Best installer drill bits - Buying Guide
Last Updated: 05/10/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
HANSHAN Flexible Installer Drill Bit Fish Bit for Pulling Wire Through Tight Spaces with Minimal Damage 3/4-Inch by 54-Inch
Asin: B08MKLTN3S | Ean: 0619438664601 | UPC: 619438664601
[Anti-Slip End]:The Fish Bit Was Designed With A Three Flat Tip Shank To Prevent Slipping In Chuck.
[Dimension]:3/4-Inch Head Diameter, 1/4 Inch Shank Diameter, And Overall Length Is 54-Inch.
[Pulling Cable]: Fish Eye Hole Provided Near Tip Of Flutes To Aid In Pulling Wire Inside Wall Cavity From Either Direction After Drilling, Without Damage To The Wall.
[Flexibility]:Our Bits Are Made From High Quality Material And The Max Flex Is 90.
Features
- [Application]:This Fish Bit works great for running wire in finished ceilings and walls with minimal damage
- [Flexibility]:our bits are made from high quality material and the max flex is 90
- [Anti-slip end]:the fish bit was designed with a three flat tip shank to prevent slipping in chuck
- [Pulling Cable]: Fish eye hole provided near tip of flutes to aid in pulling wire inside wall cavity from either direction after drilling, without damage to the wall
- [Dimension]:3/4-inch head diameter, 1/4 inch shank diameter, and overall length is 54-inch
- See more on Amazon...
Brand: HANSHAN | Manufacturer: HANSHAN
See On Amazon #2
Eagle Tool US Installer Bit and Drill Bit Extension, 52-INCH - ETHX25052 (Replaces ETHX25054)
Asin: B08V9FT8X7 | Model: ETHX25052 | PartNumber: ETHX25052 | Ean: 0855376005780 | UPC: 855376005780
Custom Slip Resistant Nylon Patch Set Screws.
Made In Usa.
Three Flat Non-Slip Grip On The Chuck End.
Internal Hex For Attaching 1/4 Hex Shank In Drill Bits. Shank Diameter - 1/4", Shank Length- 52.
Features
- NEW Extensions designed to extend not only tree flat cable bits but also any 1/4-inch hex shank drill bit
- Internal hex for attaching 1/4 hex shank in drill bits. shank diameter - 1/4, shank length- 52
- Custom slip resistant nylon patch set screws
- Three flat non-slip grip on the chuck end
- Made in USA
- See more on Amazon...
Brand: Eagle Tool US | Manufacturer: Eagle Tool US
Dimensions: 0.56 x 52.00 x 0.56 inches | Weight: 0.81 pounds
Warranty: 30 day manufacturers warranty
See On Amazon #3
QZATTCAEN Flex Shank Installer Drill Bit Guide Tools/Cable Bit Bumper Balls for 3/16" Shank/in-Wall Drill Guide Kit 1-3/4" & 2-5/16" - S/4+Tool
Asin: B0BM46T8DT | Model: HT-40 | PartNumber: HT-40 | Ean: 0619438668197 | UPC: 619438668197
【Value Package】This Drill Bit Guide Kits Include: 1Pc 1-3/4" Diameter Pvc Ball, 1Pc 2-5/16" Diameter Pvc Ball, 1Pc 3/8" Stopper, 1Pc L-Shape Wrench To Adjust Stopper. Two Different Size Balls Can Be Used In Different Working Condition Base On Your Needs..
【Dimension】L Ball Dia: 2-5/16"; S Ball Dia: 1-3/4"; Stopper Width X Thickness: 3/8" X 1/8"; L-Shape Wrench Length: 3-1/8" X 3/4"..
【Materials】The Two Bumper Balls Are Made Of Pvc, And The Stopper Is Made Of Stainless Steel..
【Application】This In-Wall Drill Guide Kit Is Suitable For Using In Narrow And Long Space, Some Out Of Sight Places Within The Wall. Insert The Flex Shank Bits Into The Pvc Bumper Ball, Fasten The Stopper To Keep Ball In The Top Position, Then It Can Works..
Features
- Special Design This Flex Shank Installer Drill Bit Guide Tool kits is designed for guide the flex shank drill bit to keep straight during working.
- Application This In-Wall Drill Guide Kit is suitable for using in narrow and long space, some out of sight places within the wall. Insert the flex shank bits into the PVC bumper ball, fasten the stopper to keep ball in the top position, then it can works.
- Value Package This drill bit Guide kits include: 1pc 1-3/4 diameter PVC ball, 1pc 2-5/16 diameter PVC ball, 1pc 3/8 stopper, 1pc L-shape wrench to adjust stopper. Two different size balls can be used in different working condition base on your needs.
- Materials The two bumper balls are made of PVC, and the stopper is made of stainless steel.
- Dimension L Ball Dia: 2-5/16; S Ball Dia: 1-3/4; Stopper Width x Thickness: 3/8 x 1/8; L-Shape Wrench Length: 3-1/8 x 3/4.
- See more on Amazon...
Brand: QZATTCAEN | Manufacturer: QZATTCAEN
Weight: 0.22 pounds
See On Amazon #4
Greycore Tools 1/2 Inch x 54 Inch Flexible Drill Bit for Wire Pulling and Fishing, Auger Head Installer Drill Bit, Fish Bit for Pulling Wires in Walls (1/2" x 54" Installer)
Asin: B0CGBF881T | Ean: 0355513805278 | UPC: 355513805278
Design: Fish Eye Holes On Both Ends Of The Bit Enable Wire Pulls From Either Direction. Our 3 Flat Shank Keeps The Bit From Slipping In The Shank While The Tapered Head Design Makes For Easy Bit Retrieval..
Flexible Shank Can Maneuver In Tight Wall Spaces..
Durability – One Piece Design, Machine Sharpened Cutting Head And Screw Point Tip Work To Create A Durable Long-Lasting Bit..
