Best hydraulic tube compression union fittings - Buying Guide
Last Updated: 05/04/2024
Share on
Bestselling hydraulic tube compression union fittings on Amazon
- MuHize Compression Tube Fitting - Upgraded 3/16" High Pressure Compression Union, Brake Line Adapter...
- Anderson Metals - 50064-04 50064 Brass Compression Tube Fitting, Tee, 1/4" x 1/4" x 1/4" Tube OD
- Brass Compression Tube Fitting, Union, 1/4" OD x 1/4" OD, 5pcs
- ChillWaves Brass Compression Tube Fitting, 3/8" OD x 3/8" OD Compression Union Connector(10-PACK)
- Legines Brass Compression Tube Fitting, Union, 1/8" OD x 1/8" OD, Pack of 2
- Anderson Metals 50062-06 50062 Brass Compression Tube Fitting, Union, 3/8" x 3/8" Tube OD
- 46 PCS Compression Fittings, Brass Compression Tube Pipe Fittings Assortment Set, 1/8" 3/16" 1/4" 5/...
- Hooshing 3PCS Compression Tube Pipe Fitting 3/8" Tube OD x 3/8" Tube OD Connector Brass Straight Cou...
- HaSaoMoi D.O.T Brass Compression Straight Union Fittings, 3/8" Air Compression Union for Nylon Tubin...
- Anderson Metals Brass Tube Fitting, Connector, 1/4" Compression x 1/8" Male Pipe
#1
MuHize Compression Tube Fitting - Upgraded 3/16" High Pressure Compression Union, Brake Line Adapter Fittings Assortment, Compression Tube Fitting for Industrial Use or Trucks Trailers(Pack of 8)
Asin: B0CCKXHN2Y | Ean: 0717717633758 | UPC: 717717633758
【Versatile Compatibility】: This High-Quality Brass Union Works Seamlessly With Copper, Brass, Aluminum, Or Plastic Tubing, Suitable For Most Automotive Applications..
【Working Principle】: Muhize Compression Tube Fitting Is To Compress The Ferrule By Thread Interlocking, And The Two Ends Of The Inner Diameter Of The Ferrule Tightly Wrap The Tube Due To Radial Shrinkage, Which Plays A Sealing Role And Realizes The Sealing And Tightening Effect Between The Joint And The Tube..
【Size & Package Includes】: 3/16" Tube Od X 3/16" Tube Od. Muhize Compression Tube Fitting Mainly Consists Of A Fitting Body With A 24-Degree Tapered Hole, A Ferrule With A Sharp Inner Edge, And A Nut For Compression(Pack Of 8)..
【Rust-Proof Reliability】: Muhize Brass Compression Union Fitting Is Built To Last, Protecting Your Brake Lines From Corrosion In Harsh Conditions..
Features
- Easy to Install : MuHize compression fitting is much easier than replacing, bending, and flaring new lines. Compression fittings for copper pipe are easy to disassemble no flaring tool is required. Just make sure the cuts to the original lines are clean and these will outlast the rest of the line with no leaks.
- Rust-Proof Reliability : MuHize brass compression union fitting is built to last, protecting your brake lines from corrosion in harsh conditions.
- Versatile Compatibility : This high-quality brass union works seamlessly with copper, brass, aluminum, or plastic tubing, suitable for most automotive applications.
- Size & Package Includes : 3/16 Tube OD x 3/16 Tube OD. MuHize compression Tube Fitting mainly consists of a fitting body with a 24-degree tapered hole, a ferrule with a sharp inner edge, and a nut for compression(pack of 8).
- Working Principle : MuHize compression Tube Fitting is to compress the ferrule by thread interlocking, and the two ends of the inner diameter of the ferrule tightly wrap the tube due to radial shrinkage, which plays a sealing role and realizes the sealing and tightening effect between the joint and the tube.
- See more on Amazon...
Brand: MuHize | Manufacturer: MuHize
See On Amazon #2
Anderson Metals - 50064-04 50064 Brass Compression Tube Fitting, Tee, 1/4" x 1/4" x 1/4" Tube OD
Asin: B000KDZVRO | Model: 50064-04 | PartNumber: 50064-04 | Ean: 0719852933809 | UPC: 719852933809
Standard Fittings Use Short Nuts.
Primary Uses Water, Gasoline, Oil And Vacuum Lines.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Easy To Disassemble No Flaring Tool Required.
Use With Copper, Brass, Aluminum, Or Plastic Tubing.
Features
- Three piece construction - nut, sleeve and body with attached insert
- Use with copper, brass, aluminum, or plastic tubing
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Anderson Metals | Manufacturer: Anderson Metals
See On Amazon #3
Brass Compression Tube Fitting, Union, 1/4" OD x 1/4" OD, 5pcs
Asin: B07SN9SDJL | Model: 62*4-5 | PartNumber: 62*4-5 | Ean: 0745396603830 | UPC: 745396603830
Use With Copper, Brass, Aluminum, Or Plastic Tubing. -65 Degree F To +250 Degree F Temperature Range. Standard Fittings Use Short Nuts..
