Best chucking reamers - Buying Guide
Last Updated: 05/04/2024
Share on
Bestselling chucking reamers on Amazon
- 5/8 Bridge Construction Reamer Drill Bit, M2 HSS Taper Chucking Reamer for Steel Alloy Metal Wood P...
- uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 To...
- uxcell 1/8" 3/16" 1/4" 5/16" Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Str...
- 5PCS M2 HSS Taper Chucking Reamer Set,3/8",1/2",5/8",3/4",1 Reamer Fit 1/2" Round Shank,Bridge/Cons...
- Jerax tools 4pcs Bridge/Construction Reamer Set, 3/8", 1/2", 5/8", 3/4 , M2 HSS Taper Chucking Reame...
- Yunnergo 5/8" Bridge Reamer, Bridge/Construction Reamer 1/2" Shank Taper Chucking Reamer Bit Tool Co...
- uxcell Chucking Reamer 1/2", H7 HSS Lathe Machine Reamer 6 Straight Flutes, Round Shank Milling Cutt...
- uxcell Chucking Reamer 14mm, H7 HSS Lathe Machine Reamer 6 Straight Flutes, Round Shank Milling Cutt...
- Lichamp 4 Piece Reamers Set for Metal, Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches H...
- Accusize Industrial Tools 29 Pc 1/16'' to 1/2'' by 1/64'' H.S.S. Chucking Reamer Set, Straight Flute...
#1
5/8 Bridge Construction Reamer Drill Bit, M2 HSS Taper Chucking Reamer for Steel Alloy Metal Wood Plastic, 1/2" Non-Slip Shank, 5-Spiral Flutes Car Reamer, to Align or Enlarge Holes, 16mm
Asin: B0CFJC9J1N
Special Features – The 5/8Inch Reamer Bit Features A 1/2" Round Shank With 3-Sides, A Tapered Point, And A Safe Stop, Ensuring A Firm Grip In The Chuck, Allowing It To Enter Imperfect Holes To Ream Steadily, And Stopping The Drill Safely When The Hole Is Complete..
User Tips: 1. Always Wear Appropriate Safety Gear. 2. Securely Mount The Reamer Drill Bit In The Chuck Of Your Portable Electric Or Pneumatic Tools. 3. Position The Bit In The Predrilled Hole, Gradually Increase Speed, Maintain Pressure, Keep The Tool Steady, And Add Cutting Oil. 4. Reduce Speed Near The Desired Hole Size For A Smooth Finish..
Broad Applications – This 5/8" Reamer Drill Bit Can Efficiently Handle Steel, Metal, Alloy Aluminum, Brass, Copper, Iron, Nickel, Plastic And Pvc Pipes Etc.; Makes It A Go-To Tool For Both Woodworking And Metalworking Projects, Such As Bridge Construction, Steel Erection, Automotive Truck Trailer Maintenance..
Built To Last - Our 5/8" Conduit Reamer Is Constructed With M2 High-Speed Steel. Featuring Five Long Tapped Right-Hand Spiral Flutes With Precisely Ground Sharp Edges, Enables It To Cut Materials Smoothly And Remove Debris Efficiently, And Guarantees Durability And Performance..
Features
- Seamlessly and Expertly - The bridge reamer, also known as construction reamers, is used to align or enlarge or smooth Predrilled holes to 5/8" and fit precisely before installing bolts or rivets. This heavy-duty 5/8" reamer drill bit is crafted to ensure seamless and expert performance in your projects.
- Built to Last - our 5/8 conduit reamer is constructed with M2 high-speed steel. Featuring five long tapped right-hand spiral flutes with precisely ground sharp edges, enables it to cut materials smoothly and remove debris efficiently, and guarantees durability and performance.
- Special Features The 5/8inch reamer bit features a 1/2 Round Shank with 3-Sides, a Tapered Point, and a Safe Stop, ensuring a firm grip in the chuck, allowing it to enter imperfect holes to ream steadily, and stopping the drill safely when the hole is complete.
- Broad applications This 5/8 reamer drill bit can efficiently handle steel, metal, alloy aluminum, brass, copper, iron, nickel, plastic and PVC pipes etc.; makes it a go-to tool for both woodworking and metalworking projects, such as bridge construction, steel erection, automotive truck trailer maintenance.
- User Tips: 1. Always wear appropriate safety gear. 2. Securely mount the reamer drill bit in the chuck of your portable electric or pneumatic tools. 3. Position the bit in the Predrilled Hole, gradually increase speed, maintain pressure, keep the tool steady, and add cutting oil. 4. Reduce speed near the desired hole size for a smooth finish.
- See more on Amazon...
Brand: DKIBBITH | Manufacturer: DKIBBITH
See On Amazon #2
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs
Asin: B08ZM48Q6T | Model: a20102800ux0556 | PartNumber: a20102800ux0556
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm; tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell 1/8" 3/16" 1/4" 5/16" Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool Reamer Set for Bore Machining 4pcs
Asin: B09C8M58TC | Model: a20103000ux0036 | PartNumber: a20103000ux0036
Wide Applications: Sharp Blade For Easy Cutting And High Efficiency. Used For Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, Alloy, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Used On Screw Machines, Turret Lathes, Drilling And Milling Machines. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of High-Speed Steel, The Reamers Have Combination Of Hardness And Toughness For Wear Resistance. The Cutter Body Is Sturdy And Damage-Resistant, With Strong Heat Resistance That Stable Processing. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: Cutting diameter: 1/8", 3/16", 1/4", 5/16"; accuracy class: H7. The hand reamers ream the cylindrical shape. Good for general purpose applications. Straight round shank provides a stable holding and can be used with a variety of tool holding systems.
