Best soldering & brazing equipment - Buying Guide
Last Updated: 05/04/2024
Share on
Bestselling soldering & brazing equipment on Amazon
- SEEKONE Heat Gun 1800W 122 ~1202 50 - 650 Fast Heating Heavy Duty Hot Air Gun Kit Variable Tempera...
- Soldering Iron Kit, 60W Soldering Iron with Interchangeable Iron Tips, 10-in-1 Adjustable Temperatur...
- Soldering Iron Kit - 60W Soldering Iron Adjustable Temperature, Solder Wire, Tweezers, Soldering Iro...
- SEEKONE Mini Heat Gun, 350W 662 (350 ) Fast Heat Handheld Hot Air Gun Tool with Reflector Nozzle an...
- Heat Gun, 1800W Heavy Duty Hot Air Gun Kit Dual Temperature Settings 572 ~932 (300 -500 ), Overload...
- Lesnow solder wick braid 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Cl...
- ravs Butane Torch Lighter,DUAL Flame Mode Kitchen Torch Cooking Torches, Refillable Butane for Torch...
- SRA Solder 135 Rosin Paste Soldering Flux For Electronics, No Clean Flux Made for Lead and Lead-Free...
- MAIYUM 63-37 Tin Lead Rosin Core Solder Wire for Electrical Soldering (0.8mm 50g)
- 2 Jar Solder Flux, Flux for Soldering, Rosin Soldering Flux Paste for Lead-Free Electronics Solderin...
#1
SEEKONE Heat Gun 1800W 122 ~1202 50 - 650 Fast Heating Heavy Duty Hot Air Gun Kit Variable Temperature Control Overload Protection with 4 Nozzles for Crafts, Shrinking PVC, Stripping Paint(5.2FT)
Asin: B078S5QMFG | Model: Heat Gun 1800W | PartNumber: Heat Gun 1800W | Ean: 0785421039999 | UPC: 785421039999
▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone Heat Gun Has A Scientific Ergonomic Design Handle Can Prevent Repetitive Strain Injuries And Other Musculoskeletal Disorders; Ideal Use For Shrinking Heat Shrink Tube, Shrinking Wrap, Heating Pvc, Electronics, Cell Phone Repairs, Removing Paint Or Floor Tiles, Loosening Rusted Bolts, And Other Heating Or Thawing Purpose.
▶ 【100% Satisfaction Guarantee】 Full Refund Or Return Guarantee With Lifetime Free Warranty. Anything Happened About The Product, Please Feel Free To Contact Us At Any Time, We Will Be Always Here For You.
▶ 【Four Nozzles Accessories】 Deflector Nozzle Directs A Long, Narrow Heat Pattern To The Work Surface; Two Concentrator Nozzles Direct A Concentrated Heat Flow To The Work Surface; Reflector Nozzle Disperses Heat Flow Evenly Around The Whole Work Surface..
▶ 【Variable Temp Control & Overload Protection】 Unlike Other Dual Temperature Heat Guns, Our Heat Guns Provide Variable Temperature Control. The Black Dial Provides Rheostat-Type Heating, The High / Low Switch On Its Handle Provides Air Flow Control. Temperature Range From 122℉ To 1202℉; Our Heat Gun Also Possess Overload Protector To Avoid Damaging Your Heat Gun And Circuit.
Features
- Strong Power With 2 Modes SEEKONE 1800W heat gun provides strong power quickly heat up to 1202 (650 ) in 1.5 seconds. Two modes: I: 50-450 , 190-210L/min; II: 50-650 , 250-500L/min
- Variable Temp Control & Overload Protection Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 122 to 1202 ; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
- Scientific Ergonomic Design & Wide Applications Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
- Four Nozzles Accessories Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface.
- 100% Satisfaction Guarantee Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you
- See more on Amazon...
Brand: SEEKONE | Manufacturer: SEEKONE
Dimensions: 1.50 x 9.76 x 7.22 Inches | Weight: 1.98 pounds
See On Amazon #2
Soldering Iron Kit, 60W Soldering Iron with Interchangeable Iron Tips, 10-in-1 Adjustable Temperature Soldering Welding Iron Kit for any Hobby Enthusiast 110V US Plug
Asin: B087767KNW | Ean: 0769135766761, 0751753812272 | UPC: 751753812272, 769135766761
【Must-Have Soldering Iron Kit】Kit Includes Soldering Iron, Simple Stand, Conventional Sponge, 5Pcs Interchangeable Solder Tips, Fine 0.6Mm Solder Wire, No-Clean Solder Rosin Flux Paste. It Has All The Materials You Need To Get Started..
【Portable Kit & Quality Service 】Compared With Soldering Iron Station, Our Soldering Gun Kit Is Portable To Carry, Just Plug Then Use. Also, All Mingq Products Are Backed 2-Year Warranty Guarantee And Lifetime Customer Support..
【Wide Application】Widely Used For Welding Circuit Board, Appliance Repair, Jewelry And Metal Headdress Making, Computer, And Diy. Perfect For Beginners, Welders, Basic Household Equipment, Welding Engineer Training, Etc. Excellent Gifts For Fathers Day!.
【Heats Up Quickly & Heat Dissipation Efficiently 】Our Soldering Iron Adopts The Advanced Ceramic Heating Core To Heat Up To Reach The Desired Temperature Within 15 Secs. Four Ventilation Holes On The Solder Iron, Reducing The Temperature Conducted From The Tip To The Handle..
Features
- Professional Function Design This 60w 110v pencil-type soldering iron features adjustable temperatures(392 -842 /200-450 ) and thermostatic setting. In addition, our soldering iron with ON/OFF Switch, which is easy to save energy and ensure safe welding.
- Heats Up Quickly & Heat Dissipation Efficiently Our soldering iron adopts the advanced ceramic heating core to heat up to reach the desired temperature within 15 secs. Four ventilation holes on the solder iron, reducing the temperature conducted from the tip to the handle.
- Must-Have Soldering Iron Kit Kit Includes soldering iron, simple stand, conventional sponge, 5pcs interchangeable solder tips, fine 0.6mm solder wire, no-clean solder rosin flux paste. It has all the materials you need to get started.
- Wide Application Widely used for welding circuit board, appliance repair, jewelry and metal headdress making, computer, and DIY. Perfect for beginners, welders, basic household equipment, welding engineer training, etc. Excellent Gifts for Fathers Day!
- Portable kit & Quality service Compared with soldering iron station, our soldering gun kit is portable to carry, just plug then use. Also, all MINGQ products are backed 2-year warranty guarantee and lifetime customer support.
- See more on Amazon...
Brand: Q-MING | Manufacturer: MINGQ
Dimensions: 1.97 x 10.43 x 5.71 inches
See On Amazon #3
Soldering Iron Kit - 60W Soldering Iron Adjustable Temperature, Solder Wire, Tweezers, Soldering Iron Stand, 5 pcs Solder Tips, Desoldering Pump, Solder Wick, Heatshrink Tubes [110 V, US Plug]
Asin: B07GTGGLXN | Model: Model 9160 | PartNumber: Model 9160 | Ean: 0721248989239 | UPC: 721248989239
Bonus Accessories – More Than 15 Extra Items Such As Desoldering Pump/Solder Sucker, Tin Wire Solder Tube, Tweezers, Mini Wire Stripper, Mini Screwdrivers, Mini Pcb, Heat Shrink Tubes And More Plus A Downloadable Ebook.
Satisfaction Guarantee – Every Purchase Is Backed By The Manufacturer’S 30-Day Money-Back / Replacement Guarantee And Lifetime Customer Support, Ensuring The Customers’ High Level Of Satisfaction.
Durable And Convenient Carry Bag – Assorted Tools Come Handy In A Durable Easy-To-Carry Pu Bag; Keeps All The Components Organized, Easy To Carry, Store And Transport Anywhere; Everything You Wanted In A Home Diy Do-It-Yourself Package.
Premium Quality Components With Safety Features – High Quality Soldering Iron, Stand And All Other Accessories; Soldering Iron With Adjustable Temperature Knob (200℃ - 450℃), 5Pcs Replaceable Tips, Heat-Resistant Cap And Grip For Maximum Protection.
