Best plasma cutting equipment - Buying Guide
Last Updated: 05/09/2024
Share on
Bestselling plasma cutting equipment on Amazon
- Plasma Cutter, Pilot Arc BTC500DP 7th Generation 50Amps Screen Display Dual Voltage 110/220V Digital...
- YESWELDER Plasma Cutting Machine 65Amp Non-High Frequency Non-Touch Arc Digital Screen Display DC In...
- ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC In...
- YESWELDER 55 Amp Plasma Cutter Non-High Frequency, Screen Display Non-Touch Pilot Arc, Digital DC In...
- GZ GUOZHI Plasma Cutter, 50 Amp Air Inverter Plasma Cutter, 110V/220V Dual Voltage Digital Display I...
- LOTOS LTP5000D Plasma Cutter, 50 Amp Non-Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 3...
- RX WELD 54Pcs Plasma Cutter Torch Consumables Electrode Nozzles Cups Kit Galvanized Copper Ceramic A...
- YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Power Plasma Cutter 1/2 Inch Clean Cut, Digital 110...
- YESWELDER Welding Cart for TIG MIG Welder and Plasma Cutter, Tilt-Table Large Storage 360 Rolling W...
- VIVOHOME Iron 3 Tiers Rolling Welding Cart with Upgraded Wheels and Tank Storage for TIG MIG Welder ...
#1
Plasma Cutter, Pilot Arc BTC500DP 7th Generation 50Amps Screen Display Dual Voltage 110/220V Digital Plasma Cutting Machine (BTC500DP 7GEN 110/220V)
Asin: B0C6G3SQ3W | Model: BTC500DP 7GEN | PartNumber: BTC500DP 7GEN | Ean: 0727431700865 | UPC: 727431700865
[Sensor Of Air Pressure & Air Compressor]: Inside Of Machine Have Sensor Of Air Pressure, User Can Adjust The Air Pressure Through The Regulator. The Air Filter Is Installed At The Rear Of The Machine With A Quick Air Connector 1/4 Npt, Which Can Be Used After Opening The Box. Users Can Use It After Connecting To The Air Compressor. Recommended Air Compressor Air Pressure Value Be Within The Range Of 90Psi, 250L/Min..
[Pt/2T/4T/Pa Function]: Post Time Function, With An Adjustment Range Of 3-15 Seconds. Adjust The Cooling Time Of The Torch Head To Extend The Service Life Of Consumables. Generally Speaking, We Recommend A Cooling Time Of 4-8 Seconds. 2T/4T Automatic Cutting Release Your Finger. 2T Is Semi-Automatic Cutting Control, And 4T Is Automatic Cutting Control. Pa Adjust The Time For The Pilot Arc, Longer Seconds Good At Cutting Mesh Metal, Short Seconds Is Good To Extend The Life Of Consumables..
[Cutting Thickness]: Adopting Advanced Igbt Inverter Technology, 50/60Hz High-Frequency Pilot Arc Plasma, Dual Voltage 110/220V, 60% Duty Cycle. Current Display At 110V Is 15-35A, Under 220V Current Display Is 15-50A, The Maximum Cutting Thickness Is Recommended To Be 12Mm @ 35A 110V, 50Psi; 16Mm@50A 220V, 60 Psi..
[Digital Screen Display]: The Screen Centrally Display Parameters Such As Air Pressure, Voltage, And Current, Allowing Users To Understand The Equipment Status In Real-Time And Adjust Operations In A Timely Manner, Improving Operational Efficiency. If Plasma Cutter Cannot Work, The Screen Comes With An Error Code System, Making It Easy To Find Out The Problems..
Features
- [Pilot Arc Function]: BTC500DP 7th plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. Added PA adjustable function, extended pilot arc maintenance time, reduce energy consumption in non cutting work, reduce electrode burning, and extend service life.
- [Digital Screen Display]: The screen centrally display parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.
- [Sensor of Air Pressure & Air Compressor]: Inside of machine have sensor of air pressure, User can adjust the air pressure through the regulator. The air filter is installed at the rear of the machine with a quick air connector 1/4 NPT, which can be used after opening the box. Users can use it after connecting to the air compressor. Recommended air compressor air pressure value be within the range of 90PSI, 250L/min.
