Best universal joints - Buying Guide
Last Updated: 05/04/2024
Share on
Bestselling universal joints on Amazon
- Jeremywell UCP204-12 Pillow Block Bearing (2 Pack), 3/4 inch Bore, 2 Bolt Flange Mounted, Solid Cast...
- Universal Joint Coupling Metal Shaft Coupling Motor Connector (0.5in 0.9in 2in)
- Jeremywell UCP204-12 Pillow Block Bearing (4 Pack), 3/4 inch Bore, 2 Bolt Flange Mounted, Solid Cast...
- Micro Traders 4Pcs Angle Linkage Ball Joint Kit, with Spring Clip Dust Seal CS DIN 71802 Gear Linkag...
- Bailey Universal Joint Assemblies (Standard Series), Standard U Joint with 1 inch x 1 inch Inner Dia...
- Befenybay 4 Pcs 3mm to 3mm Universal Joint Shaft Coupling with Screws for Motor
- DUNSIHUI 2Pcs Universal Motor Joint Shaft Coupling with Screws (Joint Shaft Coupling, 8mm to 8mm)
- 12Pcs 4mm to 5mm Brass Shaft Coupling Joint Connector, Motor Shaft Coupling for RC DIY Airplane Boat...
- Kozelo 2pcs CS13 Angle Ball Joint - [M8x1.25 Right Female Thread, M8x1.25 Right Male Thread] Gas Spr...
- DMiotech 5 Pack 2mm to 2mm Rotatable Universal Steering Shaft U Joint Coupler Coupler Connector for ...
#1
Jeremywell UCP204-12 Pillow Block Bearing (2 Pack), 3/4 inch Bore, 2 Bolt Flange Mounted, Solid Cast Iron Base, Self-Alignment
Asin: B01IWGLAM0 | Model: PB-UCP204-12-2PCS | PartNumber: PB-UCP204-12-2PCS
Self-Aligning Feature: These Bearings Use Wide Inner Ring Ball Bearings With Self-Aligning Spherical Outside Diameters That Compensate For Shaft Misalignment..
Material: Made To Last, Our Mounted Bearings Consist Of Chrome Steel (Aisi 52100) Ball Bearings For Higher Resistance And Durability..
Pre-Lubricated: Bearings Come Pre-Lubricated And Ready For Immediate Installation. A Grease Fitting Is Supplied For Re-Lubrication..
Solid Base Housing: Jeremywell Pillow Blocks Are Manufactured Without Cavities And Fillers, Their Solid Base Makes The Bearings Stronger And More Durable. A Solid Base Helps Eliminate Material Build-Up And Is Easy To Maintain Unlike A Hollow Base Housing..
Features
- Design: UCP pillow block series has two-bolt mounting with set screw locking.
- Solid Base Housing: Jeremywell pillow blocks are manufactured without cavities and fillers, their solid base makes the bearings stronger and more durable. A solid base helps eliminate material build-up and is easy to maintain unlike a hollow base housing.
- Self-Aligning Feature: These bearings use wide inner ring ball bearings with self-aligning spherical outside diameters that compensate for shaft misalignment.
- Pre-lubricated: Bearings come pre-lubricated and ready for immediate installation. A grease fitting is supplied for re-lubrication.
- Material: Made to last, our mounted bearings consist of chrome steel (AISI 52100) ball bearings for higher resistance and durability.
- See more on Amazon...
Brand: Jeremywell | Manufacturer: Jeremywell
Dimensions: 1.00 x 1.00 x 0.00 inches
See On Amazon #2
Universal Joint Coupling Metal Shaft Coupling Motor Connector (0.5in 0.9in 2in)
Asin: B07VBQBV1V | Ean: 0694951463290 | UPC: 694951463290
【Common Use】The Shaft Joint Is Commonly Used For Shafts That Transmit Rotary Motion..
【Wide Application】The U-Joint Motor Connector Is Widely Used For Connecting Model Cars, Model Ships, Robots, Etc..
【Black】Our Universal Coupling Is Black And Has Simple Appearance, Which Is Not Only Practical But Also Beautiful..
【Durable】The Universal Joint Is Made Of Premium Metal Material, Which Is Durable And Has A Long Service Life..
Features
- CONNECT RIGID RODS This joint or coupling connects rigid rods whose axes are inclined to each other.
- DURABLE The universal joint is made of premium metal material, which is durable and has a long service life.
- COMMON USE The shaft joint is commonly used for shafts that transmit rotary motion.
- BLACK Our universal coupling is black and has simple appearance, which is not only practical but also beautiful.
- WIDE APPLICATION The U-joint motor connector is widely used for connecting model cars, model ships, robots, etc.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 2.01 x 0.47 x 0.83 inches | Weight: 0.26 pounds
See On Amazon #3
Jeremywell UCP204-12 Pillow Block Bearing (4 Pack), 3/4 inch Bore, 2 Bolt Flange Mounted, Solid Cast Iron Base, Self-Alignment
Asin: B01M10KGAB | Model: PB-UCP204-12-4PCS | PartNumber: PB-UCP204-12-4PCS
Self-Aligning Feature: These Bearings Use Wide Inner Ring Ball Bearings With Self-Aligning Spherical Outside Diameters That Compensate For Shaft Misalignment..
Material: Made To Last, Our Mounted Bearings Consist Of Chrome Steel (Aisi 52100) Ball Bearings For Higher Resistance And Durability..
Pre-Lubricated: Bearings Come Pre-Lubricated And Ready For Immediate Installation. A Grease Fitting Is Supplied For Re-Lubrication..
Solid Base Housing: Jeremywell Pillow Blocks Are Manufactured Without Cavities And Fillers, Their Solid Base Makes The Bearings Stronger And More Durable. A Solid Base Helps Eliminate Material Build-Up And Is Easy To Maintain Unlike A Hollow Base Housing..
Features
- Design: UCP pillow block series has two-bolt mounting with set screw locking.
- Solid Base Housing: Jeremywell pillow blocks are manufactured without cavities and fillers, their solid base makes the bearings stronger and more durable. A solid base helps eliminate material build-up and is easy to maintain unlike a hollow base housing.
- Self-Aligning Feature: These bearings use wide inner ring ball bearings with self-aligning spherical outside diameters that compensate for shaft misalignment.
- Pre-lubricated: Bearings come pre-lubricated and ready for immediate installation. A grease fitting is supplied for re-lubrication.
- Material: Made to last, our mounted bearings consist of chrome steel (AISI 52100) ball bearings for higher resistance and durability.
- See more on Amazon...
