Best threading taps - Buying Guide
Last Updated: 05/09/2024
Share on
Bestselling threading taps on Amazon
- AUTOTOOLHOME 6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 1...
- 5-Piece NPT Pipe Tap Set, 1/8", 1/4", 3/8", 1/2", 3/4" NPT Tap Set Carbon Steel Hand Threading Pl...
- 5-Piece NPT Pipe Tap Set, Precision Carbon Steel NPT Tap Set for Clean Accurate Threads, 3/4", 1/2",...
- Anfrere 40pcs Metric Tap and Die Set, Metric Standard Rethreading Tool Kit, Coarse and Fine Threads ...
- Saipe 10pcs Micro Taps Bit Small Hand Screw Thread Taps M1-M3.5 HSS Mini Metric Plug Tap Screw Tap D...
- AUTOTOOLHOME Titanium Combination Drill Tap Bit Set 13PCS SAE and Metric Tap Bits Kit for Screw Thre...
- Drill America 1/4"-20 UNC High Speed Steel Tap Set
- HORUSDY 6-Piece NPT Pipe Tap Set, Sizes Includes 1/8", 1/4", 3/8", 1/2", 3/4" and 1"
- Yakamoz 10pcs Micro Taps Bits Mini Machine Screw Drill Tap Set Metric Thread Screws Plug Bit Small T...
- WYNNsky Die and Tap Set in SAE and Metric, Hex Threading Dies for External Threads, Thread Tap for I...
#1
AUTOTOOLHOME 6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC
Asin: B088T7LP2C | Model: 02426001 | PartNumber: 02426001
This Tap Set Includes Sae , So It Has High Versatility. Each Tap Drill Is Engraved With A Label, Which Is Convenient For You To Choose The Size That Suits You. The Convenient ¼-Inch (6.35Mm) Quick Change Hex Shank Has A Tapered End To Prevent Excessive Knocks. Back Taper Exceeds The Tap To Prevent Over-Drilling And Damage To The Thread..
Storage Case Is Lightweight And Durable For Easy Storage And Is Portable For All Job Environments.
6Pcs Drill Tap Set Including Sae- 6-32Nc, 8-32Nc, 10-24Nc, 10-32Nc, 12-24Nc, 1/4-20Nc.
Three In One Operation Provides Hole Drilling, Tapping, Deburring And Countersinking For A Quick And Complete Job On Copper, Brass, Aluminum, Sheet Metal And Plastic.
Features
- Titanium Combination Drill taps are made of HSS 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life.
- Three in one operation provides hole drilling, tapping, deburring and countersinking for a quick and complete job on copper, brass, aluminum, sheet metal and plastic
- This tap set includes SAE , so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient -inch (6.35mm) quick change hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
- 6pcs drill tap set including SAE- 6-32nc, 8-32nc, 10-24nc, 10-32nc, 12-24nc, 1/4-20nc
- Storage case is lightweight and durable for easy storage and is portable for all job environments
- See more on Amazon...
Brand: AUTOTOOLHOME | Manufacturer: JYC International Trade Co., Ltd.
Weight: 0.00 Pounds
See On Amazon #2
5-Piece NPT Pipe Tap Set, 1/8", 1/4", 3/8", 1/2", 3/4" NPT Tap Set Carbon Steel Hand Threading Plumbing Tap Set for Accurate Threads, Assorted Plumbers Mechanics DIY Thread cutting tools
Asin: B0C7H4JQXB | Model: DKVIP-0001 | PartNumber: DKVIP-0001
Efficient Thread Cutting Tools: Featuring Precision Ground Threads, Right-Hand Cutting Type, Round Shank, Square End, And 4 Straight Flutes, These Taps Ensure Precise And Efficient Pipe Threading.
Convenient Storage: 5-Piece Npt Taps Are Neatly Organized In A Sleek Plastic Case, Which Not Only Protects Them From Rust But Also Keeps Them Well-Organized For Easy Access Whenever Needed.
Reliable Performance: The Npt Thread Design Creates A Secure And Leak-Free Connection Between Pipes Or Fittings, Offering Reliable Performance In Plumbing, Automotive, And Construction Applications.
Durable Carbon Steel Pipe Thread Tap Set: Made From High Quality Carbon Steel, This Carbon Steel Tap Set Offers Durability And Long-Lasting Performance In Cutting Internal Threads To Clean Or Re-Thread Jam Or Damaged Pipes.
Features
- Versatile Size Range: This NPT tap set includes 5 pipe fitting sizes - 1/8", 1/4", 3/8", 1/2", and 3/4" - providing versatility for various pipe threading needs; the nominal size of the National Pipe Taper taps corresponding to the size of the pipes fitting to be tapped
- Durable Carbon Steel Pipe thread tap set: Made from high quality carbon steel, this Carbon steel tap set offers durability and long-lasting performance in cutting internal threads to clean or re-thread jam or damaged pipes
- Efficient Thread Cutting Tools: Featuring Precision ground threads, Right-hand cutting type, round shank, square end, and 4 straight flutes, these taps ensure precise and efficient pipe threading
- Reliable Performance: The NPT thread design creates a secure and leak-free connection between pipes or fittings, offering reliable performance in plumbing, automotive, and construction applications
- Convenient Storage: 5-piece NPT taps are neatly organized in a sleek plastic case, which not only protects them from rust but also keeps them well-organized for easy access whenever needed
- See more on Amazon...
Brand: DKIBBITH | Manufacturer: DKIBBITH
See On Amazon #3
5-Piece NPT Pipe Tap Set, Precision Carbon Steel NPT Tap Set for Clean Accurate Threads, 3/4", 1/2", 3/8", 1/4", 1/8" NPT Tap, Perfect for Plumbers Mechanics DIYers, with Durable Plastic Case
Asin: B0C7H7TQQN | Model: DECK-2302 | PartNumber: DECK-2302
These Npt Taps Feature Precision Ground Threads In Right-Hand Cutting Type, Square End Round Shank With 4 Straight Flutes. Together, These Qualities Ensure Precise And Efficient Pipe Threading..
For Convenience, The 5-Piece Npt Taps Are Neatly Organized In A Sleek Plastic Case. This Not Only Protects Them From Rust But Also Keeps Them Well-Organized And Easily Accessible Whenever You Need A Thread Cutting Tool.
The Npt Thread Design Of This Pipe Thread Tap Set Creates A Secure And Leak-Free Connection Between Pipes Or Fittings. This Makes Them Reliable For Plumbing, Automotive, And Construction Applications.
Made From High-Quality Carbon Steel, This Durable Pipe Thread Tap Set Is Designed To Cut Internal Threads Cleanly And Efficiently. It Is Ideal For Cleaning Or Re-Threading Jammed Or Damaged Pipes.
Features
- This NPT (National Pipe Taper) tap set offers a versatile range of sizes for various pipe threading needs. It includes 5 pipe fitting sizes: 3/4", 1/2", 3/8", 1/4" and 1/8" The nominal size of the taps is the size of the pipes fitting to be tapped
- Made from high-quality carbon steel, this durable Pipe thread tap set is designed to cut internal threads cleanly and efficiently. It is ideal for cleaning or re-threading jammed or damaged pipes
- These NPT taps feature precision ground threads in right-hand cutting type, square end round shank with 4 straight flutes. Together, these qualities ensure precise and efficient pipe threading.