- [Cutting Thickness]: Adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc plasma, dual voltage 110/220V, 60% duty cycle. Current display at 110V is 15-35A, Under 220V current display is 15-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 50PSI; 16mm@50A 220V, 60 PSI.
- [PT/2T/4T/PA Function]: Post time function, with an adjustment range of 3-15 seconds. Adjust the cooling time of the torch head to extend the service life of consumables. Generally speaking, we recommend a cooling time of 4-8 seconds. 2T/4T automatic cutting release your finger. 2T is semi-automatic cutting control, and 4T is automatic cutting control. PA adjust the time for the pilot arc, longer seconds good at cutting mesh metal, short seconds is good to extend the life of consumables.
- See more on Amazon...
Brand: bestarc | Manufacturer: bestarc
See On Amazon #2
YESWELDER Plasma Cutting Machine 65Amp Non-High Frequency Non-Touch Arc Digital Screen Display DC Inverter 110/220V Dual Voltage Blowback Plasma Cutting Machine CUT-65DS
Asin: B09L3Y3ZLF
[Powerful Cleaning Cutting] Cut-65Ds Adopts The International Leading Mcu Intelligent Digital Control Technology, All The Main Components Are Realized By Software. Ideal Clean Cut: 5/16"@110V, 5/8"@220V Maximum Cut: 1/2"@110V, 63/64"@220V..
[Air Filter Regulator] There Is An Air Pressure Sensor Inside The Machine, Users Can Adjust The Air Pressure By The Regulator. The Air Filter Is Mounted At The Rear Of The Machine, Which Allows For Quick Connection And Saves Installation Time And Improves Efficiency..
[Non-Touch Pilot Arc] The Pilot Arc Ipt40 Torch Has Better Cutting Performance, Which Efficiently Cuts Through Rough, Painted, And Rusty Surfaces, While Producing Minimal Slag..
[Pt/2T/4T Function]: Post Time Function, Adjustable From 5-20 Seconds. Adjust The Cooling Time Of The Welding Head To Extend The Life Of Consumables. Generally, We Recommend A Cooling Time Of 5-8 Seconds. 2T/4T Auto Cut Releases Your Fingers. 2T Is A Semi-Automatic Cutting Control, 4T Is An Automatic Cutting Control..
[Digital Screen Display]: The Screen Centrally Displays Parameters Such As Air Pressure, Voltage, Current, Etc., Allowing Users To Understand The Status Of The Equipment In Real Time, Adjusting The Operation In A Timely Manner, And Improving The Efficiency Of The Operation. If The Plasma Cutting Machine Can Not Work, There Will Be An Error Code System On The Screen, It Is Easy To Find The Problem..
Features
- [NON-HF START] The ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.
- [Digital Screen Display]: The screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to understand the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. If the plasma cutting machine can not work, there will be an error code system on the screen, it is easy to find the problem.
- [Powerful Cleaning Cutting] CUT-65DS adopts the international leading MCU intelligent digital control technology, all the main components are realized by software. Ideal Clean Cut: 5/16@110V, 5/8@220V Maximum Cut: 1/2@110V, 63/64@220V.
- [PT/2T/4T Function]: Post time function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is an automatic cutting control.
- [AIR FILTER REGULATOR] There is an air pressure sensor inside the machine, users can adjust the air pressure by the regulator. The air filter is mounted at the rear of the machine, which allows for quick connection and saves installation time and improves efficiency.
- [NON-TOUCH PILOT ARC] The pilot arc IPT40 torch has better cutting performance, which efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag.
- See more on Amazon...
Brand: YESWELDER | Manufacturer: YESWELDER
Dimensions: 11.81 x 15.75 x 5.91 Inches
See On Amazon #3
ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC Inverter IGBT 1/2 Inch Clean Cut Post Flow and 2T/4T, for Beginners DIY
Asin: B0B5N7K2DJ
【Portable & Lightweight】This Plasma Cutter Machine Only Weighs 13 Pounds, Easy To Carry. It's Also Tiny And Light Enough To Move With Strap In Any Workplace(Strap Included)..
【Safety & Durable】 Arccaptain Welder Machine Have Passed A Variety Of Professional Tests And Certifications Including Tüv And Ansi Standards Before Leaving Our Factory. We Provide 30-Day Money Back Guarantee And 2-Years Warranty For You..