Brand: Jeremywell | Manufacturer: Jeremywell
Dimensions: 5.00 x 7.00 x 0.00 Inches | Weight: 6.80 pounds
See On Amazon #4
Micro Traders 4Pcs Angle Linkage Ball Joint Kit, with Spring Clip Dust Seal CS DIN 71802 Gear Linkage Replacements M6 (RH)
Asin: B08C2639ZH | Ean: 0712198013761 | UPC: 712198013761
[Design]: With Rubber Dust Seal, Used To Protect The Ball Point..
[Note]: Please Confirm The Specifics Before Purchase..
[High Quality]: It Is Designed For High Load Capacity, Strength And Hardness. Easy To Assemble And Disassemble..
[Rotation Angle]: With Spring Steel Clip, The Catch Version Is 15 Degree For Safety..
Features
- [Widely Use]: Fit for gas spring, horizontally hinged door, tatami bed, billboard, cupboard, canopy, etc. The accessories are used in automotive, industrial, DIY furniture, etc.
- [Rotation Angle]: With spring steel clip, the catch version is 15 degree for safety.
- [Design]: With rubber dust seal, used to protect the ball point.
- [High Quality]: It is designed for high load capacity, strength and hardness. Easy to assemble and disassemble.
- [Note]: Please confirm the specifics before purchase.
- See more on Amazon...
Brand: Micro Traders | Manufacturer: Micro Traders
See On Amazon #5
Bailey Universal Joint Assemblies (Standard Series), Standard U Joint with 1 inch x 1 inch Inner Diameter - Universal Joint with Relubricable Bearings - Standard Rod Ends Ball Joint, 1000 RPM, 2.52 lb
Asin: B07DJ715JS | Model: UJ-0808 | PartNumber: UJ-0808 | Ean: 0615986040041 | UPC: 615986040041
High Speed Operation: This 1000 Rpm U Joint Offers 90 Degree Deflection And Is Capable Of Carrying Up To 1000 Rpm Torque. Thanks To Its Needle Roller Bearings, This Universal Standard Joint Can Tackle Big And Rigid Shafts With Ease..
Multipurpose Uses: Our Steering Shaft U Joint Has A Wide Variety Of Applications In Automobiles Including Lightweight, Commercial And Off-Highway Vehicles. It Offers Hassle-Free Interchange With The Spicer 1000 Series..
Made To Last: This Universal Joint Is Made With Durability In Mind. Its Forged Yoke Is Sturdy, Flexible, Reliable, And Holds Up Well Against High Heat. Our Universal Joint Is Long-Lasting And Low Maintenance..
Precise Control: This Driveline U Joint Is Ideal For Connecting Control Rods, Steering Links, Etc. It Maintains A Fixed Point Of Contact Between Two Shafts And Can Control The Movement Of The Shafts With High Precision..
Features
- SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 1-inch x 1-inch inner diameter, keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.52 lb (1.14 kg).
- PRECISE CONTROL: This driveline u joint is ideal for connecting control rods, steering links, etc. It maintains a fixed point of contact between two shafts and can control the movement of the shafts with high precision.
- HIGH SPEED OPERATION: This 1000 RPM u joint offers 90 degree deflection and is capable of carrying up to 1000 RPM torque. Thanks to its needle roller bearings, this universal standard joint can tackle big and rigid shafts with ease.
- MADE TO LAST: This universal joint is made with durability in mind. Its forged yoke is sturdy, flexible, reliable, and holds up well against high heat. Our universal joint is long-lasting and low maintenance.
- MULTIPURPOSE USES: Our steering shaft u joint has a wide variety of applications in automobiles including lightweight, commercial and off-highway vehicles. It offers hassle-free interchange with the Spicer 1000 series.
- See more on Amazon...
Brand: Bailey | Manufacturer: Bailey Hydraulics
Weight: 2.52 pounds
See On Amazon #6
Befenybay 4 Pcs 3mm to 3mm Universal Joint Shaft Coupling with Screws for Motor
Asin: B07YY83Q2D | Ean: 0882791749876 | UPC: 882791749876
【Dimensions】Inner Diameter: 3Mm To 3Mm. Outer Diameter: 9Mm. Height: 23Mm.
【Function】 Can Be Used For Motor Etc.
【Package Include】4Pcs 3Mm To 3Mm Universal Joint Shaft Coupling, 1Pcs M3 Hex Wrench, 8Pcs Fastening Screws.
【Widely Used】Universal Joint Shaft Coupling Is Produced Based On International Flange Standard, Widely Used For Shaft Connection.
Features
- Material Universal joint shaft coupling is made of 45# steel, and then electroplated much stronger, wearproof
- Widely Used Universal joint shaft coupling is produced based on International Flange Standard, widely used for shaft connection
- Dimensions Inner Diameter: 3mm to 3mm. Outer Diameter: 9mm. Height: 23mm
- Package Include 4pcs 3mm to 3mm universal joint shaft coupling, 1pcs M3 hex wrench, 8pcs fastening screws
- Function Can be used for motor etc
- See more on Amazon...
Brand: Befenybay | Manufacturer: Befenybay
See On Amazon #7
DUNSIHUI 2Pcs Universal Motor Joint Shaft Coupling with Screws (Joint Shaft Coupling, 8mm to 8mm)
Asin: B0CHHZZ688
【Wide Application】Premium Universal Joint Shaft Coupling 8Mm To 8Mm Is Widely Used For Shaft Connection,Produced Based On International Flange Standard..
【Package & Service】Package Include: 2Pcsx 8Mm To 8Mm Universal Joint Shaft Coupling.Any Question Pls Fell Free To Contact Us, We Will Reply You Within 24H.And We Offer A 12 Month Warranty..
【Main Specification】Premium Universal Joint Shaft Coupling 8Mm To 8Mm ,Inner Diameter: 8Mm To 8Mm. Outer Diameter Is 14Mm. Height Is 34Mm. Color: Silver.
【High Quality】Premium Universal Joint Shaft Coupling 8Mm To 8Mm Is Made Of High Quality Wearproof Steel Material Which Can Use For A Long Time..
Features
- OPTIMAL PERFORMANCE premium upgrade Universal Motor Joint Shaft Coupling 8mm to 8mm is brand new,wearproof, durable and widely used for motor etc.
- HIGH QUALITY premium Universal Joint Shaft Coupling 8mm to 8mm is made of high quality wearproof steel material which can use for a long time.
- WIDE APPLICATION premium Universal Joint Shaft Coupling 8mm to 8mm is widely used for shaft connection,produced based on International Flange Standard.