- The NPT thread design of this pipe thread tap set creates a secure and leak-free connection between pipes or fittings. This makes them reliable for plumbing, automotive, and construction applications
- For convenience, the 5-piece NPT taps are neatly organized in a sleek plastic case. This not only protects them from rust but also keeps them well-organized and easily accessible whenever you need a thread cutting tool
- See more on Amazon...
Brand: DECKRKAT | Manufacturer: DECKRKAT
See On Amazon #4
Anfrere 40pcs Metric Tap and Die Set, Metric Standard Rethreading Tool Kit, Coarse and Fine Threads for Cutting External and Internal Threads, Essential Repair Tool Kit with Thread Wrench
Asin: B0C3917TC1 | Model: TDK-IM80MT | PartNumber: TDK-IM80MT
Long-Lasting Material -- Constructed From Industrial Grade Hardened Gcr15 Bearing Steel For Maximum Strength And Longevity. Suitable For Cutting Steel, Copper, Aluminum, Cast Iron, And Other Materials..
All-In-One Set -- Comes With Thread Gauge, Tap Handle, Die Handle, Small Tap Chuck, And A Carrying Case For Your Convenience. Easy To Assemble And Operate..
Efficient And Precise -- All Cutting Teeth Are Precisely Cnc Machined And Accurately Heat Treated To Reach Hardness 60 Hrc For Best Threading Performance..
Features
- RETHREADING SET -- Professional standard and metric tap die rethread tool kit for cutting or updating of internal and external threads on fasteners or fastener holes. The taps can also be used to remove broken screws.
- EFFICIENT AND PRECISE -- All cutting teeth are precisely CNC machined and accurately heat treated to reach hardness 60 HRC for best threading performance.
- LONG-LASTING MATERIAL -- Constructed from industrial grade hardened GCr15 bearing steel for maximum strength and longevity. Suitable for cutting steel, copper, aluminum, cast iron, and other materials.
- ALL-IN-ONE SET -- Comes with thread gauge, tap handle, die handle, small tap chuck, and a carrying case for your convenience. Easy to assemble and operate.
- See more on Amazon...
Brand: Anfrere | Manufacturer: Anfrere
Dimensions: 1.54 x 12.40 x 7.68 inches | Weight: 2.87 pounds
See On Amazon #5
Saipe 10pcs Micro Taps Bit Small Hand Screw Thread Taps M1-M3.5 HSS Mini Metric Plug Tap Screw Tap Drill Tap Drill Set Tapping tool with Adjustable Tap Wrench 1/16-1/4''
Asin: B0B38WRV9P | Model: QYMGMD0475 | PartNumber: QYMGMD0475
【Adjustable Tap Wrench】 M1-M8 (Mertic)/ 1/16" - 1/4"(Unc/Unf) / 2Mm-7Mm, Designed To Be Used With Taps Or Reamers, Handles Are Long To Provide More Leverage Than T-Handle Wrenches.
【Application】Used For Machining Nuts Or Other Common Threads, Great Set Of Taps For Small Crafts. Suitable For Processing Soft Metal Like Aluminum And Thin Steel, Wood And Plastic, Etc.
【Excellent Design】Standard Metric Thread Design, Sharp And Cut Accurate, No Burr, Provide Rapid Chip Removal For Efficient Threading And Smooth Tapping.
【10Pcs Metric Tap Size】 M1 X 0.25, M1.2 X 0.25, M1.4 X 0.3, M1.6 X 0.35, M1.7 X 0.35, M1.8 X 0.35, M2 X 0.4, M2.5 X 0.45, M3 X 0.5, M3.5 X 0.6.
Features
- Material The small taps are made of high speed steel (HSS6542), high hardness, anti-rust, has excellent for capability and durability
- 10pcs Metric Tap Size M1 x 0.25, M1.2 x 0.25, M1.4 x 0.3, M1.6 x 0.35, M1.7 x 0.35, M1.8 x 0.35, M2 x 0.4, M2.5 x 0.45, M3 x 0.5, M3.5 x 0.6
- Adjustable Tap Wrench M1-M8 (Mertic)/ 1/16 - 1/4(UNC/UNF) / 2mm-7mm, designed to be used with taps or reamers, handles are long to provide more leverage than T-Handle wrenches
- Excellent Design Standard metric thread design, sharp and cut accurate, no burr, provide rapid chip removal for efficient threading and smooth tapping
- Application Used for machining nuts or other common threads, great set of taps for small crafts. Suitable for processing soft metal like aluminum and thin steel, wood and plastic, etc
- See more on Amazon...
Brand: Saipe | Manufacturer: Saipe
See On Amazon #6
AUTOTOOLHOME Titanium Combination Drill Tap Bit Set 13PCS SAE and Metric Tap Bits Kit for Screw Thread Drilling Tapping Deburring Countersinking
Asin: B09HCC1G8K
Drill, Tap, Deburr And Countersink In One Quick And Easy Action,And Complete Job On Copper, Brass, Aluminum, Sheet Metal ,Mild Steel And Plastic.Work Completely, Greatly Save Processing Steps And Time Costs, And Improve Work Efficiency..
Included Convenient Swivel Storage Case,Swivel Feature Props Up Tap Drill Bits And Securely Holds Them In Place Until Ready To Use. The Storage Case Folds Up Neatly And Is Convenient To Travel With On Different Job Sites And Locations..
Each Drill Tap Bit Is Engraved With The Right Size, Which Is Convenient For You To Choose The Size That Suits You. Strong Hex Shank Ensures Strong Connection To Drill.A Tapered End To Prevent Excessive Knocks. Back Taper Exceeds The Tap To Prevent Over-Drilling And Damage To The Thread..
13Pcs Drill Tap Kit Include Sae And Metric Sizes, Suitable For Most Commonly Used Screw Tapping.Sae Included 6-32Nc, 8-32Nc, 10-24Nc, 10-32Nc, 12-24Nc And 1/4-20Nc,Metric Included M3 X 0.5, M4 X 0.7, M5 X 0.8, M6 X 1.0, M8 X 1.25, M10 X 1.5 , Includes Storage Case And Quick Change Adapter For Easy Bit Switching.
Features
- Titanium Combination Drill tap bits are made of high speed steel 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life.
- 13pcs drill tap kit include SAE and metric sizes, Suitable for most commonly used screw tapping.SAE Included 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC,Metric included M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 , Includes storage case and quick change adapter for easy bit switching
- Drill, tap, deburr and countersink in one quick and easy action,and complete job on copper, brass, aluminum, sheet metal ,mild steel and plastic.work completely, greatly save processing steps and time costs, and improve work efficiency.
- Each drill tap bit is engraved with the right size, which is convenient for you to choose the size that suits you. Strong hex shank ensures strong connection to drill.a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
- Included convenient swivel storage case,Swivel feature props up tap drill bits and securely holds them in place until ready to use. The storage case folds up neatly and is convenient to travel with on different job sites and locations.
- See more on Amazon...
Brand: AUTOTOOLHOME | Manufacturer: JYC International Trade Co., Ltd.
