Best rack & pinion gears - Buying Guide
Last Updated: 05/03/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
PGFUN 1:1 Right Angle Bevel Gearbox 1 Module 20 Teeth 90 Angle Drive Steering Gear Device Simple Mechanical DIY Module with 6mm Shaft
Asin: B09V5R7TLF | Model: TYXC-0010_1-1_6 | PartNumber: TYXC-0010_1-1_6 | Ean: 0771077589391 | UPC: 771077589391
Motor Drive Can Be Realized With Coupling And Belt Pulley Gear, Built -In Ball Bearing For Smoothly Rotating..
Note: It's Simple Steering Gear, Can Not Used For High Troque And High Rotating Speed Cnc Application..
Material: Aluminum Alloy & #45 Steel, Overall Size: 100 X 75 X 25 Mm ..
Specification: 1 Module, 20 Teeth, Bevel Gear With 2 X M4 Screw Holes, 6Mm Shaft..
Features
- 1:1 Right Angle Bevel Gearbox for Simple DIY Mechanical Application.
- Specification: 1 module, 20 teeth, bevel gear with 2 x M4 screw holes, 6mm shaft.
- Motor drive can be realized with coupling and belt pulley gear, built -in ball bearing for smoothly rotating.
- Material: Aluminum alloy & #45 Steel, Overall Size: 100 x 75 x 25 mm .
- Note: it's simple steering gear, can not used for high troque and high rotating speed CNC application.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 0.98 x 4.13 x 2.95 inches | Weight: 1.30 Kilograms
See On Amazon #2
15mm Shaft Right 90 Angle Bevel Gearbox 1.5 Module 1:1 Right Angle Bevel Gearbox for Simple Mechanical Application 20 Teeth
Asin: B0CX5DMD8P
Size:3.5 Inch X 2 Inch X 3 Inch..
If There Is Any Product Problem During This Period, Please Feel Free To Contact Us, We Will Reply Within Twelve Hours..
Warranty: We Provide Each Customer With 1 Year Warranty Period.Before Ordering, Please Check Product Description..
Using High-Quality Aluminum Alloy, The Surface Process Is Galvanized..
Features
- Guaranteed quality: Made of high quality materials, strong stability, higher practicality.
- Using high-quality aluminum alloy, the surface process is galvanized.
- Size:3.5 inch x 2 inch x 3 inch.
- Warranty: We provide each customer with 1 year warranty period.Before ordering, Please check product description.
- if there is any product problem during this period, please feel free to contact us, we will reply within twelve hours.
- See more on Amazon...
Brand: tpengine | Manufacturer: tpengine
See On Amazon #3
PGFUN 1:1 Right Angle Tapered Bevel Gearbox 1.5 Module 20 Teeth 90 Angle Drive Steering Gear Device Simple Mechanical DIY Module with 15mm Shaft
Asin: B0CKTSB8DP | Ean: 0777723136964 | UPC: 777723136964
Motor Drive Can Be Realized With Coupling And Belt Pulley Gear..
Note: It's Simple Steering Gearbox, Can Not Used For High Accuracy Cnc Application..
Material: Aluminum Alloy & #45 Steel, The Input And Output Shafts Take The Blackening Or Galvanizing Process (Random), Overall Size: 90.3 X 84 X 46 Mm/ 3.6 X 3.3 X 1.8 Inch..
Specification: Built-In 1.5 Module 20 Teeth Bevel Gears, 15 Mm/ 0.6" Shaft, Max Axis Loading: 30 Kgs/ 66.1 Lbs, Max Torque Rating: 5 N.M/ 3.6 Ft.Lbs, Max Rotation Speed: 1200 Rpm, Backlash: 5 Degree, If 3D File (Stp) Is Needed, Free To Contact Us..
Features
- 1:1 L-shaped Right Angle Bevel Gearbox for Simple DIY Mechanical Application, 1 Input Shaft Drives 1 Short Output Shaft.
- Specification: built-in 1.5 module 20 teeth bevel gears, 15 mm/ 0.6 shaft, Max Axis Loading: 30 kgs/ 66.1 lbs, max torque rating: 5 N.M/ 3.6 ft.lbs, max rotation speed: 1200 rpm, backlash: 5 degree, if 3D file (stp) is needed, free to contact us.
- Motor drive can be realized with coupling and belt pulley gear.
- Material: Aluminum alloy & #45 Steel, the input and output shafts take the blackening or galvanizing process (random), Overall Size: 90.3 x 84 x 46 mm/ 3.6 x 3.3 x 1.8 inch.
- Note: it's simple steering gearbox, can not used for high accuracy CNC application.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
See On Amazon #4
PGFUN 1:1 Right Angle Tapered Bevel Gearbox Mini 1 Module 20 Teeth 90 Angle Drive Steering Gear Device Simple Mechanical DIY Module with 8mm Shaft
Asin: B0BJVKJ175 | Model: TYXC-0046 | PartNumber: TYXC-0046 | Ean: 0777723135431 | UPC: 777723135431
Motor Drive Can Be Realized With Coupling And Belt Pulley Gear..