- Material and Coating: Made of high-speed steel, the reamers have combination of hardness and toughness for wear resistance. The cutter body is sturdy and damage-resistant, with strong heat resistance that stable processing. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Sharp blade for easy cutting and high efficiency. Used for processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, alloy, and other soft materials.
- Easy to Use: Can be used on screw machines, turret lathes, drilling and milling machines. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #4
5PCS M2 HSS Taper Chucking Reamer Set,3/8",1/2",5/8",3/4",1 Reamer Fit 1/2" Round Shank,Bridge/Construction Reamer Drill Bit for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole Reamer
Asin: B0CWRLL4BP | Model: BR-010 | PartNumber: BR-010
Makes Reaming Holes Out Extremely Easier Than Using Large Drill Bits,The Reamed Hole Is Smooth Without Tear-Outs. But There Must Be An Existing Hole Or Pilot Hole With A Diameter Smaller Than Our Bridge Steel Reamer Bit Before Use.
Commonly Used In Bridge,Construction,Steel Erection And Automotive Truck Trailer Industries,Our Bridge/Construction Reamer Bit For Steel,Metal,Alloy Aluminum,Brass,Plastic,Iron,Nickel,Copper,Cast Iron Etc.Three Symmetrically Placed Flats On Shank Provide Positive Grip In Portable Electric And Pneumatic Tools.
The Tapered Point Design Permits The Tapered Reamer For Metal To Enter Into The Overlapping Holes Of Out-Of-Line,Make The Bolt Holes Line Up.Enlarging The Holes In The Steering Knuckles And Pitman Arm.
The Heavy Duty High-Speed Steel Bridge Reamer Is Also Called Construction Reamers,It Used For Aligning An Existing Hole And Enlarging Undersized Hole Prior To Bolt Or Rivet Installation.Our Taper Reamer Bit Aligns And Enlarges Pre-Drilled Holes Ready For Bolting.
Features
- M2 HSS taper chucking reamer 5pcs set including 3/8",1/2",5/8",3/4" and 1 fit 1/2" shank chuck with 5-Spiral Flute. The bridge construction reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to enlarge a hole, you must first have an existing hole and then use our taper reamer to enlarge it
- The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our taper reamer bit aligns and enlarges pre-drilled holes ready for bolting
- Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be an existing hole or pilot hole with a diameter smaller than our bridge steel reamer bit before use
- The tapered point design permits the tapered reamer for metal to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm
- Commonly used in bridge,construction,steel erection and automotive truck trailer industries,our bridge/construction reamer bit for steel,metal,alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools
- See more on Amazon...
Brand: NOVINO | Manufacturer: NOVINO
See On Amazon #5
Jerax tools 4pcs Bridge/Construction Reamer Set, 3/8", 1/2", 5/8", 3/4 , M2 HSS Taper Chucking Reamer Drill Bit for Steel Alloy Aluminum Metal Wood Plastic, 3/8" or 1/2" Shank, to Enlarge/Align Holes
Asin: B09CTDQ8BN
[Tapered Point]: Allow Entry Into Overlapping Holes..
[Sizes]: 4 Pieces, Including 3/8" (Fit 3/8'' Shank Chuck), 1/2", 5/8" And 3/4" (Fit 1/2'' Shank Chuck)..
[Application]: Enlarge Or Align Existing Holes Through Mild Steel, Alloys, Aluminum, Wood, Plastic, Fiberglass Or Any Similar Hardness Material Prior To Rivet Or Bolt Installation. Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
[Spiral Flutes & Safety Stop]: Left Helix/Right Hand Cut Sheers Chips Away From Operator. Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Features
- [M2 HSS material]: Compared to other commonly used lower grade HSS, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability.
- [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability.
- [Tapered point]: allow entry into overlapping holes.
- [Application]: enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- [Sizes]: 4 pieces, including 3/8 (fit 3/8'' shank chuck), 1/2, 5/8 and 3/4 (fit 1/2'' shank chuck).
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
Weight: 1.00 pounds
See On Amazon #6
Yunnergo 5/8" Bridge Reamer, Bridge/Construction Reamer 1/2" Shank Taper Chucking Reamer Bit Tool Compatible With Steel Metal Alloy
Asin: B0CBWL64VB
3）Designed With Helical Flutes And Safety Stops To Keep Chips Away From The Operator. The Safety Collar Stops To Avoids Over-Penetration And Loss Of Operator Stability..
5）Commonly Used In Bridge, Construction, Steel Erection And Automotive Truck Trailer Industries, Specially Use In Structural Materials Such As Steel, Metal, Alloy Aluminum, Brass,Plastic, Iron, Nickel, Copper And Cast Iron Etc..
4）Comes With A Compact Size And A Light Weight As Well, The Convenient Installation Can Be Quickly Completed..
2）5/8 Bridge Reamer Is Made Of High-Quality Hss Steel, With High Toughness, High-Temperature Resistance, Corrosion Resistance And Long Service Life..
Features
- 1 The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.
- 2 5/8 bridge reamer is made of high-quality HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life.
- 3 Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to avoids over-penetration and loss of operator stability.
- 4 Comes with a compact size and a light weight as well, the convenient installation can be quickly completed.
- 5 Commonly used in bridge, construction, steel erection and automotive truck trailer industries, specially use in structural materials such as steel, metal, alloy aluminum, brass,plastic, iron, nickel, copper and cast iron etc.
- See more on Amazon...
