Best bellows couplings - Buying Guide
Last Updated: 05/04/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
Firestone Ride-Rite 9001 Replacement Bellows
Asin: B003WM6840 | Ean: 5438039801186
Brand: Firestone | Manufacturer: FIRESTONE
Weight: 2.67 Pounds
See On Amazon #2
Echo / Shindaiwa A202000060 BELLOW, INTAKE
Asin: B008G4AFIE | Model: A202000060 | PartNumber: A202000060 | Ean: 0670039886809 | UPC: 670039886809
Brand: echosari | Manufacturer: Shindaiwa
See On Amazon #3
Used South Korean SNKE SKVT10026J Vortex Tube + Pneumatic Cold Air Gun, Air Condenser Tested
Asin: B0D1GB6RDH | Model: SNKE SKVT10026J | PartNumber: SNKE SKVT10026J
Features
- The South Korean SNKE vortex tube is a new high-tech, environmentally friendly, and energy-saving product that utilizes the principle of vortex wind. It is a device that converts compressed air into cold and hot air streams for localized cooling. It requires no electricity or other moving parts, making it suitable for on-site or laboratory localized cooling applications. The SNKE vortex tube can convert compressed air at a normal temperature of 26 C under initial pressure into a cold air stream as low as -40 C and a hot air stream up to 126 C.
- See more on Amazon...
Brand: Generic | Manufacturer: SNKE
Dimensions: 1.00 x 9.00 x 1.00 inches | Weight: 1.10 pounds
See On Amazon #4
Used Germany R+W Bellows Coupling, 8mm-10mm, Outer Diameter 49mm, Length 58mm, Functioning Normally.
Asin: B0D1G6GXBV | Model: R+W bellows coupling 8mm-10mm | PartNumber: R+W bellows coupling 8mm-10mm
Features
- Germany R+W bellows coupling, 8mm-10mm, outer diameter 49mm, length 58mm, functioning normally.
- See more on Amazon...
Brand: Generic | Manufacturer: R+W
Dimensions: 2.28 x 1.93 x 1.93 inches | Weight: 0.44 pounds
See On Amazon #5
Used GAM Bellows Coupling, 8mm*19mm, 8mm-19mm,0.315inches-0.748inches
Asin: B0D1G27TB9 | Model: GAM bellows coupling | PartNumber: GAM bellows coupling
Features
- Used GAM bellows coupling, 8mm-19mm,0.315inches-0.748inches outer diameter: 35mm length: 60mm support end diameter 10mm
- See more on Amazon...
Brand: Generic | Manufacturer: GAM
Dimensions: 2.36 x 1.38 x 1.38 inches | Weight: 1.76 pounds
See On Amazon #6
Aurorad 1/4'' - 2'' BSP Female Thread 304 Stainless Steel Equal 3 Ways Y Type DN8 - DN50 Water Pipe Fitting SS304 Joint Connector (Size : 1-1/4")
Asin: B0BM696L3D | Ean: 8232434212557
Temperature Resistance: -50~300.
Applicable Medium: Water, Gas, Oil, Etc..
Pressure Resistance: 150Lp.
Color: Primary Color.
Features
- Material: SS304
- Color: Primary Color
- Temperature Resistance: -50~300
- Pressure Resistance: 150LP
- Applicable Medium: Water, Gas, Oil, etc.
- See more on Amazon...
Brand: Aurorad | Manufacturer: Aurorad
Weight: 0.00 pounds
See On Amazon #7
Aurorad 1/8'' - 2'' BSP Female Thread 304 Stainless Steel Equal 3 Ways Tee Type Water Pipe Fitting SS304 Joint Connector (Size : 3/8")
Asin: B0BLZ9TYBR | Ean: 8232434171540
Temperature Resistance: -50~300.
Applicable Medium: Water, Gas, Oil, Etc..
Pressure Resistance: 150Lp.
Color: Primary Color.
Features
- Material: SS304
- Color: Primary Color
- Temperature Resistance: -50~300
- Pressure Resistance: 150LP
- Applicable Medium: Water, Gas, Oil, etc.
- See more on Amazon...
