal Generator, Mf/Hf/Vhf Sinus Output Between 0.1Mhz-350Mhz, Uhf Square Wave Output Between 240Mhz-960Mhz. Built-In Calibration Signal Generator That Is Used For Automatic Self Test And Low Input Calibration..
Features
- Frequency Range Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer.
- Built-in Calibration Signal Generator When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration.
- Tiny Spectrum analyzers & ESD Function Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life.
- PC Control Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.
- Package List 1x Tiny Spectrum Analyzer; 2 x 20cm RF Cable;1 x USB Cable;1 x SMA Female to Female Connector;1x Touchscreen Pen;1 x SMA Telescopic Antenna.It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.The firmware of the tinySA can be updated by the user. New versions of the firmware needed please contact seller for download link.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Weight: 2.20 pounds
See On Amazon #8
Spectrum Analyzer, 2023 Upgraded TinySA Ultra Spectrum Analyzer with 4.0 Inch Sensitive Touch Screen, Handheld Tiny Frequency Analyzer ith 32Gb Card, 2-in-1 Signal Generator
Asin: B0C9M77B8T
【Frequency Analyzer And Signal Generator 2-In-1】：When Not Used As A Spectrum Analyzer,It Can Be Used As A Signal Generator With A Built-In Calibration Signal Generator For Automatic Self-Test And Low Input Calibration.100K-800Mhz Sine Wave Output; 800Mhz-4.4Ghz Square Wave Output; 4.4Ghz-5.4Ghz Mixing Signal Output..
【Package List】:1X Tinysa Ultra Spectrum Analyzer; 2 X30cm Alsr100 Sma Cables;1 X Usb Type-C Data Cable;1 X Sma-Sma Barrel Connector ;1X Tlanyard And Touch Plectrum;1 X Antenna With Sma Connector.1 X32gb Microsd Card(Built Into The Device), 1 X Touchscreen Pen..
【Pc Control】：This Tinysa Spectrum Analyzer Can Connect To The Pc Through Usb,Realize The Usb Serial (Cdc) Protocol,And Can Call A Large Number Of Commands.Built-In Linux Driver,After Connecting To The Windows Computer,The Windows Driver Will Be Automatically Installed..
【Frequency Range】：Compared To Tinysa (100Khz To 960Mhz),Tinysa Ultra Has A Wider Measurement Frequency Range (100Khz To 5.3Ghz),Up To 0.1Mhz-6Ghz In Ultra Mode,Switchable Resolution Band Pass Filters For Both Ranges Between 200Hz To 850Khz.Color Display Showing 450 Scan Points Covering Up To The Low Full Or High Frequency Range.Measurement Performance Is More Faster, Accurater..
Features
- 2023 New Upgrade Enhanced Version This newly upgraded TinySA ultra spectrum analyzer produced by Hugen, equipped with 3000mAh rechargeable lithium battery,can work continuously for more than 8 hours,adopts 4-inch touch display screen,provides clear data images and sensitive operation touch,also have the new ESD protection function,installed the latest V 0.4.5.1 hardware system,and built-in 32Gb micro SD card
- Frequency Range Compared to Tinysa (100kHz to 960MHz),TinySA Ultra has a wider measurement frequency range (100kHz to 5.3GHz),up to 0.1MHz-6GHz in Ultra mode,Switchable resolution band pass filters for both ranges between 200Hz to 850kHz.Color display showing 450 scan points covering up to the low full or high frequency range.Measurement performance is more faster, accurater.
- Frequency Analyzer and Signal Generator 2-in-1 When not used as a spectrum analyzer,it can be used as a signal generator with a built-in calibration signal generator for automatic self-test and low input calibration.100k-800MHz sine wave output; 800MHz-4.4GHz square wave output; 4.4GHz-5.4GHz mixing signal output.
- PC Control This TinySA spectrum analyzer can connect to the PC through USB,realize the USB serial (CDC) protocol,and can call a large number of commands.built-in Linux driver,after connecting to the Windows computer,the Windows driver will be automatically installed.
- Package List :1x Tinysa ULTRA Spectrum Analyzer; 2 x30cm ALSR100 SMA cables;1 x USB Type-C data cable;1 x SMA-SMA barrel connector ;1x TLanyard and touch plectrum;1 x Antenna with SMA connector.1 x32GB MicroSD card(Built into the device), 1 x Touchscreen pen.
- See more on Amazon...
Brand: TOSTOG | Manufacturer: TOSTOG
See On Amazon #9
AURSINC NanoVNA-F V2 Vector Network Analyzer, 50KHz-3GHz Antenna Analyzer Ham Radio HF VHF UHF 4.3inch screen 5000mAh Battery Measuring S-Parameters Voltage Standing Wave Ratio Phase Delay Smith Chart
Asin: B0B42C2H5V | Model: NanoVNA-F V2 | PartNumber: NanoVNA-F V2
[Design Of Aluminum Cases] Rugged And Durable Aluminum Alloy Cases, Shielding Electromagnetic Interference To Ensure Precise Measurements. The Sma Radio Frequency Interface Enables Seamless Connectivity With Various Measurement Devices.
[Packing List] 1X Nanovna F V2 Host, 1X Sma Open Calibration Kit, 1X Sma Short-Circuit Calibration Kit, 1X Sma 50Ω Load Calibration Kit, 1X Sma-Kk Double-Head Female Hole Adapter, 1X Sma-Jj Double-Head Male Pin Adapter, 1X Sma-Jkw Elbow Outer Screw Inner Hole To Inner Screw Inner Needles Adapter, 2X 20Cm Sma-Jj Rg405 Rf Cable, 1X Usb Type-C Data Cable, 1X Stylus.
[Pc & Android Phone Control] Nanovna F V2 Hardware Is Supported By A Program "Nanovna Saver", Using Nanovna-Saver Connect To The Nanovna, Extracts Data For Display And Save Data In Touchstone Files. The Scada Software Enables Us To Export Touchstone (Snp) Files For Various Radio Design And Simulation Software. Supports Android Mobile Phone Only (Please Download The Product Document For Details).
[Nanovna Saver Notes] It Could Run On Windows 7 Embedded Control System With Your Own Software. For Win8 And Earlier Versions Of The Windows System, You Need To Install The Driver: St.Com/En/Development-Tools/Stsw-Stm32102.Html. For Nanovna-Saver You Need To Try, We Do Not Support Any Win10 Earlier Versions System. Software Upgrade The Website: Sysjoint.Com/En/Content/?144.Html. Any Questions Please Contact Us..
[4.3'' Screen & 5000Mah Battery] The Nano Vna Has A 4.3-Inch Ips Tft Lcd Screen With A Resolution Of 800*480 And A Resistive Touch Screen, Providing A Large Viewing Angle. It Is Equipped With An 5000Mah Lithium Battery For Longer Standby Time, Up To 7 Hours Of Usage. With The Use Of A 2A Large-Current Charging Ic, The Charging Time Is Reduced. As An Add-On, It Built-In 5V Output For Charging Android Phones Or Tablets.
[Frequency Range] The Measurement Range Of Nanovna-F V2 Expanded To 50Khz-3Ghz. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters, S21 Dynamic Ranges: 70Db (1.5Ghz), 60Db (3Ghz); S11 Dynamic Ranges: 50Db (1.5Ghz), 40Db (3Ghz).
Features
- [Upgraded Version] The NanoVNA-F V2 upgraded to the latest firmware V0.4.0, the operation page is compatible with Nanovna-F. More features that it enables measurements of S-parameter, voltage standing wave ratio (SWR), phase map, group delay, Smith chart, DELAY, POLAR, LINEAR and more
- [Frequency Range] The measurement range of nanovna-f v2 expanded to 50KHz-3GHz. The TX/RX method can measure the complete S11 and S21 parameters, S21 dynamic ranges: 70dB (1.5GHz), 60dB (3GHz); S11 dynamic ranges: 50dB (1.5GHz), 40dB (3GHz)
- [Design of Aluminum Cases] Rugged and durable aluminum alloy cases, shielding electromagnetic interference to ensure precise measurements. The SMA radio frequency interface enables seamless connectivity with various measurement devices
- [4.3'' Screen & 5000mAh Battery] The nano vna has a 4.3-inch IPS TFT LCD screen with a resolution of 800*480 and a resistive touch screen, providing a large viewing angle. It is equipped with an 5000mAh lithium battery for longer standby time, up to 7 hours of usage. With the use of a 2A large-current charging IC, the charging time is reduced. As an add-on, it built-in 5V output for charging Android phones or tablets
- [PC & Android Phone Control] NanoVNA F V2 hardware is supported by a program NanoVNA Saver, using Nanovna-Saver connect to the nanovna, extracts data for display and save data in Touchstone files. The SCADA software enables us to export Touchstone (snp) files for various radio design and simulation software. Supports Android Mobile Phone only (Please download the product document for details)
- [NanoVNA Saver Notes] it could run on windows 7 embedded control system with your own software. For Win8 and earlier versions of the Windows system, you need to install the driver: st.com/en/development-tools/stsw-stm32102.html. For NanoVNA-Saver you need to try, we do not support any win10 earlier versions system. Software Upgrade the website: sysjoint.com/en/content/?144.html. Any questions please contact us.
- [Packing List] 1x Nanovna f v2 Host, 1x SMA Open Calibration Kit, 1x SMA Short-circuit Calibration Kit, 1x SMA 50 Load Calibration Kit, 1x SMA-KK Double-Head Female Hole Adapter, 1x SMA-JJ Double-Head Male Pin Adapter, 1x SMA-JKW Elbow Outer Screw Inner Hole To Inner Screw Inner Needles Adapter, 2x 20cm SMA-JJ RG405 RF Cable, 1x USB Type-C Data Cable, 1x Stylus
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Dimensions: 0.80 x 5.10 x 2.85 inches | Weight: 0.94 pounds
See On Amazon #10
RF Test Board, 18 Functional Modules RF Demo Kit NanoVNA RF Test Module Vector Network Analyzer Board Filter/Attenuator Module
Asin: B082MHWTT9 | Ean: 0738587184799 | UPC: 738587184799
【Specification 】--Rlc Series And Parallel Circuit Includes R, L, C And Combinational Circuits;Open /Short Circuit And Load Calibration Circuit;The Attenuation Circuit..
【Quality Assurance】-- 100% Brand New And The Quality Of Our Products Is Guaranteed And Can Be Used Without Hesitation. If You Have Any Questions During Use, Please Feel Free To Contact Us..
【18 Functional Modules& 2 Pcs Of Ufl Patch Cord】-- The Board Is Totally Integrated With 18 Functional Modules.Equipped With 2 Pcs Of Ufl Patch Cord For Convenient Use.Each Module Is Well Selected Of High Quality And Great Reliability.The Board Is Small And Light ,Suitable For Carrying With..