Note: It's Simple Steering Gear, Not Recommended For High Torque And High Accuracy Cnc Application..
Material: Aluminum Alloy With Sandblasting Oxidation & Stainless Steel Shaft, Overall Size: 56.2 X 30 X 56.2 Mm/ 2.2 X 1.2 X 2.2 Inch..
Specification: Built-In 1 Module 20 Teeth Bevel Gears, 8 Mm/ 0.3" Shaft, Max Torque Rating: 5 N.M/ 3.6 Ft.Lbs , Max Rotation Speed: 1500 Rpm, Backlash: 5 Degree, If 3D File(Stp) Is Needed, Free To Contact Us..
Features
- 1:1 L-shaped Right Angle Bevel Gearbox for Simple DIY Mechanical Application, 1 Input Shaft Drives 1 Short Output Shaft.
- Specification: built-in 1 module 20 teeth bevel gears, 8 mm/ 0.3 shaft, max torque rating: 5 N.M/ 3.6 ft.lbs , max rotation speed: 1500 rpm, backlash: 5 degree, if 3D file(stp) is needed, free to contact us.
- Motor drive can be realized with coupling and belt pulley gear.
- Material: Aluminum alloy with sandblasting oxidation & Stainless Steel Shaft, Overall Size: 56.2 x 30 x 56.2 mm/ 2.2 x 1.2 x 2.2 inch.
- Note: it's simple steering gear, not recommended for high torque and high accuracy CNC application.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 1.18 x 2.20 x 2.20 Inches | Weight: 0.10 Kilograms
See On Amazon #5
uxcell Pinion Gear Set, Brass Motor Rack Straight Spur Gear with Step, 0.5 Mod 20T 5mm Bore 11mm Outer Dia, M3 Set Screws Included
Asin: B0B7BFBG66 | Model: a22051200ux0649 | PartNumber: a22051200ux0649
Easy To Use: Be Sure Your Rc Motor Shaft Have The Same Diameter. Comes With Set Screws For Each Pinion Gear, Easy To Install. Hardness Of Teeth Surface: Soft Teeth Surface..
Package Content: 1Pcs X Pinion Gear, 2Pcs X M3 Set Screws. Good Pinion Gear Replacement For Your Equipment..
Tips: Release The Motor To Install The Pinion. Make Sure To Lock It On The Flat Part Of The Motor Shaft..
Brass Parts: The Brass Pinion Gear Has Strong Wear Resistance, High Strength, High Hardness And Chemical Corrosion Resistance..
Features
- Pinion Gear: Model: 0.5 Mod; Teeth: 20T; Bore Size (Shaft Dia.): 5mm / 0.2"; Outer Dia. (Teeth Part): 11mm / 0.43"; Effective Teeth Length: 5mm / 0.2"; Step Size: 9mm x 5mm / 0.35" x 0.2" (D*H)
- Brass Parts: The brass pinion gear has strong wear resistance, high strength, high hardness and chemical corrosion resistance.
- Easy to Use: Be sure your RC motor shaft have the same diameter. Comes with set screws for each pinion gear, easy to install. Hardness of teeth surface: soft teeth surface.
- Tips: Release the motor to install the pinion. Make sure to lock it on the flat part of the motor shaft.
- Package Content: 1pcs x Pinion Gear, 2pcs x M3 Set Screws. Good pinion gear replacement for your equipment.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
Bansbach Easylift ROP-020P2-1 Gear Rack
Asin: B01IWH2B0O | Model: ROP-020P2-1 | PartNumber: ROP-020P2-1
Gear Rack Height: 7. 5Mm.
This Part Is Only Compatible With Frn-P2 Series Dampers.
Gear Rack Tooth Pressure Angle: 20.
Gear Rack Width: 11. 5Mm.
Features
- ROP-020P2-1, Gear rack length: 400mm
- Gear rack width: 11. 5mm
- Gear rack height: 7. 5mm
- Gear rack tooth pressure angle: 20
- This part is ONLY compatible with FRN-P2 series dampers
- See more on Amazon...
First Available: 03/12/2017
Brand: Bansbach | Manufacturer: Bansbach Easylift
See On Amazon #7
uxcell Pinion Gear Set, Brass Motor Rack Straight Spur Gear with Step, 0.5 Mod 40T 6mm Bore 21mm Outer Dia, M3 Set Screws Included
Asin: B0B7B25DWK | Model: a22051200ux0644 | PartNumber: a22051200ux0644
Easy To Use: Be Sure Your Rc Motor Shaft Have The Same Diameter. Comes With Set Screws For Each Pinion Gear, Easy To Install. Hardness Of Teeth Surface: Soft Teeth Surface..
Package Content: 1Pcs X Pinion Gear, 2Pcs X M3 Set Screws. Good Pinion Gear Replacement For Your Equipment..
Tips: Release The Motor To Install The Pinion. Make Sure To Lock It On The Flat Part Of The Motor Shaft..