Features
- Soldering Iron Kit for many applications necessary tools for soldering projects, home DIY fixing jobs, electrical, electronics and appliance repairs, circuit board welding, for home DIY hobbyist in crafts and jewelry making and many more uses
- Premium Quality Components with safety features high quality soldering iron, stand and all other accessories; soldering iron with adjustable temperature knob (200 - 450 ), 5pcs replaceable tips, heat-resistant cap and grip for maximum protection
- Bonus Accessories more than 15 extra items such as desoldering pump/solder sucker, tin wire solder tube, tweezers, mini wire stripper, mini screwdrivers, mini PCB, heat shrink tubes and more plus a downloadable ebook
- Durable and Convenient Carry Bag assorted tools come handy in a durable easy-to-carry PU bag; keeps all the components organized, easy to carry, store and transport anywhere; everything you wanted in a home DIY do-it-yourself package
- Satisfaction Guarantee every purchase is backed by the manufacturer s 30-day money-back / replacement guarantee and lifetime customer support, ensuring the customers high level of satisfaction
- See more on Amazon...
Brand: Plusivo | Manufacturer: WiderCable
Dimensions: 1.77 x 10.43 x 5.71 Inches | Weight: 1.00 pounds
See On Amazon #4
SEEKONE Mini Heat Gun, 350W 662 (350 ) Fast Heat Handheld Hot Air Gun Tool with Reflector Nozzle and 4.9Ft Long Cable Overload Protection for Craft Embossing, Shrink Wrapping and Stripping Paint
Asin: B08VFY8THD | Model: HG-350 | PartNumber: HG-350
★【Ergonomic Design】: Pencil-Like Design And Light Weight Make The Hot Air Gun Fit Comfortably In Your Hand. And The Mini Heat Gun Is Especially Ideal For Getting Into Hard-To-Reach Places And Concentrating High Heat On The Tight Area. Retractable Bracket Lets This Heat Shrink Gun Stand On The Table Stably And Use It Hands-Free..
★【What You Get】:1 X 350W Heat Gun, 1 X Reflector Nozzle, 1 X User Manual, Our Worry-Free And Friendly Customer Service. Anything Happened About The Product, Please Feel Free To Contact Our Team At Any Time, We Will Be Always Here For You..
★ 【Versatile Application】: Wide Use And Perfect For Diy Projects. This Mini Heat Gun Can Be Used For Shrink Wrapping, Soldering, Paint Removing, Air Bubble Removing, Candle Making, Electronics Repairing, Watercolor Drying, Defrosting And So On. If You Like Diy, It Is A Great Tool For You To Make Your Own Handmade Work..
★【Premium Quality & Safe】: Built In Over-Heat Protection, The Current Of This Heat Gun Tool Will Be Cut Off Automatically When Temperature Is Overheated To Avoid Melting And Fire. Made Of High Quality Impact-Resistant Pa6+30Gf Body And With Nozzle Safety Shield To Ensure Maximum Security For You..
Features
- HIGH POWER TOOL : Electric mini heat gun with 3.0Amp motor can reach temperature 662 (350 and air flow 300L/min within seconds to make your work more efficiently. 4.9ft ultra long cable helps you do crafting in large area more conveniently.
- PREMIUM QUALITY & SAFE : Built in over-heat protection, the current of this heat gun tool will be cut off automatically when temperature is overheated to avoid melting and fire. Made of high quality impact-resistant PA6+30GF body and with nozzle safety shield to ensure maximum security for you.
- ERGONOMIC DESIGN : Pencil-like design and light weight make the hot air gun fit comfortably in your hand. And the mini heat gun is especially ideal for getting into hard-to-reach places and concentrating high heat on the tight area. Retractable bracket lets this heat shrink gun stand on the table stably and use it hands-free.
- VERSATILE APPLICATION : Wide use and perfect for DIY projects. This mini heat gun can be used for shrink wrapping, soldering, paint removing, air bubble removing, candle making, electronics repairing, watercolor drying, defrosting and so on. If you like DIY, it is a great tool for you to make your own handmade work.
- WHAT YOU GET :1 x 350W Heat Gun, 1 x Reflector Nozzle, 1 x User Manual, our worry-free and friendly customer service. Anything happened about the product, please feel free to contact our team at any time, we will be always here for you.
- See more on Amazon...
Brand: SEEKONE | Manufacturer: Dongguan Futuo Electronic Tools Co., Ltd.
Dimensions: 2.76 x 10.43 x 3.35 inches | Weight: 0.86 Pounds
See On Amazon #5
Heat Gun, 1800W Heavy Duty Hot Air Gun Kit Dual Temperature Settings 572 ~932 (300 -500 ), Overload Protection with 4 Nozzles for Crafts, Shrink Wrapping/Tubing, Paint Removing, Epoxy Resin
Asin: B0BRK5TFNB | Model: R003 | PartNumber: R003
▶Long Service Life & Ergonomic Design: Heat Gun Is Made Of High Quality Abs Plastic Shell And Stainless Steel Air Outlet,Encased In A High-Durability Shell.Oxidation Heating Wire, Fan,Mica Board Along With All-Copper Motor,Which Are Resistant To High Temperature,Corrosion And A Long-Lasting Service Life. Fire Gun Has A Scientific Ergonomic Design Handle Which Prevent Repetitive Strain Injuries And Other Musculoskeletal Disorders; Comfortable Grip And Integrated Standing For Easy Operation..
▶100% Satisfaction Guarantee: Noted That The Heat Gun Will Emit White Smoke In A Short Time After First Time Starting Up,Which Is A Normal Phenomenon.It Can Operate In Us 110/120V. Support Full Refund Or Replacement In 7 Days,1 Year Quality Guarantee. Anything Happened About The Heatgun, Please Feel Free To Contact Us At Any Time, We Will Be Always Here For You..
❗Tips: It's Normal When It Is Used For The First Time, A Small Amount Of Glue Contained In The Built-In Mica Paper Will Dry Up And Produce Slight Smoke, The Smoke Will Disappear After 10 Minutes, Which Is Normal And Will Not Affect The Use Of The Heating Gun..
▶4 Versatile Accessories& Wide Applications: Heater Gun Comes With 4 Multi-Purpose Nozzles.Attachments Meet Different Application Needs.Great For Crafts,Shrink Wrapping,Epoxy Resin,Shrink Tubing,Cell Phone Repairs,Vinyl Wrap,Heating Pvc,Thawing Pipes,Paint Removal,Electronics Repair,Loosening Rusted Bolts, And Other Heating Or Thawing Purpose..
▶Dual Temp Control & Overload Protection: Acmyslat Heat Guns Provide Dual Temperature Control. Temperature Range From 572℉ To 932℉; Our Hot Air Gun Uses Qualified Material Which Can Quickly Cool Down The Material In High Temperature; This Heatgun Also Possess Overload Protector To Avoid Damaging Your Solder Heat Gun And Circuit..
Features
- Strong Power With 2 Modes: 1800W heat gun provides strong power to quickly heat up to 932 (500 ) in seconds. Two modes: I: 572 /300 , 250L/min; II: 932 /500 , 500L/min. This hot air gun heating fast in seconds easily to help complete DIY household home improvement tasks, please pay attention to safety when using the heatgun.
- Dual Temp Control & Overload Protection: AcmyslaT heat guns provide dual temperature control. Temperature range from 572 to 932 ; our hot air gun uses qualified material which can quickly cool down the material in high temperature; this heatgun also possess overload protector to avoid damaging your solder heat gun and circuit.
- Long Service Life & Ergonomic Design: Heat gun is made of high quality ABS plastic shell and stainless steel air outlet,encased in a high-durability shell.Oxidation heating wire, fan,mica board along with all-copper motor,which are resistant to high temperature,corrosion and a long-lasting service life. Fire gun has a scientific ergonomic design handle which prevent repetitive strain injuries and other musculoskeletal disorders; Comfortable grip and integrated standing for easy operation.
- 4 VERSATILE ACCESSORIES& Wide Applications: Heater Gun comes with 4 multi-purpose nozzles.Attachments meet different application needs.Great for crafts,shrink wrapping,epoxy resin,shrink tubing,cell phone repairs,vinyl wrap,heating PVC,thawing pipes,paint removal,electronics repair,loosening rusted bolts, and other heating or thawing purpose.