【Advanced Digital Technology】You Can Adjust The Post-Flow Time From 5-15 Seconds To Have A Clean Cut. Also Could Select 2T/4T To Have A Comfortable Working Experience. The Exclusive Large Led Design Provides You With An Accurate Data Display And Helps You Read All Data Easier And More Clearly Without Taking Off Your Helmet..
【Easy To Assemble】With A Plug-In Air Filter Connector And Built-In Regulator, Help You To Get Rid Of Tedious Installation Anymore. Only Takes 30 Seconds And You Can Start Cutting..
Features
- EASY TO CUT, POWERFUL PERFORMANCE Automatic dual-voltage 110/220V. With advanced IGBT inverter technology, the maximum severance cut can reach up to 3/4" (20 mm), 1/2" (10mm) ideal clean cut, 60% duty cycle. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc. The recommended current is 50A, the recommended psi is between 20-40psi when connecting 110V, the recommended psi is between 30-60psi when connecting 220V.
- EASY TO ASSEMBLE With a plug-in air filter connector and built-in regulator, help you to get rid of tedious installation anymore. Only takes 30 seconds and you can start cutting.
- PORTABLE & LIGHTWEIGHT This plasma cutter machine only weighs 13 pounds, easy to carry. It's also tiny and light enough to move with strap in any workplace(strap included).
- ADVANCED DIGITAL TECHNOLOGY You can adjust the post-flow time from 5-15 seconds to have a clean cut. Also could select 2T/4T to have a comfortable working experience. The exclusive Large LED design provides you with an accurate data display and helps you read all data easier and more clearly without taking off your helmet.
- SAFETY & DURABLE ARCCAPTAIN welder machine have passed a variety of professional tests and certifications including T V and ANSI standards before leaving our factory. We provide 30-Day Money Back Guarantee and 2-Years Warranty for you.
- See more on Amazon...
Brand: ARCCAPTAIN | Manufacturer: ARCCAPTAIN
Dimensions: 8.00 x 13.00 x 6.00 inches | Weight: 13.00 pounds
See On Amazon #4
YESWELDER 55 Amp Plasma Cutter Non-High Frequency, Screen Display Non-Touch Pilot Arc, Digital DC Inverter 110/220V Dual Voltage Cutting Machine CUT-55DS Pro
Asin: B0CQZXGMJS
[Clean Cut] Cut-55Ds Pro Adopts The International Leading Mcu Intelligent Digital Control Technology, All The Main Components Are Realized By Software.Clean Cut: 1/3''@110V 1/2''@220V // Max Cut: 1/2''@110V 4/5''@220V..
[Air Filter Regulator] There Is An Air Pressure Sensor Inside The Machine, Users Can Adjust The Air Pressure By The Regulator. The Air Filter Is Mounted At The Rear Of The Machine, Which Allows For Quick Connection And Saves Installation Time And Improves Efficiency..
[Non-Touch Pilot Arc] The Pilot Arc Ipt40 Torch Has Better Cutting Performance, Which Efficiently Cuts Through Rough, Painted, And Rusty Surfaces, While Producing Minimal Slag..
[Pt/2T/4T Function]: Post Time Function, Adjustable From 5-20 Seconds. Adjust The Cooling Time Of The Welding Head To Extend The Life Of Consumables. Generally, We Recommend A Cooling Time Of 5-8 Seconds. 2T/4T Auto Cut Releases Your Fingers. 2T Is A Semi-Automatic Cutting Control, 4T Is An Automatic Cutting Control..
[Digital Display]: The Screen Centrally Displays Parameters Such As Air Pressure, Voltage, Current, Etc., Allowing Users To Understand The Status Of The Equipment In Real Time, Adjusting The Operation In A Timely Manner, And Improving The Efficiency Of The Operation. If The Plasma Cutting Machine Can Not Work, There Will Be An Error Code System On The Screen, It Is Easy To Find The Problem..
Features
- [NON-HF START] The ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.
- [DIGITAL DISPLAY]: The screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to understand the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. If the plasma cutting machine can not work, there will be an error code system on the screen, it is easy to find the problem.
- [CLEAN CUT] CUT-55DS PRO adopts the international leading MCU intelligent digital control technology, all the main components are realized by software.CLEAN CUT: 1/3''@110V 1/2''@220V // MAX CUT: 1/2''@110V 4/5''@220V.