Dimensions: 3.90 x 4.50 x 1.30 inches | Weight: 0.50 Pounds
See On Amazon #7
Drill America 1/4"-20 UNC High Speed Steel Tap Set
Asin: B00FXJVFLQ | Model: DWT54460 | PartNumber: DWT54460 | Ean: 0887861071512 | UPC: 887861071512
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #8
HORUSDY 6-Piece NPT Pipe Tap Set, Sizes Includes 1/8", 1/4", 3/8", 1/2", 3/4" and 1"
Asin: B0998HX8N8 | Model: 6 | PartNumber: 6
Npt Pipe Taps Sizes Includes:1/4"-18 Npt, 3/8"-18 Npt, 1/2"-14 Npt, 3/4"-14Npt, 1"-11.5Npt. Equipped With Special Storage Box..
Uncoated Tools Have Only The Base Material And Do Not Need Any Additional Treatment Or Coating, So They Can Be Widely Used..
Round Shank, Square End. Straight Flute Tools Allow Chips To Collect In The Flutes As They Cut And Are Well Suited For Most Applications In Shallow Cuts..
Right-Hand Cutting Tool Has A Clockwise Cutting Function..
Features
- Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads.
- Right-hand cutting tool has a clockwise cutting function.
- NPT Pipe taps sizes includes:1/4-18 NPT, 3/8-18 NPT, 1/2-14 NPT, 3/4-14NPT, 1-11.5NPT. Equipped with special storage box.
- Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
- Uncoated tools have only the base material and do not need any additional treatment or coating, so they can be widely used.
- See more on Amazon...
Brand: HORUSDY | Manufacturer: HORUSDY
Dimensions: 2.20 x 9.60 x 6.20 inches
See On Amazon #9
Yakamoz 10pcs Micro Taps Bits Mini Machine Screw Drill Tap Set Metric Thread Screws Plug Bit Small Tapping Bits Tool
Asin: B08Z3TVFSZ | Model: GY0467 | PartNumber: GY0467
With These Machine Hand Taps, You Will Have A Smooth Tapping Experience..
Made Of Hss6542 High-Speed Steel Which Is Durable, High Wear, Heat Resistanceand For Long Life Use..
These Micro Taps Mainly Used For Clocks And Watches, And Low Hardness Of Wood And Soft Metal Hole Processing..
Standard Metric Thread Design, Clear And Tidy, No Burr, Provide Rapid Chip Removal For Efficient Threading..
Features
- 10 Different Sizes: M1, M1.2, M1.4, M1.6, M1.7, M1.8, M2, M2.5, M3, M3.5 (coarse thread) for tapping various threads.
- Standard metric thread design, clear and tidy, no burr, provide rapid chip removal for efficient threading.
- With these machine hand taps, you will have a smooth tapping experience.
- These micro taps mainly used for clocks and watches, and low hardness of wood and soft metal hole processing.
- Made of HSS6542 high-speed steel which is durable, high wear, heat resistanceand for long life use.
- See more on Amazon...
Brand: YAKAMOZ | Manufacturer: Yakamoz
Dimensions: 0.16 x 4.72 x 2.95 Inches
See On Amazon #10
WYNNsky Die and Tap Set in SAE and Metric, Hex Threading Dies for External Threads, Thread Tap for Internal Threads, Thread Wrench, Thread Pitch Gauge, 86 Pieces Gauge Kit for DIY Tapered
Asin: B09YLWBMWR | Model: TH1075A | PartNumber: TH1075A
Thread Pitch Gauge: Thread Pitch Gauges Are Used As A Reference Tool In Determining The Pitch Of A Thread That Is On A Screw Or In A Tapped Hole. This Tool Is Not Used As A Precision Measuring Instrument, Rather It Allows The User To Determine The Profile Of The Given Thread And Quickly Categorize The Thread By Shape And Pitch..
Material: Taps And Dies Are Used To Cut Metals And Are Typically Made Of High-Speed Steel Or Hardened Carbon Steel, With The Former Is Much More Robust And Used For A Broader Range Of Material. These Cutting Materials Are Suitable For Threading Steel, Cast Steel, Cast Iron, Non-Ferrous Metals, Plastics, Softwood, And Hardwood..
T Handle Tap Wrench: T Handles Hold The End Of A Tap To Provide Extra Leverage For Hand Tapping Making Them Very Useful For Confined Spaces Or Where Extra Reach Or Leverage Is Required. T Handle Tap Wrenches May Also Be Used With Screw Extractors, Drills, And Other Tools..
Application: Taps And Dies Are Metal Threading Tools Used To Cut And Restore Internal And External Threads Precisely. A Tap Is Used To Form The Female Component Of The Assembly, As In The Case Of A Nut Or Socket, A Die Is Used On The Male Component, As In A Screw Or Bolt. In Other Words, A Tap Is Used To Create The Internal Threads In A Hole For Use With A Threaded Fastener And A Die Is Used To Make Or Repair External Threading On A Round Rod, Screw, Or Bolt..
Features
- Threading Dies and Tap Size: Metric Size M3 0.5, M4 0.7, M5 0.8, M6 1.0, M7 1.0, M8 1.0, M8 1.25, M9 1.25, M10 1.25, M10 1.5, M11 1.25, M11 1.5, M12 1.5, M12 1.75, M14 1.5, M14 2.0, M16 1.5, M16 2.0; SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF.
- Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt.
- Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch.
- T Handle Tap Wrench: T Handles hold the end of a tap to provide extra leverage for hand tapping making them very useful for confined spaces or where extra reach or leverage is required. T Handle Tap wrenches may also be used with screw extractors, drills, and other tools.
- Material: Taps and dies are used to cut metals and are typically made of high-speed steel or hardened carbon steel, with the former is much more robust and used for a broader range of material. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous metals, plastics, softwood, and hardwood.
- See more on Amazon...
Brand: WYNNsky | Manufacturer: WYNNsky
Dimensions: 2.00 x 15.00 x 10.00 inches
See On Amazon #11
5 Piece NPT Thread Forming Taps, Pipe Taps Set, High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads, Size 1/8", 1/4", 3/8", 1/2", 3/4" in Storage Box
Asin: B085T4RP4C | Model: pipe-taps | PartNumber: pipe-taps | Ean: 0194999183353 | UPC: 194999183353
Versatile Set Suitable For Both Personal And Professional Use. Clean And Re-Thread Damaged Or Jam Pipe Threads With Ease - Ideal For Pipe Fittings, Diyers, Handymen, And Professionals Who Need To Repair Damaged Pipe Threads. Revive Damaged Pipe Threads With Precision Using Our 5-Piece High-Speed Steel Npt Pipe Taps Set..
Uncoated Tools For Versatile Use: Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings. Our Uncoated Pipe Taps Set Are Suitable For A Wide Range Of Applications, And The Straight Flute Design Allows Chips To Collect In The Flutes As They Cut..
Npt And Bsp Available - Perfect For Cuts Internal Threads In Pipes. Durable And Harder Than Carbon Steel - Our Gcr15 Material Makes All The Difference. With A Round Shank And Square End, Our Pipe Taps Are Well-Suited For Most Applications In Shallow Cuts. Upgrade Your Pipe Threading Game Today With Our Composite Steel Pipe Taps Set..
Tool Storage Box: The 5-Piece Set Includes All The Sizes You Need For Clean And Re-Threading Damaged Or Jam Pipe Threads, And The Storage Box Makes For Easy Organization And Transport. Includes Size Of: 1/8" - 27 Npt, 1/4" - 18 Npt, 3/8" - 18 Npt, 1/2" - 14 Npt, 3/4" - 14 Npt.