Brass Parts: The Brass Pinion Gear Has Strong Wear Resistance, High Strength, High Hardness And Chemical Corrosion Resistance..
Features
- Pinion Gear: Model: 0.5 Mod; Teeth: 40T; Bore Size (Shaft Dia.): 6mm / 0.24"; Outer Dia. (Teeth Part): 21mm / 0.83"; Effective Teeth Length: 5mm / 0.2"; Step Size: 18mm x 5mm / 0.71" x 0.2" (D*H)
- Brass Parts: The brass pinion gear has strong wear resistance, high strength, high hardness and chemical corrosion resistance.
- Easy to Use: Be sure your RC motor shaft have the same diameter. Comes with set screws for each pinion gear, easy to install. Hardness of teeth surface: soft teeth surface.
- Tips: Release the motor to install the pinion. Make sure to lock it on the flat part of the motor shaft.
- Package Content: 1pcs x Pinion Gear, 2pcs x M3 Set Screws. Good pinion gear replacement for your equipment.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell Pinion Gear Set, 45# Carbon Steel Motor Rack Spur Gear with Step Black, 0.5 Mod 28T 6mm Bore 15mm Outer Dia, M3 Set Screws Included
Asin: B0B7BQS7GV | Model: a22051200ux0593 | PartNumber: a22051200ux0593
Surface Treatment: Frequency Hardened Parts Have Higher Wear Resistance, Higher Strength And Lower Notch Sensitivity. Blackened Surface Can Effectively Prevent Rust And Oxidation..
Tips: Release The Motor To Install The Pinion. Make Sure To Lock It On The Flat Part Of The Motor Shaft. Good Pinion Gear Replacement For Your Equipment..
Easy To Use: Be Sure Your Rc Motor Shaft Have The Same Diameter. Comes With Set Screws For Each Pinion Gear, Easy To Install. Hardness Of Teeth Surface: Hard Teeth Surface..
45# Carbon Steel: Made Of 45# Carbon Steel, The Pinion Gear Has Better Hardness, Higher Strength And Resistance To Deformation Than Ordinary A3 Steel..
Features
- Pinion Gear: Model: 0.5 Mod; Teeth: 28T; Bore Size (Shaft Dia.): 6mm / 0.24"; Outer Dia. (Teeth Part): 15mm / 0.59"; Effective Teeth Length: 5mm / 0.2"; Step Size: 12mm x 5mm / 0.47" x 0.2" (D*H)
- 45# Carbon Steel: Made of 45# carbon steel, the pinion gear has better hardness, higher strength and resistance to deformation than ordinary A3 steel.
- Surface Treatment: Frequency hardened parts have higher wear resistance, higher strength and lower notch sensitivity. Blackened surface can effectively prevent rust and oxidation.
- Easy to Use: Be sure your RC motor shaft have the same diameter. Comes with set screws for each pinion gear, easy to install. Hardness of teeth surface: hard teeth surface.
- Tips: Release the motor to install the pinion. Make sure to lock it on the flat part of the motor shaft. Good pinion gear replacement for your equipment.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
1.5Mod 15T Hardened Steel Pinion Gear Motor Gear with Step Bore 12mm Outer Dia 25.5mm Teeth Height 12mm with Set Screws (Bore 12mm)
Asin: B08HMJDMQ3 | Ean: 8935488252462
Material: #45 Steel.
Teeth Thickness: 12Mm; Teeth Outer Diameter: 25.5Mm; Total Height: 20Mm.
Surface Treatment: Teeth High-Frequency Hardening.
Cnc Machined- Hardened Steel To Increased Wear Resistance And Improve Fatigue Life.
Features
- Hardened steel 1.5Mod 15 Teeth pinion gear for motors
- CNC machined- Hardened steel to increased wear resistance and improve fatigue life
- Material: #45 steel
- Surface treatment: teeth high-frequency hardening
- Teeth thickness: 12mm; teeth outer diameter: 25.5mm; total height: 20mm
- See more on Amazon...
Brand: MF-Tools | Manufacturer: MF-Tools
See On Amazon #10
PGFUN 1:1 Manual Right Angle Tapered Bevel Gearbox with Handle 1.5 Module 20 Teeth 90 Angle Drive Steering Gear Device Simple Mechanical DIY Module with 15mm Shaft
Asin: B0BNBVDF7P | Model: TYXC-0049 | PartNumber: TYXC-0049 | Ean: 0777723135707 | UPC: 777723135707
Come With Handle For Manually Right Angle Mechanical Transmission..
Note: It's Simple Steering Gearbox, Can Not Used For High Accuracy Cnc Application..
Material: Aluminum Alloy & #45 Steel, Overall Size: 86.8 X 48 X 53 Mm/ 3.4 X 1.9 X 2 Inch..
Specification: Built-In 1.5 Module 20 Teeth Bevel Gears, 15 Mm/ 0.6" Shaft, Max Axis Loading: 50 Kgs/ 112 Lbs, Max Torque Rating: 5 N.M/ 3.6 Ft.Lbs, Max Rotation Speed: 1000 Rpm.