【The Filter】--Short-Wave Low-Pass Filter Lpf: 30Mhz;Fm High-Pass Filter Hpf: 100Mhz;Commonly Used Saw Bandpass Filter Bpf: 433Mhz;Video Ceramic Trap Bsf: 6.5Mhz.
Features
- RF Test Board --RF Demo Kit RF test board demo calibration board for learning Vector Network Analyzer , Antenna Analyzer test calibration learning.the RF test board is useful for beginners who want to discover the secrets of spectrum/vector analyzer.
- The Filter --Short-wave low-pass filter LPF: 30MHz;FM high-pass filter HPF: 100MHz;Commonly used SAW bandpass filter BPF: 433MHz;Video ceramic trap BSF: 6.5MHz
- Specification --RLC series and parallel circuit Includes R, L, C and combinational circuits;Open /short circuit and load calibration circuit;The attenuation circuit.
- 18 Functional Modules& 2 Pcs Of Ufl Patch Cord -- The board is totally integrated with 18 functional modules.Equipped with 2 pcs of UFL patch cord for convenient use.Each module is well selected of high quality and great reliability.The board is small and light ,suitable for carrying with.
- Quality Assurance -- 100% brand new and the quality of our products is guaranteed and can be used without hesitation. If you have any questions during use, please feel free to contact us.
- See more on Amazon...
Brand: Yanmis | Manufacturer: Yanmis
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.09 pounds
See On Amazon #11
AURSINC NanoVNA Vector Network Analyzer, 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Ham Radio with 2.8'' Touchscreen HW V3.5, Measuring S Parameters, Voltage Standing Wave Ratio, Phase Delay Smith Chart
Asin: B07T6LXNTV | Model: NanoVNA 2.8'' | PartNumber: NanoVNA 2.8'' | Ean: 0753318592193 | UPC: 753318592193
[Measurement Frequency] Measurement Frequency Of Nanovna Is 10Khz - 1.5Ghz (50Khz -900Mhz, Enable Extended Firmware). Measurement Range: 70Db (50Khz-300Mhz), 60Db (300M-900Mhz), 40Db (900Mhz-1.5Ghz) Enable Extended Firmware. The Improved Frequency Algorithm Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz.
[Package List] 1X Nanovna Host (With 650Ma-H Battery, Without Case, Came In A Plastic Case), 1X Usb Type-C Data Cable, 2X 30Cm Sma Male To Male Rg174 Rf Cable, 1X Sma Simple Calibration Kit, 1X Sma Female To Female Connector.
[Accurate Measurement] The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring. The Ch0 Output Level Is Increased To 0Dbm When Using The Fundamental Wave, Resulting In More Accurate Reflection Measurement.
[More Functionality] Measuring Amplifier Gain, Bandwidth, Phase Frequency Characteristics, Transmission Line Loss, Characteristic Impedance, Coupler Coupling, Isolation, Filter, Diplexer Passband And So On. You Can Being Able To See A Graph Of The Swr Of A Given Antenna Over A Sweep That You Get To Set Start And Stop. Excellent Performance For Radio Amateurs.
[Pc Control] Designed A Practical And Simple Control Application On Pc, You Can Download Touchstone(Snp) Files For Radio Design And Simulation Software. There's Nanovnasharp Software Available For Pc And Linux (Github.Com/Mihtjel/Nanovna-Saver/Releases), Supports Control And Real-Time Display. You Can Connect The Nanovna To Your Pc For A Large Screen Display With A Usb-C Cable.
[Licensing And Firmware] Developed By Hugen, More Info Pls View "Nanovna-Users@Groups.Io". The Firmware Version Of Nano Vna Is Hw V3.5. It Is Upgradeable As New Firmware Is Developed (Github.Com/Ttrftech/Nanovna). The Default Firmware Of Aursinc Nanovna Main Function Is Used For Antenna Performance Measurement.
Features
- [Designed for DIY] This nanovna is a DIY product (no enclosure) that provides perfect vector network measurement capabilities in a credit card-sized design, featuring a 2.8-inch TFT touch screen (320 x240) and a 650mAh battery for up to 2 hours. Added battery management circuit to reduce power noise, USB power interference, charging current, and protects the battery
- [Licensing and Firmware] Developed by Hugen, more info pls view nanovna-users@groups.io. The firmware version of nano vna is HW V3.5. It is upgradeable as new firmware is developed (github.com/ttrftech/NanoVNA). The default firmware of AURSINC nanovna main function is used for antenna performance measurement
- [Measurement Frequency] Measurement frequency of nanovna is 10KHz - 1.5GHz (50KHz -900MHz, enable extended firmware). Measurement range: 70dB (50kHz-300MHz), 60dB (300M-900MHz), 40dB (900MHz-1.5GHz) enable extended firmware. The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz
- [PC Control] Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software. There's NANOVNASHARP software available for PC and Linux (github.com/mihtjel/nanovna-saver/releases), supports control and real-time display. You can connect the nanovna to your PC for a large screen display with a USB-C cable
- [Accurate Measurement] The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. The CH0 output level is increased to 0dBm when using the fundamental wave, resulting in more accurate reflection measurement
- [More Functionality] Measuring amplifier gain, bandwidth, phase frequency characteristics, transmission line loss, characteristic impedance, coupler coupling, isolation, filter, diplexer passband and so on. You can being able to see a graph of the SWR of a given antenna over a sweep that you get to set start and stop. Excellent performance for radio amateurs
- [Package list] 1x NanoVNA host (with 650mA-h battery, without case, came in a plastic case), 1x USB Type-C data cable, 2x 30cm SMA male to male RG174 RF cable, 1x SMA simple calibration kit, 1x SMA female to female connector
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Dimensions: 0.47 x 2.13 x 3.35 inches | Weight: 0.22 Pounds
See On Amazon #12
Upgraded NanoVNA 50kHz-6.3GHz Vector Network Analyzer, Seesii 4 inch Antenna Analyzer with MicroSD Slot, Support Data Storage,Measure S Parameters HF VHF UHF SWR Phase Delay Smith Chart
Asin: B09M6F9NLR
😊【Built-In Micro-Sd Port & Time Display】: The Lastest Antenna Analyzer With Microsd Card Port,So You Can Save Field Test Data Or Screens To A Microsd Card At Any Time,Support Up To 32Gb Memory Card. (Not Include In The Pacakge).In Addition, Different From Old Version Nanovnas, The Date And Time Can Be Customized, Which Is Convenient For You To Further Record And Save Data..
😊 【Widely Application】:This Network Vector Analyzer Is Mini But Powerful Design.It Can Measure Almost All Ra-Dio Equipment:Swr/Smith/Short Wave/Mf/Hf/Vhf/Ssb/Balun/Tdr/Dtf/Logmag/Phase/Delay/Polar/Linear/Real/Imag/Resistance/Reactance/Antenna/Filter/Duplexer, Is Capable Of Meeting Common Amateur Radio And Iot Applications, As Well As Emerging 5Ghz Testing, Enabling The Application Of The Latest 5.8Ghz Wifi And 5.8Ghz Image Transmission..
😊【Ultra-Long Battery Life & Pc Control】:The Upgraded Nano Vna Analyzer Built-In 2000 3.7V Rechargeable Battery,With Type-C Charging Cable,Can Be Fully Charged Within 3 Hours,No Need To Charge Frequently. Above All, It Supports Pc Control, Compatible With Linux, Windows (7+), Mac Os (10.11+). Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software..
😊【50Khz-6.3Ghz Frequency Rang】: Compared To The Previous Nanovnas (10Khz-1.5/3Ghz), Seesii Antenna Analyzer Has 50Khz-6.3Ghz Ultra-Wide Measuring Frequency Range With Precision And Accuration Improved. Not Only Testing Standing Wave Impedance Of The Antenna, But Also Can Debug The Duplexer, The Insertion Loss Of The Filter, The Isolation And Testing The Attenuation Of The Cable, Shorten The Coefficient, The Phase, The Amplification Of The Antenna Amplifier..
Features
- 2022 UPGRADED NANOVNA ANALYZER : SeeSii Vector Network Analyzer is developed by Hugen.With 50kHz-6.3GHz measure range, 4.0 inch 480 x 320 touchscreen,mini and portable design.In order to minimize power consumption and size, the analyzer uses only one mixer, which allows S11 and S21 measurements through internal RF switching and can allows TDR and DTF measurements through IFFT calculations.
- 50kHz-6.3GHz FREQUENCY RANG : Compared to the previous NanoVNAs (10KHz-1.5/3GHz), SeeSii antenna analyzer has 50KHz-6.3GHz ultra-wide measuring frequency range with precision and accuration improved. Not only testing standing wave impedance of the antenna, but also can debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier.
- BUILT-IN MICRO-SD PORT & TIME DISPLAY : The lastest antenna analyzer with MicroSD card port,so you can save field test data or screens to a MicroSD card at any time,support up to 32GB memory card. (Not include in the pacakge).In addition, different from old version NanoVNAs, the date and time can be customized, which is convenient for you to further record and save data.
- ULTRA-LONG BATTERY LIFE & PC CONTROL :The upgraded nano vna analyzer built-in 2000 3.7V rechargeable battery,with type-C charging cable,can be fully charged within 3 hours,no need to charge frequently. Above all, it supports PC control, compatible with Linux, Windows (7+), Mac OS (10.11+). Can export Touchstone (snp) files for various radio design and simulation software through PC software.
- WIDELY APPLICATION :This network vector analyzer is mini but powerful design.It can measure almost all ra-dio equipment:SWR/SMITH/SHORT WAVE/MF/HF/VHF/SSB/BALUN/TDR/DTF/LOGMAG/PHASE/DELAY/POLAR/LINEAR/REAL/IMAG/RESISTANCE/REACTANCE/Antenna/Filter/Duplexer, is capable of meeting common amateur radio and IoT applications, as well as emerging 5GHz testing, enabling the application of the latest 5.8GHz wifi and 5.8GHz image transmission.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Dimensions: 1.97 x 6.30 x 3.94 Inches | Weight: 2.20 pounds
See On Amazon #13
Nanovna SAA-V2 Vector Network Analyzer 10KHz~3GHz HF VHF UHF Antenna Analyzer 3.2" inch Touchscreen with Case,Measuring Duplexer, The Filter,S Parameters, Voltage Standing Wave Ratio, Phase,Delay
Asin: B08BRYTHVG | Model: NanoVNA SAA-V2 | PartNumber: NanoVNA SAA-V2 | Ean: 6933834581510
Improved Accuracy: Nanovna Saa-V2 Vector Antenna Analyzer Equipped With The Upgraded Shell,Strong Anti-Interference, Improve Accuracy.With 3.2 Inch Touch Screen And Touchscreen Pen,Make More Accurate And Easy To Operate..
