Best knobs & hand wheels - Buying Guide
Last Updated: 05/04/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
Mozeat Lens 10 Pack 6 Star Knobs 1/4 Inch 20 Female Threaded Hexagon Head Thru Knob Clamping Knobs Jig Knobs T Knob
Asin: B0CFKZXVHX | Model: 554350_1_30NW6epDQ | PartNumber: 554350_1_30NW6epDQ
Female Thread Size: T Track Knob Threading Is 1/4 Inch In Diameter , Suitable For 1/4-20 Rod..
Wide Application: The Screw-On Clamping Knobs Fit For Routing Jig, Saw Fence, Drill Press, Lathe, Fixture Which Requires A 1/4-Inch 20 Female Thread..
Handy Design: The Bolt Can Go All The Way Through The Tightening Knob, And Stick Out The Top To Give Plenty Of Adjustment Range, Which Is Handy When The Screw Happens To Be Longer Than You Need It To Be..
Easy To Use: The Star Knobs Work Great As A Holding Jig, Holds Steady And Requires Little Effort To Loosen And Tighten Back Up..
Features
- Well Made: Each 1/4-20 knob has a brass insert that molded in a plastic knob. The thru knobs have enough threads that are intended to thread on a bolt to clamp them together.
- Easy to Use: The star knobs work great as a holding jig, holds steady and requires little effort to loosen and tighten back up.
- Female Thread Size: T track knob threading is 1/4 inch in diameter , suitable for 1/4-20 rod.
- Handy Design: The bolt can go all the way through the tightening knob, and stick out the top to give plenty of adjustment range, which is handy when the screw happens to be longer than you need it to be.
- Wide Application: The screw-on clamping knobs fit for routing jig, saw fence, drill press, lathe, fixture which requires a 1/4-Inch 20 female thread.
- See more on Amazon...
Brand: Mozeat Lens | Manufacturer: MOZEAT LENS
Dimensions: 1.20 x 1.20 x 1.20 Inches | Weight: 0.07 Pounds
See On Amazon #2
Aifeier ET 4 Pcs 1/4"-20 Inch Knob Black Nylon Screw-On Type Thru Threaded Knob Nuts 6-Star Shape Hand Tighten Clamping Knobs
Asin: B0C7GN5584
【Size】Female Thread Type: 1/4"-20; Head Diameter: 1.26 Inch/32Mm; Total Height: 0.51 Inch/13Mm..
【Package Included】4 × 1/4"-20 Star Knob Handle. Color: Black;.
【Application】Widely Used For Lathe Machine, Mechanical Equipment, Instrument And Apparatus, Food And Pharmaceutical Industry Equipment. It Can Be Used In Drill Press, Lathes, Fixture, Feather Board And Fences, And Other Places Where 1/4 Inch Female Thread Is Needed..
【Easy To Control】Star Shaped Design, Well-Made, Accord To Ergonomic, Comfortable Hand Grip And Non-Slip Without Scratching Hands..
Features
- Premium Material Made of high quality nylon and galvanized carbon steel, reliable, good toughness, strong anti-aging ability, smooth and beautiful, long service life.
- Easy to Control Star shaped design, well-made, accord to ergonomic, comfortable hand grip and non-slip without scratching hands.
- Size Female thread type: 1/4-20; Head diameter: 1.26 inch/32mm; Total height: 0.51 inch/13mm.
- Application Widely used for lathe machine, mechanical equipment, instrument and apparatus, food and pharmaceutical industry equipment. It can be used in drill press, lathes, fixture, feather board and fences, and other places where 1/4 inch female thread is needed.
- Package Included 4 1/4-20 Star Knob Handle. Color: Black;
- See more on Amazon...
Brand: Aifeier ET | Manufacturer: Aifeier ET
Dimensions: 0.51 x 1.22 x 1.22 inches | Weight: 0.01 Pounds
See On Amazon #3
Haobase 5pcs M6 X 32 mm Female Threaded 7 Lobes Through Hole Set-Up Knob Grip Black
Asin: B07RW9ZH4H | Ean: 0028753375831 | UPC: 028753375831
Main Color: Black; Head Diameter: Star M: 32 Mm.
Total Height: 23 Mm.
Inner Thread Diameter Meter: M6.
Product Name: Clamping Knob; Weight: 50 Grams.
Features
- Main Material: Plastic, Metallic; Package Content: 5 Clamping Range Knob
- Product Name: Clamping Knob; Weight: 50 grams
- Main Color: Black; Head Diameter: Star M: 32 mm
- Inner Thread Diameter meter: M6
- Total height: 23 mm
- See more on Amazon...
Brand: Haobase | Manufacturer: Haobase
Dimensions: 0.87 x 1.18 x 1.18 inches | Weight: 0.14 Pounds
See On Amazon #4
20 Pack 1/4-20 Knob 6 Star Knobs 1/4 Inch 20 Female Threaded Hexagon Head Thru Knob Clamping Knobs Jig Knobs T Track Bolts
Asin: B0CQ2NWC2C | Model: 554350_3_VNKWeQdRd | PartNumber: 554350_3_VNKWeQdRd
Female Thread Size: T Track Knob Threading Is 1/4 Inch In Diameter , Suitable For 1/4-20 Rod..
Wide Application: The Screw-On Clamping Knobs Fit For Routing Jig, Saw Fence, Drill Press, Lathe, Fixture Which Requires A 1/4-Inch 20 Female Thread..
Handy Design: The Bolt Can Go All The Way Through The Tightening Knob, And Stick Out The Top To Give Plenty Of Adjustment Range, Which Is Handy When The Screw Happens To Be Longer Than You Need It To Be..
Easy To Use: The Star Knobs Work Great As A Holding Jig, Holds Steady And Requires Little Effort To Loosen And Tighten Back Up..
Features
- Well Made: Each 1/4-20 knob has a brass insert that molded in a plastic knob. The thru knobs have enough threads that are intended to thread on a bolt to clamp them together.
- Easy to Use: The star knobs work great as a holding jig, holds steady and requires little effort to loosen and tighten back up.
- Female Thread Size: T track knob threading is 1/4 inch in diameter , suitable for 1/4-20 rod.
- Handy Design: The bolt can go all the way through the tightening knob, and stick out the top to give plenty of adjustment range, which is handy when the screw happens to be longer than you need it to be.