Compatible With All Standard 3 Point Drill Chucks And Made To Drill Through Wood (Hardwoods, Softwoods, Plywood, Osb, Etc).
Features
- Dimensions: 1/2 x 54 wire fishing drill bit, 3/16 diameter shank, auger head
- Compatible with all standard 3 point drill chucks and made to drill through wood (hardwoods, softwoods, plywood, OSB, etc)
- Design: Fish eye holes on both ends of the bit enable wire pulls from either direction. Our 3 flat shank keeps the bit from slipping in the shank while the tapered head design makes for easy bit retrieval.
- Durability One piece design, machine sharpened cutting head and screw point tip work to create a durable long-lasting bit.
- Flexible shank can maneuver in tight wall spaces.
- See more on Amazon...
Brand: Greycore | Manufacturer: Greycore Tools
See On Amazon #5
Irwin Tools IRWIN Installer Drill Bit for Wood, Straight Shank, 18-Inch x 5/8-Inch (1890713)
Asin: B00LLI0WJY | Model: 1890713 | PartNumber: 1890713 | Ean: 0042526925528 | UPC: 042526925528
3-Flatted Shank Prevents Slipping In Drill Chuck And Includes Hole For Wire Pulling Hole Not Included On 12" Length Bits.
Premium High Carbon Steel Construction For Extended Drilling Life In Wood.
Hole In Flute For Easy Wire Pulling Through Walls, Ceilings And Floors.
Features
- 82 point for fast, smooth drilling in wood
- Hole in flute for easy wire pulling through walls, ceilings and floors
- 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling Hole not included on 12 length bits
- Premium high carbon steel construction for extended drilling life in wood
- See more on Amazon...
Brand: IRWIN | Manufacturer: IRWIN
Dimensions: 7.87 x 18.75 x 7.87 inches | Weight: 0.80 Pounds
Warranty: Warranty
See On Amazon #6
Installer Drill Bit Fish Bit for Pulling Wire Through Tight Spaces with Minimal Damage 9/16-Inch by 36-Inch 1 Pack
Asin: B0BQ9ZCGPY | Model: zt-05 | PartNumber: zt-05 | Ean: 0619438667800 | UPC: 619438667800
[Anti-Slip End]:The Fish Bit Was Designed With A Three Flat Tip Shank To Prevent Slipping In Chuck.
[Dimension]:9/16-Inch Head Diameter, 3/16 Inch Shank Diameter, And Overall Length Is 36-Inch.
[Pulling Cable]: Drill Bits Fish Eye Hole Provided Near Tip Of Flutes To Aid In Pulling Wire Inside Wall Cavity From Either Direction After Drilling, Without Damage To The Wall.
[High Quality Mtaerial]:Our Huaaliuche Installer Drill Bits Are Made From High Quality Material For Long Term Use.
Features
- [Application]:This Fish Bit works great for running wire in finished ceilings and walls with minimal damage
- [High Quality Mtaerial]:our HUAALIUCHE installer drill bits are made from high quality material for long term use
- [Anti-slip end]:the fish bit was designed with a three flat tip shank to prevent slipping in chuck
- [Pulling Cable]: Drill bits fish eye hole provided near tip of flutes to aid in pulling wire inside wall cavity from either direction after drilling, without damage to the wall
- [Dimension]:9/16-inch head diameter, 3/16 inch shank diameter, and overall length is 36-inch
- See more on Amazon...
Brand: HUAALIUCHE | Manufacturer: HUAALIUCHE
See On Amazon #7
Mixiflor Flexible Installer Drill Bit-9/16 Inch x 54 Inch, Extended Installer Drill Bit, for Pulling Wires in Confined Spaces - 1/4 Inch Shank
Asin: B0CR1GPDQW
Flexibility: It Bends, Twists, Flips And Can Be Used In Tight Spaces. Maximum Flexibility Of 90..
You Can Easily Run Metal Or Other Wires Through Wall Gaps In Any Direction Without Damaging The Wall, And The Unique Design Won't Allow Wires To Tangle Or Slip..
Wider Application: The Pointed Opening Of The Cutter Head Is Designed To Be Ideal For Laying Cables And Various Wires On Finished Walls And Ceilings..
Drill Size: The Working Part Of The Head Is 3/4" Directly, 1/4" Shank Fits Most Electric Drills, Total Length Is 54 Inches..
Features
- Black Oxide Coating: Our drills feature black oxidised coated shafts and for greater hardness, durability and rust resistance.
- Drill Size: The working part of the head is 3/4 directly, 1/4 shank fits most electric drills, total length is 54 inches.
- Flexibility: It bends, twists, flips and can be used in tight spaces. Maximum flexibility of 90.
- Wider Application: The pointed opening of the cutter head is designed to be ideal for laying cables and various wires on finished walls and ceilings.
- You can easily run metal or other wires through wall gaps in any direction without damaging the wall, and the unique design won't allow wires to tangle or slip.
- See more on Amazon...
Brand: Mixiflor | Manufacturer: Mixiflor
See On Amazon #8
MAGBIT 786.24.0416 MAG786 1/4-Inch by 24-Inch High Carbon Steel Bellhanger Drill Bit
Asin: B005M28VZ2 | Model: 786.24.0416 | PartNumber: 786.24.0416 | Ean: 0722170786095 | UPC: 722170786095
Fish Eye Hole Provided Near Tip Of Flutes To Aid In Pulling Wire.
Fish Eye Hole Provided Near Tip Of Flutes To Aid In Pulling Wire.
2 Recesses Provided To Allow For Extension Set Screws - Bits 5/8-Inch And Over.
Features
- 82 degree point for faster starts
- 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over
- Fish eye hole provided near tip of flutes to aid in pulling wire
- Fish eye hole provided near tip of flutes to aid in pulling wire
- See more on Amazon...
Brand: MAGBIT | Manufacturer: Magnus Industries Inc.