Compatible :The 3Ghz Second-Generation Nanovna Vector Network Analyzer Is Based On Owocomm's S-A-A-2 Design, And Its Performance Is Greatly Upgraded.Can Be Control By Pc,Computer Software Compatible With Linux, Windows (7+).
Powerful Secure Power Supply: This Saa-V2 Is Battery Powered Or Usb Powered; Built In 2000Ma-H Battery, Could Work For About 3 Hours Continuously, If Need Extra Working Time, It Can Be Connected To Power Bank Or Power Source..
Powerful Frequency Meter: The Improved Frequency Measurement Can Measure The Antenna Frequency Of 2.4G Up To To 3G. 70Db(50Khz-1.5Ghz), 60Db(1.5Ghz-3Ghz). Reflection Measure S11: 50Db(50Khz-1.5Ghz), 40Db(1.5Ghz-3Ghz); Antenna Analyzer: 1.005(50Khz - 1.5Ghz), 1.02(1.5Ghz-3Ghz).
Features
- NEW UPGRADE FNCTION : Own our Seesii 3GHz Vector Network Analyzer,you can test the standing wave impedance of the antenna, you can also debug the duplexer, the insertion loss of the filter, the isolation, the standing wave, you can also test the attenuation of the cable, shorten the coefficient, the phase, you can also test the amplification of the antenna amplifier
- POWERFUL FREQUENCY METER: The improved frequency measurement can measure the antenna frequency of 2.4G up to to 3G. 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: 50dB(50KHz-1.5GHz), 40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
- IMPROVED ACCURACY: NanoVNA SAA-V2 Vector Antenna analyzer equipped with the upgraded shell,Strong anti-interference, improve accuracy.with 3.2 inch touch screen and touchscreen pen,make more accurate and easy to operate.
- POWERFUL SECURE POWER SUPPLY: This SAA-V2 is battery powered or USB powered; Built in 2000mA-h battery, could work for about 3 hours continuously, if need extra working time, it can be connected to power bank or power source.
- COMPATIBLE :The 3GHz second-generation NanoVNA vector network analyzer is based on OwOComm's S-A-A-2 design, and its performance is greatly upgraded.Can be control by PC,computer software compatible with Linux, Windows (7+)
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Weight: 1.00 pounds
See On Amazon #14
Elikliv NanoVNA-H Vector Network Analyzer, 10KHz -1.5GHz Latest HW Version 3.6 VNA Analyzer, HF VHF UHF Antenna Analyzer Measuring S Parameters, VSWR and Peak Analysis, Phase, Delay, Smith Chart
Asin: B0CTH1L4PL
✅[[Pc Control]: This Nanovna Can Be Controled By Pc Using Software Vna Saver. The Software Has A Number Of Features Such As The Ability To Run Many Smaller Frequency Sweeps (The Nanovna Takes 101 Measurements Across A Sweep) And Combine The Results To Get A Higher Resolution Sweep..
👍[Summarize The Above Information]: The Newly Upgraded Nanovna-H Is Equipped With A Compact 2.8 Inch Display. A Frequency Sweep Range Of 10Khz-1.5Ghz Is Available To Meet Your Various Measurement Needs. High Accuracy And Built-In 650Mah Rechargeable Battery. This Nanovna Can Be Controled By Pc Using Software Vna Saver. Detailed Parameter Information Can Be Found On The Product Description Page. Feel Free To Contact Us With Any Questions..
✅[Great Choice For Radio Operator Or Enthusiast]: This Spectrum Analyzer Will Be A Nice Little Addition To The Workbench, Which Is A Very Handy Analyzer For The Amateur Radio Operator Or Radio Enthusiast. The Smith Chart Is Very Handy To Have As Well As Being Able To See Reflected Db. You Get A Lot Of Information From This Little Unit, Connect It To Your Pc And Is Able To Save A .Cal File For A Certain Frequency Which Saves Your Time.
🎁[Complete Vna Set, Out Of The Box]: With All The Attachments, This Antenna Analyzer Kit Comes In Quite A Nice Cardboard Box. Inside Content Includes: 2.8 Inch Nanovna Host (With Battery) Display X1, Usb Type-C Data Cable X1, 30Mm Sma Male To Male Rg174 Rf Cable X2, Sma Simple Calibration Kit X1, Sma Female To Female Connector X1..
✅[Multiple Functions]: There Are Also Averaging Functions And Allows You To Do Time Domain Reflectometry Which Can Be Useful For Detecting Damaged Cable Runs. It Also Allows Easier Readoff Of Datapoints Using Markers..
✅[Improved Performance & Built Quality]: With Outstanding Performance, The Display Quality Is Very Crisp.This Nanovna Is Perfect For Evaluating Antenna Resonance And Swr, Touch Screen Is Responsive And Can By Navigated With A Finger. With Good Accuracy And Built In 650Mah Rechargeable Battery, Can Be Used In Ham Radio Shack..
Features
- [Upgraded NanoVNA-H HW V3.6]: The Upgraded V3.6 Antenna Analyzer widened frequency scan range (10KHz-1.5GHz) to measure RF S11 (reflection), S21 (forward gain), and related parameters. Designed with a SD Card Port, this new nanovna is convenient for your data storage and sharing.
- [Improved Performance & Built Quality]: With outstanding performance, the display quality is very crisp.This nanoVNA is perfect for evaluating antenna resonance and SWR, touch screen is responsive and can by navigated with a finger. With good accuracy and built in 650mAh rechargeable battery, can be used in ham radio shack.
- [[PC Control]: This nanoVNA can be controled by PC using software VNA Saver. The software has a number of features such as the ability to run many smaller frequency sweeps (the nanoVNA takes 101 measurements across a sweep) and combine the results to get a higher resolution sweep.
- [Multiple Functions]: There are also averaging functions and allows you to do time domain reflectometry which can be useful for detecting damaged cable runs. It also allows easier readoff of datapoints using markers.
- [Great Choice for Radio Operator or Enthusiast]: This spectrum analyzer will be a nice little addition to the workbench, which is a very handy analyzer for the amateur radio operator or radio enthusiast. The smith chart is very handy to have as well as being able to see reflected db. You get a lot of information from this little unit, connect it to your PC and is able to save a .cal file for a certain frequency which saves your time
- [Complete VNA Set, Out of the Box]: With all the attachments, this antenna analyzer kit comes in quite a nice cardboard box. Inside content includes: 2.8 inch NanoVNA host (with battery) display x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1.
- [Summarize the Above Information]: The newly upgraded NanoVNA-H is equipped with a compact 2.8 Inch display. A frequency sweep range of 10KHz-1.5GHz is available to meet your various measurement needs. High accuracy and built-in 650mAh rechargeable battery. This nanoVNA can be controled by PC using software VNA Saver. Detailed parameter information can be found on the product description page. Feel free to contact us with any questions.
- See more on Amazon...
Brand: Elikliv | Manufacturer: Elikliv
See On Amazon #15
Seesii NanoVNA-F V3 Vector Network Analyzer, [Upgraded] 1MHz-6GHz 4.3 Inch HF VHF UHF VNA Antenna Analyzer, Measuring S-Parameter Voltage SWR,Phase,Delay,Smith Chart,RTC Real-time,801 Scan Points
Asin: B0CCTC88RX | Model: Seesii NanoVNA-F V3 | PartNumber: Seesii NanoVNA-F V3
👍【Trustworthy Quality】:This Nano Vna Analyzer Measuring Tool Is Made Of Metal Material, Which Is Durable And Can Effectively Shield Electromagnetic Interference. With Sma Connector Design Which Can Be Used To Connect Duts Directly.In Addition,It Is Support Pc Software Control And Compatible With Nanovna-Saver For Convenient Measurement Data Transfer.Built-In 4500M-Ah Rechargeable Battery,With Type-C Charging Cable And Led Charging Indicator,It Can Be Fully Charged Within 3 Hours,No Need To Charge Frequently..
🎁【What You Will Get:】: Seesii Upgraded Value Nanovna-F V3 Kit Includes 1 X Nanovna-F V3,1 X Gold-Plated Sma Calibration Kit (Load, Open And Short),1 X Sma Female To Sma Female Connector,1 X Sma Male To Sma Male Connector,1 X Sma Jkw Connector,2 X 20Cm/7.9" Rg405 Cables,1 X Usb Type-C Data Cable. Seesii Provides 7*24 Hours Technical Service And 90-Day Money-Back Service, 3 Years Warranty Lifetime Customer Support. You Can Use It With Confidence..
🎖️【Multiple Measurement Functions】: Seesii Nanovna-F V3 Antenna Analyzer Is Suitable For Antenna Testing Of Mf/Hf/Vhf/Uhf/Shf Bands. Supports A Variety Of Display Formats: Log Mag, Linear Mag, Phase, Smith R+Jx, Smith R+L/C, Vswr, Polar, Group Delay, Resistance, Reactance, Etc. It Can Also Be Used To Measure Filters, Amplifiers, Attenuators, Cables, Power Dividers, Couplers, Duplexers And Other Rf Components. For The Amateur Radio Operator Or Radio Enthusiast, This Latest Vna Antenna Analyzer Will Be A Very Handy Analyzer To Have..
✅【Widely Frequency Range】:Compared To The Nanovna-F V2 (50Khz-3Ghz), The Upgraded Nanovna-F V3 Has 1Mhz-6Ghz Ultra-Wide Measuring Frequency Range, The S21 Dynamic Range Of Nanovna-F V3 Is 65 Db, While The S11 Dynamic Range Is 50 Db. The Scan Points Is Up To 101-801 And The Calibration Result Storage Is 12, Covering Up To The Full Low Or High Frequency Range. Faster And More Accurate Measurement Performance, You Can Easily Cope With Measurement Testes In Various Fields..
Features
- Improved Performance :This NanoVNA-F V3 vna analyzer is a new production machine from 2023, with 4.3 inch 800 x 480 large touchscreen display, 1MHz to 6GHz widely measuring range, the scan speed of NanoVNA-F V3 is up to 200 points/s and the maximum scanning points is up to 801.In addition, the nanovna analyzer supports TDR function which is useful for cable lengths measurement.
- Widely Frequency Range :Compared to the Nanovna-F V2 (50kHz-3GHz), the upgraded Nanovna-F V3 has 1MHz-6GHz ultra-wide measuring frequency range, The S21 dynamic range of NanoVNA-F V3 is 65 dB, while the S11 dynamic range is 50 dB. The scan points is up to 101-801 and the calibration result storage is 12, covering up to the full low or high frequency range. Faster and more accurate measurement performance, you can easily cope with measurement testes in various fields.
