Best lathe turning tools - Buying Guide
Last Updated: 05/10/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
TBPA 24 Pieces Tungsten Carbide Cutters Inserts Set for Wood Lathe Turning Tools Included 11mm Square with Radius,12mm and 8.9mm Round, 30x10mm Sharp Point Diamond,12 Pieces screws
Asin: B0CBSHTVLR | Ean: 0744128390284 | UPC: 744128390284
【Beginner-Friendly】The Carbide Cutters Replacement Inserts Set Is Designed To Meet The Requirements Of Both Rough And Precision Machining. It Is Compatible With Most Carbide Wood Lathe Turning Tool And Other Related Accessories, Making It Easy To Replace Cutters. It Is Perfect For Both Experienced Carpenters And Beginners..
【Multi-Functional】The Woodturning Tools Carbide Replacement Inserts Are Easy To Clean, And Their Thoughtful Design Helps Alleviate Fatigue To Some Extent. Perfect For Hollowing, Bevelling, Shaping Curves, And Adding Decorative Details..
【How To Maintain】When The Carbide Lathe Tools Replacement Inserts Become Dull Or Perform Poorly, Simply Rotate The Tip To Get A Fresh Cutting Edge. You Can Even Sharpen Them For Repeated Use, Extending Their Lifespan..
【Sharp & Lasting】All The Carbide Inserts Cutters Knifes Blades Are Made Of High-Quality Solid Tungsten Steel, Ensuring Strength And Durability. They Are Resistant To Breaking Or Deformation And Are Polished To A Mirror-Like Finish, Providing Smooth Cutting And A Long-Lasting Performance..
Features
- Versatile Set of 12 Blades This tungsten carbide cutters inserts set includes 4 different types of carbide cutting tools to meet all your needs: 3pcs square blades (11 x 11 mm / 0.43 x 0.43 inches), 3pcs diamond blades (10 x 30 mm / 0.39 x 1.18 inches), 3pcs round blades (12 x 2.5 mm / 0.47 x 0.1 inches), and 3pcs round blades (8.9 x 1.85 mm / 0.35 x 0.07 inches). The set comes with 12 screws for easy installation.
- Sharp & Lasting All the carbide inserts cutters knifes blades are made of high-quality solid tungsten steel, ensuring strength and durability. They are resistant to breaking or deformation and are polished to a mirror-like finish, providing smooth cutting and a long-lasting performance.
- Beginner-Friendly The carbide cutters replacement inserts set is designed to meet the requirements of both rough and precision machining. It is compatible with most carbide wood lathe turning tool and other related accessories, making it easy to replace cutters. It is perfect for both experienced carpenters and beginners.
- How to Maintain When the carbide lathe tools replacement inserts become dull or perform poorly, simply rotate the tip to get a fresh cutting edge. You can even sharpen them for repeated use, extending their lifespan.
- Multi-functional The woodturning tools carbide replacement inserts are easy to clean, and their thoughtful design helps alleviate fatigue to some extent. Perfect for hollowing, bevelling, shaping curves, and adding decorative details.
- See more on Amazon...
Brand: TBPA | Manufacturer: TBPA
See On Amazon #2
SST Mini Mill & Lathe Tramming System | Remove Angular Misalignment | Squaring and Tramming Tool for Machine Calibration | High Precision .001 Dial Indicators
Asin: B084GDD7WN | Model: PARENT_Mill Tram | PartNumber: PARENT_Mill Tram | Ean: 0600139430381 | UPC: 600139430381
Superior Performance - Tightly Toleranced Indicator Holes And Coordinate Measurement Machine Verified Squareness Tramming System For Professional Quality.
Unmatched Warranty - Masterfully Machined From 6061 Aluminum With A Beautiful Hard Anodized Finish And Backed By 5 Year Sst Warranty, We Stand Behind The Quality And Accuracy Of Our Mill Tramming System (And All Our Tools At That).
Highest Accuracy Available - Two High Quality Sst Dial Indicators (.001” Graduation) Provide The Highest Resolution Measurement Of Any Misalignment Between Your Spindle And Your Cnc Bed.
Features
- CALIBRATE YOUR MACHINE - Achieve Perfect Alignment Between Your Machine and its Bed, Workpiece, or Holding Fixture! Remove Unwanted Angular Misalignment for Higher Accuracy Parts and Improved Precision.
- HIGHEST ACCURACY AVAILABLE - Two High Quality SST Dial Indicators (.001 Graduation) Provide the Highest Resolution Measurement of any Misalignment Between Your Spindle and Your CNC Bed
- SUPERIOR PERFORMANCE - Tightly Toleranced Indicator Holes and Coordinate Measurement Machine Verified Squareness Tramming System for Professional Quality
- UNMATCHED WARRANTY - Masterfully Machined from 6061 Aluminum with a Beautiful Hard Anodized Finish and Backed by 5 Year SST Warranty, We Stand Behind the Quality and Accuracy of our Mill Tramming System (and All our Tools at That)
- See more on Amazon...
Brand: Stupid Simple Tools | Manufacturer: SST Co
See On Amazon #3
BINSTAK - K1215 - 12mm Square Corners Carbide Inserts 4 Edges (12mm lengthX12mm widthX1.5mm thick-35 Degree Cutting Angle), Pack of 10, Straight-Hole
Asin: B087BDMCZ4 | Model: K1215 | PartNumber: K1215 | Ean: 0686082999793 | UPC: 686082999793
Each Blade Has 4 Sharp Edges, If One Is Dull, Just Change It To The Other Side. More Effective!.
Fits For Spiral/Helical Planer Cutter Heads, Rougher Wood Turning Tools. Replacement Carbide Tips For Cnc Router Fits Nitomak And Binstak Insert Surfacing Router Bit 3-Wing..
Ideal For Giving You A Smooth Finish On Curved, Concave Surfaces, Hollowing Jobs And For General Turning Applications. Used On Soft And Hard Woods, Particle Board, Mdf, Plywood Compact Panel, Laminate, Acrylic And Etc..
Made Of Solid Tungsten Carbide, High Strength And Hardness, Own Longer Use Life, Sharp And Durable..
Features
- 12mm*12mm*1.5mm (length*width*thick), 35 angle, Hardness: 93HRA, 4 cutting edges.
- Made of solid tungsten carbide, high strength and hardness, own longer use life, sharp and durable.
- Each blade has 4 sharp edges, if one is dull, just change it to the other side. More effective!
- Ideal for giving you a smooth finish on curved, concave surfaces, hollowing jobs and for general turning applications. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc.
- Fits for Spiral/Helical Planer Cutter Heads, Rougher Wood Turning Tools. Replacement carbide tips for CNC router fits NITOMAK and BINSTAK Insert Surfacing Router Bit 3-Wing.
- See more on Amazon...
Brand: BINSTAK | Manufacturer: BINSTAK
Weight: 0.04 pounds
See On Amazon #4
JWGJW 120034 Mini Lathe Quick Change Tool Post,Lathe Tool Holder,Axa Tool Holder
Asin: B018QMTXB0 | Model: 120034 | PartNumber: 120034 | Ean: 0703341919863, 0798154089902 | UPC: 703341919863, 798154089902
【 Scope Of Application 】 With A Dial, Each Tool Holder Can Rotate At Multiple Angles Of 9 ° Or 9 °. With The Use Of Extended Unit Operation, Various Angle Workpieces Can Be Processed, Which Can Be Used For Cylinder, Slotting, Cutting, Knurling, Drilling, Reaming, And Other Processing. Suitable For Small Lathes And Micro Lathes Such As 7X10, 7X12, 7X14, 7X16, And 9X16 "..
Note: This Tool Is Suitable For Diy Mini Lathes, Micro Lathes, And Small Lathes..
【 Product Packaging】 1X A Dovetail Tenon, 1X 3/8" Boring Bar Holder, 1X 0.2" Capacity Cut-Off Blade Holder, 2X 1/2" Turning & Facing Holders, 2X Mounting Bolts (M8 & M10), 2X Allen Key..
【 Product Quality 】: The Quick Replacement Tool Holder Is Composed Of Anodized Aluminum Oxide And Black Steel, With A Wedge-Shaped Tool Holder Design That Is Easy To Center, And All Working Parts Are Precision Ground And Hardened. The Positioning Accuracy Of The Tool Holder Replacement Is High, And The Reset Accuracy Is Within The Range Of 0.002Mm.
Features
- Product Description : This is a mini tool holder used to fix the cutting tool, which is installed on the lathe through a dovetail tenon.
- Product Quality : The quick replacement tool holder is composed of anodized aluminum oxide and black steel, with a wedge-shaped tool holder design that is easy to center, and all working parts are precision ground and hardened. The positioning accuracy of the tool holder replacement is high, and the reset accuracy is within the range of 0.002mm
- Scope of Application With a dial, each tool holder can rotate at multiple angles of 9 or 9 . With the use of extended unit operation, various angle workpieces can be processed, which can be used for cylinder, slotting, cutting, knurling, drilling, reaming, and other processing. Suitable for small lathes and micro lathes such as 7x10, 7x12, 7x14, 7x16, and 9x16 .
- Product Packaging 1x a dovetail tenon, 1x 3/8 boring bar holder, 1x 0.2 capacity cut-off blade holder, 2x 1/2 turning & facing holders, 2x Mounting bolts (M8 & M10), 2x Allen Key.
- Note: This tool is suitable for DIY mini lathes, micro lathes, and small lathes.
- See more on Amazon...
Brand: JWGJW | Manufacturer: JINWEN
Dimensions: 0.28 x 0.79 x 0.79 inches | Weight: 1.40 Pounds
See On Amazon #5
14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench
Asin: B099ZLC91K | Model: Honoson-Boring Bar-01 | PartNumber: Honoson-Boring Bar-01
Suitable Size: The Diameter Of The S07k/ S08k/ S10k Handle Is 4.92 Inches/ 125 Mm, S12m-Sclcr06 Is 5.9 Inches/ 150 Mm; Cutting Angle Is 95 Degree, Cutting Direction Is Right Hand; Applicable Machine Tool Is Lathe; Each Tool Holder Has A Black Oxidized Smooth Surface, And The Tool Hardness (Hrc Up And Down 48 Degrees) And Has Nice Accuracy.
