Best water pipe fittings - Buying Guide
Last Updated: 05/10/2024
Share on
Bestselling water pipe fittings on Amazon
- Homewerks Worldwide VACBFPZ4B Vacuum Breaker Hose Bib Backflow Preventer, 3/4 Inch, Brass
- SharkBite 1/4 Inch to 1 Inch Depth Gauge and Pipe Deburring Tool, Copper, PEX, CPVC, PE-RT, HDPE, U702A
- SHURFLO (255-313) 1/2" Twist-On Pipe Strainer
- Homewerks VFF-ASP-C19PA Anti-Siphon Frost Free Sillcock, 1/2-Inch Male Thread or 1/2-Inch Solder, 1/...
- Eastman 3/4 Inch FHT x 3/4 Inch MHT Hose Bibb Anti Siphon Vacuum Breaker, Brass Plumbing Fitting, 20199
- NDS 50, 6 In. Round Grate Drain Cover, Connects to Speed-D Catch Basin Drain,Drain Pipes & Fittings,...
- Pex Fittings 1/2 Inch, 36 PCS SUNGATOR 1/2 Inch Pex Fittings Set, 12 Each PEX Elbow Tee Coupling, 1/...
- iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass P...
- SharkBite 1/2 Inch x 25 Feet Blue PEX Pipe Flexible Water Tubing for Plumbing, PEX-B, U860B25
- Oatey Sure-Vent 1-1/2 in. 2 in. 160 Branch, 24 Stack DFU Air Admittance Valve with White PVC Sch. 40...
#1
Homewerks Worldwide VACBFPZ4B Vacuum Breaker Hose Bib Backflow Preventer, 3/4 Inch, Brass
Asin: B0046HA9S6 | Model: VACBFPZ4B | PartNumber: VACBFPZ4B | Ean: 0879420000071 | UPC: 879420000071
Compatibility: The ¾-Inch Thread Outlet Is Compatible With Most Of Standard Hose And End Valves Including Hose Bib, Sillcocks, Wall Faucets And Garden Hose..
Break-Off Screw For Permanent Attachment.
Meets Asse 1011 / Csa B64.2 Standards.
Homewerks Trusted Quality: Be Confident In The Quality And Construction Of Each And Every One Of Our Products. We Ensure That All Our Products Are Produced And Certified To Regional, National And International Industry Standards..
3/4-Inch Hose Thread Outlet.
Corrosion Resistant: Homewerks Vacuum Breaker Is A Corrosion Resistant As It Built With Durable And Reliable Brass Constructions..
Meets Ansi / Nsf 61 Low Lead Requirements.
Performance: Can Operate Into Maximum Temperature Rating Of 180º F/82º C And Maximum Operating Pressure Rating In 125 Psi. Meets Asse 1011/Csa B64.2, Meets Ansi/Nsf 61-9.
Features
- FUNCTIONALITY: Homewerks Vacuum Breaker will help prevent water backflow to the main water supply. 3/4-Inch self draining vacuum, breaker, Male hose thread
- PERFORMANCE: Can operate into maximum temperature rating of 180 F/82 C and maximum operating pressure rating in 125 Psi. Meets ASSE 1011/CSA B64.2, Meets ANSI/NSF 61-9
- COMPATIBILITY: The -Inch thread outlet is compatible with most of standard hose and end valves including hose bib, sillcocks, wall faucets and garden hose.
- CORROSION RESISTANT: Homewerks Vacuum Breaker is a corrosion resistant as it built with durable and reliable brass constructions.
- HOMEWERKS TRUSTED QUALITY: Be confident in the quality and construction of each and every one of our products. We ensure that all our products are produced and certified to regional, national and international industry standards.
- 3/4-Inch hose thread outlet
- Break-off screw for permanent attachment
- Meets ASSE 1011 / CSA B64.2 Standards
- Meets ANSI / NSF 61 low lead requirements
- See more on Amazon...
Brand: Homewerks Worldwide | Manufacturer: Homewerks
Dimensions: 1.30 x 1.60 x 1.50 inches | Weight: 0.02 pounds
Warranty: Limited Lifetime Warranty
See On Amazon #2
SharkBite 1/4 Inch to 1 Inch Depth Gauge and Pipe Deburring Tool, Copper, PEX, CPVC, PE-RT, HDPE, U702A
Asin: B000K6QFSU | Model: U702A | PartNumber: U702A | Ean: 0786714997682, 0697285914629, 0074994326019, 7147905974586, 0754262127578, 6919289905255 | UPC: 074994326019, 754262127578, 786714997682, 697285914629
Durable: Pvc Deburring Tool Is Composed Of Lightweight And Durable Plastic.
Made In The Usa: All Sharkbite Valves, Clips, Joints, And Adapters Are Manufactured And Tested In The Usa.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use.
Compatibility: Deburring Tool Is Compatible With 1/4 To 1-Inch-Sized Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes.
Features
- SHARKBITE BRASS PUSH DEPTH GAUGE AND DEBURRING TOOL: SharkBite depth gauge and pipe deburring tool is ideal for deburring the outside of a copper pipe to remove any sharp sections or burrs; marks the proper insertion depth for SharkBite plumbing fittings
- COMPATIBILITY: Deburring tool is compatible with 1/4 to 1-inch-sized PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes
- DURABLE: PVC deburring tool is composed of lightweight and durable plastic
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use
- MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 1.33 x 5.00 x 8.25 inches | Weight: 0.01 Pounds
Warranty: Lifetime
See On Amazon #3
SHURFLO (255-313) 1/2" Twist-On Pipe Strainer
Asin: B000V2W0GE | Model: 255-313 | PartNumber: 255-313 | Ean: 0752324009329 | UPC: 752324009329
Transparent Design Shows When It Is Time To Clean The Bowl.
Easy Assembly, Keeps Debris Out Of Pump, Easy To See When Strainer Needs Cleaning, 50 Mesh Stainless Steel Screen, Twist-On Water Strainer, 1/2 Inch Npsm Inlet, 1/2 Inch Npsm Outlet.
Easy Disassembly, Cleaning And Reassembly.
Screws Directly Onto The Pump Head.
Features
- SHURFLO CLASSIC SERIES STRAINER - Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump
- Screws directly onto the pump head
- Transparent design shows when it is time to clean the bowl
- Easy disassembly, cleaning and reassembly
- Easy Assembly, Keeps Debris Out of Pump, Easy to See When Strainer Needs Cleaning, 50 Mesh Stainless Steel Screen, Twist-On Water Strainer, 1/2 inch NPSM Inlet, 1/2 inch NPSM Outlet
- See more on Amazon...
First Available: 09/12/2014
Brand: SHURFLO | Manufacturer: Shurflo
Dimensions: 6.25 x 2.25 x 4.75 inches | Weight: 0.20 pounds
Warranty: Warranty
See On Amazon #4
Homewerks VFF-ASP-C19PA Anti-Siphon Frost Free Sillcock, 1/2-Inch Male Thread or 1/2-Inch Solder, 1/2-Inch inlet by inch garden hose thread outlet by 12-Inch in length
Asin: B00D4VE1MA | Model: VFF-ASP-C19PA | PartNumber: VFF-ASP-C19PA | Ean: 7466655992573, 0879420007377 | UPC: 879420007377
Corrosion Resistant: Homewerks Frost Free Sillcock Is A Corrosion-Resistant As It Constructed With Highly Forged Brass. Brass Body Construction 3/4-Inch Hose Thread Outlet.
