Best current probes - Buying Guide
Last Updated: 05/04/2024
Share on
Bestselling current probes on Amazon
- Fluke I310S AC/DC Current Probe, +/-100mA Resolution, 300V AC/ DC Voltage, 450A DC, 300A AC rms Current
- AEMC Instruments 2112.48 - 3000-36-1-1 AmpFlex Flexible Current Probe - 36" 3000A w/1mV/A Output
- OWON CP024 AC/DC Current Probe for Oscilloscope, Current Clamp Probe 200KHz Bandwidth 4A, 40A, 200A,...
- Fluke AS400 Probe Accessory Kit, For the VPS400 Probes
- AEMC - 2140.34 193-24-BK AmpFlex Sensor for use with Models 8220, 8230, 3945, 3945-B and 8335 Analyz...
- Fluke 85RF II High Frequency Probe, 0.25 - 30V rms Voltage Range, 500 MHz Frequency
- AEMC ALS-1 AC Line Splitter with Current Probe for Clamp-On Meters and Multimeters
- AEMC MN103 AC Current Probe with 5' Lead, 1mA to 10A and 1A to 100A Range, 1mV/mA/1mV/A Output
- Fluke I1000S Large AC Current Probe, 600V AC Voltage, 1000A rms Current, 5 Hz to 100 kHz
- 100pcs P50-J1 P50-B1 P75-B1 P75-E2 P100-E2 Spring Test Probe Round Pogo Pin Tools
#1
Fluke I310S AC/DC Current Probe, +/-100mA Resolution, 300V AC/ DC Voltage, 450A DC, 300A AC rms Current
Asin: B0012WZZ8M | Model: I310S | PartNumber: I310S | Ean: 0095969401241, 0013088367576 | UPC: 095969401241, 013088367576
It May Be Used In Conjunction With Oscilloscopes And Other Suitable Recording Instruments For Accurate Non-Intrusive Current Measurement.
Load Impedance: Greater Than 10 K Ohms And Less Than Or Equal To 100 Pf.
Output Sensitivity: 10 Mv/A (40 A) To 1 Mv/A (400 A).
Use In Measurement Of Both Dc And Ac Current.
Features
- Current probe is based on hall effect technology
- Use in measurement of both DC and AC current
- It may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement
- Output Sensitivity: 10 mV/A (40 A) to 1 mV/A (400 A)
- Load impedance: greater than 10 k ohms and less than or equal to 100 pF
- See more on Amazon...
Brand: Fluke | Manufacturer: Fluke Corporation
Dimensions: 2.50 x 9.40 x 4.10 Inches | Weight: 0.95 pounds
See On Amazon #2
AEMC Instruments 2112.48 - 3000-36-1-1 AmpFlex Flexible Current Probe - 36" 3000A w/1mV/A Output
Asin: B00KYUNEG8 | Model: 2112.48 | PartNumber: 2112.48 | Ean: 0685338100143 | UPC: 685338100143
Waterproof Sensor.
Shape Memory For Custom Pre-Shaping Of Sensor Before Use.
No Core Saturation Or Damage If Overloaded.
Trms Measurements When Connected To A Trms Instrument.
Features
- Accuracy 1% of Reading
- TRMS measurements when connected to a TRMS instrument
- Waterproof sensor
- No core saturation or damage if overloaded
- Shape Memory for custom pre-shaping of sensor before use
- See more on Amazon...
Brand: AEMC | Manufacturer: AEMC
See On Amazon #3
OWON CP024 AC/DC Current Probe for Oscilloscope, Current Clamp Probe 200KHz Bandwidth 4A, 40A, 200A, 300-400A Test Range, Current Tester Clamp Meter with BNC Type Connector
Asin: B0C89QNH4Z
【Easy To Use】: The Current Probe Can Set The Range Selection Through The Slide Switch On The Probe Handle, Which Is Very Convenient In Use. There Is No Need To Break Into The Circuit Or Disturb The Isolation As The Opening Jaws Simply Clamp Around The Current Carrying Conductor. No Electrical Contact Is Required. 23Mm Maximum Jaw Can Meet Daily Testrequirements. Equipped With 9V Battery Compartment, Easy To Replace..
【Package Accessories】Purchase Owon Current Probe You Will Get A Very Cost-Effective Value Pack, Including: Cp024 X 1, Battery X 1, Quick Guide X 1, Soft Bag X 1. Cp024 Dimension(W*H*D) : 180 X 68 X32(Mm). Owon Is Committed To Providing More Professional And High-Performance Products For Electrical Professionals, Adding Dc And Ac Current Measurement Functions To Your Digital Oscilloscopes..
【Bnc Interfacer】Owon Current Probe Multimeter Has Standard Insulated Bnc Interface, Common To All Brands Of Oscilloscopes And Can Be Plugged To Use Directly. After Connected Well, Switch The Current Clamp On , Power Led Light, And Then Clamp The Jaws Around The Current Carrying Conductor As Shown. The Ac/Dc Current Probe Simply Offers The Best Value For Money Without Compromising Resolution..