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Three Piece Construction - Nut, Sleeve And Body With Attached Insert.Easy To Disassemble No Flaring Tool Required..
Features
- Size: 1/4" Tube OD x 1/4" Tube OD.
- Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required.
- Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: TL TOOLEGIN | Manufacturer: Le
Weight: 1.00 pounds
See On Amazon #4
ChillWaves Brass Compression Tube Fitting, 3/8" OD x 3/8" OD Compression Union Connector(10-PACK)
Asin: B0B755R2JD | Model: CWJX060 | PartNumber: CWJX060
Use - Suitable For Oil, Gas, Water And Other Non-Corrosive Or Corrosive Pipeline Systems, Temperature And Pressure Resistance, Good Sealing And Repeatability, No Need For Welding And Flaring Tools, Easy Disassembly, Installation And Maintenance, Etc..
Working Principle - Compression Tube Fitting Is To Compress The Ferrule By Thread Interlocking, And The Two Ends Of The Inner Diameter Of The Ferrule Tightly Wrap The Tube Due To Radial Shrinkage, Which Plays A Sealing Role And Realizes The Sealing And Tightening Effect Between The Joint And The Tube..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 3/8" Tube OD x 3/8" Tube OD, Compression Tube Fitting mainly consists of a fitting body with a 24 degree tapered hole, a ferrule with a sharp inner edge, and a nut for compression.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - Suitable for oil, gas, water and other non-corrosive or corrosive pipeline systems, temperature and pressure resistance, good sealing and repeatability, no need for welding and flaring tools, easy disassembly, installation and maintenance, etc.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- WORKING PRINCIPLE - Compression Tube Fitting is to compress the ferrule by thread interlocking, and the two ends of the inner diameter of the ferrule tightly wrap the tube due to radial shrinkage, which plays a sealing role and realizes the sealing and tightening effect between the joint and the tube.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #5
Legines Brass Compression Tube Fitting, Union, 1/8" OD x 1/8" OD, Pack of 2
Asin: B075L6RSWY | Ean: 6208252173174
Use With Copper,Aluminum And Thermoplastic Tub-Ing.Not Recommended For Steel Tubing..
Meets Specifications And Standards Of Asa, Asme Asn Sae..
Not Recommended For Application Using Gas Eous Media..
Manufactured For Low And Medium Pressure Tubing Connection Work Where Excessive Vibration Or Tube Movement Is Not Involved..
Features
- Three piece construction - nut, sleeve and body with attached insert Use with copper, brass, aluminum, or plastic tubing
- Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved.
- Use with copper,aluminum and thermoplastic tub-ing.Not recommended for steel tubing.
- Not recommended for application using gas eous media.
- Meets specifications and standards of ASA, ASME asn SAE.
- See more on Amazon...
Brand: Legines | Manufacturer: 62
Dimensions: 4.33 x 5.51 x 1.97 inches | Weight: 0.00 pounds
See On Amazon #6
Anderson Metals 50062-06 50062 Brass Compression Tube Fitting, Union, 3/8" x 3/8" Tube OD
Asin: B000BO9DYO | Model: 50062-06 | PartNumber: 50062-06 | Ean: 0719852933755 | UPC: 719852933755
Standard Fittings Use Short Nuts.
Primary Uses Water, Gasoline, Oil And Vacuum Lines.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Easy To Disassemble No Flaring Tool Required.
Use With Copper, Brass, Aluminum, Or Plastic Tubing.
Features
- Three piece construction - nut, sleeve and body with attached insert
- Use with copper, brass, aluminum, or plastic tubing
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Anderson Metals | Manufacturer: Anderson Metals
Dimensions: 1.30 x 0.50 x 0.40 inches | Weight: 0.07 pounds
See On Amazon #7
46 PCS Compression Fittings, Brass Compression Tube Pipe Fittings Assortment Set, 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" OD Compression Union Connector and Compression Sleeves Ferrules
Asin: B0CXGZHH6B
【46Pcs Brass Compression Fittings】- The Package Of Brass Air Line Compression Fittings Include: 1/8"-4 Pcs, 3/16"-4 Pcs, 1/4"-4 Pcs, 5/16"-4 Pcs, 3/8"-4Pcs,And 1/2"-2 Pcs Compression Coupling. 1/8"-4 Pcs, 3/16"-4 Pcs, 1/4"-4 Pcs, 5/16"-4 Pcs, 3/8"-4 Pcs,And 1/2" -4 Pcs Compression Sleeves Ferrules..
【 Profetional Manufacturers 】: Made By Profetional Factory, Materials And Products Was Strictly Tested Before Leaving The Factory, This Brass Compression Tube Fittings Meet The Specifications And Standards Of Asa, Asme Asn Sae.
