WenCrew Carbide Tipped Wood Turning Tools Set, 2023 Upgrade Carbide Lathe Tools for Woodturning, Lathe Rougher Finisher Swan Neck Hollowing Tools with Extendable Shafts
Asin: B0BG4QT947 | Model: carbide lathe tools-01 | PartNumber: carbide lathe tools-01
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.▶▶▶ Simple Operateion : Carbide Wood Turning Tools Allow Both Beginner And Experienced Turners To Quickly Start Projects By Reducing The Learning Curve Associated With Traditional Turning Tools. And Our Wood Lathe Tools Bring You Outstanding Results, Ideal For Lathe Woodworking Or Diy Enthusiasts.
▶▶▶ Delicate & Portable Case: Convenient Storage And Carry. You Will Get 1* 11Inch Length Aluminum Lathe Tools Handle+ 1* 10Inch Length Handle Extension + 4* Carbide Tips +2*Tools; (4 Tips Included Round + Diamond+ Square + Hollower, 2 Tools Included T15 Wrench And Allen Wrench).
▶▶▶ Note: This Is A Handle + An Extension Rod, Not 2 Handles, If You Need Additional Replacable Handles Or Tips, Please Check The Accessory Variant Link, All Of Them Can Be Sold Separately, If You Couldn't Find The Relevant Link, Please Email Directly To Our Customer Service Staff, We Will Send The Asin To You.
▶▶▶ Fast Handle Switching: Excellent Reliable Ergonomics Grip Makes You Feel Comfortable And Light. Adjustable And Extendable Handle Support Freely Adjust The Length According To Your Preference. Wood Turning Tools Equipped With Tools To Adjust And Extend The Length, Easy And Flexible To Assemble And Disassemble.
▶▶▶ High Stability: High Performance Stainless Steel Arbor And Aluminum Oxide Handles Increase Stability And Shock Resistance. Better Shock Resistant Wood Turning Tools Will Ensure The Handle Will Not Loosen When Vibrating, Which Will Make You Get A Good Cutting Effect In Safe Operation(Heavy Duty Wood Turning Tools For Lathe Are Less Likely To Roll And Move On The Tool Holder Than Wood Tools).
Features
- SAY GOODBYE TO SHARPENING ANNOYANCE: Upgrade premium carbide lathe tools are made with Rotatable tungsten carbide tip with sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge. Sharper & Luster Cutter can offer better strength and durability to helps maintain edge persistence, to avoid constant sharpening.
- HIGH STABILITY: High performance stainless steel arbor and aluminum oxide handles increase stability and shock resistance. Better shock resistant wood turning tools will ensure the handle will not loosen when vibrating, which will make you get a good cutting effect in safe operation(Heavy duty wood turning tools for lathe are less likely to roll and move on the tool holder than wood tools)
- SIMPLE OPERATEION : Carbide wood turning tools allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools. And our wood lathe tools bring you outstanding results, Ideal for lathe woodworking or DIY enthusiasts
- FAST HANDLE SWITCHING: Excellent reliable ergonomics grip makes you feel comfortable and light. Adjustable and Extendable handle support freely adjust the length according to your preference. Wood turning tools equipped with tools to adjust and extend the length, easy and flexible to assemble and disassemble
- DELICATE & PORTABLE CASE: Convenient storage and carry. You will get 1* 11inch Length Aluminum lathe tools handle+ 1* 10inch Length Handle Extension + 4* Carbide Tips +2*Tools; (4 Tips included round + diamond+ square + hollower, 2 Tools included T15 wrench and allen wrench)
- NOTE: This is a handle + an extension rod, not 2 handles, if you need additional replacable handles or tips, please check the accessory variant link, all of them can be sold separately, if you couldn't find the relevant link, please email directly to our customer service staff, we will send the asin to you
- See more on Amazon...
Brand: WenCrew | Manufacturer: WenCrew
Dimensions: 0.10 x 5.00 x 2.00 Inches
See On Amazon Similar To WenCrew Carbide Tipped Wood Turning
#1
HAUTMEC Professional Wood Turning Chisel 8 pcs Set, Lathe Chisel Set with 2 Skew 1 Spear Point 1 Parting 1 Round Nose & 3 Gouge Tools for Beginners, Hobbyists and Professionals HT0237-WW
Asin: B0BSGCWT6W | Model: HT0237-WW | PartNumber: HT0237-WW
Detailed Design - Light, Very Sharp, And Responsive, The Tools Are Already Sharpened And Can Be Used Immediately When You Get, No Need Further Sharpening; Durable Metal Ferrules Tighten The Handle For Stable Use Experience, Easuring Chisels' Safety And Reliability While Working. ".
Sturdy Handle - Shaped To Minimize Operator Fatigue, High Quality Hardwood Handles Make It Comfortable And Convenient For You To Hand The Chisel.
Premium Material - Made From High-Quality Triple Tempered Chromium-Vanadium Steel And Hardened To Last Long, Allowing You To Have Smooth And Sharp Carving Experience; Ground Tips For Precision Turning.
What's Included: 2-Skew: 1"", 1/2"" , 1-Spear Point: 1/2"" , 1-Parting Tool: 1/8"" , 1-Round Nose: 1/2"" , 3-Gouge: 1/4"", 1/2"", 3/4"" ".
Features
- Professional Application - This 8 pcs wood lathe chisel set is designed for turners in cutting and woodworking projects as well as hobbyists or handy men. This portable set is suitable for carving intricate details into wood pieces or chiseling runners for you furniture pieces
- What's included: 2-Skew: 1, 1/2 , 1-Spear Point: 1/2 , 1-Parting Tool: 1/8 , 1-Round Nose: 1/2 , 3-Gouge: 1/4, 1/2, 3/4
- Detailed Design - Light, very sharp, and responsive, the tools are already sharpened and can be used immediately when you get, no need further sharpening; durable metal ferrules tighten the handle for stable use experience, easuring chisels' safety and reliability while working.