- Wide Application: The screw-on clamping knobs fit for routing jig, saw fence, drill press, lathe, fixture which requires a 1/4-Inch 20 female thread.
- See more on Amazon...
Brand: Mozeat Lens | Manufacturer: MOZEAT LENS
See On Amazon #5
Rrina 8 Sets M6 7 Star Through Hole Knob Nut Screw Clamping Knurled Threaded Knob Assortment Kit, Black Nylon Star Shape Hand Knobs
Asin: B0BZNSB4NZ | Ean: 0754525045465 | UPC: 754525045465
Suitable For: Used For Mechanical Equipment, Instruments, Drilling Machines, Lathes, Wiring Fixtures, Etc..
Note: Please Confirm Whether Size Is Appropriate Before Placing The Order..
Easy To Use, Can Be Installed And Removed By Hand, Very Convenient..
Packing Quantity: 8Pcs Knob Nuts; 4Pcs M6x60 Screws; 4Pcs M6x80 Screws; 8Pcs Nuts; 4Pcs T-Nuts(2020); 2Pcs T-Nuts(3030); 2Pcs T-Nuts(4040)..
Features
- MATERIAL: Knob made of high-quality nylon female thread knurled brass, screw made of 304 Stainless Steel.
- PACKING QUANTITY: 8Pcs knob nuts; 4Pcs M6x60 screws; 4Pcs M6x80 screws; 8Pcs nuts; 4Pcs T-Nuts(2020); 2Pcs T-Nuts(3030); 2Pcs T-Nuts(4040).
- SUITABLE FOR: Used for mechanical equipment, instruments, drilling machines, lathes, wiring fixtures, etc.
- Easy to use, can be installed and removed by hand, very convenient.
- Note: Please confirm whether size is appropriate before placing the order.
- See more on Amazon...
Brand: Rrina | Manufacturer: Rrina
See On Amazon #6
GLIDESTORE M8 x 40mm Thread Replacement Star Hand Knob Tightening Screw Hand Tightening Knob Quick Removal Replacement Parts for Umbrella Base Replacement Knob (5-Pack)
Asin: B098SSKTZ9 | Ean: 0710827710197 | UPC: 710827710197
✔ Wide Application: Widely Used For Mechanical Equipments, Instruments, Apparatus, Food And Pharmaceutical Industry Equipments..
✔ Size: Total Length 65Mm, Size : 38.5 X 38.5 X 22Mm / 1.5" X 1.5" X 0.8" (L*W*T). Thread Length : 40Mm;Thread Diameter : M8 (8Mm).
✔ Easy To Use: These Screw Knob Replacements Are Easy To Tighten/Loosen And No Extra Tool Required. They Definitely Will Bring Great Convenience To Your Life.
✔ Material: This Product Is Made Of Plastic And Steel, Which Makes It Durable And Long-Lasting..
Features
- EXCELLENT CUSTOMER SERVICE: Customer satisfaction is our utmost priority. If you are dissatisfied with knob tightening screw , drop us a message and we are certain to give you a full refund.
- MATERIAL: This product is made of plastic and steel, which makes it durable and long-lasting.
- WIDE APPLICATION: Widely used for mechanical equipments, instruments, apparatus, food and pharmaceutical industry equipments.
- EASY TO USE: These screw knob replacements are easy to tighten/loosen and no extra tool required. They definitely will bring great convenience to your life
- Size: Total Length 65mm, Size : 38.5 x 38.5 x 22mm / 1.5 x 1.5 x 0.8 (L*W*T). Thread Length : 40mm;Thread Diameter : M8 (8mm)
- See more on Amazon...
Brand: GLIDESTORE | Manufacturer: GLIDESTORE
Dimensions: 0.01 x 1.57 x 1.57 Inches | Weight: 0.15 Pounds
See On Amazon #7
Rrina 0.47x4inch Diameter Round Hand Wheel W Revolving Knob Handle for Mill Drillpress Crank Lathe
Asin: B09MJDR45Y | Ean: 0721618133217 | UPC: 721618133217
Suitable For: Industrial Machine Tools, Such As Milling Machines, Lathes, Grinders, And Medical Equipment, Etc..
Note: Please Confirm Whether The Size Is Appropriate Before Placing The Order..
Size: Diameter Of Hole In Hand Wheel 0.47In/12Mm, Fixing Thread Hole Size M6, Diameter Of Handwheel 4In, Hand Wheel Total Height: 46Mm / 1.81"; Handle Size: 22Mm/0.88" X 64Mm/2.51"(Max.D X L), Handle Thread Diameter: M8; Handle Thread Length: 14Mm/0.55"..
Packing Quantity: This Hand Wheel Set Includes: 1 X Main Revolving Handwheel, 1 X Handle Grip(Knob), M6 Mounting Screws 2Pcs, Wrench 2Pcs..
Features
- MATERIAL: Made of high quality plastic, modern-design, strong insulation and durable in use.
- PACKING QUANTITY: This hand wheel set includes: 1 x main revolving handwheel, 1 x handle grip(Knob), M6 mounting screws 2Pcs, wrench 2Pcs.
- SUITABLE FOR: Industrial machine tools, such as milling machines, lathes, grinders, and medical equipment, etc.
- SIZE: Diameter of hole in hand wheel 0.47in/12mm, fixing thread hole size M6, diameter of handwheel 4in, hand wheel Total Height: 46mm / 1.81; handle Size: 22mm/0.88 x 64mm/2.51(Max.D x L), handle thread diameter: M8; handle thread length: 14mm/0.55.
- Note: Please confirm whether the size is appropriate before placing the order.
- See more on Amazon...
Brand: Rrina | Manufacturer: Rrina
Dimensions: 0.01 x 4.00 x 0.47 inches | Weight: 0.51 Pounds
See On Amazon #8
DCT 5 Star Knobs 5/16in-18 Internal Threaded Knob Clamping Knob Jig Knobs T Knob Plastic Knobs, Threaded Knobs 5-Pack
Asin: B07JPB8YCT | Model: 8709 | PartNumber: 8709 | Ean: 0811498038709 | UPC: 811498038709
Turn Comfortably: Ergonomic Design Of This Plastic Knob Set Allows For Easy Adjustment And Tightening With Maximum Control And Agility Without The Use Of Additional Tools.
Package Contents: Tightening Knob Package Includes (5) T Track Knobs (5/16”-18) For Your Convenience; For Use With Tee Bolts And A Hold Down Clamp (Sold Separately).