【Application】- Perfectly For Oil, Gas, Water And Other Non-Corrosive Or Corrosive Pipeline Systems, No Need For Welding And Flaring Tools, Easy Disassembly, Installation And Maintenance, Etc..
【Working Pressure & Tempreature】- 2000Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Features
- Excellent Brass Material - Wear-resistant, corrosion-resistant, non-rusting, high sealability, high compression strength, low magnetic permeability and high temperature ductility.
- Working Pressure & Tempreature - 2000PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- 46pcs Brass Compression Fittings - The Package of Brass air line compression fittings include: 1/8-4 pcs, 3/16-4 pcs, 1/4-4 pcs, 5/16-4 pcs, 3/8-4pcs,and 1/2-2 pcs compression coupling. 1/8-4 pcs, 3/16-4 pcs, 1/4-4 pcs, 5/16-4 pcs, 3/8-4 pcs,and 1/2 -4 pcs compression sleeves ferrules.
- Application - Perfectly for oil, gas, water and other non-corrosive or corrosive pipeline systems, no need for welding and flaring tools, easy disassembly, installation and maintenance, etc.
- Profetional Manufacturers : Made by Profetional Factory, Materials and products was strictly tested before leaving the factory, This brass compression tube fittings Meet the specifications and standards of ASA, ASME asn SAE
- See more on Amazon...
Brand: CAMNWAMN | Manufacturer: Guben Trading
See On Amazon #8
Hooshing 3PCS Compression Tube Pipe Fitting 3/8" Tube OD x 3/8" Tube OD Connector Brass Straight Coupling Adapter
Asin: B0CJV7T9SJ
【Three Piece Construction】Nut, Sleeve And Body With Attached Insert Use With Copper, Brass, Aluminum, Or Plastic Tubing.
【Package Quantity】3 Pack 3/8" X 3/8" Tube Od Compression Fitting Union Adapter..
【Widely Application】Applied In The Fuel, Air, Liquid, Oil, Gas, Vacuum, Refrigerator Water Lines.
【Function】Compression Union For Connecting Two 3/8 Inch Compression Fitting Tubes Together. Connecting And Disconnecting Two Tubes More Easily Than With A Coupling..
Features
- Solid Brass Quality brass for corrosion resistance, high temperature ductility and low magnetic permeability. Dual couplings for joining two tubes of the same diameter.
- Function Compression union for connecting two 3/8 inch compression fitting tubes together. Connecting and disconnecting two tubes more easily than with a coupling.
- Three piece construction Nut, sleeve and body with attached insert use with copper, brass, aluminum, or plastic tubing
- Widely Application Applied in the Fuel, Air, Liquid, Oil, Gas, Vacuum, refrigerator water Lines
- Package Quantity 3 Pack 3/8 x 3/8 Tube OD Compression Fitting Union Adapter.
- See more on Amazon...
Brand: Hooshing | Manufacturer: Hooshing
See On Amazon #9
HaSaoMoi D.O.T Brass Compression Straight Union Fittings, 3/8" Air Compression Union for Nylon Tubings (Pack 4)
Asin: B0BN9VV9N3 | Model: 22KC-TJ4920-4 | PartNumber: 22KC-TJ4920-4
👉【Easy To Be Installed】: The Compression Tubing Sleeve Connect Two Tube With Same Od. Take Out The Outer Sleeve And Insert The Nylon Tube In, Fasten The Outer Sleeve Into The Main Body Again. Make Sure The Small Inside Sleeve Is Kept Together With The Hose..
【Package Includes】: You Will Receive 4 Pcs 3/8" Tube Od Brass Compression Tube Fitting, Which Can Meet Your Needs Of Use And Replacement, And You Can Also Share Them With Others..
👉【Max Pressure】: Working Pressure From Vacuum To 250 Psi. Temperature Range: -40° F To +200° F（-40°C To +93°C）(Note: See Tubing Manufacturer’S Recommendations For Pressure And Temperature Mutations).
👉【Typical Application】：The Brass Compression Fittings For Nylon Tubing Can Be Used With Air Systems, Copper Tubing In Air Lines Brake Systems, Which Is Perfect For Automotive Car Or Truck Repair Or Trailers Daily Parts Replacement, Air Operated Seats, Operating Gauges, Air Horns, Heater Controls, Industrial Workshops, Daily Garden Or Lawn Mower Repair, Towing Machine Hose Connection And Air Brake Connections ..
Features
- PREMIUM MATERIAL Our Brass Compression Tube Fittings are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot compression tube fitting assortment pneumatic fittings type: 3/8"
- TYPICAL APPLICATION The brass compression fittings for nylon tubing can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair or trailers daily parts replacement, air operated seats, operating gauges, air horns, heater controls, industrial workshops, daily garden or lawn mower repair, towing machine hose connection and air brake connections .
- EASY TO BE INSTALLED : The compression tubing sleeve connect two tube with same OD. Take out the outer sleeve and insert the nylon tube in, fasten the outer sleeve into the main body again. Make sure the small inside sleeve is kept together with the hose.