【Various Test Range】: Owon Cp024 Current Clamp Is Super Suitable For Automotive Oscilloscope To Measure Currents Between 1 Ma And 400 A. The Test Range From 4A, 40A, 200A, 300-400A Can Meet Your Various Measurement Needs..
Features
- Great Performance Current Probe OWON current probe are very powerful tools for extending the current range of oscilloscope tools. Current tester clamp with very high performance support Auto zero at power on, relative zero correction, low battery indication, bandwidth up to 200KHz, low noise level, and high detection accuracy. Adopt of amorphous alloy core, it has the characteristics of high performance and low loss.
- Various Test Range : OWON CP024 current clamp is super suitable for automotive oscilloscope to measure currents between 1 mA and 400 A. The test range from 4A, 40A, 200A, 300-400A can meet your various measurement needs.
- Easy to Use : The current probe can set the range selection through the slide switch on the probe handle, which is very convenient in use. There is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required. 23mm maximum jaw can meet daily testrequirements. Equipped with 9V battery compartment, easy to replace.
- BNC interfacer OWON current probe multimeter has standard insulated BNC interface, common to all brands of oscilloscopes and can be plugged to use directly. After connected well, switch the current clamp on , power LED light, and then clamp the jaws around the current carrying conductor as shown. The AC/DC Current Probe simply offers the best value for money without compromising resolution.
- Package Accessories Purchase OWON Current probe you will get a very cost-effective value pack, including: CP024 X 1, Battery X 1, Quick Guide X 1, Soft Bag X 1. CP024 Dimension(W*H*D) : 180 x 68 x32(mm). OWON is committed to providing more professional and high-performance products for electrical professionals, adding DC and AC current measurement functions to your digital oscilloscopes.
- See more on Amazon...
Brand: OWON | Manufacturer: OWON
Dimensions: 1.89 x 8.66 x 4.13 inches
See On Amazon #4
Fluke AS400 Probe Accessory Kit, For the VPS400 Probes
Asin: B00937VICA | Model: AS400 | PartNumber: AS400 | Ean: 6919981000784, 0013227031665, 0095969580397, 5053252423221 | UPC: 013227031665, 095969580397
The Package Width Is 11.684 Centimeters.
Package Weight : 0.25 Pounds.
The Package Height Is 3.555 Centimeters.
Features
- The package length is 18.541 centimeters
- The package height is 3.555 centimeters
- The package width is 11.684 centimeters
- Package Weight : 0.25 pounds
- See more on Amazon...
Brand: Fluke | Manufacturer: Fluke Corporation
Dimensions: 1.57 x 7.48 x 4.72 inches | Weight: 0.25 Pounds
See On Amazon #5
AEMC - 2140.34 193-24-BK AmpFlex Sensor for use with Models 8220, 8230, 3945, 3945-B and 8335 Analyzer, 24" Length
Asin: B008S0E9Q0 | Model: 193-24-BK | PartNumber: 193-24-BK | Ean: 0685338229745 | UPC: 685338229745
Country Of Origin :France.
Package Weight :1.0Lbs.
Product Type :Precision_Measuring.
Features
- package dimensions :6.8 cm L x 18.0 cm W x 26.5 cm H
- Product type :PRECISION_MEASURING
- country of origin :France
- package weight :1.0lbs
- See more on Amazon...
Brand: AEMC | Manufacturer: AEMC
See On Amazon #6
Fluke 85RF II High Frequency Probe, 0.25 - 30V rms Voltage Range, 500 MHz Frequency
Asin: B00937VAW8 | Model: 85RF II | PartNumber: 85RF II | Ean: 0782247525347, 6920545381003, 0095969610674 | UPC: 782247525347, 095969610674
The Probe's Dc Output Is Calibrated To Be Equivalent To The Rms Value Of A Sine Wave Input.
30V Rms, 200V Dc Maximum Input Voltage.
0.25 To 30V Rms Voltage Range.
Conversion From Ac To Dc Is Accomplished On A One-To-One Basis Includes A Range Of 0.25 To 30V Rms.
Features
- High frequency probe is designed to convert a DC voltmeter with a input impedance of 10 megaohms into a high frequency (100kHz to 500 MHz) RF voltmeter
- Conversion from AC to DC is accomplished on a one-to-one basis includes a range of 0.25 to 30V rms
- The probe's DC output is calibrated to be equivalent to the rms value of a sine wave input
- 0.25 to 30V rms voltage range
- 30V RMS, 200V DC maximum input voltage
- See more on Amazon...
Brand: Fluke | Manufacturer: Fluke Corporation
Dimensions: 1.30 x 9.00 x 3.30 Inches | Weight: 0.28 pounds
See On Amazon #7
AEMC ALS-1 AC Line Splitter with Current Probe for Clamp-On Meters and Multimeters
Asin: B008S06YKE | Model: ALS-1 | PartNumber: ALS-1 | Ean: 0685338120042 | UPC: 685338120042
Direct Reading X1 Mode.