Note: Due To The Slight Color Change Of Manual Measurement And Different Display Settings, Please Allow A Difference Of 1-3 Cm; Due To The Difference Between Different Monitors, The Picture May Not Reflect The Actual Color Of The Item.
Easy To Store: Insert 10 Pieces Of Cemented Carbide Into A Boxes, And Put Them In A Plastic Container, Safe And Easy To Store, Compatible With Sclcr06 Lathe Boring Bar Turning Tools Holders; Tight Impact Bolts, Simple Structure, Often Applied For Small Hole Processing.
Quality Material: Lathe Boring Bar Turning Tools Holder Are Made Of Quality Cemented Carbide And Tungsten Steel; The Cemented Carbide Material Makes The Turning Tool Durable And Adaptable; Indexable Carbide Turning Insert Blades Are Made Of Cemented Carbide And Use Pvd Coating, The Blade Is Sturdy, Low Friction Coefficient, Wear-Proof And Stable.
Features
- Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace
- Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel; The cemented carbide material makes the turning tool durable and adaptable; Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable
- Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm; cutting angle is 95 degree, cutting direction is right hand; Applicable machine tool is lathe; Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy
- Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders; Tight impact bolts, simple structure, often applied for small hole processing
- Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm; Due to the difference between different monitors, the picture may not reflect the actual color of the item
- See more on Amazon...
Brand: Honoson | Manufacturer: Honoson
See On Amazon #6
Vevor Lathe Chisel 8 Piece Wood Lathe Chisel Cutting Carving HSS Steel Blades Wood Turning Tools Lathe Chisel Set Wooden Case for Storage for Wood Turning Hardwood One Free Chisel - Amazon.com
Asin: B07YDSXWTY | Model: Lathe Chisel 8 Piece Wood Lathe Chisel | PartNumber: Lathe Chisel 8 Piece Wood Lathe Chisel | Ean: 0768558006249 | UPC: 768558006249
【Safe Brass Ferrules】- High Speed Steel Blades Are Tightly Connected To The Handle By Durable Brass Ferrules, Easuring Chisels' Safety And Reliability While Working..
【Attractive Wood Tool Box】- A Wooden Case For Easy Storage And Transportation. Compact Design. Foam Bases To Protect Wood Chisel Sets From Any Damage. .
【Reliable & Sturdy】- Solid Wood Material Handles. Ergonomics Design Offers It More Comfortable While Doing Turning Job. Each Tool Handle Is Beautifully Turned Hardwood That Are Approximately 9.06"(23Cm) Long..
【8 Pcs Chisels Set】- Chisels Range In Overall Length Is About 16.14" (41Cm). The Lathe Tools Includes 8 Essential Chisels: 1X Inch Parting Tool, 1X Spear Scraper, 1X Skew Chisel, 1X Inch Skew Chisel, 1X Inch Round Nose Scraper, 1X Inch Bowl Gouge, 1X Inch Spindle Gouge, 1X Inch Roughing Gouge. One Free 5/8" Chisel For You..
Features
- SOLID BLADES DESIGN - The lathe chisels are made from high speed steel, featuring shrill edge and fine grinding. Durable and accurate design. Blades is about about 6.50" (16.5cm).
- 8 PCS CHISELS SET - Chisels range in overall length is about 16.14 (41cm). The lathe tools includes 8 essential chisels: 1x inch parting tool, 1x spear scraper, 1x skew chisel, 1x inch skew chisel, 1x inch round nose scraper, 1x inch bowl gouge, 1x inch spindle gouge, 1x inch roughing gouge. One free 5/8 chisel for you.
- SAFE BRASS FERRULES - High speed steel blades are tightly connected to the handle by durable brass ferrules, easuring chisels' safety and reliability while working.
- RELIABLE & STURDY - Solid wood material handles. Ergonomics design offers it more comfortable while doing turning job. Each tool handle is beautifully turned hardwood that are approximately 9.06(23cm) long.
- ATTRACTIVE WOOD TOOL BOX - A wooden case for easy storage and transportation. Compact design. Foam bases to protect wood chisel sets from any damage.
- See more on Amazon...
Brand: Vevor | Manufacturer: Mophorn
Dimensions: 2.40 x 18.90 x 13.00 inches | Weight: 7.00 pounds
See On Amazon #7
Peachtree Woodworking Supply Pro Grind Sharpening System for 8 Inch Grinders to Sharpen Lathe Turning Tools, Chisels, Skews, Bowl Spindle Gouges Includes Setup Blocks and Quad Jig for 8 inch Grinders
Asin: B01HDEJGLE | Model: 7575 | PartNumber: 7575 | Ean: 0814310018552 | UPC: 814310018552
The Pro Grind Tool Rest Bar Attachment Offers You The Best Possible Way To Achieve A Precise Edge To Your Bevels Without Taking Of Too Much Material Off Of Your Tool. After All, We Need Our Tools To Last A Long Time, So Why Would You Want To Take Off To Much At A Time? The Tool Rest Bar Is Ideal For Sharpening Curved, Even Bevel Edges That Are Typically Used On Spindle And Roughing Gouges..
The Pro Grind Sharpening System Also Comes With A Number Of Setup Jigs And Accessories To Help In The Setup Process To Sharpen Your Tools To The Proper And Repeatable Angles. From The Built-In Projection Gauge On The Multi-Grind Arm To The Magnetic Micro Bevel Setup Block You’Ll Be Able To Achieve Consistent Repeatable Angles And Produce Excellent Results Each And Every Time You Use The Pro Grind Sharpening Jig System..
The Large, 3” X 5” Slotted Platform Is The Ideal Way To Sharpen Flat Edged Tools Like Wood Turning Skews, Chisels And Hand Plane Irons. The Platform Has A Slot Milled Horizontally Through It So It Can Accept The Included Tool Holder. The Tool Holder Is Designed To Keep Your Tools At The Correct Angle While Being Able To Slide Side To Side During The Sharpening Process..
The Included And Versatile Multi-Grind Jig Will Correctly Shape The Edge On Bowl Gouges, Side Grinds (Aka Ellsworth Grind, Liam O’Neil Grind/Irish Grind) Or Fingernail Grinds For Spindle Work And Detailing. Not Only Will It Correctly Shape Your Tools, You Will Also Be Able To Repeat The Process To Produce Consistent Results Every Time. The Multi-Grind Jig Is Designed To Be Used With The Included Multi-Grind Arm On The Pro Grind Sharpening System And Will Accept Tools Up To 1.125” In Diameter..
Features
- Sharpen chisels, gouges, bowl gouges, spindle gouges, carving tools, wood turning scrapers, parting tools, block plane irons and more with the PRO GRIND Sharpening System! With 3 primary methods of sharpening, you ll be able to precisely hone each tool to your exacting specifications regardless of the tool you are sharpening. The PRO GRIND Sharpening System includes a vast collection of unique setup tools, jigs and accessories that most sharpening systems force you to purchase separately
- The included and versatile Multi-Grind Jig will correctly shape the edge on bowl gouges, side grinds (aka Ellsworth grind, Liam O Neil grind/Irish grind) or fingernail grinds for spindle work and detailing. Not only will it correctly shape your tools, you will also be able to repeat the process to produce consistent results every time. The Multi-Grind Jig is designed to be used with the included Multi-Grind arm on the PRO GRIND Sharpening System and will accept tools up to 1.125 in diameter.
- The PRO GRIND Tool Rest Bar attachment offers you the best possible way to achieve a precise edge to your bevels without taking of too much material off of your tool. After all, we need our tools to last a long time, so why would you want to take off to much at a time? The Tool Rest Bar is ideal for sharpening curved, even bevel edges that are typically used on spindle and roughing gouges.
- The large, 3 x 5 slotted platform is the ideal way to sharpen flat edged tools like wood turning skews, chisels and hand plane irons. The platform has a slot milled horizontally through it so it can accept the included tool holder. The tool holder is designed to keep your tools at the correct angle while being able to slide side to side during the sharpening process.
- The PRO GRIND Sharpening System also comes with a number of setup jigs and accessories to help in the setup process to sharpen your tools to the proper and repeatable angles. From the built-in projection gauge on the Multi-Grind arm to the Magnetic Micro Bevel setup block you ll be able to achieve consistent repeatable angles and produce excellent results each and every time you use the PRO GRIND Sharpening Jig system.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply
Dimensions: 30.00 x 9.00 x 4.00 inches
See On Amazon #8
ARBORTECH Ball Gouge | 30 mm Spherical Shaped Wood Gouge Power Carving Attachment for Angle Grinder | BAL.FG.2000
Asin: B0752TXPKD | Model: BAL.FG.2000 | PartNumber: BAL.FG.2000 | Ean: 0093988565487, 4251128799765, 9313478340013 | UPC: 093988565487
Target Group | The 30 Mm Diameter Ball-Shaped Wood Cutter Is Ideal For Carving Smooth Hollows In Wooden Spoons, Small Bowls And Is Useful For Small To Medium Sculpting.
Included | In Addition To The Cutter Attachment For Angle Grinders, An Allen Key Is Included.
Tools | The Grinding Tool Fits Most Standard 4-4.5″ Angle Grinders With A 5/8" Spindle And Can Handle Up To A Speed Of 12,000 Rpm – Making It The Most Efficient And High Performance Wood Tool Of It’S Caliber On The Market.
Quality | The Ball Gouge Has A Revolutionary, Ring Shaped Blade That Is Self Sharpening, Rotatable And Replaceable To Provide Optimal Value And Durability And Features Anti-Grab Technology, Which Helps Prevent The Tool From Digging.