Brand: Yunnergo | Manufacturer: Yunnergo
See On Amazon #7
uxcell Chucking Reamer 1/2", H7 HSS Lathe Machine Reamer 6 Straight Flutes, Round Shank Milling Cutting Tool, Reaming Drill Bit for Stainless Steel Metal Hole
Asin: B07JQ177BT | Model: a18091400ux0319 | PartNumber: a18091400ux0319
Straight Flute Reamer: Allows Chips And Debris To Escape Easily From The Hole, Well Suited For Most Applications In Shallow Cuts. Can Achieve The Required Roundness, Straightness, And Concentricity Of The Hole..
Uncoated Reamer Drill Bit: Features Just The Base Substrate Without Any Additional Coatings, Used On A Wide Range Of Materials, Including Aluminum, Brass, Copper, Mild Steel, Plastics And Composites. Tapping Fluid Or Cutting Oil Can Be Used To Lubricate The Reamer And Workpiece To Help Reduce Friction And Increase Tool Life..
Machine Reamer: Used In Drilling Machines, Milling Machines, Lathes, And Machining Centers. Can Be Used With A Wide Variety Of Tool Holding Systems. Reamers Are Used For Light Cut, Repair Work, Removing Stock Or Simply For Enlarging Holes..
Wide Applications: The Chucking Reamer Is Designed For Accurate Enlarging, Smoothing Or Finishing Holes In Stainless Steel, Cast Iron, Aluminum, Plastic, Wood, And Other Non-Ferrous Metals, Widely Used In Various Parts Of Machinery Such As Gears, Bearings, Bushings, Etc...
Features
- Specifications: Cutting Dia.: 1/2"; Tool flute length: 26.5mm / 1.04"; Overall length: 127mm / 5". High-speed steel reamers provide durability, high hardness, good toughness, wear resistance, high temperature resistance, the ability to maintain sharpness over time.
- Wide Applications: The chucking reamer is designed for accurate enlarging, smoothing or finishing holes in stainless steel, cast iron, aluminum, plastic, wood, and other non-ferrous metals, widely used in various parts of machinery such as gears, bearings, bushings, etc..
- Straight Flute Reamer: Allows chips and debris to escape easily from the hole, well suited for most applications in shallow cuts. Can achieve the required roundness, straightness, and concentricity of the hole.
- Machine Reamer: Used in drilling machines, milling machines, lathes, and machining centers. Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
- Uncoated Reamer Drill Bit: Features just the base substrate without any additional coatings, used on a wide range of materials, including aluminum, brass, copper, mild steel, plastics and composites. Tapping fluid or cutting oil can be used to lubricate the reamer and workpiece to help reduce friction and increase tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 5.12 x 0.79 inches
See On Amazon #8
uxcell Chucking Reamer 14mm, H7 HSS Lathe Machine Reamer 6 Straight Flutes, Round Shank Milling Cutting Tool, Metric Reaming Drill Bit for Stainless Steel Metal Hole
Asin: B07K4596C5 | Model: a18092000ux0070 | PartNumber: a18092000ux0070
Straight Flute Reamer: Allows Chips And Debris To Escape Easily From The Hole, Well Suited For Most Applications In Shallow Cuts. Can Achieve The Required Roundness, Straightness, And Concentricity Of The Hole..
Uncoated Reamer Drill Bit: Features Just The Base Substrate Without Any Additional Coatings, Used On A Wide Range Of Materials, Including Aluminum, Brass, Copper, Mild Steel, Plastics And Composites. Tapping Fluid Or Cutting Oil Can Be Used To Lubricate The Reamer And Workpiece To Help Reduce Friction And Increase Tool Life..
Machine Reamer: Used In Drilling Machines, Milling Machines, Lathes, And Machining Centers. Can Be Used With A Wide Variety Of Tool Holding Systems. Reamers Are Used For Light Cut, Repair Work, Removing Stock Or Simply For Enlarging Holes..
Wide Applications: The Chucking Reamer Is Designed For Accurate Enlarging, Smoothing Or Finishing Holes In Stainless Steel, Cast Iron, Aluminum, Plastic, Wood, And Other Non-Ferrous Metals, Widely Used In Various Parts Of Machinery Such As Gears, Bearings, Bushings, Etc...
Features
- Specifications: Cutting Dia.: 14mm / 0.55"; Tool flute length: 50mm / 1.97"; Overall length: 158mm / 6.22". High-speed steel reamers provide durability, high hardness, good toughness, wear resistance, high temperature resistance, the ability to maintain sharpness over time.
- Wide Applications: The chucking reamer is designed for accurate enlarging, smoothing or finishing holes in stainless steel, cast iron, aluminum, plastic, wood, and other non-ferrous metals, widely used in various parts of machinery such as gears, bearings, bushings, etc..
- Straight Flute Reamer: Allows chips and debris to escape easily from the hole, well suited for most applications in shallow cuts. Can achieve the required roundness, straightness, and concentricity of the hole.
- Machine Reamer: Used in drilling machines, milling machines, lathes, and machining centers. Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
- Uncoated Reamer Drill Bit: Features just the base substrate without any additional coatings, used on a wide range of materials, including aluminum, brass, copper, mild steel, plastics and composites. Tapping fluid or cutting oil can be used to lubricate the reamer and workpiece to help reduce friction and increase tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 7.87 x 0.79 inches
See On Amazon #9
Lichamp 4 Piece Reamers Set for Metal, Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers
Asin: B0B5HW8N41 | Model: TRS-A10400 | PartNumber: TRS-A10400
Wide Applications - Works Well In Free Cutting And Carbon Steels, As Well As Soft, Non-Ferrous Materials Such As Aluminum, Brass And Copper..
Safe Straight Shank - Round Shank With 3 Flats To Prevent Slipping In The Drill Chuck, Safety Flange/ Stop Collar To Prevent The Reamer Running Through The Hole..