Features
- Durable materials: Upgrade Your Pipe Threading game with Our Composite Steel Pipe Taps Set. Ditch your old, carbon steel pipe taps and upgrade to our composite steel (GCR15) pipe taps set. With a higher hardness level than traditional carbon steel, our pipe taps are more durable and long-lasting.
- Tool Storage Box: The 5-piece set includes all the sizes you need for clean and re-threading damaged or jam pipe threads, and the Storage Box makes for easy organization and transport. Includes size of: 1/8 - 27 npt, 1/4 - 18 npt, 3/8 - 18 npt, 1/2 - 14 npt, 3/4 - 14 npt
- Versatile set suitable for both personal and professional use. Clean and Re-Thread Damaged or Jam Pipe Threads with Ease - Ideal for Pipe Fittings, DIYers, handymen, and professionals who need to repair damaged pipe threads. Revive Damaged Pipe Threads with Precision Using Our 5-Piece High-Speed Steel NPT Pipe Taps Set.
- NPT and BSP Available - Perfect for Cuts Internal Threads in Pipes. Durable and Harder Than Carbon Steel - Our GCR15 Material Makes All the Difference. With a round shank and square end, our pipe taps are well-suited for most applications in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set.
- Uncoated Tools for Versatile Use: Uncoated tools feature just the base substrate without any additional treatment or coatings. Our uncoated Pipe Taps Set are suitable for a wide range of applications, and the straight flute design allows chips to collect in the flutes as they cut.
- See more on Amazon...
Brand: WMAZtool | Manufacturer: WM077
Dimensions: 1.50 x 5.40 x 3.50 inches
See On Amazon #12
Drill America - DWT57129 1/4"-20 High Speed Steel 2 Flute Spiral Point Tap, DWT Series
Asin: B00BD5Q0BE | Model: DWT57129 | PartNumber: DWT57129 | Ean: 0887861075398 | UPC: 887861075398
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #13
80-Piece Premium SAE and Metric Tap and Die Set - SAE Inch Size #4 to 1/2 and Metric Size M3 to M12, with Coarse, Fine and Pipe Threads | Essential Threading Kit with Complete Handles and Accessories
Asin: B0B6ZNXBHF | Model: PT-012 | PartNumber: PT-012 | Ean: 0858574007648 | UPC: 858574007648
▲ Excellent Cutting Performance - All Cutting Teeth Are Precisely Cnc Machined And Accurately Heat Treated To Rockwell Hardness 60 Hrc For Best Threading Performance.
▲ Most Popular Sizes - Comes With: (34) Pc. Most Common Sae Standard Taps Dies 1/2, 7/16, 3/8, 5/16, 1/4, 12, #10, #8, #6, #4; (34) Pc. Most Common Metric Taps Dies M12, M10, M8, M7, M6, M5, M4, M3; Plus (12) Pc. Comprehensive Accessories Of Wrenches, Handles, Gauges, Screwdrivers And Storage Cases.
▲ Versatility And Wide Application - Perfect To Create New Threads Or Repair Damaged Threads On Most Metals Like Carbon Steel, Cast Iron, Aluminum, Brass, Copper And Stainless Steel.
▲ Premium Material And Durability - Industrial Grade Gcr15 Bearing Steel Construction For Maximum Strength And Longevity To Withstand Professional Uses And Ensure Durability.
Features
- ALL-IN-ONE SET - This is a complete tap & die set that includes all essential SAE and Metric sizes with both coarse and fine teeth, designed for all kinds of internal and external threading, rethreading or thread repairs jobs
- PREMIUM MATERIAL AND DURABILITY - Industrial grade GCr15 bearing steel construction for maximum strength and longevity to withstand professional uses and ensure durability
- EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance
- VERSATILITY AND WIDE APPLICATION - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel
- MOST POPULAR SIZES - Comes with: (34) pc. most common SAE standard taps dies 1/2, 7/16, 3/8, 5/16, 1/4, 12, #10, #8, #6, #4; (34) pc. most common Metric taps dies M12, M10, M8, M7, M6, M5, M4, M3; plus (12) pc. comprehensive accessories of wrenches, handles, gauges, screwdrivers and storage cases
- See more on Amazon...
Brand: EFFICERE | Manufacturer: UPHILL MERCHANDISE LLC
Dimensions: 3.20 x 12.60 x 7.80 inches
See On Amazon #14
uxcell M3 x 0.5 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs
Asin: B097666SK2 | Model: a20010400ux0067 | PartNumber: a20010400ux0067
Applications: Suitable For Processing Blind Holes And Sticky Materials. Great For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Is Easy To Cause Damage To The Tap Due To Uneven Force..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Material And Finish: High-Speed Steel Tool Is With High Hardness And Toughness For Wear Resistance, Good For General Purpose Applications. Features Nitriding Coated Surface For Rust Prevention And Long Service Life..
Features
- Tap Size: M3 x 0.5 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.
- Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #15
NEIKO 10059A Combination Drill and Tap Bit Set with Quick Change Adapter, 13 Piece, SAE (6-32NC to 1/4-20NC) and Metric Drill Bit Set (M3 to M10), Metric Tap Set
Asin: B0762HJ3GF | Model: 10059A | PartNumber: 10059A | Ean: 0816914021129 | UPC: 816914021129
Versatile Countersinking Drill-Bit Set: A Must For Any Drill, This Set Contains 6 Sae Drill Bits, 6 Metric Drill Bits, And A Quick-Change Adapter. The Bits Can Drill Through A Wide Variety Of Materials, Including Sheet Metal, Plastic, Copper, And More..
Convenient Plastic Case: The Rugged Molded Plastic Case Is Lightweight And Durable For Easy Storage And Organization. The Swivel Feature Holds The Bits Securely In Place For Fast Changes..
High-Quality Drill Tap Set: Each Piece In This Bit Kit Is Made From Durable High-Speed Steel. The Steel Construction Ensures Sharp, Fast Execution With Superior Performance And Minimal Wear And Tear..
1/4-Inch Hex Shank: Each Bit Features A Convenient 1/4-Inch Hex Shank With A Tapered End To Prevent Overtapping And Minimize Oversized Holes. This Tap Drill-Bit Set Also Includes A Quick-Change Adapter For Effortless Bit Changes..
Features
- 3-IN-1 METRIC DRILL BIT SET: This innovative drill and tap set does three jobs in one, adding speed and efficiency to any job. Each bit piece provides hole drilling, tapping, and countersinking for a quick and complete job.
- 1/4-INCH HEX SHANK: Each bit features a convenient 1/4-inch hex shank with a tapered end to prevent overtapping and minimize oversized holes. This tap drill-bit set also includes a quick-change adapter for effortless bit changes.
- VERSATILE COUNTERSINKING DRILL-BIT SET: A must for any drill, this set contains 6 SAE drill bits, 6 metric drill bits, and a quick-change adapter. The bits can drill through a wide variety of materials, including sheet metal, plastic, copper, and more.
- HIGH-QUALITY DRILL TAP SET: Each piece in this bit kit is made from durable high-speed steel. The steel construction ensures sharp, fast execution with superior performance and minimal wear and tear.