- MAIN SPECIFICATION premium Universal Joint Shaft Coupling 8mm to 8mm ,Inner Diameter: 8mm to 8mm. Outer Diameter is 14mm. Height is 34mm. Color: Silver
- PACKAGE & SERVICE Package Include: 2Pcsx 8mm to 8mm Universal Joint Shaft Coupling.Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty.
- See more on Amazon...
Brand: DUNSIHUI | Manufacturer: DUNSIHUI
See On Amazon #8
12Pcs 4mm to 5mm Brass Shaft Coupling Joint Connector, Motor Shaft Coupling for RC DIY Airplane Boat Robot
Asin: B0C1RD6KFY
Advantage: With A Top-Tight Type Rigid Coupling, This Shaft Connector Delivers High Torque And Rigidity, Low Inertia, And Excellent Sensitivity..
Package Include: 12 X Motor Shaft Coupling Connector;2 X Allen Wrench;48 X Screws.
Application: Ideal For Use In Metal, Mold, And Mechanical Drive Applications, This Coupler Is Perfect For Automotive Tires, Rc Models, Airplanes, Boats, Electric Cars, And Toys..
Material: Made Of Brass, This Shaft Coupling Is Maintenance-Free, Oil-Proof, And Resistant To Corrosion For Long-Lasting Use. This Coupling Joint Connector Ensures Long-Term Structural Integrity And Reliable Performance..
Features
- Thread Size: M3; Length: 20mm/0.79 inch; Outer Diameter: 9mm/0.35 inch; Inner Hole Dia :4mm-5mm.
- Material: Made of brass, this shaft coupling is maintenance-free, oil-proof, and resistant to corrosion for long-lasting use. this coupling joint connector ensures long-term structural integrity and reliable performance.
- Advantage: With a top-tight type rigid coupling, this shaft connector delivers high torque and rigidity, low inertia, and excellent sensitivity.
- Application: Ideal for use in metal, mold, and mechanical drive applications, this coupler is perfect for automotive tires, RC models, airplanes, boats, electric cars, and toys.
- Package include: 12 x Motor Shaft Coupling Connector;2 x Allen Wrench;48 x Screws
- See more on Amazon...
Brand: daier | Manufacturer: daier
See On Amazon #9
Kozelo 2pcs CS13 Angle Ball Joint - [M8x1.25 Right Female Thread, M8x1.25 Right Male Thread] Gas Spring Elbow Joint Fitting for Automotive, Hinged Door, Cupboard
Asin: B0BSPQWVDP
3- Application - Fit For Gas Spring, Horizontally Hinged Door, Cupboard, Etc. Suitable For Automotive, Industrial, Diy Furniture, And More..
5- Take Notice Of - Please Refer To The Picture And Choose The Right Size And Thread Type Before Purchase..
4- Feature - Self-Lubricated Ball Socket, Low Noise And Durable..
2- Material - Stainless Steel Ball Joint And Zinc Plated , High Hardness, And Great Wear Resistance, Showing Stable Performance And Lasting Service Life.
Features
- 1- PACKAGE CONTENTS - 2pcs of M8 thread angled ball socket joint right hand female and right hand male, 1.5mm Pitch.
- 2- MATERIAL - Stainless steel ball joint and zinc plated , high hardness, and great wear resistance, showing stable performance and lasting service life
- 3- APPLICATION - Fit for gas spring, horizontally hinged door, cupboard, etc. Suitable for automotive, industrial, DIY furniture, and more.
- 4- FEATURE - Self-lubricated ball socket, low noise and durable.
- 5- TAKE NOTICE OF - Please refer to the picture and choose the right size and thread type before purchase.
- See more on Amazon...
Brand: Kozelo | Manufacturer: Kozelo
See On Amazon #10
DMiotech 5 Pack 2mm to 2mm Rotatable Universal Steering Shaft U Joint Coupler Coupler Connector for Motor, 3D Printer, CNC Machine
Asin: B0BNNSMX4G
Feature: The Universal Joint Coupling Nuts Are Nickel-Coated Iron, Which Is Sturdy And Durable For Long-Lasting Use. The Universal Joint Coupling Provides Torque Transmission And Alignment, A Cost-Effective Coupling Design, Which Is Very Flexible And Easy To Use..
Note: For Manual Measurement, Please Allow A Slight Dimensional Error Of The Item..
Function: The Rotatable Coupling Is Perfectly Applicable For Rc Model Cars And The Rc Model Boat Is The Perfect Motor Shaft Fitting Accessory..
Size: Thread Size: M3; Inner Diameter: 2Mm To 2Mm; Length: 18Mm/0.71 Inch; Outer Diameter: 8Mm/0.31 Inch; Color: Silver Tone..
Features
- APPLICATION: Universal joint coupling adopts a special coupler, used for connecting the motor shaft and the hexagon wheel of the robot, and other DIY models.
- SIZE: Thread Size: M3; Inner Diameter: 2mm to 2mm; Length: 18mm/0.71 inch; Outer Diameter: 8mm/0.31 inch; Color: Silver Tone.
- FEATURE: The universal joint coupling nuts are nickel-coated iron, which is sturdy and durable for long-lasting use. The universal joint coupling provides torque transmission and alignment, a cost-effective coupling design, which is very flexible and easy to use.
- FUNCTION: The rotatable coupling is perfectly applicable for RC model cars and the RC model boat is the perfect motor shaft fitting accessory.
- NOTE: For manual measurement, please allow a slight dimensional error of the item.
- See more on Amazon...
Brand: DMiotech | Manufacturer: DMiotech
See On Amazon #11
Kozelo 2pcs CS8 Angle Ball Joint - [M5x0.8 Right Female Thread, M5x0.8 Right Male Thread] Gas Spring Elbow Joint Fitting for Automotive, Hinged Door, Cupboard
Asin: B0BSPFSDCT
3- Application - Fit For Gas Spring, Horizontally Hinged Door, Cupboard, Etc. Suitable For Automotive, Industrial, Diy Furniture, And More..
5- Take Notice Of - Please Refer To The Picture And Choose The Right Size And Thread Type Before Purchase..
4- Feature - Self-Lubricated Ball Socket, Low Noise And Durable..
2- Material - Stainless Steel Ball Joint And Zinc Plated , High Hardness, And Great Wear Resistance, Showing Stable Performance And Lasting Service Life.
Features
- 1- PACKAGE CONTENTS - 2pcs of M5 thread angled ball socket joint right hand female and right hand male, 0.8mm Pitch.
- 2- MATERIAL - Stainless steel ball joint and zinc plated , high hardness, and great wear resistance, showing stable performance and lasting service life
- 3- APPLICATION - Fit for gas spring, horizontally hinged door, cupboard, etc. Suitable for automotive, industrial, DIY furniture, and more.