- [PT/2T/4T FUNCTION]: Post time function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is an automatic cutting control.
- [AIR FILTER REGULATOR] There is an air pressure sensor inside the machine, users can adjust the air pressure by the regulator. The air filter is mounted at the rear of the machine, which allows for quick connection and saves installation time and improves efficiency.
- [NON-TOUCH PILOT ARC] The pilot arc IPT40 torch has better cutting performance, which efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag.
- See more on Amazon...
Brand: YESWELDER | Manufacturer: YESWELDER
See On Amazon #5
GZ GUOZHI Plasma Cutter, 50 Amp Air Inverter Plasma Cutter, 110V/220V Dual Voltage Digital Display IGBT Inverter Plasma Cutting Machine with 2T/4T/TEST Function
Asin: B0CJTRNYNR | Model: CUT-50 | PartNumber: CUT-50
【Set Up Within 1 Minute】: 1/4 Inch Industrial D-Type Plug, Can Easily And Quickly Connect To The Air Compressor, The Users Do Not Need To Install The Air Pressure Regulator. The Whole Machine Can Be Setup Quickly Within 1 Min..
【After-Sales Service】: We Offer One Year Warranty And Life-Time Technical Support For Every Customer. If You Have Any Questions Or Concerns While Using, Please Feel Free To Contact Us Via Message Or Via Email.Gz Guozhi Customer Service Centre Will Reply Within 24Hrs..
【Portable & Lightweight】: We Have Made A Major Upgrade To The Size And Weight Of The Machine. Compared To Other Similar Products, Our Cut-50 Is Lightweight And Small, Making It Easy To Use Even In Tight Spaces..
【Wide Applications】: Gz Guozhi 50 Amp Plasma Cutter Able To Cut Stainless Steel, Alloy Steel, Mild Steel,Copper，Aluminum And Other Metal Materials. This Cutter Can Work Normally At Minus 20 Degree..
【Safety Guarantee】: This Plasma Cutter Machine With Over-Heating And Over-Current Protection Functions, With Excellent And Reliable Quality, Use More Safety. 2T/4T/Test Function,Easy To Operation..
【Advanced Technology 】: 20A-50A Current Adjustment,90V-260V Wide-Voltage Design,Unafraid Of The Voltage Fluctuation, 110V/220V Dual-Voltage Automatic Conversion. Maximum Cutting Thickness Is 1/2 ", Ideal Clean Cutting Thickness Is 2/5 ". High Cutting Speed, Smooth Cutting Section And No Polish Demands..
Features
- GZ GUOZHI CUT 50 It is the perfect gift for Father, Husband, Friends, DIYer.
- Advanced Technology : 20A-50A current adjustment,90V-260V wide-voltage design,unafraid of the voltage fluctuation, 110V/220V dual-voltage automatic conversion. Maximum Cutting Thickness is 1/2 , ideal clean cutting thickness is 2/5 . High cutting speed, smooth cutting section and no polish demands.
- Set Up Within 1 Minute : 1/4 inch industrial D-type plug, can easily and quickly connect to the air compressor, the users do not need to install the air pressure regulator. The whole machine can be setup quickly within 1 min.
- Safety Guarantee : This Plasma Cutter Machine with over-heating and over-current protection functions, with excellent and reliable quality, use more safety. 2T/4T/TEST function,easy to operation.
- Portable & Lightweight : We have made a major upgrade to the size and weight of the machine. Compared to other similar products, our CUT-50 is lightweight and small, making it easy to use even in tight spaces.
- Wide Applications : GZ GUOZHI 50 Amp plasma Cutter able to cut stainless steel, alloy steel, mild steel,copper aluminum and other metal materials. This cutter can work normally at minus 20 degree.
- After-sales Service : We offer one year warranty and life-time technical support for every customer. If you have any questions or concerns while using, please feel free to contact us via message or via email.GZ GUOZHI customer service centre will reply within 24hrs.
- See more on Amazon...