- MAX PRESSURE : Working pressure from vacuum to 250 psi. Temperature Range: -40 F to +200 F -40 C to +93 C (Note: see tubing manufacturer s recommendations for pressure and temperature mutations)
- PACKAGE INCLUDES : You will receive 4 pcs 3/8 Tube OD Brass Compression Tube Fitting, which can meet your needs of use and replacement, and you can also share them with others.
- See more on Amazon...
Brand: HaSaoMoi | Manufacturer: HaSaoMoi
See On Amazon #10
Anderson Metals Brass Tube Fitting, Connector, 1/4" Compression x 1/8" Male Pipe
Asin: B000LNIGF2 | Model: 50068-0402 | PartNumber: 50068-0402 | Ean: 0719852934066 | UPC: 719852934066
Standard Fittings Use Short Nuts.
Primary Uses Water, Gasoline, Oil And Vacuum Lines.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Easy To Disassemble No Flaring Tool Required.
Use With Copper, Brass, Aluminium, Or Plastic Tubing.
Features
- Three piece construction - nut, sleeve and body with attached insert
- Use with copper, brass, aluminium, or plastic tubing
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Anderson Metals | Manufacturer: Anderson Metals
See On Amazon #11
Ice Maker Water Line Brass Compression Tube Fitting, Union, 5/16 OD x 5/16 OD, 2 Pack
Asin: B0CFTHPYM7 | Model: 5/16 Tube Pipe Fitting | PartNumber: 5/16 Tube Pipe Fitting
✅ Hex Head On Both Sides Of Adapter Provide Excellent Grip During Installation.
✅ Three Piece Construction - Nut, Sleeve And Body With Attached Insert Use With Copper, Brass, Aluminum, Or Plastic Tubing, Meets Specifications And Standards Of Asa, Asme Asn Sae..
✅ High Quality And Deep Threads Allow The Fittings To Bite Better Providing Perfect Compression For A Leak-Free Connection.
✅ Safe To Use On Copper Or Plastic Water Line Tubing.
Features
- Pack of two 5/16 OD x 5/16 OD tube fittings
- Safe to use on copper or plastic water line tubing
- Hex head on both sides of adapter provide excellent grip during installation
- High quality and deep threads allow the fittings to bite better providing perfect compression for a leak-free connection
- Three piece construction - nut, sleeve and body with attached insert Use with copper, brass, aluminum, or plastic tubing, Meets specifications and standards of ASA, ASME asn SAE.
- See more on Amazon...
Brand: bouti1583 | Manufacturer: bouti1583
See On Amazon #12
Uenede 4PCS Brass Compression Tube Fitting, Union, 3/8" Tube OD x 3/8" Tube OD Coupler Connector Pipe Fittings
Asin: B0CG11CWP3 | Model: 0ZM-IDS-03160 | PartNumber: 0ZM-IDS-03160
【Solid Brass】The Connectors Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use..
【Widely Use】Primary Uses Water, Fuel, Lquid, Gasoline, Oil, Air And Vacuum Lines. Max.Working Pressure Is 150Psi; Tempurature Range -65℉~ +250℉..
【Easy To Use】Use With Copper, Brass, Aluminum, Or Plastic Tubing. Standard Fittings Use Short Nuts..
【Three Piece Construction】Nut, Sleeve And Body With Attached Insert. Easy To Disassemble Without The Need For Flaring Tools..
Features
- Product Contains 4PCS 3/8" tube OD x 3/8" tube OD compression tube fittings.
- Three Piece Construction Nut, sleeve and body with attached insert. Easy to disassemble without the need for flaring tools.
- Solid Brass The connectors are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- Easy to Use Use with copper, brass, aluminum, or plastic tubing. Standard fittings use short nuts.
- Widely Use Primary uses water, fuel, lquid, gasoline, oil, air and vacuum lines. MAX.working pressure is 150PSI; Tempurature range -65 ~ +250 .
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #13
Brass Compression Fitting,3/8-Inch OD Compression Union,Brass Compression Tube Fitting(3/8" Tube OD x 3/8" OD Union Connector)
Asin: B0CNX737CC | Ean: 0712417964942 | UPC: 712417964942
Nut, Sleeve And Body，Teflon Tape，Comes With 1 Year Warranty..
Each Category Contains A Specific Collection Of Fast-Moving Accessories That Can Be Carried To Increase Your Efficiency When Using Your Car's Hydraulic Braking System.Compression Fittings Do Not Require Any Flaring, Soldering Or Other Type Of Tubing Preparation..
Meets Specifications And Standards Of Asa, Asme Asn Sae.Compression Unions For Joining Copper, Plastic Tubing，Brass, Or Aluminum Tubing..
Tube Size:3/8" Od.
Features
- High quality brass with corrosion resistance, high temperature ductility and low magnetic permeability.