- CONVENIENT PLASTIC CASE: The rugged molded plastic case is lightweight and durable for easy storage and organization. The swivel feature holds the bits securely in place for fast changes.
- See more on Amazon...
Brand: NEIKO | Manufacturer: Neiko
Weight: 0.00 pounds
See On Amazon #16
1/8 27 NPT Tapered Pipe Thread Tap High Speed Steel Pipe Thread Tap
Asin: B088R9N78K | Ean: 8424514860653
The Blade Is Ground With High Density, Sharper, Stable Cutting, High Hardness And Wear Resistance..
High-Speed Steel Tools Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Uncoated Tools Only Have A Basic Substrate, Without Any Additional Treatment Or Coating, Suitable For A Wide Range Of Applications..
Straight Groove Design, Smooth Chip Discharge, Not Easy To Form Chip Accumulation..
Features
- Using high-quality high-speed steel M2, vacuum heat treatment, can be used to process stainless steel, carbon steel, 48 steel, mold steel, etc.
- Straight groove design, smooth chip discharge, not easy to form chip accumulation.
- The blade is ground with high density, sharper, stable cutting, high hardness and wear resistance.
- Uncoated tools only have a basic substrate, without any additional treatment or coating, suitable for a wide range of applications.
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- See more on Amazon...
Brand: LingGan | Manufacturer: LingGan
Dimensions: 0.43 x 2.13 x 0.43 inches | Weight: 0.04 pounds
See On Amazon #17
6-pc 8-32NC Combination Drill Tap Bit Set SAE, 8-32NC Thread Size, Titanium Coated High-Speed Steel, Ideal for Drilling Threading and Countersinking in Soft Metal Wood and Plastic, 1/4 Hex Shank
Asin: B0CKTRR28F
Handy Tools – These Drill Tap Bits Are Must Have If You Fabricate A Lot; You Can Use The In Aluminum, Plastic, Steel, And So On; They're Sharp, And Easy To Use; Go Slow, Once The Tap Is Doing Its Thing, Make Sure Not To Strip The Threads By Bottoming It Out.
Worry-Free – This Drill Tap Bits Set Comes With A Portable Storage Case For Convenient Use And Store. If You Encounter Any Problems In Using The Products, Please Feel Free To Contact Us For Satisfactory Customer Service.
Easy To Use - Each Tap Drill Is Engraved With Its Size Convenient For You To Choose The Suitable Size With A Glance. A Tapered End On Hex Shank Can Prevent Excessive Knocks; Back Taper Exceeds The Tap To Prevent Over-Drilling And Damage To The Thread.
High Versatility – Set Of 6 Drill Tap Bits Sae Sizes，8-32Nc, With 1/4Inch Hex Quick-Change Shank, Fit Electric Hand Drill, Impact Drill, Bench Drill, Electric Screwdriver And Other Tap Machines.
Features
- COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble
- HIGH VERSATILITY Set of 6 drill tap bits SAE sizes 8-32NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines
- HANDY TOOLS These drill tap bits are must have if you fabricate a lot; you can use the in aluminum, plastic, steel, and so on; They're sharp, and easy to use; Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out
- EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks; Back taper exceeds the tap to prevent over-drilling and damage to the thread
- WORRY-FREE This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service
- See more on Amazon...
Brand: DKIBBITH | Manufacturer: DKIBBITH
See On Amazon #18
GMTOOLS 40PCS Tap and Die Set, Metric Size Standard M3 to M12, Threading Tool Set for Cutting External and Internal Threads with Adjustable Handles, Complete Accessories and Storage Case
Asin: B0BRKPBCHK | Model: TDS-40PCS | PartNumber: TDS-40PCS
[Versatility]: Tapered Teeth Design Starts Threading More Easily And Smoothly, And Prevents Over-Threading. Suit For Creating New Threads Or Repairing Damaged Threads On Metals Like Carbon Steel, Cast Iron, Aluminum And Stainless Steel..
[Portable Case]: Each Tap And Dies Set Is Equipped With A Plastic Toolbox Which Is Engraved With Corresponding Scales. And It’S Convenient To Store Them In The Case To Prevent Dust..
[Common Sizes In Metric]: 17 Dies & Taps: M3-M12; Npt Dies & Taps: 1/8-27; (1)Screw Pitch Gauge (1) Screwdriver (1) "T" Handle Tap Wrench (1) Tap Wrench (1)Die Wrench Handle (1) Die Winch.
[Excellent Performance]: Suitable For Re-Threading Fasteners And Fastener Holes, Cutting Or Updating Internal And External Threads. Fully Ground & High-Precision Tap Is Sharp For Tapping And Chip Removing Operation, Running Smoothly And Efficiently..
Features
- [High-Quality Materials]: This metric tap set is made of high-quality hardened alloy steel, improving product hardness, wear-resistance, and increasing product service life, durable and superior strength.
- [Excellent Performance]: Suitable for re-threading fasteners and fastener holes, cutting or updating internal and external threads. Fully ground & high-precision tap is sharp for tapping and chip removing operation, running smoothly and efficiently.
- [Versatility]: Tapered Teeth Design starts threading more easily and smoothly, and prevents over-threading. Suit for creating new threads or repairing damaged threads on metals like carbon steel, cast iron, aluminum and stainless steel.
- [Common Sizes in Metric]: 17 Dies & Taps: M3-M12; NPT Dies & Taps: 1/8-27; (1)Screw Pitch Gauge (1) SCREWDRIVER (1) T HANDLE TAP WRENCH (1) Tap wrench (1)Die Wrench Handle (1) Die Winch
- [Portable Case]: Each tap and dies set is equipped with a plastic toolbox which is engraved with corresponding scales. And it s convenient to store them in the case to prevent dust.
- See more on Amazon...
Brand: GMTOOLS | Manufacturer: GMTOOLS
See On Amazon #19
Yakamoz 9pcs Machine Screw Tap Set Titanium Spiral Flute Drill Taps Metric M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Thread Tapping Tool
Asin: B08Z3LDLYZ | Model: GY0466 | PartNumber: GY0466
Spiral Tap The Crumbs Into A Spiral Up Chip Evacuation, It Is More Suitable For The Processing Of Blind Holes And Not Easily Broken Tap..
High Speed Steel 6542 Material Suitable For Drilling Tapping Cutting On Light Metal Aluminum Board, Iron Plate, Ordinary Stainless Steel And Other Hard Materials. (Not Hss4241 Material).
Made From High Speed Steel 6542 With Titanium Coating For High Wear And Heat Resistant, Durable And Has Long Service Life..
Designed To Cut Threads For Standard-Sized Screws, Clear And Tidy, No Burr, Provide Rapid Chip Removal For Efficient Threading..
Features
- Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12
- Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading.
- Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap.
- Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life.
- High speed steel 6542 material suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (Not HSS4241 Material)
- See more on Amazon...
Brand: YAKAMOZ | Manufacturer: Yakamoz
Dimensions: 0.43 x 5.51 x 3.15 inches
See On Amazon #20
KR L | 3/8-24 UNF HSS-M2 | Hand Threading Taps | Set of 3 Tools: Tapper Plug Bottom | High Production
Asin: B0D2DWV83H | Model: 10-400-009 | PartNumber: 10-400-009
Król Progressive Threading Process: Our Manual Tap Set Is Designed To Build Threads Progressively And Efficiently. It Starts With The Tapper, Initiating The Process With Fewer Threads. Then Comes The Plug, Which Increases The Thread Count, And Finally The Bottom, Completing The Thread To The Exact Measurement. This System Reduces The Required Torque, Facilitates Greater Precision, And Improves Tool Durability..