- 4- FEATURE - Self-lubricated ball socket, low noise and durable.
- 5- TAKE NOTICE OF - Please refer to the picture and choose the right size and thread type before purchase.
- See more on Amazon...
Brand: Kozelo | Manufacturer: Kozelo
See On Amazon #12
DMiotech 5 Pack 6mm to 6mm Rotatable Universal Steering Shaft U Joint Coupler Coupler Connector for Motor, 3D Printer, CNC Machine
Asin: B0BNNSMX4C
Feature: The Universal Joint Coupling Nuts Are Nickel-Coated Iron, Which Is Sturdy And Durable For Long-Lasting Use. The Universal Joint Coupling Provides Torque Transmission And Alignment, A Cost-Effective Coupling Design, Which Is Very Flexible And Easy To Use..
Note: For Manual Measurement, Please Allow A Slight Dimensional Error Of The Item..
Function: The Rotatable Coupling Is Perfectly Applicable For Rc Model Cars And The Rc Model Boat Is The Perfect Motor Shaft Fitting Accessory..
Size: Thread Size: M4; Inner Diameter: 6Mm To 6Mm; Length: 23Mm/0.91 Inch; Outer Diameter: 11Mm/0.43 Inch; Color: Silver Tone..
Features
- APPLICATION: Universal joint coupling adopts a special coupler, used for connecting the motor shaft and the hexagon wheel of the robot, and other DIY models.
- SIZE: Thread Size: M4; Inner Diameter: 6mm to 6mm; Length: 23mm/0.91 inch; Outer Diameter: 11mm/0.43 inch; Color: Silver Tone.
- FEATURE: The universal joint coupling nuts are nickel-coated iron, which is sturdy and durable for long-lasting use. The universal joint coupling provides torque transmission and alignment, a cost-effective coupling design, which is very flexible and easy to use.
- FUNCTION: The rotatable coupling is perfectly applicable for RC model cars and the RC model boat is the perfect motor shaft fitting accessory.
- NOTE: For manual measurement, please allow a slight dimensional error of the item.
- See more on Amazon...
Brand: DMiotech | Manufacturer: DMiotech
See On Amazon #13
DMiotech 1 Pack 10mm to 10mm Rotatable Universal Steering Shaft U Joint Coupler Coupler Connector for Motor, 3D Printer, CNC Machine
Asin: B0BNNVDLP9
Feature: The Universal Joint Coupling Nuts Are Nickel-Coated Iron, Which Is Sturdy And Durable For Long-Lasting Use. The Universal Joint Coupling Provides Torque Transmission And Alignment, A Cost-Effective Coupling Design, Which Is Very Flexible And Easy To Use..
Note: For Manual Measurement, Please Allow A Slight Dimensional Error Of The Item..
Function: The Rotatable Coupling Is Perfectly Applicable For Rc Model Cars And The Rc Model Boat Is The Perfect Motor Shaft Fitting Accessory..
Size: Thread Size: M4; Inner Diameter: 10Mm To 10Mm; Length: 35Mm/1.38 Inch; Outer Diameter: 16Mm/0.63 Inch; Color: Silver Tone..
Features
- APPLICATION: Universal joint coupling adopts a special coupler, used for connecting the motor shaft and the hexagon wheel of the robot, and other DIY models.
- SIZE: Thread Size: M4; Inner Diameter: 10mm to 10mm; Length: 35mm/1.38 inch; Outer Diameter: 16mm/0.63 inch; Color: Silver Tone.
- FEATURE: The universal joint coupling nuts are nickel-coated iron, which is sturdy and durable for long-lasting use. The universal joint coupling provides torque transmission and alignment, a cost-effective coupling design, which is very flexible and easy to use.
- FUNCTION: The rotatable coupling is perfectly applicable for RC model cars and the RC model boat is the perfect motor shaft fitting accessory.
- NOTE: For manual measurement, please allow a slight dimensional error of the item.
- See more on Amazon...
Brand: DMiotech | Manufacturer: DMiotech
See On Amazon #14
Kozelo 12pcs Angle Ball Joint - [M6x1.0 Right Female Thread, M6x1.0 Right Male Thread] Gas Spring Elbow Joint Fitting for Automotive, Hinged Door, Cupboard
Asin: B0BSPQJ4FN
3- Application - Fit For Gas Spring, Horizontally Hinged Door, Cupboard, Etc. Suitable For Automotive, Industrial, Diy Furniture, And More..
5- Take Notice Of - Please Refer To The Picture And Choose The Right Size And Thread Type Before Purchase..
4- Feature - Self-Lubricated Ball Socket, Low Noise And Durable..
2- Material - Stainless Steel Ball Joint And Zinc Plated , High Hardness, And Great Wear Resistance, Showing Stable Performance And Lasting Service Life.
Features
- 1- PACKAGE CONTENTS - 12pcs of M6 thread angled ball socket joint right hand female and right hand male, 1mm Pitch.
- 2- MATERIAL - Stainless steel ball joint and zinc plated , high hardness, and great wear resistance, showing stable performance and lasting service life
- 3- APPLICATION - Fit for gas spring, horizontally hinged door, cupboard, etc. Suitable for automotive, industrial, DIY furniture, and more.
- 4- FEATURE - Self-lubricated ball socket, low noise and durable.
- 5- TAKE NOTICE OF - Please refer to the picture and choose the right size and thread type before purchase.
- See more on Amazon...
Brand: Kozelo | Manufacturer: Kozelo
See On Amazon #15
YMAUGP 6pcs Front Rear Stabilizer Sway Bar End Link Front Lower Ball Joints for Honda Civic 2012-2015 (2014-2015: Natural Gas, LX, Hybrid, Hybrid-L, HF, EX, EX-L),for Acura ILX 2013-2015
Asin: B0CFTVYMYJ
【Premium Material】Our Suspension Components Are Ready To Meet The Rigorous Demands Of Today's Foreign And Domestic Passenger Cars, Trucks And Suvs. Undergo Impact, Wear, And Fatigue Testing To Help Ensure Quality And Durability. We Supply Suspension Kit Include Ball Joints, Sway Bars, Tie Rod Ends, Idler Arm, Pitman Arm, Track Bar, Drag Link, Control Arm Assembly For Front Rear Lower Upper Left Right..
【Warranty】Please Check The Description And Compatibility Chart Before Your Purchasing. We Provide Two Year Warranty For All Our Parts..