- Tube Size:3/8 OD
- nut, sleeve and body teflon tape Comes with 1 year warranty.
- Meets specifications and standards of ASA, ASME asn SAE.Compression unions for joining copper, plastic tubing brass, or aluminum tubing.
- Each category contains a specific collection of fast-moving accessories that can be carried to increase your efficiency when using your car's hydraulic braking system.Compression Fittings do not require any flaring, soldering or other type of tubing preparation.
- See more on Amazon...
Brand: Breezliy | Manufacturer: Breezliy
See On Amazon #14
Pysrych 304 Stainless Steel Compression Tee, 3/8" OD 3 Ways Connector Tube Fitting, Pack of 2
Asin: B0BM43YQSP | Model: SS304-64-6 | PartNumber: SS304-64-6
Twin Ferrule Compression Fitting For A Leak-Resistant Seal In High-Pressure Applications..
Working Pressure: 2900Psi / 20Mpa;Temperature Range: -50-450℃ / -58℉ -842℉..
304 Stainless Steel For Higher Strength And Greater Corrosion Resistance,Good Sealing And Repeatability, Convenient Installation And Maintenance, Safe And Reliable Operation..
Tee With Three Openings For Connecting And Branching Three Pipes;.
Features
- Size: Tube OD 3/8"; Ferrule Inner Dia : 3/8".
- Tee with three openings for connecting and branching three pipes;
- Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications.
- 304 stainless steel for higher strength and greater corrosion resistance,good sealing and repeatability, convenient installation and maintenance, safe and reliable operation.
- Working Pressure: 2900psi / 20MPa;Temperature Range: -50-450 / -58 -842 .
- See more on Amazon...
Brand: Pysrych | Manufacturer: Pysrych
See On Amazon #15
Anderson Metals-00068-0508 Brass Tube Fitting, Connector, 5/16" Compression x 1/2" Male Pipe
Asin: B006PKJDD4 | Model: 00068-0508 | PartNumber: 00068-0508 | Ean: 0719852100973 | UPC: 719852100973
Standard Fittings Use Short Nuts.
Primary Uses Water, Gasoline, Oil And Vacuum Lines.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Easy To Disassemble No Flaring Tool Required.
Use With Copper, Brass, Aluminum, Or Plastic Tubing.
Features
- Three piece construction - nut, sleeve and body with attached insert
- Use with copper, brass, aluminum, or plastic tubing
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: ANDERSON | Manufacturer: Anderson Metals
Dimensions: 1.00 x 2.00 x 1.00 inches
See On Amazon #16
Anderson Metals-50066-0604 Brass Tube Fitting, Coupling, 3/8" Compression x 1/4" Female Pipe
Asin: B003RWJTWS | Model: 50066-0604 | PartNumber: 50066-0604 | Ean: 0719852933960 | UPC: 719852933960
Standard Fittings Use Short Nuts.
Primary Uses Water, Gasoline, Oil And Vacuum Lines.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Easy To Disassemble No Flaring Tool Required.
Use With Copper, Brass, Aluminium, Or Plastic Tubing.
Features
- Three piece construction - nut, sleeve and body with attached insert
- Use with copper, brass, aluminium, or plastic tubing
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Anderson Metals | Manufacturer: Anderson Metals
Dimensions: 1.00 x 2.00 x 2.00 inches | Weight: 0.06 Pounds
See On Amazon #17
Anderson Metals - 54048-1006 Brass Compression Tube Fitting, Half-Union, 5/8" Flare Tube O.D. x 3/8" Male Pipe
Asin: B003RW39QK | Model: 54048-1006 | PartNumber: 54048-1006 | Ean: 0719852120575 | UPC: 719852120575
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Resists Mechanical Pullout For A More Secure Connection.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Temperature Range Of -65 To +250 Degrees F.
45-Degree Flare Head Tube Connection On One Side And A Male Npt Connection On The Other.
Features
- Half union for connecting and disconnecting two tubes more easily than with a coupling
- 45-degree flare head tube connection on one side and a male NPT connection on the other
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperature range of -65 to +250 degrees F
- Resists mechanical pullout for a more secure connection
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: ANDERSON | Manufacturer: Anderson Metals
Dimensions: 1.00 x 2.00 x 1.00 inches | Weight: 0.30 Pounds
See On Amazon #18
Anderson Metals - 50062-08 50062 Brass Compression Tube Fitting, Union, 1/2" x 1/2" Tube OD
Asin: B000KE3TGI | Model: 50062-08 | PartNumber: 50062-08 | Ean: 0719852933762 | UPC: 719852933762
Standard Fittings Use Short Nuts.
Primary Uses Water, Gasoline, Oil And Vacuum Lines.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Easy To Disassemble No Flaring Tool Required.
Use With Copper, Brass, Aluminum, Or Plastic Tubing.