- 100% Satisfaction Guarantee: Noted that the heat gun will emit white smoke in a short time after first time starting up,which is a normal phenomenon.It can operate in US 110/120V. Support full refund or replacement in 7 days,1 year quality guarantee. Anything happened about the heatgun, please feel free to contact us at any time, we will be always here for you.
- Tips: It's normal when it is used for the first time, a small amount of glue contained in the built-in mica paper will dry up and produce slight smoke, the smoke will disappear after 10 minutes, which is normal and will not affect the use of the heating gun.
- See more on Amazon...
Brand: AcmyslaT | Manufacturer: AcmyslaT
Weight: 1.50 Pounds
Warranty: Support full refund or replacement in 7 days,1 year quality guarantee. Anything happened about the heatgun, please feel free to contact us at any time, we will be always here for you.
See On Amazon #6
Lesnow solder wick braid 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Clean soldering Wick Wire Roll and Disassemble Electrical Components
Asin: B094GZ6CPZ | Model: Lesnow-FT-01 | PartNumber: Lesnow-FT-01 | Ean: 0606727905286 | UPC: 606727905286
🌟This Desoldering Wick Has Geometrically-Precise Weave With Copper, Work From The Tip Of The Desoldering Wick, Once The Desoldering Wick And The Solder Has Been Heated, The Solder Braid Can Quickly Absorbed Molten Solder And Left A Clean Working Area..
🌟The Braided Solder Wicks Are Suitable For Labs, Home And Industry Welding Work, Practical Tools To Remove Solder And Correct Errors On Small Pcb Boards, Bringing Lots Of Convenience For Your Work.
🌟The Desoldering Wicks Are Made Of Copper Wires With Nice Quality, Precise Weaving Design Can Improve The Capillary Effect And The Redundant Solder Absorbing Ability, Increasing Your Efficiency.
🌟1 Pieces Of No-Clean Solder Wicks, Each Wick Is About 10Ft Long And 0.1 Inch In Width, Enough Quantity And Length For Your Daily Needs.
Features
- The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
- 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
- This desoldering wick has geometrically-precise weave with copper, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
- The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
- See more on Amazon...
Brand: Lesnow | Manufacturer: Lesnow-FT
Dimensions: 0.50 x 5.00 x 4.00 inches | Weight: 0.50 ounces
See On Amazon #7
ravs Butane Torch Lighter,DUAL Flame Mode Kitchen Torch Cooking Torches, Refillable Butane for Torch, Adjustable Flame Blow Torch, Mini Torch Micro Torch,Soldering Torch, Birthday Gifts for Men Unique
Asin: B0B5RKWNMS | Model: RBT018 | PartNumber: RBT018
[Multi-Purpose Butane Torch Lighters ] The Handheld Torch Is Suitable For Different Applications Including Gourmet Cooking, Arts And Crafts Projects, Jewelry Making, And Small Welding Applications. The Kitchen Butane Torch Is Easy To Use..
Note: 1. For Safe Shipping Butane Gas Isn’T Included. 2. When Using And Storing, Please Avoid Heavy Collisions And Drops. 3.It Is Recommended Not To Over-Inflate. The Recommended Inflation Time Is 10 Seconds. 4. The Functions Of The 3Pcs Butane Gas Adapter: A. Inflatable: For A Gas Tank With A Short Nozzle For An Extension. B. Deflate: Before Filling Again, Release The Gas In The Lighter To Better Extend The Service Life Of The Lighter And Torch. C. If The Gas In The Torch Is Not Pure Enough, You Need To Use This Tool To Remove The Gas From The Torch. Once Re-Gassed, You Will Have A Blue Flame Torch..
[ 2-Year Warranty] If You're Worried About Whether This Culinary Torch Is Right For You. Ravs Welding Torch Comes With A 2-Year Warranty!.
[ Great Gift ] The Ravs Butane Torch Lighter Is A Good Gift For Men And Women, Parents, And Friends. The Kitchen Torch Lighter For Creme Brulee Comes With A Gift Box. The Brulee Torch Is Great For Men's Gifts, Husband Gifts, And Gifts For Boyfriend..
[Refillable And Easy To Use ] Piezo Press Ignition Of The Mini Torch Provides Immediate And Fast Ignition And Allows One-Handed Operation. The Wide Copper Base Of The Food Torch Provides Great Support And Anti-Tipping. ➡ Note: The Soldering Torch Usually Takes 15 Seconds For Full Refilling (8-11G). Please Ensure To Turn Off The Flow Regulation Before Filling The Gas..
[ Dual Flame Torch Lighter ] The Butane Torch Gun Has A Precise Flame That Can Heat Items Faster. The 2 Flame Modes Of The Kitchen Torch Can Be Switched At Will（Turn The Flame Mode Knob To Switch). Turn The Flame Adjustment Knob To Adjust And Control The Size Of The Flame, Max Temperature Reach Up To 1300 °C/2372 °F. The Dual Flame Lighter Torch And Soft Can Meet Different Heating Needs..
Features
- [Portable Torch Lighter Gun] ravs cooking torch baking tools are made of quality metal material, which is more sturdy than plastic butane torches on the market. With an ergonomic design handle, the micro torch offers a great grip and stays cool.
- [ Dual Flame Torch Lighter ] The butane torch gun has a precise flame that can heat items faster. The 2 flame modes of the kitchen torch can be switched at will Turn the flame mode knob to switch). Turn the flame adjustment knob to adjust and control the size of the flame, Max temperature reach up to 1300 C/2372 F. The dual flame lighter torch and soft can meet different heating needs.
- [Multi-purpose Butane Torch Lighters ] The handheld torch is suitable for different applications including gourmet cooking, arts and crafts projects, jewelry making, and small welding applications. The kitchen butane torch is easy to use.
- [Refillable and Easy to Use ] Piezo press ignition of the mini torch provides immediate and fast ignition and allows one-handed operation. The wide copper base of the food torch provides great support and anti-tipping. NOTE: The soldering torch usually takes 15 seconds for full refilling (8-11g). Please ensure to turn off the flow regulation before filling the gas.
- [ 2-year Warranty] If you're worried about whether this culinary torch is right for you. ravs welding torch comes with a 2-year warranty!
- [ Great Gift ] The ravs butane torch lighter is a good gift for men and women, parents, and friends. The kitchen torch lighter for creme brulee comes with a gift box. The brulee torch is great for men's gifts, husband gifts, and gifts for boyfriend.
- Note: 1. For safe shipping butane gas isn t included. 2. When using and storing, please avoid heavy collisions and drops. 3.It is recommended not to over-inflate. The recommended inflation time is 10 seconds. 4. The functions of the 3pcs butane gas adapter: A. Inflatable: For a gas tank with a short nozzle for an extension. B. Deflate: Before filling again, release the gas in the lighter to better extend the service life of the lighter and torch. C. If the gas in the torch is not pure enough, you need to use this tool to remove the gas from the torch. Once re-gassed, you will have a blue flame torch.
- See more on Amazon...
Brand: ravs | Manufacturer: ravs
Dimensions: 5.68 x 2.50 x 1.80 inches | Weight: 0.62 Pounds
See On Amazon #8
SRA Solder 135 Rosin Paste Soldering Flux For Electronics, No Clean Flux Made for Lead and Lead-Free Solder Circuit Boards and Copper Electrical Wire - Safe Clean Residues with No Goopy Mess (2oz Jar)
Asin: B008ZIV85A | Model: FLS135 | PartNumber: FLS135 | Ean: 0022099136705, 7294104404335, 0785533219975 | UPC: 785533219975, 022099136705
Electric Solder Flux - Unlike Paste Flux Wax Found At The Hardware Store, Sra 135 Acid Free Electronics Soldering Flux Is The Safe And Effective Choice For Electrical And Electronic Applications..
Flux For Soldering Diy Electronics Projects Including Car Audio, Stereo & Hifi, Computers, Rc Vehicles, Drones / Fpv, Musical Instruments, Gaming Consoles, Model Railroad, Arduino / Raspberry Pi, Etc..
Flux Specifications - 135 Is A Type Ra (Rosen Activated) Flux With An Active Temp. Range Of 93 – 315°C / 200 – 600°F. This Listing Is For One 2Oz (56.6G) Jar Of Electrical Flux Paste..