- Trustworthy Quality :This nano vna analyzer measuring tool is made of metal material, which is durable and can effectively shield electromagnetic interference. With SMA connector design which can be used to connect DUTs directly.In addition,it is support PC Software control and compatible with NanoVNA-Saver for convenient measurement data transfer.Built-in 4500m-ah rechargeable battery,with type-C charging cable and LED charging indicator,it can be fully charged within 3 hours,no need to charge frequently.
- Multiple Measurement Functions : SeeSii NanoVNA-F V3 antenna analyzer is suitable for antenna testing of MF/HF/VHF/UHF/SHF bands. Supports a variety of display formats: Log Mag, Linear Mag, Phase, Smith R+jX, Smith R+L/C, VSWR, Polar, Group delay, Resistance, Reactance, etc. It can also be used to measure filters, amplifiers, attenuators, cables, power dividers, couplers, duplexers and other RF components. For the amateur radio operator or radio enthusiast, this latest vna antenna analyzer will be a very handy analyzer to have.
- What You Will Get: : Seesii upgraded value nanovna-f v3 kit includes 1 x NanoVNA-F V3,1 x Gold-Plated SMA Calibration Kit (LOAD, OPEN and SHORT),1 x SMA Female to SMA Female Connector,1 x SMA Male to SMA Male Connector,1 x SMA JKW Connector,2 x 20cm/7.9 RG405 Cables,1 x USB Type-C Data Cable. Seesii provides 7*24 hours technical service and 90-day money-back service, 3 years warranty lifetime customer support. You can use it with confidence.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
See On Amazon #16
AURSINC Upgraded NanoVNA-F V3 Vector Network Analyzer 4.3 1MHz 6GHz Antenna Analyzer Ham Radio Measuring S-Parameters Voltage Standing Wave Ratio SWR, Phase, Delay, Smith Chart Support RTC Real time
Asin: B0C8TH4ZBB | Model: NanoVNA-F V3 | PartNumber: NanoVNA-F V3
[Efficient And Worthwhile] The Nano Vna Antenna Analyzer Is Made Of Metal Material, Which Is Durable And Can Effectively Shield Electromagnetic Interference. Powerful Features, Including Automatic Calibration, Pc Software Control, Compatible With Nanovna-Saver To Facilitate Measurement Data Transfer, Storage And Export. Built-In 4500M-Ah Rechargeable Battery, With C-Type Charging Cable And Led Charging Indicator, Suitable For Indoor Or Outdoor Application.
[Authentic & Package] Nanovna-F V3 Developed By Hugen. Package Include Aursinc Nanovna-F V3 Host (With 4500Mah Battery) Display: 4.3 Inch Tft X1, Sma Open/Short/Load Calibration Kit ×1, Sma-Kk Adapter ×1, Sma-Jj Adapter ×1, Sma-Jkw Adapter ×1, 20Cm Sma-Jj Rg405 Coaxial Cable ×2, Usb Type-C Cable ×1. The Vna Antenna Analyzer Provide Reliable And Accurate Measurement Results For Ham Radio Operators And Professionals..
[Multiple Measurement Functions] Nanovna-F V3 Antenna Analyzer Is Suitable For Antenna Testing Of Mf/Hf/Vhf/Uhf/Shf Bands. It Can Also Be Used To Measure Filters, Amplifiers, Attenuators, Cables, Power Dividers, Couplers, Duplexers And Other Rf Components. Supports A Variety Of Display Formats: Log Mag, Linear Mag, Phase, Smith R+Jx, Smith R+L/C, Vswr, Polar, Group Delay, Resistance, Reactance, Etc. Nano Vna Antenna Analyzer Are Widely Used, With Fast Response Time And High Operating Efficiency.
[Ultra Wide Frequency] Compared With The Nanovna F V2 (50Khz-3Ghz), The Nanovna F V3 Antenna Analyzer Measurement Range Is Improved To 1Mhz-6Ghz. It Can Be Used For S11 And S21 Measurements. The S21 Dynamic Range Of Nanovna-F V3 Is 65 Db, While The S11 Dynamic Range Is 50 Db. The Scan Points Is Up To 101-801 And The Calibration Result Storage Is 12, Covering Up To The Full Low Or High Frequency Range. The Vna Antenna Analyzers Are Versatile And Offer Faster And More Efficient Operation.
Features
- [Upgraded Performance] nanovna f v3 with 4.3inch (800x480pixel) touchscreen display, 1MHz to 6GHz widely measuring range. With the optimally designed signal processing system, the scan speed is up to 200 points/s and the maximum scanning points is up to 801. The RF interface of antenna analyzer is SMA connector witch can be used to connect DUTs directly and the nanovna analyzer supports TDR function for cable lengths measurement
- [Ultra Wide Frequency] Compared with the nanovna f v2 (50kHz-3GHz), the nanovna f v3 antenna analyzer measurement range is improved to 1MHz-6GHz. It can be used for S11 and S21 measurements. The S21 dynamic range of NanoVNA-F V3 is 65 dB, while the S11 dynamic range is 50 dB. The scan points is up to 101-801 and the calibration result storage is 12, covering up to the full low or high frequency range. The vna antenna analyzers are versatile and offer faster and more efficient operation
- [Efficient and Worthwhile] The nano vna antenna analyzer is made of metal material, which is durable and can effectively shield electromagnetic interference. Powerful features, including automatic calibration, PC software control, compatible with NanoVNA-Saver to facilitate measurement data transfer, storage and export. Built-in 4500m-ah rechargeable battery, with C-type charging cable and LED charging indicator, suitable for indoor or outdoor application
- [Multiple Measurement Functions] NanoVNA-F V3 antenna analyzer is suitable for antenna testing of MF/HF/VHF/UHF/SHF bands. It can also be used to measure filters, amplifiers, attenuators, cables, power dividers, couplers, duplexers and other RF components. Supports a variety of display formats: Log Mag, Linear Mag, Phase, Smith R+jX, Smith R+L/C, VSWR, Polar, Group delay, Resistance, Reactance, etc. Nano vna antenna analyzer are widely used, with fast response time and high operating efficiency
- [Authentic & Package] NanoVNA-F V3 developed by Hugen. Package include AURSINC NanoVNA-F V3 host (with 4500mAh battery) display: 4.3 inch TFT x1, SMA OPEN/SHORT/LOAD calibration kit 1, SMA-KK adapter 1, SMA-JJ adapter 1, SMA-JKW adapter 1, 20cm SMA-JJ RG405 coaxial cable 2, USB type-C cable 1. The vna antenna analyzer provide reliable and accurate measurement results for ham radio operators and professionals.
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Weight: 1.39 pounds
See On Amazon #17
Taahira TinySA Ultra Spectrum Analyzer with 4.0" Touch Screen, Handheld 100kHz to 5.3GHz Frequency Analyzer with 32Gb Card, 2-in-1 Signal Generator 100kHz to 800MHz MF/HF/VHF UHF Input (2023 Upgraded)
Asin: B0CQYV89PC | Model: Ultra | PartNumber: Ultra | Ean: 0707713254460 | UPC: 707713254460
【Used As Signal Generator】 Transforms Into A Signal Generator When Not Being Used As A Spectrum Analyzer. Generates Sinus Output From Mf/Hf/Vhf Within 100Khz To 800Mhz, And Square Wave Output From Uhf Within 800Mhz To 4.4Ghz. Provides Mixing Signal Outputs For 4.4Ghz To 5.4Ghz. Comes With A Built-In Calibration Signal Generator To Facilitate Automatic Self-Tests And Low-Input Calibrations..
【Excellent Spectrum Analyzer】 Equipped With A 32Gb Micro Sd Card, Which Can Directly Record Data To The Card, Facilitating Your Data Sharing And Storage. Built-In 3000Mah Rechargeable Battery Can Be Used For Up To 8 Hours Without Frequent Charging, No Need To Worry About Power Shortage..
【Package List & Service Guarantee】 1X Tinysa Ultra Spectrum Analyzer; 2 X30cm Alsr100 Sma Cables;1 X Usb Type-C Data Cable;1 X Sma-Sma Barrel Connector ;1X Tlanyard And Touch Plectrum;1 X Antenna With Sma Connector.1 X32gb Microsd Card(Built Into The Device), 1 X Touchscreen Pen. Enjoy 24/7 Friendly And Professional Customer Support For Any Questions Or Issues..
【Pc Control】 Turn Into A Pc-Controlled Spectrum Analyzer When Connected Via Usb. Utilizing The Serial Over Usb (Cdc) Protocol, A Vast Selection Of Commands Can Be Accessed Through The Serial Interface, While Data Transfer Is Made Possible Via The Tinysa-App Connection. The Windows Driver Auto-Installs Upon Connecting To A Windows Pc, While The Linux Version Is Pre-Built Into The Kernel..
【Broader Frequency Range】 Upgrade From Tinysa To The Advanced Tinysa Ultra And Enjoy A Wider Frequency Range Of 100Khz To 5.3Ghz (0.1Mhz-6Ghz In Ultra Mode) With Switchable Resolution Band Pass Filters Between 200Hz To 850Khz. The 450-Point Color Display Covers The Low To High Frequency Range For Precise Measurements With Improved Speed And Accuracy..
Features
- 2023 Upgraded Version The latest hardware version V0.4.5.1. from Hugen! Our Tinysa ULTRA spectrum analyzer boasts a 4in touch screen with 480*320 pixels resolution, offering a larger measurement range from 100kHz to 5.3GHz. With a new ESD protection function, built-in 32Gb micro SD card and linear power supply, you can easily transfer and store data while avoiding any switching noise.
- Broader Frequency Range Upgrade from Tinysa to the advanced TinySA Ultra and enjoy a wider frequency range of 100kHz to 5.3GHz (0.1MHz-6GHz in Ultra mode) with switchable resolution band pass filters between 200Hz to 850kHz. The 450-point color display covers the low to high frequency range for precise measurements with improved speed and accuracy.
- Used As Signal Generator Transforms into a Signal Generator when not being used as a Spectrum Analyzer. Generates sinus output from MF/HF/VHF within 100kHz to 800MHz, and square wave output from UHF within 800MHz to 4.4GHz. Provides mixing signal outputs for 4.4GHz to 5.4GHz. Comes with a built-in calibration signal generator to facilitate automatic self-tests and low-input calibrations.
- PC Control Turn into a PC-controlled Spectrum Analyzer when connected via USB. Utilizing the Serial over USB (CDC) protocol, a vast selection of commands can be accessed through the serial interface, while data transfer is made possible via the tinySA-APP connection. The Windows driver auto-installs upon connecting to a Windows PC, while the Linux version is pre-built into the kernel.