- Premium Material - Made from high-quality triple tempered chromium-vanadium steel and hardened to last long, allowing you to have smooth and sharp carving experience; ground tips for precision turning
- Sturdy Handle - Shaped to minimize operator fatigue, high quality hardwood handles make it comfortable and convenient for you to hand the chisel
- See more on Amazon...
Brand: HAUTMEC | Manufacturer: SUOBO TOOLS
Dimensions: 0.10 x 14.17 x 1.02 inches
See On Amazon #2
TBPA 24 Pieces Tungsten Carbide Cutters Inserts Set for Wood Lathe Turning Tools Included 11mm Square with Radius,12mm and 8.9mm Round, 30x10mm Sharp Point Diamond,12 Pieces screws
Asin: B0CBSHTVLR | Ean: 0744128390284 | UPC: 744128390284
【Beginner-Friendly】The Carbide Cutters Replacement Inserts Set Is Designed To Meet The Requirements Of Both Rough And Precision Machining. It Is Compatible With Most Carbide Wood Lathe Turning Tool And Other Related Accessories, Making It Easy To Replace Cutters. It Is Perfect For Both Experienced Carpenters And Beginners..
【Multi-Functional】The Woodturning Tools Carbide Replacement Inserts Are Easy To Clean, And Their Thoughtful Design Helps Alleviate Fatigue To Some Extent. Perfect For Hollowing, Bevelling, Shaping Curves, And Adding Decorative Details..
【How To Maintain】When The Carbide Lathe Tools Replacement Inserts Become Dull Or Perform Poorly, Simply Rotate The Tip To Get A Fresh Cutting Edge. You Can Even Sharpen Them For Repeated Use, Extending Their Lifespan..
【Sharp & Lasting】All The Carbide Inserts Cutters Knifes Blades Are Made Of High-Quality Solid Tungsten Steel, Ensuring Strength And Durability. They Are Resistant To Breaking Or Deformation And Are Polished To A Mirror-Like Finish, Providing Smooth Cutting And A Long-Lasting Performance..
Features
- Versatile Set of 12 Blades This tungsten carbide cutters inserts set includes 4 different types of carbide cutting tools to meet all your needs: 3pcs square blades (11 x 11 mm / 0.43 x 0.43 inches), 3pcs diamond blades (10 x 30 mm / 0.39 x 1.18 inches), 3pcs round blades (12 x 2.5 mm / 0.47 x 0.1 inches), and 3pcs round blades (8.9 x 1.85 mm / 0.35 x 0.07 inches). The set comes with 12 screws for easy installation.
- Sharp & Lasting All the carbide inserts cutters knifes blades are made of high-quality solid tungsten steel, ensuring strength and durability. They are resistant to breaking or deformation and are polished to a mirror-like finish, providing smooth cutting and a long-lasting performance.
- Beginner-Friendly The carbide cutters replacement inserts set is designed to meet the requirements of both rough and precision machining. It is compatible with most carbide wood lathe turning tool and other related accessories, making it easy to replace cutters. It is perfect for both experienced carpenters and beginners.
- How to Maintain When the carbide lathe tools replacement inserts become dull or perform poorly, simply rotate the tip to get a fresh cutting edge. You can even sharpen them for repeated use, extending their lifespan.
- Multi-functional The woodturning tools carbide replacement inserts are easy to clean, and their thoughtful design helps alleviate fatigue to some extent. Perfect for hollowing, bevelling, shaping curves, and adding decorative details.
- See more on Amazon...
Brand: TBPA | Manufacturer: TBPA
See On Amazon #3
DEEFIINE Carbide Tip Wood Lathe Turning Tool Kit, Lathe Roughing and Finishing Hollow Tool Interchangeable Aluminum Alloy Handle with Diamond Round Square Carbide Blade (Metal handle)
Asin: B0BJDY36GG | Model: 060402C | PartNumber: 060402C
Rotary Cutter Design: The Indexable Carbide Tool Blade Can Be Rotated Or Replaced To Provide New Cutting Edge When Needed.If You Need More Carbide Cutters.Please Visit The Deefiine Store,Many Products For You To Choose..
Woodturningtools And Accessories - 1Pcs Handle And 1Pcs Extension Bar ,3Pcs Tool Bars With Carbide Cutters(Round,Square,Diamond),1Pcs Swan Neck Carbide Cutter Hollowing Tools, 1Pcs T15 Wrench, 1Pcs Allen Wrench, 1Pc Aluminum Storage Case.Purchase Handle Or Carbide Inserts Pls Visit Our Store.
Ergonomic Design: The Turning Tool Is Equipped With 1Pcs Frosted Handle That Fits Comfortably In The Hand. In Addition, It Is Equipped With An Extension Handle That Can Be Used In Deeper Scenes, Aluminium Oxide Alloy Handles For Grip, Comfort And Durability. Making It A Safe Choice.If You Need More Grip Handles.Please Visit The Deefiine Store,Many Products For You To Choose..
Wood Turning Tool Kit: The High-Quality Cnc Machining Made Of Square Stainless Steel Makes It Stronger, Harder And Rolls Less Than Round Shaft Tools. It Has A Square Shaft So That The Knife Can Be Used With A Flat Back. Keep The Shelf Flat And Flush With The Floor。.
Features
- Sharp and easy: Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull.
- wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor
- Rotary cutter design: the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed.If you need more carbide cutters.Please visit the DEEFIINE store,many products for you to choose.
- Ergonomic design: the turning tool is equipped with 1pcs frosted handle that fits comfortably in the hand. In addition, it is equipped with an extension handle that can be used in deeper scenes, aluminium oxide alloy handles for grip, comfort and durability. making it a safe choice.If you need more grip handles.Please visit the DEEFIINE store,many products for you to choose.
- woodturningTools and Accessories - 1pcs handle and 1pcs extension bar ,3PCS tool bars with carbide cutters(Round,Square,Diamond),1PCS swan neck carbide cutter hollowing tools, 1pcs T15 wrench, 1pcs allen wrench, 1PC aluminum storage case.purchase Handle or carbide inserts pls visit our store
- See more on Amazon...
