AURSINC NanoVNA Vector Network Analyzer, 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Ham Radio with 2.8'' Touchscreen HW V3.5, Measuring S Parameters, Voltage Standing Wave Ratio, Phase Delay Smith Chart
Asin: B07T6LXNTV | Model: NanoVNA 2.8'' | PartNumber: NanoVNA 2.8'' | Ean: 0753318592193 | UPC: 753318592193
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Measurement Frequency] Measurement Frequency Of Nanovna Is 10Khz - 1.5Ghz (50Khz -900Mhz, Enable Extended Firmware). Measurement Range: 70Db (50Khz-300Mhz), 60Db (300M-900Mhz), 40Db (900Mhz-1.5Ghz) Enable Extended Firmware. The Improved Frequency Algorithm Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz.
[Package List] 1X Nanovna Host (With 650Ma-H Battery, Without Case, Came In A Plastic Case), 1X Usb Type-C Data Cable, 2X 30Cm Sma Male To Male Rg174 Rf Cable, 1X Sma Simple Calibration Kit, 1X Sma Female To Female Connector.
[Accurate Measurement] The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring. The Ch0 Output Level Is Increased To 0Dbm When Using The Fundamental Wave, Resulting In More Accurate Reflection Measurement.
[More Functionality] Measuring Amplifier Gain, Bandwidth, Phase Frequency Characteristics, Transmission Line Loss, Characteristic Impedance, Coupler Coupling, Isolation, Filter, Diplexer Passband And So On. You Can Being Able To See A Graph Of The Swr Of A Given Antenna Over A Sweep That You Get To Set Start And Stop. Excellent Performance For Radio Amateurs.
[Pc Control] Designed A Practical And Simple Control Application On Pc, You Can Download Touchstone(Snp) Files For Radio Design And Simulation Software. There's Nanovnasharp Software Available For Pc And Linux (Github.Com/Mihtjel/Nanovna-Saver/Releases), Supports Control And Real-Time Display. You Can Connect The Nanovna To Your Pc For A Large Screen Display With A Usb-C Cable.
[Licensing And Firmware] Developed By Hugen, More Info Pls View "Nanovna-Users@Groups.Io". The Firmware Version Of Nano Vna Is Hw V3.5. It Is Upgradeable As New Firmware Is Developed (Github.Com/Ttrftech/Nanovna). The Default Firmware Of Aursinc Nanovna Main Function Is Used For Antenna Performance Measurement.
Features
- [Designed for DIY] This nanovna is a DIY product (no enclosure) that provides perfect vector network measurement capabilities in a credit card-sized design, featuring a 2.8-inch TFT touch screen (320 x240) and a 650mAh battery for up to 2 hours. Added battery management circuit to reduce power noise, USB power interference, charging current, and protects the battery
- [Licensing and Firmware] Developed by Hugen, more info pls view nanovna-users@groups.io. The firmware version of nano vna is HW V3.5. It is upgradeable as new firmware is developed (github.com/ttrftech/NanoVNA). The default firmware of AURSINC nanovna main function is used for antenna performance measurement
- [Measurement Frequency] Measurement frequency of nanovna is 10KHz - 1.5GHz (50KHz -900MHz, enable extended firmware). Measurement range: 70dB (50kHz-300MHz), 60dB (300M-900MHz), 40dB (900MHz-1.5GHz) enable extended firmware. The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz
- [PC Control] Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software. There's NANOVNASHARP software available for PC and Linux (github.com/mihtjel/nanovna-saver/releases), supports control and real-time display. You can connect the nanovna to your PC for a large screen display with a USB-C cable
- [Accurate Measurement] The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. The CH0 output level is increased to 0dBm when using the fundamental wave, resulting in more accurate reflection measurement
- [More Functionality] Measuring amplifier gain, bandwidth, phase frequency characteristics, transmission line loss, characteristic impedance, coupler coupling, isolation, filter, diplexer passband and so on. You can being able to see a graph of the SWR of a given antenna over a sweep that you get to set start and stop. Excellent performance for radio amateurs
- [Package list] 1x NanoVNA host (with 650mA-h battery, without case, came in a plastic case), 1x USB Type-C data cable, 2x 30cm SMA male to male RG174 RF cable, 1x SMA simple calibration kit, 1x SMA female to female connector
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Dimensions: 0.47 x 2.13 x 3.35 inches | Weight: 0.22 pounds
See On Amazon Similar To AURSINC NanoVNA Vector Network Analyzer
#1
[Upgraded] AURSINC NanoVNA-H Vector Network Analyzer 10KHz -1.5GHz Latest HW Version 3.6 | HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart
Asin: B07Z5VY7B6 | Model: NanoVNA-H Vector Network Analyzer | PartNumber: NanoVNA-H Vector Network Analyzer
[Multiple Functions] The Default Firmware Main Function Is Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring. The Ch0 Output Level Is Increased To 0Dbm When Using The Fundamental Wave, Resulting In More Accurate Reflection Measurement.
[Strong And Secure Power Supply] This Vna Is Battery Powered Or Usb Powered. Built In 650Mah Battery, Could Work For 2 Hours Continuously. For Longer Measurement Time, Kindly Connect An External Power Source. The Product Interface Displays Battery Usage, Providing A Clear Understanding Of The Power Status.
[Support Android Phone & Pc Softsare Control] Designed A Practical And Simple Control Application On Pc, You Can Download Touchstone(Snp) Files For Radio Design And Simulation Software. There Is A Pc Interface That Adds Functionality And Lets You Work Interactively On A Bigger Screen. Supports Time Domain Analysis Function (Tdr). Compatible With Most Android Mobile Phones, Convenient For Connecting To Mobile Phones. Support Windows Computer Control.
[Improved Frequency Algorithm] The Improved Frequency Algorithm Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics.
Features
- [UPGRADED NanoVNA-H] New HW Version V3.6. It is upgradeable as new firmware is developed. With MicroSD card port now can have the measurement data or the screenshots saved in the it at anytime. Added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone with Type C-Type C cable (original PCB needs OTG cable), see a clear HD image on your phone. Added a ABS case, which is protective and dust-proof. Disply: 2.8 inch TFT (320 x240)
- [IMPROVED FREQUENCY ALGORITHM] The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
- [MULTIPLE FUNCTIONS] The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. The CH0 output level is increased to 0dBm when using the fundamental wave, resulting in more accurate reflection measurement
- [SUPPORT ANDROID PHONE & PC SOFTSARE CONTROL] Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software. There is a PC interface that adds functionality and lets you work interactively on a bigger screen. Supports time domain analysis function (TDR). Compatible with most Android mobile phones, convenient for connecting to mobile phones. Support Windows Computer Control
- [STRONG AND SECURE POWER SUPPLY] This VNA is battery powered or USB powered. Built in 650mAh battery, could work for 2 hours continuously. For longer measurement time, kindly connect an external power source. The product interface displays battery usage, providing a clear understanding of the power status
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
See On Amazon #2
AURSINC NanoVNA-H4 Vector Network Analyzer, Lastest V4.3 10KHz-1.5GHz HF VHF UHF 4" Touch Screen Nanovna Antenna Analyzer Ham Radio, Measuring S Parameters, SWR, Phase, Delay, Smith Chart
Asin: B083PQ4RXZ
✔️【Antenna Performance Measurement】The Default Firmware Main Function For Vector Network Analyzer Is Used For Antenna Performance Measurement. It Has Good Rf Performance For S-Parameter Measurements As Previous Models. Note: The Nanovna Is Only Compatible With The Low-Speed And Supports Spi Mode Sd Cards For Now. It Is Very Efficient Vector Testing For Ham Radio Operator, Research Electrical Engineer And Antenna Builders.