Flexibility And Adaptability With Every Turn: Król Taps Are Engineered To Conform To A Variety Of Materials And Applications. Whether You’Re Threading Soft Or Hard Metals, Our Tools Deliver Exceptional Adaptability, Ensuring Each Thread Is Cut With Utmost Precision. The Flexibility Of Our Taps Allows For A Perfect Fit And Effortless Alignment, Resulting In Consistent, High-Quality Threads With Every Use..
Superior Material For High-Production Threading: Crafted From High-Speed Steel (Hss-M2), Our Tools Are Capable Of Withstanding Higher Temperatures And Friction Than Common Tools. This Makes Them The Ideal Material For High-Production Threading, Ensuring A Prolonged Lifespan And A Superior Quality Finish..
This Progressive System Reduces The Required Torque, Facilitates Greater Precision, And Enhances The Tool’S Performance And Durability. Each Tap Features A 60° Cutting Angle And 3 Flutes For Optimal Cutting Efficiency For This Type Of Measurement.
Features
- KR L Threading Tools: Designed for a wide range of applications, our threading tools combine exceptional hardness with superior toughness, ensuring unparalleled wear resistance for general threading tasks.
- This progressive system reduces the required torque, facilitates greater precision, and enhances the tool s performance and durability. Each tap features a 60 cutting angle and 3 flutes for optimal cutting efficiency for this type of measurement
- KR L Progressive Threading Process: Our manual tap set is designed to build threads progressively and efficiently. It starts with the Tapper, initiating the process with fewer threads. Then comes the Plug, which increases the thread count, and finally the Bottom, completing the thread to the exact measurement. This system reduces the required torque, facilitates greater precision, and improves tool durability.
- Superior Material for High-Production Threading: Crafted from High-Speed Steel (HSS-M2), our tools are capable of withstanding higher temperatures and friction than common tools. This makes them the ideal material for high-production threading, ensuring a prolonged lifespan and a superior quality finish.
- Flexibility and Adaptability with Every Turn: KR L taps are engineered to conform to a variety of materials and applications. Whether you re threading soft or hard metals, our tools deliver exceptional adaptability, ensuring each thread is cut with utmost precision. The flexibility of our taps allows for a perfect fit and effortless alignment, resulting in consistent, high-quality threads with every use.
- See more on Amazon...
Brand: KRÓL | Manufacturer: KRÓL TOOLS
Amazon Price: $32.00 | as of 05/09/2024
(9:23pm pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #21
5-Piece NPT Pipe Tap Set, Carbon Steel Threading Tools for Plumbers Mechanics DIY, 1/8in, 1/4in, 3/8in, 1/2in, 3/4in with Durable Plastic Case, Perfect for Accurate Threads
Asin: B0D363X6SL | Model: Fafeicyco37tmwa9h | PartNumber: Fafeicyco37tmwa9h
Precise Threading: Npt Taps Feature Precise Ground Teeth With A Right Hand Cutting Type, Square End, And 4 Straight Slots. These Qualities Ensure The Accuracy And Efficiency Of Pipe Threading..
Organized And Protected: For Convenience, The 5 Piece Npt Pipe Taps Are Neatly Organized In A Durable Plastic Case. This Not Only Protects Them From Rust But Also Keeps Them Well Organized And Easily Accessible When You Need Threading Tools..
Secure Connections: Npt Thread Design Of This Pipe Tap Set Establishes Secure Connections Between Pipes Or Fittings. This Makes Them Reliable For Plumbing, Automotive, And Construction Applications..
Carbon Steel Construction: This Sturdy Pipe Tap Set Is Made Of Quality Carbon Steel, Designed To Clean And Efficiently Cut Internal Threads. It's An Ideal Choice For Cleaning Or Rethreading Clogged Or Damaged Pipes..
Features
- VERSATILE NPT THREADING: NPT pipe tap set offers multiple sizes to meet various pipe threading needs. It includes 5 sizes: 3/4in, 1/2in, 3/8in, 1/4in, and 1/8in. The nominal size of the faucet is the size of the pipe fitting to be tapped.
- CARBON STEEL CONSTRUCTION: This sturdy pipe tap set is made of quality carbon steel, designed to clean and efficiently cut internal threads. It's an ideal choice for cleaning or rethreading clogged or damaged pipes.
- PRECISE THREADING: NPT taps feature precise ground teeth with a right hand cutting type, square end, and 4 straight slots. These qualities ensure the accuracy and efficiency of pipe threading.
- SECURE CONNECTIONS: NPT thread design of this pipe tap set establishes secure connections between pipes or fittings. This makes them reliable for plumbing, automotive, and construction applications.
- ORGANIZED AND PROTECTED: For convenience, the 5 piece NPT pipe taps are neatly organized in a durable plastic case. This not only protects them from rust but also keeps them well organized and easily accessible when you need threading tools.
- See more on Amazon...
Brand: Fafeicy | Manufacturer: Fafeicy
See On Amazon #22
Pipe Tap Set 6Pcs Pipe Fitting Tools Tap, NPT 1in 3/4in 1/2in 3/8in 1/4in 1/8in Carbon Steel Thread Tapping Tool Kit for PVC Pipe, Hand Thread Plumbing Tap Set for Accurate Threads
Asin: B0D2XKZTJR | Model: Yosoo Health Gear5edf2zk4r6 | PartNumber: Yosoo Health Gear5edf2zk4r6
Precision Thread Cutting: The Npt Taps In This Set Feature Accuracy Ground Threads, Right-Hand Cutting, Square End Circular Shanks, And 4 Straight Grooves. These Features Work Together To Deliver Precise And Accurate Pipeline Threads, Ensuring A Professional Finish Every Time. Achieve Clean, Accurate Threads With Ease Using This Pipe Tap Kit..
Convenient Storage And Access: The 6-Piece Npt Faucets Come Neatly Organized In A Durable Plastic Storage Box, Keeping Them Protected From Rust And Corrosive. The Compact And Portable Design Of The Storage Box Allows For Easy Access To The Taps Whenever You Need Them. Stay Organized And Keep Your Thread Cutting Tools In Top Condition With This Pipe Tap Set And Its Accompanying Storage Box..
Leak-Proof Connection: With The Npt Thread Design, This Pipe Tap Set Enables You To Create Safe And Leak-Proof Connections Between Pipelines And Fittings. Whether You're Working On Pipelines, Automotive Projects, Or Building Applications, These Taps Provide A Secure And Reliable Solution For Thread Cutting. Ensure Durable And Watertight Connections With This Practical And Efficient Tool Set..
Durable And Efficient: Crafted From Carbon Steel, This Pipe Tap Set Is Built To Last And Ensures Reliable Performance. Designed To Clean And Cut Female Threads Effectively, These Taps Are Ideal For Clearing Blockages Or Rethreading Damaged Pipelines. Experience Durability And Efficiency With Each Use, Saving Time And Effort On Your Plumbing Tasks..
