Best thread forming & cutting screws - Buying Guide
Last Updated: 05/04/2024
Share on
Bestselling thread forming & cutting screws on Amazon
- Newport Fasteners Floorboard Thread Cutting Screws 1/4-20 x 2 1/2 (Quantity: 100 pcs) Type F Star Dr...
- Small Parts 3716FSWS Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Slott...
- Small Parts 37203W Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Type 23, 3/8"-16...
- Hard-to-Find Fastener 014973311056 Thread Cutting Floor Board Screws, 1/4-20 x 1-1/2, Piece-54 , black
- Hard-to-Find Fastener 014973311087 Thread Cutting Floor Board Screws, 1/4-20 x 2-1/4, Piece-40, black
- U-Turn - 1/4-20 x 2 1/2 inch Flat Head Floorboard Thread Cutting Screws, Type F, T30 Torx, Black Pho...
- Hard-to-Find Fastener 014973311063 Thread Cutting Floor Board Screws, 1/4-20 x 2, Piece-45
- Small Parts 3116FSW Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, ...
- Small Parts-0202 Steel Thread Cutting Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type F, #...
- Small Parts 0610LPP Steel Thread Rolling Screw for Plastic, Zinc Plated, Pan Head, Phillips Drive, #...
#1
Newport Fasteners Floorboard Thread Cutting Screws 1/4-20 x 2 1/2 (Quantity: 100 pcs) Type F Star Drive Black Phosh T-30 Drive Alloy Steel
Asin: B07D3NJYNW | Model: 688124-100 | PartNumber: 688124-100 | Ean: 8945136836661
Self Tapping Thread Cutting Screws - Measure Length From The Top Of The Head To The Tip.
The Head Design Of Floorboard Screws Provide A Flush Surface In Countersunk Holes. For This Reason, They Are Perfect In Floorboard Fastening Applications. The Star Drive Provides Better Grip And Less Slippage Compared To Other Drive Types, Allowing For Easier And More Efficient Installation..
Recommended Plate Thickness - .247 Inches- .253 Inches | Recommended Hole Size - .228 Inches (#1 Drill Bit Size).
Material - Hardened Steel (Rc 45 Minimum Case Hardness) | Black Phosphate & Oil Coating - Provides Corrosion Resistance.
Features
- SELF TAPPING TRAILER DECK SCREWS - Designed specifically for attaching wood floors into truck trailers, but they can be used in a number of different applications such as those involving fastening to heavy gauge sheet metal, aluminum, castings, cast iron, brass, and plastic.
- MATERIAL - Hardened Steel (RC 45 Minimum Case Hardness) | BLACK PHOSPHATE & OIL COATING - Provides corrosion Resistance
- Self Tapping Thread Cutting Screws - Measure length from the top of the head to the tip
- RECOMMENDED PLATE THICKNESS - .247 inches- .253 inches | RECOMMENDED HOLE SIZE - .228 inches (#1 Drill Bit Size)
- The head design of Floorboard Screws provide a flush surface in countersunk holes. For this reason, they are perfect in floorboard fastening applications. The star drive provides better grip and less slippage compared to other drive types, allowing for easier and more efficient installation.
- See more on Amazon...
Brand: Newport Fasteners | Manufacturer: Newport Fasteners
Dimensions: 3.50 x 5.75 x 4.50 inches | Weight: 2.86 pounds
See On Amazon #2
Small Parts 3716FSWS Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Slotted Drive, Type F, 3/8"-16 Thread Size, 1" Length (Pack of 10)
Asin: B00GX15RRQ | Model: 3716FSWS | PartNumber: 3716FSWS
Zinc Plating Resists Corrosion And Has A Reflective Appearance.
Slotted Drive Has A Linear Slot For Use With A Flat-Blade Driver.
Hex Washer Head Has A Serrated Flange For Additional Grip On The Mating Surface That Resists Loosening.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Features
- Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic
- Steel is often used in applications where strength is the primary consideration
- Zinc plating resists corrosion and has a reflective appearance
- Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening
- Slotted drive has a linear slot for use with a flat-blade driver
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 1.00 x 0.00 inches
See On Amazon #3
Small Parts 37203W Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Type 23, 3/8"-16 Thread Size, 1-1/4" Length (Pack of 10)
Asin: B00GWYPI3W | Model: 37203W | PartNumber: 37203W
Zinc Plating Resists Corrosion And Has A Reflective Appearance.
Hex Washer Head Has A Flange For Additional Grip With The Mating Surface And Has Six Flat Sides That A Wrench Can Grip To Turn From The Side.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Features
- Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install
- Steel is often used in applications where strength is the primary consideration
- Zinc plating resists corrosion and has a reflective appearance
- Hex washer head has a flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side
- See more on Amazon...