- Excellent Spectrum Analyzer Equipped with a 32GB micro SD card, which can directly record data to the card, facilitating your data sharing and storage. Built-in 3000mAh rechargeable battery can be used for up to 8 hours without frequent charging, no need to worry about power shortage.
- Package List & Service Guarantee 1x Tinysa ULTRA Spectrum Analyzer; 2 x30cm ALSR100 SMA cables;1 x USB Type-C data cable;1 x SMA-SMA barrel connector ;1x TLanyard and touch plectrum;1 x Antenna with SMA connector.1 x32GB MicroSD card(Built into the device), 1 x Touchscreen pen. Enjoy 24/7 friendly and professional customer support for any questions or issues.
- See more on Amazon...
Brand: Taahira | Manufacturer: TinySa
Dimensions: 0.98 x 4.70 x 2.95 inches | Weight: 0.82 Pounds
See On Amazon #18
RF Explorer Digital Handheld Spectrum Analyzer 6G Combo Plus - Slim
Asin: B089QBXX6C | Model: 114992145 | PartNumber: 114992145 | Ean: 0886268668141 | UPC: 886268668141
[Advanced Features] – Included Advanced High-Resolution Spectrum Analyzer Mode, Wifi Analyzer Mode, Tracking Sna. Internal Firmware Is Continuously Updated With Additional Features And Functions To Improve The Device Capabilities..
[Tracking Mode Enabled] – When Combined With Rf Explorer Signal Generator The Analyzer Can Perform Full Tracking Sna To Define Gain, Attenuation And Swr For 1 And 2 Port Rf Devices Such As Filters, Amplifiers And Antennas..
[Free Computer Software] - When Connected To A Windows, Linux Or Mac Computer The Analyzer Can Display Advanced High Resolution Graphics, Including Power Meter And Spectrum Analyzer Real Time Charts, Historical Charts, Save Data To Csv Files And Export To Other Tools Such As Ww6 Or Matlab, Define Markers And Limit Lines And Much More. Free Open Source Api And Libraries Are Available To Customize Your Own Applications And Services..
[Robust Design And Instant Power Up] – A Fully Armored Metallic Enclosure Provides Robust Mechanical Strength And The High Quality Baked Varnished Paint Provides A Unique Glossy Finish. The Device Is Designed And Manufactured To Last Many Years Of Demanding Usage In The Field, With Internal Rechargeable Lithium Battery For Hours Of Continuous Usage..
Features
- [Impressive frequency range] Scan and diagnose any frequency starting in low frequency 50KHz up to high frequency 6.1GHz, with no gaps or limitations. Offering this wide operating range, it can detect all WiFi, cell stations and phones, IoT, HAM bands, Digital radio and TV, ISM bands, Drone links and pretty much all wireless technologies used in todays demanding communications world.
- [Robust design and instant power up] A fully armored metallic enclosure provides robust mechanical strength and the high quality baked varnished paint provides a unique glossy finish. The device is designed and manufactured to last many years of demanding usage in the field, with internal rechargeable Lithium battery for hours of continuous usage.
- [Advanced features] Included advanced high-resolution Spectrum Analyzer mode, WiFi Analyzer mode, Tracking SNA. Internal firmware is continuously updated with additional features and functions to improve the device capabilities.
- [Free Computer software] - When connected to a Windows, Linux or Mac computer the analyzer can display advanced high resolution graphics, including Power Meter and Spectrum Analyzer real time charts, historical charts, save data to CSV files and export to other tools such as WW6 or MatLab, define markers and limit lines and much more. Free open source API and libraries are available to customize your own applications and services.
- [Tracking mode enabled] When combined with RF Explorer Signal Generator the analyzer can perform full tracking SNA to define Gain, Attenuation and SWR for 1 and 2 port RF devices such as filters, amplifiers and antennas.
- See more on Amazon...
Brand: seeed studio | Manufacturer: seeed studio
Weight: 1.00 Pounds
See On Amazon #19
NanoVNA-H4 Vector Network Analyzer with 32GB Card, V4.3 10KHz -1.5GHz Upgraded HF VHF UHF Antenna Analyzer 4" Touch Screen, Voltage Standing Wave Ratio, Phase,Delay, Smith Chart
Asin: B0CJ2D4CZP
【Built-In Micro-Sd Port And Customisable Time】The Latest Design Of This Antenna Analyzer With Microsd Card Port Supports Up To 32Gb Memory Card (Included In Set), So You Can Save Your Field Test Data Or Screen To Microsd Card At Any Time, And The New Feature Of Customisable Date And Time Makes It Convenient For You To Further Record And Save Data..
【Pc Connection & Tx/Rx Function】The Nanovna-H4 Network Analyzer Comes With Pc Connectivity And A Built-In 1950Mah Battery. The Nanovnasave Pc Software Can Be Used To Connect To Nanovna, Extract Data For Display On The Pc And Save To A Touchstone File.The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. The Tx/Rx Method Can Measure The Complete S11/S21 Parameters (Need To Manually Replace The Transceiver Port Wiring)..
【Improved Frequency Algorithm】Vector Network Analyzer Uses The Direct Output Of The Si5351 To Provide Better Than 70Db Of Dynamics In The 50K-300Mhz Frequency Range, Better Than 60Db Of Dynamics In The Extended 300M-900Mhz Band, And Better Than 40Db Of Dynamics In The 900M-1.5Ghz Band. Si5351 The Old Harmonics Of The Si5351 Are Extended To Support Measurements Up To 1.5Ghz, Making It Ideal For Troubleshooting A Wide Range Of Antennas..
【Latest Upgrade】Nanovna-H4 Vector Network Analyzer Is The Latest Version 4.3 With 4.0 Inch Large Lcd Touch Screen, 10Khz-1.5Ghz Measurement Range, Easy To Use, Compact And Portable, Perfect For Field Work. The Antenna Analyzer Measuring Is Ideal For Evaluating Antenna Resonance And Swr, And Can Be Easily Operated By Electronic Engineers, Amateur Radio Operators Or Radio Diy Enthusiasts After Learning From The Video..
Features
- NanoVNA-H4 Vector Network Analyzer Equipped with 1X NanoVNA-H4 analyzer (with 1950mAh battery), 1X USB Type-C cable, 1X Type-C to Type-C cable, 2 x 15cm SMA male to male RG316 RF cable, 1x SMA male calibration kit - OPEN,1x SMA male calibration kit - SHORT ,1 x SMA male calibration kit - LOAD, 1 x Touchscreen pen, (Added 1 x 32GB memory card)
- Latest Upgrade NanoVNA-H4 Vector Network Analyzer is the latest version 4.3 with 4.0 inch large LCD touch screen, 10KHz-1.5GHz measurement range, easy to use, compact and portable, perfect for field work. The Antenna Analyzer Measuring is ideal for evaluating antenna resonance and SWR, and can be easily operated by electronic engineers, amateur radio operators or radio DIY enthusiasts after learning from the video.
- Built-in MICRO-SD port and customisable time The latest design of this antenna analyzer with MicroSD card port supports up to 32GB memory card (included in set), so you can save your field test data or screen to MicroSD card at any time, and the new feature of customisable date and time makes it convenient for you to further record and save data.
- Improved frequency algorithm Vector Network Analyzer uses the direct output of the Si5351 to provide better than 70dB of dynamics in the 50K-300MHz frequency range, better than 60dB of dynamics in the extended 300M-900MHz band, and better than 40dB of dynamics in the 900M-1.5GHz band. si5351 The old harmonics of the si5351 are extended to support measurements up to 1.5GHz, making it ideal for troubleshooting a wide range of antennas.
- PC connection & TX/RX function The NanoVNA-H4 Network Analyzer comes with PC connectivity and a built-in 1950mAh battery. The NanoVNASave PC software can be used to connect to NanoVNA, extract data for display on the PC and save to a Touchstone file.The TX/RX method can measure the complete S11 and S21 parameters. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring).
- See more on Amazon...
Brand: TOSTOG | Manufacturer: TOSTOG
See On Amazon #20
Nanovna 10KHz-1.5Ghz Vector Network Analyzer Kit,SEESII MF HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 2.8" Touch Screen
Asin: B07Y53RCKW | Model: NanoVNA | PartNumber: NanoVNA | Ean: 0889251491146 | UPC: 889251491146
The Extended 300M-600Mhz Band Provides Better Than 60Db Of Dynamics, And The 600M-900M Band Is Better Than 50Db Of Dynamics..
This Is A Diy Product That Provides Perfect Vector Network Measurement Capabilities In The Size Of A Credit Card. It Includes A 2.8-Inch Touch Screen And 500Mah Battery, Which Can Be Used Offline For 2 Hours. For Longer Measurement, Please Connect External Power Supply Or Contact Me To Make A Larger Battery Version. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring..
Requirements Accomplished By Leveraging Spectra Premium's Oe Engine Management Systems Design Expertise.Platinum Connector Threads Reduce The Number Of Connection Points For Faster Reaction To Change.Ceramic-Built Printed Circuit Boards Are Protected By Silica Gel, Providing Superior Resistance To Temperature Changes And Vehicle Vibrations..
The Improved Frequency Algorithm Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50Khz-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics.
Features
- Unit is designed to fit for Original Equipment, form and function Simple and practical PC control software, you can export Touchstone (snp) files for various radio design and simulation software through PC software.
- The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50KHz-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
- The extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics.
- Requirements accomplished by leveraging Spectra Premium's OE engine management systems design expertise.Platinum connector threads reduce the number of connection points for faster reaction to change.Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations.
- This is a DIY product that provides perfect vector network measurement capabilities in the size of a credit card. It includes a 2.8-inch touch screen and 500mAh battery, which can be used offline for 2 hours. For longer measurement, please connect external power supply or contact me to make a larger battery version. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Dimensions: 0.43 x 3.37 x 2.13 inches
See On Amazon #21
NanoVna SAA-2N VNA Antenna Analyzer,SEESII 50KHz -3GHz Vector Network Analyzer with Bag & Testboard Kit,4" inch LCD,HF VHF UHF Measuring S Parameters, Voltage Standing Wave Ratio Smith Chart
Asin: B08H4NFZZ2 | Ean: 6933834700584
【Improved Frequency Range】:Transmission Mearsure S21: 70Db(50Khz-1.5Ghz), 60Db(1.5Ghz-3Ghz). Reflection Measure S11: -50Db(50Khz-1.5Ghz), -40Db(1.5Ghz-3Ghz); Antenna Analyzer: 1.005(50Khz - 1.5Ghz), 1.02(1.5Ghz-3Ghz).