Integral Ground Conductor And 120V, 15A Capacity.
Voltmeter Input Jacks.
Increases Sensitivity Of Clamp-On Probes And Clamp-On Meters Ten Times In X10 Mode.
Features
- Avoids splitting lines, makes reading current easy
- Increases sensitivity of clamp-on probes and clamp-on meters ten times in X10 mode
- Direct reading X1 mode
- Voltmeter input jacks
- Integral ground conductor and 120V, 15A capacity
- See more on Amazon...
Brand: AEMC | Manufacturer: AEMC
See On Amazon #8
AEMC MN103 AC Current Probe with 5' Lead, 1mA to 10A and 1A to 100A Range, 1mV/mA/1mV/A Output
Asin: B008S078DQ | Model: MN103 | PartNumber: MN103 | Ean: 0013227067480, 0685338030259 | UPC: 685338030259, 013227067480
Measurements From 1Ma To 100Aac.
Permits Very Low Ac Current Measurements.
Excellent Companion To All Dmms.
Clothes Pin Shape Makes Them Ideal For Use In Tight Areas, Such As Breaker Panels, Controller Panels, Or Outlets.
Features
- Small, compact and very tough AC probes
- Clothes pin shape makes them ideal for use in tight areas, such as breaker panels, controller panels, or outlets
- Measurements from 1mA to 100AAC
- Excellent companion to all DMMs
- Permits very low AC current measurements
- See more on Amazon...
First Available: 03/12/2017
Brand: AEMC | Manufacturer: AEMC
Weight: 0.90 pounds
See On Amazon #9
Fluke I1000S Large AC Current Probe, 600V AC Voltage, 1000A rms Current, 5 Hz to 100 kHz
Asin: B000LDQ3SE | Model: I1000S | PartNumber: I1000S | Ean: 0095969090476 | UPC: 095969090476
Connects Directly To An Oscilloscope Through A Reinforced Coaxial Cable And An Insulated Bnc Connector.
1 Year Warranty.
Can Be Used With Multimeters With Optional Pm9081/001 Bnc/Banana Adapter.
A Passive Filter Eliminates Noise And Ring On Rapidly Rising Di/Dt Waveform, Ensuring Accurate Screen Displays.
Features
- Allows accurate measurement of currents from 100 mA to 1000 A rms, 5 Hz to 100 kHz without breaking into the circuit
- A passive filter eliminates noise and ring on rapidly rising di/dt waveform, ensuring accurate screen displays
- Connects directly to an oscilloscope through a reinforced coaxial cable and an insulated BNC connector
- Can be used with Multimeters with optional PM9081/001 BNC/Banana adapter
- 1 year warranty
- See more on Amazon...
Brand: Fluke | Manufacturer: Fluke Corporation
Dimensions: 0.47 x 3.74 x 1.97 inches | Weight: 0.40 pounds
See On Amazon #10
100pcs P50-J1 P50-B1 P75-B1 P75-E2 P100-E2 Spring Test Probe Round Pogo Pin Tools
Asin: B0D18WRBL5 | Model: NOENNULLy5xh7grm6p | PartNumber: NOENNULLy5xh7grm6p
Cone Shape Head Can Be Used For Testing Through-Hole Components..
They Are Great Replacement Probes If You Need To Change Broken Or Old Test Probes..
Widely Used For Testing Pcb Gold Fingers(Edge Connectors) And Pads..
There Are Total 100Pcs Spring Test Probes In One Set That You Can Use For A Long Time..
Features
- Spring test probes are necessary parts for PCB testing to access components on printed circuit assemblies.
- There are total 100Pcs spring test probes in one set that you can use for a long time.
- Cone shape head can be used for testing through-hole components.
- Widely used for testing PCB gold fingers(edge connectors) and pads.
- They are great replacement probes if you need to change broken or old test probes.
- See more on Amazon...
Brand: NOENNULL | Manufacturer: NOENNULL
See On Amazon #11
NOENNULL 100pcs P50-J1 P50-B1 P75-B1 P75-E2 P100-E2 Spring Test Probe Round Pogo Pin Tools
Asin: B0D185H413 | Model: NOENNULLyo90zvidr7 | PartNumber: NOENNULLyo90zvidr7
They Are Great Replacement Probes If You Need To Change Broken Or Old Test Probes..
Cone Shape Head Can Be Used For Testing Through-Hole Components..
Spring Test Probes Are Necessary Parts For Pcb Testing To Access Components On Printed Circuit Assemblies..
Widely Used For Testing Pcb Gold Fingers(Edge Connectors) And Pads..
Features
- There are total 100Pcs spring test probes in one set that you can use for a long time.
- Widely used for testing PCB gold fingers(edge connectors) and pads.
- They are great replacement probes if you need to change broken or old test probes.
- Spring test probes are necessary parts for PCB testing to access components on printed circuit assemblies.
- Cone shape head can be used for testing through-hole components.
- See more on Amazon...