Five Grooves Fast Drilling - Reversed Spiral Push Chips Forward And Are Ideal For Through-Hole Applications, Reduces The Friction, Runs Cooler, Performs Well In Heat, Corrosion And Rust Resistance..
M2 High Speed Steel - Hss M2 Ensures Sharp And Fast Execution In Most Hard Steel Material For Clean Results, While Provides Good Wear Resistance In Mild Steels And Non-Ferrous Materials..
Features
- Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles.
- M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials.
- Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper.
- Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance.
- Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole.
- See more on Amazon...
Brand: Lichamp | Manufacturer: Lichamp
Dimensions: 2.17 x 8.46 x 5.91 inches | Weight: 1.76 pounds
See On Amazon #10
Accusize Industrial Tools 29 Pc 1/16'' to 1/2'' by 1/64'' H.S.S. Chucking Reamer Set, Straight Flute, Right Hand Cut, 5500-SF00
Asin: B00HQMXL38 | Model: 5500-SF00 | PartNumber: 5500-SF00 | Ean: 0663566007748, 0641799805454 | UPC: 663566007748, 641799805454
Precision-Ground With Decimal Equivalents From 0.0625" To 0.5000", Catering To Tight Tolerance Requirements..
Designed For Use In Lathes, Drill Presses, And Milling Machines, Enhancing Tool Longevity And Machining Accuracy..
Flute Lengths Vary From 1/2" To 2", With Overall Lengths Between 2-1/2" To 8", Providing Versatility Across Operations..
Straight Flute Design And Right-Hand Cut Orientation Ensure Smooth, Precise Cuts And Excellent Surface Finish..
Features
- Comprehensive set of 29 H.S.S. chucking reamers, sizes range from 1/16" to 1/2" by 1/64" increments for diverse applications; straight shank, straight flute, right-hand cut.
- Straight flute design and right-hand cut orientation ensure smooth, precise cuts and excellent surface finish.
- Precision-ground with decimal equivalents from 0.0625 to 0.5000, catering to tight tolerance requirements.
- Flute lengths vary from 1/2 to 2, with overall lengths between 2-1/2 to 8, providing versatility across operations.
- Designed for use in lathes, drill presses, and milling machines, enhancing tool longevity and machining accuracy.
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 12.20 x 3.54 x 9.45 inches | Weight: 2.45 Kilograms
See On Amazon #11
Rannb Chucking Reamer Adjustable Hand Reamer Adjustment Range 21-23mm
Asin: B089GG5GC9 | Model: wby1614 | PartNumber: wby1614 | Ean: 0778601987821 | UPC: 778601987821
【How To Adjust】Blades Are Adjusted By Loosening One Nut And Tightening The Other..
【Applicable Material】A3 Steel, Alloy Steel, Cast Iron, Cast Steel, Aluminum And Other Metal Materials..
【Adjustment Range】21-23Mm; After Reaming The Hole Can Get The Exact Size And Shape..
【Square End】Square End Allows The User To Turn The Reamer By Hand With An Adjustable Wrench Or Straight Handle Tap Wrench..
Features
- Material The Chucking Reamer is made of premium HSS with good hardness and toughness.
- Square End Square end allows the user to turn the reamer by hand with an adjustable wrench or straight handle tap wrench.
- How to Adjust Blades are adjusted by loosening one nut and tightening the other.
- Adjustment Range 21-23mm; After reaming the hole can get the exact size and shape.
- Applicable Material A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials.
- See more on Amazon...
Brand: Rannb | Manufacturer: Rannb
See On Amazon #12
HHIP 2006-3010 5/32" High Speed Steel Straight Shank Chucking Reamer, 1" Flute Length, 4" Overall Length, 5/32"
Asin: B076DLLTYP | Model: 2006-3010 | PartNumber: 2006-3010 | Ean: 0769053091655 | UPC: 769053091655
Straight Flute.
4-Inches Overall Length.
45 Degree Chamfer Allows Gradual Starting Load.
Made Of High Speed Steel.
Features
- ANSI standard
- Made of high speed steel
- Straight flute
- 45 degree chamfer allows gradual starting load
- 4-inches overall length
- See more on Amazon...
First Available: 01/28/2018
Brand: HHIP | Manufacturer: ABS Import Tools Inc.
Dimensions: 6.00 x 3.00 x 1.00 inches
See On Amazon #13
3/4" Drill Bridge/Construction Reamer Bit with 1/2" Shank HSS Taper Chucking Reamer Bit Tool for Steel Metal Wood Alloy Drilling Hole
Asin: B0BNXFBNR1
Design: Tapered Point Design Allows Reamer Bits To Enter Irregular Overlapping Holes, Aligning Bolt Holes.
Material: Made Of High-Quality Steel, High Toughness, High Temperature Resistance, Corrosion Resistance, Long Service Life.
Note: The 3/4" Bridge Reamer Bit Is Not A Drill Bit, Only Aligns The Reamer With The Pre-Drilled Hole. If You Need To Enlarge The Hole To 3/4" . Must Have A Pre-Drilled First, Then Reamed To 3/4".
Application: Especially For Steel, Metal, Alloy Aluminum, Brass, Plastic, Iron, Nickel, Copper, Cast Iron And Other Structural Materials.
Features
- What it does: Heavy-duty high-speed steel bridge reamers,expand or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass, or any material of similar hardness prior to rivet or bolt installation, Deburring and trimming of holes in structural materials
- Application: Especially for steel, metal, alloy aluminum, brass, plastic, iron, nickel, copper, cast iron and other structural materials
- Design: Tapered point design allows reamer bits to enter irregular overlapping holes, aligning bolt holes
- Note: The 3/4 Bridge Reamer Bit is not a drill bit, only aligns the reamer with the pre-drilled hole. If you need to enlarge the hole to 3/4 . Must have a pre-drilled first, then reamed to 3/4
- Material: Made of high-quality steel, high toughness, high temperature resistance, corrosion resistance, long service life
- See more on Amazon...