Features
- Three piece construction - nut, sleeve and body with attached insert
- Use with copper, brass, aluminum, or plastic tubing
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Anderson Metals | Manufacturer: Anderson Metals
Weight: 0.00 Pounds
See On Amazon #19
Anderson Metals Brass Tube Fitting, Tee, 3/8" Compression x 3/8" Bottom Male Pipe
Asin: B0044EXGXQ | Model: 50072-0606 | PartNumber: 50072-0606 | Ean: 0719852934325 | UPC: 719852934325
Standard Fittings Use Short Nuts.
Primary Uses Water, Gasoline, Oil And Vacuum Lines.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Easy To Disassemble No Flaring Tool Required.
Use With Copper, Brass, Aluminum, Or Plastic Tubing.
Features
- Three piece construction - nut, sleeve and body with attached insert
- Use with copper, brass, aluminum, or plastic tubing
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Anderson Metals | Manufacturer: Anderson Metals
Weight: 0.13 pounds
See On Amazon #20
SHUATI Brass Compression Tube Fitting,Union Assortment Kits,5Pcs 1/4" OD x 1/4" OD Compression Union(5Pcs)
Asin: B0CYC5PSLH
Three Piece Construction: Nut, Sleeve And Body With Attached Insert. Easy To Disassemble No Flaring Tool Required..
Customer Service:If You Encounter Any Product Problems, Please Feel Free To Contact Us, We Will Provide You With Quality After-Sales Service.
Advantage: Brass For Corrosion Re-Sistance, Ductility At High Temperatures, And Low Magnetic Permeability..
Size: 1/4"" Tube Od X 1/4"" Tube Od..
Features
- Package Included: 1/5Pcs Brass Compression Tube Fitting
- Size: 1/4 Tube OD x 1/4 Tube OD.
- Three Piece Construction: Nut, sleeve and body with attached insert. Easy to disassemble no flaring tool required.
- Advantage: Brass for corrosion re-sistance, ductility at high temperatures, and low magnetic permeability.
- Customer Service:If you encounter any product problems, please feel free to contact us, we will provide you with quality after-sales service
- See more on Amazon...
Brand: SHUATI | Manufacturer: SHUATI
See On Amazon #21
Hooshing 3PCS Brass Compression Fitting 1/4" Tube OD x 1/4" OD Union Connector Straight Coupling
Asin: B0CW57P73H
【Three Piece Construction】Nut, Sleeve And Body With Attached Insert Use With Copper, Brass, Aluminum, Or Plastic Tubing..
【Package Quantity】3 Pack 1/4" X 1/4" Brass Tubing Compression Fittings Union Adapters..
【Widely Application】Good Sealing And Repeatability, Temperature And Pressure Resistance. Applied In The Fuel, Air, Liquid, Oil, Gas, Vacuum, Refrigerator Water Lines..
【Function】Compression Union For Connecting Two 1/4 Inch Compression Fitting Tubes Together. Connecting And Disconnecting Two Tubes More Easily Than With A Coupling..
Features
- Solid Brass Quality brass for corrosion resistance, high temperature ductility and low magnetic permeability. Dual couplings for joining two tubes of the same diameter.
- Function Compression union for connecting two 1/4 inch compression fitting tubes together. Connecting and disconnecting two tubes more easily than with a coupling.
- Three piece construction Nut, sleeve and body with attached insert use with copper, brass, aluminum, or plastic tubing.
- Widely Application Good sealing and repeatability, temperature and pressure resistance. Applied in the Fuel, Air, Liquid, Oil, Gas, Vacuum, refrigerator water Lines.
- Package Quantity 3 Pack 1/4 x 1/4 Brass Tubing Compression Fittings Union Adapters.
- See more on Amazon...
Brand: Hooshing | Manufacturer: Hooshing
See On Amazon #22
SHUATI Brass Compression Tube Fitting,Union Assortment Kits,5Pcs 1/4" OD x 1/4" OD Compression Union(1Pc)
Asin: B0CYC746VF
Three Piece Construction: Nut, Sleeve And Body With Attached Insert. Easy To Disassemble No Flaring Tool Required..
Customer Service:If You Encounter Any Product Problems, Please Feel Free To Contact Us, We Will Provide You With Quality After-Sales Service.
Advantage: Brass For Corrosion Re-Sistance, Ductility At High Temperatures, And Low Magnetic Permeability..
Size: 1/4"" Tube Od X 1/4"" Tube Od..
Features
- Package Included: 1/5Pcs Brass Compression Tube Fitting
- Size: 1/4 Tube OD x 1/4 Tube OD.
- Three Piece Construction: Nut, sleeve and body with attached insert. Easy to disassemble no flaring tool required.
- Advantage: Brass for corrosion re-sistance, ductility at high temperatures, and low magnetic permeability.
- Customer Service:If you encounter any product problems, please feel free to contact us, we will provide you with quality after-sales service
- See more on Amazon...