First Available: 11/25/2017
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 1.25 x 0.00 Inches | Weight: 0.00 Pounds
See On Amazon #4
Hard-to-Find Fastener 014973311056 Thread Cutting Floor Board Screws, 1/4-20 x 1-1/2, Piece-54 , black
Asin: B00L1LA58E | Model: 014973311056 | PartNumber: 014973311056 | Ean: 0738287512694, 0014973311056 | UPC: 738287512694, 014973311056
Material: Steel.
Head Style: Flat (T-30 Star Bit).
Finish: Black.
Length: 1-1/2 Inch.
Features
- Diameter: 1/4"
- Length: 1-1/2 inch
- Material: Steel
- Finish: Black
- Head Style: Flat (T-30 Star Bit)
- See more on Amazon...
Brand: Hard-to-Find Fastener | Manufacturer: Hard-to-Find Fastener
Dimensions: 2.00 x 4.50 x 3.50 Inches | Weight: 0.90 Pounds
See On Amazon #5
Hard-to-Find Fastener 014973311087 Thread Cutting Floor Board Screws, 1/4-20 x 2-1/4, Piece-40, black
Asin: B00L1LA7UK | Model: 014973311087 | PartNumber: 014973311087 | Ean: 0014973311087, 0738287512717 | UPC: 738287512717, 014973311087
Material: Steel.
Head Style: Flat (T-30 Star Bit).
Finish: Black.
Length: 2-1/4 Inches.
Features
- Diameter: 1/4"
- Length: 2-1/4 inches
- Material: Steel
- Finish: Black
- Head Style: Flat (T-30 Star Bit)
- See more on Amazon...
Brand: Hard-to-Find Fastener | Manufacturer: Hard-to-Find Fastener
Dimensions: 2.00 x 4.50 x 3.50 Inches | Weight: 0.86 Pounds
See On Amazon #6
U-Turn - 1/4-20 x 2 1/2 inch Flat Head Floorboard Thread Cutting Screws, Type F, T30 Torx, Black Phosphate (100 Pack)
Asin: B07TV8ZTZL | Model: HAOCHUAN | PartNumber: HAOCHUAN | Ean: 0787303278519 | UPC: 787303278519
For Consistent Performance, The Material In Which The Threads Are Cut Should Have A Lower Hardness Of At Least 10-20 Rockwell Points.
Recommended Plate Thickness - .247 Inches- .253 Inches | Recommended Hole Size - .228 Inches (#1 Drill Bit Size).
Drive - T-30 Torx Drive (6-Lobe).
Material - Hardened Steel (Rc 45 Minimum Case Hardness) | Black Phosphate & Oil Coating - Provides Corrosion Resistance.
Features
- SELF TAPPING TRAILER DECK SCREWS - Designed specifically for attaching wood floors into truck trailers, but they can be used in a number of different applications such as those involving fastening to heavy gauge sheet metal, aluminum, castings, cast iron, brass, and plastic.
- MATERIAL - Hardened Steel (RC 45 Minimum Case Hardness) | BLACK PHOSPHATE & OIL COATING - Provides corrosion Resistance
- For consistent performance, the material in which the threads are cut should have a lower hardness of at least 10-20 Rockwell points
- DRIVE - T-30 TORX DRIVE (6-LOBE)
- RECOMMENDED PLATE THICKNESS - .247 inches- .253 inches | RECOMMENDED HOLE SIZE - .228 inches (#1 Drill Bit Size)
- See more on Amazon...
Brand: HAOCHUAN | Manufacturer: HAOCHUAN
See On Amazon #7
Hard-to-Find Fastener 014973311063 Thread Cutting Floor Board Screws, 1/4-20 x 2, Piece-45
Asin: B00L1LA63S | Model: 014973311063 | PartNumber: 014973311063 | Ean: 0014973311063, 0738287512700 | UPC: 738287512700, 014973311063
Material: Black.
Thread Type: 20 (Coarse).
Head Style: Flat (T-30 Star Bit).
Length: 2 Inches.
Features
- Diameter: 1/4"
- Length: 2 inches
- Material: Black
- Head Style: Flat (T-30 Star Bit)
- Thread Type: 20 (Coarse)
- See more on Amazon...
Brand: Hard-to-Find Fastener | Manufacturer: Hard-to-Find Fastener
Dimensions: 2.00 x 4.50 x 3.50 Inches
See On Amazon #8
Small Parts 3116FSW Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, 5/16"-18 Thread Size, 1" Length (Pack of 25)
Asin: B00GX10CBC | Model: 3116FSW | PartNumber: 3116FSW
Zinc Plating Resists Corrosion And Has A Reflective Appearance.