Built To Last: T Knobs Constructed From Polypropylene Plastic With A Molded-In Brass Insert That Will Not Strip.
Perfect Size: 2-Inch Diameter And 1-Inch Height (5.1Cm X 2.5Cm); T Track Knob Threading Has 5/16-Inch (7.9Mm) Diameter And 18 Threads Per Inch (If You Turn A Nut 18 Revolutions It Will Move 1 Inch).
Features
- TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs 5-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch 18 internal thread is required
- PERFECT SIZE: 2-inch diameter and 1-inch height (5.1cm x 2.5cm); T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch)
- TURN COMFORTABLY: Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools
- BUILT TO LAST: T knobs constructed from polypropylene plastic with a molded-in brass insert that will not strip
- PACKAGE CONTENTS: Tightening knob package includes (5) T track knobs (5/16 -18) for your convenience; For use with tee bolts and a hold down clamp (sold separately)
- See more on Amazon...
Brand: Deadwood Crafted Tools | Manufacturer: Deadwood Crafted Tools
Dimensions: 1.25 x 5.00 x 3.75 inches | Weight: 0.13 Pounds
Warranty: This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.
See On Amazon #9
METALLIXITY Clamping Handle Screw Knobs (M8x47mm) 2Pcs, Metal Tapered Grip - for Housing Construction, Lathe Machine, Industry Equipment
Asin: B0B8V9K96N | Model: mtf220523xt0141 | PartNumber: mtf220523xt0141
[3]:Design - Tapered Shape Design, It Is Non-Slip And More Comfortable To Use..
[5]:Quantity Included - 2Pcs X Clamping Handle Screw Knobs.
[4]:Advantage - Made Of Metal Material, It Has Good Hardness And Can Be Fastened For A Long Time..
[2]:Specification - Handle Height: 56Mm/2.2"; Head Dia: 19Mm/0.75"; Thread Size: M8x47mm (D*L); Total Height: 75Mm/3''; Thread Pitch: 1.25Mm.
Features
- [1]:APPLY TO - Can be used in housing construction, furniture repair, lathe machine, clamp, fence, mechanical equipment, instrument and apparatus, and industrial equipment.
- [2]:SPECIFICATION - Handle Height: 56mm/2.2; Head Dia: 19mm/0.75; Thread Size: M8x47mm (D*L); Total Height: 75mm/3''; Thread Pitch: 1.25mm
- [3]:DESIGN - Tapered shape design, it is non-slip and more comfortable to use.
- [4]:ADVANTAGE - Made of metal material, it has good hardness and can be fastened for a long time.
- [5]:QUANTITY INCLUDED - 2pcs x Clamping Handle Screw Knobs
- See more on Amazon...
Brand: METALLIXITY | Manufacturer: METALLIXITY
Dimensions: 0.01 x 1.85 x 0.31 Inches | Weight: 0.16 Pounds
See On Amazon #10
SB Distribution Ltd. SBDs Black Phenolic ABS Plastic Ball Knob Female | 3/8"- 16 Thread Pitch 15/16" Depth 1-3/8" Diameter |1-1/2" Height w/Brass Coated Metal Insert Heavy Duty 1.02 Oz
Asin: B07MTJLJZS | Model: SB-P180A-3/8"-13 | PartNumber: SB-P180A-3/8"-13
**An Excellent Choice For User Friendly Applications Tapped Insert: Brass, Molded In Plastic Ball Knobs Can Be Used On Machine Tools, Jigs, Fixtures, And A Variety Of Other Equipment.**.
**Alert – Please See The Description And Measurements Provided In The Images Before Ordering The Product.**.
**Highly Recommended For Fitness Equipment Weight Stack Select Pins / Keys**.
**No Parting Lines, Flash Removed & Polished**.
Features
- SBDs Black Phenolic ABS Plastic Ball Knob Female | 3/8"- 16 Thread Pitch 15/16" depth 1-3/8" Diameter, 1-1/2" Height w/Brass coated metal Insert Heavy Duty 1.02 Oz
- **No parting lines, flash removed & polished**
- **An excellent choice for user friendly applications Tapped insert: Brass, molded in Plastic ball knobs can be used on machine tools, jigs, fixtures, and a variety of other equipment.**
- **Highly recommended for Fitness Equipment Weight Stack Select PINS / KEYS**
- **ALERT Please see the description and measurements provided in the images before ordering the product.**
- See more on Amazon...
Brand: SB Distribution Ltd. | Manufacturer: SB Distribution Ltd.
Dimensions: 1.50 x 1.50 x 1.50 inches | Weight: 0.06 Pounds
See On Amazon #11
Aifeier ET 4 Pieces 5/16"-18 Female Thread 5 Star Knobs Nylon Clamping Knob Jig Knobs
Asin: B0CMQKRHC9 | Model: STAR-KNOBHANDLE-516-4P | PartNumber: STAR-KNOBHANDLE-516-4P
【Easy To Control】The Clamping Screw Knob Adopts A Special Star Design, Well-Made, Ergonomic, Comfortable To Hold, And Provides Ideal Grip, So That You Have Better Control And Precision..
【Package Included】4 × 5/16"-18 Star Knob Handle. Color: Black..
【Application】T Track Knobs Are Widely Used For Replacements, Accessories, Jigs And Fixtures, Etc. It Can Be Used In Drill Press, Lathes, Fixture, Feather Board And Fences, And Other Places Where 5/16 Inch 18 Male Thread Is Needed..
【Premium Material】T Knob Is Made Of Polypropylene Plastic And Brass Inserts, Durable, Good Toughness, Strong Anti-Aging Ability, Smooth And Beautiful, Long Service Life..
Features
- Perfect Size Female thread specification: 5/16"-18; Thread diameter: 5/16"(7.9mm); Head diameter: 2"(51mm); Total height: 0.75"(19mm).
- Premium Material T knob is made of polypropylene plastic and brass inserts, durable, good toughness, strong anti-aging ability, smooth and beautiful, long service life.
- Easy to Control The clamping screw knob adopts a special star design, well-made, ergonomic, comfortable to hold, and provides ideal grip, so that you have better control and precision.
- Application T track knobs are widely used for replacements, accessories, jigs and fixtures, etc. It can be used in drill press, lathes, fixture, feather board and fences, and other places where 5/16 inch 18 male thread is needed.