Brand: NOENNULL | Manufacturer: NOENNULL
See On Amazon #12
Professional Electrical Multimeter Test Leads Set with Test Hook,Alligator Clips, Test tweezer,Test Probes Lead Kit for Digital Electrical Multimeter Testing,Circuit Connection, Experiment Testing
Asin: B0CXP8MLN7 | Ean: 0658361487475 | UPC: 658361487475
Flexible To Use：The Banana Plug Multimeter Leads/Capacitor Clip Can Be Connected To Any Other Accessory With A 4Mm Socket In This Kit.The Alligator Clips, Test Hook Clips And Test Tweezer Can Help Expand Testing Capability And Flexibility..
What You Get: 2Pcs Multimeter Leads, 2Pcs Alligator Clips,2Pcs Smd Ic Test Hook Clips With Extension Leads,2Pcs Test Probes 1Pcs Test Probe Tweezer..
Wide Applications:Our Multimeter Test Leads Kit Works Perfectly With Any Multimeter And Test Instrument. Widely Used In Different Measurement Environments,Such As Industrial, Electronics, Home, Automotive And Laboratories....Perfect For Continuity Testing Of Circuit Board Components, Resistors, Logical Analyzer Capacitors Or Other Smd Components..
Excellent Test Tip And Plug:This Multimeter Test Leads Feature Soft Premium Silicone Insulation For An Ultra-Soft Handle Feeling. All The Accessories Are Anti-Slip Design And Ergonomically.Pure Nickel Plated Copper Test Lead Tips,Has Solid Contact Traits And Speedy And Stable Measuring Reaction Times.And Ensure High Strength, Conductivity, Long Life And Accurate Data. Voltage: 1000V. Current: 20A..
Features
- More Universal Compatible With four different connectors that can be replaced: alligator clips, needle probes,test tweezer and test hooks, they can be switched to meet your different testing needs.
- Excellent test tip and plug:This multimeter test leads feature soft premium silicone insulation for an ultra-soft handle feeling. All the accessories are anti-slip design and ergonomically.Pure nickel plated copper test lead tips,has solid contact traits and speedy and stable measuring reaction times.and ensure high strength, conductivity, long life and accurate data. Voltage: 1000V. Current: 20A.
- Flexible to Use The banana plug multimeter leads/capacitor clip can be connected to any other accessory with a 4mm socket in this kit.The alligator clips, test hook clips and test tweezer can help expand testing capability and flexibility.
- Wide Applications:Our multimeter test leads kit works perfectly with any multimeter and test instrument. Widely used in different measurement environments,such as industrial, electronics, home, automotive and laboratories....Perfect for continuity testing of circuit board components, resistors, logical analyzer capacitors or other SMD components.
- What You Get: 2PCS Multimeter Leads, 2PCS Alligator Clips,2PCS SMD IC test hook clips with extension leads,2PCS Test Probes 1PCS Test Probe Tweezer.
- See more on Amazon...
Brand: Col-Pary | Manufacturer: Col-Pary
See On Amazon #13
testo Smart Probe Kit I HVAC/R Test and Load Set for air Conditioning & 557s Kit I App Operated Digital Manifold, 2 x testo 115i Pipe Clamp Thermometer
Asin: B0CWR5592N
Product 1: Testo 115I: With A Grip Of Up To 1.5”, The Wireless Thermometer Provides Quick And Reliable Temperature And Flow And Return Temperature Measurements Of Pipes.
Product 2: 552I Micron Gauge; The Testo 552I Achieves Precise Deep Vacuum Measurements Down To Single Digit Resolutions And Provides Notifications When The Evacuation Target Is Met.
Product 2: 115I Thermometer; Thanks To A Grip Of Up To 1.5”, The Wireless Pipe Clamp Thermometer Provides Quick And Convenient Temperature And Flow And Return Temperature Measurements Of Pipes.
Product 2: Accurate; The Vacuum Gauge Replaces Multiple Hvac Gauges And Was Developed Deliver Extremely Precise Temperature Measurement Accuracy Of +- 0.9 °F And Pressure Measurement Accuracy Of +- 0.5% Fs.
Product 2: User-Friendly; With Its Intuitive Menu, 4-Way Valve Block And Automated Probe Connection, The Manometer Provides Convenient Pressure Measurement In Areas That Are Difficult To Access.
Product 1: Testo 549I: The Pressure Meter Enables Accurate Readings For High And Low Pressure. The 45-Degree Connector Simplifies Servicing And Troubleshooting – Without The Need For Hoses.
Product 1: Testo 605I: The Thermohygrometer Is Equipped With A Bendable Probe Head And Thus Achieves Remote Temperature Measurements In Rooms, Ducts, Crawl Spaces And Registers.