Features
- 1:1 Manual Right Angle Bevel Gearbox with Handle for Simple DIY Mechanical Transmission Application.
- Specification: built-in 1.5 module 20 teeth bevel gears, 15 mm/ 0.6 shaft, Max Axis Loading: 50 kgs/ 112 lbs, max torque rating: 5 N.M/ 3.6 ft.lbs, max rotation speed: 1000 rpm
- Come with handle for manually right angle mechanical transmission.
- Material: Aluminum alloy & #45 Steel, Overall Size: 86.8 x 48 x 53 mm/ 3.4 x 1.9 x 2 inch.
- Note: it's simple steering gearbox, can not used for high accuracy CNC application.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 2.09 x 3.39 x 1.89 inches | Weight: 0.30 Kilograms
See On Amazon #11
Yibuy 2PCS 2 Modulus 20 Teeth 14mm Hole Dia 90 Degrees Tapered Bevel Gear 45# Steel
Asin: B07FGD53WQ | Model: M7180313016 | PartNumber: M7180313016
【Description】1 To 1 Bevel Gear (Can Only Be Matched With 1 To 1, And Cannot Be Matched With Other Modulus T).
【Size】The Hole Diameter Of The Product Is 14Mm; The Height Is 27Mm; The Maximum Outer Diameter Is 42Mm, Please Check The Size Before Purchasing..
【Material】Made Of 45# Steel, More Stable, Hard And Firm, Durable, Can Provide You With Long-Term Service..
【Operation】The Contact Between The Gears Is Firm, Which Ensures The Normal Operation Of The Machine And Good Carrying Capacity..
Features
- Application Widely used in transportation, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc.
- Operation The contact between the gears is firm, which ensures the normal operation of the machine and good carrying capacity.
- Description 1 to 1 bevel gear (can only be matched with 1 to 1, and cannot be matched with other modulus T)
- Material Made of 45# steel, more stable, hard and firm, durable, can provide you with long-term service.
- Size The hole diameter of the product is 14mm; the height is 27mm; the maximum outer diameter is 42mm, please check the size before purchasing.
- See more on Amazon...
Brand: Yibuy | Manufacturer: etfshop
Weight: 0.55 pounds
See On Amazon #12
DINGGUANGHE-CUP Durable 1PC 1.5M Gear Rack/Straight Teeth Rack Steel Side Fixing Hole Harden+1pc 1.5M 20 Teeth Hole6/8/10/12/14/15/16 (Color : 1.5M20T hole10, Guide Length : 15X15 1500mm)
Asin: B0986TNHB8 | Ean: 8306056621353
Material: Fulll Range Of 45# Steel.
Quenching: No.
Pressure Angle: 20 Degree.
Please Select The Model You Need To Place An Order..
Features
- Package include: 1PC 1.5M Straight rack guide +1PC 1.5M20T hole6/8/10/12/14/15/16 Convex gear
- Please select the model you need to place an order.
- Material: Fulll range of 45# steel
- Pressure angle: 20 degree
- Quenching: No
- See more on Amazon...
Brand: DINGGUANGHE-CUP | Manufacturer: DINGGUANGHE-US
Weight: 0.00 pounds
See On Amazon #13
PGFUN 1:1 Right Angle Tapered Bevel Gearbox 1.5 Module 20 Teeth 90 Angle Drive Steering Gear Device Simple Mechanical DIY Module with 15mm Shaft
Asin: B0C9ZVK4JL | Ean: 0777723136391 | UPC: 777723136391
Motor Drive Can Be Realized With Coupling And Belt Pulley Gear..
Note: It's Simple Steering Gear, Can Not Used For High Torque And High Accuracy Cnc Application..
Material: Aluminum Alloy & #45 Steel With Galvanization Process, Overall Size: 86.8 X 48 X 73 Mm/ 3.4 X 1.9 X 2.9 Inch..
Specification: Built-In 1.5 Module 20 Teeth Bevel Gears, 15 Mm/ 0.6" Shaft, Max Torque Rating: 5 N.M/ 3.6 Ft.Lbs , Max Rotation Speed: 1000 Rpm.
Features
- 1:1 Right Angle Bevel Gearbox for Simple DIY Mechanical Application.
- Specification: built-in 1.5 module 20 teeth bevel gears, 15 mm/ 0.6 shaft, max torque rating: 5 N.M/ 3.6 ft.lbs , max rotation speed: 1000 rpm
- Motor drive can be realized with coupling and belt pulley gear.
- Material: Aluminum alloy & #45 Steel with galvanization process, Overall Size: 86.8 x 48 x 73 mm/ 3.4 x 1.9 x 2.9 inch.
- Note: it's simple steering gear, can not used for high torque and high accuracy CNC application.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
See On Amazon #14
1622005100 1622005200 Drive Gearwheel Gear Set Fits ATLAS COPCO Air Compressor
Asin: B08D6H6VT9 | Ean: 0779640249468 | UPC: 779640249468
Ensure To Meet Original Maunfacturing Standard.