Weight: 0.10 Pounds
Warranty: Return defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.
See On Amazon #9
Irwin Tools IRWIN 1890721 Straight Shank Installer Drill Bit for Wood, 36-Inch by 3/8-Inch
Asin: B00LLHES90 | Model: 1890721 | PartNumber: 1890721 | Ean: 0042526925603 | UPC: 042526925603
3-Flatted Shank Prevents Slipping In Drill Chuck And Includes Hole For Wire Pulling Hole Not Included On 12" Length Bits.
Premium High Carbon Steel Construction For Extended Drilling Life In Wood.
Hole In Flute For Easy Wire Pulling Through Walls, Ceilings And Floors.
Features
- 82 point for fast, smooth drilling in wood
- Hole in flute for easy wire pulling through walls, ceilings and floors
- 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling Hole not included on 12 length bits
- Premium high carbon steel construction for extended drilling life in wood
- See more on Amazon...
Brand: IRWIN | Manufacturer: IRWIN
Dimensions: 7.87 x 36.73 x 7.87 inches | Weight: 1.00 pounds
See On Amazon #10
Mixiflor Flexible Installer Drill Bit-3/4 Inch x 36 Inch, Flexible Drill Bit for Wire Pulling - 1/4 Inch Shank
Asin: B0CR334CWP | Model: M-175 | PartNumber: M-175
Flexibility: It Bends, Twists, Flips And Can Be Used In Tight Spaces. Maximum Flexibility Of 90..
Wider Application: The Pointed Opening Of The Cutter Head Is Designed To Be Ideal For Laying Cables And Various Wires On Finished Walls And Ceilings..
You Can Easily Run Metal Or Other Wires Through Wall Gaps In Any Direction Without Damaging The Wall, And The Unique Design Won't Allow Wires To Tangle Or Slip..
Drill Size: The Working Part Of The Head Is 3/4" Directly, 1/4" Shank Fits Most Electric Drills, Total Length Is 36 Inches..
Features
- Black Oxide Coating: Our drills feature black oxidised coated shafts and for greater hardness, durability and rust resistance.
- Drill Size: The working part of the head is 3/4 directly, 1/4 shank fits most electric drills, total length is 36 inches.
- Flexibility: It bends, twists, flips and can be used in tight spaces. Maximum flexibility of 90.
- You can easily run metal or other wires through wall gaps in any direction without damaging the wall, and the unique design won't allow wires to tangle or slip.
- Wider Application: The pointed opening of the cutter head is designed to be ideal for laying cables and various wires on finished walls and ceilings.
- See more on Amazon...
Brand: Mixiflor | Manufacturer: Mixiflor
See On Amazon #11
EMILYPRO Flex Shank Installer Drill Bit Guide Tools/Cable Bit Bumper Balls for 1/4" Shank/in-Wall Drill Guide Kit 1-3/4" & 2-5/16" - S/4
Asin: B0876X39WV | Model: SNS-192-B0876X39WV | PartNumber: SNS-192-B0876X39WV | Ean: 0630282689039 | UPC: 630282689039
【Value Package】This Drill Bit Guide Kits Include: 1Pc 1-3/4" Diameter Wood Ball, 1Pc 2-5/16" Diameter Wood Ball, 1Pc 3/8" Stopper, 1Pc L-Shape Wrench To Adjust Stopper. Two Different Size Balls Can Be Used In Different Working Condition Base On Your Needs..
【Dimension】L Ball Dia X Bore Diameter: 2-5/16" X 1/4"; S Ball Dia X Bore Diameter: 1-3/4" X 1/4"; Stopper Width X Thickness: 3/8" X 1/8"; L-Shape Wrench Length: 3-1/8" X 3/4"..
【Materials】The Two Bumper Balls Are Made Of Solid Wood, And The Stopper Is Made Of Stainless Steel..
【Application】This In-Wall Drill Guide Kit Is Suitable For Using In Narrow And Long Space, Some Out Of Sight Places Within The Wall. Insert The Flex Shank Bits Into The Wood Bumper Ball, Fasten The Stopper To Keep Ball In The Top Position, Then It Can Works..
Features
- Special Design This Flex Shank Installer Drill Bit Guide Tool kits is designed for guide the flex shank drill bit to keep straight during working.
- Application This In-Wall Drill Guide Kit is suitable for using in narrow and long space, some out of sight places within the wall. Insert the flex shank bits into the wood bumper ball, fasten the stopper to keep ball in the top position, then it can works.
- Value Package This drill bit Guide kits include: 1pc 1-3/4 diameter wood ball, 1pc 2-5/16 diameter wood ball, 1pc 3/8 stopper, 1pc L-shape wrench to adjust stopper. Two different size balls can be used in different working condition base on your needs.
- Materials The two bumper balls are made of solid Wood, and the stopper is made of stainless steel.
- Dimension L Ball Dia x bore diameter: 2-5/16 x 1/4; S Ball Dia x bore diameter: 1-3/4 x 1/4; Stopper Width x Thickness: 3/8 x 1/8; L-Shape Wrench Length: 3-1/8 x 3/4.
- See more on Amazon...
Brand: soikoi | Manufacturer: EMILYPRO
Weight: 0.10 Pounds
See On Amazon #12
Eagle Tool US EC56272 Flex Shank Installer Drill Bit, Serrated Split Point, 9/16-Inch by 72-Inch, Made in The USA
Asin: B00IP88PQK | Model: EC56272 | PartNumber: EC56272 | Ean: 0855376005247 | UPC: 855376005247
Three Flat Non-Slip Grip On The Chuck End.
Made In The Usa.
Add A Quick Switch Hex To Adapt To A Quick Change Chuck Part Number Ethxkit187.
Flexible Spring Steel Shank With Wire Fishing Accommodation Holes In The Head And Shank.