Brand: DEEFIINE | Manufacturer: deefiine
Dimensions: 9.00 x 14.60 x 2.80 inches
See On Amazon #4
CDBP 11mm Square Straight Carbide Inserts for woodturning, 11 11 2.0mm Replacement Cutter for Woodworking Fits Spiral Helical Planer Cutter Head or lathe Turning Tipped, 10pcs
Asin: B09KBP6W6N | Model: 11×11×2.0mm | PartNumber: 11×11×2.0mm | Ean: 0761594655099 | UPC: 761594655099
High-Endurance And Enduringly Sharp Edges, Easy Installation And Replacement..
Cdbp Tools Developed A Series Of Standard Reversible Inserts And Customized Carbide Inserts, Profiled Standard Blanks, Spurs, Grooving Knives And Reversible Inserts For Portable Planers..
The Grade Bk10uf Is Good For Cutting Different Kinds Of Wood, Such As Mdf, Chipboard, Hardwood, Softwood And Plywood..
Solid Carbide For Long-Lived Sharpness, High Precision And Perfect Thickness Consistency..
Features
- Size: 11mm Length X 11mm Width X 2.0mm Thickness, 4-indexable cutting edge, 30 Cutting Angle, one countersink hole, For use with Mini and Mid-Size Easy Roughers and Easy Start Rougher.
- Solid carbide for long-lived sharpness, high precision and perfect thickness consistency.
- High-endurance and enduringly sharp edges, easy installation and replacement.
- The grade BK10UF is good for cutting different kinds of wood, such as MDF, Chipboard, Hardwood, Softwood and Plywood.
- CDBP Tools developed a series of standard Reversible inserts and Customized carbide inserts, Profiled standard blanks, Spurs, Grooving Knives and Reversible inserts for portable planers.
- See more on Amazon...
Brand: CDBP | Manufacturer: CDBP
See On Amazon #5
DEEFIINE Carbide Tip Wood Lathe Turning Tool set With Bowl sander, Lathe Roughing and Finishing Hollowing Tool Interchangeable Aluminum Alloy Handle with 4pcs Carbide Blade For Woodturning
Asin: B0CDRGBBJ1 | Model: WTT060402BS-C | PartNumber: WTT060402BS-C
【Wood Turning Tool Kit】The High-Quality Cnc Machining Made Of Square Stainless Steel Makes It Stronger, Harder And Rolls Less Than Round Shaft Tools. It Has A Square Shaft So That The Knife Can Be Used With A Flat Back. Keep The Shelf Flat And Flush With The Floor。.
【Ergonomic Design】 The Turning Tool Is Equipped With 1Pcs Frosted Handle That Fits Comfortably In The Hand. In Addition, It Is Equipped With An Extension Handle That Can Be Used In Deeper Scenes, Aluminium Oxide Alloy Handles For Grip, Comfort And Durability. Making It A Safe Choice.If You Need More Grip Handles.Please Visit The Deefiine Store,Many Products For You To Choose..
【Rotary Cutter Design】 The Indexable Carbide Tool Blade Can Be Rotated Or Replaced To Provide New Cutting Edge When Needed.If You Need More Carbide Cutters.Please Visit The Deefiine Store,Many Products For You To Choose..
【Sharp And Easy】 Our Carbide Turning Tools Set Can Be Used To Quickly Process Any Workpiece On Your Lathe. The Wood Lathe Tool Set Can Provide A Smooth And Clean Cutting Effect By Four Types Of Cutters Designed For Different Grinding Effects. This Saves A Lot Of Time When Grinding And Honing, Because You Can Easily Replace The Blade When It Becomes Dull..
Features
- New design Our wood turning tools set with bowl sander,Bowl sander is new design product with a patent.
- Sharp and easy Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull.
- wood turning Tool kit The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor
- Rotary cutter design the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed.If you need more carbide cutters.Please visit the DEEFIINE store,many products for you to choose.
- Ergonomic design the turning tool is equipped with 1pcs frosted handle that fits comfortably in the hand. In addition, it is equipped with an extension handle that can be used in deeper scenes, aluminium oxide alloy handles for grip, comfort and durability. making it a safe choice.If you need more grip handles.Please visit the DEEFIINE store,many products for you to choose.
- See more on Amazon...
Brand: DEEFIINE | Manufacturer: DEEFIINE
Dimensions: 9.00 x 14.60 x 2.80 Inches
See On Amazon #6
Ci3 R1 12mm Round Carbide Inserts Cutters Knifes Indexable Replacement High Strength Fits For Popular DIY Woodworking Lathe Wood Turning Finisher Hollower Tools 10pcs
Asin: B07RZ6YDJ4 | Ean: 0718774617545 | UPC: 718774617545
Very Perfect For Finish The Curved, Concave Surfaces , Hollower Jobs And For General Wood Turning Applications.
Package:10Pcs Diameter 12Mm Round Carbide Insert In A Plastic Box.
Leaves Smooth Finishing After Cut.
Material Type：Tungsten Carbide, Excellent For Wood Howllowing,The Right Geometry Or Cutting Angle Is Ground To Provide An Edge The Cuts Cleanly And Safely.
Features
- Size: 12mm(0.472") Diameter, 2.5mm Thickness, 30 Cutting Angle, 0.178" dia. countersink mounting hole
- Material Type Tungsten Carbide, Excellent for wood Howllowing,The right geometry or cutting angle is ground to provide an edge the cuts cleanly and safely
- Very Perfect for finish the curved, concave surfaces , hollower jobs and for general wood turning applications
- Leaves smooth finishing after cut
- Package:10pcs diameter 12mm Round carbide insert in a plastic box
- See more on Amazon...
Brand: Asieg Tool | Manufacturer: Asieg Tool
See On Amazon #7
WEN LA3424 4.5-Amp 12-Inch by 18-Inch 5-Speed Benchtop Wood Lathe , Black
Asin: B09XWRBJ95 | Model: LA3424 | PartNumber: LA3424 | Ean: 0044459934240 | UPC: 044459934240
Includes 3-1/8 Inch Faceplate For Turning Bowls, Cups And Other Non-Spindle Workpieces.