Slotted Drive Has A Linear Slot For Use With A Flat-Blade Driver.
Hex Washer Head Has A Flange For Additional Grip With The Mating Surface.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Features
- Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic
- Steel is often used in applications where strength is the primary consideration
- Zinc plating resists corrosion and has a reflective appearance
- Hex washer head has a flange for additional grip with the mating surface
- Slotted drive has a linear slot for use with a flat-blade driver
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 1.00 x 0.00 Inches
See On Amazon #9
Small Parts-0202 Steel Thread Cutting Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type F, #2-56 Thread Size, 1/8" Length (Pack of 100)
Asin: B00GX0DPGW | Model: 0202FPPB | PartNumber: 0202FPPB
Black Oxide Finish Offers Mild Corrosion Resistance And Lubricity.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Features
- Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic
- Steel is often used in applications where strength is the primary consideration
- Black oxide finish offers mild corrosion resistance and lubricity
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.13 x 0.00 Inches | Weight: 0.00 Pounds
See On Amazon #10
Small Parts 0610LPP Steel Thread Rolling Screw for Plastic, Zinc Plated, Pan Head, Phillips Drive, #6-19 Thread Size, 5/8" Length (Pack of 100)
Asin: B00GDXXMUI | Model: 0610LPP | PartNumber: 0610LPP
Zinc Plating Resists Corrosion And Has A Reflective Appearance.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Features
- Thread rolling screw recommended for use in plastic
- Steel is often used in applications where strength is the primary consideration
- Zinc plating resists corrosion and has a reflective appearance
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.63 x 0.00 Inches | Weight: 0.00 Pounds
See On Amazon #11
1/4"-20 Flat Head T30 Torx Star Drive Thread Cutting Trailer Floorboard Screws (100, 1/4"-20 x 2-1/2")
Asin: B085S5LM59 | Ean: 0631772706359 | UPC: 631772706359
Blunt Tapered Point With Multi-Cutting Edges And Chip Cavities.
T30 Drive.
Type F Thread Cutting Screws.
Star Drive To Prevent Stripping And Ease Installation.
Features
- Black Phosphate and Oil Finish for Corrosion Resistance
- Star Drive to prevent stripping and ease installation
- Blunt tapered point with multi-cutting edges and chip cavities
- Type F Thread Cutting Screws
- T30 Drive
- See more on Amazon...
Brand: RAW PRODUCTS CORP | Manufacturer: RAW Products Corp
See On Amazon #12
5/16"-18 Flat Head T40 Torx Star Drive Thread Cutting Trailer Floorboard Screws (25, 5/16"-18 x 1-3/4")
Asin: B085S5PYG9 | Ean: 0631772706854 | UPC: 631772706854
Blunt Tapered Point With Multi-Cutting Edges And Chip Cavities.
T40 Drive.
Type F Thread Cutting Screws.
Star Drive To Prevent Stripping And Ease Installation.
Features
- Black Phosphate and Oil Finish for Corrosion Resistance
- Star Drive to prevent stripping and ease installation
- Blunt tapered point with multi-cutting edges and chip cavities
- Type F Thread Cutting Screws
- T40 Drive
- See more on Amazon...
Brand: RAW PRODUCTS CORP | Manufacturer: RAW Products Corp
See On Amazon #13
Small Parts 0820LPP188 18-8 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #8-16 Thread Size, 1-1/4" Length (Pack of 25)
Asin: B00GDY8SOW | Model: 0820LPP188 | PartNumber: 0820LPP188
Passivated Finish Enhances The Natural Corrosion Resistance Of Stainless Steel.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
18-8 Stainless Steel Provides Good Corrosion Resistance And Strength.
Features
- Thread rolling screw recommended for use in plastic
- 18-8 stainless steel provides good corrosion resistance and strength
- Passivated finish enhances the natural corrosion resistance of stainless steel
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 1.25 x 0.00 Inches
Amazon Price: $7.47 ($0.30 / Count) | as of 05/04/2024
(5:48am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #14
Small Parts 0403RPUB Steel Thread Rolling Screw for Metal, Black Oxide Finish, 82 Degree Undercut Flat Head, Phillips Drive, #4-40 Thread Size, 3/16" Length (Pack of 100)
Asin: B00GE0MLJI | Model: 0403RPUB | PartNumber: 0403RPUB
Black Oxide Finish Offers Mild Corrosion Resistance And Lubricity.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Flat Undercut Head Has A Flat Top With An 82-Degree Cone-Shaped Bearing Surface And Is Undercut For Use In Shallow Countersunk Holes.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Features
- Thread rolling screw recommended for use in metal
- Steel is often used in applications where strength is the primary consideration
- Black oxide finish offers mild corrosion resistance and lubricity
- Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.19 x 0.11 inches | Weight: 0.02 pounds
See On Amazon #15
ACE PDO Thread Lift - 360R Bidirection Cog/L-Type Blunt (20pcs) - 16 Sizes (19G38/95)
Asin: B083CSTBLG | Ean: 8965441125236
Disposable Device Do Not Resterilize Or Reuse.