- Package Included 4 5/16-18 Star Knob Handle. Color: Black.
- See more on Amazon...
Brand: Aifeier ET | Manufacturer: Aifeier ET
Dimensions: 2.00 x 2.00 x 2.00 Inches
See On Amazon #12
DimcoGray Phenolic Knob Black Plastic Threaded Ball Knob, Round Threaded Knob. Brass Insert: 5/16-24" Thread Size with 4/8" Thread Length. Knob Diameter: 1 3/8" - Female Plastic Ball Knob (1 Each)
Asin: B002DGA4UU
Black Plastic Knob Handles Made Of High Quality Phenolic Plastic For Durability And Long Service Life.
Black Plastic Round Ball Knob Handle Make It An Ideal Replacement Knob For Lever Handles And Industrial Heavy Duty Applications.
Threaded Brass Insert Make It An Ideal Lever Knob For Machine Handles.
The Round Smooth Surface Gives A Dressed-Up Finished Appearance..
Features
- Phenolic Round Ball Knob has a 1 3/8" inch diameter and a female thread depth of 4/8" The thread size is 5/16-24"
- The round smooth surface gives a dressed-up finished appearance.
- black plastic knob handles made of high quality phenolic plastic for durability and long service life
- Threaded brass insert make it an ideal lever knob for machine handles
- Black Plastic Round Ball Knob Handle make it an ideal replacement knob for lever handles and industrial heavy duty applications
- See more on Amazon...
Brand: DimcoGray | Manufacturer: Reid Supply Company
Weight: 0.09 Pounds
See On Amazon #13
Hamineler 30 Sets M4 M5 M6 M8 Stainless Steel Hex Shaped Metal Clamping Hand Star Knobs with Nuts and Flat Washer Assortment Kit, Quick Removal Clamping Screw Knob Star Knobs
Asin: B09FYXV9GF | Ean: 0712004455815 | UPC: 712004455815
Metric Thread, Thread Pitch: M8 X 1.25Mm, M6 X 1.0Mm, M5 X 0.8Mm, M4 X 0.7Mm..
This Plastic Hand Knob Screw Is Easy To Install And Remove And Does Not Require Any Tools.Widely Used In Furniture Decoration, Electronic Equipment, Mechanical Equipment And Other Related Industries.
The Head Is Made Of High-Quality Plastic Material, Which Has Good Toughness And Strong Anti-Aging Ability. The Screws Are Made Of Stainless Steel.
Thread Size:M8 X 50Mm, M6 X 40Mm, M5 X 30Mm, M4 X 20Mm..
Features
- Material: Stainless steel, Plastic.
- Thread Size:M8 x 50mm, M6 x 40mm, M5 x 30mm, M4 x 20mm.
- Metric thread, Thread Pitch: M8 x 1.25mm, M6 x 1.0mm, M5 x 0.8mm, M4 x 0.7mm.
- The head is made of high-quality plastic material, which has good toughness and strong anti-aging ability. The screws are made of stainless steel
- This Plastic Hand Knob Screw is easy to install and remove and does not require any tools.Widely used in furniture decoration, electronic equipment, mechanical equipment and other related industries
- See more on Amazon...
Brand: Hamineler | Manufacturer: Hamineler
See On Amazon #14
Jingzan 2 Pack 0.47x4inch Diameter Round Hand Wheel Three-Spoke W Revolving Knob Handle for Mill Drillpress Crank Lathe
Asin: B0CC895SJJ | Model: DP221 | PartNumber: DP221
【Package Included】: 2 X Main Revolving Handwheel, 2 X Handle Grip(Knob), M6 Mounting Screws 4Pcs, Wrench 4Pcs..
【Easy To Use】Design With Rotary Handle, Handwheel With Threaded Hole For Easy To Assemble Handle. Hand Wheels Are Ideal For Any Application Where General Or Precise Adjustments Need To Be Made Via A Turning Mechanism..
【Dimensions】: Diameter Of Hole In Hand Wheel 0.47In/12Mm, Fixing Thread Hole Size M6, Diameter Of Handwheel 4In, Hand Wheel Total Height: 47Mm / 1.8"; Handle Size: 22Mm/0.88" X 63Mm/2.51"(Max.D X L), Handle Thread Diameter: M8; Handle Thread Length: 13Mm/0.51"..
【A Versatile And Essential Hand Wheel】 A Great Component In Machinery And Equipment, Enabling Manual Control And Adjustment In Industrial And Workshop Settings. Widely Used Industrial Machine Tools, Such As Milling Machines, Lathes, Grinders, And Medical Equipment, Etc.Handwheel Is Good For Any Application Where General Or Precise Adjustments Need To Be Made A Turning Mechanism..
Features
- Quality Material : Made of high quality plastic, modern-design, strong insulation and durable in use. allowing for easy gripping and rotation. The circular shape provides a comfortable grip and facilitates smooth operation.
- A versatile and essential hand wheel a great component in machinery and equipment, enabling manual control and adjustment in industrial and workshop settings. Widely used Industrial machine tools, such as milling machines, lathes, grinders, and medical equipment, etc.Handwheel is good for any application where general or precise adjustments need to be made a turning mechanism.
- Package Included : 2 x main revolving handwheel, 2 x handle grip(Knob), M6 mounting screws 4Pcs, wrench 4Pcs.
- Dimensions : Diameter of hole in hand wheel 0.47in/12mm, fixing thread hole size M6, diameter of handwheel 4in, hand wheel Total Height: 47mm / 1.8; handle Size: 22mm/0.88 x 63mm/2.51(Max.D x L), handle thread diameter: M8; handle thread length: 13mm/0.51.
- Easy to Use Design with rotary handle, handwheel with threaded hole for easy to assemble handle. Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism.
- See more on Amazon...
Brand: Jingzan | Manufacturer: Jingzan
Dimensions: 4.00 x 4.00 x 4.00 Inches | Weight: 1.10 Pounds
See On Amazon #15
Carbon Steel Threaded Knurled Thumbscrew Screw on Knobs Grips Black Round Clamping Screw, Black (30 Pieces, 4 x 10 mm)
Asin: B09HGP7CTH | Model: Hotop-Carbon Steel-32 | PartNumber: Hotop-Carbon Steel-32
Nice Craftsmanship: The Surface Of The Grip Thumb Screw On Type Round Head Is Smooth, The Thread Is Neat And Uniform, Without Burrs, Making The Installation Effect More Tight.