Safety: Homewerks Sillcock Meet Asse 1019-A For Freeze-Proof Standard And Meets Asme A112.18.1/Csa B125 For Design And Performance Standard To Ensure That All Of The Products Are Produced And Certified To Regional, National And International Industry Standards..
Easy To Install: This Homewerks Frost-Free Sillcock ½ Inch Male Pipe Thread Or ½ In Solder.
Features
- PERFORMANCE: Prevents the cold weather from freezing pipes and protects against back siphoning with built-in vacuum breaker, eliminates backflow of water.
- EASY TO INSTALL: This Homewerks Frost-Free Sillcock inch male pipe thread or in solder
- CORROSION RESISTANT: Homewerks Frost Free Sillcock is a corrosion-resistant as it constructed with highly forged brass. Brass body construction 3/4-Inch hose thread outlet
- SAFETY: Homewerks Sillcock meet ASSE 1019-A for freeze-proof standard and meets ASME A112.18.1/CSA B125 for design and performance standard to ensure that all of the products are produced and certified to regional, national and international industry standards.
- See more on Amazon...
Brand: Homewerks Worldwide | Manufacturer: Homewerks
Dimensions: 3.13 x 16.75 x 2.50 inches
See On Amazon #5
Eastman 3/4 Inch FHT x 3/4 Inch MHT Hose Bibb Anti Siphon Vacuum Breaker, Brass Plumbing Fitting, 20199
Asin: B00LEMRVIW | Model: 20199 | PartNumber: 20199 | Ean: 0091712097860, 0091712201991, 0200328880890 | UPC: 091712201991, 200328880890, 091712097860
Easy To Install: Backflow Protector Features A Break-Off Screw For Permanent Installation.
Specs: Vacuum Breaker Adapter Features A 3/4 Inch Fht X 3/4 Inch Mht Connection, A Maximum Pressure Of 125 Psi, And A Temperature Of 180 Degrees F; The Screw Has A Diameter Of 3/16 Inches, A Thread Count Of 32 Per Inch, And A Length Of 1/4 Inch.
Durable: Vacuum Breaker Replacement Is Constructed Of A Heavy Duty Brass Body For Long-Lasting Reliability, And Is Corrosion Free.
Functionality: Anti Siphon Device Is Equipped With A Self-Draining Mechanism That Allows Water To Drain Upon Shut Off.
Features
- BACKFLOW PREVENTER: Vacuum breaker valve is designed to prevent the backflow of fluids back into the potable water system
- FUNCTIONALITY: Anti siphon device is equipped with a self-draining mechanism that allows water to drain upon shut off
- EASY TO INSTALL: Backflow protector features a break-off screw for permanent installation
- DURABLE: Vacuum breaker replacement is constructed of a heavy duty brass body for long-lasting reliability, and is corrosion free
- SPECS: Vacuum breaker adapter features a 3/4 inch FHT x 3/4 inch MHT connection, a maximum pressure of 125 PSI, and a temperature of 180 degrees F; the screw has a diameter of 3/16 inches, a thread count of 32 per inch, and a length of 1/4 inch
- See more on Amazon...
Brand: EASTMAN | Manufacturer: Eastman
Dimensions: 0.50 x 1.50 x 1.70 Inches | Weight: 0.00 pounds
See On Amazon #6
NDS 50, 6 In. Round Grate Drain Cover, Connects to Speed-D Catch Basin Drain,Drain Pipes & Fittings, for Small Lawns, Landscaping, and Patios,Green
Asin: B000BO6M1Q | Model: 50, 6 In. | PartNumber: 50, 6 In. | Ean: 0052063606507 | UPC: 052063606507
Works In A Variety Of Locations: Ideal For Draining Light Water Flows From Small Lawns, Landscaped Areas, Walkways And Patios.
Specifications: 28 Gpm Flow Rate, 9.1 Square In. Open Surface Area- Recommended For Pedestrians, Bicycles, And Wheelchair Traffic; Ada Compliant And Heel-Proof.
Soil-Tight Fit: Place Drain Cover On Top Of Drain Pipe Or Drain Fitting; 6 In. Round Drain Grates Come In A Variety Of Colors.
Works In A Variety Of Locations: Ideal For Draining Light Water Flows From Small Lawns, Landscaped Areas, Walkways And Patios.
Features
- BLOCK LEAVES & DEBRIS: Protect your drainage system by preventing leaves and debris from entering and potentially clogging the pipeline while letting excess surface water flow through
- WORKS IN A VARIETY OF LOCATIONS: Ideal for draining light water flows from small lawns, landscaped areas, walkways and patios
- WORKS IN A VARIETY OF LOCATIONS: Ideal for draining light water flows from small lawns, landscaped areas, walkways and patios
- SOIL-TIGHT FIT: Place drain cover on top of drain pipe or drain fitting; 6 in. round drain grates come in a variety of colors
- SPECIFICATIONS: 28 GPM flow rate, 9.1 square in. open surface area- recommended for pedestrians, bicycles, and wheelchair traffic; ADA compliant and heel-proof
- See more on Amazon...
Brand: NDS | Manufacturer: NDS Raindrip
Dimensions: 2.38 x 6.75 x 6.75 inches
See On Amazon #7
Pex Fittings 1/2 Inch, 36 PCS SUNGATOR 1/2 Inch Pex Fittings Set, 12 Each PEX Elbow Tee Coupling, 1/2" Pex Fittings For Pex Pipe, No Lead Brass, ASTM F1807
Asin: B0B7VNJ5FB
【Extra-Long Service Life】: High-Quality Brass Pex 90 Degree Elbow & Tee & Coupling, Resists Corrosion, Rust And High Temperature (32℉—200℉)..
【Compatible Products】: Use With Stainless Steel Clamp Rings Or Pex Crimp Copper Rings. (Clamp Rings Are Not Included In This Set.).
【Warm Tips】: Not Compatible With Uponor/Wirsbo Expansion System & Pb Tube. Only For Pex B Pipes..
【Applications】: This Brass Crimp Pex Fitting Can Be Used Only For Pex B Pipes In Plumbing Jobs. Great For Hot Or Cold Water Distribution And And Hydronic Heating Systems In Your Home, In Warehouse Or In Rv..
【Non-Pollution】: Lead Free Brass Pex Fittings, Comply With Drinking Water Standard. Astm F1807 Nsf/Ansi 61 Certified.
Features
- Package Includes : Pex B Fittings Combo includes 12pcs 1/2" PEX Elbows, 12pcs 1/2" PEX Tees, 12pcs 1/2" PEX Couplings
- Non-Pollution : Lead free brass pex fittings, comply with drinking water standard. ASTM F1807 NSF/ANSI 61 Certified
- Extra-Long Service Life : High-quality brass pex 90 degree elbow & tee & coupling, resists corrosion, rust and high temperature (32 200 ).