Features
- Product 1: Efficient: The testo smart probe set offers precise measurements and calculations for heating and cooling systems, making it ideal for all HVAC/R contractors and technicians
- Product 1: Testo 605i: The thermohygrometer is equipped with a bendable probe head and thus achieves remote temperature measurements in rooms, ducts, crawl spaces and registers
- Product 1: Testo 115i: With a grip of up to 1.5 , the wireless thermometer provides quick and reliable temperature and flow and return temperature measurements of pipes
- Product 1: Testo 549i: The pressure meter enables accurate readings for high and low pressure. The 45-degree connector simplifies servicing and troubleshooting without the need for hoses
- Product 2: ACCURATE; The vacuum gauge replaces multiple HVAC gauges and was developed deliver extremely precise temperature measurement accuracy of +- 0.9 F and pressure measurement accuracy of +- 0.5% Fs
- Product 2: USER-FRIENDLY; With its intuitive menu, 4-way valve block and automated probe connection, the manometer provides convenient pressure measurement in areas that are difficult to access
- Product 2: 552i MICRON GAUGE; The testo 552i achieves precise deep vacuum measurements down to single digit resolutions and provides notifications when the evacuation target is met
- Product 2: 115i THERMOMETER; Thanks to a grip of up to 1.5 , the wireless pipe clamp thermometer provides quick and convenient temperature and flow and return temperature measurements of pipes
- See more on Amazon...
Brand: Testo
See On Amazon #14
AC DC Current Probe CP2100B 10A 100A Measuring Tool with BNC Interface Split Type Design for Motor Drive Power Frequency
Asin: B0CW6HL223 | Model: Kadimendium3fazvy2sog | PartNumber: Kadimendium3fazvy2sog
[Bnc Interface]: Equipped With A Standard Bnc Interface, This Probe Is Compatible With Oscilloscopes And Multimeters, Providing A Reliable Connection For Accurate Readings..
[Split Type Design]: The Innovative Split Design Of The Probe And Control Box Ensures Safety During Measurements, Allowing For Easy Portability And Operation In Diverse Settings..
[Measuring Range]: This Current Probe Offers A Wide Measurement Range Of 50Ma‑10Apk (10A) And 1A‑100Apk (100A), Enabling Precise Current Measurement For Various Applications..
[Applicable Fields]: Widely Used In Motor Drive, Power Frequency, Inverter, Power Supply, Avionics, And More, This Ac Dc Current Probe Is Essential For Various Industrial And Research Applications..
Features
- [Multiple Function]: Featuring automatic and manual zero setting, demagnetization function, and USB power supply connection, this probe offers versatile functions for enhanced usability.
- [Applicable Fields]: Widely used in motor drive, power frequency, inverter, power supply, avionics, and more, this AC DC current probe is essential for various industrial and research applications.
- [Bnc Interface]: Equipped with a standard BNC interface, this probe is compatible with oscilloscopes and multimeters, providing a reliable connection for accurate readings.
- [Measuring Range]: This current probe offers a wide measurement range of 50mA 10Apk (10A) and 1A 100Apk (100A), enabling precise current measurement for various applications.
- [Split Type Design]: The innovative split design of the probe and control box ensures safety during measurements, allowing for easy portability and operation in diverse settings.
- See more on Amazon...
Brand: Kadimendium | Manufacturer: Kadimendium
See On Amazon #15
Portable High Accuracy Diamond Selector for Novice and Expert Electronic Diamond Tester Tool for Jewelry Jade Ruby Stone
Asin: B0CRZ2Z27H
Led Light And Audio Result Indication..
Green Indicator Will Be Showed If The Stone Is A Real Diamond. It Will Make Continuous Buzzing Sound When User Accidentally Touches Metal Rather Than Stone..
Simple Calibration For Stones Of Various Sizes..
This Tester Comes With A Pu Case And Small Testing Platform For Holding Loose Stones..
Features
- This diamond tester has a highly compact design and will help you to tell the difference between a genuine diamond and fake diamond.
- This tester comes with a PU case and small testing platform for holding loose stones.
- LED light and audio result indication.
- Simple calibration for stones of various sizes.
- Green indicator will be showed if the stone is a real diamond. It will make continuous buzzing sound when user accidentally touches metal rather than stone.
- See more on Amazon...
Brand: Generic
See On Amazon #16
Digital Accuracy Diamond Gems Tester Pen Gemstone Selector Indicator Detector LED Indicator Accurate Reliable Jewelry Test Tool
Asin: B0CRZ2LBDL
Led Light And Audio Result Indication..
Green Indicator Will Be Showed If The Stone Is A Real Diamond. It Will Make Continuous Buzzing Sound When User Accidentally Touches Metal Rather Than Stone..
Simple Calibration For Stones Of Various Sizes..
This Tester Comes With A Pu Case And Small Testing Platform For Holding Loose Stones..
Features
- This diamond tester has a highly compact design and will help you to tell the difference between a genuine diamond and fake diamond.
- This tester comes with a PU case and small testing platform for holding loose stones.
- LED light and audio result indication.
- Simple calibration for stones of various sizes.
- Green indicator will be showed if the stone is a real diamond. It will make continuous buzzing sound when user accidentally touches metal rather than stone.
- See more on Amazon...