✔️【What Are Included】1X Nanovna-H4 Host (With 1950Mah Battery), 4Pcs Sma Male Calibration Kit (Open/Short/Load/Sma Female To Female Connector), 2X 16Cm/6.3Inch Sma Male To Male Rg174 Rf Cable, 1X Usb Type-C Data Cable, 1X Type-C To Type-C Cable, 1X Lanyard With Stylus, 1X Stylus Pen, 1X User Manual.
✔️【Pc & Android Control】Using Pc Software Nanovnasaver, Nanovna-H4 Antenna Analyzer Can Connect To A Nanovna And Extracts The Data For Display On A Computer, And For Saving To Touchstone Files. We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring.
✔️【Improved Frequency Algorithm】The Improved Frequency Algorithm Of Nano Vna H4 Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic. The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics. Used It To Check Out New Cable Or Antenna Installations And To Routinely Adjust The Rf Tuner For Optimum.
Features
- UPGRADED NANOVNA-H4 V4.3 AURSINC nanovna h4 is a Hugen Origin that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 4inch LCD display, with 1950mAh battery powered or USB powered. With latest HW 4.3 version, Nanovna-h4 antenna analyzer is added a brand new panel plus added a new SD port for data storage(support up to 32GB memory card, not included in the package)
- IMPROVED FREQUENCY ALGORITHM The improved frequency algorithm of nano vna h4 can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic. The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics. Used it to check out new cable or antenna installations and to routinely adjust the RF tuner for optimum
- ANTENNA PERFORMANCE MEASUREMENT The default firmware main function for vector network analyzer is used for antenna performance measurement. It has good RF performance for S-parameter measurements as previous models. NOTE: the Nanovna is only compatible with the low-speed and supports SPI mode SD cards for now. It is very efficient vector testing for ham radio operator, research electrical engineer and antenna builders
- PC & ANDROID CONTROL Using PC software NanoVNASaver, NanoVNA-H4 antenna analyzer can connect to a NanoVNA and extracts the data for display on a computer, and for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring
- WHAT ARE INCLUDED 1x NanoVNA-H4 host (with 1950mAh battery), 4pcs SMA male calibration kit (open/short/load/SMA female to female connector), 2x 16cm/6.3inch SMA male to male RG174 RF cable, 1x USB Type-C data cable, 1x Type-C to Type-C cable, 1x Lanyard with stylus, 1x stylus pen, 1x User Manual
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
See On Amazon #3
2023 Upgraded TinySA Ultra Spectrum Analyzer, SeeSii 4.0 Inch 100kHz to 5.3GHz Handheld Tiny Frequency Analyzer with 32Gb Card, 2-in-1 Signal Generator 100kHz to 800MHz MF/HF/VHF UHF Input,V0.4.5.1
Asin: B0BBGK9QJB | Model: SEESII- TinySA ULTRA | PartNumber: SEESII- TinySA ULTRA
✅【2 In 1 Multifunctional Frequency Analyzer & Signal Generator】:When Not Used As Spectrum Analyzer It Can Be Used As Signal Generator,With Sine Wave Output Between 0.1-800Mhz Or Square Wave Or Dual Tone Output Up To 4.4Ghz.Built-In Calibration Signal Generator That Is Used For Automatic Self Test And Low Input Calibration..
✅【Package List】:1X Tinysa Ultra Spectrum Analyzer; 2 X30cm Alsr100 Sma Cables;1 X Usb Type-C Data Cable;1 X Sma-Sma Barrel Connector ;1X Tlanyard And Touch Plectrum;1 X Antenna With Sma Connector.1 X32gb Microsd Card(Plugged In The Host), 1 X Touchscreen Pen. It's Very Useful As An Antenna Analyzer For Your Ham Station, Easy To Set Without Fancy Calibration..
✅【Ultra-Long Battery Life】:The Upgraded Tinysa Analyzer Built-In 3000M-Ah Rechargeable Battery,With Type-C Charging Cable And Led Charging Indicator,It Can Be Fully Charged Within 3 Hours,No Need To Charge Frequently..
✅ 【200Hz-850Khz Rbw】:The Rbw Is As Low As 200Hz, Which Can Effectively Distinguish Adjacent Signals And Meet The Requirements Of Ssb Dual-Satellite Inter-Modulation Test. Input Step Attenuator From 0Db To 31Db (Can Not Be Used Not In Combination With Lna)..
✅【Pc Control】:Connected To A Pc Via Usb It Becomes A Pc Controlled Spectrum Analyzer Or Signal Generator.Tinysa-App Transfers Data Directly To The Computer.The Usb Interface Implements Cdc Protocol And There Is A Large Set Of Commands That Can Be Invoked Over The Serial Interface. These Command Can Be Used To Perform Measurements Or Update Internal Settings. The Driver For Windows Will Install Automatically After Connecting To A Windows Pc. The Driver For Linux Is Built Into The Kernel..
✅【Frequency Range】:Compared To The Tinysa (100Khz To 960Mhz), The Upgraded Tinysa Ultra Has 100Khz To 5.3Ghz Ultra-Wide Measuring Frequency Range, Spectrum Analyzer For 0.1-800Mhz, With Ultra Mode Up To 0.1Mhz-6Ghz.Switchable Resolution Band Pass Filters For Both Ranges Between 200Hz To 850Khz. Color Display Showing 450 Scan Points Covering Up To The Full Low Or High Frequency Range. Faster And More Accurate Measurement Performance, You Can Easily Cope With Measurement Testes In Various Fields..
Features
- 2023 Upgraded TinySA Ultra :This New Version V0.4.5.1 Spectrum Analyzer is developed by Hugen, with 4.0 inch 480 x 320 large touchscreen display, 100kHz to 5.3GHz widely measure range, with the new ESD protection function, the product has a higher anti-static level and a longer service life, and built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage.
- Frequency Range :Compared to the tinysa (100kHz to 960MHz), the upgraded tinysa ULTRA has 100kHz to 5.3GHz ultra-wide measuring frequency range, spectrum analyzer for 0.1-800MHz, with Ultra mode up to 0.1MHz-6GHz.Switchable resolution band pass filters for both ranges between 200Hz to 850kHz. Color display showing 450 scan points covering up to the full low or high frequency range. Faster and more accurate measurement performance, you can easily cope with measurement testes in various fields.
- 2 in 1 Multifunctional Frequency Analyzer & Signal Generator :When not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz.Built-in calibration signal generator that is used for automatic self test and low input calibration.
- PC Control :Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer or Signal Generator.Tinysa-APP transfers data directly to the computer.The USB interface implements CDC protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.
- Ultra-long Battery Life :The upgraded tinysa analyzer built-in 3000m-ah rechargeable battery,with type-C charging cable and LED charging indicator,it can be fully charged within 3 hours,no need to charge frequently.
- 200Hz-850kHz RBW :The RBW is as low as 200Hz, which can effectively distinguish adjacent signals and meet the requirements of SSB dual-satellite inter-modulation test. Input Step attenuator from 0dB to 31dB (can not be used not in combination with LNA).