Brand: SZRKRLA | Manufacturer: SZRKRLA
See On Amazon #14
uxcell 5.5mm Chucking Reamer, HSS Cobalt M35 Lathe Machine Reamer D4 6 Straight Flutes, Round Shank Milling Cutting Tool, for Stainless Steel Alloy Copper Metal
Asin: B08F9N8F93 | Model: a19112600ux0384 | PartNumber: a19112600ux0384
Round Shank: Can Be Used With A Wide Variety Of Tool Holding Systems. Good For Use In Through Or Blind Holes And Used For Light Cut, Repair Work, Removing Stock.
Application: Designed For Accurate Reaming In Stainless Steel, Alloy Steel And Other Metal Materials, Used On Equipment Including Screw Machines, Turret Lathes, Drill Presses And Machining Centers.
Features: Straight Flute Tool Allows Chips To Collect In The Flutes When Cutting, Well Suited For Most Applications In Shallow Cuts. Reamer Is With High Hardness, Toughness, Wear Resistance, Long Service Life.
Uncoated Tool: Features Just The Base Substrate Without Any Additional Treatment Or Coatings. Heat Treated And Quenched For Stable Performance, Suitable For Wide Ranges Of Applications.
Features
- Specifications: Cutting dia.: 5.5mm / 0.22"; tool flute length: 16mm / 0.63"; overall length: 84mm / 3.31"; accuracy: D4. High-speed steel tool with cobalt is good for general purpose applications
- Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications
- Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock
- Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Reamer is with high hardness, toughness, wear resistance, long service life
- Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs
Asin: B08ZM5TN75 | Model: a20102800ux0553 | PartNumber: a20102800ux0553
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
Accusize Industrial Tools 1-13 mm by 0.5 mm High-Speed Steel Chucking Reamer Set in a Fitted Case, Set of 25 Pieces, 5500-SB00
Asin: B00HRD3AAK | Model: 5500-SB00 | PartNumber: 5500-SB00 | Ean: 0641799805430, 0663566007724 | UPC: 663566007724, 641799805430
Diameter Tolerance Is +0.0001" To +0.0005" - 0.0000".
Set Of 25 Pieces.
Includes A Wooden Fitted Case.
Range Is 1 To 13 Millimeters By 0.5 Millimeter.
Features
- HSS chucking reamer set; Straight shank; Straight flute, right-hand cut
- Range is 1 to 13 millimeters by 0.5 millimeter
- Diameter tolerance is +0.0001 to +0.0005 - 0.0000
- Includes a wooden fitted case
- Set of 25 pieces
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 12.20 x 3.54 x 9.45 inches | Weight: 2.30 Kilograms
See On Amazon #17
uxcell 3/8" 5/8" 1/2" 3/4" Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool Reamer Set for Bore Machining 4pcs
Asin: B09C8L512Q | Model: a20103000ux0040 | PartNumber: a20103000ux0040
Wide Applications: Sharp Blade For Easy Cutting And High Efficiency. Used For Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, Alloy, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Used On Screw Machines, Turret Lathes, Drilling And Milling Machines. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of High-Speed Steel, The Reamers Have Combination Of Hardness And Toughness For Wear Resistance. The Cutter Body Is Sturdy And Damage-Resistant, With Strong Heat Resistance That Stable Processing. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: Cutting diameter: 3/8", 5/8", 1/2", 3/4"; accuracy class: H7. The hand reamers ream the cylindrical shape. Good for general purpose applications. Straight round shank provides a stable holding and can be used with a variety of tool holding systems.
- Material and Coating: Made of high-speed steel, the reamers have combination of hardness and toughness for wear resistance. The cutter body is sturdy and damage-resistant, with strong heat resistance that stable processing. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Sharp blade for easy cutting and high efficiency. Used for processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, alloy, and other soft materials.
- Easy to Use: Can be used on screw machines, turret lathes, drilling and milling machines. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #18
8pcs Reamer Set, HSS H8 Straight Shank Chucking Machine Cutter Milling Reamer Kit 3/4/5/6/7/8/9/10mm
Asin: B08693VD5L | Model: zhibingjiaodao | PartNumber: zhibingjiaodao | Ean: 0768894830515 | UPC: 768894830515
⭐This Hss H8 Reamer Set Can Process Surface Of Iron, Steel, Plastic, Wood, Copper, Aluminum And Other Metal Materials..
⭐Shank Diameter: 3/4/5/6/7/8/9/10Mm..
⭐The Straight Shank Milling Cutter Tool Set Are Widely Used For Bore Machining, Reaming To Mould Processing And Handicraft Processing, Installed In Drilling Machine, Milling Machine, Etc.
⭐With Sharp Cutting-Edge, The Chucking Machine Reamer Set Have High Cutting Ability, High Accuracy And Clean Cutting..
Features
- The reamer set are made of high speed steel, high hardness and good toughness, long service life.
- With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting.
- This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials.
- The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc
- Shank Diameter: 3/4/5/6/7/8/9/10mm.
- See more on Amazon...
Brand: Together-life | Manufacturer: Together-life
Weight: 0.22 pounds
See On Amazon #19
Accusize Industrial Tools Fractional Sizes 1/8" Thru 1/2" by 16th HSS M2 Premium Chucking Reamer Set, Right Hand Cut, 7pcs/Set, 5528-SH00
Asin: B09CWZ7GRW | Model: 5528-SH00 | PartNumber: 5528-SH00 | Ean: 0663566025056 | UPC: 663566025056
They Are Regularly Pointed With A 45°Chamfer. The Straight-Flute Design Is Recommended For Most General-Purpose Reaming.