Features
- Split Point for better starting and Serrated body for aggressive cutting
- Flexible spring steel shank with wire fishing accommodation holes in the head and shank
- Three flat non-slip grip on the chuck end
- Add a Quick Switch Hex to adapt to a Quick Change chuck part number ETHXKIT187
- Made in the USA
- See more on Amazon...
First Available: 03/12/2017
Brand: Eagle Tool US | Manufacturer: Eagle Tool US
Dimensions: 0.56 x 72.00 x 0.56 Inches | Weight: 0.63 Pounds
Warranty: 30 day manufacturers warranty
See On Amazon #13
Eagle Tool US EHS50072 Flex Shank Installer Drill Bit, Heavy Duty High Speed, 1/2-Inch by 72-Inch, Made in The USA
Asin: B00DNEH7QA | Model: EHS50072 | PartNumber: EHS50072 | Ean: 0850078004543 | UPC: 850078004543
Three Flat Non-Slip Grip On The Chuck End.
Made In Usa.
Add A Quick Switch Hex To Adapt To A Quick Change Chuck Part Number Ethxkit250.
Flexible Spring Steel Shank With Wire Fishing Accommodation Holes In The Head And Shank..
Features
- Heavy duty high speed, Split Point for better starting
- Flexible spring steel shank with wire fishing accommodation holes in the head and shank.
- Three flat non-slip grip on the chuck end
- Add a Quick Switch Hex to adapt to a Quick Change chuck part number ETHXKIT250
- Made in USA
- See more on Amazon...
First Available: 03/12/2017
Brand: Eagle Tool US | Manufacturer: Eagle Tool US
Dimensions: 0.50 x 72.00 x 0.50 Inches | Weight: 1.15 pounds
Warranty: 30 day manufacturers warranty
See On Amazon #14
SnakeBit Drill 3/8" x 18" Wood Cable Installer Drill Bit - Hollow Shank High Speed Steel Bellhanger Drill Bit - MADE IN USA
Asin: B07TJ8548S | Model: 0375SHSS | PartNumber: 0375SHSS
Patented Hollow Shank - Eliminates The Need To Pull Wire Backwards Through Walls. Allows The Installer To Install Wire In The Same Direction They Are Working.
Used By - Cable Installers, Fiber Optics Installers, Phone Companies, Security Companies, Electricians, Hdtv, Hvac, Home Owners, Diy.
Common Uses - Rg58, Rg59, Rg6, Cat5, Security Systems, Hdtv, Phone Lines, Fiber Optics, Low Voltage Electrical Wires.
100% American Made - Snakebit Drill Bits Easily Cut Through Wood, Drywall, Plaster, Plastic Steel, And Metal.
Features
- 3/8 inch by 18 inch hollow shank cable installer drill bit for installing wire in new and old construction homes
- 100% AMERICAN MADE - SnakeBit Drill Bits easily cut through wood, drywall, plaster, plastic steel, and metal
- PATENTED HOLLOW SHANK - Eliminates the need to pull wire backwards through walls. Allows the installer to install wire in the same direction they are working
- COMMON USES - RG58, RG59, RG6, Cat5, Security Systems, HDTV, Phone Lines, Fiber Optics, Low Voltage Electrical Wires
- USED BY - Cable Installers, Fiber Optics Installers, Phone Companies, Security Companies, Electricians, HDTV, HVAC, Home Owners, DIY
- See more on Amazon...
Brand: SnakeBit Drill | Manufacturer: RTJ Tool Company
See On Amazon #15
Eagle Tool US EM50072 Flex Shank Installer Drill Bit, Carbide Tip for Masonry Applications, 1/2-Inch by 72-Inch, Made in The USA, Black
Asin: B00DNEJC2C | Model: EM50072 | PartNumber: EM50072 | Ean: 0850078004680 | UPC: 850078004680
Three Flat Non-Slip Grip On The Chuck End.
Made In Usa.
Add A Quick Switch Hex To Adapt To A Quick Change Chuck Part Number Ethxkit250.
Flexible Spring Steel Shank With Wire Fishing Accommodation Holes In The Head And Shank..
Features
- Carbide tip installer bit for Masonry applications only
- Flexible spring steel shank with wire fishing accommodation holes in the head and shank.
- Three flat non-slip grip on the chuck end
- Add a Quick Switch Hex to adapt to a Quick Change chuck part number ETHXKIT250
- Made in USA
- See more on Amazon...
Brand: Eagle Tool US | Manufacturer: Eagle Tool US
Dimensions: 0.50 x 72.00 x 0.50 inches | Weight: 1.10 Pounds
Warranty: 30 day manufacturers warranty
See On Amazon #16
Diablo DIB1050 1/4 in. x 18 in. Installer Bit
Asin: B089KXDMFG | Model: DIB1050 | PartNumber: DIB1050 | Ean: 0008925153627 | UPC: 008925153627
Small Hole In Flute For Easily Pulling Wires And Cables Through Walls, Ceilings And Floors.
Maximum Performance In Cordless And Corded Drill Drivers.
Extended Length For Access In Hard To Reach Areas.
Black Oxide Coated Flutes For Fast Chip Removal.
Features
- Ultra-sharp tip for fast straight holes in clean wood or stacked lumber
- Black oxide coated flutes for fast chip removal
- Small hole in flute for easily pulling wires and cables through walls, ceilings and floors
- Extended length for access in hard to reach areas
- Maximum performance in cordless and corded drill drivers
- See more on Amazon...
Brand: Diablo | Manufacturer: Freud
Dimensions: 1.10 x 19.69 x 1.10 inches | Weight: 0.15 Pounds
See On Amazon #17
MAGBIT MAG 777 1/2 inch x 72 inch Fish Bit
Asin: B005M29JN0 | Model: 777.72.0816 | PartNumber: 777.72.0816 | Ean: 0722170777062, 7753668016144 | UPC: 722170777062
Self Feeding Screw Point.
Fish Eye Hole Provided Near Tip Of Flutes To Aid In Pulling Wire Inside Wall Cavity From Either Direction After Drilling, With No Damage To The Wall.