- Package List :1x Tinysa ULTRA Spectrum Analyzer; 2 x30cm ALSR100 SMA cables;1 x USB Type-C data cable;1 x SMA-SMA barrel connector ;1x TLanyard and touch plectrum;1 x Antenna with SMA connector.1 x32GB MicroSD card(plugged in the host), 1 x Touchscreen pen. It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Dimensions: 2.56 x 6.69 x 4.72 Inches | Weight: 0.58 pounds
See On Amazon #4
Portable Tinysa Spectrum Analyzer, AURSINC V0.3.1 Handheld Frequency Analyzer, Signal Generator 100kHz to 960MHz MF/HF/VHF UHF Input ESD Protected Function with 2.8 inch Touchscreen
Asin: B08H1S2SYR | Model: TinySA Spectrum Analyzer | PartNumber: TinySA Spectrum Analyzer | Ean: 0753318593381 | UPC: 753318593381
[2 In 1 Device] - When Not Used As Spectrum Analyzer It Can Be Used As Signal Generator, Mf/Hf/Vhf Sinus Output Between 0.1Mhz-350Mhz, Uhf Square Wave Output Between 240Mhz-960Mhz. Built-In Calibration Signal Generator Enables Automatic Self-Test And Low Input Calibration. The Tinysa Includes All The Components Of A Traditional Heterodyne Swept Spectrum Analyzer, With A Color Display Showing 290 Scan Points Covering Up To The Full Low Or High Frequency Range.
[Pc Control] - The Usb Interface Realizes The Serial Over Usb (Cdc) Protocol And A Large Number Of Commands Can Be Called Through The Serial Interface. The Commands Can Be Used For Measurements Or Updating Internal Settings. The Windows Driver Will Automatically Install Upon Connecting To A Windows Pc. The Driver For Linux Is Built Into The Kernel. Tinysa-App Is Available To Control The Tinysa And Capture Its Screen..
[Package List] - 1X Tiny Sa Spectrum Analyzer(With 500Mah Battary, 2.8Inch Touchsreen) ; 2X 20Cm/7.87Inch Rf Cable; 1X Usb-C Cable ; 2X Sma Female To Female Connector; 1X Touchscreen Pen; 1X Sma Telescopic Antenna. Reliability You Can Trust, Our Spectrum Analyzer Caters To Your Diverse Needs..
[4 Input/Output Spec Modes] - The Input/Output Spec Of The Tinysa Is Divided Into 4 Modes: Low Input, High Input, Low Output, And High Output. Spectrum Analyzer Has Two Inputs: High-Quality Mf/Hf/Vhf Input For 0.1Mhz-350Mhz; Lower-Quality Uhf Input For 240Mhz-960Mhz. Switchable Resolution Bandpass Filters Ranging From 2.6Khz To 640Khz.
[Frequency Range] - The Tinysa Spectrum Analyzers Use A Resolution Filter To Isolate Input Power Within A Narrow Frequency Range. This Resolution Filter Is Swept Across The Desired Frequency Range. The Fastest Scanning Speed Occurs With An Rbw Or 300Khz Or Wider And Is About 2 Scans Per Second. The Scanning Speed Decreases Rapidly As The Frequency Span Increases And The Rbw Decreases. A Scan From 0Mhz To 350Mhz With An Rbw Of 10Khz Takes About 2 Minutes.
Features
- [Upgraded Version: ESD Protection Diodes] - Tinysa produced by Hugen, with V0.3.1 hardware. The firmware of the tinySA can be updated, for newest firmware version update, please refer to: tinysa .org. The displayed version info indicates "ESD protection" with a diode for improved stability, sensitivity, anti-static level and longevity
- [Frequency Range] - The tinysa spectrum analyzers use a resolution filter to isolate input power within a narrow frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. The scanning speed decreases rapidly as the frequency span increases and the RBW decreases. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes
- [2 in 1 Device] - When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator enables automatic self-test and low input calibration. The tinysa includes all the components of a traditional heterodyne swept spectrum analyzer, with a color display showing 290 scan points covering up to the full low or high frequency range
- [4 Input/Output Spec Modes] - The input/output spec of the tinysa is divided into 4 modes: Low Input, High Input, Low Output, and High Output. Spectrum Analyzer has two inputs: high-quality MF/HF/VHF input for 0.1MHz-350MHz; lower-quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters ranging from 2.6kHz to 640kHz
- [PC Control] - The USB interface realizes the Serial over USB (CDC) protocol and a large number of commands can be called through the serial interface. The commands can be used for measurements or updating internal settings. The Windows driver will automatically install upon connecting to a Windows PC. The driver for Linux is built into the kernel. Tinysa-APP is available to control the tinysa and capture its screen.
- [Package List] - 1x Tiny sa Spectrum Analyzer(with 500mah battary, 2.8inch touchsreen) ; 2x 20cm/7.87inch RF Cable; 1x USB-C Cable ; 2x SMA Female to Female Connector; 1x Touchscreen Pen; 1x SMA Telescopic Antenna. Reliability you can trust, our spectrum analyzer caters to your diverse needs.
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Dimensions: 1.57 x 6.50 x 4.00 Inches
See On Amazon #5
SEESII Nanovna-H Vector Network Analyzer,Upgraded HW3.6 10KHz-1.5GHz MF HF VHF UHF Antenna Analyzer, Measuring S Parameters, Voltage Standing Wave Ratio,Phase,Delay,Smith Chart,Support Data Storage
Asin: B08132DJLS | Model: NanoVNA-H | PartNumber: NanoVNA-H | Ean: 0889251491337 | UPC: 889251491337
✅ 【Multi Tx/Rx Function】:The Default Firmware Is Mainly Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11/S21 Parameters (Need To Manually Replace The Transceiver Port Wiring)..
✅ 【Built-In Micro-Sd Port & Time Display】: The Lastest Antenna Analyzer With Microsd Card Port,So You Can Save Field Test Data Or Screens To A Microsd Card At Any Time,Support Up To 32Gb Memory Card. (Not Include In The Pacakge).In Addition, Different From Old Version Nanovnas, The Date And Time Can Be Customized, Which Is Convenient For You To Further Record And Save Data..The Default Firmware Main Function Is Used For Antenna Performance Measurement..
🎁【Abundant Accessories】:Come With 1X Nanovna-H Host, 2X 30Cm Sma Male To Male Rg174 Rf Cable, 1X Sma Female To Female Connector,1X Sma Short,Open &Load Simple Calibration Kit,1X Usb Type-C Data Cable, 1 X Usb-C To Usb-C Line, 1X Lanyard And Touch Plectrum. All The Accessories Are Packaged In A Sophisticated Box.This Is Perfect Vna Analyzer For Your Own Use Or As A Gift For Your Friend..
✅ 【Android Phone & Pc Software Control】:The Nanovna Analyzer Uses Pc Software Nanovnasaver, It Can Connect To A Nanovna And Extracts The Data For Display On A Computer For Saving To Touchstone Files. We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software.We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software.In Addition,The Vna Support Usb-C To Usb-C Line, More Convenient To Connect To Mobile Phones. It Is Compatible With Most Android Phones With The Same Screen Display (Doesnt Support For Iphone)..
✅ 【Improved Frequency Algoruthm】: The Improved Frequency Algorithm Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The Metal Shield Is Designed To Reduce The External Interference And Improve The Measurement Accuracy. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics.The Default Firmware Main Function For Vector Network Analyzer Is Used For Antenna Performance Measurement..
Features
- Upgraded Nanovna-H HW3.6 : SeeSii Nanovna-H Vector Network Analyzer is developed by Hugen. With latest 3.6 version,10KHz-1.5GHz measure range,2.8 inch LCD touchscreen,mini and portable design.This Antenna Analyzer is provides outstanding vector network measurement capabilities and perfect for evaluating antenna resonance and SWR.It is a very mini handy & smart analyzer for electronics engineer, amateur radio operators or radio diy amateurs.