【Package】1X Front Stabilizer / Sway Bar End Link (Driver) - K750605,1X Front Stabilizer / Sway Bar End Link (Passenger) - K750604,1X Rear Stabilizer Sway Bar End Link Driver Side - K750125,1X Rear Stabilizer Sway Bar End Link Passenger Side - K750126,2X Front Lower Ball Joint Driver And Passenger Side - K500234.
【Replaces Number: 】K750605 K750604 K750125 K750126 K500234.
Features
- Fitment Fit for Honda Civic 2012 - 2015 (2014-2015: Natural Gas, LX, Hybrid, Hybrid-L, HF, EX, EX-L),for Acura ILX 2013 - 2015,Placement on Vehicle: Front, Rear, Left, Right
- Replaces number: K750605 K750604 K750125 K750126 K500234
- Premium Material Our Suspension Components are Ready to Meet the Rigorous Demands of Today's Foreign and Domestic Passenger Cars, Trucks and SUVs. Undergo Impact, Wear, and Fatigue Testing to Help Ensure Quality and Durability. We supply Suspension kit include ball joints, sway bars, tie rod ends, idler arm, pitman arm, track bar, drag link, control arm assembly for front rear lower upper left right.
- Package 1x Front Stabilizer / Sway Bar End Link (Driver) - K750605,1x Front Stabilizer / Sway Bar End Link (Passenger) - K750604,1x Rear Stabilizer Sway Bar End Link Driver Side - K750125,1x Rear Stabilizer Sway Bar End Link Passenger Side - K750126,2x Front Lower Ball Joint Driver and Passenger Side - K500234
- Warranty Please check the description and compatibility chart before your purchasing. We provide TWO YEAR WARRANTY for all our parts.
- See more on Amazon...
Brand: YMAUGP | Manufacturer: YMAUGP
See On Amazon #16
Universal Joints Coupler universal joint coupling motor connector boat metal cardan joint gimbal shaft couplings with screw for connecting model cars, model ships, robots, et
Asin: B0B7JJJCVX | Model: ELLYSBEAB-5MM-8MM | PartNumber: ELLYSBEAB-5MM-8MM
【Common Use】The Shaft Joint Is Commonly Used For Shafts That Transmit Rotary Motion..
【Quality After-Sale Service】: If You Do Not 100% Satisfied With Our Products Or If You Have Any Questions, You Can Contact Us Anytime..
【Wide Application】Coupling Universal Joint Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoder, Spindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque..
【Durable】The Universal Joint Is Made Of Premium Metal Material, Which Is Durable And Has A Long Service Life..
Features
- CONNECT RIGID RODS This joint or coupling connects rigid rods whose axes are inclined to each other.
- DURABLE The universal joint is made of premium metal material, which is durable and has a long service life.
- COMMON USE The shaft joint is commonly used for shafts that transmit rotary motion.
- WIDE APPLICATION Coupling Universal Joint Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoder, Spindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque.
- QUALITY AFTER-SALE SERVICE : If you do not 100% satisfied with our products or if you have any questions, you can contact us anytime.
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
Weight: 0.11 pounds
See On Amazon #17
6Pcs 3mm to 3mm Universal Joints, Rotatable Universal Steering Shaft U Joint Coupler for RC Boat Car
Asin: B0CRVKP2YQ
Versatile Application: This Coupling Universal Joint Is Ideal For Various Applications, Including Servo Motor Systems, 3D Printers, Cnc Machines, Diy Encoders, And More..
Package Include: Includes 6Pcs 3Mm To 3Mm Universal Joints, 12Pcs M2 Screws, And 1Pc M2 Wrench..
Function: The Purpose Of Our Universal Joint Is To Securely Connect The Driving Shaft And The Driven Shaft, Allowing Them To Rotate Together And Transmit Motion And Torque Effectively..
Durable: Our Universal Joint Is Crafted From High-Quality Pure Copper, Ensuring Durability And Long-Term Use..
Features
- Size: Inner Diameter: 3mm to 3mm; Length: 13mm/0.51 inch; Outer Diameter: 7mm/0.28 inch; Color: Silver Tone.
- Durable: Our universal joint is crafted from high-quality pure copper, ensuring durability and long-term use.
- Versatile Application: This coupling universal joint is ideal for various applications, including servo motor systems, 3D printers, CNC machines, DIY encoders, and more.
- Function: The purpose of our universal joint is to securely connect the driving shaft and the driven shaft, allowing them to rotate together and transmit motion and torque effectively.
- Package include: includes 6Pcs 3mm to 3mm universal joints, 12Pcs M2 screws, and 1Pc M2 wrench.
- See more on Amazon...
Brand: daier | Manufacturer: daier
See On Amazon #18
Fielect 4mm to 4mm Inner Dia Bore Rotatable Universal Joint Shaft Coupling with Screws for Robot Boat Car Shaft Motor Connector Coupler
Asin: B08P2Z93W1 | Ean: 0884591495557 | UPC: 884591495557
【Feature】 - Universal Joint Coupling Adopts A Special Coupler, Used For Connecting The Motor Shaft And The Hexagon Wheel Of The Robot, Toy Cars, And Other Models..
【Application】 - The Rotable Coupling Is Perfectly Applicable For Rc Model Car And Rc Model Boat,Is Perfect Motor Shaft Fitting Accessories..
【Advantage】 - The Universal Joint Coupling Provides Torque Transmision And Alignment,Cost Effective Coupling Design,Which Is Very Flexible And Easy For Use..
【Material】 - The Universal Joint Coupling Nuts Are Made Of Premium Material, Which Is Sturdy And Durable For Long Lasting Use..
Features
- Specification - Thread Size: M3; Length: 52mm/2.05 inch; Outer Diameter: 12mm/0.47 inch; Inner Hole Dia: 4mm x 4mm/0.16 inch x 0.16 inch
- Material - The universal joint coupling nuts are made of premium material, which is sturdy and durable for long lasting use.
- Feature - universal joint coupling adopts a special coupler, used for connecting the motor shaft and the hexagon wheel of the robot, toy cars, and other models.
- Advantage - The universal joint coupling provides torque transmision and alignment,cost effective coupling design,which is very flexible and easy for use.
- Application - The rotable coupling is perfectly applicable for RC model car and RC model boat,is perfect motor shaft fitting accessories.
- See more on Amazon...
Brand: Fielect | Manufacturer: Fielect
See On Amazon #19
Bognajin Universal Coupling 3-Section 8 x 16 x 58mm Alloy Steel Shaft Joint for Industrial Applications High Durability and Precise Adjustment
Asin: B0D2ZD2SW1
【Firm Connection】 Features An Exquisitely Designed Mechanical Structure That Secures The Connection Between Shafts, Preventing Disengagement.