Brand: SHUATI | Manufacturer: SHUATI
See On Amazon #23
FEIYING Brass Compression Tube Fitting,Union Assortment Kits,5Pcs 1/4" OD x 1/4" OD Compression Union(1Pc)
Asin: B0CYBZQK9S
Three Piece Construction: Nut, Sleeve And Body With Attached Insert. Easy To Disassemble No Flaring Tool Required..
Customer Service:If You Encounter Any Product Problems, Please Feel Free To Contact Us, We Will Provide You With Quality After-Sales Service.
Advantage: Brass For Corrosion Re-Sistance, Ductility At High Temperatures, And Low Magnetic Permeability..
Size: 1/4"" Tube Od X 1/4"" Tube Od..
Features
- Package Included: 1/5Pcs Brass Compression Tube Fitting
- Size: 1/4 Tube OD x 1/4 Tube OD.
- Three Piece Construction: Nut, sleeve and body with attached insert. Easy to disassemble no flaring tool required.
- Advantage: Brass for corrosion re-sistance, ductility at high temperatures, and low magnetic permeability.
- Customer Service:If you encounter any product problems, please feel free to contact us, we will provide you with quality after-sales service
- See more on Amazon...
Brand: FEIYING | Manufacturer: FEIYING
See On Amazon #24
FEIYING Brass Compression Tube Fitting,Union Assortment Kits,5Pcs 1/4" OD x 1/4" OD Compression Union(5Pcs)
Asin: B0CYBW1LZP
Three Piece Construction: Nut, Sleeve And Body With Attached Insert. Easy To Disassemble No Flaring Tool Required..
Customer Service:If You Encounter Any Product Problems, Please Feel Free To Contact Us, We Will Provide You With Quality After-Sales Service.
Advantage: Brass For Corrosion Re-Sistance, Ductility At High Temperatures, And Low Magnetic Permeability..
Size: 1/4"" Tube Od X 1/4"" Tube Od..
Features
- Package Included: 1/5Pcs Brass Compression Tube Fitting
- Size: 1/4 Tube OD x 1/4 Tube OD.
- Three Piece Construction: Nut, sleeve and body with attached insert. Easy to disassemble no flaring tool required.
- Advantage: Brass for corrosion re-sistance, ductility at high temperatures, and low magnetic permeability.
- Customer Service:If you encounter any product problems, please feel free to contact us, we will provide you with quality after-sales service
- See more on Amazon...
Brand: FEIYING | Manufacturer: FEIYING
See On Amazon #25
LRFDRESS vacuums Replacement Parts For iRobot Roomba E&I Series E5 E6 i7 i7+ i3 i3+ i4 i4+ i6 i6+ j7 j7+ i8 i8+, 2 rubber main brushes, 5 filters, 5 side brushes Parts accessories
Asin: B0CRLGQSW7 | Model: E5 E6 | PartNumber: E5 E6
All You Need Inside The Package.
5. Package: 5 X Filter, 5 X Sweeping Brush, 2 X Rubber Brush.
Please Clean The Filter After Using The Roomba, Replace The Brush And Filter Every 2-4 Months To Make The Vacuum Work At High Power.
This Kit Is Not Compatible With Other Roomba Models,Please Check Your Parts Before Ordering.
Features
- LRFDRESS vacuums replacement spare parts for iRobot roomba i series i3+ i4+ i6+ i7+ i8+ 5 x filter, 5 x sweeping brush, 2 x rubber brush
- This kit is not compatible with other Roomba models,please check your parts before ordering
- all you need inside the package
- Please clean the filter after using the Roomba, replace the brush and filter every 2-4 months to make the vacuum work at high power
- 5. Package: 5 x filter, 5 x sweeping brush, 2 x rubber brush
- See more on Amazon...
Brand: LRFDRESS | Manufacturer: LRFDRESS
Dimensions: 1.18 x 7.87 x 7.87 inches | Weight: 0.46 Pounds
See On Amazon #26
LRFDRESS Vacuum Cleaner Wall Mount Charging Station Docking Station for Dyson V7 V8 V11 V15 Cordless Vacuum Cleaner ACCESSORIES,967741-01
Asin: B0CBZ9Q87F | Model: 967741-01 | PartNumber: 967741-01
3. Made Of High Quality Abs Plastic, Elegant And Durable, Long Service Life..
5. Package: 1 Piece Charging Bracket.
4. Save Space: Made Of High Quality Plastic, Super Heavy Ability, Not Easy To Break..
2. Wall Mount Charging Station Compatible With Dyson V7 V8 967741-01 Vacuum Cleaner. For Example: V7, V7 Animal, V7 Motorhead, V7 Total And V8, V8 Animal, V8 Absolute, V8 Overall.
Features
- 1. LRFDRESS Charging Bracket: Wall mount for wireless charging stations compatible with Dyson V7 V8 V11 V15 (Note: charger not included)
- 2. Wall mount charging station compatible with Dyson V7 V8 967741-01 vacuum cleaner. For example: V7, V7 Animal, V7 Motorhead, V7 Total and V8, V8 Animal, V8 Absolute, V8 overall
- 3. Made of high quality ABS plastic, elegant and durable, long service life.