- Applications : This brass crimp PEX fitting can be used ONLY for PEX B pipes in plumbing jobs. Great for hot or cold water distribution and and hydronic heating systems in your home, in warehouse or in RV.
- Compatible Products : Use with Stainless Steel Clamp Rings or PEX Crimp Copper Rings. (Clamp rings are not included in this set.)
- Warm Tips : NOT Compatible with UPONOR/Wirsbo EXPANSION SYSTEM & PB TUBE. ONLY for PEX B pipes.
- See more on Amazon...
Brand: SUNGATOR | Manufacturer: SUNGATOR
See On Amazon #8
iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings
Asin: B09134F7GY | Model: CRQ01 | PartNumber: CRQ01
Compact Design With Wide Grip Handles. One-Handed Operation. Quick And Easy Disassembly.
The Disconnect Tool Depresses The Release Collar Using The Force Applied By Your Hand To Allow The Teeth Of The Fitting To Release And The Fitting To Be Removed, Reducing The Risk Of Installation Errors.
To Use The Disconnect Tong, Slide The Tong Over The Fitting And The Pipe. Squeeze The Tong To Press The Fittings Collar And Pull The Pipe From The Fitting. Easier To Use In Tight Situations.
Crq01 Disconnect Tong Is The Easiest Way To Disconnect Brass Push To Connect Fittings In Hard To Reach Places Where It Can Be Tough To Get Leverage On The Release Collar.
Features
- CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe
- CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar
- Compact design with wide grip handles. One-handed operation. Quick and easy disassembly
- To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations
- The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors
- See more on Amazon...
Brand: IWISS | Manufacturer: ZHEJIANG IWISS ELECTRIC CO.,LTD
See On Amazon #9
SharkBite 1/2 Inch x 25 Feet Blue PEX Pipe Flexible Water Tubing for Plumbing, PEX-B, U860B25
Asin: B00A8HUWKI | Model: U860B25 | PartNumber: U860B25 | Ean: 7241870698543, 0697285240124 | UPC: 697285240124
Certified: Soft Pex Tubing Is Approved For Water Service Lines And Burial Applications Including Being Buried Under Concrete; Certified To Meet Astm F2023 Oxidative-Resistance Requirements For Continuous Hot Water Recirculation.
Made In The Usa: All Sharkbite Piping Is Manufactured And Tested In The Usa.
Rated: Sharkbite Flex Pipe Plumbing Features A Minimum Working Temperature Of 33 Degrees F At 160 Psi, And A Maximum Working Temperature Of 200 Degrees F At 80 Psi; Maximum Working Pressure 160 Psi At 33 Degrees F - 70 Degrees F.
Flexible Pex Pipe: Line Expands And Contracts With Temperature Changes And Is Freeze Resistant; Allows For Longer Runs And Fewer Connections, And Can Easily Bend Around Corners, Reducing Potential Leak Points.
Features
- PEX TUBING: Flexible water pipe tubing ideal for potable water distribution systems, fire protection and municipal water service lines; chlorine and UV resistant
- FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant; allows for longer runs and fewer connections, and can easily bend around corners, reducing potential leak points
- CERTIFIED: Soft PEX tubing is approved for water service lines and burial applications including being buried under concrete; certified to meet ASTM F2023 oxidative-resistance requirements for continuous hot water recirculation
- RATED: SharkBite flex pipe plumbing features a minimum working temperature of 33 degrees F at 160 psi, and a maximum working temperature of 200 degrees F at 80 psi; maximum working pressure 160 psi at 33 degrees F - 70 degrees F
- MADE IN THE USA: All SharkBite piping is manufactured and tested in the USA
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 2.00 x 23.50 x 23.50 inches | Weight: 1.39 pounds
Warranty: Warranty
See On Amazon #10
Oatey Sure-Vent 1-1/2 in. 2 in. 160 Branch, 24 Stack DFU Air Admittance Valve with White PVC Sch. 40 Adapter
Asin: B0069KCZO4 | Model: 39017 | PartNumber: 39017 | Ean: 0782247277147, 7535001228205, 5448095724275, 0038753390178, 0732454231210 | UPC: 732454231210, 038753390178, 782247277147
Vents Up To 160 Dfu Branch Or 24 Dfu Stack.
Complies To Asse Standard 1050 And 1051. International Plumbing Code (Ipc) And Uniform Plumbing Code (Upc) Approved.
Protective Sleeve Provides Grip For Installation And Keeps Valve Free From Debris.
100% Functionally Tested At 1/4 In. H2o And 30 In. H2o, Ensuring Trouble-Free Performance.
One Size Approved To Handle 1-1/2 In.–2 In. Vent Pipe.
Use As An Alternative To A Secondary Vent In A Dwv System.
Features
- Sure-Vent air admittance valve with PVC Sch. 40 adapter
- Use as an alternative to a secondary vent in a DWV system
- Vents up to 160 DFU Branch or 24 DFU Stack
- One size approved to handle 1-1/2 in. 2 in. vent pipe
- Protective sleeve provides grip for installation and keeps valve free from debris
- 100% functionally tested at 1/4 in. H2O and 30 in. H2O, ensuring trouble-free performance
- Complies to ASSE Standard 1050 and 1051. International Plumbing Code (IPC) and Uniform Plumbing Code (UPC) approved
- See more on Amazon...
Brand: Oatey | Manufacturer: Oatey
Dimensions: 2.30 x 5.90 x 3.20 Inches | Weight: 0.10 Pounds
Warranty: Limited Warranty
See On Amazon #11
EZ-FLO Irrigation Hose Bibb, 1/2 Inch MIP Connection, 1/2 Inch MHT Connection, Brass Plumbing Fitting, 20181
Asin: B00838IJEK | Model: 20181 | PartNumber: 20181 | Ean: 0091712201816 | UPC: 091712201816
Versatile: Outdoor Water Spigot Is Compatible With Copper And Galvanized Pipe, And Standard Garden Hoses With A 1/2 Inch Female Hose Thread Connection.
Specs: Outside Faucet Bibb Is Equipped With 1/2 Inch Male Inlet Pipe (Mip) X 1/2 Inch Male Hose Thread (Mht) Connections.
Easy To Install: Irrigation Garden Hose Valve Allows For Easy Installation, And Is Usable For Both Residential And Commercial Applications.
Durable: Exterior Water Spigot Is Constructed Of Heavy Duty Brass With A Zinc Handle For Extra Strength And Durability.
Features
- OUTDOOR HOSE NOZZLE: Bent nose garden valve is designed for irrigiation applications only, not intended for potable water
- DURABLE: Exterior water spigot is constructed of heavy duty brass with a zinc handle for extra strength and durability
- VERSATILE: Outdoor water spigot is compatible with copper and galvanized pipe, and standard garden hoses with a 1/2 inch female hose thread connection
- EASY TO INSTALL: Irrigation garden hose valve allows for easy installation, and is usable for both residential and commercial applications
- SPECS: Outside faucet bibb is equipped with 1/2 inch Male Inlet Pipe (MIP) x 1/2 inch Male Hose Thread (MHT) connections
- See more on Amazon...