【Expert Craftsmanship】 Precision-Engineered By Experts, Offering A Light, Practical, And Trustworthy Universal Coupling For Confident Usage.
【Strict Quality Standards】 Manufactured Under Strict Quality Control Standards, Enhancing Durability And Reliability For Prolonged Use.
【Universal Adjustment】 Supports Three-Section Steering For Versatile Adjustments, Making It An Ideal Choice For Various Mechanical Setups.
Features
- Robust Material Crafted from alloy steel, ensuring the coupling is robust and built to last, suitable for heavy-duty applications
- Universal Adjustment Supports three-section steering for versatile adjustments, making it an ideal choice for various mechanical setups
- Firm Connection Features an exquisitely designed mechanical structure that secures the connection between shafts, preventing disengagement
- Strict Quality Standards Manufactured under strict quality control standards, enhancing durability and reliability for prolonged use
- Expert Craftsmanship Precision-engineered by experts, offering a light, practical, and trustworthy universal coupling for confident usage
- See more on Amazon...
Brand: Bognajin | Manufacturer: Bognajin
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.13 pounds
See On Amazon #20
Rc Double Universal Joint Cardan Joint Gimbal Couplings with Screw Couple Shaft Coupling Joint Diaphragm Coupling (Size : 5 MM)
Asin: B0D2Y4FDP9 | Model: JIZNO | PartNumber: JIZNO | Ean: 8880480714930
Rotatable Joints Can Be Bent, It Is Very Easy To Use. It Is Exquisite And Compact And Light In Weight..
Ideal Accessories For Rc Model Motor, Such As Model Airplane, Boats And Robots..
It Is Commonly Used For Shafts That Transmit Rotary Motion..
This Joint Or Coupling Connects Rigid Rods Whose Axes Are Inclined To Each Other..
Features
- Made Of Metal Material, It Is Has Long Service Life.
- This Joint Or Coupling Connects Rigid Rods Whose Axes Are Inclined To Each Other.
- Rotatable Joints Can Be Bent, It Is Very Easy To Use. It Is Exquisite And Compact And Light In Weight.
- It Is Commonly Used For Shafts That Transmit Rotary Motion.
- Ideal Accessories For Rc Model Motor, Such As Model Airplane, Boats And Robots.
- See more on Amazon...
Brand: JIZNO | Manufacturer: JIZNO
Weight: 0.22 pounds
See On Amazon #21
D34 L80 Universal Coupling Precision Single Section Telescopic Cross Universal Joint Transmission Joint (Size : 8x17)
Asin: B0D2Y4F91F | Model: JIZNO | PartNumber: JIZNO | Ean: 8880480717801
High Hardness Coupling：Our Universal Joints Are Made Of Metal, Which Has High Hardness, Will Not Be Deformed When Transmitting Torque, Is Has A Long Service Life.
Wide Application：Widely Applied For Connecting Model Cars, Model Ships, Robots, Etc..
Firmly Connected：The Coupling Is Applied To Rigid Rods Whose Connecting Axes Are Inclined To Each Other, Usually When The Rigid Rod With Complicated Path Is Not Easy To Work.
Material: Metal--D34 L80 Universal Coupling.
Features
- Steerable Universal Joint This motor connector consists of a pair of hinges that are close together, these hinges are connected by a horizontal axis, and the other end will also move with the free rotation
- Material: Metal--D34 L80 universal coupling
- High Hardness Coupling Our universal joints are made of metal, which has high hardness, will not be deformed when transmitting torque, is has a long service life
- Firmly Connected The coupling is applied to rigid rods whose connecting axes are inclined to each other, usually when the rigid rod with complicated path is not easy to work
- WIDE APPLICATION Widely applied for connecting model cars, model ships, robots, etc.
- See more on Amazon...
Brand: JIZNO | Manufacturer: JIZNO
Weight: 0.22 pounds
See On Amazon #22
Cross Universal Joint Telescopic Cardan Joint Precision Single and Double Shaft Coupler Metal Universal Joint Coupling (Size : 03GD)
Asin: B0D2Y6JJGX | Model: JIZNO | PartNumber: JIZNO | Ean: 8880480717207
Perfect Motor Shaft Fitting：360 Degree Rotatable, It Is Commonly Used For Shafts That Transmit Rotary Motion, Perfect Motor Shaft Fitting Accessories..
Wide Application：Widely Applied For Connecting Model Cars, Model Ships, Robots, Etc..
Coupling Connector：This Joint Or Coupling Connects Rigid Rods Whose Axes Are Inclined To Each Other, Outstanding Appearance And Performance..
Product：1 Pc Universal Joint Coupling, Brand New , Easy To Install And Remove..
Features
- METAL MATERIAL Made of premium metal material, it is has long service life.
- PRODUCT 1 Pc universal joint coupling, brand new , easy to install and remove.
- PERFECT MOTOR SHAFT FITTING 360 degree rotatable, it is commonly used for shafts that transmit rotary motion, perfect motor shaft fitting accessories.
- COUPLING CONNECTOR This joint or coupling connects rigid rods whose axes are inclined to each other, outstanding appearance and performance.
- WIDE APPLICATION Widely applied for connecting model cars, model ships, robots, etc.
- See more on Amazon...
Brand: JIZNO | Manufacturer: JIZNO
Weight: 0.22 pounds
See On Amazon #23
Metal Cardan Universal Coupling Joint Gimbal Couplings 2/2.3/3/3.17/4/5/6/8/10/12mm Boat Car Shaft Coupler Motor Connector (Size : D9L23-2mm-3mm)
Asin: B0D2Y3Q2PS | Model: JIZNO | PartNumber: JIZNO | Ean: 8880480717153
Rotatable Joints Can Be Bent, It Is Very Easy To Use. It Is Exquisite And Compact And Light In Weight..
The Motor Connector Is Widely Used To Connect Model Car, Model Boats, Robots, Etc..
It Is Commonly Used For Shafts That Transmit Rotary Motion..
This Joint Or Coupling Connects Rigid Rods Whose Axes Are Inclined To Each Other..
Features
- Made Of Metal Material, It Is Has Long Service Life.
- This Joint Or Coupling Connects Rigid Rods Whose Axes Are Inclined To Each Other.
- Rotatable Joints Can Be Bent, It Is Very Easy To Use. It Is Exquisite And Compact And Light In Weight.
- It Is Commonly Used For Shafts That Transmit Rotary Motion.
- The motor connector is widely used to connect model car, model boats, robots, etc.