【What You Can Get】1X Nanovna Saa-2N Vna, 1X Micro Usb Data Cable,2X 500Mm N-Type Male To Male Rg142-Pur Rf Cable,1X N-Type Male Calibration Kit-Open,1X N-Type Male Calibration Kit-Short,1X N-Type Male Calibration Kit-Load,1X N-Type Female To Female Connector,1X Eva Storage Bag, 1X Touching Screen Pen And Lanyard,1X Testboard ,1X Accessories Kit, 2X 12 Hours Services.
【 Improved Performance】High Stability, High Sensitivity, High Precision, Improved Performance.Made Of High-Quality Aluminum Protective Case, Strong Practicability And Long Service Life.Bulit-In 3000Mah Rechargeable Battery,Usb Powered.
【Calibration 】The Saa-2N/Nanovna_V2.2 Does Not Load The Initial Calibration Data At Startup, And Does Not Automatically Interpolate The Calibration Data After The User Changes The Frequency, And Must Recalibrate Or Recall The Calibration Data (Previously Saved Data) After Each Startup And Frequency Change. Please Read The User Manual Carefully Before Use To Avoid Damaging The Device..
Features
- Upgraded NanoVNA SAA-2N V2.2 Version Not only testing standing wave impedance of the antenna, can also debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier.4.0 inch touch screen make it easier for you to read data and test
- Calibration The SAA-2N/NanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or recall the calibration data (previously saved data) after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device.
- Improved Frequency Range :transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: -50dB(50KHz-1.5GHz), -40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
- Improved Performance High stability, high sensitivity, high precision, improved performance.Made of high-quality aluminum protective case, strong practicability and long service life.Bulit-in 3000mAh rechargeable battery,USB powered
- What You Can Get 1x NanoVNA SAA-2N VNA, 1x Micro USB Data Cable,2x 500mm N-type Male to Male RG142-PUR RF Cable,1x N-type Male Calibration Kit-OPEN,1x N-type Male Calibration Kit-SHORT,1x N-type Male Calibration Kit-LOAD,1x N-type Female to Female Connector,1x EVA Storage Bag, 1x Touching Screen Pen and Lanyard,1x Testboard ,1x Accessories Kit, 2x 12 hours services
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
See On Amazon #22
PFCTART Upgraded 4.0 Inch TinySA Ultra Spectrum Analyzer, 100kHz-5.3GHz Handheld Frequency Analyzer with 32GB SD Card, 2 in1 Signal Generator 100kHz to 800MHz MF/HF/VHF UHF Input
Asin: B0CG1FQSGV | Ean: 0736152142397 | UPC: 736152142397
✅【2 In 1 Device】When Not Used As Spectrum Analyzer It Can Be Used As Signal Generator, Mf/Hf/Vhf Sinus Output Between 100Khz-800Mhz, Uhf Square Wave Output Between 800Mhz-4.4Ghz, Mixing Signal Output Is Between 4.4Ghz-5.4Ghz; Built-In Calibration Signal Generator That Is Used For Automatic Self Test And Low Input Calibration..
✅【200Hz-850Khz Rbw】The Rbw Is As Low As 200Hz, Effectively Distinguishing Adjacent Signals And Meeting The Requirements Of Ssb Dual Tone Intermodulation Testing. The Maximum Width Of The Rbw Is 850 Khz, Achieving Fast Scanning.
✅【Package List】1X Tinysa Ultra Spectrum Analyzer, 2 X30cm Alsr100 Sma Cables,1 X Usb Type-C Data Cable,1 X Sma-Sma Barrel Connector,1X Tlanyard And Touch Plectrum,1 X Antenna With Sma Connector,1 X32gb Microsd Card(Plugged In The Host).
✅【Built In Lna And Attenuator】With Phase Noise As Low As -92Dbc@10Khz，Danl As Low As -166Dbm/Hz..
✅【Pc Control】Connected To A Pc Via Usb It Becomes A Pc Controlled Spectrum Analyzer.The Usb Interface Implements The Serial Over Usb (Cdc) Protocol And There Is A Large Set Of Commands That Can Be Invoked Over The Serial Interface. You Can Also Transfer Data To Your Computer Through Tinysa-App Connection. The Driver For Windows Will Install Automatically After Connecting To A Windows Pc. The Driver For Linux Is Built Into The Kernel..
✅【Ultra-Wide Frequency Range】The Upgraded Tinysa Ultra Has 100Khz To 5.3Ghz Ultra-Wide Measuring Frequency Range, Spectrum Analyzer For 0.1-800Mhz, With Ultra Mode Up To 0.1Mhz-6Ghz. It Has 200Hz-850Khz Rbw, Adjacent Signals Effectively Distinguished When Rbw Reach 200Hz, Meet Ssb Two-Tone Test Requirements, Maximum Width 850Khz, Rbw Implements Fast Scanning..
Features
- New TinySA Ultra Mode Tinysa ULTRA owns high performance frequency in 100khz to 800MHz, and when in ultra mode, the analyzer can reach 5.3GHz. It also has a new ESD protection function, With new 4'' touchscreen display and installed with the latest hardware system V0.4.5.1, professional and stable.
- Ultra-Wide Frequency Range the upgraded tinysa ULTRA has 100kHz to 5.3GHz ultra-wide measuring frequency range, spectrum analyzer for 0.1-800MHz, with Ultra mode up to 0.1MHz-6GHz. It has 200Hz-850kHz RBW, adjacent signals effectively distinguished when RBW reach 200Hz, meet SSB two-tone test requirements, maximum width 850kHz, RBW implements fast scanning.
- 2 in 1 Device When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 100kHZ-800MHz, UHF square wave output between 800mHz-4.4GHz, Mixing signal output is between 4.4GHz-5.4GHz; Built-in calibration signal generator that is used for automatic self test and low input calibration.
- PC Control Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. you can also transfer data to your computer through tinySA-APP connection. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.
- Package List 1x Tinysa ULTRA Spectrum Analyzer, 2 x30cm ALSR100 SMA cables,1 x USB Type-C data cable,1 x SMA-SMA barrel connector,1x TLanyard and touch plectrum,1 x Antenna with SMA connector,1 x32GB MicroSD card(plugged in the host)
- Built In LNA And Attenuator with phase noise as low as -92dBc@10kHz DANL as low as -166dBm/Hz.
- 200Hz-850KHz RBW The RBW is as low as 200Hz, effectively distinguishing adjacent signals and meeting the requirements of SSB dual tone intermodulation testing. The maximum width of the RBW is 850 KHZ, achieving fast scanning
- See more on Amazon...
Brand: PFCTART | Manufacturer: PFCTART
See On Amazon #23
NanoVNA-F V2 Vector Netwerk Analyzer 3Ghz,4.3 inch TFT Screen NanoVNA Antenna Analyzer Metal Shell with 5000mAh,NanoVNA V2 HF VHF UHF VNA Measuring S-Parameter Voltage SWR Phase Delay Smith Chart
Asin: B08QVC9JVK | Model: NanoVNA-F V2 | PartNumber: NanoVNA-F V2 | Ean: 5057803526317
【5000Mah Battery And Longer Standby Time】The Antenna Analyzer's 5000Mah Large-Capacity Battery Has Longer Standby Time, Up To 7 Hours. When Not Used As A Measuring Instrument, It Can Be Used As A Power Pack To Charge Your Mobile Phone..
【Package Includes】Nanovna-F V2 Host X1 ; 200Mm Sma-Jj Rg405 Rf Cable X2; Sma Calibration Kit-Open/Short/50Ω Load X1; Sma-Kk Double-Head Female Hole Adapter X1; Sma-Jj Double-Head Male Pin Adapter X1; Sma-Jkw Elbow Outer Screw Inner Hole To Inner Screw Inner Needles Adapter X1; Usb Type-C Cable X1; Touch Pad X1..
【Aluminum Alloy Case Design】The Vector Network Analyzer Uses Metal Shield Design To Reduce The External Interference And Improve The Measurement Accuracy. The Strong Aluminum Alloy Makes It More Durable..
【Improved Frequency Range】The 3G Nanovna-F Has A Measurement Range Of 50K-3Ghz, Which Is Larger Than The Old Version. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters，S21 Dynamic Ranges: 70Db (1.5Ghz), 60Db (3Ghz); S11 Dynamic Ranges: 50Db (1.5Ghz), 40Db (3Ghz)..
Features
- 4.3inch Large Screen Our NanoVNA-F V2 with 4.3-inch IPS TFT LCD screen with 800 * 480 resolution, can measure S-parameter, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on. The NanoVNA V2 3ghz is equipped with touch screen paddle for easy use.
- Improved Frequency Range The 3g NanoVNA-F has a measurement range of 50k-3ghz, which is larger than the old version. The TX/RX method can measure the complete S11 and S21 parameters S21 dynamic ranges: 70dB (1.5GHz), 60dB (3GHz); S11 dynamic ranges: 50dB (1.5GHz), 40dB (3GHz).
- 5000mAh Battery and Longer Standby Time The antenna analyzer's 5000mAh large-capacity battery has longer standby time, up to 7 hours. When not used as a measuring instrument, it can be used as a power pack to charge your mobile phone.
- Aluminum Alloy Case Design The vector network analyzer uses metal shield design to reduce the external interference and improve the measurement accuracy. The strong aluminum alloy makes it more durable.
- Package Includes NanoVNA-F V2 Host x1 ; 200mm SMA-JJ RG405 RF Cable x2; SMA calibration kit-Open/Short/50 Load x1; SMA-KK Double-Head Female Hole Adapter x1; SMA-JJ Double-Head Male Pin Adapter x1; SMA-JKW Elbow Outer Screw Inner Hole To Inner Screw Inner Needles Adapter x1; USB Type-C Cable x1; Touch Pad x1.
- See more on Amazon...
Brand: SDRGEEK | Manufacturer: SDRGEEK
Weight: 0.99 pounds
Warranty: 1 year
See On Amazon #24
RF Explorer PRO Spectrum Analyzer, Signal Tracking Generator, and Power Meter, Multiporpuse Device for Multimedia, Wireless Audio, Network, WiFi and Telecommunications RF Analysis (15MHz to 3.3GHz)
Asin: B0D33Q4SN4 | Model: 15MHz to 3.3GHz | PartNumber: 15MHz to 3.3GHz | Ean: 0614524897314 | UPC: 614524897314
[ Advanced Operation ] Includes Zero Span, Waterfall 2D And 3D, Wideband Power Channel, Data Recording And Replay, Data Export To Cover Wide Range Of Scenarios. The Includes Zero Span, Waterfall 2D And 3D, Wideband Power Channel, Data Recording And Replay, Data Export To Cover Wide Range Of Scena.