Brand: EASTMAN | Manufacturer: EZ-FLO
Dimensions: 3.25 x 3.25 x 2.25 inches | Weight: 0.34 pounds
See On Amazon #12
NDS 430 Pop-Up Drainage Emitter with Elbow and Adapter for 3 in. & 4 in. Drain Pipes, works with drainage systems including catch basins, Green Plastic
Asin: B00G5GDJMY | Model: 430 | PartNumber: 430 | Ean: 0052063003146 | UPC: 052063003146
Installation: Connects To 3 In. & 4 In. Single-Wall Corrugated And Dwv/Sch. 40 Pipes, Remove Adapter To Connect To 3 In. Sewer & Drain And Triple-Wall Pipes, Releases Water Up To 56 Gpm.
Safe Flat Profile: Cap, Or Cover, Pops Up As High As 1 In. Once Water Pressure Builds And Closes As Flow Diminishes. Flat Profile Design Reduces Trip Hazard Posed By Open Drain; Closed Position Keeps Emitter Flush To The Ground.
Unique Architecture: The Pop-Up Emitter Cover Consists Of The Pop-Up Cap And Wide Flange Design That Prevents Turf Overgrowth; Underneath Is An Engineered Crossbar Design Which Helps Maximize Flow While Flushing Out Debris.
How It Works: The Pop-Up Emitter Works At A Low Point Of The Drainage System To Discharge Water Collected From Upstream And Help Protect Property From Water Damage.
Features
- RELEASE WATER AWAY FROM PROPERTY: Water captured in your drainage system needs a point of release, and one of the best solutions for the job is the Pop-up Drainage Emitter
- HOW IT WORKS: The pop-up emitter works at a low point of the drainage system to discharge water collected from upstream and help protect property from water damage
- INSTALLATION: Connects to 3 in. & 4 in. single-wall corrugated and DWV/Sch. 40 pipes, remove adapter to connect to 3 in. sewer & drain and triple-wall pipes, Releases water up to 56 GPM
- UNIQUE ARCHITECTURE: The pop-up emitter cover consists of the pop-up cap and wide flange design that prevents turf overgrowth; Underneath is an engineered crossbar design which helps maximize flow while flushing out debris
- SAFE FLAT PROFILE: Cap, or cover, pops up as high as 1 in. once water pressure builds and closes as flow diminishes. Flat profile design reduces trip hazard posed by open drain; closed position keeps emitter flush to the ground
- See more on Amazon...
Brand: NDS | Manufacturer: NDS Raindrip
Dimensions: 5.94 x 9.25 x 5.25 inches | Weight: 0.27 pounds
See On Amazon #13
Litorange 2 Pack Brass 3/4" Inch GHT Hose Bibb Connector Backflow Preventer Vacuum Breaker
Asin: B07KTRW4KJ | Ean: 8011605707562
【Advanced Function】: Break-Off Screw For Permanent Attachment; Eliminates Back-Siphonage Into Water Supply; Anti-Backflow Valve For Most Of Standard Hose And End Valves Including Hose Bibs, Sillcocks, Rv, Garden Spigot, Outside Water Faucets, Hydrants..
【High Quality】: Durable Brass Material Stays Longer; Meets Asse 1011/Csa B64.2, Meets Ansi/Nsf 61-9..
【Drain Hole】:Reaching A Certain Water Pressure, Drain Hole Is Able To Drain The Remained Water In The Pipe. Warning :Please Keep Away From The Product When Turning Off The Water, Remained Water Will Be Sprayed Wet Your Clothes..
【Specifications】: 3/4 Inch Female Hose Threaded Inlet × 3/4 Inch Male Hose Threaded Outlet; Max Operating Pressure Is 125 Psi; Max Operating Temperature Is 180°F/82°C.
Features
- What do you get : 2 Vacuum Breakers, 2 Washers, 1 Tape (About 350" long).Comes with 3 months guarantee.
- Specifications : 3/4 inch female hose threaded inlet 3/4 inch male hose threaded outlet; max operating pressure is 125 psi; max operating temperature is 180 F/82 C
- Advanced Function : Break-off screw for permanent attachment; eliminates back-siphonage into water supply; anti-backflow valve for most of standard hose and end valves including hose bibs, sillcocks, RV, garden spigot, outside water faucets, hydrants.
- Drain Hole :Reaching a certain water pressure, drain hole is able to drain the remained water in the pipe. WARNING :Please keep away from the product when turning off the water, remained water will be sprayed wet your clothes.
- High Quality : Durable brass material stays longer; Meets ASSE 1011/CSA B64.2, Meets ANSI/NSF 61-9.
- See more on Amazon...
Brand: LitOrange | Manufacturer: Litorange
See On Amazon #14
Plumb Pak Keeney 400WK 1.25-in. x 1.5-in. Plastic P-Trap with Reducing Washer, White, 1-1/2-Inch or 1-1/4-Inch by 1-1/2-Inch
Asin: B002OMUYLC | Model: 400WK | PartNumber: 400WK | Ean: 0046224004745, 0734111480207 | UPC: 046224004745, 734111480207
1-1/2 In. Outlet.
With 1-1/2-Inch To 1-1/4-Inch Reducer Washer.
Durable Polypropylene Material.
P-Trap For Lavatory Or Kitchen.
Connects To 1-1/2 In. Or 1-1/4 In. Wall Connection With Reducer Washer.
Heavy-Duty Washer Safeguards Against Leaks For A Problem-Free Connection.
Includes All Necessary Nuts And Washers.
Inlet: 1-1/2-Inch Or 1-1/4-Inch.
1-1/2 In. Or 1-1/4 In. Inlet.
Features
- Plastic P-trap
- 1-1/2 in. or 1-1/4 in. inlet
- 1-1/2 in. outlet
- Includes all necessary nuts and washers
- Connects to 1-1/2 in. or 1-1/4 in. wall connection with reducer washer
- Heavy-duty washer safeguards against leaks for a problem-free connection
- Durable polypropylene material
- P-trap for lavatory or kitchen
- Inlet: 1-1/2-Inch Or 1-1/4-Inch
- With 1-1/2-Inch to 1-1/4-Inch reducer washer
- Outlet: 1-1/2-inch
- White polypropylene
- See more on Amazon...
Brand: Plumb Pak | Manufacturer: Keeney Manufacturing
Dimensions: 12.00 x 8.25 x 2.00 inches
Warranty: 1 year limited warranty.
See On Amazon #15
Fluidmaster B1T12CS CLICK SEAL Toilet Connector, Braided Stainless Steel - 3/8 Female Compression Thread x 7/8 Female Ballcock Thread, 12-Inch Length
Asin: B005SPLBWS | Model: B1T12CS | PartNumber: B1T12CS | Ean: 0039961411822, 0785497353869 | UPC: 785497353869, 039961411822
Click Seal Minimizes Cross Threading And Stripping.
Click Lets You Know It Is Sealed.
5 Year Warranty.
Prevents Overtightening.
Proven Strength With Braided Stainless Steel Construction.
Fits 3/8" Comp X 7/8" Ballcock With A 12" Length.
Highly Flexible To Resist Kinks And Creases Even In Tight Spaces.
Toilet Connector.
Easy To Install, No Tools Required Just Twist, “Click” And Seal.