- See more on Amazon...
Brand: JIZNO | Manufacturer: JIZNO
Weight: 0.22 pounds
See On Amazon #24
1pcs 6mm-35mm Hole Motor Output Shaft Coupler Connector Adaptor Cross Universal Joint Coupling Bushing (Size : 35x58x140mm)
Asin: B0D2Y2ZTRN | Model: JIZNO | PartNumber: JIZNO | Ean: 8880480716545
Cross Shaft Design: This Universal Shaft U Joint Consists Of A Pair Of Hinges And They Are Connected By A Cross Shaft. And This Shaft Is Used To Connect Two Parts To Transfer The Rotational Force, Known As Torque, From One Shaft To Another, Hardworking Design For Easy Transimitting.
Widely Used: This Universal U-Joint Coupling Is Widely Used In Daily Life. It Is Commonly Used On Shafts That Transmit Rotary Motion, Such As In Automobiles, Conveyors, Escalators, Agricultural, Forestry, And Mining Machines, Aviation, Robotics, And Space Exploration Very Helpful And Useful..
Package Includes: 1 X Universal Joint Coupling, The Installation Is Very Convenient For You..
Design: The Axes Of This Joint Or Coupling Connect Rigid Rods That Are Inclined To Each Other To Generate A Simple And Fast Transmitting Torque From One Shaft To Another. Transmit Torque. The Parallel Or Angled Construction Transfers The Torque From One Shaft To Another In The Form Of Tensions, Loads, Vibrations And Other Forces That Vary From One Type Of Misalignment To Another.
Features
- Material: This universal joint is made of metal , is more wear resistance, don't worry about corrosion.
- Design: The axes of this joint or coupling connect rigid rods that are inclined to each other to generate a simple and fast transmitting torque from one shaft to another. transmit torque. The parallel or angled construction transfers the torque from one shaft to another in the form of tensions, loads, vibrations and other forces that vary from one type of misalignment to another
- Cross Shaft Design: This Universal Shaft U Joint consists of a pair of hinges and they are connected by a cross shaft. And this shaft is used to connect two parts to transfer the rotational force, known as torque, from one shaft to another, hardworking design for easy transimitting
- Package includes: 1 x universal joint coupling, The installation is very convenient for you.
- Widely used: This universal U-joint coupling is widely used in daily life. It is commonly used on shafts that transmit rotary motion, such as in automobiles, conveyors, escalators, agricultural, forestry, and mining machines, aviation, robotics, and space exploration Very helpful and useful.
- See more on Amazon...
Brand: JIZNO | Manufacturer: JIZNO
Weight: 0.22 pounds
See On Amazon #25
Car Boat Model Universal Coupler Joint Coupling Steel Shaft Connector Crossing 1pc 2mm 2.3mm 3mm 3.17mm 4mm 5mm 6mm 8mm 10mm (Size : 4mm-5mm)
Asin: B0D2Y6CR8J | Model: JIZNO | PartNumber: JIZNO | Ean: 8880480739483
Perfect Motor Shaft Fitting： It Is Commonly Used For Shafts That Transmit Rotary Motion, Perfect Motor Shaft Fitting Accessories..
Wide Application：Widely Applied For Connecting Model Cars, Model Ships, Robots, Etc..
Coupling Connector：This Joint Or Coupling Connects Rigid Rods Whose Axes Are Inclined To Each Other, Outstanding Appearance And Performance..
Product：1 Pc Universal Joint Coupling, Brand New , Easy To Install And Remove..
Features
- METAL MATERIAL Made of premium metal material, it is has long service life.
- PRODUCT 1 Pc universal joint coupling, brand new , easy to install and remove.
- PERFECT MOTOR SHAFT FITTING it is commonly used for shafts that transmit rotary motion, perfect motor shaft fitting accessories.
- COUPLING CONNECTOR This joint or coupling connects rigid rods whose axes are inclined to each other, outstanding appearance and performance.
- WIDE APPLICATION Widely applied for connecting model cars, model ships, robots, etc.
- See more on Amazon...
Brand: JIZNO | Manufacturer: JIZNO
Weight: 0.22 pounds
See On Amazon #26
Cross Universal Joint Coupling Precision Single and Double Joint Telescopic Cardan Joint Needle Roller Bearing Shaft Coupler (Size : 03G)
Asin: B0D2Y68KRX | Model: JIZNO | PartNumber: JIZNO | Ean: 8880480715371
Cross Shaft Design: This Universal Shaft U Joint Consists Of A Pair Of Hinges And They Are Connected By A Cross Shaft. And This Shaft Is Used To Connect Two Parts To Transfer The Rotational Force, Known As Torque, From One Shaft To Another, Hardworking Design For Easy Transimitting.
Widely Used: This Universal U-Joint Coupling Is Widely Used In Daily Life. It Is Commonly Used On Shafts That Transmit Rotary Motion, Such As In Automobiles, Conveyors, Escalators, Agricultural, Forestry, And Mining Machines, Aviation, Robotics, And Space Exploration Very Helpful And Useful..
Package Includes: 1 X Universal Joint Coupling, The Installation Is Very Convenient For You..
Design: The Axes Of This Joint Or Coupling Connect Rigid Rods That Are Inclined To Each Other To Generate A Simple And Fast Transmitting Torque From One Shaft To Another. Transmit Torque. The Parallel Or Angled Construction Transfers The Torque From One Shaft To Another In The Form Of Tensions, Loads, Vibrations And Other Forces That Vary From One Type Of Misalignment To Another.
Features
- Material: This universal joint is made of metal , is more wear resistance, don't worry about corrosion.
- Design: The axes of this joint or coupling connect rigid rods that are inclined to each other to generate a simple and fast transmitting torque from one shaft to another. transmit torque. The parallel or angled construction transfers the torque from one shaft to another in the form of tensions, loads, vibrations and other forces that vary from one type of misalignment to another
- Cross Shaft Design: This Universal Shaft U Joint consists of a pair of hinges and they are connected by a cross shaft. And this shaft is used to connect two parts to transfer the rotational force, known as torque, from one shaft to another, hardworking design for easy transimitting
- Package includes: 1 x universal joint coupling, The installation is very convenient for you.
- Widely used: This universal U-joint coupling is widely used in daily life. It is commonly used on shafts that transmit rotary motion, such as in automobiles, conveyors, escalators, agricultural, forestry, and mining machines, aviation, robotics, and space exploration Very helpful and useful.
- See more on Amazon...