Features
- Versatile Pipe Tap Set: This Pipe Tap kit offers a comprehensive selection of 6 NPT taps in various sizes, including 1in, 3/4in, 1/2in, 3/8in, 1/4in, and 1/8in. With this range of sizes, you can tackle a wide array of pipeline thread requirements, making it a versatile and essential tool for any plumbing or pipe fitting project.
- Durable and Efficient: Crafted from carbon steel, this Pipe Tap set is built to last and ensures reliable performance. Designed to clean and cut female threads effectively, these taps are ideal for clearing blockages or rethreading damaged pipelines. Experience durability and efficiency with each use, saving time and effort on your plumbing tasks.
- Precision Thread Cutting: The NPT taps in this set feature accuracy ground threads, right-hand cutting, square end circular shanks, and 4 straight grooves. These features work together to deliver precise and accurate pipeline threads, ensuring a professional finish every time. Achieve clean, accurate threads with ease using this Pipe Tap kit.
- Leak-Proof Connection: With the NPT thread design, this Pipe Tap set enables you to create safe and leak-proof connections between pipelines and fittings. Whether you're working on pipelines, automotive projects, or building applications, these taps provide a secure and reliable solution for thread cutting. Ensure durable and watertight connections with this practical and efficient tool set.
- Convenient Storage and Access: The 6-piece NPT faucets come neatly organized in a durable plastic storage box, keeping them protected from rust and corrosive. The compact and portable design of the storage box allows for easy access to the taps whenever you need them. Stay organized and keep your thread cutting tools in top condition with this Pipe Tap set and its accompanying storage box.
- See more on Amazon...
Brand: Yosoo Health Gear | Manufacturer: Yosoo Health Gear
See On Amazon #23
Extrusion Metric Tap, Machine Thread Forming Tap Bit Made of Tungsten Steel with Nano Blue Coating, Perfect for Repair and Manufacture in Various Fields (M2)
Asin: B0D2RQ5M9Y | Model: Sonew36fg15dst4-11 | PartNumber: Sonew36fg15dst4-11
【Precise Design】Boasting A Standard Metric Straight Thread Design, This Machine Tap Removes Chips Quickly And Neatly, Ensuring Clear, Burr- Threading Each Time For Optimal Results..
【Wide Application】Versatile And Functional, This Thread Tap Is Ideal For A Myriad Of Applications Including Bicycle Repair, Furniture Assembly, Machinery Manufacturing, And Much More, Making It A Valuable Addition To Any Toolkit..
【Easy To Handle】Mainly Used For Machine Installation, Its Long Handle Ensures Secure Installation And The Tap Is Not Easy To Fall Off, Providing Convenient And Reliable Operation..
【Nano Blue Coating】Featuring A Nano Blue Coating, This Thread Tap Offers Added Insulation Protection And Enhanced Oxidation Resistance, Providing Additional Longevity And Performance..
Features
- STURDY MATERIAL Made of tungsten steel, this extrusion tap promises high hardness, unbeatable wear resistance, and superior resistance, guarding against premature wear and tear.
- NANO BLUE COATING Featuring a nano blue coating, this thread tap offers added insulation protection and enhanced oxidation resistance, providing additional longevity and performance.
- PRECISE DESIGN Boasting a standard metric straight thread design, this machine tap removes chips quickly and neatly, ensuring clear, burr- threading each time for optimal results.
- EASY TO HANDLE Mainly used for machine installation, its long handle ensures secure installation and the tap is not easy to fall off, providing convenient and reliable operation.
- WIDE APPLICATION Versatile and functional, this thread tap is ideal for a myriad of applications including bicycle repair, furniture assembly, machinery manufacturing, and much more, making it a valuable addition to any toolkit.
- See more on Amazon...
Brand: Sonew | Manufacturer: Sonew
See On Amazon #24
6Pcs NPT Pipe Tap Set Ideal for Cleaning or re Threading Blocked or Damaged Pipes, 1/8 27 1/4 18 3/8 18 1/2 14 3/4 14 1 11.5
Asin: B0D2LR765Z | Model: WALFRONT67908kgpxs | PartNumber: WALFRONT67908kgpxs
Wide Application: Uncoated Hss Tap Tools Have Only A Base And Do Not Require Any Additional Treatment Or Coating For A Wide Range Of Applications.
Accurate And Effective: These Npt Taps Feature Right Hand Cut Accurate Grinding Threads, Square Ended Round Shank, With Four Straight Grooves, Which Together Ensure Accuracy And Efficiency In Pipe Threading.
Chip Collection: Straight Groove Tools Allow Chips To Be Collected In The Groove During Cutting And Are Ideal For Most Applications In Shallow Cutting.
Excellent Hss: This Durable Pipe Thread Tap Set Is Made Of Excellent High Speed Steel And Is Designed To Cut Female Threads Cleanly And Efficiently. Ideal For Cleaning Or Re Threading Blocked Or Damaged Pipes.
Features
- PACKAGE INCLUDE: NPT tap set contain 1/8 27, 1/4 18, 3/8 18, 1/2 14, 3/4 14, 1 11.5 taps, each in a separate plastic box, easy for you to store and carry to use
- EXCELLENT HSS: This durable pipe thread tap set is made of excellent high speed steel and is designed to cut female threads cleanly and efficiently. Ideal for cleaning or re threading blocked or damaged pipes
- WIDE APPLICATION: Uncoated HSS tap tools have only a base and do not require any additional treatment or coating for a wide range of applications
- CHIP COLLECTION: Straight groove tools allow chips to be collected in the groove during cutting and are ideal for most applications in shallow cutting
- ACCURATE AND EFFECTIVE: These NPT taps feature right hand cut accurate grinding threads, square ended round shank, with four straight grooves, which together ensure accuracy and efficiency in pipe threading
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon #25
Burkit 2pcs M3 Spiral Point Tap, HSS Titanium coating M3 x 0.5 Spiral Point Plug Threading Tap
Asin: B0B6VS8645 | Model: M3X0.5 | PartNumber: M3X0.5
Features: Chips Are Expelled Downwards When Machining Threads, Ideal For Through-Hole And Deep Threading. With High Strength, Long Life, Fast Cutting Speed And Clear Thread..
Package Include: 2 Pcs M3x0.5Mm Spiral Point Tap..
Applications: Can Be Used For Tapping Stainless Steel (Below 30Hrc), Aluminum, Die Steel, Ordinary Steel, Non-Ferrous Metals, Hard Plastics, Etc..
Material: Manufactured By High-Temperature Quenching Of 6542 High-Speed Steel(M2), Higher Toughness And Wear Resistance. With Ti-Coated For Improving Wear And Fusion Resistance..
Features
- Cutting Diameter: 3mm, Pitch: 0.5mm, Cutting Direction: Right Hand, Accuracy Class: H2.
- Material: Manufactured by high-temperature quenching of 6542 high-speed steel(M2), higher toughness and wear resistance. With Ti-Coated for improving wear and fusion resistance.
- Features: Chips are expelled downwards when machining threads, Ideal for through-hole and deep threading. With high strength, long life, fast cutting speed and clear thread.
- Applications: Can be used for tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
- Package Include: 2 pcs M3X0.5mm Spiral Point Tap.
- See more on Amazon...