Brand: Generic
See On Amazon #17
Test Leads Kit,Electrical Test Cable Wire 4mm Banana Plug with Alligator Crocodile Clips Test Fork for Multimeter
Asin: B0D28F26C9 | Ean: 0658361487543 | UPC: 658361487543
Features
- WIDE APPLICATION: Our Automotive Test Leads Set not only for Automotive Diagnostics, Testing, and Repairing, but is also used in Physics Laboratories, Service Shops, Schools, Homes, and Industries. Probes can easily insert into automotive connectors and use on harness connectors, fuel injectors, and automotive sensors.
- See more on Amazon...
Brand: Col-Pary | Manufacturer: Col-Pary
Dimensions: 1.38 x 9.06 x 4.72 Inches
See On Amazon #18
Multimeter Leads Kit, Back Probe Kit, 4mm Banana Plug with Alligator Clip Test Wires,Wire Piercing Probes, Automotive Test Leads Set for Car Repairing Diagnostic Circuit Testing
Asin: B0D25XV5PD | Ean: 0658361487529 | UPC: 658361487529
Features
- WIDE APPLICATION: Our Automotive Test Leads Set not only for Automotive Diagnostics, Testing, and Repairing, but is also used in Physics Laboratories, Service Shops, Schools, Homes, and Industries. Probes can easily insert into automotive connectors and use on harness connectors, fuel injectors, and automotive sensors.
- See more on Amazon...
Brand: Col-Pary | Manufacturer: Col-Pary
Dimensions: 7.87 x 3.94 x 1.38 Inches
See On Amazon #19
4mm Stackable Banana to Banana Plug,Test Leads Kit with Full Insulated Copper Alligator Crocodile Clips for Multimeter Electrical Testing -10PCS 5 Colors
Asin: B0D28NSDWD | Ean: 0658361487550 | UPC: 658361487550
Features
- WIDE APPLICATION: Our Automotive Test Leads Set not only for Automotive Diagnostics, Testing, and Repairing, but is also used in Physics Laboratories, Service Shops, Schools, Homes, and Industries. Probes can easily insert into automotive connectors and use on harness connectors, fuel injectors, and automotive sensors.
- See more on Amazon...
Brand: Col-Pary | Manufacturer: Col-Pary
Dimensions: 1.57 x 9.06 x 4.72 Inches
See On Amazon #20
Multimeter Leads Kit, Professional Test Leads Set with Replaceable Multimeter Probes, Alligator Clips, Spade Plugs, Test Hooks and Banana Plug
Asin: B0D25V8T6W | Ean: 0658361487512 | UPC: 658361487512
Features
- Multifunction: Test clips, replaceable banana plugs, alligator clips, spade plugs, wire piercing probes and replaceable probes can be used in different measurement environments such as industrial, electronics, home and automotive.
- See more on Amazon...
Brand: Col-Pary | Manufacturer: Col-Pary
See On Amazon #21
New Voltage Reference Board AD584K 4 Channel Micro USB Programmable Benchmark Voltage Calibration Module DC5V for HP3458A 8 and A Half Digit Multimeter
Asin: B0D11X1TF7 | Model: AD584K | PartNumber: AD584K
Reference Module: Programmable 4 Channel Voltage Calibration Module, With Built In Charging Management, Loading And Unloading Protection, Ensuring Safe And Reliable Operation..
Micro Usb Interface: This Module Has Micro Usb Charging And Discharging Interface, With 2Mm Copper Test Socket, Easy To Insert Into A Multimeter To Measure Or Calibrate Other Instruments..
Output Voltage Setting: With Precise Reference Voltage Source, This Module Can Set 4 Commonly Used Output Voltages, Namely 10.0V, 7.50V, 5.00V, And 2.50V, With A Wide Range Of Applications..
With Indicator Light: The Voltage Calibration Board Is Equipped With Indicator Light. Press And Hold For 2 Seconds Before Turning On.After Turning On, All 4 Indicators Will Light Up Simultaneously..
Features
- Multimeter Calibration: Use for HP3458A 8 and a half digit multimeter for calibration (use after sufficient preheating), with a calibration value of 6 and a half digit counting, accurate and reliable.
- With Indicator Light: The voltage calibration board is equipped with indicator light. Press and hold for 2 seconds before turning on.After turning on, all 4 indicators will light up simultaneously.
- Reference Module: Programmable 4 channel voltage calibration module, with built in charging management, loading and unloading protection, ensuring safe and reliable operation.
- Output Voltage Setting: With precise reference voltage source, this module can set 4 commonly used output voltages, namely 10.0V, 7.50V, 5.00V, and 2.50V, with a wide range of applications.
- Micro USB Interface: This module has Micro USB charging and discharging interface, with 2mm copper test socket, easy to insert into a multimeter to measure or calibrate other instruments.
- See more on Amazon...
Brand: Generic | Manufacturer: e-cheng
See On Amazon #22
2mm Piercing Needle Non-Destructive Test Probe Use for fluke Digital Multimeter Test Leads TL71 TL75
Asin: B0CWDZ6YC8
A Sharp Point Ensures Good Contact To The Electrical Connector.