Brand: GZ GUOZHI | Manufacturer: GZ GUOZHI
See On Amazon #6
LOTOS LTP5000D Plasma Cutter, 50 Amp Non-Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 3/4 inch Severance Cut, Dual Voltage 110/120V or 220/240V, Brown
Asin: B0052OX876 | Model: LTP5000D | PartNumber: LTP5000D | Ean: 0856381005024, 0736211809278, 0852661913713 | UPC: 736211809278, 852661913713, 856381005024
★ 𝐄𝐚𝐬𝐲 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The Pre-Installed Npt 1/4" Industry-Type D Plug And Air Filter Regulator Enable Seamless Connection To Your Air Compressor Using The Existing Stand Coupler. Setting Up The Entire Machine Is Effortless And Can Be Completed Within 1 Minute. ★ 𝐅𝐫𝐨𝐧𝐭-𝐌𝐨𝐮𝐧𝐭𝐞𝐝 𝐑𝐞𝐠𝐮𝐥𝐚𝐭𝐨𝐫: Emphasize The Significance Of Pressure Adjustment For Attaining Precise Cutting. Ensures A 100% Air Leakage-Free Guarantee..
★ 𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬: Power Supply, Plasma Cutting Torch, Ground Clamp, Pre-Installed Npt 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc..
★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Effortlessly Cuts Through Rough, Painted, And Rusty Surfaces While Generating Minimal Slag. The Pilot Arc Technology Enables Cutting Without Direct Contact Between The Tip And The Metal, Resulting In Improved Cutting Quality And Extended Consumable Lifespan..
★ 𝐎𝐮𝐭𝐩𝐮𝐭 & 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: 10-50A Dc Output, 5/8” Ideal Clean Cut And 3/4” Maximum Severance Cut Under 220/240V. 10-35A Dc Output, 3/8" Ideal Clean Cut And 1/2" Maximum Severance Cut Under 110/120V. Suitable Cutting For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-Hazardous Compressed Air To Cut, Safe And At Low Cost..
★ 𝐋𝐢𝐟𝐞𝐭𝐢𝐦𝐞 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐒𝐮𝐩𝐩𝐨𝐫𝐭: We Offer A 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞 And 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 Along With A 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 Covered By Our Us Based Lifetime Technical Support. To Avail The Warranty, Please Submit The Warranty Registration Form On Our Website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 Dedicated Customer Service Team Is Readily Available To Assist You Through Phone Or Email..
★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded Torch And Consumables Guarantee Enhanced Precision Cutting And Increased Durability, Leading To A Much Longer Consumable Lifespan. 𝐓𝐡𝐢𝐬 𝐡𝐞𝐥𝐩𝐬 𝐥𝐨𝐰𝐞𝐫 𝐲𝐨𝐮𝐫 𝐨𝐯𝐞𝐫𝐚𝐥𝐥 𝐮𝐬𝐚𝐠𝐞 𝐜𝐨𝐬𝐭𝐬. The Compact Plasma Cutter Features A Convenient Handle For Portability, And It Utilizes Non-Hazardous Compressed Air To Effortlessly Cut Through Various Materials, Including Stainless Steel, Alloy Steel, Mild Steel, Copper, And Aluminum..
Features
- % : 5/8" Clean Cut. Enhanced with on LOTOS & , delivering a remarkable 25% increase in cutting power output compared to standard 50-amp plasma cutters. The advanced control systems and precision cutting flames of the newly designed torch ensure high-precision cuts with smooth and fine cut lines. Experience faster cutting speeds without compromising accuracy.
- & : Newly designed upgraded torch and consumables guarantee enhanced precision cutting and increased durability, leading to a much longer consumable lifespan. . The compact plasma cutter features a convenient handle for portability, and it utilizes non-hazardous compressed air to effortlessly cut through various materials, including stainless steel, alloy steel, mild steel, copper, and aluminum.
- : The pre-installed NPT 1/4 industry-type D plug and air filter regulator enable seamless connection to your air compressor using the existing stand coupler. Setting up the entire machine is effortless and can be completed within 1 minute. - : Emphasize the significance of pressure adjustment for attaining precise cutting. Ensures a 100% Air Leakage-Free Guarantee.
- : we offer a - and - along with a - covered by our US based lifetime technical support. To avail the warranty, please submit the warranty registration form on our website. - dedicated customer service team is readily available to assist you through phone or email.
- - : Effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.
- & : 10-50A DC output, 5/8 ideal clean cut and 3/4 maximum severance cut under 220/240V. 10-35A DC output, 3/8 ideal clean cut and 1/2 maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- : Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4 industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
- See more on Amazon...