No Goop Solder Flux - Semi-Solid Solder Wax Consistency Gives You Superior Control Over Application. Simply Dip Copper Electric Wires Or Apply Electronic Rosin Flux To Pcb And Watch The Solder Flow!.
Features
- USA Quality Flux - Achieve the soldering results you desire with SRA 135. Our rosin paste flux is impurity free with superior solder flux paste wetting performance. Rosin flux soldering perfected.
- No Goop Solder Flux - Semi-solid solder wax consistency gives you superior control over application. Simply dip copper electric wires or apply electronic rosin flux to PCB and watch the solder flow!
- Electric Solder Flux - Unlike paste flux wax found at the hardware store, SRA 135 acid free electronics soldering flux is the safe and effective choice for electrical and electronic applications.
- Flux Specifications - 135 is a type RA (Rosen Activated) Flux with an Active Temp. Range of 93 315 C / 200 600 F. This listing is for one 2oz (56.6g) jar of electrical flux paste.
- Flux for soldering DIY electronics projects including Car Audio, Stereo & Hifi, Computers, RC Vehicles, Drones / FPV, Musical Instruments, Gaming Consoles, Model Railroad, Arduino / Raspberry Pi, etc.
- See more on Amazon...
Brand: SRA Soldering Products | Manufacturer: SRA Soldering Products
Dimensions: 3.00 x 3.00 x 1.00 inches | Weight: 0.13 pounds
See On Amazon #9
MAIYUM 63-37 Tin Lead Rosin Core Solder Wire for Electrical Soldering (0.8mm 50g)
Asin: B075WB98FJ | Model: JF850 | PartNumber: JF850 | Ean: 0765470166723 | UPC: 765470166723
√ Flux Content 1.8%，Electrical Soldering Wire Dia Is 0.8Mm (0.0315Inch)，Gross Weight 50Gram (0.11Lbs),Good Size For Pocket.
√ Applications: Very Good Soldering Capability, Esp For Circuit Board, Diy, Home Improvement, Repairation Of Cable/Tv/Radio/Sterro/ Toys And Other Electrical Devices Etc. (Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Brith Defects Or Other Reproductive Harm. For More Information Go To The Offical Proposition 65 Warnings Website).
√ Low Melting Point: 361F/183C. Easy To Be Soldered, Flows Smoothly, Soldering Fast And Strong Soldering Point..
√ Parameters: Solder Wire Tin 63.
Features
- Tin Lead Solder Wire: High Quality Rosin Core Solder Wire
- Parameters: solder wire Tin 63
- Flux content 1.8% electrical soldering wire dia is 0.8mm (0.0315inch) gross weight 50gram (0.11lbs),good size for pocket
- Low Melting Point: 361F/183C. easy to be soldered, flows smoothly, soldering fast and strong soldering point.
- Applications: Very good soldering capability, esp for circuit board, DIY, home improvement, Repairation of cable/TV/Radio/sterro/ Toys and other electrical devices etc. (WARNING: This product can expose you to lead, which is known to the State of California to cause brith defects or other reproductive harm. For more information go to the offical Proposition 65 Warnings Website)
- See more on Amazon...
Brand: MAIYUM | Manufacturer: Shenzhen Joycefook Technology Co., Ltd
Dimensions: 2.17 x 2.17 x 1.18 inches | Weight: 0.12 Pounds
See On Amazon #10
2 Jar Solder Flux, Flux for Soldering, Rosin Soldering Flux Paste for Lead-Free Electronics Soldering and Soldering DIY (1.2oz/35g in a Jar)
Asin: B08MVXW4RY | Ean: 0727380271850 | UPC: 727380271850
Oxidation Resistance: Anti-Oxidation Effect On Soldering Iron Head Of Gold-Copper Alloy Substrate. Solder Flux For Semi-Solid, Not Easy To Dump..
What You Get: Rosin Soldering Flux Paste * 2, Our 7*24 Friendly Customer Service For Peace Of Mind..
Strong Applicability: Flux Is Suitable For Welding Instruments, Gold, Copper, Tin, Iron And Other Metals. Ideal For Electronic Welding, Repair And Rework..
Non-Corrosive: Rosin Is Not Conductive In Dry Conditions And Has Good Insulation. Is Not Corrosive To Metal Substances Such As Circuit Boards..
Features
- ENOUGHT QUANTITY: The package includes 2 jars of soldering flux. A total of 70 g. Enough quantity for your use.
- NON-CORROSIVE: Rosin is not conductive in dry conditions and has good insulation. Is not corrosive to metal substances such as circuit boards.
- OXIDATION RESISTANCE: Anti-oxidation effect on soldering iron head of gold-copper alloy substrate. Solder flux for semi-solid, not easy to dump.
- STRONG APPLICABILITY: Flux is suitable for welding instruments, gold, copper, tin, iron and other metals. Ideal for electronic welding, repair and rework.
- WHAT YOU GET: Rosin soldering flux paste * 2, our 7*24 friendly customer service for peace of mind.
- See more on Amazon...
Brand: Romeda | Manufacturer: Romeda
See On Amazon #11
KTELI P36 Soldering Station Conical Bevel 60W Solder Iron Tip 10Pcs
Asin: B0D38J5XN4 | Ean: 4861114269969
Product Name : Soldering Iron Tip;Material : Metal;Design : Conical, Bevel.
Weight : 60G.
Shank Diameter : 6.6Mm/ 0.26 Inch;Conical Tip Diameter : 0.8Mm/ 0.03 Inch, 1Mm/ 0.04 Inch, 1.8Mm/ 0.07 Inch.
Power : 60W;Total Length : 4Cm/ 1.6 Inch, 4.2Cm/ 1.7 Inch, 4.4Cm/ 1.73 Inch,,4.1Cm/ 1.61 Inch, 4.1Cm/ 1.61 Inch.
Features
- Bevel Tip Width : 4mm/ 0.16 inch, 6mm/ 0.24 inch;Color : Silver Tone
- Power : 60W;Total Length : 4cm/ 1.6 inch, 4.2cm/ 1.7 inch, 4.4cm/ 1.73 inch,,4.1cm/ 1.61 inch, 4.1cm/ 1.61 inch
- Product Name : Soldering Iron Tip;Material : Metal;Design : Conical, Bevel
- Shank Diameter : 6.6mm/ 0.26 inch;Conical Tip Diameter : 0.8mm/ 0.03 inch, 1mm/ 0.04 inch, 1.8mm/ 0.07 inch
- Weight : 60g
- See more on Amazon...
Brand: KTELI | Manufacturer: KTELI
Dimensions: 0.39 x 2.36 x 1.57 inches | Weight: 0.11 Pounds
See On Amazon #12
HQHAOTWU Reflow Oven Reflow Soldering Machine Micro-processor Controlled Reflow Oven Professional Infrared Heater Soldering Machine Effective Soldering Area 15.7x23.6Inch Temperature 0-280 110V
Asin: B0D2MQYJQL | Model: DX022686 | PartNumber: DX022686 | Ean: 0840403768486 | UPC: 840403768486
【Considerate Design】The Infrared Heater Soldering Machine Is Equipped With 2 Vent Pipe Pre-Installed Interface, And The Smoke Exhaust Pipe Can Be Installed On The Back Of The Machine. User Interface Is Implemented By Way Of T962c Input Keys And An Lcd Display. Moreover, High Quality Slide Rail Design, Smooth Sliding And Pulling To Prevent Chip Displacement. Insulated Drawer Handle, Double-Layer Quartz Glass, Clear Internal Condition At A Glance.
【Wide Range Of Application】This Professional Automatic Infrared Heater Soldering Machine Is Equipped With Independent Smoke Exhaust And Cooling Channels, Facilitating Waste Gas Recovery. Widely Used In Various Industries Such As Home Appliances, Automotive Electronics, Power Drives, Led Lighting, Security Instruments And Meters, Etc.
【Parameter】 Rated Power: 2900W; Effective Soldering Max Area: 600 X 400 Mm (15.7 X 23.6 Inch); Power Supply: Ac110v/ 60Hz; Temperature Range: 0 - 280℃; Cycle Time: 1～9 Min; Size: 675 X 510 X 240 Mm ( 26.5 X 20 X 9.5 In ); Rated Duty Cycle: 100%.