Straight Flute, Right-Hand Cut; Straight Shank; High Speed Steel.
Thru 1/2" Diameter +.0002" -.0000". Above 1/2" To 5/8" +.0003" -.0000". Above 5/8" To 1-1/2" +.0001" -.0004.
Made From Premium M2 H.S.S. Chucking Reamers Are Designed For Accurate Reaming In Most Materials Using All Types Of Equipment Including Screw Machines, Turret Lathes, Drill Presses, And Machining Centers.
Features
- Fractional Sizes 1/8" thru 1/2" by 16ths
- Made from premium M2 H.S.S. Chucking reamers are designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses, and machining centers
- They are regularly pointed with a 45 chamfer. The straight-flute design is recommended for most general-purpose reaming
- Thru 1/2 diameter +.0002 -.0000. Above 1/2 to 5/8 +.0003 -.0000. Above 5/8 to 1-1/2 +.0001 -.0004
- Straight Flute, Right-Hand Cut; Straight Shank; High Speed Steel
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 2.56 x 10.24 x 5.91 inches | Weight: 2.20 pounds
See On Amazon #20
HSS 1" Chucking Reamer - Straight Shank, Straight Flute
Asin: B008U9VEM6
2 3/4" Flute Length.
10 1/2" Overall Length.
1.000" Diameter.
Brand: Vermont Gage | Manufacturer: Meda - Superior Import
See On Amazon #21
Accusize Industrial Tools 7/8'' H.S.S. Straight Shank Straight Flute Chucking Reamer, Flute Length 2-5/8'', Oal 10'', Right Hand, 8 Flute, 5015-0245
Asin: B00U6JYG0A | Model: 5015-0245 | PartNumber: 5015-0245 | Ean: 0641799805232 | UPC: 641799805232
Straight Flute Design.
Tool Dimensions Include A Flute Length Of 2-5/8" And An Overall Length Of 10", Suitable For A Wide Range Of Machining Tasks..
Precisely Sized At 7/8" Diameter (Dec. Dia.: 0.8750") With A Tolerance Range Designed For Accuracy: +0.0001" To +0.0005"..
Features 8 Straight Flutes For Effective Chip Removal, Ensuring A Smooth Finish And Preventing Clogging..
Flute Length 2-5/8 Inches.
Constructed From High-Quality M2 High-Speed Steel For Outstanding Durability And Edge Retention In Various Materials..
Bright Finished.
Standard 45° Chamfered Cutting Edges Offer Versatile Cutting, Deburring, And Finishing Capabilities..
Standard 45 Degree Chambered Cutting Edge.
Features
- Straight shank, right hand cut
- Standard 45 degree chambered cutting edge
- Straight flute design
- Bright finished
- Flute length 2-5/8 inches
- Constructed from high-quality M2 high-speed steel for outstanding durability and edge retention in various materials.
- Precisely sized at 7/8 diameter (Dec. Dia.: 0.8750) with a tolerance range designed for accuracy: +0.0001 to +0.0005.
- Features 8 straight flutes for effective chip removal, ensuring a smooth finish and preventing clogging.
- Standard 45 chamfered cutting edges offer versatile cutting, deburring, and finishing capabilities.
- Tool dimensions include a flute length of 2-5/8 and an overall length of 10, suitable for a wide range of machining tasks.
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 11.42 x 1.18 x 1.18 inches | Weight: 1.30 Kilograms
See On Amazon #22
uxcell Chucking Reamer 1/4", H8 HSS Lathe Machine Reamer 6 Straight Flutes, Round Shank Milling Cutting Tool, Reaming Drill Bit for Stainless Steel Metal Hole
Asin: B07QLK1P91 | Model: a19032000ux0762 | PartNumber: a19032000ux0762
Straight Flute Reamer: Allows Chips And Debris To Escape Easily From The Hole, Well Suited For Most Applications In Shallow Cuts. Can Achieve The Required Roundness, Straightness, And Concentricity Of The Hole..
Uncoated Reamer Drill Bit: Features Just The Base Substrate Without Any Additional Coatings, Used On A Wide Range Of Materials, Including Aluminum, Brass, Copper, Mild Steel, Plastics And Composites. Tapping Fluid Or Cutting Oil Can Be Used To Lubricate The Reamer And Workpiece To Help Reduce Friction And Increase Tool Life..
Machine Reamer: Used In Drilling Machines, Milling Machines, Lathes, And Machining Centers. Can Be Used With A Wide Variety Of Tool Holding Systems. Reamers Are Used For Light Cut, Repair Work, Removing Stock Or Simply For Enlarging Holes..
Wide Applications: The Chucking Reamer Is Designed For Accurate Enlarging, Smoothing Or Finishing Holes In Stainless Steel, Cast Iron, Aluminum, Plastic, Wood, And Other Non-Ferrous Metals, Widely Used In Various Parts Of Machinery Such As Gears, Bearings, Bushings, Etc...
Features
- Specifications: Cutting Dia.: 1/4"; Tool flute length: 26mm / 1.02"; Overall length: 92mm / 3.62". High-speed steel reamers provide durability, high hardness, good toughness, wear resistance, high temperature resistance, the ability to maintain sharpness over time.
- Wide Applications: The chucking reamer is designed for accurate enlarging, smoothing or finishing holes in stainless steel, cast iron, aluminum, plastic, wood, and other non-ferrous metals, widely used in various parts of machinery such as gears, bearings, bushings, etc..