Features
- PERFORMANCE | The Arbortech Ball Gouge is a spherical shaped wood carving tool that can rapidly hollow small concave surfaces in woodworking projects
- QUALITY | The Ball Gouge has a revolutionary, ring shaped blade that is self sharpening, rotatable AND replaceable to provide optimal value and durability and features Anti-Grab Technology, which helps prevent the tool from digging
- TARGET GROUP | The 30 mm diameter ball-shaped wood cutter is ideal for carving smooth hollows in wooden spoons, small bowls and is useful for small to medium sculpting
- TOOLS | The grinding tool fits most standard 4-4.5 angle grinders with a 5/8 spindle and can handle up to a speed of 12,000 RPM making it the most efficient and high performance wood tool of it s caliber on the market
- INCLUDED | In addition to the cutter attachment for angle grinders, an Allen Key is included
- See more on Amazon...
Brand: Arbortech | Manufacturer: Arbortech
Dimensions: 1.40 x 9.75 x 4.05 inches | Weight: 0.55 Pounds
See On Amazon #9
VINWOX 8 PCS Carbide Wood Lathe Turning Tool Set, Carbide Lathe Turning Tool, Including Swan Neck Hollower, Rougher, Finisher, Detailer, Pen Turning tools, Aluminum Alloy Handles from 14" to 29"
Asin: B0CG61QPF3 | Model: wood chisel-4pcs ALU Handle | PartNumber: wood chisel-4pcs ALU Handle | Ean: 0769293700683 | UPC: 769293700683
✅The Length Of The Shank Inserted Into The Handle Is Adjustable According To Your Need On Turning Reach..
✅Simply More Turning & Long Lasting, Say Good-Bye To Sharpening Tools. Top Quality And Long Cutting Life Guaranteed..
✅Detailer With 28X10mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Make Final Touch On Small Beads Or Coves, Terrific On Chuck Tenons..
✅Including One Set Carbide Tip Insert Installed On Chisel..
✅Square Rougher With 11X11x2mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Removes Bulk Fast And Efficiently, Terrific On Cutting Hard Materials..
✅Round Finisher With Ø12 Mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Make Finishing Fast And Efficiently, Terrific Scraping Workout..
✅Swan Neck Hollower With Ø9x1.8Mm Carbide Tip And 3/4”X3/8” (19X10mm) Thick Polished Solid Swan Neck Toolbar Features With Sturdy Turning Feeling Whenever You Start Turning, Perfect Turning On All Inside Holes! Remember 29” Extra Long Handle Is Important On Hollowing Projects..
✅Two Pieces Aluminum Alloy Handles, The Normal Rod Connected To The Carbide Toolbar, The Extended Rod Can Be Screwed Onto The Normal Rod, Flexible Tool Length From 14“ To 29”.
✅All Tool Bars, From 3/4”X3/8” Swan Neck Toolbar To 3/8”X3/8” Regular Rougher/Finisher/Detailer Toolbars Are Fully Polished For Most Smooth Sliding On Tool Rest For Each Workpiece..
Features
- The VINWOX Carbide Turning Tools are Designed with Ease of Use in Mind. It is Ideal for Wood Turners of All Skill Levels and Helps Ensure Success Right From the Start. The VINWOX Carbide Turning Tools Eliminate the Need for Sharpening of Your Turning Tools Since It Features a Rotatable Cutter Head.
- All Tool Bars, from 3/4 x3/8 Swan Neck Toolbar to 3/8 x3/8 Regular Rougher/Finisher/Detailer Toolbars are Fully Polished for Most Smooth Sliding on Tool Rest for Each Workpiece.
- The Length of the Shank Inserted into the Handle is Adjustable According to Your Need on Turning Reach.
- SWAN NECK HOLLOWER with 9x1.8mm Carbide Tip and 3/4 x3/8 (19x10mm) Thick Polished Solid Swan Neck Toolbar Features with Sturdy Turning Feeling Whenever You Start Turning, Perfect Turning on All Inside Holes! Remember 29 Extra Long Handle is Important on Hollowing Projects.
- SQUARE ROUGHER with 11x11x2mm Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Removes Bulk Fast and Efficiently, Terrific on Cutting Hard Materials.
- ROUND FINISHER with 12 MM Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Make Finishing Fast and Efficiently, Terrific Scraping Workout.
- DETAILER with 28x10mm Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Make Final Touch on Small Beads or Coves, Terrific on Chuck Tenons.
- Including One Set Carbide Tip Insert Installed on Chisel.
- Two Pieces Aluminum Alloy Handles, the Normal Rod Connected to the Carbide Toolbar, the Extended Rod Can Be Screwed onto the Normal Rod, Flexible Tool Length from 14 to 29
- Simply More Turning & Long Lasting, SAY Good-bye to Sharpening tools. Top quality and Long cutting life Guaranteed.
- See more on Amazon...
Brand: VINWOX | Manufacturer: VINWOX
See On Amazon #10
WenCrew Carbide Tipped Wood Turning Tools Set, 2023 Upgrade Carbide Lathe Tools for Woodturning, Lathe Rougher Finisher Swan Neck Hollowing Tools with Extendable Shafts
Asin: B0BG4QT947 | Model: carbide lathe tools-01 | PartNumber: carbide lathe tools-01
▶▶▶ Simple Operateion : Carbide Wood Turning Tools Allow Both Beginner And Experienced Turners To Quickly Start Projects By Reducing The Learning Curve Associated With Traditional Turning Tools. And Our Wood Lathe Tools Bring You Outstanding Results, Ideal For Lathe Woodworking Or Diy Enthusiasts.
▶▶▶ Delicate & Portable Case: Convenient Storage And Carry. You Will Get 1* 11Inch Length Aluminum Lathe Tools Handle+ 1* 10Inch Length Handle Extension + 4* Carbide Tips +2*Tools; (4 Tips Included Round + Diamond+ Square + Hollower, 2 Tools Included T15 Wrench And Allen Wrench).
▶▶▶ Note: This Is A Handle + An Extension Rod, Not 2 Handles, If You Need Additional Replacable Handles Or Tips, Please Check The Accessory Variant Link, All Of Them Can Be Sold Separately, If You Couldn't Find The Relevant Link, Please Email Directly To Our Customer Service Staff, We Will Send The Asin To You.
▶▶▶ Fast Handle Switching: Excellent Reliable Ergonomics Grip Makes You Feel Comfortable And Light. Adjustable And Extendable Handle Support Freely Adjust The Length According To Your Preference. Wood Turning Tools Equipped With Tools To Adjust And Extend The Length, Easy And Flexible To Assemble And Disassemble.
▶▶▶ High Stability: High Performance Stainless Steel Arbor And Aluminum Oxide Handles Increase Stability And Shock Resistance. Better Shock Resistant Wood Turning Tools Will Ensure The Handle Will Not Loosen When Vibrating, Which Will Make You Get A Good Cutting Effect In Safe Operation(Heavy Duty Wood Turning Tools For Lathe Are Less Likely To Roll And Move On The Tool Holder Than Wood Tools).
Features
- SAY GOODBYE TO SHARPENING ANNOYANCE: Upgrade premium carbide lathe tools are made with Rotatable tungsten carbide tip with sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge. Sharper & Luster Cutter can offer better strength and durability to helps maintain edge persistence, to avoid constant sharpening.
- HIGH STABILITY: High performance stainless steel arbor and aluminum oxide handles increase stability and shock resistance. Better shock resistant wood turning tools will ensure the handle will not loosen when vibrating, which will make you get a good cutting effect in safe operation(Heavy duty wood turning tools for lathe are less likely to roll and move on the tool holder than wood tools)
- SIMPLE OPERATEION : Carbide wood turning tools allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools. And our wood lathe tools bring you outstanding results, Ideal for lathe woodworking or DIY enthusiasts
- FAST HANDLE SWITCHING: Excellent reliable ergonomics grip makes you feel comfortable and light. Adjustable and Extendable handle support freely adjust the length according to your preference. Wood turning tools equipped with tools to adjust and extend the length, easy and flexible to assemble and disassemble
- DELICATE & PORTABLE CASE: Convenient storage and carry. You will get 1* 11inch Length Aluminum lathe tools handle+ 1* 10inch Length Handle Extension + 4* Carbide Tips +2*Tools; (4 Tips included round + diamond+ square + hollower, 2 Tools included T15 wrench and allen wrench)
- NOTE: This is a handle + an extension rod, not 2 handles, if you need additional replacable handles or tips, please check the accessory variant link, all of them can be sold separately, if you couldn't find the relevant link, please email directly to our customer service staff, we will send the asin to you
- See more on Amazon...
Brand: WenCrew | Manufacturer: WenCrew
Dimensions: 0.10 x 5.00 x 2.00 inches
See On Amazon #11
Wheel Marking Gauge Kit - 2 Extra Cutter Wheels, Roll Stop Head, Micro Adjuster, Metric Imperial Ruler, 7'' Brass Marker Tool for Woodwork
Asin: B07B8RX4NB | Model: 43237-2 | PartNumber: 43237-2 | Ean: 0670875893412 | UPC: 670875893412
👍 Fine Cutting Wheel Adjustments - The Marking Gauge Wheel Is Fitted With A Micro-Adjustable Fence With 2 Thumbscrews, Which Will Make It Easier For You To Take Measurements With Pinpoint Accuracy..
👍 Easy To Set - The Marking Tool Is Fitted With Sturdy Knobs That Ensure Easy Adjustments. The Rod Features A V-Shaped Slot That Prevents The Fence And Tail From Wiggling Or Wobbling During Use..
👍 Anti-Roll Design - Keep This Wheel Marking Gauge From Rolling Off Of Your Work Bench. It Houses An Anti-Roll Brass Fence With 2 Flat Spots On The Head To Keep The Gauge From Rolling Around..
👍 Ready For Everyday Use - Unlike Other Gauges That Easily Warp Or Break, This Marking Wheel Gauge Is Built To Last A Lifetime, Thanks To Its Solid Brass Body And Hardened Steel Cutter..
Features
- PATENT PENDING - MAKE ACCURATE MARKINGS - To ensure precise markings, this brass wheel marking gauge features an engraved graduated ruler, which shows both metric and imperial measurement values.