- Improved Frequency Algoruthm : The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The metal shield is designed to reduce the external interference and improve the measurement accuracy. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.The default firmware main function for vector network analyzer is used for antenna performance measurement.
- Multi TX/RX Function :The default firmware is mainly used for antenna performance measurement. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring).
- Android Phone & PC Software Control :The nanovna analyzer uses PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data for display on a computer for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software.We can export Touchstone (snp) files for various radio design and simulation software through PC software.In addition,the vna support USB-C to USB-C line, more convenient to connect to mobile phones. It is compatible with most Android phones with the same screen display (doesnt support for iPhone).
- Built-in Micro-SD Port & Time Display : The lastest antenna analyzer with MicroSD card port,so you can save field test data or screens to a MicroSD card at any time,support up to 32GB memory card. (Not include in the pacakge).In addition, different from old version NanoVNAs, the date and time can be customized, which is convenient for you to further record and save data..The default firmware main function is used for antenna performance measurement.
- Abundant Accessories :Come with 1x NanoVNA-H host, 2x 30cm SMA Male to Male RG174 RF Cable, 1x SMA Female to Female Connector,1x SMA SHORT,OPEN &LOAD simple calibration kit,1x USB Type-C Data Cable, 1 x USB-C to USB-C Line, 1x Lanyard and touch plectrum. All the accessories are packaged in a sophisticated box.This is perfect vna analyzer for your own use or as a gift for your friend.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Weight: 0.44 Pounds
See On Amazon #6
Upgraded NanoVNA-H4 Vector Network Analyzer, SeeSii Latest V4.3/4.2 10KHz-1.5GHz HF VHF UHF 4" Touch Screen Antenna Analyzer Measures S Parameters,Voltage Standing Wave Ratio, Phase,Delay, Smith Chart
Asin: B085CFHTBM | Model: NanoVNA-H4 | PartNumber: NanoVNA-H4 | Ean: 0889251537400 | UPC: 889251537400
😊【Improved Frequency Algorithm】:The Vector Network Analyzer Can Use The Old Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics.Great For Trouble Shooting Antennas And Improving Performance..
🎁【Abundant Accessories】:Equipped With 1X Nanovna-H4(With 1950Ma-H Battery), 1X Usb Type-C Cable, 2 X 15Cm Sma Male To Male Rg316 Rf Cable, 1X Sma Male Calibration Kit - Open,1X Sma Male Calibration Kit - Short ,1 X Sma Male Calibration Kit - Load,1 X Touchscreen Pen.It's Very Useful As An Antenna Analyzer For Your Ham Station, Easy To Set Without Fancy Calibration. Note: The Function Of The Versions 4.2/4.3 Is The Same, It Will Be Shipped Randomly..
😊【Pc Connection & Tx/Rx Function】:The Vna Analyzer Uses Pc Software Nanovnasaver, It Can Connect To A Nanovna And Extracts The Data For Display On A Computer For Saving To Touchstone Files. We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software.In Addition,The Default Firmware Is Mainly Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11/S21 Parameters (Need To Manually Replace The Transceiver Port Wiring)..
😊【Built-In Micro-Sd Port & Time Display】: The Lastest Antenna Analyzer With Microsd Card Port,So You Can Save Field Test Data Or Screens To A Microsd Card At Any Time,Support Up To 32Gb Memory Card. (Not Include In The Pacakge).In Addition, Different From Old Version Nanovnas, The Date And Time Can Be Customized, Which Is Convenient For You To Further Record And Save Data..The Default Firmware Main Function Is Used For Antenna Performance Measurement..
Features
- 2022 UPGRADED NANOVNA ANALYZER : SeeSii Nanovna-h4 Vector Network Analyzer is developed by Hugen. With latest 4.3 version,10KHz-1.5GHz measure range,4.0 inch LCD touchscreen,mini and portable design.This Antenna Analyzer is provides outstanding vector network measurement capabilities and perfect for evaluating antenna resonance and SWR.It is a very handy & smart analyzer for electronics engineer, amateur radio operators or radio diy amateurs.
- BUILT-IN MICRO-SD PORT & TIME DISPLAY : The lastest antenna analyzer with MicroSD card port,so you can save field test data or screens to a MicroSD card at any time,support up to 32GB memory card. (Not include in the pacakge).In addition, different from old version NanoVNAs, the date and time can be customized, which is convenient for you to further record and save data..The default firmware main function is used for antenna performance measurement.
- IMPROVED FREQUENCY ALGORITHM :The Vector Network Analyzer can use the old harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.Great for trouble shooting antennas and improving performance.
- PC CONNECTION & TX/RX FUNCTION :The vna analyzer uses PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data for display on a computer for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software.In addition,the default firmware is mainly used for antenna performance measurement. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring).
- Abundant Accessories :Equipped with 1x NanoVNA-H4(with 1950mA-h battery), 1x USB Type-C cable, 2 x 15cm SMA male to male RG316 RF cable, 1x SMA male calibration kit - OPEN,1x SMA male calibration kit - SHORT ,1 x SMA male calibration kit - LOAD,1 x Touchscreen pen.It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration. Note: The function of the versions 4.2/4.3 is the same, it will be shipped randomly.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Weight: 1.00 pounds
See On Amazon #7
Portable TinySA Spectrum Analyzer,SEESII Upgraded V0.3.1 Handheld Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input,Signal Generator with 2.8 inch Touch Screen with ESD Protect Function
Asin: B08FB5XT7B | Model: TinySA | PartNumber: TinySA | Ean: 6933834650971
【Tiny Spectrum Analyzers & Esd Function】Switchable Resolution Bandpass Filters For Both Ranges Between 2.6Khz And 640Khz.Color Display Showing 290 Scan Points Covering Up To The Full Low Or High Frequency Range. Bulit-In Rechargeable Battery Allowing A Minimum Of At Least 2 Hours Portable Use.The Performance Of The 2021 Latest Version 3.1 Will Be More Stable And Sensitive, With A New Esd Protrcted Function Enable The Product To Have A Higher Antistatic Level And A Longer Service Life..
【Package List】1X Tiny Spectrum Analyzer; 2 X 20Cm Rf Cable;1 X Usb Cable;1 X Sma Female To Female Connector;1X Touchscreen Pen;1 X Sma Telescopic Antenna.It's Very Useful As An Antenna Analyzer For Your Ham Station, Easy To Set Without Fancy Calibration.The Firmware Of The Tinysa Can Be Updated By The User. New Versions Of The Firmware Needed Please Contact Seller For Download Link..
【Pc Control】Connected To A Pc Via Usb It Becomes A Pc Controlled Spectrum Analyzer.The Usb Interface Implements The Serial Over Usb (Cdc) Protocol And There Is A Large Set Of Commands That Can Be Invoked Over The Serial Interface. These Command Can Be Used To Perform Measurements Or Update Internal Settings. The Driver For Windows Will Install Automatically After Connecting To A Windows Pc. The Driver For Linux Is Built Into The Kernel..
【Built-In Calibration Signal Generator】When Not Used As Spectrum Analyzer It Can Be Used As Signal Generator, Mf/Hf/Vhf Sinus Output Between 0.1Mhz-350Mhz, Uhf Square Wave Output Between 240Mhz-960Mhz. Built-In Calibration Signal Generator That Is Used For Automatic Self Test And Low Input Calibration..
Features
- Frequency Range Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer.
- Built-in Calibration Signal Generator When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration.
- Tiny Spectrum analyzers & ESD Function Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life.
- PC Control Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.