- Straight Flute Reamer: Allows chips and debris to escape easily from the hole, well suited for most applications in shallow cuts. Can achieve the required roundness, straightness, and concentricity of the hole.
- Machine Reamer: Used in drilling machines, milling machines, lathes, and machining centers. Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
- Uncoated Reamer Drill Bit: Features just the base substrate without any additional coatings, used on a wide range of materials, including aluminum, brass, copper, mild steel, plastics and composites. Tapping fluid or cutting oil can be used to lubricate the reamer and workpiece to help reduce friction and increase tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #23
HSS Valve Stem Guide Reamers Spiral Fixed 5.5MM - 4" Long I Made In India I Valve Guide Reamer
Asin: B08PVBDV51 | Model: HSSVGR4A | PartNumber: HSSVGR4A
Squared Head - Fixed Reamer.
Made In India.
Hss Reamer Spiral Type.
Features
- HSS VALVE GUIDE REAMER - 5.5MM - 4" LONG
- HSS REAMER SPIRAL TYPE
- SQUARED HEAD - FIXED REAMER
- MADE IN INDIA
- See more on Amazon...
Brand: AI | Manufacturer: OMEX
See On Amazon #24
Yunnergo Optional M2 HSS Taper Chucking Reamer Set 4Pcs 3/8" 1/2" 5/8" 3/4", Single 1", 7/8", 7/16" for Aligning Existing Holes&Expanding Holes (Set 3/8 1/2 5/8 3/4 with 3/8 or 1/2 Shank Chuck)
Asin: B0CGT84B9F
Usage: Align The Drill Bit With The Position Where The Hole Needs To Be Drilled, Align The Existing Hole And Enlarge Hole To Ensure Stability, And Stop Cutting In A Timely Manner According To The Required Depth Of The Hole. Note: It Requires An Existing Hole Or A Guide Hole.
Widely Used: Suitable For Various Materials, Including Solid Wood, Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, And Steel. It Is Also Suitable For Other Fields, Such As Construction, Decoration, Bridge, Steel Structure Installation, And Manual Production.
This Product Has Multiple Models To Choose From, Please Check The Model To Purchase. Chucking Reamer Set Or Single Optional Hss Drill Bridge/Construction Reamer.
Advantages: The Point Is Tapered To Allow Entry Into Overlapping Holes, And The Spiral Groove Can Easily Remove Debris. It Is Made Of High-Quality Hss Material, Which Has High Hardness And Durability.
Features
- Drill bridge/construction reamer is a tool used for construction reaming, consisting of a drill bit reamer and a shank, which can accurately cut and form the required hole
- Advantages: The point is tapered to allow entry into overlapping holes, and the spiral groove can easily remove debris. It is made of high-quality HSS material, which has high hardness and durability
- Usage: Align the drill bit with the position where the hole needs to be drilled, align the existing hole and enlarge hole to ensure stability, and stop cutting in a timely manner according to the required depth of the hole. Note: It requires an existing hole or a guide hole
- This product has multiple models to choose from, please check the model to purchase. Chucking reamer set or single optional Hss drill bridge/construction reamer
- Widely used: Suitable for various materials, including solid wood, aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, and steel. It is also suitable for other fields, such as construction, decoration, bridge, steel structure installation, and manual production
- See more on Amazon...
Brand: Yunnergo | Manufacturer: Yunnergo
See On Amazon #25
uxcell 2mm Chucking Reamer, Tungsten Carbide Lathe Machine Reamer H7 4 Straight Flutes, Round Shank Milling Cutting Tool, for Stainless Steel Alloy Copper Metal
Asin: B08FB78YZY | Model: a19120900ux0885 | PartNumber: a19120900ux0885
Round Shank: Can Be Used With A Wide Variety Of Tool Holding Systems. Good For Use In Through Or Blind Holes And Used For Light Cut, Repair Work, Removing Stock.
Application: Designed For Accurate Reaming In Stainless Steel, Alloy Steel And Other Metal Materials, Used On Equipment Including Screw Machines, Turret Lathes, Drill Presses And Machining Centers. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tool Allows Chips To Collect In The Flutes When Cutting, Well Suited For Applications In Shallow Cuts. Tungsten Carbide Reamer Is With High Hardness And Strong Wear Resistance For Long Service Life.
Uncoated Tool: Features Just The Base Substrate Without Any Additional Treatment Or Coatings. Heat Treated And Quenched For Stable Performance, Suitable For Wide Ranges Of Applications.
Features
- Specifications: Cutting dia.: 2mm / 0.08"; tool flute length: 25mm / 1.0"; overall length: 50mm / 2.0"; accuracy: H7. Tungsten carbide tool is hardened to 50HRC, good for general purpose applications
- Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications
- Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock
- Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for applications in shallow cuts. Tungsten carbide reamer is with high hardness and strong wear resistance for long service life
- Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #26
uxcell Chucking Reamer, 1.5mm C3/K10 Tungsten Carbide H7 Accuracy Lathe Machine Reamer 4 Straight Flutes Milling Cutter
Asin: B09VXN3FZ8 | Model: a22012300ux0162 | PartNumber: a22012300ux0162
Straight Flute: Straight Flute Reamers Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts. Suitable For Use In Through Holes Or Blind Holes Without Interruption, Such As Keyways..
Round Shank: Round Shank Can Be Used With A Wide Variety Of Tool Holding Systems. Should Held In A Good-Quality Toolholder In Order To Prevent The Reamer From Slipping In High Torque Applications..