- READY FOR EVERYDAY USE - Unlike other gauges that easily warp or break, this marking wheel gauge is built to last a lifetime, thanks to its solid brass body and hardened steel cutter.
- FINE CUTTING WHEEL ADJUSTMENTS - The marking gauge wheel is fitted with a micro-adjustable fence with 2 thumbscrews, which will make it easier for you to take measurements with pinpoint accuracy.
- ANTI-ROLL DESIGN - Keep this wheel marking gauge from rolling off of your work bench. It houses an anti-roll brass fence with 2 flat spots on the head to keep the gauge from rolling around.
- EASY TO SET - The marking tool is fitted with sturdy knobs that ensure easy adjustments. The rod features a V-shaped slot that prevents the fence and tail from wiggling or wobbling during use.
- See more on Amazon...
Brand: Clarke Brothers | Manufacturer: Clarke Brothers
See On Amazon #12
Diraeen 35Pcs Tungsten Carbide Cutters Inserts Set,Lathe Tools for Wood Lathe Turning Tools,Supplied with Screws and Screwdriver
Asin: B0C56QRJTB | Model: 35PCS | PartNumber: 35PCS
【3 Screwdrivers And 16 Screws】 The Tungsten Cutting Tool Blade Comes With Multiple Screwdrivers And Screws. Fully Equipped And Easy To Replace.
【High-Quality After-Sales Service】If You Are Not Satisfied With The Product At Any Time Within 1 Years After Purchase, We Will Provide A Refund Or Replacement. Package Included: 4*Square (11 X 11 Mm), 4*Diamond (30 X 10 Mm), 4* Round (Diameter 12 X 2.5 Mm) , 4*Round (Diameter 8.9 X 1.85 Mm), 16* Screws, 3*Screwdriver.
【Fits For Wood Lathe Turning Tools】This Combination Carbide Insert Kit Works Perfectly With Our Wood Lathe Turning Tools Kit.Meet The Requirements Of Rough Machining And Finishing Combination.
【Solid Tungsten Steel】All Of The Carbide Lathe Tools Replacement Inserts Are Made Of Quality Solid Tungsten Steel. Super Sharp And Durable, Long Lasting And Reliable, Hard To Break Or Deform, Providing You With Nice Use Experiences For A Long Time.
Features
- Carbide Lathe Tools Replacement Tips with Screws and Screwdriver Fits For Most Size 11 mm Square with Radius, 12 mm and 8.9 mm Round, 30 x 10 mm Diamond
- Solid Tungsten Steel All of the carbide lathe tools replacement inserts are made of quality solid tungsten steel. Super sharp and durable, long lasting and reliable, hard to break or deform, providing you with nice use experiences for a long time
- 3 screwdrivers and 16 screws The tungsten cutting tool blade comes with multiple screwdrivers and screws. Fully equipped and easy to replace
- Fits for wood lathe turning tools This combination carbide insert kit works perfectly with our wood lathe turning tools kit.Meet the requirements of rough machining and finishing combination
- High-quality after-sales service If you are not satisfied with the product at any time within 1 years after purchase, we will provide a refund or replacement. Package included: 4*Square (11 x 11 mm), 4*Diamond (30 x 10 mm), 4* Round (diameter 12 x 2.5 mm) , 4*Round (diameter 8.9 x 1.85 mm), 16* Screws, 3*Screwdriver
- See more on Amazon...
Brand: Diraeen | Manufacturer: DIRAEEN
See On Amazon #13
HAUTMEC Professional Wood Turning Chisel 8 pcs Set, Lathe Chisel Set with 2 Skew 1 Spear Point 1 Parting 1 Round Nose & 3 Gouge Tools for Beginners, Hobbyists and Professionals HT0237-WW
Asin: B0BSGCWT6W | Model: HT0237-WW | PartNumber: HT0237-WW
Detailed Design - Light, Very Sharp, And Responsive, The Tools Are Already Sharpened And Can Be Used Immediately When You Get, No Need Further Sharpening; Durable Metal Ferrules Tighten The Handle For Stable Use Experience, Easuring Chisels' Safety And Reliability While Working. ".
Sturdy Handle - Shaped To Minimize Operator Fatigue, High Quality Hardwood Handles Make It Comfortable And Convenient For You To Hand The Chisel.
Premium Material - Made From High-Quality Triple Tempered Chromium-Vanadium Steel And Hardened To Last Long, Allowing You To Have Smooth And Sharp Carving Experience; Ground Tips For Precision Turning.
What's Included: 2-Skew: 1"", 1/2"" , 1-Spear Point: 1/2"" , 1-Parting Tool: 1/8"" , 1-Round Nose: 1/2"" , 3-Gouge: 1/4"", 1/2"", 3/4"" ".
Features
- Professional Application - This 8 pcs wood lathe chisel set is designed for turners in cutting and woodworking projects as well as hobbyists or handy men. This portable set is suitable for carving intricate details into wood pieces or chiseling runners for you furniture pieces
- What's included: 2-Skew: 1, 1/2 , 1-Spear Point: 1/2 , 1-Parting Tool: 1/8 , 1-Round Nose: 1/2 , 3-Gouge: 1/4, 1/2, 3/4
- Detailed Design - Light, very sharp, and responsive, the tools are already sharpened and can be used immediately when you get, no need further sharpening; durable metal ferrules tighten the handle for stable use experience, easuring chisels' safety and reliability while working.
- Premium Material - Made from high-quality triple tempered chromium-vanadium steel and hardened to last long, allowing you to have smooth and sharp carving experience; ground tips for precision turning
- Sturdy Handle - Shaped to minimize operator fatigue, high quality hardwood handles make it comfortable and convenient for you to hand the chisel
- See more on Amazon...
Brand: HAUTMEC | Manufacturer: SUOBO TOOLS
Dimensions: 0.10 x 14.17 x 1.02 inches
See On Amazon #14
LYMMIYTC 1/2" 12mm Indexable Lathe Turning Tool 14Pcs Kit- 4Pcs Metal Lathe Tools Holder Set with 10Pcs CCMT09T304 Carbide Insert for Turning S12M-SCLCR09/SCMCN1212H09/SCLCL1212H09/SCLCR1212H09
Asin: B0CQXDRQ4G | Model: S12M-SCLCR09 | PartNumber: S12M-SCLCR09 | Ean: 0756593187788 | UPC: 756593187788
Excellent Materials:The Turning Holders Is Made Of High-Quality 40Cr Steel And Is Coated With Anti-Rust Oil. It Has Excellent Hardness And Speed, And Is Durable, Eliminating The Trouble Of Frequent Tool Replacement..
The Turning Tool Holders Adopts A Detachable Inserts Design, Making Inserts Replacement More Convenient And Faster.We Provide 24H Support, 3Months Refund, 360Days Warranty. Don't Hesitate–Get Yours Now!.
Versatile Inserts:Our Carbide Inserts Are Cvd Coated. Strong And Sharp, With Excellent Cutting Performance And Chip Removal Effect. Suitable For Stainless Steel, Steel, Cast Iron, Etc..
Package Include:4Pcs 1/2" 12Mm Metal Lathe Tools Holders, 10Pcs Carbide Inserts And 4Pcs Matched Wrenches.Whether You Are A Professional Or A Diy Enthusiast, Our Products Are Your Reliable Assistants..
Features
- All-in-One Kit:Our Indexable Lathe Turning Tool Set have 4Pcs different angled tool holders:S12M-SCLCR09/SCMCN1212H09/SCLCL1212H09/SCLCR1212H09.You can easily choose the right tool for any project.
- Package include:4pcs 1/2 12mm metal lathe tools holders, 10pcs carbide inserts and 4pcs matched wrenches.Whether you are a professional or a DIY enthusiast, our products are your reliable assistants.
- Excellent materials:The turning holders is made of high-quality 40Cr steel and is coated with anti-rust oil. It has excellent hardness and speed, and is durable, eliminating the trouble of frequent tool replacement.
- Versatile Inserts:Our carbide inserts are CVD coated. Strong and sharp, with excellent cutting performance and chip removal effect. Suitable for stainless steel, steel, cast iron, etc.
- The turning tool holders adopts a detachable inserts design, making inserts replacement more convenient and faster.We provide 24h support, 3months refund, 360days warranty. Don't hesitate get yours now!
- See more on Amazon...
Brand: LYMMIYTC | Manufacturer: LYMMIYTC
See On Amazon #15
Tondiamo Pen Making Kit Pen Turning Mandrel and Pen Barrel Trimming Set Wood Turning Mandrel #2 Morse Taper Shank with 7mm Drill Bit Mill Cutter Head for Pen Making Woodworking Lathe Accessory, 9 pcs
Asin: B09NVRTVLW
Suitable Size: The Pilot Shafts Contain The Sizes Of 0.28 Inch, 0.32 Inch, 0.37 Inch, 0.39 Inches In Diameter; The Cutting Head Measures About 0.75 Inches In External Diameter And 0.24 Inches In Inner Diameter, And The "O" Style Sleeve Adapter Fits Pilot Shaft Over 7 Mm To Keep It In The Center Position; Wood Turning Pen Mandrel Is 7.95 Inches In Total Length, 0.24 Inches In Diameter, Which Is Acceptable For Most Kits, Can Be Applied For Most Lathes.
Practical Pen Making Kit: This Set Provides Practical And Convenient Tools For Your Pen Blank Preparation Process, The Cutting Shafts Can Easily Clean And Remove The Extra Glue, Bits Of Wood, Impurities And More, From The Tubes And Make The Tube Cut Flatter; Pen Turning Accessory Is Equipped With A Bushing That Can Protect The Mandrel From Scratches.
Quality Material: The Cutter Shafts Are Made Of Solid Carbon Steel, Which Is Rust Resistant, Sturdy, And Durable, And The Sleeve Adapter Is Made Of Brass; The Mandrel For The Lathe Is Made Of Quality Steel Material, Tough And Sturdy, Wear Resistant And High Temperature Resistant, Which Can Help To Reduce Vibration Encountered When Rotating.