Free Expedited Shipping.
High Quality Raw Materials,Cost-Effective,Reduce Maintenance Cost..
Features
- Direct Replacement & Product Compatibility 100%
- High Quality Raw Materials,Cost-Effective,Reduce Maintenance Cost.
- Ensure To Meet Original Maunfacturing Standard
- FREE EXPEDITED SHIPPING
- See more on Amazon...
Brand: MAKO AIRTEK | Manufacturer: MAKO PARTS
See On Amazon #15
uxcell Pinion Gear Set, 45# Carbon Steel Motor Rack Spur Gear with Step Black, 0.5 Mod 58T 8mm Bore 30mm Outer Dia, M4 Set Screws Included
Asin: B0B7B8MM92 | Model: a22051200ux0608 | PartNumber: a22051200ux0608
Surface Treatment: Frequency Hardened Parts Have Higher Wear Resistance, Higher Strength And Lower Notch Sensitivity. Blackened Surface Can Effectively Prevent Rust And Oxidation..
Tips: Release The Motor To Install The Pinion. Make Sure To Lock It On The Flat Part Of The Motor Shaft. Good Pinion Gear Replacement For Your Equipment..
Easy To Use: Be Sure Your Rc Motor Shaft Have The Same Diameter. Comes With Set Screws For Each Pinion Gear, Easy To Install. Hardness Of Teeth Surface: Hard Teeth Surface..
45# Carbon Steel: Made Of 45# Carbon Steel, The Pinion Gear Has Better Hardness, Higher Strength And Resistance To Deformation Than Ordinary A3 Steel..
Features
- Pinion Gear: Model: 0.5 Mod; Teeth: 58T; Bore Size (Shaft Dia.): 8mm / 0.31"; Outer Dia. (Teeth Part): 30mm / 1.18"; Effective Teeth Length: 5mm / 0.2"; Step Size: 25mm x 7mm / 0.98" x 0.28" (D*H)
- 45# Carbon Steel: Made of 45# carbon steel, the pinion gear has better hardness, higher strength and resistance to deformation than ordinary A3 steel.
- Surface Treatment: Frequency hardened parts have higher wear resistance, higher strength and lower notch sensitivity. Blackened surface can effectively prevent rust and oxidation.
- Easy to Use: Be sure your RC motor shaft have the same diameter. Comes with set screws for each pinion gear, easy to install. Hardness of teeth surface: hard teeth surface.
- Tips: Release the motor to install the pinion. Make sure to lock it on the flat part of the motor shaft. Good pinion gear replacement for your equipment.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
OMGEXTRD OMG V2S 16-M3 0.5 Modulus 16 Tooth Gear Suitable for 5mm Diameter Motor Shaft
Asin: B0B3TSY253 | Model: 16M3 | PartNumber: 16M3
Material: Carbon Steel.
Compatible With Omgextrd Omg V2s Extruder.
Surface Heat Treatment Hardness Hrc>50.
M3 Nut.
Features
- Modulus 0.5 16 teeth suitable for 5mm diameter motor shaft
- M3 nut
- Material: carbon steel
- Surface heat treatment hardness HRC>50
- Compatible with OMGEXTRD OMG V2S extruder
- See more on Amazon...
Brand: OMGEXTRD | Manufacturer: NTF
See On Amazon #17
FTVOGUE 20 Tooth Pinion (6mm Round Hole Modulus 0.8) Industrial Robot Parts,Industrial Robots and Accessories
Asin: B09NDK2KWS
20 Teeth Gear Made Of High Quality Brass Material, High Temperature Resistant Ability..
Easy And Convenient For Installation And Disassemble, Reliable And Durable To Use..
6Mm / 0.236In Round Holes And 0.8 Modulus, Precise And Reasonable Size Designs..
4304‑0006‑0020 Model Brass Gear, Designed For Industrial Robot Parts Replacement..
Features
- Wonderful replacement for the old or broken gear, directly fitment and perfect matching.
- 4304 0006 0020 Model brass gear, designed for industrial robot parts replacement.
- 20 Teeth gear made of high quality brass material, high temperature resistant ability.
- 6mm / 0.236in Round holes and 0.8 modulus, precise and reasonable size designs.
- Easy and convenient for installation and disassemble, reliable and durable to use.
- See more on Amazon...
Brand: FTVOGUE | Manufacturer: FTVOGUE
See On Amazon #18
uxcell Pinion Gear Set, 45# Carbon Steel Motor Rack Spur Gear with Step Black, 0.5 Mod 28T 5mm Bore 15mm Outer Dia, M3 Set Screws Included
Asin: B0B8RCTLT5 | Model: a22051800ux0327 | PartNumber: a22051800ux0327
Surface Treatment: Frequency Hardened Parts Have Higher Wear Resistance, Higher Strength And Lower Notch Sensitivity. Blackened Surface Can Effectively Prevent Rust And Oxidation..