Drills Holes Down The Length Of Wall Cavity.
Fish Eye Holes At Both Ends.
Features
- Flexible shaft
- Fish eye holes at both ends
- Self feeding screw point
- Drills holes down the length of wall cavity
- Fish eye hole provided near tip of flutes to aid in pulling wire inside wall cavity from either direction after drilling, with no damage to the wall
- See more on Amazon...
Brand: MAGBIT | Manufacturer: Magnus Industries Inc.
Dimensions: 2.25 x 73.00 x 2.25 inches | Weight: 0.01 Pounds
Warranty: Return defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.
See On Amazon #18
YY-LC Flexible Drill Bit for Wire Pulling with Guide Ball Kit,3/4 in. x(3 FT)36 in. Long Flex Drill Bits for Wood,Flexible Auger Drill Bit for Electrical Wiring,Dirt Auger,Electrical Tools
Asin: B0CR3S7TQH
Simple Works： Hole In Top End Allows You To Pull Wire,Flexible Shaft Allows For Unique Self-Feeding Drilling And Suitable For Drilling Holes Down The Length Of A Wall And Through Hidden Studs, With No Damage To Wall Board, Plaster, Or Any Exterior Finish.
Applicable Scenario ：The Auger Drill Bit Fits Most Standard Size Power Drills ，Suit For Walls, Kitchen Counters, Sidewalks, Recessed Lighting, Camera Mounts.
Strength & Durability: Our Screw Point Installer Bit Has Ultra-Sharp Threads Which Provide Better Pulling Power And Faster Drilling Speeds. It Moves Quickly Through Obstructions To Easily Drill And Fish Wire Through Existing Walls. Rpm Rule Of Thumb: The Larger The Diameter Of The Drill Bit The Slower The Rpm (Larger Bit Grabbing And Binding ! Slow It Down And Try Again.).
Flexibility：Lexible Auger Drill Bit Has A Non-Slip Three Flat Grip,It Has Been Heat Treated For Optimum Strength And Memory,All Will Flex To Some Degree The Shorter Bits Are Not As Flexible As Longer Ones.
Features
- Material & Size 3/4"head Diameter x(3 FT)36" Long and 1/4" shank Diameter ,#65 Carbon Steel cutting head with a spring steel shank.The drill bit is of an auger type, with a self-feeding threaded tip followed by the cutting edges and the flutes for chip removal.
- Flexibility lexible auger drill bit has a non-slip three flat grip,it has been heat treated for optimum strength and memory,all will flex to some degree the shorter bits are not as flexible as longer ones
- Simple works hole in top end allows you to pull wire,flexible shaft allows for unique self-feeding drilling and suitable for drilling holes down the length of a wall and through hidden studs, with no damage to wall board, plaster, or any exterior finish
- Strength & Durability: our screw point installer bit has ultra-sharp threads which provide better pulling power and faster drilling speeds. It moves quickly through obstructions to easily drill and fish wire through existing walls. RPM rule of thumb: The larger the diameter of the drill bit the slower the RPM (Larger bit grabbing and binding ! Slow it down and try again.)
- Applicable Scenario the auger drill bit fits most standard size power drills suit for walls, kitchen counters, sidewalks, recessed lighting, camera mounts
- See more on Amazon...
Brand: YY-LC | Manufacturer: YY-LC
See On Amazon #19
Electric Screwdriver Wireless Impact Drill 18V Impact Driver Cordless, Electric Screwdriver
Asin: B0D3124PQX
Wireless Impact Drill Is Suitable For Construction Site Shelves, Maintenance, Woodworking, Etc.
18V Impact Driver Has High Torque And Stepless Speed Change Switch.
18V Electric Screwdriver Is Multi-Purpose And Has Super Power.
Electric Screwdriver Is Mainly Made Of Abs Material For A Long Time Use.
Features
- Cordless Impact Drill has Built-in dual LED lights to illuminate the work area
- Electric screwdriver is mainly made of ABS material for a long time use
- Wireless impact drill is suitable for construction site shelves, maintenance, woodworking, etc
- 18V electric screwdriver is multi-purpose and has super power
- 18V Impact Driver has High torque and stepless speed change switch
- See more on Amazon...
Brand: Lawnrden | Manufacturer: Lawnrden
Dimensions: 3.35 x 9.06 x 6.50 inches | Weight: 2.70 Pounds
See On Amazon #20
Upgraded High Hardness Magnetic Bit Set, D1 Super Strong Magnetic Drill 6Pcs Anti-Slip and Shock-Proof Bits with Screwdriver Bits(1Set) (Color : 1set)
Asin: B0D2TXF9V4 | Model: KIVIOV | PartNumber: KIVIOV | Ean: 6934864215697
【Non-Slip Serrated Blade】The Magnetic Screwdriver Bit Set Is Strongly Magnetic And Anti-Slip Tips That Make Sure That Each Edge Can Be Accurately Locked With The Screws. Say Goodbye To Screw Slippage Screw Deep Bite Effectively, Reduces Head Slippage Greatly Improve Work Efficiency..
【Widely Application】These Long Screwdriver Bits Are Compatible With Impact Drivers, Electric Screwdrivers, Manual Screwdrivers,1/4" Driver Screwdrivers, Corded Drills, Hand Screwdrivers, Electric Drills, Air Drills, Etc. The Anti-Slip Hex Bit Set Remove Broken Screws Or Drill Holes In One Step..
【Upgraded High Hardness Strong Magnetic Drill Bit】With A Variety Of Bit Lengths Included In The Set, You'll Always Have The Perfect Tool For The Job. From Delicate Tasks To Heavy-Duty Projects, Our Impact Driver Bit Set Covers All Your Daily Operational Needs..