Brand: JIZNO | Manufacturer: JIZNO
Weight: 0.22 pounds
See On Amazon #27
Boat Car Shaft Coupler Motor Connector Metal Universal Joint Coupling 1pc 2/3/3.17/4/5/6/6.35/8/10mm (Size : 3mm-3mm)
Asin: B0D2Y3XRXT | Model: JIZNO | PartNumber: JIZNO | Ean: 8880480716354
Rotatable Joints Can Be Bent, It Is Very Easy To Use. It Is Exquisite And Compact And Light In Weight..
Ideal Accessories For Rc Model Motor, Such As Model Airplane, Boats And Robots..
It Is Commonly Used For Shafts That Transmit Rotary Motion..
This Joint Or Coupling Connects Rigid Rods Whose Axes Are Inclined To Each Other..
Features
- Made Of Metal Material, It Is Has Long Service Life.
- This Joint Or Coupling Connects Rigid Rods Whose Axes Are Inclined To Each Other.
- Rotatable Joints Can Be Bent, It Is Very Easy To Use. It Is Exquisite And Compact And Light In Weight.
- It Is Commonly Used For Shafts That Transmit Rotary Motion.
- Ideal Accessories For Rc Model Motor, Such As Model Airplane, Boats And Robots.
- See more on Amazon...
Brand: JIZNO | Manufacturer: JIZNO
Weight: 0.22 pounds
See On Amazon #28
Bailey Universal Joint Assemblies (Standard Series) - Universal Joint with Relubricable Bearings - Standard U Joint, 3/4 x 3/4 ID, 3/16 Keyway, 1000 RPM, 5 Overall Length, 2.4 lb, 133014
Asin: B07DJ576SK | Model: 133014 | PartNumber: 133014 | Ean: 0615986040027 | UPC: 615986040027
Tough: With Simple But Precise Construction, This U Joint From Bailey Is Capable Of Coupling Laterally Dissonant Shafts. It Reduces Side Thrust On Bearing Bushings, Protecting Them From Damage Even When Subjected To Long-Term Use..
Made To Last: These Universal Joints Have Radical Drop-Forged Slip Yokes Along With Relubricable Needle Bearings. They Are Resistant To Everyday Wear And Tear, Have Exceptional Tolerance Of High Torques, And Are Built To Go The Mile..
Flexible: This Standard Rod Ends Ball Joint Allows Up To 15% Angular Displacement At Peak Velocity. The Universal Ball Rod Assembly Facilitates Easy Up/Down Movement Of The Drive Shaft In Automobile, Industrial, And Commercial Applications..
High Speed: Our Robust Cardan Joint Can Withstand A Maximum Torque Of 800 Lb-Inches At A Consistent Speed Of 1000 Rpm. This Universal Joint Assembly Is Best Suited For High-Speed, High Torque Operations..
Features
- SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 3/4 x 3/4 inner diameter, 3/16 keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.4 lb.
- HIGH SPEED: Our robust Cardan joint can withstand a maximum torque of 800 lb-inches at a consistent speed of 1000 RPM. This universal joint assembly is best suited for high-speed, high torque operations.
- TOUGH: With simple but precise construction, this U Joint from Bailey is capable of coupling laterally dissonant shafts. It reduces side thrust on bearing bushings, protecting them from damage even when subjected to long-term use.
- FLEXIBLE: This standard rod ends ball joint allows up to 15% angular displacement at peak velocity. The universal ball rod assembly facilitates easy Up/Down movement of the drive shaft in automobile, industrial, and commercial applications.
- MADE TO LAST: These universal joints have radical drop-forged slip yokes along with relubricable needle bearings. They are resistant to everyday wear and tear, have exceptional tolerance of high torques, and are built to go the mile.
- See more on Amazon...
Brand: Bailey | Manufacturer: Bailey Hydraulics
Weight: 2.40 pounds
See On Amazon #29
Befenybay 4 Pcs 4mm to 4mm Universal Joint Shaft Coupling with Screws for Motor
Asin: B07VB4XQX2 | Ean: 0824941673006 | UPC: 824941673006
【Dimensions】Inner Diameter: 4Mm To 4Mm. Outer Diameter: 9Mm. Height: 23Mm.
【Function】 Can Be Used For Motor Etc.
【Package Include】4Pcs 4Mm To 4Mm Universal Joint Shaft Coupling, 1Pcs M3 Hex Wrench, 8Pcs Fastening Screws.
【Widely Used】Universal Joint Shaft Coupling Is Produced Based On International Flange Standard, Widely Used For Shaft Connection.
Features
- Material Universal joint shaft coupling is made of 45# steel, and then electroplated much stronger, wearproof
- Widely Used Universal joint shaft coupling is produced based on International Flange Standard, widely used for shaft connection
- Dimensions Inner Diameter: 4mm to 4mm. Outer Diameter: 9mm. Height: 23mm
- Package Include 4pcs 4mm to 4mm universal joint shaft coupling, 1pcs M3 hex wrench, 8pcs fastening screws
- Function Can be used for motor etc
- See more on Amazon...
Brand: Befenybay | Manufacturer: Befenybay
See On Amazon #30
Fielect 2pcs 3.17mm to 4mm Inner Dia Rotatable Universal Steering Shaft U Joint Coupler L23 x D9
Asin: B081GSN8ZF | Model: FLT20190905K-0056 | PartNumber: FLT20190905K-0056 | Ean: 0884591496127 | UPC: 884591496127
【High Quality Material】- The Universal Joint Coupling Nuts Are Made Of Premium Material, Which Is Sturdy And Durable For Long Lasting.
【Application】- The Rotable Coupling Is Perfectly Applicable For Rc Model Car And Rc Model Boat,Is Perfect Motor Shaft Fitting Accessories.
【Feature】- Shaft Coupling Connector Provides Torque Transmision And Alignment,Cost Effective Coupling Design,Which Is Very Flexible And Easy For Use.
【Inner Hole Dia】- 3.17Mm X 4Mm/0.12 Inch X 0.16 Inch ; Thread Size: M3.
Features
- Outer Diameter - 9mm/0.35 inch; Length: 23mm/0.91 inch
- Inner Hole Dia - 3.17mm x 4mm/0.12 inch x 0.16 inch ; Thread Size: M3
- High quality material - The universal joint coupling nuts are made of premium material, which is sturdy and durable for long lasting
- Feature - Shaft coupling connector provides torque transmision and alignment,Cost effective coupling design,which is very flexible and easy for use
- Application - The rotable coupling is perfectly applicable for RC model car and RC model boat,is perfect motor shaft fitting accessories
- See more on Amazon...
Brand: Fielect | Manufacturer: Fielect
See On Amazon
Looking For Something Else?
Search