Warm Notice: It Is Recommended That You Need Washers As Gaskets When Installing Some Monitors To Prevent Affect To The Computer Monitor; The Length Of The Screw Part Is 10 Mm, Which May Bottom Out On Some Computer Monitors; You Just Need A Layer Of Buffer To Prevent Direct Contact In Some Cases.
Easy To Install: The Grip Knob Thumb Screw Adopts A Screw-In Design, Which Is Easy To Install; The Surface Is Smooth And Clean, Making You Feel More Comfortable To Hold And Store.
Quality Material: The Male Thread Knurled Clamping Knobs Are Made Of Quality Carbon Steel, With Good Hardness, Strength, Corrosion Resistance And Wear Resistance; It Is A Fastening Accessory That Can Be Applied For A Long Time And Could Be Reusable For Most Different Purposes.
Features
- Ample quantity: you will receive 30 pieces 4mm x 10 mm threaded knurled thumbscrews, which can be installed in any place you need, and meet your daily use and replacement
- Quality material: the male thread knurled clamping knobs are made of quality carbon steel, with good hardness, strength, corrosion resistance and wear resistance; It is a fastening accessory that can be applied for a long time and could be reusable for most different purposes
- Nice craftsmanship: the surface of the grip thumb screw on type round head is smooth, the thread is neat and uniform, without burrs, making the installation effect more tight
- Easy to install: the grip knob thumb screw adopts a screw-in design, which is easy to install; The surface is smooth and clean, making you feel more comfortable to hold and store
- Warm notice: it is recommended that you need washers as gaskets when installing some monitors to prevent affect to the computer monitor; The length of the screw part is 10 mm, which may bottom out on some computer monitors; You just need a layer of buffer to prevent direct contact in some cases
- See more on Amazon...
Brand: Hotop | Manufacturer: Hotop
Weight: 0.02 Pounds
See On Amazon #16
OCR 10Pcs M6 7 Star Knob Knurled Thread Clamping Knob, Star Shape Hand Knobs Black Plastic Screw-On Clamping Star Knob Handle
Asin: B07DFF27H8 | Model: US_KNOB111 | PartNumber: US_KNOB111
【Non-Slip】Accord To Ergonomic, Designs A Comfortable Hand Grip And Non-Slip Without Scratching Hands..
【Application】Widely Used For Mechanical Equipment, Can Be Used On Saw Fence, Drill Press, Lathe, Routing Jig, Fixture, Feather Board, Or Anywhere Else That A M6 Knurled Thread Is Required..
【Easy Control】Star Shape Design For Easy Adjustment And Tightening With Maximum Control And Agility Without The Use Of Additional Tools..
【Material】Star Knob Handles Are Made Of High Quality Plastic And Metal For Durability And Long Service Life..
Features
- Features M6 star knob thread clamping knob plastic star shape knob handle for machine tool.
- Material Star Knob Handles are made of high quality plastic and metal for durability and long service life.
- Non-slip Accord to ergonomic, designs a comfortable hand grip and non-slip without scratching hands.
- Easy Control Star Shape design for easy adjustment and tightening with maximum control and agility without the use of additional tools.
- Application Widely used for mechanical equipment, can be used on saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a M6 knurled thread is required.
- See more on Amazon...
Brand: OCR | Manufacturer: OCR
Dimensions: 0.80 x 1.45 x 0.80 Inches | Weight: 0.10 Pounds
See On Amazon #17
E-outstanding 6-Star Knob 6PCS 1/4 Inch Nylon Hexagon Head Thru Knobs Clamping Knobs Jig Knobs Threaded Knob
Asin: B08DR5ZJ2S | Model: KNOBHHTK-6 | PartNumber: KNOBHHTK-6 | Ean: 0725983595472 | UPC: 725983595472
Suitable For Factory-Made Fixtures, Fixtures, Feather Boards And Fences, And Any Place Where 1/4 Inch 20 Female Threads Are Required..
Easy To Use, Can Be Installed And Removed By Hand, Very Convenient..
Made Of High-Quality Nylon And Stainless Steel, Good Toughness, Corrosion Resistance, Durable And A Long Service Life..
Colour: Black.Packing Includes: 6Pcs Thru Knobs..
Features
- Product Name: Hexagon Torx Nut.Diameter: 1/4".
- Colour: Black.Packing includes: 6PCS Thru Knobs.
- Suitable for factory-made fixtures, fixtures, feather boards and fences, and any place where 1/4 inch 20 female threads are required.
- Made of high-quality nylon and stainless steel, good toughness, corrosion resistance, durable and a long service life.
- Easy to use, can be installed and removed by hand, very convenient.
- See more on Amazon...
Brand: E-outstanding | Manufacturer: E-outstanding
See On Amazon #18
Bakelite Hand Wheel Bakelite Hand Wheel Machine Tool Hand Wheel Handle Back Corrugated Hand Wheel 80/100/160mm Corrugated Bakelite Handwheel Handle Assembly Handwheel
Asin: B0CLYJGZCD | Ean: 7593620138053
The Surface Of The Handwheel Is Carefully Polished, With Strong Gloss, Beautiful Appearance, Burr Elimination And Safe Use..
Designed For Industrial Machine Tools Such As Milling Machines, Lathes, And Grinders, Our Handwheel Is Suitable For Professionals And Diy Enthusiasts..
Improve Your Machine Operation With Our Bakelite Handwheel..
The Removable Revolving Handle And Screw Hole Make Handle Assembly Easy And Convenient..
Features
- Our versatile handwheel is suitable for various applications in workshops, factories, and manufacturing settings, providing reliable functionality.
- The removable revolving handle and screw hole make handle assembly easy and convenient.
- The surface of the handwheel is carefully polished, with strong gloss, beautiful appearance, burr elimination and safe use.
- Improve your machine operation with our bakelite handwheel.
- Designed for industrial machine tools such as milling machines, lathes, and grinders, our handwheel is suitable for professionals and DIY enthusiasts.
- See more on Amazon...
Brand: TONKBEEY | Manufacturer: TONKBEEY
See On Amazon #19
Feya Clamping Knob Jig Bo lt Hand Grip for Machinery and Equipment Lightweight 10pcs
Asin: B0D2RNVJBC | Model: Feya26qka1wypi | PartNumber: Feya26qka1wypi
[Heavy-Duty And Waterproof] Possess Strong Corro Sion Resistance, Waterproof, And Light In Weight. Suitable For Machinery And Equipment, Instrumentation, Food, And Industrial Equipment..