[ Comprehensive Support & Peace Of Mind ] Your Purchase Includes Both Technical Support And A 1-Year Warranty. We're Here For You Via Phone And Email Through Amazon Messages, And You'll Find A User Manual For Added Convenience. This Guarantees A Secure Investment And Makes It A Meaningful Gift For Any Special Occasion Like Holidays, Birthdays, Anniversaries, Mother's Day, Or Father's Day.
[ Wideband Design With Rapid Detection ] Resolves 8Ghz Band Events In 100Us, Ensuring Accurate And Fast Detection Across A Broad Frequency Range.
[ High-Resolution Interface & Advanced Functionalities ] An Intuitive Touch Screen To Support Any Wireless Microphone Or In-Ear Monitor System. Plus, The Internal Gps That Ensures Accurate Rf Heatmap Tracking, While The Built-In Cpu Enables Fast Frequency Coordination Calculations, Real-Time Interference Checking, And Intermodulation Analysis.
Features
- [ Powerful Multipurpose RF Spectrum Analyzer ] The RF Explorer Pro combines the functionality of a Spectrum Analyzer, Signal Tracking Generator, and Power Meter, all in one user-friendly device. Whether you're a professional technician or an enthusiast, the RF Explorer Pro empowers you to perform precise all RF analysis and optimization
- [ High-Resolution Interface & Advanced Functionalities ] An intuitive touch screen to support any wireless microphone or in-ear monitor system. Plus, the internal GPS that ensures accurate RF heatmap tracking, while the built-in CPU enables fast Frequency Coordination calculations, real-time interference checking, and intermodulation analysis
- [ Advanced Operation ] Includes Zero Span, Waterfall 2D and 3D, wideband Power Channel, Data recording and replay, data export to cover wide range of scenarios. The Includes Zero Span, Waterfall 2D and 3D, wideband Power Channel, Data recording and replay, data export to cover wide range of scena
- [ Wideband Design with Rapid Detection ] Resolves 8GHz band events in 100uS, ensuring accurate and fast detection across a broad frequency range
- [ Comprehensive Support & Peace of Mind ] Your purchase includes both technical support and a 1-year warranty. We're here for you via phone and email through Amazon Messages, and you'll find a user manual for added convenience. This guarantees a secure investment and makes it a meaningful gift for any special occasion like holidays, birthdays, anniversaries, Mother's Day, or Father's Day
- See more on Amazon...
Brand: LATNEX | Manufacturer: LATNEX
See On Amazon #25
Spectrum Analyzer SA6 Signal Generator Portable 3.2in Color Touchscreen 6GHz for Wi Fi 2G 4G LTE CDMA 35MHz 6200Mhz
Asin: B0D324MZR4 | Model: WALFRONT1pindk4obh | PartNumber: WALFRONT1pindk4obh
[Wide Frequency Range] : Uncover A Wide Spectrum Display Range From 35Mhz To 6200Mhz, Ideal For Analyzing Rf Environments, Checking Operation Efficiency, And Measuring Swr With Precision..
[Versatile Analyzer] : Dive Into The World Of Signal Analysis With This Analyzer That Covers A Range Of Commonly Used Technologies Such As Wi-Fi, 4G Lte, Cdma, And More. Explore Amplitude And Frequency Components Effortlessly..
[Tracking Generator Feature] : Enhance Your Measurements With The Tracking Generator Function, Enabling Detailed Analysis Of Passive And Active Devices Like Filters And Amplifiers. The Included Software Allows For Swr And Return Loss Measurements With Accuracy..
[2 In 1 Device] : Experience The Versatility Of The Sa6 Spectrum Analyzer With A Built-In Signal Generator, Offering Dual Functionality In One Compact Device. Easily Switch Between Modes For Seamless Usage..
Features
- [3.2 Inch Touchscreen] : Engage with real-time test data on the responsive 3.2-inch color touchscreen, offering a clear view of results. the stylus enhances precision, providing a seamless user experience. connect to your pc for extended data analysis and control.
- [2 in 1 Device] : Experience the versatility of the sa6 spectrum analyzer with a built-in signal generator, offering dual functionality in one compact device. easily switch between modes for seamless usage.
- [Wide Frequency Range] : Uncover a wide spectrum display range from 35mhz to 6200mhz, ideal for analyzing rf environments, checking operation efficiency, and measuring swr with precision.
- [Tracking Generator Feature] : Enhance your measurements with the tracking generator function, enabling detailed analysis of passive and active devices like filters and amplifiers. the included software allows for swr and return loss measurements with accuracy.
- [Versatile Analyzer] : Dive into the world of signal analysis with this analyzer that covers a range of commonly used technologies such as wi-fi, 4g lte, cdma, and more. explore amplitude and frequency components effortlessly.
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon #26
SA6 6G Portable Spectrum Analyzer, 3.2 Inch WiFi 35 to 6200Mhz Handheld Tiny Frequency Analyzer, Wireless Signal Tester, Signal Generator, Antenna Analyzer for On Site Operation
Asin: B0D31QZQCK | Model: Generic9ecst08ba5 | PartNumber: Generic9ecst08ba5
Additional Function: Making It Possible To Measure The Frequency Response Of Passive Or Active Devices (Such As Filters Or Amplifiers). This Software Allows For Measuring Swr And Return Loss Modules. This Requires An External Directional Coupler And A Set Of Calibration Measures..
Perform Following Operations: Place An External Antenna On The Base Station, Quickly Analyze The Rf Environment, Check The Correct Operation Of The Relay Cell, And Repair And Adjust Relays, Generators, Filters, Etc. Measure Swr When Using An External Directional Coupler(Without)..
Mainly Used For On Site Operation: The Equipment Is Sturdy And Durable, Lightweight, And Low In Energy Consumption. Enables The Service Center And Maintenance Shop To Perform On Site Analysis For Debugging And Repair Work. In Addition, The Spectrum Analyzer Is A Solution For Maintenance Workshops And Radio Enthusiasts..
Multifunctional: The Spectrum Analyzer Can Process Signals From All Widely Used Technologies, Such As Wi Fi, 2G, 36, 4G, Lte, Cdma, Dcs, Gsm, Gprs, Glonass, Etc..
Features
- MAIN FUNCTION: SA6 is a simple portable spectrum analyzer and signal source designed to display the signal spectrum within the frequency range of 35 to 6200MHz. The analyzer identifies the amplitude and frequency of the components of the analyzed process.
- MULTIFUNCTIONAL: The spectrum analyzer can process signals from all widely used technologies, such as Wi Fi, 2G, 36, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, etc.
- ADDITIONAL FUNCTION: Making it possible to measure the frequency response of passive or active devices (such as filters or amplifiers). This software allows for measuring SWR and return loss modules. This requires an external directional coupler and a set of calibration measures.
- MAINLY USED FOR ON SITE OPERATION: The equipment is sturdy and durable, lightweight, and low in energy consumption. Enables the service center and maintenance shop to perform on site analysis for debugging and repair work. In addition, the spectrum analyzer is a solution for maintenance workshops and radio enthusiasts.
- PERFORM FOLLOWING OPERATIONS: Place an external antenna on the base station, quickly analyze the RF environment, check the correct operation of the relay cell, and repair and adjust relays, generators, filters, etc. Measure SWR when using an external directional coupler(without).
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #27
Spectrum Analyzer 6G 3.2 Inch Touch Screen Handheld 35MHz to 6200MHz Range Signal Generator Analyzer Portable PC Controllable
Asin: B0D31Y4PTX | Model: RiToEasysports149nbo7sge | PartNumber: RiToEasysports149nbo7sge
【3.2 Inch Touch Screen】: This Portable Spectrum Analyzer Has A 3.2 Inch Touch Screen, Which Allows You To View Test Data In Real Time. It's Responsive And Comes With A Stylus..
【35Mhz To 6200Mhz Range】: This Network Analyzer Displays The Range From 35Mhz To 6200Mhz. Placing External Antennas At Base Stations Allows You To Quickly Analyze The Rf Environment, Verify Proper Operation, Maintenance, And Adjustment Of Repeaters, Signal Generators, Filters, Etc., And Measure Swr Using External Directional Couplers. Masu..
【Pc Controllable】: This Spectrum Analyzer Can Be Connected To A Pc Via Usb And Data Can Be Transferred To The Pc. Pc Software Control Facilitates Data Analysis And Further Adjustments..
【Multi-Function】: This Antenna Analyzer Is Multi-Functional, Identifying The Amplitude And Frequency Components Of The Analysis Process. It Can Handle Signals From All Commonly Used Technologies, Including Wi Fi, 2G, 3G, 4G, Lte, Cdma, Dcs, Gsm, Gprs, Glonass, And More..
Features
- 2 in 1 Design : This portable spectrum analyzer signal generator is a 2 in 1 design with a built-in signal generator. When not used as a spectrum analyzer, it can be used as a signal generator.
- Multi-function : This antenna analyzer is multi-functional, identifying the amplitude and frequency components of the analysis process. It can handle signals from all commonly used technologies, including Wi Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, and more.
- 3.2 inch touch screen : This portable spectrum analyzer has a 3.2 inch touch screen, which allows you to view test data in real time. It's responsive and comes with a stylus.
- PC Controllable : This spectrum analyzer can be connected to a PC via USB and data can be transferred to the PC. PC software control facilitates data analysis and further adjustments.
- 35MHz to 6200MHz Range : This network analyzer displays the range from 35MHz to 6200MHz. Placing external antennas at base stations allows you to quickly analyze the RF environment, verify proper operation, maintenance, and adjustment of repeaters, signal generators, filters, etc., and measure SWR using external directional couplers. Masu.
- See more on Amazon...
Brand: RiToEasysports | Manufacturer: RiToEasysports
See On Amazon #28
Lerpwige 4 Inch Display Screen TinyPFA Portable Phase Frequency Analyzers 1MHz-290MHz for Measurement of Deviation TinyPFA
Asin: B0D31FYQC6 | Ean: 7629462519559
Tinypfa Is Not A Frequency Meter And Its Internal Reference Is Inaccurate And Unstable. It Is Only Used For Measuring The Deviation Of Two Signals With Similar Frequencies. It Can Be Used To Compare A With A Very Accurate Reference.
Tinypfa Is A Portable Powered Device That Uses A Usb Interfaces For Charging And Designed With A 4-Inch Display Screen, Making It Very Convenient To Carry And Operate..
A Typical Use Is To Measure The Differences Between Two 10 Mhz Clocks. Tinypfa Can Display Phase And Frequency Differences Digitally, And Display The Relationship Between Measurement Results And Time In A Graphs..