- 4. Save space: made of high quality plastic, super heavy ability, not easy to break.
- 5. Package: 1 piece charging bracket
- See more on Amazon...
Brand: LRFDRESS | Manufacturer: LRFDRESS
Dimensions: 2.83 x 12.60 x 3.74 inches | Weight: 0.23 Kilograms
See On Amazon #27
Stainless Steel SS316 Pipe Fitting, Boss, 1 1/4" NPT Female thread 3000 psi
Asin: B0CXHTJKPF | Ean: 8886009005602
Excellent Performance In High Pressure Application As It Has A Working Pressure Up To 3000 Psi. Ideal For Application Where High Pressure Or Extremely Corrosive Conditions Exist..
Similar Functionality With Weldolet Fittings..
One Npt Female Threaded End And One Butt Welded End. Boss Fitting Is Made In Accordance To Asme B16.11 Standard..
Higher Quality As It Has Higher Strength To Withstand Higher Pressure. The Fitting Is Molded Using Compressive Force And High Heat And Pressure. The Grain Size Will Be More Refined Resulting In Higher Strength And Resistance To External Impacts..
Features
- Resistance against corrosion and rust as this boss fitting is made of stainless steel SS316 material.
- Higher quality as it has higher strength to withstand higher pressure. The fitting is molded using compressive force and high heat and pressure. The grain size will be more refined resulting in higher strength and resistance to external impacts.
- Excellent performance in high pressure application as it has a working pressure up to 3000 PSI. Ideal for application where high pressure or extremely corrosive conditions exist.
- One NPT female threaded end and one butt welded end. Boss fitting is made in accordance to ASME B16.11 standard.
- Similar functionality with weldolet fittings.
- See more on Amazon...
Brand: RFS | Manufacturer: RFS
Weight: 1.32 pounds
See On Amazon #28
Anderson Metals-50068-0502 Brass Tube Fitting, Connector, 5/16" Compression x 1/8" Male Pipe
Asin: B000BO4XCQ | Model: 50068-0502 | PartNumber: 50068-0502 | Ean: 0719852934103 | UPC: 719852934103
Standard Fittings Use Short Nuts.
Primary Uses Water, Gasoline, Oil And Vacuum Lines.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Easy To Disassemble No Flaring Tool Required.
Use With Copper, Brass, Aluminum, Or Plastic Tubing.
Features
- Three piece construction - nut, sleeve and body with attached insert
- Use with copper, brass, aluminum, or plastic tubing
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Anderson Metals | Manufacturer: Anderson Metals
See On Amazon #29
Pysrych 3/16" OD x 1/4" OD Compression Reducing Union Brass Compression Fitting (Pack of 2)
Asin: B09DK1Z9PX | Ean: 0719793938635 | UPC: 719793938635
Brass For Corrosion Resistance, High Temperature Ductility And Low Magnetic Permeability..
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Use With Copper, Brass, Aluminum, Or Plastic Tubing..
Compression Fittings Do Not Require Any Flaring, Soldering Or Other Type Of Tubing Preparation..
Features
- Reducer union for connecting and disconnecting two tubes of different diameter(OD: Outer Diameter), more easily than with a coupling.
- Compression Fittings do not require any flaring, soldering or other type of tubing preparation.
- Brass for corrosion resistance, high temperature ductility and low magnetic permeability.
- Use with copper, brass, aluminum, or plastic tubing.
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: N\C | Manufacturer: N\C
See On Amazon #30
GASHER 52PCS Brass Compression Tube Pipe Fitting Connector KIT, 3/16", 1/4", 1/2", 1/8", 5/16", 5/8", 3/8", Tube OD x Tube OD, Tube OD x NPT
Asin: B0C3GNN2L7 | Model: JQ-818 | PartNumber: JQ-818
Features: Good Airtightness, Pressure Resistance, Not Easy To Trip,Npt Thread Size Does Not Actual Diameter, It Is Only Nominal Pipe Size..
Package Include：52 Pcs Brass Compression Union Tube Fitting.
Max.Working Pressure Is 150Psi;Tempurature Range -65℉~ +250℉.
Widely Used: Widely Used In The Fuel/Air/Lquid/Oil/Gas/Vacuum Lines.
Features
- Material: Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability
- Widely Used: Widely Used In The Fuel/Air/Lquid/Oil/Gas/Vacuum Lines
- Features: Good Airtightness, Pressure Resistance, Not Easy To Trip,NPT thread size does not actual diameter, it is only nominal pipe size.
- MAX.Working Pressure is 150PSI;Tempurature Range -65 ~ +250
- Package Include 52 pcs Brass Compression Union Tube Fitting
- See more on Amazon...
Brand: GASHER | Manufacturer: GASHER
Warranty: 1 Year Warranty
See On Amazon
Looking For Something Else?
Search