Features
- Upgrading your toilet supply line is simple with this durable Click Seal toilet connector
- Easy to install, no tools required just twist, click and seal
- Click Seal minimizes cross threading and stripping
- Highly flexible to resist kinks and creases even in tight spaces
- Proven strength with braided stainless steel construction
- Fits 3/8 Comp x 7/8 Ballcock with a 12 length
- 5 year warranty
- Prevents overtightening
- Toilet connector
- Click lets you know it is sealed
- 3/8-Inch female compression thread x 7/8-Inch ballcock thread
- Lead free
- Exceeds all requirements
- See more on Amazon...
Brand: Fluidmaster | Manufacturer: Jensen
Dimensions: 2.00 x 12.00 x 2.50 Inches | Weight: 0.10 Pounds
Warranty: Warranty
See On Amazon #16
Raven R1508 Termination Cap Vent Cover Mesh Screen, Round Furnace PVC Pipe Stainless Steel Roof Vent Cap, Drain Screen 2" Inner & 2-3/8" Outer Diameter
Asin: B01BW2EXTS | Model: R1508 | PartNumber: R1508 | Ean: 0804595109878 | UPC: 804595109878
Simple - No Efforts Required And Easy To Install By Placing Vent Inside The Hub Of Pvc Or Rubber Elbow, Adapter Or Coupling (Not Included).
Airflow - No Obstruction Allows Maximum Airflow Through The Mesh Screen.
Tough - Stainless Steel Won't Corrode Or Rust As Type 304 Mesh Screen Prevents Leaves, Debris, And Wildlife From Entering Vent Pipe Cover.
Patented - Small Opening Allows Water Condensation To Drain Downward On The Side Of The Vent Cap.
Features
- IMPORTANT NOTE - this is a 2 inch with 2-3/8 inch outer diameter so please note that PVC elbow, adapter or coupling is not included and must be purchased separately - check for compatible size to ensure correct fit
- PATENTED - small opening allows water condensation to drain downward on the side of the vent cap
- SIMPLE - no efforts required and easy to install by placing vent inside the hub of PVC or rubber elbow, adapter or coupling (not included)
- TOUGH - stainless steel won't corrode or rust as type 304 mesh screen prevents leaves, debris, and wildlife from entering vent pipe cover
- AIRFLOW - no obstruction allows maximum airflow through the mesh screen
- See more on Amazon...
Brand: RAVEN | Manufacturer: Raven
Dimensions: 3.00 x 6.00 x 6.00 inches | Weight: 0.04 Pounds
See On Amazon #17
SharkBite 1/2 x 3/4 Inch MHT 45 Degree Hose Bibb, Multi Turn, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 24632LF
Asin: B076FX66HG | Model: 24632LF | PartNumber: 24632LF | Ean: 0697285246324 | UPC: 697285246324
Easy To Install: The Innovative Design Of The Sharkbite Brass Push Multi-Turn Hose Bibb Allows For Quick And Easy Installation, With No Tools, Crimping, Glue, Or Soldering Required; Can Be Installed In Wet Lines; Remove Using A Disconnect Clip Or Disconnect Tongs.
Made In The Usa: All Sharkbite Valves, Clips, Joints, And Adapters Are Manufactured And Tested In The Usa.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use; Ideal For Replacement And New Construction Installation.
Versatile: Brass Push 45-Degree Hose Bibbs Work Well With Pex, Cpvc, Pe-Rt, Hdpe, And Copper Pipes; Combines A 3/4 Inch Garden Hose Outlet With A 1/2 Inch Push-To-Connect Inlet At A 45-Degree Angle To Prevent Hose Kinks; Ideal For Working In Tight Spaces.
Features
- SHARKBITE BRASS PUSH 45 DEGREE HOSE BIBB: Multi-turn shut-off valve with mounting tabs and angled handle can be used for water flow regulation; features a patented one-piece 2.4-inch diameter mounting flange and inlet connection
- VERSATILE: Brass push 45-degree hose bibbs work well with PEX, CPVC, PE-RT, HDPE, and copper pipes; combines a 3/4 inch garden hose outlet with a 1/2 inch push-to-connect inlet at a 45-degree angle to prevent hose kinks; ideal for working in tight spaces
- EASY TO INSTALL: The innovative design of the SharkBite brass push multi-turn hose bibb allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines; remove using a disconnect clip or disconnect tongs
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use; ideal for replacement and new construction installation
- MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 3.66 x 3.39 x 2.44 inches | Weight: 0.49 pounds
Warranty: Warranty
See On Amazon #18
SUNGATOR Pex Fittings 1/2 Inch, 25-Pack 1/2" Pex 90 Degree Elbow, No Lead Brass, 1/2 Inch Pex Fittings For Pex Pipe
Asin: B081XLBJN1 | Ean: 6972014031339
【Extra-Long Service Life】: High-Quality Brass Pex 90 Degree Elbow Set Resists Corrosion, Rust And High Temperature (32℉—200℉)..
【Compatible Products】: 1/2 Inch Pex Fittings Use With Stainless Steel Clamp Rings Or Pex Crimp Copper Rings. (Clamp Rings Are Not Included In This Set.).
【Warm Tips】: Not Compatible With Uponor/Wirsbo Expansion System & Pb Tube. Only For Pex B Pipes..
【Applications】: 90 Degree Elbow 1/2" Pex Fittings Can Be Used For Pex B Pipes In Plumbing Jobs. Only For Pex B Pipes. Great For Hot Or Cold Water Distribution And And Hydronic Heating Systems In Your Home, In Warehouse Or In Rv. But Not Uponor/Wirsbo Expansion System & Pb Tube..
【Non-Pollution】: Pex Elbows 1/2 Inch Set Is Lead Free Brass Pex Fittings, Comply With Drinking Water Standard. Astm F1807 Nsf/Ansi 61 Certified..
Features
- Package Includes : Pex B Fittings Set includes 25pcs 1/2" PEX Elbows
- Non-Pollution : Pex Elbows 1/2 inch Set is Lead free brass pex fittings, comply with drinking water standard. ASTM F1807 NSF/ANSI 61 Certified.
- Extra-Long Service Life : High-quality brass pex 90 degree elbow set resists corrosion, rust and high temperature (32 200 ).
- Applications : 90 degree elbow 1/2 Pex fittings can be used for PEX B pipes in plumbing jobs. ONLY for PEX B pipes. Great for hot or cold water distribution and and hydronic heating systems in your home, in warehouse or in RV. But NOT UPONOR/Wirsbo EXPANSION SYSTEM & PB TUBE.
- Compatible Products : 1/2 inch Pex Fittings use with Stainless Steel Clamp Rings or PEX Crimp Copper Rings. (Clamp rings are not included in this set.)
- Warm Tips : NOT Compatible with UPONOR/Wirsbo EXPANSION SYSTEM & PB TUBE. ONLY for PEX B pipes.
- See more on Amazon...