Features A 4.5A Motor, An Mt2 Headstock Spur Center, An Mt2 Tailstock Live Center, An 8-Inch Tool Rest, And An Onboard Accessory Holder.
Mt2 Tailstock And Headstock Tapers Allow For Compatibility With A Wide Variety Of Lathe Accessories.
Switch Between Five Different Speeds: 520, 900, 1400, 2150, Or 3400 Rpm.
Features
- Attack workpieces up to 18 inches long and 12 inches wide
- Switch between five different speeds: 520, 900, 1400, 2150, or 3400 RPM
- Includes 3-1/8 inch faceplate for turning bowls, cups and other non-spindle workpieces
- MT2 tailstock and headstock tapers allow for compatibility with a wide variety of lathe accessories
- Features a 4.5A motor, an MT2 headstock spur center, an MT2 tailstock live center, an 8-inch tool rest, and an onboard accessory holder
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
Dimensions: 16.25 x 30.25 x 8.75 inches
See On Amazon #8
Diraeen 35Pcs Tungsten Carbide Cutters Inserts Set,Lathe Tools for Wood Lathe Turning Tools,Supplied with Screws and Screwdriver
Asin: B0C56QRJTB | Model: 35PCS | PartNumber: 35PCS
【3 Screwdrivers And 16 Screws】 The Tungsten Cutting Tool Blade Comes With Multiple Screwdrivers And Screws. Fully Equipped And Easy To Replace.
【High-Quality After-Sales Service】If You Are Not Satisfied With The Product At Any Time Within 1 Years After Purchase, We Will Provide A Refund Or Replacement. Package Included: 4*Square (11 X 11 Mm), 4*Diamond (30 X 10 Mm), 4* Round (Diameter 12 X 2.5 Mm) , 4*Round (Diameter 8.9 X 1.85 Mm), 16* Screws, 3*Screwdriver.
【Fits For Wood Lathe Turning Tools】This Combination Carbide Insert Kit Works Perfectly With Our Wood Lathe Turning Tools Kit.Meet The Requirements Of Rough Machining And Finishing Combination.
【Solid Tungsten Steel】All Of The Carbide Lathe Tools Replacement Inserts Are Made Of Quality Solid Tungsten Steel. Super Sharp And Durable, Long Lasting And Reliable, Hard To Break Or Deform, Providing You With Nice Use Experiences For A Long Time.
Features
- Carbide Lathe Tools Replacement Tips with Screws and Screwdriver Fits For Most Size 11 mm Square with Radius, 12 mm and 8.9 mm Round, 30 x 10 mm Diamond
- Solid Tungsten Steel All of the carbide lathe tools replacement inserts are made of quality solid tungsten steel. Super sharp and durable, long lasting and reliable, hard to break or deform, providing you with nice use experiences for a long time
- 3 screwdrivers and 16 screws The tungsten cutting tool blade comes with multiple screwdrivers and screws. Fully equipped and easy to replace
- Fits for wood lathe turning tools This combination carbide insert kit works perfectly with our wood lathe turning tools kit.Meet the requirements of rough machining and finishing combination
- High-quality after-sales service If you are not satisfied with the product at any time within 1 years after purchase, we will provide a refund or replacement. Package included: 4*Square (11 x 11 mm), 4*Diamond (30 x 10 mm), 4* Round (diameter 12 x 2.5 mm) , 4*Round (diameter 8.9 x 1.85 mm), 16* Screws, 3*Screwdriver
- See more on Amazon...
Brand: Diraeen | Manufacturer: DIRAEEN
See On Amazon #9
Ci0 16mm Round Carbide Inserts Cutters Knifes Indexable Replacement with Screws Fits For Full And Pro Size Popular DIY Wood Turning Finisher Hollower Tools Woodworking Lathe 10pcs
Asin: B07VRN2VC9 | Ean: 0718774618269 | UPC: 718774618269
Very Perfect For Finish The Curved, Concave Surfaces , Hollower Jobs And For General Wood Turning Applications.
Package:10Pcs Diameter 16Mm Round Carbide Insert And 10 Screws In A Plastic Box.
Leaves Smooth Finishing After Cut.
Material Type：Tungsten Carbide, Excellent For Wood Howllowing,The Right Geometry Or Cutting Angle Is Ground To Provide An Edge The Cuts Cleanly And Safely.
Features
- Size: 16mm(5/8") Diameter 3.0mm Thickness, 30 Cutting Angle, a countersink mounting hole
- Material Type Tungsten Carbide, Excellent for wood Howllowing,The right geometry or cutting angle is ground to provide an edge the cuts cleanly and safely
- Very Perfect for finish the curved, concave surfaces , hollower jobs and for general wood turning applications
- Leaves smooth finishing after cut
- Package:10pcs diameter 16mm Round carbide insert and 10 screws in a plastic box
- See more on Amazon...
Brand: Asieg Tool | Manufacturer: Asieg Tool
See On Amazon #10
VINWOX 8 PCS Carbide Wood Lathe Turning Tool Set, Carbide Lathe Turning Tool, Including Swan Neck Hollower, Rougher, Finisher, Detailer, Pen Turning tools, Aluminum Alloy Handles from 14" to 29"
Asin: B0CG61QPF3 | Model: wood chisel-4pcs ALU Handle | PartNumber: wood chisel-4pcs ALU Handle | Ean: 0769293700683 | UPC: 769293700683
✅The Length Of The Shank Inserted Into The Handle Is Adjustable According To Your Need On Turning Reach..
✅Simply More Turning & Long Lasting, Say Good-Bye To Sharpening Tools. Top Quality And Long Cutting Life Guaranteed..
✅Detailer With 28X10mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Make Final Touch On Small Beads Or Coves, Terrific On Chuck Tenons..
✅Including One Set Carbide Tip Insert Installed On Chisel..