[Multi-Purpose Use] Versatile Clamping Knob Suitable For Various Applications, With The Screw Length Of 15Mm. Enhances Efficiency In Your Daily Tasks..
[Practical Design] The Straight Thread Head Locking Handle Is Exquisite And Non-Slip, Ensuring A Reliable Grip In Daily Use..
[Easy Installation] Screw On Type Design For Easy Installation With A Nice Finish For A Comfortable Grip. The Thread Rod Is Deep Ensuring A Good Tightening Effect..
Features
- [LIGHTWEIGHT AND COMPACT] The product is lightweight and convenient, compact and beautiful, suitable for multiple scenes. Made of excellent phenolic plastic material.
- [EASY INSTALLATION] Screw on type design for easy installation with a nice finish for a comfortable grip. The thread rod is deep ensuring a good tightening effect.
- [HEAVY-DUTY AND WATERPROOF] Possess strong corro sion resistance, waterproof, and light in weight. Suitable for machinery and equipment, instrumentation, food, and industrial equipment.
- [PRACTICAL DESIGN] The straight thread head locking handle is exquisite and non-slip, ensuring a reliable grip in daily use.
- [MULTI-PURPOSE USE] Versatile clamping knob suitable for various applications, with the screw length of 15mm. Enhances efficiency in your daily tasks.
- See more on Amazon...
Brand: Feya | Manufacturer: Feya
Dimensions: 1.97 x 3.94 x 1.97 inches
See On Amazon #20
SBTRKT Revolving Handle M6 M8 M10 M12 Plastic Metal Knob Male Threaded Stem Handwheel Screw Milling Machine Tool Lathe Grinding 1pc (Color : B)
Asin: B0D2M4VK8F | Model: SBTRKT | PartNumber: SBTRKT | Ean: 9088954986558
Good Grip: The Rotary Handwheel Handle Gives You A Comfortable Grip..
Wide Application: Rotary Handwheel Handles Are Widely Used In Surface Grinders, Molding And Polishing Machines, Precision Drilling And Milling Machines, Lathes, Boring Machines, Tapping Machines, Drilling Machines, Bench Lathes, Table Saws And So On..
Convenient: Easy To Install, Improve Work Efficiency.
Quality Material: These Knob Replacement Parts Are Made Of Plastic And Metal, Sturdy And Strong. The Bolts Are Made Of Metal Material, Strong, Wear-Resistant And Corrosion-Resistant..
Features
- Package Content: 1PCS x Swivel Handle Knob
- Quality Material: These knob replacement parts are made of plastic and metal, sturdy and strong. The bolts are made of metal material, strong, wear-resistant and corrosion-resistant.
- Good Grip: The rotary handwheel handle gives you a comfortable grip.
- Convenient: easy to install, improve work efficiency
- Wide application: Rotary handwheel handles are widely used in surface grinders, molding and polishing machines, precision drilling and milling machines, lathes, boring machines, tapping machines, drilling machines, bench lathes, table saws and so on.
- See more on Amazon...
Brand: SBTRKT | Manufacturer: SBTRKT
Dimensions: 0.79 x 1.18 x 0.79 Inches | Weight: 0.44 Pounds
See On Amazon #21
1PC M6 M8 M10 M12 Revolving Handwheel Machine Handle Male Threaded Stem for Milling Machine Thumb Screw Handle Hand Wheel Screws (Color : M12X100)
Asin: B0D2M4M5X4 | Model: SBTRKT | PartNumber: SBTRKT | Ean: 9088954986695
Easy To Use: You Can Replace Your Broken Knob Well With This Knob..
Package Content: 1Pcs X Swivel Handle Knob.
Applications: Widely Used In Lathe, Machinery And Equipment, Instrumentation, Industrial Equipment..
Quality Materials: These Knob Replacement Parts Are Made Of Plastic And Metal, Sturdy And Strong. The Bolt Is Made Of Metal Material, Strong, Wear-Resistant And Corrosion-Resistant..
Features
- Good grip: The rotary handwheel knob gives you a comfortable grip
- Quality materials: These knob replacement parts are made of plastic and metal, sturdy and strong. The bolt is made of metal material, strong, wear-resistant and corrosion-resistant.
- Easy to use: you can replace your broken knob well with this knob.
- Applications: Widely used in lathe, machinery and equipment, instrumentation, industrial equipment.
- Package Content: 1PCS x Swivel Handle Knob
- See more on Amazon...
Brand: SBTRKT | Manufacturer: SBTRKT
Dimensions: 0.79 x 1.18 x 0.79 Inches | Weight: 0.44 Pounds
See On Amazon #22
Oneyijun 4 Pcs M6 x 50mm Star Clamping Knob Grip Thumb Screw Head Diameter 38mm Knobs Nut Screws Tightening Thread Replacement Machine Handle
Asin: B096MYW1PT | Model: OneyiBK1-M6x50 | PartNumber: OneyiBK1-M6x50
Pitch: 1Mm / 0.039 Inch..
Package Content: 4 Pcs. Great Replacement For Your Broken One With This Star Knob. Widely Used For Lathe Machine, Mechanical Equipment, Instrument And Apparatus, Food And Pharmaceutical Industry Equipment..
Thread Diameter: 6Mm / 0.23 Inch ，Thread Length: 50Mm / 1.96 Inch..
Handle Diameter: 38Mm / 1.49 Inch..
Features
- Material: Carbon Steel, Plastic. Screw Surface Treatment: White Zinc Plating.
- Handle Diameter: 38mm / 1.49 inch.
- Pitch: 1mm / 0.039 inch.
- Thread Diameter: 6mm / 0.23 inch Thread Length: 50mm / 1.96 inch.
- Package Content: 4 Pcs. Great replacement for your broken one with this Star Knob. Widely used for lathe machine, mechanical equipment, instrument and apparatus, food and pharmaceutical industry equipment.
- See more on Amazon...
Brand: Oneyijun | Manufacturer: Oneyijun
See On Amazon #23
uxcell Clamping Screw Knob, Plum Hex Shaped Grips Star Knob M6 x 50mm Male Thread, 10 Pcs
Asin: B07RBKNNLQ | Model: a19031300ux0057 | PartNumber: a19031300ux0057
Great Replacement For Your Broken One With This Knob..