- Package List 1x Tiny Spectrum Analyzer; 2 x 20cm RF Cable;1 x USB Cable;1 x SMA Female to Female Connector;1x Touchscreen Pen;1 x SMA Telescopic Antenna.It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.The firmware of the tinySA can be updated by the user. New versions of the firmware needed please contact seller for download link.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Weight: 2.20 pounds
See On Amazon #8
Filter Attenuator,Seesii RF Demo Kit NanoVNA RF Tester Board Filter Attenuator for NanoVNA-F NanoVNA-H Vector Network Analyzer Kits
Asin: B084MDG76T | Ean: 0889251537233 | UPC: 889251537233
Can Be Used With Nanovna-F To Measure 6.5M Ceramic Notch Filter..
This Is A Vector Network Analyzer Learner Tool. Package Included 1X Pcb Rf Tester Board, 2 X 20Cm Adapter Cables.
Can Be Used With Nanovna-F To Measure Homemade Low-Pass-Filter, 3Db Bandwidth About 400Mhz..
Compact And Lightweight, Easy To Operate And Use..
Features
- Made of fine quality material, practical, has a long service life.
- Compact and lightweight, easy to operate and use.
- Can be used with NanoVNA-F to measure 6.5M ceramic notch filter.
- Can be used with NanoVNA-F to measure homemade low-pass-filter, 3dB bandwidth about 400MHz.
- This is a vector network analyzer learner tool. Package Included 1x PCB RF tester board, 2 x 20cm adapter cables
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Weight: 0.08 Pounds
See On Amazon #9
RF Test Board, 18 Functional Modules RF Demo Kit NanoVNA RF Test Module Vector Network Analyzer Board Filter/Attenuator Module
Asin: B082MHWTT9 | Ean: 0738587184799 | UPC: 738587184799
【Specification 】--Rlc Series And Parallel Circuit Includes R, L, C And Combinational Circuits;Open /Short Circuit And Load Calibration Circuit;The Attenuation Circuit..
【Quality Assurance】-- 100% Brand New And The Quality Of Our Products Is Guaranteed And Can Be Used Without Hesitation. If You Have Any Questions During Use, Please Feel Free To Contact Us..
【18 Functional Modules& 2 Pcs Of Ufl Patch Cord】-- The Board Is Totally Integrated With 18 Functional Modules.Equipped With 2 Pcs Of Ufl Patch Cord For Convenient Use.Each Module Is Well Selected Of High Quality And Great Reliability.The Board Is Small And Light ,Suitable For Carrying With..
【The Filter】--Short-Wave Low-Pass Filter Lpf: 30Mhz;Fm High-Pass Filter Hpf: 100Mhz;Commonly Used Saw Bandpass Filter Bpf: 433Mhz;Video Ceramic Trap Bsf: 6.5Mhz.
Features
- RF Test Board --RF Demo Kit RF test board demo calibration board for learning Vector Network Analyzer , Antenna Analyzer test calibration learning.the RF test board is useful for beginners who want to discover the secrets of spectrum/vector analyzer.
- The Filter --Short-wave low-pass filter LPF: 30MHz;FM high-pass filter HPF: 100MHz;Commonly used SAW bandpass filter BPF: 433MHz;Video ceramic trap BSF: 6.5MHz
- Specification --RLC series and parallel circuit Includes R, L, C and combinational circuits;Open /short circuit and load calibration circuit;The attenuation circuit.
- 18 Functional Modules& 2 Pcs Of Ufl Patch Cord -- The board is totally integrated with 18 functional modules.Equipped with 2 pcs of UFL patch cord for convenient use.Each module is well selected of high quality and great reliability.The board is small and light ,suitable for carrying with.
- Quality Assurance -- 100% brand new and the quality of our products is guaranteed and can be used without hesitation. If you have any questions during use, please feel free to contact us.
- See more on Amazon...
Brand: Yanmis | Manufacturer: Yanmis
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.09 pounds
See On Amazon #10
NanoVNA-H4 Vector Network Analyzer with 32GB Card, V4.3 10KHz -1.5GHz Upgraded HF VHF UHF Antenna Analyzer 4" Touch Screen, Voltage Standing Wave Ratio, Phase,Delay, Smith Chart
Asin: B0CJ2D4CZP
【Built-In Micro-Sd Port And Customisable Time】The Latest Design Of This Antenna Analyzer With Microsd Card Port Supports Up To 32Gb Memory Card (Included In Set), So You Can Save Your Field Test Data Or Screen To Microsd Card At Any Time, And The New Feature Of Customisable Date And Time Makes It Convenient For You To Further Record And Save Data..
【Pc Connection & Tx/Rx Function】The Nanovna-H4 Network Analyzer Comes With Pc Connectivity And A Built-In 1950Mah Battery. The Nanovnasave Pc Software Can Be Used To Connect To Nanovna, Extract Data For Display On The Pc And Save To A Touchstone File.The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. The Tx/Rx Method Can Measure The Complete S11/S21 Parameters (Need To Manually Replace The Transceiver Port Wiring)..
【Improved Frequency Algorithm】Vector Network Analyzer Uses The Direct Output Of The Si5351 To Provide Better Than 70Db Of Dynamics In The 50K-300Mhz Frequency Range, Better Than 60Db Of Dynamics In The Extended 300M-900Mhz Band, And Better Than 40Db Of Dynamics In The 900M-1.5Ghz Band. Si5351 The Old Harmonics Of The Si5351 Are Extended To Support Measurements Up To 1.5Ghz, Making It Ideal For Troubleshooting A Wide Range Of Antennas..
【Latest Upgrade】Nanovna-H4 Vector Network Analyzer Is The Latest Version 4.3 With 4.0 Inch Large Lcd Touch Screen, 10Khz-1.5Ghz Measurement Range, Easy To Use, Compact And Portable, Perfect For Field Work. The Antenna Analyzer Measuring Is Ideal For Evaluating Antenna Resonance And Swr, And Can Be Easily Operated By Electronic Engineers, Amateur Radio Operators Or Radio Diy Enthusiasts After Learning From The Video..
Features
- NanoVNA-H4 Vector Network Analyzer Equipped with 1X NanoVNA-H4 analyzer (with 1950mAh battery), 1X USB Type-C cable, 1X Type-C to Type-C cable, 2 x 15cm SMA male to male RG316 RF cable, 1x SMA male calibration kit - OPEN,1x SMA male calibration kit - SHORT ,1 x SMA male calibration kit - LOAD, 1 x Touchscreen pen, (Added 1 x 32GB memory card)
- Latest Upgrade NanoVNA-H4 Vector Network Analyzer is the latest version 4.3 with 4.0 inch large LCD touch screen, 10KHz-1.5GHz measurement range, easy to use, compact and portable, perfect for field work. The Antenna Analyzer Measuring is ideal for evaluating antenna resonance and SWR, and can be easily operated by electronic engineers, amateur radio operators or radio DIY enthusiasts after learning from the video.
- Built-in MICRO-SD port and customisable time The latest design of this antenna analyzer with MicroSD card port supports up to 32GB memory card (included in set), so you can save your field test data or screen to MicroSD card at any time, and the new feature of customisable date and time makes it convenient for you to further record and save data.
- Improved frequency algorithm Vector Network Analyzer uses the direct output of the Si5351 to provide better than 70dB of dynamics in the 50K-300MHz frequency range, better than 60dB of dynamics in the extended 300M-900MHz band, and better than 40dB of dynamics in the 900M-1.5GHz band. si5351 The old harmonics of the si5351 are extended to support measurements up to 1.5GHz, making it ideal for troubleshooting a wide range of antennas.