Brand: Burkit | Manufacturer: Burkit
Weight: 0.02 pounds
See On Amazon #26
Kraftek Metric(M3 - M10) 6pcs Combination Drill and Tap Bit Set, Ultra TiAlN Coating M2 Drill Tap Set for One-Step Drilling, Tapping, and Deburring
Asin: B0CNVQY3CF
Heavy-Duty Construction - Hardened High-Speed Steel Withstands Heavy-Duty Use On The Jobsite And Offers A Longer Life Than Carbon-Steel Tools.
Back-Tapered And Hex Shank: Unique Back-Tapered Design Protects Against Thread Damage From Over-Drilling, While The Sturdy Hex Shank Ensures A Strong Connection To The Drill Chuck.
Tialn Coating - With 89Hrc Surface Hardness, Harder Materials Can Be Cut And Higher Cutting Speeds Can Be Achieved..
Taps A Variety Of Material - Simplifies The Process Of Tapping Up To 10-Gauge Metal And Creates Holes In A Variety Of Materials Including Stainless Steel, Aluminum, Brass, Copper, Plastic, And Mild Steel.
Features
- 1-STEP DRILL&TAP SET - Allows you to complete hole drilling, tapping, and deburring/countersinking in one simple operation using a power drill to save time and minimize labor
- TAPS A VARIETY OF MATERIAL - Simplifies the process of tapping up to 10-gauge metal and creates holes in a variety of materials including stainless steel, aluminum, brass, copper, plastic, and mild steel
- HEAVY-DUTY CONSTRUCTION - Hardened high-speed steel withstands heavy-duty use on the jobsite and offers a longer life than carbon-steel tools
- TiAlN COATING - With 89HRC surface hardness, harder materials can be cut and higher cutting speeds can be achieved.
- BACK-TAPERED AND HEX SHANK: Unique back-tapered design protects against thread damage from over-drilling, while the sturdy hex shank ensures a strong connection to the drill chuck
- See more on Amazon...
Brand: Kraftek | Manufacturer: Kraftek
See On Amazon #27
Saipe M18 X 1.5 Metric Tap and Die Set M18 X 1.5mm HSS Straight Fluted Machine Thread Right Hand Screw Tap and Round Threading Die
Asin: B0C9Q8YW8N
Suitable For Processing Through Holes Or Shallow Holes On On Steel, Copper, Aluminum, Cast Iron And Other Materials. Can Be Used With Manual Equipment Or Special Processing Consoles, Such As Drill Presses, Tapping Machines, Cnc And Milling Machines..
Package Included: 1Pc M18 X 1.5Mm Thread Tap + 1Pc M18 X 1.5Mm Thread Die, 1.5Mm Pitch, Right Hand..
Design: Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, Debris Rapidly Discharged In The Tank. No Blocking And High Efficiency..
Round Die Material: High Quality Alloy Steel, Thread Size: M18 X 1.5; Outside Diameter (Od): 45Mm / 1.77"; Thickness: 14Mm / 0.55", Can Process, Correct Or Clean The External Threads..
Features
- Tap Material: High-Speed Steel 6542 (M2), Thread size: M18 X 1.5; Total Length: 103.5mm/4.07 , Thread Length: 31.7mm/1.24 , can make new threads or re-thread damaged or jammed threads.
- Round Die Material: High Quality Alloy Steel, Thread size: M18 X 1.5; outside diameter (OD): 45mm / 1.77; Thickness: 14mm / 0.55, can process, correct or clean the external threads.
- Suitable for processing through holes or shallow holes on on steel, copper, aluminum, cast iron and other materials. Can be used with manual equipment or special processing consoles, such as drill presses, tapping machines, CNC and milling machines.
- Design: straight flute tap provides rapid downward chip removal for efficient threading, debris rapidly discharged in the tank. No blocking and high efficiency.
- Package Included: 1pc M18 x 1.5mm Thread Tap + 1pc M18 x 1.5mm Thread Die, 1.5mm pitch, right hand.
- See more on Amazon...
Brand: Saipe | Manufacturer: Saipe
See On Amazon #28
Burkit 2pcs 1/4"-28 UNF Thread Tap Right Hand, HSS 1/4 x 28 UNF Straight Fluted Machine Tap
Asin: B0B6VQJN34 | Model: 1/4"-28 UNF | PartNumber: 1/4"-28 UNF
Technology: Straight Fluted Design, Fast Chip Removal, And No Blocking Make Your Threads Machining Faster And Easier..
Package Include: 2 Pcs 1/4"-28 Unf Tap..
Applications: Widely Used In Cast Iron, Copper, Brass, Abrasive Steel, A3 Steel, And Other Metal Materials To Process Threads..
Material: Manufactured By High-Temperature Quenching Of 6542 High-Speed Steel (M2), With Higher Toughness And Wear Resistance..
Features
- Cutting Diameter: 1/4 Inch, TPI: 28 Teeth per Inch, Cutting Direction: Right Hand, Accuracy Class: 2B.
- Material: Manufactured by high-temperature quenching of 6542 high-speed steel (M2), with higher toughness and wear resistance.
- Technology: Straight fluted design, fast chip removal, and no blocking make your threads machining faster and easier.
- Applications: Widely used in cast iron, copper, brass, abrasive steel, A3 steel, and other metal materials to process threads.
- Package Include: 2 pcs 1/4-28 UNF Tap.
- See more on Amazon...
Brand: Burkit | Manufacturer: Burkit
Weight: 0.92 Pounds
See On Amazon #29
uxcell Machine Tap #4-40 UNC UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs
Asin: B0CP46HFFC
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 3 Flutes Are Ground To Provide Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Thread Tap: Thread Size: #4-40 UNC; Class: 2B; Thread Length: 17mm / 0.67 inch; Shank Side Width: 2.4mm / 0.09 inch; Total Length: 51mm / 2.01 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #30
Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wooden Case & POU1/2NPTW/DRILL 1/2" Carbon Steel NPT Pipe Tap and 23/32" High Speed Steel Drill Bit Set
Asin: B09Z9CLFCR
Product 1: The Nominal Size Of A Pipe Tap Is That Of The Pipe Fitting To Be Tapped, Not The Actual Size Of The Tap..
Product 2: 1/2" Carbon Steel Npt Tap And 23/32" Hss Drill Bit With 1/2" Shank.
Product 2: Set Comes In Plastic Pouch.
Product 2: Carbon Steel Pipe Taps Are Designed To Clean And Or Re-Thread Damaged Or Jam Pipe Threads.
Product 2: Black Oxide Drill Bit Is Ideal For Production, Maintenance Or Portable Drilling Jobs.
Product 1: The Thread Tapers 3/4 Of An Inch Per Foot. All Pipe Taps Furnished With A 2-1/2 To 3-1/2 Thread Chamfer..
Product 1: Also Called 'Pipe Taps', National Pipe Taper (Npt) Taps Are Appropriate For Threading A Wide Variety Of Materials Both Ferrous And Non-Ferrous..
Features
- Product 1: Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
- Product 1: Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
- Product 1: The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
- Product 1: The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
- Product 2: Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads
- Product 2: Black oxide drill bit is ideal for production, maintenance or portable drilling jobs
- Product 2: 1/2 carbon steel NPT tap and 23/32 HSS drill bit with 1/2 Shank
- Product 2: Set comes in plastic pouch
- See more on Amazon...
Brand: Drill America
See On Amazon
Looking For Something Else?
Search