Widely Used For Lathe Machine, Mechanical Equipment, Instrument And Apparatus, Industry Equipment..
Thread Type Is Metric M6 , Please Check The Thread Size You Need Before Buying..
Total Height: 59Mm / 2.30Inch ; Package Content: 10Pcs X Screw Knob..
Features
- Thread Size: M6 x 50mm / 0.23 x 1.96inch(D*L) ; Head Dia (Approx):25mm / 0.98inch.
- Total Height: 59mm / 2.30inch ; Package Content: 10pcs x Screw Knob.
- Great replacement for your broken one with this knob.
- Thread Type is metric M6 , please check the thread size you need before buying.
- Widely used for lathe machine, mechanical equipment, instrument and apparatus, industry equipment.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.04 x 1.97 x 0.24 Inches | Weight: 0.29 Pounds
See On Amazon #24
NACX M8 x 60mm Thread Clamping Knob, Thumb Screw, Star Hand Knob Tightening Screw Knob for Machinery, 10Pcs
Asin: B07VPBGVHW | Model: 155-161 | PartNumber: 155-161
This Plastic Hand Knob Is Easy To Install, Can Remove Without Need Of Any Tools..
Widely Used In Lathes, Mechanical Equipment, Instrument And Apparatus, Industrial Equipment..
Screw On Type Design, Smooth Lines And Finger Grip Spacing For Simple Turning..
The Head Is Made Of Plastic, With Good Toughness And Strong Anti-Aging Ability. The Screw Is Corrosion Resistant..
Features
- Thread Size: M8 x 60mm / 0.31 x 2.36nch (D * L); Head Diameter: 27mm / 1.06inch.
- The head is made of plastic, with good toughness and strong anti-aging ability. The screw is corrosion resistant.
- This plastic hand knob is easy to install, can remove without need of any tools.
- Screw on type design, smooth lines and finger grip spacing for simple turning.
- Widely used in lathes, mechanical equipment, instrument and apparatus, industrial equipment.
- See more on Amazon...
Brand: NACX | Manufacturer: NACX
Dimensions: 0.01 x 2.36 x 0.31 Inches
See On Amazon #25
OD. 9" Ultimate Handwheel for 1 Inch or Less Shaft with 2 Type Set Screw and Revolving Knob Handle Included Can be Used Every Machinery Parts Such as Table Saw Milling Lathe Vise Machines.
Asin: B08L5YLMXH | Model: 225 - 25.4 | PartNumber: 225 - 25.4
The Ultimate Handwheel Boasts A User-Friendly Design That Is Easy To Install And Use. It Is Adjustable To Fit Any Size Bore And Built To Withstand Heavy Usage. Its Ergonomic Design Features A Comfortable Grip For Extended Use..
Our Lifetime Warranty Reflects Our Commitment To Providing The Highest Quality Products And Services. We Stand Behind Our Products And Services And Will Work To Resolve Any Issues That Arise. If Our Products Or Services Do Not Meet Your Expectations, We Offer A Full Refund Or Replacement At No Additional Cost. Customer Satisfaction Is Our Top Priority..
This Product Is Designed To Last Up To 40 Years With Excellent Wear, Oil, And Weather Resistance. While Caution Should Be Taken To Avoid Dropping It On Hard Surfaces Due To Its Slightly Weaker Strength, It Offers Superior Durability And Can Be Used In A Wide Range Of Temperatures. For Proper Handling, Refer To The Instructional Video..
The Ultimate Handwheel Saves Time, Money, And Ensures Safety With Its High-Quality Materials, Easy Installation, And User-Friendly Design. It Is Durable And Long-Lasting, Making It The Ideal Solution For Any Machine..
Features
- Our handwheel is versatile and can be used on any machine. It is built to last with premium materials and features a unique design. Its sleek finish makes it easy to install and operate, providing a dependable and efficient means of control.
- The Ultimate Handwheel saves time, money, and ensures safety with its high-quality materials, easy installation, and user-friendly design. It is durable and long-lasting, making it the ideal solution for any machine.
- The Ultimate Handwheel boasts a user-friendly design that is easy to install and use. It is adjustable to fit any size bore and built to withstand heavy usage. Its ergonomic design features a comfortable grip for extended use.
- This product is designed to last up to 40 years with excellent wear, oil, and weather resistance. While caution should be taken to avoid dropping it on hard surfaces due to its slightly weaker strength, it offers superior durability and can be used in a wide range of temperatures. For proper handling, refer to the instructional video.
- Our lifetime warranty reflects our commitment to providing the highest quality products and services. We stand behind our products and services and will work to resolve any issues that arise. If our products or services do not meet your expectations, we offer a full refund or replacement at no additional cost. Customer satisfaction is our top priority.
- See more on Amazon...
Brand: DONGYANG Ind. Co., | Manufacturer: DONGYANG Ind. Co.,
Dimensions: 2.75 x 8.86 x 2.75 Inches | Weight: 3.30 Pounds
Warranty: Lifetime Warrenty
See On Amazon #26
Mardatt 20 Sets M6x30mm Star Knobs Male Thread Clamping Knob Screw Hand Tightening Knob Quick Removal Replacement Parts with 304 Stainless Steel Hex Nuts and Flat Washers
Asin: B08QMFRCJZ | Model: M-XuanNiuDG | PartNumber: M-XuanNiuDG | Ean: 0782125974267 | UPC: 782125974267
✽3.【Star-Shaped Handle】 --- Using These Star Knobs Nuts As Jigs, Fixtures, Accessories And Much More. They Can Give You A Nonslip & Comfortable Hand Grip. At The Same Time, Provide Smooth Adjustments In Your Various Applications Without Being Scratched..
✽5.【Wide Application】-----This Assorted While Versatile Set Will Be Super Useful For Your Woodworking, Metal Working And Auto Body Shops Projects! They Are Widely Used As Replacements, Accessories, Jigs And Fixtures Ect. Easy To Install And Remove Without Tools, Our Star Knobs Would Be A Nice Selection For You..
✽4.【Easy To Install】 --- Clean And Accurate Bolt Thread Makes Installation Easy And Durable, While Smooth Hand Knob Surface Provides A Good Appearance. Washers And Hex Nuts Match The Thread Well, Convenient For You To Use..