- PC connection & TX/RX function The NanoVNA-H4 Network Analyzer comes with PC connectivity and a built-in 1950mAh battery. The NanoVNASave PC software can be used to connect to NanoVNA, extract data for display on the PC and save to a Touchstone file.The TX/RX method can measure the complete S11 and S21 parameters. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring).
- See more on Amazon...
Brand: TOSTOG | Manufacturer: TOSTOG
See On Amazon #11
SMA Calibration Kits for Antenna Analyzer NanoVNA F H V2 H4 SAA Mini1300 PS100 Vector Network Analyzer Calibrate RF Coaxial Test Connector Short/Load/Open/Thru/Jumper/F2F/M2M Type 6 pcs/Set
Asin: B09Z6S85QL | Model: CAL08 | PartNumber: CAL08
Material: Copper，Shape: Circle..
We Add One Sma Male To Male Jumper For Thru Calibration Step..
Connector: Sma Male For Short And Load..
Input Impedance: 50 Ohm, Vswr: Less Than 1.1.
Features
- Frequency: Up to 6GHz
- Input impedance: 50 Ohm, VSWR: less than 1.1
- Material: Copper Shape: Circle.
- Connector: SMA Male For Short and Load.
- We add one SMA male to male jumper for Thru Calibration step.
- See more on Amazon...
Brand: Tuidudi | Manufacturer: RockCow
See On Amazon #12
AURSINC NanoVNA-F V2 Vector Network Analyzer, 50KHz-3GHz Antenna Analyzer Ham Radio HF VHF UHF 4.3inch screen 5000mAh Battery Measuring S-Parameters Voltage Standing Wave Ratio Phase Delay Smith Chart
Asin: B0B42C2H5V | Model: NanoVNA-F V2 | PartNumber: NanoVNA-F V2
[Design Of Aluminum Cases] Rugged And Durable Aluminum Alloy Cases, Shielding Electromagnetic Interference To Ensure Precise Measurements. The Sma Radio Frequency Interface Enables Seamless Connectivity With Various Measurement Devices.
[Packing List] 1X Nanovna F V2 Host, 1X Sma Open Calibration Kit, 1X Sma Short-Circuit Calibration Kit, 1X Sma 50Ω Load Calibration Kit, 1X Sma-Kk Double-Head Female Hole Adapter, 1X Sma-Jj Double-Head Male Pin Adapter, 1X Sma-Jkw Elbow Outer Screw Inner Hole To Inner Screw Inner Needles Adapter, 2X 20Cm Sma-Jj Rg405 Rf Cable, 1X Usb Type-C Data Cable, 1X Stylus.
[Pc & Android Phone Control] Nanovna F V2 Hardware Is Supported By A Program "Nanovna Saver", Using Nanovna-Saver Connect To The Nanovna, Extracts Data For Display And Save Data In Touchstone Files. The Scada Software Enables Us To Export Touchstone (Snp) Files For Various Radio Design And Simulation Software. Supports Android Mobile Phone Only (Please Download The Product Document For Details).
[Nanovna Saver Notes] It Could Run On Windows 7 Embedded Control System With Your Own Software. For Win8 And Earlier Versions Of The Windows System, You Need To Install The Driver: St.Com/En/Development-Tools/Stsw-Stm32102.Html. For Nanovna-Saver You Need To Try, We Do Not Support Any Win10 Earlier Versions System. Software Upgrade The Website: Sysjoint.Com/En/Content/?144.Html. Any Questions Please Contact Us..
[4.3'' Screen & 5000Mah Battery] The Nano Vna Has A 4.3-Inch Ips Tft Lcd Screen With A Resolution Of 800*480 And A Resistive Touch Screen, Providing A Large Viewing Angle. It Is Equipped With An 5000Mah Lithium Battery For Longer Standby Time, Up To 7 Hours Of Usage. With The Use Of A 2A Large-Current Charging Ic, The Charging Time Is Reduced. As An Add-On, It Built-In 5V Output For Charging Android Phones Or Tablets.
[Frequency Range] The Measurement Range Of Nanovna-F V2 Expanded To 50Khz-3Ghz. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters, S21 Dynamic Ranges: 70Db (1.5Ghz), 60Db (3Ghz); S11 Dynamic Ranges: 50Db (1.5Ghz), 40Db (3Ghz).
Features
- [Upgraded Version] The NanoVNA-F V2 upgraded to the latest firmware V0.4.0, the operation page is compatible with Nanovna-F. More features that it enables measurements of S-parameter, voltage standing wave ratio (SWR), phase map, group delay, Smith chart, DELAY, POLAR, LINEAR and more
- [Frequency Range] The measurement range of nanovna-f v2 expanded to 50KHz-3GHz. The TX/RX method can measure the complete S11 and S21 parameters, S21 dynamic ranges: 70dB (1.5GHz), 60dB (3GHz); S11 dynamic ranges: 50dB (1.5GHz), 40dB (3GHz)
- [Design of Aluminum Cases] Rugged and durable aluminum alloy cases, shielding electromagnetic interference to ensure precise measurements. The SMA radio frequency interface enables seamless connectivity with various measurement devices
- [4.3'' Screen & 5000mAh Battery] The nano vna has a 4.3-inch IPS TFT LCD screen with a resolution of 800*480 and a resistive touch screen, providing a large viewing angle. It is equipped with an 5000mAh lithium battery for longer standby time, up to 7 hours of usage. With the use of a 2A large-current charging IC, the charging time is reduced. As an add-on, it built-in 5V output for charging Android phones or tablets
- [PC & Android Phone Control] NanoVNA F V2 hardware is supported by a program NanoVNA Saver, using Nanovna-Saver connect to the nanovna, extracts data for display and save data in Touchstone files. The SCADA software enables us to export Touchstone (snp) files for various radio design and simulation software. Supports Android Mobile Phone only (Please download the product document for details)
- [NanoVNA Saver Notes] it could run on windows 7 embedded control system with your own software. For Win8 and earlier versions of the Windows system, you need to install the driver: st.com/en/development-tools/stsw-stm32102.html. For NanoVNA-Saver you need to try, we do not support any win10 earlier versions system. Software Upgrade the website: sysjoint.com/en/content/?144.html. Any questions please contact us.
- [Packing List] 1x Nanovna f v2 Host, 1x SMA Open Calibration Kit, 1x SMA Short-circuit Calibration Kit, 1x SMA 50 Load Calibration Kit, 1x SMA-KK Double-Head Female Hole Adapter, 1x SMA-JJ Double-Head Male Pin Adapter, 1x SMA-JKW Elbow Outer Screw Inner Hole To Inner Screw Inner Needles Adapter, 2x 20cm SMA-JJ RG405 RF Cable, 1x USB Type-C Data Cable, 1x Stylus
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Dimensions: 0.80 x 5.10 x 2.85 inches | Weight: 0.94 Pounds
See On Amazon #13
2024 Upgraded Mini1300 Antenna Analyzer 0.1Mhz~1300MHz with SMA Calibration Kits Vector Network Analyzer Multitester Portable Aluminum Shell HF VHF UHF All Bands
Asin: B09KGXL4L3
Measurement Mode: Single Point Measurement, Scanning (Frequency Sweep), And Tdr Mode. Portable And Compact, Easy To Operate And Carry.
Aluminum Shell: Better Rf Performance Than Plastic Shell.
Swr Measurement Range: 1.0-1999（Single Point Mode), 1.0-20.0 (Scan Mode).
Frequency Range: 0.1-1300Mhz, Hf, Vhf, Uhf All Bands Continuous Coverage.
Features
- Upgraded version: With SMA Open Short Load Calibration Kits , easy to Calibrate directly.