✅Square Rougher With 11X11x2mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Removes Bulk Fast And Efficiently, Terrific On Cutting Hard Materials..
✅Round Finisher With Ø12 Mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Make Finishing Fast And Efficiently, Terrific Scraping Workout..
✅Swan Neck Hollower With Ø9x1.8Mm Carbide Tip And 3/4”X3/8” (19X10mm) Thick Polished Solid Swan Neck Toolbar Features With Sturdy Turning Feeling Whenever You Start Turning, Perfect Turning On All Inside Holes! Remember 29” Extra Long Handle Is Important On Hollowing Projects..
✅Two Pieces Aluminum Alloy Handles, The Normal Rod Connected To The Carbide Toolbar, The Extended Rod Can Be Screwed Onto The Normal Rod, Flexible Tool Length From 14“ To 29”.
✅All Tool Bars, From 3/4”X3/8” Swan Neck Toolbar To 3/8”X3/8” Regular Rougher/Finisher/Detailer Toolbars Are Fully Polished For Most Smooth Sliding On Tool Rest For Each Workpiece..
Features
- The VINWOX Carbide Turning Tools are Designed with Ease of Use in Mind. It is Ideal for Wood Turners of All Skill Levels and Helps Ensure Success Right From the Start. The VINWOX Carbide Turning Tools Eliminate the Need for Sharpening of Your Turning Tools Since It Features a Rotatable Cutter Head.
- All Tool Bars, from 3/4 x3/8 Swan Neck Toolbar to 3/8 x3/8 Regular Rougher/Finisher/Detailer Toolbars are Fully Polished for Most Smooth Sliding on Tool Rest for Each Workpiece.
- The Length of the Shank Inserted into the Handle is Adjustable According to Your Need on Turning Reach.
- SWAN NECK HOLLOWER with 9x1.8mm Carbide Tip and 3/4 x3/8 (19x10mm) Thick Polished Solid Swan Neck Toolbar Features with Sturdy Turning Feeling Whenever You Start Turning, Perfect Turning on All Inside Holes! Remember 29 Extra Long Handle is Important on Hollowing Projects.
- SQUARE ROUGHER with 11x11x2mm Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Removes Bulk Fast and Efficiently, Terrific on Cutting Hard Materials.
- ROUND FINISHER with 12 MM Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Make Finishing Fast and Efficiently, Terrific Scraping Workout.
- DETAILER with 28x10mm Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Make Final Touch on Small Beads or Coves, Terrific on Chuck Tenons.
- Including One Set Carbide Tip Insert Installed on Chisel.
- Two Pieces Aluminum Alloy Handles, the Normal Rod Connected to the Carbide Toolbar, the Extended Rod Can Be Screwed onto the Normal Rod, Flexible Tool Length from 14 to 29
- Simply More Turning & Long Lasting, SAY Good-bye to Sharpening tools. Top quality and Long cutting life Guaranteed.
- See more on Amazon...
Brand: VINWOX | Manufacturer: VINWOX
See On Amazon #11
YUFUTOL Carbide Woodturning Tool Mini Size (3 Piece Set) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles Perfect For Turning Pens or Small to Mid-Size Turning Project
Asin: B07TPS9YL2 | Model: ZY-GHM-0902-2-214 | PartNumber: ZY-GHM-0902-2-214 | Ean: 0797646127207 | UPC: 797646127207
Set Includes 2Pcs Round 12Mm Carbide Cutters, 2Pcs Square 11Mm Carbide Cutters And 2Pcs Diamond With Radius Cutters..
Designed To Be Kept Flat On The Tool Rest And Level To The Floor, The Yufutol Finisher/Rougher/Detailer Will Effortlessly Hog Away Massive Amounts Of Material For Any Woodturning Process Without The Need For Sharpening，For Wood Hobbyist Or Diy Or Carpenter.
Easy To Use:Greatly Simplified Learning Curving When Turning,No Complicated Angles To Learn And Remember,For All Skill Levels Woodworking Enthusiast Or Diy.
Dimension：Length Of Tool Bar 4.72"(120Mm) ，Length Of Wood Handle：7.87"（200Mm），Overall Length 12.6"(320Mm).
Features
- Combo Set Include: 3 Pieces Wood Turning Tools(Mini Finisher/Rougher/Detailer),Carbide Insert Cutters And Allen Key
- Dimension Length of Tool Bar 4.72(120mm) Length of wood handle 7.87 200mm Overall length 12.6(320mm)
- Set includes 2pcs Round 12mm carbide cutters, 2pcs Square 11mm carbide cutters and 2pcs Diamond with radius cutters.
- Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY
- Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening for wood hobbyist or DIY or carpenter
- See more on Amazon...
Brand: YUFUTOL | Manufacturer: LA HARDWARE INC
Dimensions: 0.04 x 15.00 x 2.50 inches | Weight: 0.01 Pounds
See On Amazon #12
Carbide Tipped Wood Turning Tools Set, Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts
Asin: B08MBRPX3Z | Model: mugongju001 | PartNumber: mugongju001 | Ean: 0799117405289 | UPC: 799117405289
Indexable Cutter Design – Indexable Carbide Cutter Inserts Can Be Rotated Or Replaced To Provide A Fresh Cutting Edge Whenever Needed, ( Click The "Aogbra Store" To Order Replace Carbide Cutter Inserts When You Need ).
Tool Details – Tool Shafts Are Cnc Machined From Square High Carbon Steel, Making Them Strong And Solid In The Hand. The Square Shaft Profile Helps Keep The Tool Flat On The Tool Rest And Level With The Floor, Making Them Less Likely Than Round Shaft Tools To Roll And Shift While On The Tool Rest..
Easy To Use – The Variable Length Shaft Design And Carbide Cutters Are Valuable To All Skill Levels Of Woodworkers. Carbide Cutters Allow Both Beginner And Experienced Turners To Quickly Start Projects By Reducing The Learning Curve Associated With Traditional Turning Tools..
Material - Tools Are Made With Tungsten Carbide Tips For Extended Cutter Life, Stainless Steel Arbor For Strength And Durability, And Aluminum Oxide Alloy Handles For Grip, Comfort, And Durability..