Tips: Release The Motor To Install The Pinion. Make Sure To Lock It On The Flat Part Of The Motor Shaft. Good Pinion Gear Replacement For Your Equipment..
Easy To Use: Be Sure Your Rc Motor Shaft Have The Same Diameter. Comes With Set Screws For Each Pinion Gear, Easy To Install. Hardness Of Teeth Surface: Hard Teeth Surface..
45# Carbon Steel: Made Of 45# Carbon Steel, The Pinion Gear Has Better Hardness, Higher Strength And Resistance To Deformation Than Ordinary A3 Steel..
Features
- Pinion Gear: Model: 0.5 Mod; Teeth: 28T; Bore Size (Shaft Dia.): 5mm / 0.2"; Outer Dia. (Teeth Part): 15mm / 0.59"; Effective Teeth Length: 5mm / 0.2"; Step Size: 12mm x 5mm / 0.47" x 0.2" (D*H)
- 45# Carbon Steel: Made of 45# carbon steel, the pinion gear has better hardness, higher strength and resistance to deformation than ordinary A3 steel.
- Surface Treatment: Frequency hardened parts have higher wear resistance, higher strength and lower notch sensitivity. Blackened surface can effectively prevent rust and oxidation.
- Easy to Use: Be sure your RC motor shaft have the same diameter. Comes with set screws for each pinion gear, easy to install. Hardness of teeth surface: hard teeth surface.
- Tips: Release the motor to install the pinion. Make sure to lock it on the flat part of the motor shaft. Good pinion gear replacement for your equipment.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
CNBTR 45 Steel 1.5 Modulus Silver 10mm Hole Diameter Tapered Bevel Gear Wheel 20T Pack of 2
Asin: B01EUY2EUU | Ean: 6930584272873
[Application] Used Widely In Conveying, Hardware, Agricultural Equipment, Printing Machinery, Automotive Applications, Mechanical Transmission, Etc..
Note: 1:1 Bevel Gear (Can Only Be Matched With 1:1, Can Not Be Matched With Gears With Other Modules And T Numbers)..
The Contact Between The Gears Is Firm, Which Ensures The Normal Operation Of The Machine And Good Bearing Capacity..
[Material] Made Of 45 Steel Material, Not Easy To Wear, Durable And Lasting Performance. This Gear Is An Excellent Industrial Replacement Accessory..
Features
- [Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 10mm hole diameter, 22mm overall length. Please confirm the correct size before purchasing.
- [Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory.
- [Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc.
- The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity.
- Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers).
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
Dimensions: 0.04 x 1.24 x 1.24 Inches
See On Amazon #20
Zipmates - Los Angeles Team Pack - Cool New Way to Customize Your Gear!
Asin: B09D8LJS8H | Ean: 0738712305457 | UPC: 738712305457
Fun, Cool, Affordable, Collectable. Great For Game Days At The Stadium!.
Officially Licensed With The Mlb Players Association. Keep Checking Back For Your Favorite Players!.
High Quality Soft Rubber With Bold And Bright Graphics That Fans Become Attached To..
Zipmates Patented Rubber Sleeve Easily Slides On Most Zipper Pulls, Drawstrings And Shoelaces. Plus Any Other Fun Things You Can Imagine! Zipmates ‘For Shades’ Easily Slide On Most Sunglass/Eyeglass Arms..
Features
- Set of 9 Zipmates or Zipmates For Shades . Includes Kershaw, Freeman, Betts, Urias, Taylor, Muncy, Smith, Buehler and Lux.
- Zipmates patented rubber sleeve easily slides on most zipper pulls, drawstrings and shoelaces. Plus any other fun things you can imagine! Zipmates For Shades easily slide on most Sunglass/Eyeglass arms.
- Fun, Cool, Affordable, Collectable. Great for game days at the Stadium!
- High Quality soft rubber with bold and bright graphics that fans become attached to.
- Officially licensed with the MLB Players Association. Keep checking back for your favorite players!
- See more on Amazon...
Brand: Zipmates | Manufacturer: Zipmates
See On Amazon #21
OSSIL Brass Gear CNC Machine Tool 1Mod Gear Rack Steel 10 * 10 * 500mm + 1unite 1Mod 17Teeth 15Teeth Pinion 45 Steel Gear Metal Gear Mechanical Drive DIY (Color : 15 Teeth, Size : 8mm)
Asin: B0CPX7LGML | Model: OSSIL | PartNumber: OSSIL | Ean: 8155438627366
3. Good Gloss, Easy Installation, High Performance In One..
2. The Edge Is Handled Carefully, The Surface Is Smooth, And The Hard Treatment Is Added To Improve The Work Efficiency..
Features
- 1. Easy to clean and maintain, easy to operate, smooth surface can withstand slight wear.
- 2. The edge is handled carefully, the surface is smooth, and the hard treatment is added to improve the work efficiency.
- 3. Good gloss, easy installation, high performance in one.
- See more on Amazon...