Pen Turning Mandrel: The Lathe Mandrel Is Designed For Producing Pens, Including A Useful Woodworking Pen Mandrel Saver. Easy To Set Up, Tightening The Tail Stock Locks The Mandrel, Which Can Reduce The Off Center Turning, The Length Of The Shaft Can Be Adjusted At Will Via Loosening The Lock Nut At The Head Stock End, Which Can Also Help You To Improve Work Efficiency.
Features
- Pen Barrel Trimming System: includes 4 pieces of pilot cutter shafts in different sizes, 1 cutting head, 1 sleeve adapter, and 1 hex key wrench, suitable for mounting into a drill chuck, lathe chuck, drill press, or hand drill, and they are helpful to polish, mill the hole and clean the inner tube with the tiny size
- Pen Turning Mandrel: the lathe mandrel is designed for producing pens, including a useful woodworking pen mandrel saver. Easy to set up, tightening the tail stock locks the mandrel, which can reduce the off center turning, the length of the shaft can be adjusted at will via loosening the lock nut at the head stock end, which can also help you to improve work efficiency
- Suitable Size: the pilot shafts contain the sizes of 0.28 inch, 0.32 inch, 0.37 inch, 0.39 inches in diameter; The cutting head measures about 0.75 inches in external diameter and 0.24 inches in inner diameter, and the O style sleeve adapter fits pilot shaft over 7 mm to keep it in the center position; Wood turning pen mandrel is 7.95 inches in total length, 0.24 inches in diameter, which is acceptable for most kits, can be applied for most lathes
- Quality Material: the cutter shafts are made of solid carbon steel, which is rust resistant, sturdy, and durable, and the sleeve adapter is made of brass; The mandrel for the lathe is made of quality steel material, tough and sturdy, wear resistant and high temperature resistant, which can help to reduce vibration encountered when rotating
- Practical Pen Making Kit: this set provides practical and convenient tools for your pen blank preparation process, the cutting shafts can easily clean and remove the extra glue, bits of wood, impurities and more, from the tubes and make the tube cut flatter; Pen turning accessory is equipped with a bushing that can protect the mandrel from scratches
- See more on Amazon...
Brand: Tondiamo | Manufacturer: Tondiamo
See On Amazon #16
250-001 Tool 250-001 New 250-001 Cnc Lathe Tool Holder Quick
Asin: B0CPPXB711 | Model: 250-001 | PartNumber: 250-001
淬火工艺，精度好，耐磨耐用 New Black Steel Quick Change Turning Boring And Facing Post Holder Fit For Cnc Lathe Tool 250-001 ------------------ Feature: 1) 100% New With Good Quality. 2) Quick Change Turning And Facing Lathes Tool Post Holder. 3) Securely Holds Up To 1/2" Square Diameter Tool Bits. 4) For Use With Oxa Tool Posts 250-000. 6-8" Swing. 7) Turning And Facing Tools Can Be Locked Together (Saving Time And Labor When Changing Operations). 8) Quickly And Easily Installed On An Engine, Bench Or Turret Lathe For A Wide Range Of Operations, From Fine Precise Work To Heavy Duty Cutting. Dear Friend, Choosing Us Is Your Wise Decision. Welcome, My Friend!.
250-001 Oxa #1 快速更换车削和面向车床工具柱支架替换件 适用于车床.
250-001Tool 适合在250-000和250-Fx000反向刀架体上 New Black Steel Quick Change Turning Boring And Facing Post Holder Fit For Cnc Lathe Feature: New Black Steel Quick Change Turning Boring And Facing Post Holder Fit For Cnc Lathe Tool 250-001 Feature: 1) 100% New With Good Quality. 2) Quick Change Turning And Facing Lathes Tool Post Holder. 3) Securely Holds Up To 1/2" Square Diameter Tool Bits. 4) For Use With Oxa Tool Posts 250-000. 6-8" Swing. 5) Precision Ground And Hardened. Completely Sealed For Maintenance Free Operation. 6) Speed Lathe Operations 90%. 7) Turning And Facing Tools Can Be Locked Together (Saving Time And Labor When Changing Operations)..
Features
- New Black Steel Quick Change Turning Boring And Facing Post Holder Fit for CNC Lathe Tool 250-001
- 250-001Tool 250-000 250-FX000 New Black Steel Quick Change Turning Boring And Facing Post Holder Fit for CNC Lathe Feature: New Black Steel Quick Change Turning Boring And Facing Post Holder Fit for CNC Lathe Tool 250-001 Feature: 1) 100% new with good quality. 2) Quick Change Turning and Facing Lathes Tool Post Holder. 3) Securely holds up to 1/2 square diameter tool bits. 4) For use with OXA tool posts 250-000. 6-8 swing. 5) Precision ground and hardened. Completely sealed for maintenance free operation. 6) Speed lathe operations 90%. 7) Turning and facing tools can be locked together (saving time and labor when changing operations).
- New Black Steel Quick Change Turning Boring And Facing Post Holder Fit for CNC Lathe Tool 250-001 ------------------ Feature: 1) 100% new with good quality. 2) Quick Change Turning and Facing Lathes Tool Post Holder. 3) Securely holds up to 1/2 square diameter tool bits. 4) For use with OXA tool posts 250-000. 6-8 swing. 7) Turning and facing tools can be locked together (saving time and labor when changing operations). 8) Quickly and easily installed on an engine, bench or turret lathe for a wide range of operations, from fine precise work to heavy duty cutting. Dear friend, choosing us is your wise decision. Welcome, my friend!
- 250-001 OXA #1
- See more on Amazon...
Brand: Generic | Manufacturer: dezhou da mai
See On Amazon #17
16Pcs Tungsten Carbide Cutters Inserts Set for Wood Lathe Turning Tools(Include 11mm Square with Radius,12mm and 8.9mm Round,30x10mm Diamond with Sharp Point),Supplied with Screws
Asin: B0BZXDDCSK | Model: Mugongju | PartNumber: Mugongju
Functions: The Cutter Inserts Replacements Are Easy To Clean, Thoughtful Design Will Relieve Your Fatigue To Some Extent, Comfortable To Use, Ideal For Hollowing Out, Trimming Curve Surface And Decorating Some Details..
It Fits Aogbra 6Pcs Woodturning Tools Or Other Similiar Brand Tools.Easy To Replace Your Jointers And Planers..
4 Different Carbide Cutters Satisfy All You Demand: Square With Square(11*11Mm),Diamond Shaped (10Mm*30Mm),2Pcs Round (Ø12mm*2.5Mm) And (Ø8.9Mm*1.85Mm)..
Material: The Cutter Inserts For Wood Lathe Turning Tools Are Made Of Quality Tungsten Steel Material, Solid And Sturdy, Long Lasting And Reliable, Hard To Break Or Deform, Providing You With Nice Use Experiences For A Long Time..
Features
- Suitable for Wood Turning Lover: the tungsten carbide cutter inserts are considerate combination sets for meeting the requirements of rough machining and finishing combination, compatible with wood turning tools and other related accessories, nicely matched, easy to replace wood jointers and planers, very suitable for experienced carpenters as well as beginners.
- Material: the cutter inserts for wood lathe turning tools are made of quality tungsten steel material, solid and sturdy, long lasting and reliable, hard to break or deform, providing you with nice use experiences for a long time.
- Functions: the cutter inserts replacements are easy to clean, thoughtful design will relieve your fatigue to some extent, comfortable to use, ideal for hollowing out, trimming curve surface and decorating some details.
- 4 Different Carbide Cutters Satisfy all You Demand: Square With Square(11*11mm),Diamond Shaped (10mm*30mm),2pcs Round ( 12mm*2.5mm) and ( 8.9mm*1.85mm).
- It fits Aogbra 6pcs woodturning tools or other similiar brand tools.easy to replace your jointers and planers.
- See more on Amazon...
Brand: Aogbra | Manufacturer: Aogbra
See On Amazon #18
Carbide Lathe Tools, Wood Lathe Tools with Removable Handle, Latest Upgraded Turning Tool with Adjustable Connector including Swan Neck Hollower, Rougher, Finisher(Alloy Tool Set) Black
Asin: B09WTK9N39 | Model: Feotvo03 | PartNumber: Feotvo03 | Ean: 0726189482900 | UPC: 726189482900
【Indexable Cutter Design 】Indexable Carbide Cutter Inserts Can Be Rotated Or Replaced ,Once The Edge Is Blunt, You Can Always Rotate The Cutter Head To Get A New Sharper Edge..
【0Ur Turning System Includes】 Roughing Tool*1, Finishing Tool*1, Detailer Tool*1, Gooseneck Hollower Tool*1,11-Inch Handles*2, Aluminum Alloy Handle Connector*1, 2 T15 Wrenches, All In One In Aluminum Alloy Display Box..
【Versatile And Beautiful】Utility Turning Tools For Bowl Gouge Turning Pens Pepper Mills Spindles And Lots More Woodturning Projects Of All Sizes. The Black And Blue Coating Can Pleasing While Practically Adding Friction. Great For Woodworkers, Woodturners Of All Skill Levels. Perfect Gift For Woodworkers, Engineers And Diy Enthusiasts..
【Christmas Gift Lathe Tools More Stable】 Premium Cnc Machined From 1/2 Inch Square Stainless Steel, Which Is More Stable, Stiffer And Not Easy To Roll Than Round Shaft Tools. Offers Two Alloy Handles, Adjustable Length, Convenient And Efficient.Where You Can Fill Sand Into The Bottom One To Increase Counterweight And Stability For This Expandable Tool Handle..
Features
- Upgraded High-quality Turning Tools,handle And Connector Are Removable And Adjustable High-density tungsten carbide cutting heads are made with high-speed steel blade material which will not wear off easily. 2*Aluminum alloy detachable handle and connector, can be replaced or disassembled freely, saving a lot of money(other turning tools only have 1 non-replaceable connector, damage will not work).Aluminum alloy handle is sandblasted and anodized by electroplating, better feel for processing.