【Impact-Resistant Design】Our D1 Anti-Slip And Shock-Proof Bits With Screwdriver Bits Are Engineered Delicate Slim Waist Design, Thin Waist Buffer Absorbs Hard Impacts From Impact Drivers, So That The Magnetic Drill Bits Has Good Impact Resistance..
Features
- Magnetic Bit Set - Durable Material These screwdriver bit set is crafted from Hardness 62HRC-High precision optimization material. This exceptional hardness ensures that the bit heads remain sturdy, even when subjected to rigorous use. The magnetic screwdriver bit set are high hardness, wear resistance and impact resistance, magnetic bits is toughness and durable to use long time.
- Impact-Resistant Design Our d1 anti-slip and shock-proof bits with screwdriver bits are engineered delicate slim waist design, thin waist buffer absorbs hard impacts from impact drivers, so that the magnetic drill bits has good impact resistance.
- Non-Slip Serrated Blade The magnetic screwdriver bit set is strongly magnetic and anti-slip tips that make sure that each edge can be accurately locked with the screws. Say goodbye to screw slippage Screw deep bite effectively, reduces head slippage Greatly improve work efficiency.
- Upgraded High Hardness Strong Magnetic Drill Bit With a variety of bit lengths included in the set, you'll always have the perfect tool for the job. From delicate tasks to heavy-duty projects, our impact driver bit set covers all your daily operational needs.
- Widely Application These long screwdriver bits are compatible with impact drivers, electric screwdrivers, manual screwdrivers,1/4 driver screwdrivers, corded drills, hand screwdrivers, electric drills, air drills, etc. The anti-slip hex bit set remove broken screws or drill holes in one step.
- See more on Amazon...
Brand: KIVIOV | Manufacturer: KIVIOV
Weight: 0.22 Pounds
See On Amazon #21
Fits Milwaukee 48-89-9257 Shockwave Impact Duty Electrical KIT (#1, 4, 9)
Asin: B0D2QNRTMJ | Ean: 0774165125211 | UPC: 774165125211
Features
- We provide you with the most durable handle in the industry, reducing early handle breakage. The TiAlN coating can help you extend the service life by 5 times, while the Rapid Strike of the stepped drill bit The tip of the drill bit and the double helix groove can accelerate the drilling speed by 2 times. Our ladder drill bit kit features # 1 1/8-1/2 ", # 4 3/16-7/8", # 9 7/8 ", and 1-1/8" ladder drill bits with laser engraving for clear stopping during size recognition.
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #22
6Pcs Combination Drill Tap Bit Set, Metric Thread M3 M10 Screw Tapping Tool, 1/4" Hex Shank Screw Taps Tool Set for Drill a Hole and Cut New Threads
Asin: B0D2NXVKTC
【Dual-Function Tool】- Not Only Do These Taps Provide The Functionality Of Drilling A Hole, But They Also Allow For Cutting New Threads Simultaneously. This Feature Saves Time And Effort, Making It An Ideal Choice For Professional And Diy Users Alike..
【Ideal For Various Applications】- Whether You're Working On Automotive Projects, Furniture Making, Or General Repairs, This Drill Tap Set Is An Essential Tool To Have In Your Workshop. Its Metric Thread Sizes Make It Compatible With A Wide Range Of Materials, Ensuring A Reliable And Consistent Performance Every Time..
【Accurate And Easy To Use】- These Taps Are Designed To Be Used On A Machine, Reducing Human Error And Ensuring More Accurate Threading Results. The 1/4" Hex Shank Makes It Easy To Attach To A Drill, Providing Versatility And Convenience In Any Work Setting..
【Easy Chip Clearance】- These Taps Are Designed With Spiral Flutes And A Chip Clearing Process That Makes For Efficient Drilling And Tapping. The Flutes Help To Remove Debris And Chips, Ensuring A Cleaner And More Accurate Threading Experience..
Features
- High-Quality Drill Tap Set - The 6pcs Metric Thread M3-M10 Coated HSS Drill and Tap Bits 1/4" Hex Shank is a professional grade tool set designed for drilling and tapping a variety of materials. Made from high speed steel and coated with durability, this set includes 6 pieces of taps in different sizes from M3 to M10, ensuring precise threading for various projects.
- Easy Chip Clearance - These taps are designed with spiral flutes and a chip clearing process that makes for efficient drilling and tapping. The flutes help to remove debris and chips, ensuring a cleaner and more accurate threading experience.
- Dual-function Tool - Not only do these taps provide the functionality of drilling a hole, but they also allow for cutting new threads simultaneously. This feature saves time and effort, making it an ideal choice for professional and DIY users alike.
- Accurate and Easy to Use - These taps are designed to be used on a machine, reducing human error and ensuring more accurate threading results. The 1/4 hex shank makes it easy to attach to a drill, providing versatility and convenience in any work setting.
- Ideal for Various Applications - Whether you're working on automotive projects, furniture making, or general repairs, this drill tap set is an essential tool to have in your workshop. Its metric thread sizes make it compatible with a wide range of materials, ensuring a reliable and consistent performance every time.
- See more on Amazon...
Brand: ALSEVENS | Manufacturer: ALSEVENS
Dimensions: 0.39 x 3.15 x 2.36 inches | Weight: 0.13 Pounds
See On Amazon #23
EGO AIT0800 8-Inch Ice Auger Bit for Drilling Holes into Ice, Compatible with Power+ Ice Auger (IG0800/IG0804) and Earth Auger (EG0800/EG0803)
Asin: B0D1V2DXXV | Model: AIT0800 | PartNumber: AIT0800 | Ean: 0195532101971 | UPC: 195532101971
7/8-Inch Connection For Quick And Easy Bit Changes.
Genuine Ego Parts Ensure Compatibility, Quality, And Performance.
Anti-Corrosion Powder Coat Finish For Long Life.
8-Inch Ice Auger Bit For Drilling Holes Into Ice.