Features
- OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert.
- MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability.
- INDEXABLE CUTTER DESIGN Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the Aogbra Store to order replace carbide cutter inserts when you need )
- EASY TO USE The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools.
- TOOL DETAILS Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest.
- See more on Amazon...
Brand: Aogbra | Manufacturer: Aogbra
See On Amazon #13
Authentic Easy Wood Tools Ci3-NR (6400NR) Patented Negative Rake Round Replacement Carbide Cutter fits Our Easy Start, Mini & Mid-Size Finishers and Full & Pro-Size Hollower Woodturning Tools
Asin: B07FY6B6V6 | Model: Ci3-NR | PartNumber: Ci3-NR | Ean: 0811269020957 | UPC: 811269020957
Try Resin Or Acrylic With Confidence--Our Patented Negative Rake Carbide Cutters (Patent Pending) Are A Game Changer! They Create Smooth, Safe, Continuous Cuts And Make Turning Man Made Materials And Super Hard Woods Safer And Easier...Smoother Finishes Equals Less Sanding!.
Designed And Manufactured 100% In The Usa.
Smoother Finishes Equals Less Sanding Too!.
Authentic Easy Wood Tools Ci3-Nr Negative Rake Replaceable Carbide Cutter Is Designed Specifically For Turning Difficult To Turn Resins, Acrylics And Extreme Hardwoods - Comes With New Mounting Screw.
Features
- Authentic Easy Wood Tools Ci3-NR - Round Patented Negative Rake Carbide Cutter designed to only fit Easy Start Finishers, Mini & Mid-Size Easy Finishers and Easy Hollowers both the Full and Pro size
- Authentic Easy Wood Tools Ci3-NR Negative Rake Replaceable Carbide Cutter is designed specifically for turning difficult to turn resins, acrylics and extreme hardwoods - comes with new mounting screw
- Try resin or acrylic with confidence--our Patented Negative Rake Carbide Cutters (patent pending) are a game changer! They create smooth, safe, continuous cuts and make turning man made materials and super hard woods safer and easier...smoother finishes equals less sanding!
- Smoother finishes equals less sanding too!
- Designed and Manufactured 100% in the USA
- See more on Amazon...
Brand: Easy Wood Tools | Manufacturer: Easy Wood Tools
Dimensions: 0.25 x 4.90 x 2.00 inches | Weight: 0.01 Pounds
See On Amazon #14
Carbide Tipped Wood Turning Tools Set, CRAFTFORCE Wood Lathe Tools with 2 Removable Handles and a Adjustable Connector,Carbide Lathe Tools for Woodturning Including Swan Neck Hollower,Rougher,Finisher
Asin: B0C61S54DK | Model: TR050 | PartNumber: TR050
【Premium Workmanship】Premium Aluminum Alloy And Anodized Finish Make The Handles Stronger Wear Resistance; Cnc Machined From High Quality Square Stainless Steel Arbor Which Is More Shock-Resistant And Stable Make You Get A Good Cutting Effect In Safe Operation; Tungsten Carbide Cutter Inserts Are Not Easy To Wear Out Because Of High Resistance To Deformation And Flexure..
【Easy To Use】Our Woodworking Lathe Tool Set Greatly Simplified Learning Curving When Turning Which Is Easy To Use, Great For Woodworkers Of All Skill Levels Or Diy Enthusiasts, And You'll Get Great Results With Our Carbide Turning Tools..
【Wood Turning Tools Set In A Delicate & Protable Case】Our Carbide Tipped Wood Lathe Turning Tools Set Comes With Detachable Handle*2, Aluminum Alloy Handle Connector*1, Roughing Tool*1, Finishing Tool*1, Detailer Tool*1, Gooseneck Hollower Tool*1, Allen Wrench*1, T15 Wrench*1, Extra Carbide Cutter Insert & Screw*4, Extra Handle Screw*4, All In One In Aluminum Alloy Display Box..
【Length Adjustable & Cutter Indexable】Adjustable And Extendable Turning Tool Support Freely Adjust The Length According To Your Preference. Upgrade Indexable Carbide Cutter Inserts Can Be Rotated Or Replaced Once The Edge Becomes Dull, You Can Always Rotate The Cutter Head To Get A New Sharper Edge..
Features
- Upgraded High-quality Turning Tools 2 * Aluminum alloy detachable handle and 1 * connector can improve efficiency than other turning tools only have a handle and an extension rod. Ergonomic grip of the handle for comfort and stability. Non-slip rubber cover of the handle add friction for better control & reduce vibration on hand. Extra carbide cutter insert & screw*4 and extra handle screw*4 solve the problems of lost screws and dull blades.
- Length Adjustable & Cutter Indexable Adjustable and extendable turning tool support freely adjust the length according to your preference. Upgrade indexable carbide cutter inserts can be rotated or replaced once the edge becomes dull, you can always rotate the cutter head to get a new sharper edge.
- Premium Workmanship Premium aluminum alloy and anodized finish make the handles stronger wear resistance; CNC machined from high quality square stainless steel arbor which is more shock-resistant and stable make you get a good cutting effect in safe operation; Tungsten carbide cutter inserts are not easy to wear out because of high resistance to deformation and flexure.
- Wood Turning Tools Set in a Delicate & Protable Case Our carbide tipped wood lathe turning tools set comes with detachable handle*2, aluminum alloy handle connector*1, roughing tool*1, finishing tool*1, detailer tool*1, gooseneck hollower tool*1, allen wrench*1, T15 wrench*1, extra carbide cutter insert & screw*4, extra handle screw*4, all in one in aluminum alloy display box.
- Easy to Use Our woodworking lathe tool set greatly simplified learning curving when turning which is easy to use, great for woodworkers of all skill levels or DIY enthusiasts, and you'll get great results with our carbide turning tools.
- See more on Amazon...