- Christmas Gift Lathe Tools More Stable Premium CNC machined from 1/2 inch square stainless steel, which is more stable, stiffer and not easy to roll than round shaft tools. Offers two alloy handles, adjustable length, convenient and efficient.where you can fill sand into the bottom one to increase counterweight and stability for this expandable tool handle.
- Indexable Cutter Design Indexable carbide cutter inserts can be rotated or replaced ,once the edge is blunt, you can always rotate the cutter head to get a new sharper edge.
- Versatile And Beautiful Utility turning tools for bowl gouge turning pens pepper mills spindles and lots more woodturning projects of all sizes. The black and blue coating can pleasing while practically adding friction. Great for woodworkers, woodturners of all skill levels. Perfect gift for woodworkers, engineers and DIY enthusiasts.
- 0ur Turning System Includes Roughing tool*1, Finishing tool*1, Detailer tool*1, Gooseneck Hollower tool*1,11-inch handles*2, aluminum alloy handle connector*1, 2 T15 wrenches, all in one In aluminum alloy display box.
- See more on Amazon...
Brand: Feotvo | Manufacturer: Feotvo03
See On Amazon #19
DEEFIINE Carbide Tip Wood Lathe Turning Tool Kit, Lathe Roughing and Finishing Hollow Tool Interchangeable Aluminum Alloy Handle with Diamond Round Square Carbide Blade (Metal handle)
Asin: B0BJDY36GG | Model: 060402C | PartNumber: 060402C
Rotary Cutter Design: The Indexable Carbide Tool Blade Can Be Rotated Or Replaced To Provide New Cutting Edge When Needed..
Woodturningtools And Accessories - 1Pcs Handle And 1Pcs Extension Bar ,3Pcs Tool Bars With Carbide Cutters(Round,Square,Diamond),1Pcs Swan Neck Carbide Cutter Hollowing Tools, 1Pcs T15 Wrench, 1Pcs Allen Wrench, 1Pc Aluminum Storage Case.Purchase Handle Or Carbide Inserts Pls Visit Our Store.
Ergonomic Design: The Turning Tool Is Equipped With 1Pcs Frosted Handle That Fits Comfortably In The Hand. In Addition, It Is Equipped With An Extension Handle That Can Be Used In Deeper Scenes, Aluminium Oxide Alloy Handles For Grip, Comfort And Durability. Making It A Safe Choice..
Wood Turning Tool Kit: The High-Quality Cnc Machining Made Of Square Stainless Steel Makes It Stronger, Harder And Rolls Less Than Round Shaft Tools. It Has A Square Shaft So That The Knife Can Be Used With A Flat Back. Keep The Shelf Flat And Flush With The Floor。.
Features
- Sharp and easy: Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull.
- wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor
- Rotary cutter design: the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed.
- Ergonomic design: the turning tool is equipped with 1pcs frosted handle that fits comfortably in the hand. In addition, it is equipped with an extension handle that can be used in deeper scenes, aluminium oxide alloy handles for grip, comfort and durability. making it a safe choice.
- woodturningTools and Accessories - 1pcs handle and 1pcs extension bar ,3PCS tool bars with carbide cutters(Round,Square,Diamond),1PCS swan neck carbide cutter hollowing tools, 1pcs T15 wrench, 1pcs allen wrench, 1PC aluminum storage case.purchase Handle or carbide inserts pls visit our store
- See more on Amazon...
Brand: DEEFIINE | Manufacturer: deefiine
Dimensions: 9.00 x 14.60 x 2.80 inches
See On Amazon #20
YUFUTOL Carbide Woodturning Tool Mini Size (3 Piece Set) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles Perfect For Turning Pens or Small to Mid-Size Turning Project
Asin: B07TPS9YL2 | Model: ZY-GHM-0902-2-214 | PartNumber: ZY-GHM-0902-2-214 | Ean: 0797646127207 | UPC: 797646127207
Set Includes 2Pcs Round 12Mm Carbide Cutters, 2Pcs Square 11Mm Carbide Cutters And 2Pcs Diamond With Radius Cutters..
Designed To Be Kept Flat On The Tool Rest And Level To The Floor, The Yufutol Finisher/Rougher/Detailer Will Effortlessly Hog Away Massive Amounts Of Material For Any Woodturning Process Without The Need For Sharpening，For Wood Hobbyist Or Diy Or Carpenter.
Easy To Use:Greatly Simplified Learning Curving When Turning,No Complicated Angles To Learn And Remember,For All Skill Levels Woodworking Enthusiast Or Diy.
Dimension：Length Of Tool Bar 4.72"(120Mm) ，Length Of Wood Handle：7.87"（200Mm），Overall Length 12.6"(320Mm).
Features
- Combo Set Include: 3 Pieces Wood Turning Tools(Mini Finisher/Rougher/Detailer),Carbide Insert Cutters And Allen Key
- Dimension Length of Tool Bar 4.72(120mm) Length of wood handle 7.87 200mm Overall length 12.6(320mm)
- Set includes 2pcs Round 12mm carbide cutters, 2pcs Square 11mm carbide cutters and 2pcs Diamond with radius cutters.
- Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY
- Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening for wood hobbyist or DIY or carpenter
- See more on Amazon...
Brand: YUFUTOL | Manufacturer: LA HARDWARE INC
Dimensions: 0.04 x 15.00 x 2.50 inches | Weight: 0.01 pounds
See On Amazon #21
AFA Tooling - Deburring Tool with 11 High Speed Steel Swivel Blades and Tungsten Carbide Scribe - Works on Metal, Resin, PVC Pipes, Copper, Plastic and 3D Printed Edges - Plumbing & 3D Printing Tool
Asin: B07B2MF4HN | Model: DeburringTool_TugstenScribet6in | PartNumber: DeburringTool_TugstenScribet6in | Ean: 0612520487300 | UPC: 612520487300
Highly Durable Hss Steel Deburring Blades: The Blades Are Made Of Tempered High-Speed Steel That Makes Them Sharp, Strong, And Resistant To Wear. Hss Steel Is Usually 80% Longer Lasting Then Regular Steel, And That’S Why We Use It, Because We Care About Our Performance!.
Our Guarantee: We Have Been In Business Since 2013, And We Care About Our Customers! All Our Deburring Tools Are Secured By A 1 Year Warranty! If You Have Any Issues Outside Of The Usual Wear Of The Blades, We Will Replace Your Tool For Free! If You Have Any Other Questions Or Concerns Please Feel Free To Contact Us!.
Superior Quality And Comfort: Equipped With An Ergonomic Aluminum Handle For Secure Grip, Quality Machined Parts And A Secure Case For Our Extra Blades, We Know Our Tool Is Built To Last..
Multi Material Application: Works Great For Cleanup Of Brass, Steel, Aluminum, Copper Or Pvc Pipes, As Well As Metal Edges Of Auto Parts, Gears, Or Any Other Freshly Cut Metal Parts. Also Great For Trimming The Edges Of Your 3D Printed Plastic Objects Or Parts. Our Deburring Tool Is The Perfect Plumbing Tool For Professional Plumbers. Whether You Are An Industrial Professional, Machinist, Or A Diyer, Our Deburring Tool Works For You!.
Features
- TOTAL OF 11 HEAVY-DUTY S-BLADES - Our deburring tool features a swivel head to help conform to uneven shapes. In addition to the blade attached to the deburring tool, there are 10 BS1010 extra blades provided.
- MULTI MATERIAL APPLICATION: Works great for cleanup of brass, steel, aluminum, copper or PVC pipes, as well as metal edges of auto parts, gears, or any other freshly cut metal parts. Also great for trimming the edges of your 3D printed plastic objects or parts. Our deburring tool is the perfect plumbing tool for professional plumbers. Whether you are an industrial professional, machinist, or a DIYer, our deburring tool works for you!
- HIGHLY DURABLE HSS STEEL DEBURRING BLADES: The blades are made of tempered high-speed steel that makes them sharp, strong, and resistant to wear. HSS steel is usually 80% longer lasting then regular steel, and that s why we use it, because we care about our performance!
- SUPERIOR QUALITY AND COMFORT: Equipped with an ergonomic aluminum handle for secure grip, quality machined parts and a secure case for our extra blades, we know our tool is built to last.
- OUR GUARANTEE: We have been in business since 2013, and we care about our customers! All our Deburring tools are secured by a 1 year warranty! If you have any issues outside of the usual wear of the blades, we will replace your tool for free! If you have any other questions or concerns please feel free to contact us!
- See more on Amazon...
Brand: AFA Tooling Approved for Automotive | Manufacturer: AFA Tooling Approved for Automotive
Dimensions: 0.20 x 7.87 x 5.12 inches | Weight: 0.09 pounds
See On Amazon #22
Lathe Tool Holder, S12m sDUCR0 Lathe Grooving Turning Tool Holder 10pcs DCMT0702 Carbide Inserts Wrench Carbide Turning Inserts Indexable Carbide Inserts for Metal Lathe
Asin: B0D3M3MNW5
Alloy Steel Material: Grooving Parting Blade Indexable Carbide Inserts Adopts Premium Alloy Steel Material, To Maintain Tight Tolerances And Unmatched Performance..
Satisfaction Guarantee: All Our Product Offer Return Policy Or Money Back Guarantee, If You Have Any Problem About Your Purchase, Pls Communicate With Us By Email, We Are Always Here To Make Everything Right For You..
Quick And Easy Clamping: Grooving Slotting Tool Is A Quick And Easy Clamping And Replacement, Only Need One Wrench To Complete The Replacement Of Blade And Shim. Good Rigidity And Long Service Life, Reducing The Use Cost Of The Tool..
Suitable For: Lathe Grooving Turning Tool Holder Is Suitable For A Variety Of Processing Environments, Even In Very Bad Cast Iron Processing Environment..
Features
- HIGH GRIP STRENGTH: Lathe tool holder with high grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
- SUITABLE FOR: Lathe grooving turning tool holder is suitable for a variety of processing environments, even in very bad cast iron processing environment.
- ALLOY STEEL MATERIAL: Grooving parting blade indexable carbide inserts adopts premium alloy steel material, to maintain tight tolerances and unmatched performance.