【Precise Temperature Control】The Reflow Soldering Machine Is Preset With 8 Intelligent Temperature Control Curves. The Curve Display Operation Is More Intuitive Than The Digital Display, And The Operation Status Is Monitored In Real Time. Combined With Advanced Intelligent Temperature Measurement And Control Technology, Accurate Temperature Measurement And Precise Temperature Control.
Features
- Function This is a micro-processor controlled reflow oven, works automatically by micro-computer control. It can satisfy a dissimilarity SMD, BAG soldering a request on a PCB assembly. The reflow oven may be used to automatically re-flow solder to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes
- Precise Temperature Control The reflow soldering machine is preset with 8 intelligent temperature control curves. The curve display operation is more intuitive than the digital display, and the operation status is monitored in real time. Combined with advanced intelligent temperature measurement and control technology, accurate temperature measurement and precise temperature control
- Considerate Design The infrared heater soldering machine is equipped with 2 vent pipe pre-installed interface, and the smoke exhaust pipe can be installed on the back of the machine. User interface is implemented by way of T962C input keys and an LCD display. Moreover, high quality slide rail design, smooth sliding and pulling to prevent chip displacement. Insulated drawer handle, double-layer quartz glass, clear internal condition at a glance
- Parameter Rated power: 2900W; Effective Soldering max area: 600 x 400 mm (15.7 x 23.6 inch); Power supply: AC110V/ 60Hz; Temperature Range: 0 - 280 ; Cycle Time: 1 9 min; Size: 675 x 510 x 240 mm ( 26.5 x 20 x 9.5 in ); Rated Duty Cycle: 100%
- Wide Range of Application This professional automatic infrared heater soldering machine is equipped with independent smoke exhaust and cooling channels, facilitating waste gas recovery. Widely used in various industries such as home appliances, automotive electronics, power drives, LED lighting, security instruments and meters, etc
- See more on Amazon...
Brand: HQHAOTWU | Manufacturer: HQHAOTWU
Weight: 65.00 Pounds
See On Amazon #13
Kokiya 2X 8 Pieces Hollow Tip Desoldering Tool Electronic Components
Asin: B0D38F3H6P
Made Of Stainless Steel, It Is Not Sticking..
Use The Component Pin, Heated With A Soldering Iron, A Slight Rotation To The Component Lead And Copper Foil Separation..
The Is Used For Hardware Engineer To Desolder The Electronic Components..
7Pcs Hollow And 1Pcs Solid ，Comes With Case..
Features
- Configuration Size: 0.8 1.0 1.2 1.4 1.6 1.8 2.0mm
- 7Pcs Hollow and 1Pcs Solid comes with case.
- Made of stainless steel, it is not sticking.
- The is used for hardware engineer to desolder the Electronic components.
- Use the component pin, heated with a soldering iron, a slight rotation to the component lead and copper foil separation.
- See more on Amazon...
Brand: Kokiya | Manufacturer: Kokiya
See On Amazon #14
Kokiya 5x SOLDERING IRON LIGHTSABER BRASS WIRE CLEANING BALL TIP CLEANING
Asin: B0D38F6XLV
Easy To Use: When Use The Cleaning Ball, Please Put The Soldering Iron Head Into The Copper Wire To Clean The Solder..
Material: Iron Base Box & Pure Copper; Base Box Diameter: 65Mm; Base Box Height: 40Mm..
Uses: Widely Used In Electric Welding, Electrical Maintenance, Welding Parts, Etc..
Be Careful: Do Not Use The Copper Wire As A Sponge To Brush The Iron Head, Otherwise The Solder Wire Will Out And Hurt You. When Changing The Copper Wire, Please Wear The Gloves And Protect Yourself..
Features
- PACKAGE INCLUDES: 1X Soldering Tip Cleaning Ball & Base Box.
- BE CAREFUL: Do not use the copper wire as a sponge to brush the iron head, otherwise the solder wire will out and hurt you. When changing the copper wire, please wear the gloves and protect yourself.
- EASY TO USE: When use the cleaning ball, please put the soldering iron head into the copper wire to clean the solder.
- USES: widely used in electric welding, electrical maintenance, welding parts, etc.
- MATERIAL: Iron Base Box & Pure Copper; Base Box Diameter: 65mm; Base Box Height: 40mm.
- See more on Amazon...
Brand: Kokiya | Manufacturer: Kokiya
See On Amazon #15
Kokiya 3X 8 Pieces Hollow Tip Desoldering Tool Electronic Components
Asin: B0D38D7QMV
The Is Used For Hardware Engineer To Desolder The Electronic Components..
7Pcs Hollow And 1Pcs Solid ，Comes With Case..
Made Of Stainless Steel, It Is Not Sticking..
Configuration Size: 0.8 1.0 1.2 1.4 1.6 1.8 2.0Mm.
Features
- Use the component pin, heated with a soldering iron, a slight rotation to the component lead and copper foil separation.
- Configuration Size: 0.8 1.0 1.2 1.4 1.6 1.8 2.0mm
- The is used for hardware engineer to desolder the Electronic components.
- Made of stainless steel, it is not sticking.
- 7Pcs Hollow and 1Pcs Solid comes with case.
- See more on Amazon...
Brand: Kokiya | Manufacturer: Kokiya
See On Amazon #16
Kokiya 2x SOLDERING IRON LIGHTSABER BRASS WIRE CLEANING BALL TIP CLEANING
Asin: B0D38CLHRG
Easy To Use: When Use The Cleaning Ball, Please Put The Soldering Iron Head Into The Copper Wire To Clean The Solder..
Package Includes: 1X Soldering Tip Cleaning Ball & Base Box..
Be Careful: Do Not Use The Copper Wire As A Sponge To Brush The Iron Head, Otherwise The Solder Wire Will Out And Hurt You. When Changing The Copper Wire, Please Wear The Gloves And Protect Yourself..
Uses: Widely Used In Electric Welding, Electrical Maintenance, Welding Parts, Etc..
Features
- MATERIAL: Iron Base Box & Pure Copper; Base Box Diameter: 65mm; Base Box Height: 40mm.
- USES: widely used in electric welding, electrical maintenance, welding parts, etc.
- EASY TO USE: When use the cleaning ball, please put the soldering iron head into the copper wire to clean the solder.
- BE CAREFUL: Do not use the copper wire as a sponge to brush the iron head, otherwise the solder wire will out and hurt you. When changing the copper wire, please wear the gloves and protect yourself.
- PACKAGE INCLUDES: 1X Soldering Tip Cleaning Ball & Base Box.
- See more on Amazon...
Brand: Kokiya | Manufacturer: Kokiya
See On Amazon #17
Kokiya 4X 8 Pieces Hollow Tip Desoldering Tool Electronic Components
Asin: B0D38CF452
Configuration Size: 0.8 1.0 1.2 1.4 1.6 1.8 2.0Mm.
The Is Used For Hardware Engineer To Desolder The Electronic Components..
Use The Component Pin, Heated With A Soldering Iron, A Slight Rotation To The Component Lead And Copper Foil Separation..
Made Of Stainless Steel, It Is Not Sticking..
Features
- 7Pcs Hollow and 1Pcs Solid comes with case.
- Made of stainless steel, it is not sticking.
- Configuration Size: 0.8 1.0 1.2 1.4 1.6 1.8 2.0mm
- Use the component pin, heated with a soldering iron, a slight rotation to the component lead and copper foil separation.
- The is used for hardware engineer to desolder the Electronic components.
- See more on Amazon...
Brand: Kokiya | Manufacturer: Kokiya
See On Amazon #18
Kokiya 5X 8 Pieces Hollow Tip Desoldering Tool Electronic Components
Asin: B0D38F2WZS
Made Of Stainless Steel, It Is Not Sticking..
7Pcs Hollow And 1Pcs Solid ，Comes With Case..
Configuration Size: 0.8 1.0 1.2 1.4 1.6 1.8 2.0Mm.
Use The Component Pin, Heated With A Soldering Iron, A Slight Rotation To The Component Lead And Copper Foil Separation..
Features
- The is used for hardware engineer to desolder the Electronic components.