✽2.【Durable & Strong Type】 --- These Star Knobs Have Premium Plastic Handles, Thick Enough To Give You A Secure & Comfortable Grip. Besides, The Long Bolts Are Made Of Zinc-Plated Steel, Hold Tight, Corrosion-Resistant, Not Easy To Break, Ensuring Long-Time Durability!.
Features
- 1. What s In The Package --- The package includes 20pcs M6x30mm Star Knobs with 20pcs matching 304 hex nuts and 20pcs flat washers, assorted accessories can meet your different needs.
- 2. Durable & Strong Type --- These star knobs have premium plastic handles, thick enough to give you a secure & comfortable grip. Besides, the long bolts are made of zinc-plated steel, hold tight, corrosion-resistant, not easy to break, ensuring long-time durability!
- 3. Star-shaped Handle --- Using these star knobs nuts as jigs, fixtures, accessories and much more. They can give you a nonslip & comfortable hand grip. At the same time, provide smooth adjustments in your various applications without being scratched.
- 4. Easy to Install --- Clean and accurate bolt thread makes installation easy and durable, while smooth hand knob surface provides a good appearance. Washers and hex nuts match the thread well, convenient for you to use.
- 5. Wide Application -----This assorted while versatile set will be super useful for your woodworking, metal working and auto body shops projects! They are widely used as replacements, accessories, jigs and fixtures ect. easy to install and remove without tools, our star knobs would be a nice selection for you.
- See more on Amazon...
Brand: Mardatt | Manufacturer: Mardatt
See On Amazon #27
MroMax 3Pcs M6 x 30mm Clamping Lever Handle Aluminum Alloy Male Thread Adjustable Handle Lathe Machine Knob for Machinery, Woodworking and Industry Equipment Silver Tone
Asin: B0826Z897L | Model: MRO191109H-0027 | PartNumber: MRO191109H-0027
【Easy To Use】By Pressing Down On The Handle Button The Serrations Are Disengaged And The Handle Can Then Be Turned To The Desired Position.The Small Size Allows To Be Carried Conveniently And Also Easy To Use..
【Package Content】 3Pcs X Adjustable Clamping Handle..
【Range Of Application】Adjustable Position Handle Adjustment Is Mainly Used For Mechanical Operating Parts Of The Location, Height, Etc. Such As Machine Tool, Welding Equipment, Printing Equipment, Woodworking Machinery, Packaging Machinery, Dyeing Equipment, Etc..
【Product Material】Our Adjustable Clamping Handle Is Made Of Aluminum Alloy, Sturdy And Durable..
Features
- Product Size Thread Diameter: M6; Thread Length: 30mm/ 1.18".
- Product Material Our Adjustable Clamping Handle is made of aluminum alloy, sturdy and durable.
- Easy to Use By pressing down on the handle button the serrations are disengaged and the handle can then be turned to the desired position.The small size allows to be carried conveniently and also easy to use.
- Range of Application Adjustable position handle adjustment is mainly used for mechanical operating parts of the location, height, etc. Such as machine tool, welding equipment, printing equipment, woodworking machinery, packaging machinery, dyeing equipment, etc.
- Package Content 3Pcs x Adjustable Clamping Handle.
- See more on Amazon...
Brand: MroMax | Manufacturer: MroMax
Weight: 78.50 Grams
See On Amazon #28
uxcell Clamping Handle Screw Knobs Handle Star Knob M6 x 20mm Male Thread 3pcs
Asin: B07NVG6ZBY | Model: a19030200ux0552 | PartNumber: a19030200ux0552
Main Color:Black.
Widely Used For Lathe Machine, Mechanical Equipment, Instrument And Apparatus, Industry Equipment..
Great Replacement For Your Broken One With This Knob..
Main Material: Plastic, Metal;.
Features
- Head Dia: 32mm / 1.26" Thread Size: M6 x 20mm (D*L);
- Main Material: Plastic, Metal;
- Main Color:Black
- Great replacement for your broken one with this knob.
- Widely used for lathe machine, mechanical equipment, instrument and apparatus, industry equipment.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #29
M10 x 35mm Star Shape Screw Knobs 5-Star Stud Tightening Screw Grip Handheld for Machine Tool Pack of 5
Asin: B08DR8QBCL | Model: ty00300001 | PartNumber: ty00300001 | Ean: 0731551461650 | UPC: 731551461650
Contemporary Satin Textured Finish ,Scratch And Dirt Resistant..
Widely Used For Mechanical Equipments, Instruments, Apparatus, Industry Equipments.Someone Uses It As An Umbrella Handle, Maybe It Can Inspire Your Project, Is A Small And Replaceable Part..
Simple Installation, No Need For Other Tools, Can Be Installed Or Disassembled With One Hand, Saving Your Time..
Plastic Star Head For Comfortable Grip..
Features
- Thread Size: M10x35mm(METRIC) / 0.39''x1.37''(D*L).
- Plastic star head for comfortable grip.
- Contemporary Satin Textured Finish ,Scratch and Dirt resistant.
- Simple installation, no need for other tools, can be installed or disassembled with one hand, saving your time.
- Widely used for mechanical equipments, instruments, apparatus, industry equipments.Someone uses it as an umbrella handle, maybe it can inspire your project, Is a small and replaceable part.
- See more on Amazon...
Manufacturer: DGZ Store
See On Amazon #30
uxcell Clamping Screw Knob, 38mm Dia Plum Hex Shaped Grips Star Knob M8 x 20mm Male Thread, 2pcs
Asin: B07R47WN28 | Model: a19031300ux0067 | PartNumber: a19031300ux0067
Great Replacement For Your Broken One With This Knob..
Widely Used For Lathe Machine, Mechanical Equipment, Instrument And Apparatus, Industry Equipment..
Thread Type Is Metric M8 , Please Check The Thread Size You Need Before Buying..
Total Height: 39Mm / 1.52Inch; Package Content: 2Pcs X Screw Knob..
Features
- Thread Size: M8 x 20mm / 0.30 x 0.79inch(D*L); Head Dia (Approx): 38mm / 1.47inch.
- Total Height: 39mm / 1.52inch; Package Content: 2pcs x Screw Knob.
- Great replacement for your broken one with this knob.
- Thread Type is metric M8 , please check the thread size you need before buying.
- Widely used for lathe machine, mechanical equipment, instrument and apparatus, industry equipment.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.01 x 0.79 x 0.31 Inches | Weight: 0.10 Pounds
See On Amazon
Looking For Something Else?
Search