Brand: CRAFTFORCE | Manufacturer: CRAFTFORCE
See On Amazon #15
33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades
Asin: B092R2GLPH | Model: Honoson-916243 | PartNumber: Honoson-916243
Size: Diameter Of The Handle Is (5/8 X 5/8 Inches/ 16 X 16 Mm); Overall Length Is 3-7/8 Inch/ 100 Mm, Cutting Direction Is Right Hand; Applicable Machine Tool Is Lathe; Each Tool Holder Has A Black Oxidized Smooth Surface, And The Tool Hardness (Hrc Up And Down 48 Degrees) And Accuracy Have Reached The First Grade.
Note: Due To The Slight Color Change Of Manual Measurement And Different Display Settings, Please Allow A Difference Of 1-3 Cm; Due To The Difference Between Different Monitors, The Picture May Not Reflect The Actual Color Of The Item.
Easy To Store: Insert 30 Pieces Of Cemented Carbide Into 3 Boxes, And Put Them In A Plastic Container, Safe And Easy To Store, Compatible With Mtjnl1616h16, Mwlnl1616h08, Mclnl1616h12 Or Mtjnr1616h16, Mwlnr1616h08, Mclnr1616h12.
Material: Lathe Indexable Carbide Turning Tool Holders Are Made Of Quality Cemented Carbide And Tungsten Steel; The Cemented Carbide Material Makes The Turning Tool Durable And Adaptable; Indexable Carbide Turning Insert Blades Are Made Of Cemented Carbide And Use Pvd Coating, The Blade Has High Hardness, Low Friction Coefficient, Nice Wear Resistance And Chemical Stability.
Features
- Package: you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace
- Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel; The cemented carbide material makes the turning tool durable and adaptable; Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability
- Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm); Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand; Applicable machine tool is lathe; Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade
- Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12
- Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm; Due to the difference between different monitors, the picture may not reflect the actual color of the item
- See more on Amazon...
Brand: Honoson | Manufacturer: Honoson
See On Amazon #16
Vevor Lathe Chisel 8 Piece Wood Lathe Chisel Cutting Carving HSS Steel Blades Wood Turning Tools Lathe Chisel Set Wooden Case for Storage for Wood Turning Hardwood One Free Chisel - Amazon.com
Asin: B07YDSXWTY | Model: Lathe Chisel 8 Piece Wood Lathe Chisel | PartNumber: Lathe Chisel 8 Piece Wood Lathe Chisel | Ean: 0768558006249 | UPC: 768558006249
【Safe Brass Ferrules】- High Speed Steel Blades Are Tightly Connected To The Handle By Durable Brass Ferrules, Easuring Chisels' Safety And Reliability While Working..
【Attractive Wood Tool Box】- A Wooden Case For Easy Storage And Transportation. Compact Design. Foam Bases To Protect Wood Chisel Sets From Any Damage. .
【Reliable & Sturdy】- Solid Wood Material Handles. Ergonomics Design Offers It More Comfortable While Doing Turning Job. Each Tool Handle Is Beautifully Turned Hardwood That Are Approximately 9.06"(23Cm) Long..
【8 Pcs Chisels Set】- Chisels Range In Overall Length Is About 16.14" (41Cm). The Lathe Tools Includes 8 Essential Chisels: 1X Inch Parting Tool, 1X Spear Scraper, 1X Skew Chisel, 1X Inch Skew Chisel, 1X Inch Round Nose Scraper, 1X Inch Bowl Gouge, 1X Inch Spindle Gouge, 1X Inch Roughing Gouge. One Free 5/8" Chisel For You..
Features
- SOLID BLADES DESIGN - The lathe chisels are made from high speed steel, featuring shrill edge and fine grinding. Durable and accurate design. Blades is about about 6.50" (16.5cm).
- 8 PCS CHISELS SET - Chisels range in overall length is about 16.14 (41cm). The lathe tools includes 8 essential chisels: 1x inch parting tool, 1x spear scraper, 1x skew chisel, 1x inch skew chisel, 1x inch round nose scraper, 1x inch bowl gouge, 1x inch spindle gouge, 1x inch roughing gouge. One free 5/8 chisel for you.
- SAFE BRASS FERRULES - High speed steel blades are tightly connected to the handle by durable brass ferrules, easuring chisels' safety and reliability while working.
- RELIABLE & STURDY - Solid wood material handles. Ergonomics design offers it more comfortable while doing turning job. Each tool handle is beautifully turned hardwood that are approximately 9.06(23cm) long.
- ATTRACTIVE WOOD TOOL BOX - A wooden case for easy storage and transportation. Compact design. Foam bases to protect wood chisel sets from any damage.
- See more on Amazon...
Brand: Vevor | Manufacturer: Mophorn
Dimensions: 2.40 x 18.90 x 13.00 Inches | Weight: 7.00 pounds
See On Amazon #17
Full Size Professional Carbide Wood Turning Tools for Lathe Woodworking, 9 Pc. Set, Heavy Duty Rougher, Finishers, Detailer, and Replacement Cutting Blades, Beech Wood Handles
Asin: B0BPZPBWX5 | Model: TK-0001 | PartNumber: TK-0001 | Ean: 0761371580958 | UPC: 761371580958
Large, Fluted Wood Handle Grips – Each Wood Turning Tool Set Is Fitted With Beech Wood Handles That Provides A More Comfortable, Non-Slip Grip When You’Re Working, Which Is Especially Important For Maintaining Control And Stability During Operation..
Beginner And Professional Ready Use – Our Wood Turning Kits Provide Everything Someone Needs To Start A New Project, Learn How To Use A Lathe, Or Support A Small Woodworking Business Thanks To Their Quality, Durability, And Long-Term Resilience..
Heavy-Duty Carbide Construction – These Wood Turning Tools For Lathes Are Made For Rugged, Everyday Use. That Means You Can Make Chair Legs, Baseball Bats, Banisters, And Loads Of Other Woodworking Projects With Consistent Reliability..
Must-Have Woodworking Accessories – Along With Our Wood Turning Chisels You’Ll Also Receive Four Replacement Cutting Blades, One For Each Tool, As Well As Four Hex Key Tools To Help With Blade Replacement, So You’Re Better Prepared For Every Job..