- Use the component pin, heated with a soldering iron, a slight rotation to the component lead and copper foil separation.
- Made of stainless steel, it is not sticking.
- Configuration Size: 0.8 1.0 1.2 1.4 1.6 1.8 2.0mm
- 7Pcs Hollow and 1Pcs Solid comes with case.
- See more on Amazon...
Brand: Kokiya | Manufacturer: Kokiya
See On Amazon #19
Kokiya 4x SOLDERING IRON LIGHTSABER BRASS WIRE CLEANING BALL TIP CLEANING
Asin: B0D38DF1TQ
Package Includes: 1X Soldering Tip Cleaning Ball & Base Box..
Material: Iron Base Box & Pure Copper; Base Box Diameter: 65Mm; Base Box Height: 40Mm..
Be Careful: Do Not Use The Copper Wire As A Sponge To Brush The Iron Head, Otherwise The Solder Wire Will Out And Hurt You. When Changing The Copper Wire, Please Wear The Gloves And Protect Yourself..
Easy To Use: When Use The Cleaning Ball, Please Put The Soldering Iron Head Into The Copper Wire To Clean The Solder..
Features
- USES: widely used in electric welding, electrical maintenance, welding parts, etc.
- EASY TO USE: When use the cleaning ball, please put the soldering iron head into the copper wire to clean the solder.
- PACKAGE INCLUDES: 1X Soldering Tip Cleaning Ball & Base Box.
- BE CAREFUL: Do not use the copper wire as a sponge to brush the iron head, otherwise the solder wire will out and hurt you. When changing the copper wire, please wear the gloves and protect yourself.
- MATERIAL: Iron Base Box & Pure Copper; Base Box Diameter: 65mm; Base Box Height: 40mm.
- See more on Amazon...
Brand: Kokiya | Manufacturer: Kokiya
See On Amazon #20
Kokiya 6X 8 Pieces Hollow Tip Desoldering Tool Electronic Components
Asin: B0D38GQ67G
7Pcs Hollow And 1Pcs Solid ，Comes With Case..
Use The Component Pin, Heated With A Soldering Iron, A Slight Rotation To The Component Lead And Copper Foil Separation..
Made Of Stainless Steel, It Is Not Sticking..
Configuration Size: 0.8 1.0 1.2 1.4 1.6 1.8 2.0Mm.
Features
- The is used for hardware engineer to desolder the Electronic components.
- Configuration Size: 0.8 1.0 1.2 1.4 1.6 1.8 2.0mm
- 7Pcs Hollow and 1Pcs Solid comes with case.
- Made of stainless steel, it is not sticking.
- Use the component pin, heated with a soldering iron, a slight rotation to the component lead and copper foil separation.
- See more on Amazon...
Brand: Kokiya | Manufacturer: Kokiya
See On Amazon #21
Hakko FR301-03/P Portable Desoldering Tool with Precise Temperature Control F / C & Texas Instruments TI-30XIIS Scientific Calculator, Black with Blue Accents
Asin: B0CW3742ZV
Product 1: Fast Release Tool For The Quick-Change Nozzle System.
Product 2: Easily Handles 1 And 2 Variable Statistical Calculations And Three Angle Modes (Degrees, Radians, And Grads) And Scientific And Engineering Falsetation Modes.
Product 2: Solar And Battery Powered.
Product 2: Robust, Professional Grade Scientific Calculator. Logs And Antilogs.
Product 2: It Has 2-Line Display Shows Entry And Calculated Result At Same Time.
Product 1: Closed-Loop Sensor Integrated Heating System For Improved Thermal Performanc.
Product 1: Easy-To-Clean Solder Recovery Chamber Minimizes Maintenance And Reduces Waste.
Features
- Product 1: Easy-To-Use Adjustable Temperature Control Built Into The Handle
- Product 1: Easy-To-Clean Solder Recovery Chamber Minimizes Maintenance And Reduces Waste
- Product 1: Fast Release Tool For The Quick-Change Nozzle System
- Product 1: Closed-Loop Sensor Integrated Heating System For Improved Thermal Performanc
- Product 2: Robust, professional grade scientific calculator. Logs and antilogs
- Product 2: It has 2-line display shows entry and calculated result at same time
- Product 2: Easily handles 1 and 2 variable statistical calculations and three angle modes (degrees, radians, and grads) and scientific and engineering Falsetation modes
- Product 2: Solar and battery powered
- See more on Amazon...
Brand: Hakko
See On Amazon #22
goot RX-80HRT-2.4SMD Replacement Soldering Tip, 2.4D Type, Tip Edge, Made in Japan
Asin: B0CKXJVNQD | Model: RX-80HRT-2.4SMD | PartNumber: RX-80HRT-2.4SMD | Ean: 4975205571098
The Soldering Iron Tip Is Easy To Apply To The Electrode Of Parts With Low Height Such As Small Chip Parts And Qfp Lead Terminals For Surface Mount Parts.
For Controlling The Amount Of Solder And Improving Workability.
The Ground Pattern Also Improves Thermal Conductivity.
Pointed Edge Shape Suitable For Soldering Micro Soldering.
Features
- Compatible models: RX-802AS, RX-812AS, RX-822AS, RX-852AS
- Pointed edge shape suitable for soldering micro soldering
- The soldering iron tip is easy to apply to the electrode of parts with low height such as small chip parts and QFP lead terminals for surface mount parts
- The ground pattern also improves thermal conductivity
- For controlling the amount of solder and improving workability
- See more on Amazon...
Brand: goot | Manufacturer: 太洋電機産業(goot)
See On Amazon #23
M3 Threaded Inserts for plastic-100Pcs M3x5.7x4.6 with Heat Set Insert Tools-Brass Metric Knurled Nuts for 3D Printing Components and Plastic Parts
Asin: B0CT3SGZ8X | Ean: 0720118893812 | UPC: 720118893812
M3 Is A Popular Size For Arduino Circuit Board Hole Installation. Not All M3 Inserts Have The Same Outer Diameter. So, Check Your Design With Your Plugin..
Using The Heat Pressing Machine Is More Conducive To Inserting Angles, Resulting In A Better Installation Experience.
Heat Set Insert Tips And M3 Inserts Work Closely Together, Making Them Easier To Use.
Heat-Set Insert Tips For Hakko Fx-888D/Weller Sp40nkus/900M And T18 For Example For Soldering Stations Sremtch, Hakko, Lonovo, Rhaegon, Waxrhyed And Other Brands. Dimensions Of The Soldering Iron Adapter Can Be Taken From The Drawing..
Features
- Applied to thread reinforcement of 3D printing components, it can enable repeated disassembly of 3D printing components, including one M3 Heat set Insert Tips and 100 M3x5.7x4.6 inserts
- Heat-set Insert Tips for Hakko FX-888D/Weller SP40NKUS/900M and T18 for example for soldering stations SREMTCH, Hakko, LONOVO, RHAEGON, WaxRhyed and other brands. Dimensions of the soldering iron adapter can be taken from the drawing.
- M3 is a popular size for Arduino circuit board hole installation. Not all M3 inserts have the same outer diameter. So, check your design with your plugin.
- Heat set Insert Tips and M3 inserts work closely together, making them easier to use
- Using the Heat Pressing Machine is more conducive to inserting angles, resulting in a better installation experience
- See more on Amazon...
Brand: 3DZWMAN | Manufacturer: 3DZWMAN
Dimensions: 0.22 x 0.18 x 0.18 inches
See On Amazon #24
Premium Heat Resistant 932 F 22"x 14.2" Magnetic Silicone Soldering Mat Electronics Work Mat for Computer Cell Phone Laptop Repair,BGA Soldering Gun Iron Workbench Protection
Asin: B0CKPGM2LH | Model: HPBIGMAT001 | PartNumber: HPBIGMAT001 | Ean: 0723509443108, 0723509442934, 0723509443115 | UPC: 723509442934, 723509443108, 723509443115
🥇-【High Temperature Heat Resistant 932°F 】The Soldering Repair Mat Withstand High Temperatures 932°F (500°C), Which Can Protect Your Desk From Burning And Ruining. And The Silicone Soldering Mat Is Anti-Weak Acid And Weak Base..