Brand: Aurorad | Manufacturer: Aurorad
Weight: 0.00 pounds
See On Amazon #8
Aurorad 1/4'' - 2'' BSP Female Thread Reducing Tee Type 316 Stainless Steel Water Casting Pipe Fitting 316L Joint 3 Ways Connector (Color : 316L, Size : 3I4 to 1I2)
Asin: B0BLZ7VQCL | Ean: 8232434168991
Temperature Resistance: -50~300.
Applicable Medium: Water, Gas, Oil, Etc..
Pressure Resistance: 150Lp.
Color: Primary Color.
Features
- Material: 316L
- Color: Primary Color
- Temperature Resistance: -50~300
- Pressure Resistance: 150LP
- Applicable Medium: Water, Gas, Oil, etc.
- See more on Amazon...
Brand: Aurorad | Manufacturer: Aurorad
Weight: 0.00 pounds
See On Amazon #9
Aurorad 1/4'' - 2'' BSP Male Thread 304 Stainless Steel Equal 3 Ways Tee Type Water Pipe Fitting SS304 Joint Connector (Size : 3/4")
Asin: B0BLZ45DJT | Ean: 8232434166645
Temperature Resistance: -50~300.
Applicable Medium: Water, Gas, Oil, Etc..
Pressure Resistance: 150Lp.
Color: Primary Color.
Features
- Material: SS304
- Color: Primary Color
- Temperature Resistance: -50~300
- Pressure Resistance: 150LP
- Applicable Medium: Water, Gas, Oil, etc.
- See more on Amazon...
Brand: Aurorad | Manufacturer: Aurorad
Weight: 0.00 pounds
See On Amazon #10
Aurorad 50PCS PC Pneumatic Fitting Air Connector Quick Connecors Fitttings PC4-M5 PC4-01 PC6-01 PC6-02 1/8" 1/4" 3/8" 1/2" Male Thread (Color : 4mm, Size : 1/4")
Asin: B0B82C38VF | Ean: 8232432826374
Negative Pressure:-750Mmhg (10 Torr).
Quick Fitting Material:Brass/Plastic.
Operating Temperature Range:Pu / Nylon ,Polyurethane.
Operating Pressure:0~10.2Kgf/Cm2 (0~1.0Mpa).
Features
- Fluid Type:Air / Vacuum
- Operating Pressure:0~10.2kgf/cm2 (0~1.0Mpa)
- Negative Pressure:-750mmhg (10 Torr)
- Operating Temperature Range:PU / Nylon ,Polyurethane
- Quick Fitting Material:Brass/Plastic
- See more on Amazon...
Brand: Aurorad | Manufacturer: Aurorad
Weight: 0.00 pounds
See On Amazon #11
Aurorad PC 304 Stainless Steel External Male Thread Pneumatic Quick Coupling 1/8" 1/4" 3/8" 1/2" BSP Trachea Hose Pipe Connector (Color : 12-03, Size : 304PC)
Asin: B0B813YNWR | Ean: 8232432820655
Material: 304 Stainless Steel.
Maximum Pressure: 40 Bar.
Thread: M5,1/8" 1/4" 3/8" 1/2" Bspt External Thread.
Standard Threaded Interface, Integrated Processing And Forming, High Precision, No Air Leakage..
Features
- Roduct features: 304 stainless steel material, corrosion resistance, high temperature resistance, high pressure resistance, no rust
- Standard threaded interface, integrated processing and forming, high precision, no air leakage.
- Material: 304 stainless steel
- Thread: M5,1/8 1/4 3/8 1/2 BSPT external thread
- Maximum pressure: 40 bar
- See more on Amazon...
Brand: Aurorad | Manufacturer: Aurorad
Weight: 0.00 pounds
See On Amazon #12
Flanged Connector Clamps Side Mounting Tube Supports Base Plate Connector Clamp Strut Clamps Sensor Holders Stands 1Pcs (Size : ZJAM-40)
Asin: B0CPVBKFQL | Model: BAWHO | PartNumber: BAWHO | Ean: 9305523076800
Brand: BAWHO | Manufacturer: BAWHO
Weight: 0.11 pounds
See On Amazon #13
Echo / Shindaiwa A202000001 BELLOWS, INTAKE
Asin: B008G4A8ZE | Model: A202000001 | PartNumber: A202000001
Genuine Oem Echo Replacement Part..
Please Refer To List For Compatibility..
Consult Owners Manual For Proper Part Number Identification And Proper Installation..