Please Note That The Maximums Frequency Difference That Can Be Displayed Depends On The Measurement Time , Which Is Approximately 200Hz/S. Therefore, Fortau Of 1S, The Maximums Frequency Difference Is 200Hz..
Features
- TinyPFA is a phase frequency Analyzers that can accurately measure the frequency and phase difference between signals apply to two input terminals. The input frequency can be any frequency between 1 MHz and 290 MHz.
- Please note that the maximums frequency difference that can be displayed depends on the measurement time , which is approximately 200Hz/s. Therefore, forTau of 1s, the maximums frequency difference is 200Hz.
- TinyPFA is not a frequency meter and its internal reference is inaccurate and unstable. It is only used for measuring the Deviation of two signals with similar frequencies. It can be used to compare a with a very accurate reference
- A typical use is to measure the differences between two 10 MHz clocks. TinyPFA can display phase and frequency differences digitally, and display the relationship between measurement results and time in a graphs.
- TinyPFA is a portable powered device that uses a USB interfaces for charging and designed with a 4-inch display screen, making it very convenient to carry and operate.
- See more on Amazon...
Brand: Lerpwige | Manufacturer: MEIYIN
See On Amazon #29
2023 AURSINC TinySA Ultra Spectrum Analyzer 4inch - V0.4.5.1 100kHz-5.3GHz Handheld Frequency Analyzer, 2in1 Signal Generator 100kHz to 800MHz MF/HF/VHF UHF Input with 32Gb Card (with 25W Attenuator)
Asin: B0BXWW7JQF | Model: ULTRA TinySA 20230309 | PartNumber: ULTRA TinySA 20230309
[Pc Operation] Connected To A Pc Via Usb. The Usb Interface Implements Cdc Protocol And There Is A Large Set Of Commands That Can Be Invoked Over The Serial Interface. These Command Can Be Used To Perform Meas Or Update Internal Settings. Tinysa-App Transfers Data Directly To The Computer. The Driver For Windows Will Install Automatically After Connecting To A Windows Pc. The Driver For Linux Is Built Into The Kernel.
[Rf Attenuator Specification] Rf Attenuator Dc-3Ghz 25W Coaxial Fixed Attenuator 10Db With N-Male To N-Female Connector. Vswr: ≤ 1.20. Impedance:50 Ohm. Accuracy(Db): ±1.0.
[Features] The Rbw Is As Low As 200Hz, Which Can Effectively Distinguish Adjacent Signals And Meet The Requirements Of Ssb Dual-Satellite Inter-Modulation Test. Input Step Attenuator From 0Db To 31Db (Can Not Be Used Not In Combination With Lna). And, With The New Esd Protection Function, The Product Has A Higher Anti-Static Level And A Longer Service Life.
[What You Get] 1X Tinysa Ultra Spectrum Analyzer(4Inch Touchscreen, 3000Mah Rechargeable Battery); 1X 25W Attenuator; 2X 30Cm Alsr100 Sma Cables; 1 X Usb Type-C Data Cable; 1X Sma-Sma Barrel Connector; 1X Tlanyard And Touch Plectrum; 1X Antenna With Sma Connector; 1X 32Gb Microsd Card(Plugged In The Host), 1X Stylus Pen.
[2 In 1 Device] When Not Used As Spectrum Analyzer It Can Be Used As Signal Generator, Mf/Hf/Vhf Sinus Output Between 100Khz-800Mhz, Uhf Square Wave Output Between 800Mhz-4.4Ghz, Mixing Signal Output Is Between 4.4Ghz-5.4Ghz. Built-In Calibration Signal Generator That Is Used For Automatic Self Test And Low Inputcalibration. The Tinysa Ultra Contains All The Components Of A Conventional Heterodyne Swept Spectrum Analyzer.
[Frequency Range] Tiny Sa Ultra Measures From 100Khz-5.3Ghz: Spectrum Analyzer For 0.1Mhz-800Mhz, With Ultra Mode Enabled, Level Calibrated Up To 6Ghz, Can Observe Signals Up To 12Ghz. Switchable Resolution Bandpass Filters From 200Hz-850Khz. You Can Fast And Accurate Execute Measurement Tests.
Features
- [Upgraded TinySA Ultra] Tinysa Ultra developed by Hugen, HW V0.4.5.1. With 4inch touch screen(480*320 pixels resolution), tinysa ultra spectrum analyzer has ultra measurement range from 100kHz to 5.3GHz, built-in 32Gb micro SD card for data transfer and storage. Linear power supply to avoid switching noise
- [Frequency Range] Tiny sa ultra measures from 100KHz-5.3GHz: Spectrum Analyzer for 0.1MHz-800MHz, with Ultra mode enabled, level calibrated up to 6GHz, can observe signals up to 12GHz. Switchable resolution bandpass filters from 200Hz-850kHz. You can fast and accurate execute measurement tests
- [PC Operation] Connected to a PC via USB. The USB interface implements CDC protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform MEAS or update internal settings. Tinysa-APP transfers data directly to the computer. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel
- [2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 100kHZ-800MHz, UHF square wave output between 800mHz-4.4GHz, Mixing signal output is between 4.4GHz-5.4GHz. Built-in calibration signal generator that is used for automatic self test and low inputcalibration. The TinySA ULTRA contains all the components of a conventional heterodyne swept spectrum analyzer
- [Features] The RBW is as low as 200Hz, which can effectively distinguish adjacent signals and meet the requirements of SSB dual-satellite inter-modulation test. Input Step attenuator from 0dB to 31dB (can not be used not in combination with LNA). And, with the new ESD protection function, the product has a higher anti-static level and a longer service life
- [What You Get] 1x Tinysa ULTRA Spectrum Analyzer(4inch touchscreen, 3000mah rechargeable battery); 1x 25W Attenuator; 2x 30cm ALSR100 SMA cables; 1 x USB Type-C data cable; 1x SMA-SMA barrel connector; 1x TLanyard and touch plectrum; 1x Antenna with SMA connector; 1x 32GB MicroSD card(plugged in the host), 1x Stylus Pen
- [RF Attenuator Specification] RF Attenuator DC-3GHz 25W Coaxial Fixed Attenuator 10dB with N-male to N-female connector. VSWR: 1.20. Impedance:50 Ohm. Accuracy(dB): 1.0
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Weight: 1.98 pounds
See On Amazon #30
2023 Upgraded Mini 1300 Antenna Analyzer,SeeSii 4.3 Inch 0.1-1300MHz HF VHF UHF Antenna Analyzer with SMA Calibration Kits,Multi Measurement ANT/SWR/TDR/DSP RF Signal Generator Vector Network Analyzer
Asin: B0C6JWF43R | Model: LI58CP5B0070FBA | PartNumber: LI58CP5B0070FBA
🔋【Ultra-Long Service Life】: The Upgraded Spectrum Analyzer Is Designed With New Aluminium Alloy Shell For Durability And Good Heat Dissipation For Longer Machine Life. Built-In 3200M-Ah Rechargeable Battery,With Micro-Usb Charging Port And Led Charging Indicator,It Can Be Fully Charged Within 3 Hours,No Need To Charge Frequently..
👆【Multi-Function】: This Handheld Antenna Analyzer Will Be A Nice Little Addition To The Workbench For Radio Operator Or Enthusiast .It Support Single Frequency,Frequency Sweep,Multi Swr ,Tune Swr, S21 Gain, Find Frequency ,Quartz Data,Tdr Mode, L/C Meter,Dsp Measure,Rf Signal Generator, Etc Multi Functions..
🎁【What You Will Get:】: 1 X Mini1300 Antenna Analyzer,1 X Usb Charging Cable, 1 X Short Kit,1 X Open Kit, 1 X Load Kit,1 X Sma Connector, 1 X Uhf N-Type Connector,1 X Manual.It's Very Useful As An Antenna Analyzer For Your Ham Station, Easy To Use..
✨【External Storage Function】: The Frequency Analyzer Is Designed With A Sd Card Port, Support Tf Memory Card Storage, You Can Directly Record Data To The Sd Card And View Photos Kept In Sd Memory, Which Is Convenient For Your Data Sharing And Storage..
👉【Improved Performance】 :The 4.3 Inch Vector Network Analyzer Can Measure Swr, R, +Jx, -Jx, |Z|,Return Loss Multi Parameters, Swr Measurement Range: 1.0-1999 (Single Point Mode), 1.0-20.0 (Sweep Mode).There Are 3 Measurement Modes: Single Point Measurement, Scanning (Frequency Sweep), And Tdr Mode.And It Support Numerical Display, Curve Display, Smith Chart Display Modes.For The Amateur Radio Operator Or Radio Enthusiast, This Antenna Analyzer Will Be A Very Handy Analyzer To Have..
Features
- 2023 Upgraded Antenna Analyzer : The Mini1300 Antenna Analyzer features a larger resistive 4.3 inch touchscreen and widened frequency scan range MF/HF/VHF input for 0.1-1300MHz, can measure multi parameters. With SMA Open Short Load Calibration Kits , easy to Calibrate directly.
- Improved Performance :The 4.3 inch Vector Network Analyzer can measure SWR, R, +Jx, -Jx, |Z|,Return loss multi parameters, SWR measurement range: 1.0-1999 (single point mode), 1.0-20.0 (sweep mode).There are 3 measurement modes: Single point measurement, Scanning (Frequency Sweep), and TDR Mode.And it support Numerical display, curve display, Smith chart display Modes.For the amateur radio operator or radio enthusiast, this antenna analyzer will be a very handy analyzer to have.
- Ultra-long Service Life : The upgraded spectrum analyzer is designed with new aluminium alloy shell for durability and good heat dissipation for longer machine life. Built-in 3200m-ah rechargeable battery,with Micro-USB charging port and LED charging indicator,it can be fully charged within 3 hours,no need to charge frequently.
- External Storage Function : The frequency analyzer is designed with a SD Card Port, support TF memory card storage, you can directly record data to the SD card and view photos kept in SD memory, which is convenient for your data sharing and storage.
- Multi-Function : This handheld antenna analyzer will be a nice little addition to the workbench for Radio Operator or Enthusiast .It support single frequency,frequency sweep,multi SWR ,tune SWR, S21 gain, find frequency ,quartz data,TDR mode, L/C meter,DSP measure,RF signal generator, etc multi functions.
- What You Will Get: : 1 x Mini1300 Antenna Analyzer,1 x USB Charging Cable, 1 x Short kit,1 x Open Kit, 1 x Load Kit,1 x SMA Connector, 1 x UHF N-Type Connector,1 x Manual.It's very useful as an antenna analyzer for your ham station, easy to use.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Dimensions: 1.57 x 6.02 x 3.74 inches | Weight: 1.00 Pounds
See On Amazon
Looking For Something Else?
Search