Features
- Premium Wood Turning Lathe Tools A versatile woodworking tool package that includes four cutting tools including a rougher, two finishers, and a detailer this woodturning chisel bundle is designed to help you unleash your DIY creativity.
- Must-Have Woodworking Accessories Along with our wood turning chisels you ll also receive four replacement cutting blades, one for each tool, as well as four hex key tools to help with blade replacement, so you re better prepared for every job.
- Large, Fluted Wood Handle Grips Each wood turning tool set is fitted with beech wood handles that provides a more comfortable, non-slip grip when you re working, which is especially important for maintaining control and stability during operation.
- Heavy-Duty Carbide Construction These wood turning tools for lathes are made for rugged, everyday use. That means you can make chair legs, baseball bats, banisters, and loads of other woodworking projects with consistent reliability.
- Beginner and Professional Ready Use Our wood turning kits provide everything someone needs to start a new project, learn how to use a lathe, or support a small woodworking business thanks to their quality, durability, and long-term resilience.
- See more on Amazon...
Brand: KUTR | Manufacturer: KUTR
Dimensions: 1.25 x 16.50 x 1.25 inches | Weight: 3.63 pounds
See On Amazon #18
Carbide Lathe Tools, Wood Lathe Tools with Removable Handle, Latest Upgraded Turning Tool with Adjustable Connector including Swan Neck Hollower, Rougher, Finisher(Alloy Tool Set) Black
Asin: B09WTK9N39 | Model: Feotvo03 | PartNumber: Feotvo03 | Ean: 0726189482900 | UPC: 726189482900
【Indexable Cutter Design 】Indexable Carbide Cutter Inserts Can Be Rotated Or Replaced ,Once The Edge Is Blunt, You Can Always Rotate The Cutter Head To Get A New Sharper Edge..
【0Ur Turning System Includes】 Roughing Tool*1, Finishing Tool*1, Detailer Tool*1, Gooseneck Hollower Tool*1,11-Inch Handles*2, Aluminum Alloy Handle Connector*1, 2 T15 Wrenches, All In One In Aluminum Alloy Display Box..
【Versatile And Beautiful】Utility Turning Tools For Bowl Gouge Turning Pens Pepper Mills Spindles And Lots More Woodturning Projects Of All Sizes. The Black And Blue Coating Can Pleasing While Practically Adding Friction. Great For Woodworkers, Woodturners Of All Skill Levels. Perfect Gift For Woodworkers, Engineers And Diy Enthusiasts..
【Christmas Gift Lathe Tools More Stable】 Premium Cnc Machined From 1/2 Inch Square Stainless Steel, Which Is More Stable, Stiffer And Not Easy To Roll Than Round Shaft Tools. Offers Two Alloy Handles, Adjustable Length, Convenient And Efficient.Where You Can Fill Sand Into The Bottom One To Increase Counterweight And Stability For This Expandable Tool Handle..
Features
- Upgraded High-quality Turning Tools,handle And Connector Are Removable And Adjustable High-density tungsten carbide cutting heads are made with high-speed steel blade material which will not wear off easily. 2*Aluminum alloy detachable handle and connector, can be replaced or disassembled freely, saving a lot of money(other turning tools only have 1 non-replaceable connector, damage will not work).Aluminum alloy handle is sandblasted and anodized by electroplating, better feel for processing.
- Christmas Gift Lathe Tools More Stable Premium CNC machined from 1/2 inch square stainless steel, which is more stable, stiffer and not easy to roll than round shaft tools. Offers two alloy handles, adjustable length, convenient and efficient.where you can fill sand into the bottom one to increase counterweight and stability for this expandable tool handle.
- Indexable Cutter Design Indexable carbide cutter inserts can be rotated or replaced ,once the edge is blunt, you can always rotate the cutter head to get a new sharper edge.
- Versatile And Beautiful Utility turning tools for bowl gouge turning pens pepper mills spindles and lots more woodturning projects of all sizes. The black and blue coating can pleasing while practically adding friction. Great for woodworkers, woodturners of all skill levels. Perfect gift for woodworkers, engineers and DIY enthusiasts.
- 0ur Turning System Includes Roughing tool*1, Finishing tool*1, Detailer tool*1, Gooseneck Hollower tool*1,11-inch handles*2, aluminum alloy handle connector*1, 2 T15 wrenches, all in one In aluminum alloy display box.
- See more on Amazon...
Brand: Feotvo | Manufacturer: Feotvo03
See On Amazon #19
DDWT 300mm /11.8inch Round Center Finder Compass for Wood Turners Lathe Work Clear Acrylic Drawing Circles Diameter
Asin: B07XRBB1KF | Model: DD220326 | PartNumber: DD220326 | Ean: 0610825031839 | UPC: 610825031839
Made From Clear, Fully Transparent Acrylic With A Center Hole And Clearly Marked Circles In 5Mm Increments.
The Lathe Center Finder Works On Wood, Poster Board, Plastic, Metal, Glass, Composites And More! Center Finder Compass Is Perfect For Wood Turners, Arts,Crafts, School Projects, Rough And Finish Carpenters Or Use It Anywhere You Need To Draw A Circle.
The Circle Center Finder Tool Helps Produce Maximum Yield On Logs Smaller Than 300Mm In Diameter.
Finding The Center Of Irregular Shapes To Optimize Yield Is Simple And Easy.
Features
- This center finder is perfect for laying out bowls, trays and platters
- Finding the center of irregular shapes to optimize yield is simple and easy
- Made from clear, fully transparent acrylic with a center hole and clearly marked circles in 5mm increments
- The circle center finder tool helps produce maximum yield on logs smaller than 300mm in diameter
- The lathe center finder works on wood, poster board, plastic, metal, glass, composites and more! Center Finder Compass is perfect for wood turners, arts,crafts, school projects, rough and finish carpenters or use it anywhere you need to draw a circle
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
See On Amazon
Looking For Something Else?
Search