Brand: SUNGATOR | Manufacturer: SUNGATOR
Weight: 1.00 pounds
See On Amazon #19
SharkBite Max 1/2 Inch Coupling, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR008A
Asin: B0C4QYTNK9 | Model: UR008 | PartNumber: UR008 | Ean: 0697285035249 | UPC: 697285035249
Strong And Durable: Straight Coupling Features A Reinforced Stainless Steel Collar Which Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Certified: Water Service Coupling Is Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: Straight Coupler Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass pipe connectors are perfect for making easy connections between two pieces of PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: Straight coupling features a reinforced stainless steel collar which locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: Straight coupler is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Water service coupling is rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
Brand: SharkBite | Manufacturer: US - Reliance Worldwide Corporation
Dimensions: 1.01 x 2.07 x 1.01 inches
See On Amazon #20
SharkBite 12 Inch Frost Free Sillcock, 1/2 x 3/4 Inch MHT, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 24636LF
Asin: B076G3LH11 | Model: 12 in. | PartNumber: 12 in. | Ean: 0697285246362 | UPC: 697285246362
Easy To Install: This Intuitive Sharkbite Brass Push Frost-Free Sillcock Allows For Quick And Easy Installation, With No Tools, Crimping, Glue, Or Soldering Required; Can Be Installed In Wet Lines; Remove Using A Disconnect Clip Or Disconnect Tongs.
Secured: The Sharkbite Frost-Free Sillcock Features An Integrated Vacuum Breaker To Prevent Backflow And A Mounting Flange To Secure The Valve.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications; Approved For Behind-The-Wall Applications With No Access Panels.
Versatile: Push-To-Connect Sillcocks Work Well With Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes; Ideal For Working In Tight Spaces.
Features
- SHARKBITE FROST FREE SILLCOCK: Outside faucet valve features an integrated 1/2 inch push-fit inlet and 3/4 inch garden hose outlet; a shut-off can be found at the inlet of the sillcock to drain the water and provide protection for the valve when freezing
- VERSATILE: Push-to-connect sillcocks work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; ideal for working in tight spaces
- EASY TO INSTALL: This intuitive SharkBite brass push frost-free sillcock allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines; remove using a disconnect clip or disconnect tongs
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications; approved for behind-the-wall applications with no access panels
- SECURED: The SharkBite frost-free sillcock features an integrated vacuum breaker to prevent backflow and a mounting flange to secure the valve
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 3.14 x 17.38 x 3.00 inches | Weight: 1.00 pounds
Warranty: Warranty
See On Amazon #21
NDS 6P06 PVC S&D Cap, 6-Inch, Makes Solvent-Weld Connections, for Use with 6-Inch Sewer and Drain Pipe, White
Asin: B00L4AO506 | Model: 6P06 | PartNumber: 6P06 | Ean: 0052063020662 | UPC: 052063020662
Where To Install: Connects To End Of 6 In. Sewer And Drain (S&D) Pipe.
Specifications: Works With Sewer And Drain Pipe Per Astm D 2729, D 3034, D 2751 And F 810; Not Compatible With Dwv Schedule 40 Pipe And Fittings Per Astm D 2665.
Solvent-Weld For A Watertight Connection: Made Of Polyvinyl Chloride (Pvc) For Hub X Hub Solvent-Weld Connections.
Makes Sewer & Drain Pipe Connections: Caps The Beginning Or End Of The Pipeline To Stop The Water Flow And Direct Water Toward The Open End.
Features
- CLOSES THE END OF PIPE: As part of a complete drainage system, the PVC cap closes off the end of the pipeline to stop water flow and direct water in the system toward an open end
- MAKES SEWER & DRAIN PIPE CONNECTIONS: Caps the beginning or end of the pipeline to stop the water flow and direct water toward the open end
- WHERE TO INSTALL: Connects to end of 6 in. Sewer and Drain (S&D) pipe
- SOLVENT-WELD FOR A WATERTIGHT CONNECTION: Made of polyvinyl chloride (PVC) for Hub X Hub solvent-weld connections
- SPECIFICATIONS: Works with Sewer and Drain pipe per ASTM D 2729, D 3034, D 2751 and F 810; Not compatible with DWV Schedule 40 pipe and fittings per ASTM D 2665
- See more on Amazon...
Brand: NDS | Manufacturer: NDS, Inc.
Dimensions: 6.75 x 3.00 x 3.00 inches | Weight: 0.93 Pounds
Warranty: Warranty
See On Amazon #22
Drain King H34 Unclogs Sewer Lines, Main, and Outside Deck Drains, 3 To 4 Inch
Asin: B0002YUWQG | Model: H34 | PartNumber: H34 | Ean: 0077155340008, 7466655965546, 6593856874429, 0077115340000, 0784497971349 | UPC: 784497971349, 077115340000, 077155340008
Water Expands Drain King From 3 To 4 Inches To Seal Pipe And Water Pulsating Jets Clear The Clogged Drain Quickly Up To 1000 Feet.
Made In The U.S.A..
Great For Cleaning Basement Drains.
Cleans Outside Deck Drains.
Important Tips: Store In Cool Dark Place, Do Not Use With Hot Water. Minimum Pressure To Inflate Is 40 Psi Up To A Maximum Of 80 Psi.
Great For Cleaning Main And Outside Sewer Drains.
Clears Slow And Clogged Drains In Your Main Drain And Sewer Lines With Water Power.
Fits Drain Size Of 3 To 4-Inch.
Drain King Is The Original Water-Powered Drain Cleaner To Ever Enter The Market.
Features
- Made in U.S.A with high quality material
- Drain King is the original water-powered drain cleaner to ever enter the market
- Water expands Drain King from 3 to 4 inches to seal pipe and water pulsating jets clear the clogged drain quickly up to 1000 feet
- Clears slow and clogged drains in your main drain and sewer lines with water power
- Important Tips: store in cool dark place, do not use with hot water. Minimum pressure to inflate is 40 psi up to a maximum of 80 psi
- Great for cleaning main and outside sewer drains
- Great for cleaning basement drains
- Cleans outside deck drains
- Fits drain size of 3 to 4-Inch
- Made in the U.S.A.
- See more on Amazon...
Brand: Drain King | Manufacturer: GTWater Products, Inc
Dimensions: 11.00 x 7.00 x 6.00 inches | Weight: 0.05 pounds
Warranty: Warranty
See On Amazon #23
Pangda 12 Pcs PVC Union Coupling Pipe Fitting PVC Slip Union Pipe Fittings PVC Adapter Coupling Schedule, White (1/2")
Asin: B0CYST5QJ5
Leakproof Performance: Worry Not About The Nuisance Of Leaks With Our Pvc Union Pipe Fittings; These Pvc Fittings Are Meticulously Designed With Built In Epdm O-Rings, Perfecting Their Sealing Capacity; This Ensures A Stout Resistance To Oil, Water, And Some Solvents, Thus Providing Maintenance Free And Leak Resistance Plumbing Performance.
Versatile Applications: Fulfill A Vast Range Of Plumbing Needs With Our Pvc Union Pipe Fittings; These Are Suitable For Both Indoor And Outdoor Use; From Irrigation Purposes To Functioning Within Underground Sprinkler Systems, Swimming Pools, And Chilled Water Supply Lines; Experience The Versatility Of Applications With Our Pvc Fittings.