🥇-【100% Quality Satisfaction & Lifetime Warranty 】 This Silicone Soldering Work Mat Is Also A Best Tool Gift For Holiday Day. It's Designed For Disassembly Or Soldering Any Electronics You Need, Making It Easier For You To Remove And Install Electronic Equipment. This Product Provides A 180-Day Refund And Lifetime Warranty. If You Have Any Questions, Please Feel Free To Contact Us And We Will Get Back To You Within 24 Hours..
🥇-【Non-Toxic Odorless And Non-Slip】Silicone Material For Soldering Mat Is 100% Food Grade Which Meet Usa Fda Standard, Non-Toxic And Odorless. Both Surface And Back Side Of The Silicone Work Mat Are Non-Slip, It Won't Slide Around On Your Desk. This Ensures Precise And Stable Soldering, Reducing The Chances Of Mistakes Or Damage To Your Work..
🥇-【Keep Your Platform Clean And Tidy】 The Soldering Work Mat Come With Built-In Compartments, Trays, And Magnetic Areas To Hold Small Components, Tools, Or Screws. This Feature Helps You Keep Your Work Area Organized And Prevents The Loss Of Small Parts. It Also Saves Time And Improve Efficiency By Keeping Everything You Need Within Reach, That No Need To Search For Tools Or Components During The Soldering Process..
Features
- - Super Large Size for Convenience The Soldering Mat with large size 22'' x 14.2'', the working area is 21.5'' x 10.9'' providing super big space to satisfy your many projects needs, expecially for soldering and repairing larger items, such as computer motherboards, laptops, ipads, cameras, and other electronic products of different sizes.
- - Keep Your Platform Clean and Tidy The Soldering work mat come with built-in compartments, trays, and magnetic areas to hold small components, tools, or screws. This feature helps you keep your work area organized and prevents the loss of small parts. It also saves time and improve efficiency by keeping everything you need within reach, that no need to search for tools or components during the soldering process.
- - High Temperature Heat Resistant 932 F the soldering repair mat withstand high temperatures 932 F (500 C), which can protect your desk from burning and ruining. And the silicone soldering mat is anti-weak acid and weak base.
- - Non-toxic Odorless and Non-Slip Silicone material for soldering mat is 100% food grade which meet USA FDA standard, non-toxic and odorless. Both surface and back side of the silicone work mat are non-slip, it won't slide around on your desk. This ensures precise and stable soldering, reducing the chances of mistakes or damage to your work.
- - 100% Quality Satisfaction & Lifetime Warranty This silicone soldering work mat is also a best tool gift for Holiday Day. It's designed for disassembly or soldering any electronics you need, making it easier for you to remove and install electronic equipment. This product provides a 180-day refund and lifetime warranty. If you have any questions, please feel free to contact us and we will get back to you within 24 hours.
- See more on Amazon...
Brand: HPFIX | Manufacturer: U.S CAYEDA DIRECT
Dimensions: 0.27 x 14.20 x 22.00 inches
See On Amazon #25
533 Solder Flux,No Clean Flux,Lead Free Soldering Flux,Electronics Liquid Flux,for BGA/Phone/SMT/IC/Chip Etc.Precision Electronic Repairing (10g)
Asin: B0CRYT18V2 | Model: 533 | PartNumber: 533
Push Rod Design: The Push Rod Design Allows For Precise Control Of Solder Flux Release, Minimizing Waste During The Soldering Process..
Stable Performance And Low Volatility, No Shelf Life, Less Smoke, No Irritant Smell,Compliance With Rohs Standards.
High Rosin Concentration: The Flux Is Primarily Composed Of High-Concentration Rosin, Effortlessly Removing Oxidation From The Soldering Surface, Ensuring Solder Joint Stability And Reliability,It Is A Good Helper For Repairing And Soldering.
Scope Of Application Of Flux: 533 Flux Is For Precision Repair Soldering, Chip, Bga, Smd,Phone, Home Appliance Repairing,Etc..
Features
- Solder Flux Advantages: Lead free, halogen free, no corrosive, no conductive, excellent fluidity, and no need for cleaning after use.
- Scope of application of flux: 533 flux is for precision repair Soldering, Chip, BGA, SMD,Phone, Home Appliance Repairing,etc.
- Push Rod Design: The push Rod design allows for precise control of Solder Flux release, minimizing waste during the soldering process.
- High Rosin Concentration: The flux is primarily composed of high-concentration rosin, effortlessly removing oxidation from the soldering surface, ensuring solder joint stability and reliability,It is a good helper for repairing and soldering
- Stable Performance And Low Volatility, No Shelf Life, Less Smoke, No Irritant Smell,Compliance with RoHS Standards
- See more on Amazon...
Brand: KELLYSHUN | Manufacturer: KELLYSHUN
Dimensions: 0.70 x 3.70 x 1.20 inches
See On Amazon #26
Kaisiking Soldering Iron Tip Cleaner Solder Tip Cleaner - 5pcs Solder Tip Cleaning Wire Ball & Base Holder for Cleaning Soldering Irons and Tips
Asin: B0CNVS7BFZ | Model: WR433E4 | PartNumber: WR433E4
[Reduce Residue On Tip]: This Soldering Tip Brass Cleaner Cleans Much Better Than Conventional Sponges, It's No Need Water, Will Not Reduce The Tip Temperature When Clean Tips,Keep The Temperature Of The Tip Stable During Use, Improving The Productivity And Quality Of Solder Joints Without Damaging Your Tips..
[Easy To Use]: You Can Remove Residual Solder From Your Soldering Tools Quickly And Easily By Simply Inserting Your Soldering Tip Into The Center Of The Brass Sponge Tip Cleaner During And After Use, And Without Damaging Your Tips..
[Anti-Slip Ball Holder]: The Solder Cleaner Has Two Parts:The Ball Shell & Brass Sponge. You Can Separate The Two Parts To Clean Tin Residual And Easily To Replace With Welding Tip Cleaner..
Features
- [Soldering Iron Tip Cleaner]: 5pcs solder tip cleaning wire ball & base holder solder tip cleaner kit for cleaning soldering irons and tips.
- [Anti-Slip Ball Holder]: The solder cleaner has two parts:the ball shell & brass sponge. You can separate the two parts to clean tin residual and easily to replace with welding tip cleaner.
- [Reduce Residue on Tip]: this soldering tip brass cleaner cleans much better than conventional sponges, it's no need water, will not reduce the tip temperature when clean tips,keep the temperature of the tip stable during use, improving the productivity and quality of solder joints without damaging your tips.
- [Easy to Use]: you can remove residual solder from your soldering tools quickly and easily by simply inserting your soldering tip into the center of the brass sponge tip cleaner during and after use, and without damaging your tips.
- See more on Amazon...
Brand: Kaisiking | Manufacturer: Kaisiking
See On Amazon #27
Kaisiking Silicone Repair Mat,Soldering Mat, Heat Resistant Work Mat for Soldering Stations, Phone, Computer, Laptop Electronics Repair 15.7'' x 11'' (Grey)
Asin: B0CLDF3GPL | Model: S102 Mat Grey | PartNumber: S102 Mat Grey
Non-Slip Design: This Silicone Soldering Work Mat Both Surface And Back Side Are Non-Slip Design, Prevent Sliding On Your Counter Or Work Station, Easy For You To Repair Electronic Products Or Welding Work..
After-Sales Service: This Silicone Soldering Work Mat Is Also The Best Holiday Gift Or Birthday Gift To Family And Friends. A Special Gift For Your Friends Who Are Professional Welding And Repair Enthusiasts. This Product Provides A 90-Day Refund Warranty. If You Have Any Questions, Please Feel Free To Contact Us And We Will Get Back To You Within 24 Hours..
Widely Usage: The Solder Mat Has 210 Mini Screw Position, 12 Large Slots Keep Your Small Disassembled Components In Good Classification. You Don’T Worry The Small Screws Lost In Your Repairing Work. The Silicone Working Mat Improve Your Work Efficiency And Keep Maintenance Platform Clean And Tidy, So The Heat-Resistant Silicone Pad Be Widely Used For Electronic Products Repair Such As Smart Phones, Laptops, Sports Watches, Cameras, Smart Toys, Watches Repair, Circuit Board Repair, Soldering..