Features
- Compatible with POWER+ Ice Auger (IG0800/IG0804) and Earth Auger (EG0800/EG0803)
- 8-inch ice auger bit for drilling holes into ice
- 7/8-inch connection for quick and easy bit changes
- Anti-corrosion powder coat finish for long life
- Genuine EGO parts ensure compatibility, quality, and performance
- See more on Amazon...
Brand: EGO Power+ | Manufacturer: EGO
Amazon Price: $110.17 | as of 05/10/2024
(11:07am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #24
6Pcs Swaging Tool Drill Bit Set Swaging Tool Drill Bit Set Pipe Expander Steel Aluminum Bearing for Copper Pipe Air Conditioner, Flaring Tool HVAC Drill Bit Sets (Hex Handle)
Asin: B0D1KRPPKX | Model: gernietcg4sq7k1d-12 | PartNumber: gernietcg4sq7k1d-12 | Ean: 7903691916809
Complete Solution: Our Swaging Tool Bit Set Provides A Complete Solution Including Pipe Expander Drill Bits And Pipe Swaging Tools To Meet All Your Needs..
Suitable For The Expansion Of Copper And Aluminum Pipes, With A Variety Of Sizes To Choose From..
This Tool Can Preserves Copper Aluminum Malleability While The Swaging, Avoiding Cracks And Leakages..
These Swaging Tool Drill Bits Are Convenient And Practical For Pipe Expansion, And A Wide Range Of Uses..
Features
- When the conditioner is installed, the copper pipe expands and connects the two copper pipes to each other.
- These swaging tool drill bits are convenient and practical for pipe expansion, and a wide range of uses.
- Complete Solution: Our swaging tool bit set provides a complete solution including pipe expander drill bits and pipe swaging tools to meet all your needs.
- This tool can preserves copper aluminum malleability while the swaging, avoiding cracks and leakages.
- Suitable for the expansion of copper and aluminum pipes, with a variety of sizes to choose from.
- See more on Amazon...
Brand: gernie | Manufacturer: gernie
See On Amazon #25
kowaku Premium Round Shank Drill Bit Set for Electric Hammer - 14mm x 180mm
Asin: B0CQRR5GPG
Heavy Duty, Suitable For Home And Business..
Made Of Steel , With Heat-Treat Process For Necessary Hardness And Durability..
Comes With Carrying Case (Each Tool Come With An Individual Case).
Round Handle Point Chisels And Flat Chisels, 14Mm Diameter, Suitable For Electric Hammer, Electric Pick..
Features
- Can be used for wall, granite, reinforced concrete, bridges and other crushing operations, as well as wall and floor cleaning operations!
- Round handle Point Chisels and Flat Chisels, 14mm diameter, suitable for electric hammer, electric pick.
- Heavy Duty, suitable for Home and Business.
- Comes with carrying case (Each tool come with an individual case)
- Made of steel , with heat-treat process for necessary hardness and durability.
- See more on Amazon...
Brand: kowaku | Manufacturer: kowaku
Weight: 0.74 Pounds
See On Amazon #26
Installer Drill Bit with Pulling Hole at Head and Tail for Wire Pulling Through Drywall and Wood Head Length 54 inch High Carbon Steel with Heat Treatment (54inch*3/4inch)
Asin: B0CWVH5K9N
[Dimensions]:3/4” X 54” Wire Fishing Drill Bit, 1/4” Diameter Shank, Auger Head With Pulling Hole At Both End For Cable To Go Through.
[Simple To Use]:Using A Good Quality Power Drill Is A Must. For Larger Diameter Bits You Will Need A Power Drill With A High Torque Rating. We Always Recommend Using Two Handles To Keep You Safe While Drilling Holes.
[Good Design]: The Fish Eye Holes On Head And Tail Of The Drill Bit ,You Can Pull Wire From 2 Direction. Three Flat Tip Shank Keeps The Bit From Slipping .Flexible Shank Make No Damage To Wall Board, Ceiling Board.
[Application]:Designed To Drill Through Wood (Hardwoods, Softwoods, Plywood,Such As Ceiling Light Installation ,Network Cable Installation.
Features
- Installer Drill Bit with pulling hole at head and tail for wire pulling through Drywall and wood head diameter 3/4 inch [Material]:the cutting head of drill bit is made of #65 Carbon Steel with a spring steel shank,and designed with a three flat tip shank to prevent slipping in usage
- [Application]:designed to drill through wood (hardwoods, softwoods, plywood,such as ceiling light installation ,Network cable installation
- [Dimensions]:3/4 x 54 wire fishing drill bit, 1/4 diameter shank, auger head with pulling hole at both end for cable to go through
- [Good design]: the Fish eye holes on head and tail of the drill bit ,you can pull wire from 2 direction. three flat tip shank keeps the bit from slipping .flexible shank make no damage to wall board, ceiling board
- [Simple to use]:Using a good quality power drill is a must. For larger diameter bits you will need a power drill with a high torque rating. We always recommend using two handles to keep you safe while drilling holes
- See more on Amazon...
Brand: Wedelweib | Manufacturer: Wedelweib
See On Amazon #27
Catgol 14mm X 180mm Round Handle And Flat Point And Flat
Asin: B0CXHST6VW
Heavy Duty, Suitable For Home And Business..
Round Handle Point And Flat , 14Mm Diameter, Suitable For Electric Hammer, Electric Pick..
Made Of Premium Steel, With -Treat Process For Necessary Hardness And Durability..
Can Be Used For Wall, Granite, Reinforced Concrete, Bridges And Other Crushing Operations, As Well As Wall And Floor Cleaning Operations!.
Features
- Comes with carrying case (Each tool come with an individual case)
- Can be used for wall, granite, reinforced concrete, bridges and other crushing operations, as well as wall and floor cleaning operations!
- Heavy Duty, suitable for Home and Business.
- Made of Premium steel, with -treat process for necessary hardness and durability.
- Round handle Point and Flat , 14mm diameter, suitable for electric hammer, electric pick.