Easy To Install: Ease Of Use Is At The Core Of The Design Of Our Pvc Fittings; Our Fittings Simplify The Process Of Connecting Two Pipes; As Such, Carrying Out Cleaning And Maintenance Routines For Pipes Becomes A Breeze.
Quality Materials: Our Pvc Fittings Are Made Of Quality Pvc Material, These Fittings Exemplify Durability And Performance; Their Good Malleability, Coupled With Resistance Against Low Temperatures, Impacts, And Corrosion, Keep An Exceptionally Long Service Life For Your Plumbing Systems.
Features
- Complete Package Solution: enjoy a hassle free plumbing experience with our comprehensive package which includes 12 pieces 1/2" PVC couplings; Our package ensures a smooth transaction by providing you with everything you need to easily connect and disconnect two 40 gauge pipes; This aids in future pipe cleaning and maintenance, ensuring a seamless process
- Quality Materials: our PVC fittings are made of quality PVC material, these fittings exemplify durability and performance; Their good malleability, coupled with resistance against low temperatures, impacts, and corrosion, keep an exceptionally long service life for your plumbing systems
- Leakproof Performance: worry not about the nuisance of leaks with our PVC union pipe fittings; These PVC fittings are meticulously designed with built in EPDM O-Rings, perfecting their sealing capacity; This ensures a stout resistance to oil, water, and some solvents, thus providing maintenance free and leak resistance plumbing performance
- Easy to Install: ease of use is at the core of the design of our PVC fittings; Our fittings simplify the process of connecting two pipes; As such, carrying out cleaning and maintenance routines for pipes becomes a breeze
- Versatile Applications: fulfill a vast range of plumbing needs with our PVC union pipe fittings; These are suitable for both indoor and outdoor use; From irrigation purposes to functioning within underground sprinkler systems, swimming pools, and chilled water supply lines; Experience the versatility of applications with our PVC fittings
- See more on Amazon...
Brand: Pangda | Manufacturer: Pangda
See On Amazon #24
VN Infinite quality 1/2 Inch Tee - Push Fit Plumbing Tee - Push to Connect Brass Plumbing Fittings - Fitting to Connect PEX, Copper, CPVC (Pack of 20)
Asin: B0D2S11M28 | Model: 1/2 Inch Tee - Push Fit Plumbing Tee | PartNumber: 1/2 Inch Tee - Push Fit Plumbing Tee
Easy Installation & Maintenance: Ideal For Branching Out Or Connecting Pipes, Our Tee Facilitates Easy Modifications Or Repairs Without Complex Plumbing Work, Saving Time And Effort. Temperature Range: 0 To 200 Degrees Fahrenheit..
Space-Saving Design: Featuring Push-Fit Technology And A Compact Design, Our Tee Allows For Effortless Installation In Tight Spaces, Reducing The Need For Costly Modifications Or Extensions, Making It Perfect For Any Plumbing Project..
Universal Compatibility: Compatible With Copper, Pex, And Cpvc Pipes, Our Tee Offers Versatility For Various Plumbing Applications, Ensuring Flexibility And Convenience In Your Projects..
Leak-Proof Assurance: Engineered With A Leak-Proof Design, Our Tee Ensures Your Plumbing System Operates Seamlessly Without Any Leaks Or Drips, Safeguarding Your Property From Water Damage And Costly Repairs..
Features
- Durable Construction: Crafted from high-quality brass, our push-fit tee ensures durability and longevity, guaranteeing a reliable and leak-free connection for years of hassle-free plumbing.
- Leak-Proof Assurance: Engineered with a leak-proof design, our tee ensures your plumbing system operates seamlessly without any leaks or drips, safeguarding your property from water damage and costly repairs.
- Easy Installation & Maintenance: Ideal for branching out or connecting pipes, our tee facilitates easy modifications or repairs without complex plumbing work, saving time and effort. Temperature range: 0 to 200 degrees Fahrenheit.
- Universal Compatibility: Compatible with copper, PEX, and CPVC pipes, our tee offers versatility for various plumbing applications, ensuring flexibility and convenience in your projects.
- Space-Saving Design: Featuring push-fit technology and a compact design, our tee allows for effortless installation in tight spaces, reducing the need for costly modifications or extensions, making it perfect for any plumbing project.
- See more on Amazon...
Brand: VN Infinite quality | Manufacturer: VN Infinite quality
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #25
SUNGATOR 12-Pack 3/4" X 3/4" X 1/2" PEX Reducing Tee Brass Crimp Fitting, No Lead Brass
Asin: B0B8RF7NZT
【Applications】: This Brass Crimp Fitting Can Be Used For Pex Pipes In Plumbing Jobs.(Clamp Rings Are Not Included In This Set.) Suitable For Pex B Tubing..
【 Package Includes】: 3/4" X 3/4" X 1/2" Pex Tee Brass Crimp Fittings (12-Pack).
【Compatible Products】: Compatible With Stainless Steel Clamp & Copper Crimp Ring Systems..
【Extra-Long Service Life】: High-Quality Brass Resists Corrosion, Rust And High Temperature (32℉—200℉)..
Features
- Non-Pollution : Lead free brass, comply with drinking water standard.
- Extra-Long Service Life : High-quality brass resists corrosion, rust and high temperature (32 200 ).
- Applications : This brass crimp fitting can be used for PEX pipes in plumbing jobs.(Clamp rings are not included in this set.) Suitable for Pex B Tubing.
- Compatible Products : Compatible with Stainless Steel Clamp & Copper Crimp Ring Systems.
- Package Includes : 3/4 X 3/4 X 1/2 PEX Tee Brass Crimp Fittings (12-Pack)
- See more on Amazon...
Brand: SUNGATOR | Manufacturer: SUNGATOR
See On Amazon #26
QuickFitting 1/2 Inch Push to Connect Coupling | Patented Design for Superior Sealing | Push On Brass Plumbing Pipe Fitting | for Copper, PEX and CPVC | 5-Pack PushFit Straight Connectors
Asin: B09XBRCPND | Model: LF811R-5 | PartNumber: LF811R-5 | Ean: 0845526012003 | UPC: 845526012003
Easy And Fast Installation; Simply Cut And Clean The End Of The Pipe, Mark The Insertion Depth And Push The Coupling Into Place; The Disconnect Is Just As Simple And Each Pack Includes A Patented Slip Clip Removal Tool.
Why Choose Quickfitting; Quickfitting Pushfit Technology Features A More Secure Connection Than Standard Fixtures; Our Plumbing Pipe Fittings Are A Reusable, Durable, Long-Lasting Plumbing Solution That Are Certified Lead-Free Making Them Safe For Water Lines And Safe For Your Health.
Built For Every Job; These Push Fit Connectors Can Be Used On Any Combination Of Copper, Pex Or Cpvc Tubing For Indoor Plumbing, Outdoor Plumbing, Heating Repair, Marine Repair, Broken Pipe Repair, Water Line Repair, Rv And Mobile Home Repair, And Even Irrigation.
Diy Plumbing; Our Push-To-Connect Fittings Are Built For Every User From Professional Contractors To Even The Most Inexperienced Users; No Open Flames Or Sealants Needed.