First Available: 11/25/2017
Brand: LOTOS | Manufacturer: Lotos Technology
Dimensions: 12.00 x 15.00 x 6.00 Inches | Weight: 19.40 Pounds
Warranty: We offer 30 days refund and a 3-YEARS Limited Warranty: Incling 1 Year NEW Replacement Warranty, please submit the registration form on our website.
See On Amazon #7
RX WELD 54Pcs Plasma Cutter Torch Consumables Electrode Nozzles Cups Kit Galvanized Copper Ceramic AG-60 Consumables
Asin: B08LN4GMBL | Model: AG60 52PK | PartNumber: AG60 52PK | Ean: 0726334766336 | UPC: 726334766336
Suitable For Home Diy And Light Duty Small Business Projects..
This Consumable Can Be Used With Sg-55 Ag-60 Plasma Cutting Torch Ag60 Sg55 For Icut60 Cut-60 Lgk-60 Cut50p Plasma Cutting Machines..
Material: Metal+Ceramic,100% Brand New And High Quality.
Package Includes: 2 Point Stand Off Guide, 2 Spring Spacer Guide, 10 Cup, 20 Nozzles, 20 Electrodes..
Features
- Fit for: SG-55 AG-60 plasma cutter torch head.
- Package includes: 2 point stand off guide, 2 spring spacer guide, 10 cup, 20 nozzles, 20 electrodes.
- Suitable for home DIY and light duty small business projects.
- Material: Metal+ceramic,100% brand new and high quality
- This consumable can be used with SG-55 AG-60 plasma cutting torch AG60 SG55 for ICUT60 CUT-60 LGK-60 CUT50P plasma cutting machines.
- See more on Amazon...
Brand: RX WELD | Manufacturer: RX WELDER
See On Amazon #8
YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Power Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved
Asin: B083GPXF8Y | Model: CUT-55DS | PartNumber: CUT-55DS
[Powerful Cutting Ability] 20-55 Output, Ideal Clean Cut: 3/10''@110V,1/2''@220V, Max Cut: 3/5''@110V,4/5''@220V. Uses Non-Hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Aluminum..
[Added Safety] Certificated By Etl, Automatic Compensation For Voltage Fluctuation, Over Current Protection, Over Load Protection, Temperature Control. Note:Due To The Inner Structure, The Pressure Gauge May Only Read About 30Psi, Which Is The Normal Phenomenom And It Do Not Affect The Whole Operation..
[Lightweight And Portable] Allows For Connection To 110 Or 220 Volt Receptacles Without Tools, Portable In The Shop Or At The Job Site—At 11.55Lb, The Shoulder Strap Allows The End User To Easily Move From Location To Location..
[Built-In Post Flow] When You Stop Cutting, The Air Runs On For A Minute To Cool The Consumable Of The Plasma Cutter Torch. This Will Extend Consumable Life..
Features
- [NON-TOUCH PILOT ARC] Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
- [BUILT-IN POST FLOW] When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
- [POWERFUL CUTTING ABILITY] 20-55 output, ideal clean cut: 3/10''@110V,1/2''@220V, max cut: 3/5''@110V,4/5''@220V. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- [LIGHTWEIGHT AND PORTABLE] Allows for connection to 110 or 220 volt receptacles without tools, Portable in the shop or at the job site at 11.55lb, the shoulder strap allows the end user to easily move from location to location.
- [ADDED SAFETY] Certificated by ETL, Automatic compensation for voltage fluctuation, over current protection, over load protection, temperature control. Note:Due to the inner structure, the pressure gauge may only read about 30psi, which is the normal phenomenom and it do not affect the whole operation.
- See more on Amazon...
Brand: YESWELDER | Manufacturer: SHENZHEN HAIBAO PLASMA EQUIPMENT CO.,LTD
See On Amazon #9
YESWELDER Welding Cart for TIG MIG Welder and Plasma Cutter, Tilt-Table Large Storage 360 Rolling Welding Trolley
Asin: B0C6PPTP7W | Model: HJC-02 | PartNumber: HJC-02
[Heavy-Duty Wheels] Equipped With 2* Universal Wheels + 2* Heavy-Duty Back Wheels, Allow Movement In All Directions Smoothly Without Wobble Or Noise..
[Safety Chains] Two Heavy-Duty 31.5'' Chains To Hold The Cylinder In Place Safely And Sturdily..