High-Quality Silicone Mat: This Soldering Work Mat Is Made Of Silicone Material, 100% Food Grade Which Meet Usa Fda Standard, Non-Toxic And Odorless..
Features
- PERFECT SIZE REPAIR MAT: The silicone soldering mat with size 15.7 x 11 , not very big, but enough for personal maintenance work pad, it provide big space to satisfy your many projects like for repairing mobile phone, computer circuit board, ipad, camera so on different size electronics.
- HIGH-QUALITY SILICONE MAT: This soldering work mat is made of silicone material, 100% food grade which meet USA FDA standard, non-toxic and odorless.
- NON-SLIP DESIGN: This silicone soldering work mat both surface and back side are non-slip design, prevent sliding on your counter or work station, easy for you to repair electronic products or welding work.
- WIDELY USAGE: The solder mat has 210 mini screw position, 12 Large slots keep your small disassembled components in good classification. You don t worry the small screws lost in your repairing work. The silicone working mat improve your work efficiency and keep maintenance platform clean and tidy, so the heat-resistant silicone pad be widely used for electronic products repair such as smart phones, laptops, sports watches, cameras, smart toys, watches repair, circuit board repair, soldering.
- AFTER-SALES SERVICE: This silicone soldering work mat is also the best holiday gift or birthday gift to family and friends. A special gift for your friends who are professional welding and repair enthusiasts. This product provides a 90-day refund warranty. If you have any questions, please feel free to contact us and we will get back to you within 24 hours.
- See more on Amazon...
Brand: Kaisiking | Manufacturer: Kaisiking
See On Amazon #28
Weller PL111 Tip, Pencil Plated, 03, Black (Pack of 2)
Asin: B0CHR7XV3V | Model: PL111 | PartNumber: PL111
Made To Withstand Even The Most Demanding Jobs.
All Our Products Have Been Designed With The Requirements Of The Professional In Mind.
Trusted, Designed, And Used By Experts.
International Renown For Our Diverse Range Of Products.
Leading Manufacturer Of High-Quality Tools.
Features
- The information below is per-pack only
- Leading manufacturer of high-quality tools
- Made to withstand even the most demanding jobs
- International Renown for our diverse range of products
- All our products have been designed with the requirements of the professional in mind
- Trusted, designed, and used by experts
- See more on Amazon...
Brand: Weller | Manufacturer: Apex Tool Group
Dimensions: 3.00 x 2.25 x 0.45 inches | Weight: 0.02 Pounds
See On Amazon #29
Soldering Mat Silicone Insulation Soldering Pad Repair Work Kit Heat-resistant Magnetic Soldering Station 10.9 x 7.9 Black
Asin: B0CT8GFCFD | Model: GJD001 | PartNumber: GJD001
【Anti-Slip And Anti-Static Design】 Both Surface And Back Side Are Adopting The Anti-Slip Design. It Won't Slide Around On Your Counter Or Station, And Its Attractive Design Keeps Small Parts Away From Sliding, Too. The Mat Adopts Anti-Static Design To Prevent Static Damage To Electronic Components.
【Improve The Working Environment】Are You Still Suffering From The Loss Of Screws ? Are You Still Worried About Damaging Your Desk When Do Soldering Or Electronics Repairing? Now A Silicone Heat Resistant Mat Will Solve All Your Troubles！It Can Not Only Protect The Components From Damage During The Maintenance Process, But Are Also Easy To Manage And Find Related Accessories, Keep The Workbench Clean And Tidy, And Easy To Store. It Will Be Your Right Assistant When Repairing Electronic Tools.
【Non-Toxic And Odorless】 The Mat Is Made Of High Quality Silicone. It Resists Corrosion And Out Of Shape. Its Texture Is Soft, Solid And Durable To Protect Soldering Iron Tip. It Easily Cleaned Nice With Soap And Water Or Even Rubbing Alcohol In Daily Use. Mats Environmental Safety Is Conducive To Improving The Working Environment Of Technicians.
【Heat Insulation】Soldering Station Magnetic Mat Can Resist The Temperature As High As 932°F (500℃), Fireproof And Is Anti-Corrosive Also, It Supports High Temperature Soldering Work Directly, And Can Protect Your Platform From Burning And Ruining.
Features
- Wide Application WMORE heat insulation silicone repair mat is an ideal product for soldering electronics assembly or electronics and circuit board repair, for example mart phone, laptop, computer, sports watch, camera, smart toy, eyeglasses etc. And you also use the repair mat as pot holders for pots, pans, trays, baked potatoes and more. You can even place in it that is heat-resistant, non-slip on tables or counters for pots and pans
- Heat Insulation Soldering station magnetic mat can resist the temperature as high as 932 F (500 ), fireproof and is anti-corrosive also, it supports high temperature soldering work directly, and can protect your platform from burning and ruining
- Anti-Slip and Anti-static Design Both surface and back side are adopting the anti-slip design. It won't slide around on your counter or station, and its attractive design keeps small parts away from sliding, too. The mat adopts anti-static design to prevent static damage to electronic components
- Non-toxic and Odorless The mat is made of high quality silicone. It resists corrosion and out of shape. Its texture is soft, solid and durable to protect soldering iron tip. It easily cleaned nice with soap and water or even rubbing alcohol in daily use. Mats environmental safety is conducive to improving the working environment of technicians
- Improve the Working Environment Are you still suffering from the loss of screws ? Are you still worried about damaging your desk when do soldering or electronics repairing? Now a silicone heat resistant mat will solve all your troubles it can not only protect the components from damage during the maintenance process, but are also easy to manage and find related accessories, keep the workbench clean and tidy, and easy to store. It will be your right assistant when repairing electronic tools
- See more on Amazon...
Brand: WMORE | Manufacturer: FOSHAN JCSOLDER CO.,LTD.
Dimensions: 0.04 x 7.90 x 10.90 inches
See On Amazon #30
LAKIX 982-I Soldering Iron Station, Precision Soldering Station with Temperature Control, Preset Channels, C/ F Conversion, Automatic Sleep Mode and Shutdown, Compatible C245 Soldering Tips
Asin: B0CS6KPT23 | Model: 982-I | PartNumber: 982-I
【°C/°F Conversion ＆ Preset Channels 】This Soldering Station Enables °C/ºf Conversion And 3 Temperature Presets For Efficient Soldering Temperature Customization, Boosting Your Soldering Efficiency..
【Note】The Heating Element And Soldering Pen Must Be Securely Installed, Or An 'Se' Error Will Be Displayed. This Product Is Rated For 110~127V Usa Specifications; Do Not Connect The Iron To A 220V Power Socket..
【Product List 】The Soldering Station's Robust Aluminum Case Guarantees Damage-Free Soldering. The Kit Includes 2 Soldering Tips (Type-I, K). Lakix 982-I Main Unit, A C245-Compatible Soldering Iron Handpiece, Holder, And Power Cord..
【Automatic Sleep 】Our Precision Soldering Station Comes With An Automatic Sleep Function. Placing The Soldering Iron On The Stand Triggers Automatic Cooldown And Enters Sleep Mode, Effectively Preserving And Extending Its Lifespan..
Features
- Fast Heating Adjustable Temperature LAKIX precision soldering station heats rapidly with a broad temperature range (90 C to 450 C / 194 to 842 ) for easy adjustment. It sustains a steady temperature via PID stabilization.
- Automatic sleep Our precision soldering station comes with an automatic sleep function. Placing the soldering iron on the stand triggers automatic cooldown and enters sleep mode, effectively preserving and extending its lifespan.
- C/ F conversion Preset channels This soldering station enables C/ F conversion and 3 temperature presets for efficient soldering temperature customization, boosting your soldering efficiency.
- Product List The soldering station's robust aluminum case guarantees damage-free soldering. The kit includes 2 soldering tips (Type-I, K). LAKIX 982-I main unit, a C245-compatible soldering iron handpiece, holder, and power cord.
- Note The heating element and soldering pen must be securely installed, or an 'SE' error will be displayed. This product is rated for 110~127V USA specifications; DO NOT connect the iron to a 220V power socket.
- See more on Amazon...
Brand: LAKIX | Manufacturer: LAKIX
See On Amazon
Looking For Something Else?
Search