- QUICK AND EASY CLAMPING: Grooving slotting tool is a quick and easy clamping and replacement, only need one wrench to complete the replacement of blade and shim. Good rigidity and long service life, reducing the use cost of the tool.
- SATISFACTION GUARANTEE: All our product offer return policy or money back guarantee, if you have any problem about your purchase, pls communicate with us by Email, we are always here to make everything right for you.
- See more on Amazon...
Brand: Jwthee | Manufacturer: Jwthee
Dimensions: 1.57 x 5.91 x 1.57 inches | Weight: 0.40 pounds
See On Amazon #23
GBJ Carbide Tipped Wood Turning Tools Set, Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts
Asin: B0D3KTG4CV | Model: WOOD-TOOL | PartNumber: WOOD-TOOL | Ean: 0797999724092 | UPC: 797999724092
Excellent Reliable Ergonomics Grip Makes You Feel Comfortable And Light. Adjustable And Extendable Handle Support Freely Adjust The Length According To Your Preference. Wood Turning Tools Equipped With Tools To Adjust And Extend The Length, Easy And Flexible To Assemble And Disassemble，Note: This Is A Handle + An Extension Rod, Not 2 Handles；.
You Will Get 1* 11Inch Length Aluminum Lathe Tools Handle+ 1* 10Inch Length Handle Extension + 4* Carbide Tips +2*Tools; (4 Tips Included Round + Diamond+ Square + Hollower, 2 Tools Included T15 Wrench And Allen Wrench).
Carbide Wood Turning Tools Allow Both Beginner And Experienced Turners To Quickly Start Projects By Reducing The Learning Curve Associated With Traditional Turning Tools. And Our Wood Lathe Tools Bring You Outstanding Results, Ideal For Lathe Woodworking Or Diy Enthusiasts；.
Tool Shafts Are Cnc Machined From Square High Carbon Steel, Making Them Strong And Solid In The Hand. The Square Shaft Profile Helps Keep The Tool Flat On The Tool Rest And Level With The Floor, Making Them Less Likely Than Round Shaft Tools To Roll And Shift While On The Tool Rest..
Features
- Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability.
- Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest.
- Excellent reliable ergonomics grip makes you feel comfortable and light. Adjustable and Extendable handle support freely adjust the length according to your preference. Wood turning tools equipped with tools to adjust and extend the length, easy and flexible to assemble and disassemble NOTE: This is a handle + an extension rod, not 2 handles
- Carbide wood turning tools allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools. And our wood lathe tools bring you outstanding results, Ideal for lathe woodworking or DIY enthusiasts
- You will get 1* 11inch Length Aluminum lathe tools handle+ 1* 10inch Length Handle Extension + 4* Carbide Tips +2*Tools; (4 Tips included round + diamond+ square + hollower, 2 Tools included T15 wrench and allen wrench)
- See more on Amazon...
Brand: GBJ | Manufacturer: GBJ
See On Amazon #24
POWERTEC 71827 Carbide Tipped Woodturning Tool 3 Piece Set with Straight, Shallow Swan Neck & Deep Swan Neck for Deep Hollowing Work, Wood Lathe Chisel with Replaceable Tips
Asin: B0CQZD8ZQ3 | Model: 71827 | PartNumber: 71827 | Ean: 0843441122517 | UPC: 843441122517
Features: Mounted To Shafts Made Of Solid Stainless Steel Square Bar Stock, Mirror-Polished (For Durability). The Extra-Long (15-1/2”) Handles Are Made Of Solid, Smooth, Ergonomic Hardwood For A Comfortable Grip And Coupled With Stainless Steel Ferrules..
Easy To Use: These Wood Hollowing Tools Are Suitable For Woodworkers Of All Skill Levels, From Beginners To Experts. They Have A Simplified Learning Curve, With No Complicated Angles To Learn Or Remember. Suitable For Medium To Large Bowls, Hollow Form Projects, Deep Hollow Forms, But Also Popular With Ornamental And Craft Projects.
Replaceable Inserts: The Replaceable Inserts Can Cut Faster Without Binding, And Are Made To Withstand The Abrasive Nature Of Wood And Maintain Sharpness, Resulting In Smoother And More Precise Woodworking Applications For Long-Term Durability.
Applications: The Different Types Of Hollowing Tool Bars Allow You To Hollow Out A Vessel To Different Degrees Of Curvature And Precision. The Straight Bar Is The Most Versatile, But It Can Be Difficult To Use For Curved Surfaces. The Shallow Swan Neck Is A Good Option For Starting Curves, While The Deep Swan Neck Is Best For Getting Into Tight Spaces.
Features
- INCLUDES: 3pcs Stainless Steel Hollowing Tool Set with Handles and Combination of Insert Cutters - Extra Long Straight | Shallow Swan Neck | Deep Swan Neck, and 1pc 2mm Hex Key Wrench
- APPLICATIONS: The different types of hollowing tool bars allow you to hollow out a vessel to different degrees of curvature and precision. The straight bar is the most versatile, but it can be difficult to use for curved surfaces. The shallow swan neck is a good option for starting curves, while the deep swan neck is best for getting into tight spaces
- FEATURES: Mounted to shafts made of solid stainless steel square bar stock, mirror-polished (for durability). The extra-long (15-1/2 ) handles are made of solid, smooth, ergonomic hardwood for a comfortable grip and coupled with stainless steel ferrules.
- REPLACEABLE INSERTS: The replaceable inserts can cut faster without binding, and are made to withstand the abrasive nature of wood and maintain sharpness, resulting in smoother and more precise woodworking applications for long-term durability
- EASY TO USE: These wood hollowing tools are suitable for woodworkers of all skill levels, from beginners to experts. They have a simplified learning curve, with no complicated angles to learn or remember. Suitable for medium to large bowls, hollow form projects, deep hollow forms, but also popular with ornamental and craft projects
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 2.40 x 25.00 x 6.90 inches
See On Amazon #25
Accusize Industrial Tools Style BXA Boring, Turning & Facing Holder, for 5/8'' Turning Tools, Quick Change Tool Holder, Style 2, 6 Pc Set, 0250-0202x6
Asin: B0CNBHD1Y5 | Model: 0250-0202x6 | PartNumber: 0250-0202x6 | Ean: 0663566033303 | UPC: 663566033303
Style 2: Boring Turing & Facing.
Comprehensive Set Specifications: Includes Six Holders With Dimensions A: 1-1/8", C: 1/2", D: 1-3/4", L1: 1.761", L2: 1.265", H: 0.409", Maximizing Tool Setup Options..
Versatile Clamping System: Utilizes A V-Groove To Securely Hold Both Round Shank Boring Bars And Square Tool Bits, Supporting Up To 5/8" Turning Tools For Diverse Applications..
Robust Steel Construction: Crafted From Durable Steel, These Holders Are Built To Endure The Demands Of Continuous, Heavy-Duty Use In Various Machining Environments..
A: 1-1/8'', B: 5/8'', C: 1/2'', D: 1-3/4'', Shank: 1/2''.
Bxa Quick Change Compatibility: Custom-Fit For Bxa Model Tool Posts, Ensuring Seamless Integration And Superior Performance For Professional-Grade Machining..
Lathe Swing: 10 - 15'', Bxa.
Flexible Tool Accommodation: Compatible With Tool Bit Sizes Ranging From 1/4" To 5/8" And A Shank Size Of 1/2", Offering Extensive Versatility In Turning And Facing Operations..
Quick Change Tool Post (Usa Style). Made Of Steel..
Features
- For Lathe Swing 10-15''
- Quick Change Tool Post (USA STYLE). Made of steel.
- Style 2: Boring Turing & Facing
- Lathe Swing: 10 - 15'', BXA
- A: 1-1/8'', B: 5/8'', C: 1/2'', D: 1-3/4'', Shank: 1/2''
- BXA Quick Change Compatibility: Custom-fit for BXA model tool posts, ensuring seamless integration and superior performance for professional-grade machining.
- Versatile Clamping System: Utilizes a V-groove to securely hold both round shank boring bars and square tool bits, supporting up to 5/8 turning tools for diverse applications.
- Robust Steel Construction: Crafted from durable steel, these holders are built to endure the demands of continuous, heavy-duty use in various machining environments.
- Flexible Tool Accommodation: Compatible with tool bit sizes ranging from 1/4 to 5/8 and a shank size of 1/2, offering extensive versatility in turning and facing operations.
- Comprehensive Set Specifications: Includes six holders with dimensions A: 1-1/8, C: 1/2, D: 1-3/4, L1: 1.761, L2: 1.265, H: 0.409, maximizing tool setup options.
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 3.54 x 12.20 x 9.45 inches | Weight: 4.50 Kilograms
See On Amazon #26
18pcs Tungsten Carbide Cutters Inserts Set, SainSmart Wood Lathe Turning Tool Replacement Cutter Accessories, 11mm Square, 11mm Square with Radius, 12mm Round, 8.9mm Round, 30x10mm & 28x10mm Diamond
Asin: B0C7VSH847 | Model: MT18A | PartNumber: MT18A | Ean: 0816550027233 | UPC: 816550027233
Superior Material: Made Of High Quality Tungsten, These Inserts Are Incredibly Sharp And Durable, Ensuring Long-Lasting Performance..
Effortless Operation: They Are Easy To Install And Remove, Making Them A Great Replacement Insert Choice For Both Professional Carpenter And Beginners..
Cost-Effectiveness: When The Cutter Inserts Set For Wood Tools Become Dull And Don't Perform Well, Simply Rotate The Tip To Obtain A Fresh And Clean Cutting Edge That Can Also Last Longer..
Versatile Use: Ideal For Carving And Cutting Such As Plywood, Particle Board, Hardwood, Softwood, Acrylic, Mdf, Etc. It Is A Perfect Addition To Your Woodworking Tool Collection..
Features
- Value Pack: This package includes 18 pieces of various shapes, meeting all your wood turning needs. Shapes includes 11 mm Square, 11 mm Square with Radius, 12 mm Round, 8.9 mm Round, and two diamond cutters of sizes 30x10 mm, and 28x10 mm.