Brand: OSSIL | Manufacturer: OSSIL
Weight: 1.10 pounds
See On Amazon #22
GRQKJ Industrial Machinery Gear,Pinion Industrial Drive 1.5M 50T 1.5 Mod Gear Rack 50 Teeth Tooth Quenching Spur Gear Pinion Bore Around 10mm SpurGear Precision Steel CNC Pinion
Asin: B0D2WYN4DD | Model: GRQKJ | PartNumber: GRQKJ | Ean: 8095465923140
3. Can Be Widely Used In Hardware, Mold, Mechanical Transmission And Other Industries, Many Fields Of Application, Can Meet Most Of Your Needs..
2. Bevel Gear Is A Must Have Accessory In Your Industrial Supplies. Different Gears And Revolutions Have Different Load-Bearing Effects..
Features
- 1. Made of steel, strong and wear-resistant, can be used for a long time, is an excellent industrial alternative parts.
- 2. Bevel gear is a must have accessory in your industrial supplies. Different gears and revolutions have different load-bearing effects.
- 3. Can be widely used in hardware, mold, mechanical transmission and other industries, many fields of application, can meet most of your needs.
- See more on Amazon...
Brand: GRQKJ | Manufacturer: GRQKJ
Weight: 4.41 pounds
See On Amazon #23
OSSIL Brass Gear CNC Machine Tool 5pcs 0.5M 16T 17T 18T 19T Copper Gear 2.98MM 1.48//2.98/3.16/5.98MM Hole Model Gear 16/17/18/19/20 Teeth Parts (Size : 16T-9mm-1.98MM-T5)
Asin: B0D2WSFRSH | Model: OSSIL | PartNumber: OSSIL | Ean: 8095465592582
3. Good Gloss, Easy Installation, High Performance In One..
2. The Edge Is Handled Carefully, The Surface Is Smooth, And The Hard Treatment Is Added To Improve The Work Efficiency..
Features
- 1. Easy to clean and maintain, easy to operate, smooth surface can withstand slight wear.
- 2. The edge is handled carefully, the surface is smooth, and the hard treatment is added to improve the work efficiency.
- 3. Good gloss, easy installation, high performance in one.
- See more on Amazon...
Brand: OSSIL | Manufacturer: OSSIL
Weight: 0.11 pounds
See On Amazon #24
OSSIL Brass Gear CNC Machine Tool 1pcs 25-40 Teeth 04C Chain Gear Bore 8-15mm Industrial Sprocket Wheel Chain Drive Sprocket Pitch 6.35mm (Size : 10mm, Color : 30 Teeth)
Asin: B0D2SGWCHT | Model: OSSIL | PartNumber: OSSIL | Ean: 8095465483576
3. Good Gloss, Easy Installation, High Performance In One..
2. The Edge Is Handled Carefully, The Surface Is Smooth, And The Hard Treatment Is Added To Improve The Work Efficiency..
Features
- 1. Easy to clean and maintain, easy to operate, smooth surface can withstand slight wear.
- 2. The edge is handled carefully, the surface is smooth, and the hard treatment is added to improve the work efficiency.
- 3. Good gloss, easy installation, high performance in one.
- See more on Amazon...
Brand: OSSIL | Manufacturer: OSSIL
Weight: 0.11 pounds
See On Amazon #25
OSSIL Brass Gear CNC Machine Tool 1pcs 0.6 Modulus 8T 9T 10T 12T Teeth Copper Metal Gear 1.98mm Aperture Motor Spindle Gearwheel Fit 2mm 3.175mm Shaft (Size : 10T 2.28mm Hole)
Asin: B0D2WS5X8M | Model: OSSIL | PartNumber: OSSIL | Ean: 8095465595514
3. Good Gloss, Easy Installation, High Performance In One..
2. The Edge Is Handled Carefully, The Surface Is Smooth, And The Hard Treatment Is Added To Improve The Work Efficiency..
Features
- 1. Easy to clean and maintain, easy to operate, smooth surface can withstand slight wear.
- 2. The edge is handled carefully, the surface is smooth, and the hard treatment is added to improve the work efficiency.
- 3. Good gloss, easy installation, high performance in one.
- See more on Amazon...
Brand: OSSIL | Manufacturer: OSSIL
Weight: 0.11 pounds
See On Amazon #26
OSSIL Brass Gear CNC Machine Tool 1pcs 06C Chain Gear 3 Points 35B Sprocket 10-25 Tooth Steel Process Hole 10mm Industrial Transmission Sprocket Wheel (Size : Process Hole 10mm, Color : 10 Teeth)
Asin: B0D2SJZTVF | Model: OSSIL | PartNumber: OSSIL | Ean: 8095465484672
3. Good Gloss, Easy Installation, High Performance In One..
2. The Edge Is Handled Carefully, The Surface Is Smooth, And The Hard Treatment Is Added To Improve The Work Efficiency..
Features
- 1. Easy to clean and maintain, easy to operate, smooth surface can withstand slight wear.
- 2. The edge is handled carefully, the surface is smooth, and the hard treatment is added to improve the work efficiency.