[Tilted Platform] The Sloping Countertop On The First Layer Allows You To Better Operate The Machine Panel And Read Data..
[3-Layer Large Storage] The Space Is Large Enough To Accommodate A Large Number Of Welding Items, Such As Welder, Plasma Cutter, Welding Magnets, Pliers, Welding Helmet, Tig Torch, Apron, Gloves, Etc..
Features
- [VERSATILE] Suitable for various kinds of welders/plasma cutters/welding tools and so on. And can be uesed both indoor & outdoor. With strong bearing capacity of 260lbs, fits most YESWELDER machines.
- [3-LAYER LARGE STORAGE] The space is large enough to accommodate a large number of welding items, such as welder, plasma cutter, welding magnets, pliers, welding helmet, TIG torch, apron, gloves, etc.
- [HEAVY-DUTY WHEELS] Equipped with 2* universal wheels + 2* heavy-duty back wheels, allow movement in all directions smoothly without wobble or noise.
- [TILTED PLATFORM] The sloping countertop on the first layer allows you to better operate the machine panel and read data.
- [SAFETY CHAINS] Two heavy-duty 31.5'' chains to hold the cylinder in place safely and sturdily.
- See more on Amazon...
Brand: YESWELDER | Manufacturer: YESWELDER
See On Amazon #10
VIVOHOME Iron 3 Tiers Rolling Welding Cart with Upgraded Wheels and Tank Storage for TIG MIG Welder and Plasma Cutter Black
Asin: B07SN2VBS7 | Model: VH427 | PartNumber: VH427 | Ean: 0885469878946 | UPC: 885469878946
Swivel Wheels - Equipped With 4 Heavy-Duty Pvc Swivel Casters, It Can Move Stably, Especially When It Is Loaded With Heavy Objects; 2 3-Inch Caster Front Wheels Allow Movement In All Directions By Providing 360° Of Rotation; You Can Move This Cart Freely Without Wobble Or Noise.
Practical Tool - It's Perfect For Transporting And Storing Most Mig, Arc Welding Machines, And Plasma Cutters, As Well As Plenty Of Room For Hoses, Welder's Helmet, And Welding Accessories; Suitable For Use In Home Garage, Workshop, Repair Shop, And So On.
Product Dimension - It's Fully Measured 27.6" X 11.8" X 35.4"(L X W X H); While The Top Shelf Is Approx. 17.7" X 10.8"(L X W); Middle Shelf Is Approx. 15" X 11"(L X W); Bottom Shelf Is Approx. 27.6" X 11.4"(L X W); The Rear Shelf Is Approx. 11.6" X 10.4"(L X W).
3-Tier Design - Features 3-Level Shelves That Provide You With Ample Space To Store Tools And Equipment; The Tilted Top Shelf Provides Easier Access To Welder Controls, And The Spacious Rear Shelf With 2 Safety Chains Secures The Gas Cylinder.
Features
- HEAVY-DUTY CONSTRUCTION - The welding cart is constructed of high-quality metal with full black coating, which is solid and rust-proof; With 0.4" thickness, it is able to bear 220 lbs. of weight and you can use it for a long time
- 3-TIER DESIGN - Features 3-level shelves that provide you with ample space to store tools and equipment; The tilted top shelf provides easier access to welder controls, and the spacious rear shelf with 2 safety chains secures the gas cylinder
- SWIVEL WHEELS - Equipped with 4 heavy-duty PVC swivel casters, it can move stably, especially when it is loaded with heavy objects; 2 3-inch caster front wheels allow movement in all directions by providing 360 of rotation; You can move this cart freely without wobble or noise
- PRODUCT DIMENSION - It's fully measured 27.6 x 11.8 x 35.4(L x W x H); While the top shelf is approx. 17.7 x 10.8(L x W); Middle shelf is approx. 15 x 11(L x W); Bottom shelf is approx. 27.6 x 11.4(L x W); The rear shelf is approx. 11.6 x 10.4(L x W)
- PRACTICAL TOOL - It's perfect for transporting and storing most MIG, ARC welding machines, and plasma cutters, as well as plenty of room for hoses, welder's helmet, and welding accessories; Suitable for use in home garage, workshop, repair shop, and so on
- See more on Amazon...