Fit For Fluke Multimeters And Fluke Test Leads Tl71 Tl75.
Probes Are Made Of Stainless Steel Which Have Strong Conductivity. The Shell Is Made Of Insulating And Flame-Retardant Material Which Ensures Your Safety During Testing..
Cat Ii 300V/3A.
Features
- This test probes is suitable to be inserted into a 2mm connector, and the end connector can be inserted into a 2mm banana connector.
- CAT II 300V/3A
- A Sharp Point Ensures Good Contact To the Electrical Connector
- Probes are made of stainless steel which have strong conductivity. The shell is made of insulating and flame-retardant material which ensures your safety during testing.
- Fit for fluke multimeters and fluke test leads tl71 tl75
- See more on Amazon...
Brand: Dpttmlaci | Manufacturer: Dpttmlaci
Dimensions: 1.18 x 3.94 x 3.94 inches
See On Amazon #23
testo Smart Probe Kit I HVAC/R Test and Load Set for air Conditioning, Refrigeration and Heating System I Includes testo 115i, 549i and 605i with Bluetooth
Asin: B07T36CTT2 | Model: 0563 0009 | PartNumber: 0563 0009 | Ean: 4029547022456
Testo 115I: With A Grip Of Up To 1.5”, The Wireless Thermometer Provides Quick And Reliable Temperature And Flow And Return Temperature Measurements Of Pipes.
Smart App: The Free Testo Smart Probes App Is A Powerful Tool That Allows You To Remotely Read And Log Measurements And Create Custom Reports Which Can Be Saved And Shared.
Testo 549I: The Pressure Meter Enables Accurate Readings For High And Low Pressure. The 45-Degree Connector Simplifies Servicing And Troubleshooting – Without The Need For Hoses.
Testo 605I: The Thermohygrometer Is Equipped With A Bendable Probe Head And Thus Achieves Remote Temperature Measurements In Rooms, Ducts, Crawl Spaces And Registers.
Features
- Efficient: The testo smart probe set offers precise measurements and calculations for heating and cooling systems, making it ideal for all HVAC/R contractors and technicians
- Testo 605i: The thermohygrometer is equipped with a bendable probe head and thus achieves remote temperature measurements in rooms, ducts, crawl spaces and registers
- Testo 115i: With a grip of up to 1.5 , the wireless thermometer provides quick and reliable temperature and flow and return temperature measurements of pipes
- Testo 549i: The pressure meter enables accurate readings for high and low pressure. The 45-degree connector simplifies servicing and troubleshooting without the need for hoses
- Smart App: The free testo Smart Probes App is a powerful tool that allows you to remotely read and log measurements and create custom reports which can be saved and shared
- See more on Amazon...
Brand: Testo | Manufacturer: Testo
Dimensions: 3.82 x 17.17 x 13.35 inches | Weight: 1.00 pounds
See On Amazon #24
PerfectPrime TL1813 Sensor Metal HeadProbe for K-Type Probe Thermocouple Sensor & Meter in Temperature Range from 0 to 1000 C
Asin: B0142SDKC0 | Model: COMINHKPR124219 | PartNumber: COMINHKPR124219 | Ean: 0638414476397 | UPC: 638414476397
Item Include : 1 X Metal Probe.
Flat Shape Male Connector.
Probe For K-Type Thermocouple Meter.
M8*1-3 *10 Cm Metal Head Armoured Cable, 150Cm Long, K-Type Thermocouple Probe.
Features
- Operating temperature: 0 to 1000 C / 1832 F
- M8*1-3 *10 cm Metal Head Armoured Cable, 150cm long, K-Type Thermocouple Probe
- Item include : 1 x Metal Probe
- Probe for K-Type Thermocouple Meter
- Flat Shape Male Connector
- See more on Amazon...
Brand: PerfectPrime | Manufacturer: PerfectPrime
Dimensions: 10.50 x 0.50 x 5.00 Inches
See On Amazon #25
Bartol Mag-Probe 2002096 High Sensitivity Noncontact Probe
Asin: B00PQZVSZA | Model: 2002096 | PartNumber: 2002096
Brand: Bartol Mag-Probe.
Manufacturer Number: Prx+10300.
Model: Hs.
Qty/Ea: 1.
Features
- Product Type: magnetic sensing instrument
- Qty/ea: 1
- Brand: bartol mag-probe
- Model: HS
- Manufacturer number: prx+10300
- See more on Amazon...
Brand: Bartol Mag-Probe | Manufacturer: Cole-Parmer
Dimensions: 8.00 x 6.00 x 4.00 Inches | Weight: 1.00 Pounds
See On Amazon #26
PerfectPrime TL0700, K-Type Sensor Probe for K-Type Thermocouple Thermometer/Meter in Temperature Range from -30 to 700 C/ 1292 F
Asin: B01MU29Q3Z | Model: COMINHKPR131550 | PartNumber: COMINHKPR131550 | Ean: 0638414477455 | UPC: 638414477455
Usa Thermocouple Sensor And Wire, Glass Braid Insulation.