- See more on Amazon...
Brand: Catgol | Manufacturer: Catgol
Weight: 0.74 Pounds
See On Amazon #28
Rapid Rivets High Performance Including Drill Piece, 4.8 x 20 mm, 5000391-50 Pieces
Asin: B00HB3GT1I | Model: 5000391 | PartNumber: 5000391 | Ean: 4051661013515
For Fastening Sturdy Materials To Each Other, Permanent Solution For Bonding Two Items Together.
Contents: One Pack (50 Pieces) Rapid Ø4.8 X 20 Mm High Performance Aluminium Rivets, 4.9 Mm Drill Piece, 5000391, W X H X D: 4.5 X 14 X 5 Cm, Weight: 171 G.
Robust Thanks To Steel Pin, Head Is Made Of Aluminium For Rust Resistance.
Exposed Use Thanks To Steel And Aluminium Construction, Ø4.8 X 20 Mm, Fastens A Range Of Materials From 14-16 Mm Thick, Colour Coded System For Easy Selection And Purchasing, Fits Rapid Rp10, Rp40, Rp60 And Rp100 Tools.
Features
- Rivets, 4.8 mm for professional use and for securing materials in exposed places, designed for permanent fastening of mudguards, metal and plastic coverings, signage and metal sheeting
- Exposed use thanks to steel and aluminium construction, 4.8 x 20 mm, fastens a range of materials from 14-16 mm thick, colour coded system for easy selection and purchasing, fits Rapid RP10, RP40, RP60 and RP100 tools
- For fastening sturdy materials to each other, permanent solution for bonding two items together
- Robust thanks to steel pin, head is made of aluminium for rust resistance
- Contents: One pack (50 pieces) Rapid 4.8 x 20 mm high performance aluminium rivets, 4.9 mm drill piece, 5000391, W x H x D: 4.5 x 14 x 5 cm, weight: 171 g
- See more on Amazon...
First Available: 12/13/2013
Brand: Rapid | Manufacturer: Rapid
Dimensions: 5.63 x 1.93 x 1.77 inches | Weight: 0.33 Pounds
See On Amazon #29
kwb Beam Drill 20 mm x 250 mm in Industrial Quality, Extra Long with 1-Bevel Spiral Shape for Precise Drilling
Asin: B00GR2DNBI | Model: 5118-20 | PartNumber: 5118-20 | Ean: 4009315118208
Industrial Quality: The Kwb Beam Drill Made Of Cv Steel Is Specially Designed For Use In Drilling Machines With 13 Mm Chuck And Offers A High And Offers High Quality And Durability..
1-Fase Spiral Shape: The 1-Fase Spiral Shape Of The Beam Drill In Long Allows The Drilling Dust And Chips To Be Removed Quickly And Efficiently And Provides Good Guidance For Precise Straight Running..
Precise Drilling: For A Secure Hold And Tear-Free As Well As Precise Drilling In Wooden Beams, The Drill Tip Of The Twist Drill For Wood Is Equipped With Two Pre-Cutters And A Centre Point..
Features
- EXTRA LONG: With its length of 250 mm, the wood twist drill is suitable for formwork, softwood, hardwood, lightweight construction material and plasterboard.
- PRECISE DRILLING: For a secure hold and tear-free as well as precise drilling in wooden beams, the drill tip of the twist drill for wood is equipped with two pre-cutters and a centre point.
- INDUSTRIAL QUALITY: The kwb beam drill made of CV steel is specially designed for use in drilling machines with 13 mm chuck and offers a high and offers high quality and durability.
- 1-FASE SPIRAL SHAPE: The 1-fase spiral shape of the beam drill in long allows the drilling dust and chips to be removed quickly and efficiently and provides good guidance for precise straight running.
- See more on Amazon...
Brand: kwb | Manufacturer: KWB
Dimensions: 0.79 x 11.22 x 1.97 inches | Weight: 0.77 Pounds
See On Amazon #30
Rapid Rivets High Performance Including Drill Piece, 4 x 18 mm, 5000386-50 Pieces, Silver/Blue/Clear
Asin: B00HB3GR3S | Model: 5000386 | PartNumber: 5000386 | Ean: 4051661013461
For Fastening Sturdy Materials To Each Other, Permanent Solution For Bonding Two Items Together.
Contents: One Pack (50 Pieces) Rapid Ø4 X 18 Mm High Performance Aluminium Rivets, 4.1 Mm Drill Piece, 5000386, W X H X D: 4.5 X 14 X 5 Cm, Weight: 116 G.
Robust Thanks To Steel Pin, Head Is Made Of Aluminium For Rust Resistance.
Exposed Use Thanks To Steel And Aluminium Construction, Ø4 X 18 Mm, Fastens A Range Of Materials From 12-15 Mm Thick, Colour Coded System For Easy Selection And Purchasing, Fits Rapid Rp10, Rp40, Rp60 And Rp100 Tools.
Features
- Rivets, 4 mm for professional use and for securing materials in exposed places, designed for permanent fastening of mudguards, metal and plastic coverings, signage and metal sheeting
- Exposed use thanks to steel and aluminium construction, 4 x 18 mm, fastens a range of materials from 12-15 mm thick, colour coded system for easy selection and purchasing, fits Rapid RP10, RP40, RP60 and RP100 tools
- For fastening sturdy materials to each other, permanent solution for bonding two items together
- Robust thanks to steel pin, head is made of aluminium for rust resistance
- Contents: One pack (50 pieces) Rapid 4 x 18 mm high performance aluminium rivets, 4.1 mm drill piece, 5000386, W x H x D: 4.5 x 14 x 5 cm, weight: 116 g
- See more on Amazon...
First Available: 12/13/2013
Brand: Rapid | Manufacturer: Isaberg Rapid
Dimensions: 5.63 x 1.93 x 1.77 inches | Weight: 0.22 Pounds
See On Amazon
Looking For Something Else?
Search