New, Bulk Packed..
Features
- Includes (1) A202000001 Intake Bellows.
- New, Bulk Packed.
- Genuine OEM Echo Replacement Part.
- Consult owners manual for proper part number identification and proper installation.
- Please refer to list for compatibility.
- See more on Amazon...
Brand: echosari | Manufacturer: Echo
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.10 pounds
See On Amazon #14
SIMBAE 300PCS AD10Corrugated Pipe Card Buckle Open Tube Harness Casing Tube Head Buckle Automotive Wiring Harness Bellow
Asin: B0C9WR7CQD | Ean: 9350528720302
Features: High Strength, Good Toughness, Bright Surface, Friction Resistance, Beautiful Appearance.
How To Use: Align The Buckle Clamp With The Groove Of The Hose And Close The Buckle.
Application Field: Used To Fix And Limit The Opening Of The Wire Harness Tube To Make The Hose Seam Closed And Beautiful.
Colour: Black.
Features
- Product material: PA66 Working temperature: -30~+125 can reach +140 in a short time
- Colour: Black
- Features: high strength, good toughness, bright surface, friction resistance, beautiful appearance
- Application field: used to fix and limit the opening of the wire harness tube to make the hose seam closed and beautiful
- How to use: Align the buckle clamp with the groove of the hose and close the buckle
- See more on Amazon...
Brand: SIMBAE | Manufacturer: xilinriyonbaihuo
Weight: 0.00 pounds
See On Amazon #15
10 Pieces G2.072.073 HD SM52 Bellow Length 40/35mm tretch Bellows
Asin: B0C7YYHR1M
Brand: WTLMACHINERY | Manufacturer: WTLMACHINERY
See On Amazon #16
Aurorad 1/8'' - 2'' NPT Female Thread 304 Stainless Steel Equal Coupling Straight Water Pipe Fitting SS304 Joint Connector (Color : NPT thread, Size : 3/8")
Asin: B0BMGC5H3F | Ean: 8232434232821
Color: Primary Color.
Pressure Resistance: 150Lp.
Temperature Resistance: -50~300.
Thread: Npt.
Features
- Material: SS304
- Thread: NPT
- Color: Primary Color
- Temperature Resistance: -50~300
- Pressure Resistance: 150LP
- See more on Amazon...
Brand: Aurorad | Manufacturer: Aurorad
Weight: 0.00 pounds
See On Amazon #17
Aurorad 1/4'' - 2'' BSP Male Thread x Barb Hose Tail 316 Stainless Steel Water Pipe Fitting Reducer Pagoda 316L Joint Coupling Connector (Color : 316L, Size : 1 to 25mm)
Asin: B0BM5M35Y5 | Ean: 8232434209328
Temperature Resistance: -50~300.
Applicable Medium: Water, Gas, Oil, Etc..
Pressure Resistance: 150Lp.
Color: Primary Color.
Features
- Material: 316L
- Color: Primary Color
- Temperature Resistance: -50~300
- Pressure Resistance: 150LP
- Applicable Medium: Water, Gas, Oil, etc.
- See more on Amazon...
Brand: Aurorad | Manufacturer: Aurorad
Weight: 0.00 pounds
See On Amazon #18
Aurorad 1/8'' - 2'' NPT Female Thread Screw Union 304 Stainless Steel Water Casting Pipe Fitting Joint Coupling Connector (Color : NPT thread, Size : 1/8")
Asin: B0BM3PW989 | Ean: 8232434180474
Color: Primary Color.
Pressure Resistance: 150Lp.
Temperature Resistance: -50~300.
Thread: Npt.
Features
- Material: SS304
- Thread: NPT
- Color: Primary Color
- Temperature Resistance: -50~300
- Pressure Resistance: 150LP
- See more on Amazon...
Brand: Aurorad | Manufacturer: Aurorad
Weight: 0.00 pounds
See On Amazon #19
Aurorad 1/2'' 3/4'' 1'' Female Thread 3-Piece Full Port 304 Stainless Steel Ball Valve (Color : 1", Size : BSP)
Asin: B0B93M7DWH | Ean: 8232433033146
1/4 Inch = Dn8 Bsp Female Thread 11.5 Mm.
1/2 Inch = Dn15 Bsp Female Thread 19 Mm.