Easy To Use: Use On All Types Of Equipment Including Screw Machines, Turret Lathes, Drill Presses And Machining Centers. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Wide Applications: Widely Used For Processing, And Bore Machining. Designed For Accurate Reaming In Stainless Steel, Aluminum, Cast Iron, Copper, Alloy Steel, Die Steel, Tool Steel, Plastic, Wood. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes..
Features
- Chucking Reamers: Cutting Diameter: 1.5mm / 0.059"; Accuracy Class: H7; Cutting Hardness (Max.): HRC45. C3/ K10 tungsten carbide tool is with high hardness (HRC92), good toughness, wear resistance, high heat resistance, and anti-sticking. For most general purpose applications.
- Wide Applications: Widely used for processing, and bore machining. Designed for accurate reaming in stainless steel, aluminum, cast iron, copper, alloy steel, die steel, tool steel, plastic, wood. Great for light cut, repair work, or simply for enlarging holes.
- Straight Flute: Straight flute reamers allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts. Suitable for use in through holes or blind holes without interruption, such as keyways.
- Easy to Use: Use on all types of equipment including screw machines, turret lathes, drill presses and machining centers. Always keep reamers clean, and used with machine oil for long service use.
- Round Shank: Round shank can be used with a wide variety of tool holding systems. Should held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #27
Kimllier 10Pcs Chucking Reamer Set 3-12mm HSS H7 Reamer Set Cutter Milling Reamer Kit for Lathe Machine
Asin: B09VXK372N | Model: Does not apply | PartNumber: Does not apply
Reamer Group Is Sharp Cutting-Edge Reamer Group, High Precision, Strong Cutting Ability..
Reamer Set Can Be Used For Hole Processing, Reaming And Handicraft Processing, Can Be Precise Processing Of Steel, Plastic, Wood, Etc. It Can Be Installed On The Drilling Machine And Other Equipment..
The Reamer Is A Straight Flute Universal Handle With A Wide Range Of Use..
The Chucking Reamer Set Is Made Of High Quality High Speed Steel With High Hardness And Good Wear Resistance And Heat Resistance..
Features
- Shank diameter of reamer set were 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, precision is H7.
- The chucking reamer set is made of high quality high speed steel with high hardness and good wear resistance and heat resistance.
- Reamer group is sharp cutting-edge reamer group, high precision, strong cutting ability.
- The reamer is a straight flute universal handle with a wide range of use.
- Reamer set can be used for hole processing, reaming and handicraft processing, can be precise processing of steel, plastic, wood, etc. It can be installed on the drilling machine and other equipment.
- See more on Amazon...
Brand: Kimllier | Manufacturer: Kimllier
Dimensions: 1.18 x 6.89 x 2.68 inches
See On Amazon #28
uxcell 4.4mm Chucking Reamer, HSS Cobalt M35 Lathe Machine Reamer D4 6 Straight Flutes, Round Shank Milling Cutting Tool, for Stainless Steel Alloy Copper Metal, 2pcs
Asin: B08F9TCGJ4 | Model: a19112600ux0365 | PartNumber: a19112600ux0365
Round Shank: Can Be Used With A Wide Variety Of Tool Holding Systems. Good For Use In Through Or Blind Holes And Used For Light Cut, Repair Work, Removing Stock.
Application: Designed For Accurate Reaming In Stainless Steel, Alloy Steel And Other Metal Materials, Used On Equipment Including Screw Machines, Turret Lathes, Drill Presses And Machining Centers.
Features: Straight Flute Tool Allows Chips To Collect In The Flutes When Cutting, Well Suited For Most Applications In Shallow Cuts. Reamer Is With High Hardness, Toughness, Wear Resistance, Long Service Life.
Uncoated Tool: Features Just The Base Substrate Without Any Additional Treatment Or Coatings. Heat Treated And Quenched For Stable Performance, Suitable For Wide Ranges Of Applications.
Features
- Specifications: Cutting dia.: 4.4mm / 0.17"; tool flute length: 17.5mm / 0.69"; overall length: 85mm / 3.35"; accuracy: D4. High-speed steel tool with cobalt is good for general purpose applications
- Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications
- Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock
- Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Reamer is with high hardness, toughness, wear resistance, long service life
- Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #29
Yohii 16mm Reamer, 5/8 Inches Cutting Dia Hand Straight Shank HSS Chucking Reamer Milling Cutter Tool
Asin: B07X2P6SPP | Model: DCW1908070036 | PartNumber: DCW1908070036 | Ean: 0745695606525 | UPC: 745695606525
Dimension - Cutting Diameter: 16Mm/5/8"; Overall Length: 160Mm/6.3"; Flute Length: 100Mm/3.9"; Shank Length: 60Mm/2.4".
Application - Straight Shank Reamers Suitable Drilling Hole For Aluminum, Cast Iron, Copper, Magnesium Alloy, Plastic, Wood, Etc..
Longer Lifer - Straight Groove Reamer Reduces Reaming Resistance, Reduces Heat Generation And Prolongs Service Life..
High Hardness - The Drilling Accuracy Reaches H7 Level, And Reduce Workpieces Surface Roughness..
Features
- MATERIAL - The Straight Reamer is made of High Speed Steel.
- HIGH HARDNESS - The drilling accuracy reaches H7 level, and reduce workpieces surface roughness.
- DIMENSION - Cutting Diameter: 16mm/5/8; Overall Length: 160mm/6.3; Flute Length: 100mm/3.9; Shank Length: 60mm/2.4
- LONGER LIFER - Straight groove reamer reduces reaming resistance, reduces heat generation and prolongs service life.
- APPLICATION - Straight shank reamers suitable drilling hole for aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc.
- See more on Amazon...
Brand: Yohii | Manufacturer: Yohii
See On Amazon
Looking For Something Else?
Search