Flat Shape Male Connector, Item Include : 1 X Probe.
Wire Diameter: 0.5 Mm X 2, Package Diameter: ~ 3 Mm.
100 Cm (1 Meter ) Long K-Type Thermocouple Probe.
Features
- Operating temperature: -30 to 700 C
- 100 cm (1 Meter ) long K-Type Thermocouple Probe
- USA Thermocouple Sensor and Wire, Glass Braid Insulation
- Wire Diameter: 0.5 mm x 2, Package Diameter: ~ 3 mm
- Flat Shape Male Connector, Item include : 1 x probe
- See more on Amazon...
Brand: PerfectPrime | Manufacturer: PerfectPrime
See On Amazon #27
Fluke - FLUKE-IR3000FC IR3000FC Infrared Connector for Connect
Asin: B00JJQ4KKM | Model: FLUKE-IR3000FC | PartNumber: FLUKE-IR3000FC | Ean: 0095969723855 | UPC: 095969723855
Allows Wireless Data Transfer To Iphone Or Android Smart Phone (Sold Separately).
Features
- Infrared connector for use with Fluke 189, 289, and 789 multimeters (sold separately)
- Allows wireless data transfer to iPhone or Android smart phone (sold separately)
- See more on Amazon...
Brand: Fluke | Manufacturer: Fluke
Dimensions: 2.52 x 4.80 x 4.09 Inches | Weight: 0.36 pounds
See On Amazon #28
Fluke T3000 FC Wireless K-Type Temperature Module
Asin: B00JJQ3XLO | Model: FLK-T3000 FC KIT | PartNumber: FLK-T3000 FC KIT | Ean: 0696335209661, 0095969692021 | UPC: 095969692021, 696335209661
Module Includes A T3000 Thermocouple Thermometer, 80Pk-1 K-Type Bead Thermocouple, And A Magnetic Hanging Strap.
Country Of Origin: United States.
Works As A Standalone Meter Or With The Following (Sold Separately): Fluke 3000 Fc Dmm, Fluke Ti200/300/400 Infrared Cameras, Pc With Fluke Pc3000 Adapter, And Fluke Connect Mobile App.
Features
- Wireless module with thermocouple thermometer and K-type bead thermocouple has a range of -200 to +1,372 degrees C, and can wirelessly relay measurements to Fluke Connect enabled master units
- Works as a standalone meter or with the following (sold separately): Fluke 3000 FC DMM, Fluke Ti200/300/400 Infrared Cameras, PC with Fluke pc3000 Adapter, and Fluke Connect Mobile app
- Module includes a T3000 thermocouple thermometer, 80PK-1 K-type bead thermocouple, and a magnetic hanging strap
- Country of origin: United States
- See more on Amazon...
Brand: Fluke | Manufacturer: Fluke
Weight: 0.49 pounds
Warranty: 3 Years
See On Amazon #29
Fluke BP880 BNC to Female Double Stacking Banana Plug, Nickel-Plated Finish, 122 Degree F Temperature
Asin: B000VRECB0 | Model: BP880 | PartNumber: BP880 | Ean: 0095969261463, 0783961332860 | UPC: 783961332860, 095969261463
The Bnc Shell Is Plated For Tarnish Resistance.
Banana Plug Is Nickel-Plated, Beryllium Copper For Low Contact Resistance.
Allows For Hands-Free Testing In Controlled Voltage Environments 500V Rms Maximum.
Converts A Bnc Scope Lead To A Dual Banana Plug For Connection To A Dmm.
Features
- BNC to female double stacking banana plug
- Converts a BNC scope lead to a dual banana plug for connection to a DMM
- The BNC shell is plated for tarnish resistance
- Allows for hands-free testing in controlled voltage environments 500V RMS maximum
- Banana plug is nickel-plated, beryllium copper for low contact resistance
- See more on Amazon...
Brand: Fluke | Manufacturer: Fluke Corporation
Dimensions: 0.30 x 4.80 x 3.70 Inches | Weight: 0.05 pounds
See On Amazon #30
FLIR TA72 Universal Flex Current Probe Accessory, 10 Inch
Asin: B01066Q15U | Model: TA72 | PartNumber: TA72 | Ean: 0793950377727 | UPC: 793950377727
Ac Voltage Probe Output For Wider Compatibility.
Switchable Ac Current Range: 30 A, 300 A, 3000 A.
Standard Banana Plug Cables Fit Most Meters.
Convenient 25 Cm (10") Flexible Clamp With Locking Mechanism.
Features
- Adds 3000 A AC current measurements to existing meters
- Convenient 25 cm (10) flexible clamp with locking mechanism
- AC voltage probe output for wider compatibility
- Standard banana plug cables fit most meters
- Switchable AC current range: 30 A, 300 A, 3000 A
- See more on Amazon...
Brand: FLIR | Manufacturer: FLIR Systems, Inc.
Dimensions: 11.00 x 4.70 x 1.00 Inches | Weight: 0.79 Pounds
See On Amazon
Looking For Something Else?
Search