- 3. Good gloss, easy installation, high performance in one.
- See more on Amazon...
Brand: OSSIL | Manufacturer: OSSIL
Weight: 0.11 Pounds
See On Amazon #27
Brass Gear CNC Machine Tool 1pcs Pinion Gears 1.5 Module Spur Gear 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Teeth Carbon Steel Metal Transmission Gear (Size : 26T OD42mm)
Asin: B0D2WR1SDL | Model: OSSIL | PartNumber: OSSIL | Ean: 8095465596559
3. Good Gloss, Easy Installation, High Performance In One..
2. The Edge Is Handled Carefully, The Surface Is Smooth, And The Hard Treatment Is Added To Improve The Work Efficiency..
Features
- 1. Easy to clean and maintain, easy to operate, smooth surface can withstand slight wear.
- 2. The edge is handled carefully, the surface is smooth, and the hard treatment is added to improve the work efficiency.
- 3. Good gloss, easy installation, high performance in one.
- See more on Amazon...
Brand: OSSIL | Manufacturer: OSSIL
Weight: 0.11 pounds
See On Amazon #28
OSSIL Brass Gear CNC Machine Tool 1pcs Bevel Gear 3M 20Teeth with Inner Hole 14/15/16/17/18/19/20/22/24/25/28mm Commutation Steel Gears with Screw (Size : 28mm Keyway 8mm, Color : 3M 20 Teeth)
Asin: B0D2SJYKVM | Model: OSSIL | PartNumber: OSSIL | Ean: 8095465485020
3. Good Gloss, Easy Installation, High Performance In One..
2. The Edge Is Handled Carefully, The Surface Is Smooth, And The Hard Treatment Is Added To Improve The Work Efficiency..
Features
- 1. Easy to clean and maintain, easy to operate, smooth surface can withstand slight wear.
- 2. The edge is handled carefully, the surface is smooth, and the hard treatment is added to improve the work efficiency.
- 3. Good gloss, easy installation, high performance in one.
- See more on Amazon...
Brand: OSSIL | Manufacturer: OSSIL
Weight: 0.11 pounds
See On Amazon #29
Zipmates - Jose Altuve - Houston Baseball - Cool New Way to Customize Your Gear!
Asin: B08CCS88LR | Ean: 0738712304573 | UPC: 738712304573
Fun, Cool, Affordable, Collectable. Great For Game Days At The Stadium!.
Officially Licensed With The Mlb Players Association. Keep Checking Back For Your Favorite Players!.
High Quality Soft Rubber With Bold And Bright Graphics That Fans Become Attached To..
Zipmates Patented Rubber Sleeve Easily Slides On Most Zipper Pulls, Drawstrings And Shoelaces. Plus Any Other Fun Things You Can Imagine! Zipmates ‘For Shades’ Easily Slide On Most Sunglass/Eyeglass Arms..
Features
- Set of 2 Zipmates or Zipmates 'For Shades'. Customize all kinds of gear with your Jos Altuve Houston Zipmates!
- Zipmates patented rubber sleeve easily slides on most zipper pulls, drawstrings and shoelaces. Plus any other fun things you can imagine! Zipmates For Shades easily slide on most Sunglass/Eyeglass arms.
- Fun, Cool, Affordable, Collectable. Great for game days at the Stadium!
- High Quality soft rubber with bold and bright graphics that fans become attached to.
- Officially licensed with the MLB Players Association. Keep checking back for your favorite players!
- See more on Amazon...
Brand: Zipmates | Manufacturer: Zipmates
See On Amazon #30
Zipmates - Yu Darvish - San Diego Baseball - Cool New Way to Customize Your Gear!
Asin: B097WR3XXK | Ean: 0738712305662 | UPC: 738712305662
Fun, Cool, Affordable, Collectable. Great For Game Days At The Stadium!.
Officially Licensed With The Mlb Players Association. Keep Checking Back For Your Favorite Players!.
High Quality Soft Rubber With Bold And Bright Graphics That Fans Become Attached To..
Zipmates Patented Rubber Sleeve Easily Slides On Most Zipper Pulls, Drawstrings And Shoelaces. Plus Any Other Fun Things You Can Imagine! Zipmates ‘For Shades’ Easily Slide On Most Sunglass/Eyeglass Arms..
Features
- Set of 2 Zipmates or Zipmates 'For Shades'. Customize all kinds of gear with your Yu Darvish San Diego Zipmates!
- Zipmates patented rubber sleeve easily slides on most zipper pulls, drawstrings and shoelaces. Plus any other fun things you can imagine! Zipmates For Shades easily slide on most Sunglass/Eyeglass arms.
- Fun, Cool, Affordable, Collectable. Great for game days at the Stadium!
- High Quality soft rubber with bold and bright graphics that fans become attached to.
- Officially licensed with the MLB Players Association. Keep checking back for your favorite players!
- See more on Amazon...
Brand: Zipmates | Manufacturer: Zipmates
See On Amazon
Looking For Something Else?
Search