- Frequency range: 0.1-1300MHz, HF, VHF, UHF All bands continuous coverage
- Measurement Mode: Single point measurement, Scanning (Frequency Sweep), and TDR Mode. Portable and compact, easy to operate and carry
- SWR MeasureMent Range: 1.0-1999 Single Point Mode), 1.0-20.0 (Scan Mode)
- Aluminum shell: Better RF performance than plastic shell
- See more on Amazon...
Brand: Tuidudi | Manufacturer: RockCow
Dimensions: 3.35 x 5.31 x 1.18 inches
See On Amazon #14
4-Inch TinySA Ultra Spectrum Analyzer V0.4.5.1,100kHz-5.3GHz Handheld Frequency Analyzer 3000mAh,Support PC Control & 32GB Card Saving,2-in-1 Signal Generator 100kHz to 800MHz MF/HF/VHF UHF Input
Asin: B0BR59L8MY | Ean: 5057803514215
【Ultra-Long Battery Life】The Upgraded Tinysa Analyzer Built-In 3000M-Ah Rechargeable Battery,With Type-C Charging Cable And Led Charging Indicator,It Can Be Fully Charged Within 3 Hours,No Need To Charge Frequently..
【Package List】1 X Tinysa Ultra Spectrum Analyzer; 2 X 30Cm Alsr100 Sma Cables; 1 X Usb Type-C Data Cable; 1 X Antenna With Sma Connector; 1 X Tlanyard And Touch Plectrum; 1 X Antenna With Sma Connector; 1 X 32Gb Microsd Card(Plugged In The Host), 1 X Lanyard And Touch Plectrum..
【Convenient Pc Control And Data Transfer】When Connected To A Computer Via Usb, The Antenna Analyzer Ham Radio Can Be Used As A Pc-Controlled Frequency Analyzer Or Signal Generator. Tinysa-App Makes It Easy To Transfer Data To A Computer For Enhanced Analysis And Control..
【2 In 1 Multifunctional Frequency Analyzer & Signal Generator】When Not Used As Spectrum Analyzer It Can Be Used As Signal Generator,With Sine Wave Output Between 0.1-800Mhz Or Square Wave Or Dual Tone Output Up To 4.4Ghz.Built-In Calibration Signal Generator That Is Used For Automatic Self Test And Low Input Calibration..
Features
- Wide Frequency Range TinySA ULTRA measures from 100KHz - 5.3GHz: Spectrum Analyzer for 0.1-800MHz, with Ultra mode enabled, level calibrated up to 6GHz, can observe signals up to 12GHz. Switchable resolution bandpass filters from 200Hz to 850kHz.
- 2 in 1 Multifunctional Frequency Analyzer & Signal Generator When not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz.Built-in calibration signal generator that is used for automatic self test and low input calibration.
- Ultra-long Battery Life The upgraded tinysa analyzer built-in 3000m-ah rechargeable battery,with type-C charging cable and LED charging indicator,it can be fully charged within 3 hours,no need to charge frequently.
- Convenient PC Control and Data Transfer When connected to a computer via USB, the antenna analyzer ham radio can be used as a PC-controlled frequency analyzer or signal generator. Tinysa-APP makes it easy to transfer data to a computer for enhanced analysis and control.
- Package List 1 x Tinysa ULTRA Spectrum Analyzer; 2 x 30cm ALSR100 SMA cables; 1 x USB Type-C data cable; 1 x Antenna with SMA connector; 1 x TLanyard and touch plectrum; 1 x Antenna with SMA connector; 1 x 32GB MicroSD card(plugged in the host), 1 x Lanyard and Touch Plectrum.
- See more on Amazon...
Brand: DmgicPro | Manufacturer: DmgicPro
Dimensions: 0.91 x 4.61 x 2.83 inches | Weight: 0.88 pounds
See On Amazon #15
Spectrum Analyzer, 2023 Upgraded TinySA Ultra Spectrum Analyzer with 4.0 Inch Sensitive Touch Screen, Handheld Tiny Frequency Analyzer ith 32Gb Card, 2-in-1 Signal Generator
Asin: B0C9M77B8T
【Frequency Analyzer And Signal Generator 2-In-1】：When Not Used As A Spectrum Analyzer,It Can Be Used As A Signal Generator With A Built-In Calibration Signal Generator For Automatic Self-Test And Low Input Calibration.100K-800Mhz Sine Wave Output; 800Mhz-4.4Ghz Square Wave Output; 4.4Ghz-5.4Ghz Mixing Signal Output..
【Package List】:1X Tinysa Ultra Spectrum Analyzer; 2 X30cm Alsr100 Sma Cables;1 X Usb Type-C Data Cable;1 X Sma-Sma Barrel Connector ;1X Tlanyard And Touch Plectrum;1 X Antenna With Sma Connector.1 X32gb Microsd Card(Built Into The Device), 1 X Touchscreen Pen..
【Pc Control】：This Tinysa Spectrum Analyzer Can Connect To The Pc Through Usb,Realize The Usb Serial (Cdc) Protocol,And Can Call A Large Number Of Commands.Built-In Linux Driver,After Connecting To The Windows Computer,The Windows Driver Will Be Automatically Installed..
【Frequency Range】：Compared To Tinysa (100Khz To 960Mhz),Tinysa Ultra Has A Wider Measurement Frequency Range (100Khz To 5.3Ghz),Up To 0.1Mhz-6Ghz In Ultra Mode,Switchable Resolution Band Pass Filters For Both Ranges Between 200Hz To 850Khz.Color Display Showing 450 Scan Points Covering Up To The Low Full Or High Frequency Range.Measurement Performance Is More Faster, Accurater..
Features
- 2023 New Upgrade Enhanced Version This newly upgraded TinySA ultra spectrum analyzer produced by Hugen, equipped with 3000mAh rechargeable lithium battery,can work continuously for more than 8 hours,adopts 4-inch touch display screen,provides clear data images and sensitive operation touch,also have the new ESD protection function,installed the latest V 0.4.5.1 hardware system,and built-in 32Gb micro SD card
- Frequency Range Compared to Tinysa (100kHz to 960MHz),TinySA Ultra has a wider measurement frequency range (100kHz to 5.3GHz),up to 0.1MHz-6GHz in Ultra mode,Switchable resolution band pass filters for both ranges between 200Hz to 850kHz.Color display showing 450 scan points covering up to the low full or high frequency range.Measurement performance is more faster, accurater.
- Frequency Analyzer and Signal Generator 2-in-1 When not used as a spectrum analyzer,it can be used as a signal generator with a built-in calibration signal generator for automatic self-test and low input calibration.100k-800MHz sine wave output; 800MHz-4.4GHz square wave output; 4.4GHz-5.4GHz mixing signal output.
- PC Control This TinySA spectrum analyzer can connect to the PC through USB,realize the USB serial (CDC) protocol,and can call a large number of commands.built-in Linux driver,after connecting to the Windows computer,the Windows driver will be automatically installed.
- Package List :1x Tinysa ULTRA Spectrum Analyzer; 2 x30cm ALSR100 SMA cables;1 x USB Type-C data cable;1 x SMA-SMA barrel connector ;1x TLanyard and touch plectrum;1 x Antenna with SMA connector.1 x32GB MicroSD card(Built into the device), 1 x Touchscreen pen.
- See more on Amazon...
Brand: TOSTOG | Manufacturer: TOSTOG
See On Amazon #16
AURSINC SMA Calibration Kit for NanoVNA H H4 F V2 V3 SAA Mini1300 PS100 Vector Network Analyzer Antenna Analyzer | Calibrate RF Coaxial Test Connector Short/Load/Open/Thru Type 5 pcs/Set
Asin: B082F25WXC | Model: 19120601 | PartNumber: 19120601
Inpedance: 50 Ohm.