3/8 Inch = Dn10 Bsp Female Thread 15 Mm.
1/8 Inch = Dn6 Bsp Female Thread 8.8 Mm.
Features
- *BSP thread: British standard pipe thread
- 1/8 inch = DN6 BSP female thread 8.8 mm
- 1/4 inch = DN8 BSP female thread 11.5 mm
- 3/8 inch = DN10 BSP female thread 15 mm
- 1/2 inch = DN15 BSP female thread 19 mm
- See more on Amazon...
Brand: Aurorad | Manufacturer: Aurorad
Weight: 0.00 pounds
See On Amazon #20
Maxmartt Strong Pressure Dust Blower Stainless Steel Pneumatic Air Dust Blower
Asin: B08835953L | Ean: 6926836334314
The Handle Is Designed In Accordance With The Design Of Human Engineering Mechanics And It Is Labor-Saving..
The Long Pipe Makes It Easier For Your To Reaches Some Place Deep..
The Nickel Plated Stainless Steel Pipe Has High Hardness And Not Easy To Break Up..
The Advanced Valve Provides Longer Service Life,More Practical..
Features
- The air blower gun has enough strong blow force to clean the dust clearly.
- The advanced valve provides longer service life,more practical.
- The handle is designed in accordance with the design of human engineering mechanics and it is labor-saving.
- The nickel plated stainless steel pipe has high hardness and not easy to break up.
- The long pipe makes it easier for your to reaches some place deep.
- See more on Amazon...
Brand: Maxmartt | Manufacturer: Maxmartt
See On Amazon #21
R and W Bkl-15-24-12, Metal Bellows Coupling, Torque: 15Nm Bkl-15-24-12
Asin: B07N97XGM3 | Model: BKL-15-24-12 | PartNumber: BKL-15-24-12
Condition: Used - Good.
Product Dimensions: 8.00 X 8.00 X 7.00 Inches.
Brand: RW | Manufacturer: R AND W
Dimensions: 0.28 x 0.31 x 0.31 inches | Weight: 1.67 pounds
See On Amazon #22
Ruland MBC41-16-16-A 2024 or 7075 Aluminum Hubs Bellows Coupling, Clamp Style, 16 mm x 16 mm Bores, 41.3 mm OD, 50.8 mm Length
Asin: B016APPMK6 | Model: MBC41-16-16-A | PartNumber: MBC41-16-16-A | Ean: 0634529064184 | UPC: 634529064184
Thin Walls Of The Bellows Allow The Coupling To Flex Easily While Remaining Rigid Under Torsional Loads.
Hardware Exceeds Din 912 12.9 Standards For Maximum Torque Capabilities. Ruland Beam Couplings Are Carefully Made From Select North American Bar Stock In Our Marlborough, Massachusetts Factory And Are Rohs3 And Reach Compliant..
Manufactured From 7075 Aluminum For Light Weight And Low Inertia..
Manufactured From High Strength 2024 Aluminum With A Balanced Design For Reduced Vibration At Speeds Up To 10,000 Rpm.
Features
- Bellows coupling have zero-backlash with high torsional stiffness for high accuracy and repeatability
- Manufactured from high strength 2024 aluminum with a balanced design for reduced vibration at speeds up to 10,000 RPM
- Thin walls of the bellows allow the coupling to flex easily while remaining rigid under torsional loads
- Manufactured from 7075 aluminum for light weight and low inertia.
- Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities. Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant.
- See more on Amazon...
Brand: Ruland | Manufacturer: Ruland Manufacturing Co., Inc.
Dimensions: 2.50 x 3.00 x 2.50 inches
See On Amazon #23
Ruland MBC41-17-14-A 2024 or 7075 Aluminum Hubs Bellows Coupling, Clamp Style, 17 mm x 14 mm Bores, 41.3 mm OD, 50.8 mm Length
Asin: B016APPMJM | Model: MBC41-17-14-A | PartNumber: MBC41-17-14-A | Ean: 0634529099681 | UPC: 634529099681
Thin Walls Of The Bellows Allow The Coupling To Flex Easily While Remaining Rigid Under Torsional Loads.
Hardware Exceeds Din 912 12.9 Standards For Maximum Torque Capabilities. Ruland Beam Couplings Are Carefully Made From Select North American Bar Stock In Our Marlborough, Massachusetts Factory And Are Rohs3 And Reach Compliant..