- Versatile Use: Ideal for carving and cutting such as plywood, particle board, hardwood, softwood, acrylic, MDF, etc. It is a perfect addition to your woodworking tool collection.
- Superior Material: Made of high quality tungsten, these inserts are incredibly sharp and durable, ensuring long-lasting performance.
- Cost-Effectiveness: When the cutter inserts set for wood tools become dull and don't perform well, simply rotate the tip to obtain a fresh and clean cutting edge that can also last longer.
- Effortless operation: They are easy to install and remove, making them a great replacement insert choice for both professional carpenter and beginners.
- See more on Amazon...
Brand: SainSmart | Manufacturer: SainSmart
See On Amazon #27
Round Circle Center Finder Compass Tool Round Center Finder Clear Acrylic Lathe Centering Tool Circle Gauge for Drawing Circles for Handicrafts, DIY Furniture (8 Inch)
Asin: B0BZRRYCLZ | Model: AERCFCDM01P | PartNumber: AERCFCDM01P | Ean: 0738170388566 | UPC: 738170388566
✎【Proper Design】The Number Scale Of Round Circle Center Finder Compass Tool Is The Radius, Laser Scale, Clear Reading, Not Easy To Stain, Easy To Operate,Thicken Design Of Ruler Body, Durable..
✎【Wide Application】The Center Finder Tool Works On Wood, Poster Board, Plastic, Glass,Fits For Wood Turning, Art, Crafts, School Projects And Finishing Woodworking..
✎【Easy To Use】Simply Tap A Small Nail Or Pin Through The Center Hole, Insert A Pencil In Your Choice Of Diameter Hole, Move It Till You Are Happy With The Center, And Pivot Around The Center Point To Make Your Circle Mark..
✎【Durable Round Center Finder】The Center Finder Compass Drawing Maker Is Made Of High-Quality Acrylic Material, Clearly Marked Circles In 1/2 Inch Increments..
Features
- Round Center Finder Compass This round center finder compass can find the center point on irregular items with a diameter of 200 mm/ 8 inches, easily find the largest circle on the log, avoid unnecessary waste of wood corner.
- Durable Round Center Finder The center finder compass drawing maker is made of High-quality acrylic material, clearly marked circles in 1/2 Inch increments.
- Proper Design The number scale of round circle center finder compass tool is the radius, laser scale, clear reading, not easy to stain, easy to operate,thicken design of ruler body, durable.
- Easy to Use Simply tap a small nail or pin through the center hole, insert a pencil in your choice of diameter hole, move it till you are happy with the center, and pivot around the center point to make your circle mark.
- Wide Application The center finder tool works on wood, poster board, plastic, glass,Fits for wood turning, art, crafts, school projects and finishing woodworking.
- See more on Amazon...
Brand: AccEncyc | Manufacturer: AccEncyc
See On Amazon #28
NNBWKIXI 12PCS Carbide Lathe Tools Carbide Inserts for Wood Lathe Turning Tool,Include 11mm Square with Radius,12mm and 8.9mm Round,30x10mm Diamond with Sharp Point with Screws
Asin: B0C58YHZWT | Model: NNBWKIXI0515 | PartNumber: NNBWKIXI0515 | Ean: 0788081186577 | UPC: 788081186577
【Exquisite Technology】: The Inserts Had Been High Precision Polished,Which Oxidation Resistance And Corrosion Resistance. Knife Surface Is Not Stained With Sawdust,Easy To Maintain And Clean.Improve The Aesthetics And Smoothness Of Your Diy Woodcraft..
【High-Quality After-Sales Service】: If You Are Not Satisfied With The Product At Any Time Within 1 Years After Purchase, We Will Provide A Refund Or Replacement. You Will Get 4 Kinds Of Tungsten Cutters Inserts, Which Are Square (11 X 11 X2mm), Diamond Shape (10 X 30 X 2.5Mm), 2 Kinds Round Shapes (12 X 12 X 2.5Mm And 8.9 X 8.9 X2 Mm) And 4Pcs Screws. 16Pieces In Total..
【Versatile Functions】: The Carbide Woodturning Cutter Is Reversible And Indexable, Just Rotate The Inserts That Would Giving You Numerous Fresh Edges Without Sharpening. Save Your Time. The Right 30° Cutting Angle Is Ground. Cuts Cleanly And Safely..
【Perfect Carbide Tips】: The Tungsten Carbide Cutter Inserts Are Combination Sets For Rougher,Detailer,Hollower,Finisher. Compatible With Wood Turning Tools And Other Related Accessories,Meet The Requirements Of Rough Machining And Finishing Combination..
Features
- Super Sharp & Durable : All Of The Lathe Tools Replacement Inserts Are Made Of Quality Solid Tungsten Steel.Polished To A Mirror Finish For Smoother Cutting And Longer Tool Life. Providing You A Better Experience And Durable Use.
- Perfect Carbide Tips : The Tungsten Carbide Cutter Inserts Are Combination Sets For Rougher,Detailer,Hollower,Finisher. Compatible With Wood Turning Tools And Other Related Accessories,Meet the requirements of rough machining and finishing combination.
- Exquisite Technology : The Inserts Had Been High Precision Polished,Which Oxidation resistance and corrosion resistance. Knife Surface Is Not Stained With Sawdust,Easy To Maintain And Clean.Improve The Aesthetics And Smoothness Of Your Diy Woodcraft.
- Versatile Functions : The Carbide Woodturning Cutter Is Reversible And Indexable, Just Rotate The Inserts That Would Giving You Numerous Fresh Edges Without Sharpening. Save your time. The Right 30 Cutting Angle Is Ground. Cuts Cleanly And Safely.
- High-quality after-sales service : If you are not satisfied with the product at any time within 1 years after purchase, we will provide a refund or replacement. You Will Get 4 Kinds Of Tungsten Cutters Inserts, Which Are Square (11 X 11 X2mm), Diamond Shape (10 X 30 X 2.5mm), 2 Kinds Round Shapes (12 X 12 X 2.5mm And 8.9 X 8.9 X2 mm) and 4pcs Screws. 16Pieces In Total.
- See more on Amazon...
Brand: NNBWKIXI | Manufacturer: NNBWKIXI
See On Amazon #29
DEEFIINE Carbide Tip Wood Lathe Turning Tool set With Bowl sander, Lathe Roughing and Finishing Hollowing Tool Interchangeable Aluminum Alloy Handle with 4pcs Carbide Blade For Woodturning
Asin: B0CDRGBBJ1 | Model: WTT060402BS-C | PartNumber: WTT060402BS-C
【Wood Turning Tool Kit】The High-Quality Cnc Machining Made Of Square Stainless Steel Makes It Stronger, Harder And Rolls Less Than Round Shaft Tools. It Has A Square Shaft So That The Knife Can Be Used With A Flat Back. Keep The Shelf Flat And Flush With The Floor。.
【Ergonomic Design】 The Turning Tool Is Equipped With 1Pcs Frosted Handle That Fits Comfortably In The Hand. In Addition, It Is Equipped With An Extension Handle That Can Be Used In Deeper Scenes, Aluminium Oxide Alloy Handles For Grip, Comfort And Durability. Making It A Safe Choice..
【Rotary Cutter Design】 The Indexable Carbide Tool Blade Can Be Rotated Or Replaced To Provide New Cutting Edge When Needed..
【Sharp And Easy】 Our Carbide Turning Tools Set Can Be Used To Quickly Process Any Workpiece On Your Lathe. The Wood Lathe Tool Set Can Provide A Smooth And Clean Cutting Effect By Four Types Of Cutters Designed For Different Grinding Effects. This Saves A Lot Of Time When Grinding And Honing, Because You Can Easily Replace The Blade When It Becomes Dull..
Features
- New design Our wood turning tools set with bowl sander,Bowl sander is new design product with a patent.
- Sharp and easy Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull.
- wood turning Tool kit The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor
- Rotary cutter design the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed.
- Ergonomic design the turning tool is equipped with 1pcs frosted handle that fits comfortably in the hand. In addition, it is equipped with an extension handle that can be used in deeper scenes, aluminium oxide alloy handles for grip, comfort and durability. making it a safe choice.
- See more on Amazon...
Brand: DEEFIINE | Manufacturer: DEEFIINE
Dimensions: 9.00 x 14.60 x 2.80 inches
See On Amazon #30
DEEFIINE 10Pcs Tungsten Carbide Cutters Inserts Set with 6pcs Screws for Woodturning Tools(Include 11mm Square, 11mm Square with Radius R50 12mm and 8.9mm Round,30x10mm Diamond with Sharp Point)
Asin: B0BNHSYZDZ | Model: CC10A | PartNumber: CC10A
Made Of Solid Tungsten Steel, It Offers You A Better Experience And A Long Service Life..
Carbide Inserts Set Are Supplied With 6Pcs Screws..
Clean Cutting Effect By Four Types Of Cutters Designed For Different Grinding Effects. This Saves A Lot Of Time When Grinding And Honing, Because You Can Easily Replace The Blade When It Becomes Dull..
This Combination Carbide Insert Kit Works Perfectly With Our Wood Lathe Turning Tools Kit. This Gives You The Best Option For Woodturning Wood. Suitable For Wood Turning Tools. Easy To Change Joints..
Features
- 5 different carbide cutters for all your needs: 2pcs square (11 x 11 mm), 2pcs Square with Radius (11x11mm),2pcs diamond (30 x 10 mm), 2pcs round (diameter 12 x 2.5 mm) and 2pcs round (diameter 8.9 x 1.85 mm).
- This combination carbide insert kit works perfectly with our wood lathe turning tools kit. This gives you the best option for woodturning wood. Suitable for wood turning tools. Easy to change joints.
- Made of solid tungsten steel, it offers you a better experience and a long service life.
- clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull.
- carbide inserts set are supplied with 6pcs screws.
- See more on Amazon...
Brand: DEEFIINE | Manufacturer: DEEFIINE
See On Amazon
Looking For Something Else?
Search