Effection : Skin Rejuvenation Smoothing Of Wrinkles Narrowing Of The Pores Increase In Volume Of The Area Treated Lifting Of The Skin.
Non-Toxic / Non-Pyrogenic / Heavy Metal Free / Sterilized By E.O. Gas.
Features
- PDO Thread Lift - 360R Bidirection Cog Type / L-Type Blunt (20pcs)
- Non-toxic / Non-pyrogenic / Heavy metal free / Sterilized by E.O. GAS
- Disposable device do not resterilize or reuse
- Effection : Skin rejuvenation Smoothing of wrinkles Narrowing of the pores Increase in volume of the area treated Lifting of the skin
- See more on Amazon...
Brand: AEE Technology | Manufacturer: AE
See On Amazon #16
(250) Torx T30 Trailer Deck Floorboard Screw 1/4-20 x 2 Flat Thread Cutting Floor
Asin: B07D23V9ZV
Drive Type: 6-Lobe / Torx.
Finish: Plain.
Head Type: Flat.
Length: 2.
Brand: Lexar Industrial | Manufacturer: Lexar Industrial
Weight: 5.50 Pounds
See On Amazon #17
Lexar Industrial (225) Torx T30 Trailer Deck Floorboard Screw 1/4-20 x 2-1/4 Flat Thread Cutting Floor
Asin: B07D24JG3N
Drive Type: 6-Lobe / Torx.
Finish: Plain.
Head Type: Flat.
Length: 2-1/4.
Brand: Lexar Industrial | Manufacturer: Lexar Industrial
Weight: 5.44 Pounds
See On Amazon #18
Small Parts 0608LTFB Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #6-19 Thread Size, 1/2" Length (Pack of 100)
Asin: B00GDYNYPA | Model: 0608LTFB | PartNumber: 0608LTFB
Black Oxide Finish Offers Mild Corrosion Resistance And Lubricity.
Star Drive Has A Six-Pointed Indentation That Provides A Large Contact Area For The Driver, Resisting Slippage Better Than A Phillips Or Slotted Drive.
Flat Head Has An 82-Degree Cone-Shaped Bearing Surface For Use In Countersunk Holes And A Flat Top That Fits Flush With The Mated Surface.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Features
- Thread rolling screw recommended for use in plastic
- Steel is often used in applications where strength is the primary consideration
- Black oxide finish offers mild corrosion resistance and lubricity
- Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface
- Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.50 x 0.00 Inches
See On Amazon #19
Small Parts 0310LPP Steel Thread Rolling Screw for Plastic, Zinc Plated, Pan Head, Phillips Drive, #3-24 Thread Size, 5/8" Length (Pack of 50)
Asin: B00GDXV3QS | Model: 0310LPP | PartNumber: 0310LPP
Zinc Plating Resists Corrosion And Has A Reflective Appearance.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Features
- Thread rolling screw recommended for use in plastic
- Steel is often used in applications where strength is the primary consideration
- Zinc plating resists corrosion and has a reflective appearance
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.63 x 0.00 Inches | Weight: 0.00 Pounds
See On Amazon #20
Small Parts 0612LTP Steel Thread Rolling Screw for Plastic, Zinc Plated, Pan Head, Star Drive, #6-19 Thread Size, 3/4" Length (Pack of 100)
Asin: B00GDYRY06 | Model: 0612LTP | PartNumber: 0612LTP
Zinc Plating Resists Corrosion And Has A Reflective Appearance.
Star Drive Has A Six-Pointed Indentation That Provides A Large Contact Area For The Driver, Resisting Slippage Better Than A Phillips Or Slotted Drive.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Features
- Thread rolling screw recommended for use in plastic
- Steel is often used in applications where strength is the primary consideration
- Zinc plating resists corrosion and has a reflective appearance
- Pan head has a flat top and short vertical sides with a rounded top edge
- Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.75 x 0.00 Inches
See On Amazon
Looking For Something Else?
Search