Manufactured From 7075 Aluminum For Light Weight And Low Inertia..
Manufactured From High Strength 2024 Aluminum With A Balanced Design For Reduced Vibration At Speeds Up To 10,000 Rpm.
Features
- Bellows coupling have zero-backlash with high torsional stiffness for high accuracy and repeatability
- Manufactured from high strength 2024 aluminum with a balanced design for reduced vibration at speeds up to 10,000 RPM
- Thin walls of the bellows allow the coupling to flex easily while remaining rigid under torsional loads
- Manufactured from 7075 aluminum for light weight and low inertia.
- Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities. Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant.
- See more on Amazon...
Brand: Ruland | Manufacturer: Ruland Manufacturing Co., Inc.
See On Amazon #24
Ruland MBC41-16-15-A 2024 or 7075 Aluminum Hubs Bellows Coupling, Clamp Style, 16 mm x 15 mm Bores, 41.3 mm OD, 50.8 mm Length
Asin: B016APPMA6 | Model: MBC41-16-15-A | PartNumber: MBC41-16-15-A | Ean: 0634529064177 | UPC: 634529064177
Thin Walls Of The Bellows Allow The Coupling To Flex Easily While Remaining Rigid Under Torsional Loads.
Hardware Exceeds Din 912 12.9 Standards For Maximum Torque Capabilities. Ruland Beam Couplings Are Carefully Made From Select North American Bar Stock In Our Marlborough, Massachusetts Factory And Are Rohs3 And Reach Compliant..
Manufactured From 7075 Aluminum For Light Weight And Low Inertia..
Manufactured From High Strength 2024 Aluminum With A Balanced Design For Reduced Vibration At Speeds Up To 10,000 Rpm.
Features
- Bellows coupling have zero-backlash with high torsional stiffness for high accuracy and repeatability
- Manufactured from high strength 2024 aluminum with a balanced design for reduced vibration at speeds up to 10,000 RPM
- Thin walls of the bellows allow the coupling to flex easily while remaining rigid under torsional loads
- Manufactured from 7075 aluminum for light weight and low inertia.
- Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities. Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant.
- See more on Amazon...
Brand: Ruland | Manufacturer: Ruland Manufacturing Co., Inc.
Dimensions: 2.00 x 6.00 x 2.00 inches | Weight: 0.01 pounds
See On Amazon #25
Ruland MBC41-15-15-A 2024 or 7075 Aluminum Hubs Bellows Coupling, Clamp Style, 15 mm x 15 mm Bores, 41.3 mm OD, 50.8 mm Length
Asin: B016APPM9C | Model: MBC41-15-15-A | PartNumber: MBC41-15-15-A | Ean: 0634529064139 | UPC: 634529064139
Thin Walls Of The Bellows Allow The Coupling To Flex Easily While Remaining Rigid Under Torsional Loads.
Hardware Exceeds Din 912 12.9 Standards For Maximum Torque Capabilities. Ruland Beam Couplings Are Carefully Made From Select North American Bar Stock In Our Marlborough, Massachusetts Factory And Are Rohs3 And Reach Compliant..
Manufactured From 7075 Aluminum For Light Weight And Low Inertia..
Manufactured From High Strength 2024 Aluminum With A Balanced Design For Reduced Vibration At Speeds Up To 10,000 Rpm.
Features
- Bellows coupling have zero-backlash with high torsional stiffness for high accuracy and repeatability
- Manufactured from high strength 2024 aluminum with a balanced design for reduced vibration at speeds up to 10,000 RPM
- Thin walls of the bellows allow the coupling to flex easily while remaining rigid under torsional loads
- Manufactured from 7075 aluminum for light weight and low inertia.
- Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities. Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant.
- See more on Amazon...
Brand: Ruland | Manufacturer: Ruland Manufacturing Co., Inc.
Dimensions: 2.00 x 6.00 x 2.00 Inches
See On Amazon #26
Ruland MBC33-14-14-A 2024 or 7075 Aluminum Hubs Bellows Coupling, Clamp Style, 14 mm x 14 mm Bores, 33.3 mm OD, 42.9 mm Length
Asin: B016APPKXA | Model: MBC33-14-14-A | PartNumber: MBC33-14-14-A | Ean: 0634529063903 | UPC: 634529063903
Thin Walls Of The Bellows Allow The Coupling To Flex Easily While Remaining Rigid Under Torsional Loads.