Features
- PUSH TO CONNECT COUPLING (STRAIGHT CONNECTOR); QuickFitting's patented design delivers superior sealing performance, backed by our 75-year warranty
- DIY PLUMBING; Our push-to-connect fittings are built for every user from professional contractors to even the most inexperienced users; No open flames or sealants needed
- EASY and FAST INSTALLATION; Simply CUT and CLEAN the end of the pipe, MARK the insertion depth and PUSH the coupling into place; The disconnect is just as simple and each pack includes a patented Slip Clip removal tool
- BUILT FOR EVERY JOB; These push fit connectors can be used on any combination of copper, PEX or CPVC tubing for indoor plumbing, outdoor plumbing, heating repair, marine repair, broken pipe repair, water line repair, RV and mobile home repair, and even irrigation
- WHY CHOOSE QUICKFITTING; QuickFitting pushfit technology features a more secure connection than standard fixtures; Our plumbing pipe fittings are a reusable, durable, long-lasting plumbing solution that are certified lead-free making them safe for water lines and safe for your health
- See more on Amazon...
Brand: QUICK FITTING | Manufacturer: Quick Fitting Holding Company
Warranty: 75-Year Warranty
See On Amazon #27
SharkBite Max 1/2 Inch Tee, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR362A
Asin: B0CNTLHHTD | Model: UR362A | PartNumber: UR362A | Ean: 0697285059634 | UPC: 697285059634
Strong And Durable: The Reinforced Stainless Steel Collar Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Certified: Pushfit Tee Couplers Are Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: Flex Tee Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass push tee fittings are perfect for making easy connections between two same-sized PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipes in any combination. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: Flex tee is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Pushfit tee couplers are rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
Brand: SharkBite | Manufacturer: US Reliance - Worldwide Corporation
Dimensions: 0.10 x 2.89 x 1.00 inches
See On Amazon #28
Home Master TMAFC-ERP-L Artesian Full Contact Loaded RO System, 7-Stages & John Guest Speedfit 3/8 Inch x 3/8 Inch x 1/4 Inch OD Reducing Tee, Push to Connect Plastic Plumbing Fitting
Asin: B0CYLXTT2Q
Product 1: Mineral Water On Tap | Patented Remineralization System Adds Calcium And Magnesium Twice During The Purification Process For Reduced Storage Tank Degradation And Great Tasting, Highly Pure Mineral Water On Tap.
Product 2: Durable: This Tee Connector Is Made With Durable White Polypropylene That Provides Excellent Protection Against Chemicals.
Product 2: Specs: These Union Connectors Can Withstand A Pressure Of 150 Psi At 70 Degrees F And 60 Psi At 140 Degrees F.
Product 2: John Guest Tee Connector: This Reducing Tee Is Designed For The Connection Of Plastic Or Copper Pipe And Is Approved For Behind-The-Wall Applications As A Permanent Leak-Free Connection.
Product 2: Design: This Push-To-Connect Fitting Is Equipped With Epdm O-Rings That Utilize John Guest's Push-Fit Technology To Make Easy, Reliable, And Leak-Free Connections.
Product 1: Nsf Certified Components | Meets Or Exceeds Nsf Standards For Material Safety And Performance. Nsf Listed Company. Made In Usa.
Product 1: Increased Luxury & Performance | Loaded Model Includes Brushed Nickel Ro Faucet, Fridge Connection Kit, And Dow Filmtec High Performance High Hardness Ro Membrane (0.0001 Micron, 75Gpd).
Features
- Product 1: A better RO system | Home Master Artesian Full Contact s innovative design solves most common problems associated with canister and tankless RO systems
- Product 1: Increased Luxury & Performance | Loaded model includes brushed nickel RO Faucet, Fridge Connection Kit, and Dow Filmtec High Performance High Hardness RO Membrane (0.0001 micron, 75GPD)
- Product 1: Mineral Water on Tap | Patented remineralization system adds calcium and magnesium twice during the purification process for reduced storage tank degradation and great tasting, highly pure Mineral Water on Tap
- Product 1: NSF Certified Components | meets or exceeds NSF standards for material safety and performance. NSF listed company. Made in USA
- Product 2: JOHN GUEST TEE CONNECTOR: This reducing tee is designed for the connection of plastic or copper pipe and is approved for behind-the-wall applications as a permanent leak-free connection
- Product 2: DESIGN: This push-to-connect fitting is equipped with EPDM O-rings that utilize John Guest's push-fit technology to make easy, reliable, and leak-free connections
- Product 2: DURABLE: This tee connector is made with durable white polypropylene that provides excellent protection against chemicals
- Product 2: SPECS: These union connectors can withstand a pressure of 150 PSI at 70 degrees F and 60 PSI at 140 degrees F
- See more on Amazon...
Brand: Home Master
See On Amazon #29
SharkBite Max 3/4 x 3/4 x 1/4 Inch Compression Tee Stop Valve, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR24985A
Asin: B0CNTKY1W4 | Model: UR24985A | PartNumber: UR24985A | Ean: 0697285071797 | UPC: 697285071797
Easy To Install: This Innovative Stop Valve Features A Quarter-Turn Full-Port Brass Ball Valve That Allows For Easy On/Off Control Of The Supply Line; No Special Tools, Crimping, Glue, Or Soldering Needed; Can Be Installed In Wet Lines.
Certified: Service Stop Valves Are Rated To 160 Degrees F And 125 Psi.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use; Feature A Sleek Chrome Finish For An Attractive Appearance.
Versatile: Brass Push Tee Stop Fittings Work Well With Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes; Can Be Rotated For Easier And Faster Installation.
Features
- BRASS PUSH TEE STOP VALVE: Brass push tee stop valves are used to add supply lines to fixtures and appliances such as dishwashers, humidifiers, and ice makers; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs
- VERSATILE: Brass push tee stop fittings work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; can be rotated for easier and faster installation
- EASY TO INSTALL: This innovative stop valve features a quarter-turn full-port brass ball valve that allows for easy on/off control of the supply line; no special tools, crimping, glue, or soldering needed; can be installed in wet lines
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use; feature a sleek chrome finish for an attractive appearance
- CERTIFIED: Service stop valves are rated to 160 degrees F and 125 PSI
- See more on Amazon...
Brand: SharkBite | Manufacturer: US Reliance - Worldwide Corporation
Dimensions: 0.10 x 3.35 x 1.34 Inches | Weight: 0.39 Pounds
See On Amazon #30
SharkBite Max 1/2 Inch Push Cap, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR514A
Asin: B0C6BZQNY6 | Model: UR514A | PartNumber: UR514A | Ean: 0697285072176 | UPC: 697285072176
Strong And Durable: The Reinforced Stainless Steel Collar Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Certified: Pushfit End Caps Are Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: Flex Plug End Cap Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc; Large Diameter Fittings (1-1/4 In. To 2 In.) Require A Stiffener When Connecting To Pex Pipe.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass push caps are perfect for plugging the end of a PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe quickly and easily. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC; large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe
- STRONG AND DURABLE: The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: Flex plug end cap is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Pushfit end caps are rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
First Available: 06/23/2023
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 1.00 x 1.08 x 1.00 inches | Weight: 0.06 Pounds
Warranty: Warranty
See On Amazon
Looking For Something Else?
Search