Material: Copper, Shape: Circle..
Vswr: Less Than 1.1.
Connector: Sma Male For Short And Load..
Features
- Frequency: DC to 3GHz
- Connector: SMA male for Short and Load.
- Inpedance: 50 Ohm
- VSWR: less than 1.1
- Material: Copper, Shape: Circle.
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
See On Amazon #17
AURSINC NanoVNA SAA-2N V2.2 Vector Network Analyzer 50KHz-3GHz HF VHF UHF Antenna Analyzer Ham Radio Measuring S Parameters, Duplexer, Voltage Standing Wave Ratio, Phase, Delay
Asin: B08G4GXTKK | Model: 20210407 | PartNumber: 20210407 | Ean: 0753318593367 | UPC: 753318593367
✔️[Pc Connection] Nanovna Saa-2N Can Be Controlled By Pc Via Vna-Qt Software,Supported For Linux, Windows (7+), Mac Os Planned. It Also Support Nanovna-Saver For Extracting The Data For Display On A Computer, And For Saving To Touchstore Files.
✔️[Compliance] Saa-2N 3Ghz Vector Network Analyzer, Designed In Collaboration With Owocomm. Under The Lgpl License Agreement, It Is Completely Manufactured According To The V2_2 Files Issued By Owocomm At Development Department, In Line With The Original Technical Specifications.
✔️[Note Recalibrate] The Saa-2N/Nanovna_V2.2 Uses A Similar User Interface To The Nanovna, But With A Different Technical Architecture, The Saa-2N/Nanovna_V2.2 Does Not Load The Initial Calibration Data At Startup, And Does Not Automatically Interpolate The Calibration Data After The User Changes The Frequency, And Must Recalibrate Or Call Back The Calibration Data After Each Startup And Frequency Change. Please Read The User Manual Carefully Before Use To Avoid Damaging The Device.
Features
- [Frequency Range] Transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: -50dB(50KHz-1.5GHz), -40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
- [Note Recalibrate] The SAA-2N/NanoVNA_V2.2 uses a similar user interface to the NanoVNA, but with a different technical architecture, the SAA-2N/NanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device
- [PC Connection] nanovna saa-2n can be controlled by PC via VNA-QT software,supported for Linux, Windows (7+), Mac OS planned. It also support Nanovna-Saver for extracting the data for display on a computer, and for saving to Touchstore files
- [Compliance] SAA-2N 3GHz vector network analyzer, designed in collaboration with OwOComm. Under the LGPL license agreement, it is completely manufactured according to the v2_2 files issued by OwOComm at Development Department, in line with the original technical specifications
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Dimensions: 2.52 x 8.54 x 5.55 inches
See On Amazon #18
Garosa Frequency Test Board Demo Kit VNA Test Module Vector Network Analyzer Breadboard Test Protoboard Board Filter/Attenuator Module
Asin: B081YN3DWK | Model: Garosa812quomibr | PartNumber: Garosa812quomibr | Ean: 0738585633237 | UPC: 738585633237
【Safe And Reliable】--Each Module Is Well Selected Of High Quality And Great Reliability,Practical, Has A Long Service Life..
【Remind】Please Note That This Product Only Contains 2 Ufl Patch Cords. If You Need To Change The Connection Multiple Times, It May Cause Inconvenience. Please Purchase With Caution, Or Purchase A Ufl Patch Cord For Replacement..
【Easy To Carry】--The Board Is Small And Light ,Suitable For Carrying With.Easy To Operate And Use..
【18 Functional Modules】--The Board Is Totally Integrated With 18 Functional Modules.Can Be Used To Measure 30Mhz Short Wave Low-Pass-Filter Lpf,100Mhz Fm High-Pass Filter Hpf,433Mhz Commonly Used Saw Band Pass Filter Bpf,6.5Mhz Ceramic Trap Bsf..
Features
- Specialty --Demo Kit VNA test board demo calibration board for learning Vector Network Analyzer , Antenna Analyzer test calibration learning.
- 18 functional modules --The board is totally integrated with 18 functional modules.Can be used to measure 30MHz short wave low-pass-filter LPF,100MHz FM high-pass filter HPF,433MHz commonly used SAW band pass filter BPF,6.5MHz ceramic trap BSF.
- Safe and reliable --Each module is well selected of high quality and great reliability,practical, has a long service life.
- Easy to carry --The board is small and light ,suitable for carrying with.Easy to operate and use.
- Remind Please note that this product only contains 2 UFL Patch Cords. If you need to change the connection multiple times, it may cause inconvenience. Please purchase with caution, or purchase a ufl patch cord for replacement.
- See more on Amazon...
Brand: Garosa | Manufacturer: Garosa
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.09 Pounds
See On Amazon #19
Upgraded NanoVNA-F V2 Vector Network Analyzer 50kHz-3000MHz HF VHF UHF VNA Antenna Analyzer 4.3 inch with 5000mA-h,Measuring S-Parameter Voltage SWR, Phase, delay, Smith Chart
Asin: B0825PZNJJ
【Upgraded Aluminium Housing 】 Standard Aluminium Shell To Protect Sma Head And Reduce The Interference Of External Electromagnetic Wave To Instrument..
【Compact And Powerful】: Upgrade The User Program By Virtual U Disk.Switch To A Power Switch With A Greater Sense Of Operation And A Better Sense Of Operation.Support Chinese And English Menu Switching..
【Measurement Range】 The Nanovna-F Measurement Range Is 50K-3Ghz. You Can Go To The Official Website To Update And Expand The Frequency To 10Khz-1.5Ghz.The Harmonic Expansion Of The Output Signal Of The Clock Chip Si5351 Is Used To Measure The Frequency To 1000Mhz. At 600M-1Ghz, The Dynamic Range Of S11 Is 40Db (The Standing Wave Ratio Is Less Than 1.02)..
【Higher Capacity Battery,And Longer Standby Time】 Upgraded The Large Capacity 5000Ma-H 3.7V Battery, Longer Standby Time, And Extended Usb Interface. Typically, It Can Be Used As A Mobile Power Source To Charge Android Or Apple Phones When Not In Use. The Ic Is Charged By High Current 2A, And The Charging Time Is Shorter..
Features
- 4.3 inch Large Touch screen and powerful function Handheld Vector Network Analyzer using 4.3-inch IPS TFT LCD screen, with a larger view angle and can be seen clearly in strong outdoor light.which can measure S-parameter, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on.
- Higher Capacity Battery,and Longer Standby time Upgraded the large capacity 5000mA-h 3.7V battery, longer standby time, and extended USB interface. Typically, it can be used as a mobile power source to charge Android or Apple phones when not in use. The IC is charged by high current 2A, and the charging time is shorter.
- Upgraded Aluminium Housing Standard aluminium shell to protect SMA head and reduce the interference of external electromagnetic wave to instrument.
- Measurement Range The NanoVNA-F measurement range is 50k-3GHz. You can go to the official website to update and expand the frequency to 10Khz-1.5Ghz.The harmonic expansion of the output signal of the clock chip SI5351 is used to measure the frequency to 1000MHz. At 600M-1GHz, the dynamic range of S11 is 40dB (the standing wave ratio is less than 1.02).
- Compact and Powerful : Upgrade the user program by virtual U disk.Switch to a power switch with a greater sense of operation and a better sense of operation.Support Chinese and English menu switching.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
See On Amazon
Looking For Something Else?
Search