Hardware Exceeds Din 912 12.9 Standards For Maximum Torque Capabilities. Ruland Beam Couplings Are Carefully Made From Select North American Bar Stock In Our Marlborough, Massachusetts Factory And Are Rohs3 And Reach Compliant..
Manufactured From 7075 Aluminum For Light Weight And Low Inertia..
Manufactured From High Strength 2024 Aluminum With A Balanced Design For Reduced Vibration At Speeds Up To 10,000 Rpm.
Features
- Bellows coupling have zero-backlash with high torsional stiffness for high accuracy and repeatability
- Manufactured from high strength 2024 aluminum with a balanced design for reduced vibration at speeds up to 10,000 RPM
- Thin walls of the bellows allow the coupling to flex easily while remaining rigid under torsional loads
- Manufactured from 7075 aluminum for light weight and low inertia.
- Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities. Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant.
- See more on Amazon...
Brand: Ruland | Manufacturer: Ruland Manufacturing Co., Inc.
Dimensions: 1.50 x 4.00 x 1.50 inches
See On Amazon #27
Ruland MBC33-14-10-A 2024 or 7075 Aluminum Hubs Bellows Coupling, Clamp Style, 14 mm x 10 mm Bores, 33.3 mm OD, 42.9 mm Length
Asin: B016APPKT4 | Model: MBC33-14-10-A | PartNumber: MBC33-14-10-A | Ean: 0634529063880 | UPC: 634529063880
Thin Walls Of The Bellows Allow The Coupling To Flex Easily While Remaining Rigid Under Torsional Loads.
Hardware Exceeds Din 912 12.9 Standards For Maximum Torque Capabilities. Ruland Beam Couplings Are Carefully Made From Select North American Bar Stock In Our Marlborough, Massachusetts Factory And Are Rohs3 And Reach Compliant..
Manufactured From 7075 Aluminum For Light Weight And Low Inertia..
Manufactured From High Strength 2024 Aluminum With A Balanced Design For Reduced Vibration At Speeds Up To 10,000 Rpm.
Features
- Bellows coupling have zero-backlash with high torsional stiffness for high accuracy and repeatability
- Manufactured from high strength 2024 aluminum with a balanced design for reduced vibration at speeds up to 10,000 RPM
- Thin walls of the bellows allow the coupling to flex easily while remaining rigid under torsional loads
- Manufactured from 7075 aluminum for light weight and low inertia.
- Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities. Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant.
- See more on Amazon...
Brand: Ruland | Manufacturer: Ruland Manufacturing Co., Inc.
Dimensions: 1.50 x 4.00 x 1.50 inches
See On Amazon #28
Ruland MBC25-10-10-A 2024 or 7075 Aluminum Hubs Bellows Coupling, Clamp Style, 10 mm x 10 mm Bores, 25.4 mm OD, 33.3 mm Length
Asin: B016APPJCC | Model: MBC25-10-10-A | PartNumber: MBC25-10-10-A | Ean: 0634529063736 | UPC: 634529063736
Thin Walls Of The Bellows Allow The Coupling To Flex Easily While Remaining Rigid Under Torsional Loads.
Hardware Exceeds Din 912 12.9 Standards For Maximum Torque Capabilities. Ruland Beam Couplings Are Carefully Made From Select North American Bar Stock In Our Marlborough, Massachusetts Factory And Are Rohs3 And Reach Compliant..
Manufactured From 7075 Aluminum For Light Weight And Low Inertia..
Manufactured From High Strength 2024 Aluminum With A Balanced Design For Reduced Vibration At Speeds Up To 10,000 Rpm.
Features
- Bellows coupling have zero-backlash with high torsional stiffness for high accuracy and repeatability
- Manufactured from high strength 2024 aluminum with a balanced design for reduced vibration at speeds up to 10,000 RPM
- Thin walls of the bellows allow the coupling to flex easily while remaining rigid under torsional loads
- Manufactured from 7075 aluminum for light weight and low inertia.
- Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities. Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant.
- See more on Amazon...
Brand: Ruland | Manufacturer: Ruland Manufacturing Co., Inc.
See On Amazon
Looking For Something Else?
Search