Brand: VIVOHOME | Manufacturer: VIVOHOME
Dimensions: 35.50 x 26.70 x 11.80 inches | Weight: 22.05 Pounds
See On Amazon #11
Plasma Cutter, 50A Non-Touch Pilot Arc Inverter DC Inverter 120/240V Dual Voltage Cutting Machine with Accessories
Asin: B08L889WBF | Model: CUT50 | PartNumber: CUT50 | Ean: 0784126416524 | UPC: 784126416524
🔋 𝐎𝐮𝐭𝐩𝐮𝐭 & 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: 10-50A Dc Output, 1/2” Ideal Clean Cut And 3/4” Maximum Severance Cut Under 220/240V. 10-35A Dc Output, 1/3" Ideal Clean Cut And 2/5" Maximum Severance Cut Under 110/120V. Suitable Cutting For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-Hazardous Compressed Air To Cut, Safe And At Low Cost..
🔋 𝐏𝐚𝐩𝐬𝐭 𝐀𝐝𝐯𝐚𝐧𝐜𝐞𝐝 𝐂𝐨𝐨𝐥𝐢𝐧𝐠 𝐒𝐲𝐬𝐭𝐞𝐦: Ensures The Plasma Cutter Has A Stable And Durable High Performance.★ 𝐃𝐮𝐚𝐥 𝐕𝐨𝐥𝐭𝐚𝐠𝐞 𝐈𝐧𝐩𝐮𝐭: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)..
🔋 𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬: Power Supply, Plasma Cutting Torch, Ground Clamp, Pre-Installed Npt 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc..
🔋 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded Torch And Consumables Ensure More Precise Cutting And Durability Of Consumable Life. Lower Your Usage Cost. Compact Plasma Cutter Has A Handle For Portability And Use Non-Hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Aluminum..
Features
- - : Efficiently Cuts Through Rough, Painted, And Rusty Surfaces And Produces Minimal Slag. Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal. Better Cutting Quality And Longer Consumable Life.
- & : Newly Designed Upgraded Torch And Consumables Ensure More Precise Cutting And Durability Of Consumable Life. Lower Your Usage Cost. Compact Plasma Cutter Has A Handle For Portability And Use Non-Hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Aluminum.
- & : 10-50A DC Output, 1/2 Ideal Clean Cut And 3/4 Maximum Severance Cut Under 220/240V. 10-35A DC Output, 1/3 Ideal Clean Cut And 2/5 Maximum Severance Cut Under 110/120V. SUITABLE CUTTING For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-Hazardous Compressed Air To Cut, Safe And At Low Cost.
- : Power Supply, Plasma Cutting Torch, Ground Clamp, Pre-Installed NPT 1/4 Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc.
- : Ensures The Plasma Cutter Has A Stable And Durable High Performance. : Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
- See more on Amazon...
Brand: S7 | Manufacturer: win-win
Dimensions: 10.00 x 16.00 x 6.00 Inches | Weight: 22.20 Pounds
See On Amazon #12
Jack&Dave 64Pcs Plasma Cutter Torch Consumables Electrode Nozzles Cups Kit Galvanized Copper Ceramic AG-60 Consumables
Asin: B0B7Q44J3J | Model: WSD60-2525 | PartNumber: WSD60-2525 | Ean: 0792102927209 | UPC: 792102927209
Suit For Home Diy Jobs And Light Duty Small Business Projects.
This Consumables Can Use With Sg-55 Ag-60 Wsd-60 Plasma Cutting Torch Ag60 Sg55 For Icut60 Cut-60 Lgk-60 Cut50p Plasma Cutting Machines..
Material:Metal+Ceramics,100% Brand New And High Quality.
Package Include:2 Guide(New) 2 Guide(Old) 10 Cup 25 Nozzles 25Electrodes..
Features
- Fit SG-55 AG-60 WSD-60 plasma cutter torch head.
- Package include:2 Guide(NEW) 2 Guide(OLD) 10 Cup 25 Nozzles 25Electrodes.
- Suit for home DIY jobs and light duty small business projects
- Material:Metal+ceramics,100% brand new and high quality
- This consumables can use with SG-55 AG-60 WSD-60 plasma cutting torch AG60 SG55 for ICUT60 CUT-60 LGK-60 CUT50P plasma cutting machines.
- See more on Amazon...
Brand: Jack&Dave | Manufacturer: Jack&Dave
See On Amazon #13
TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2" Clean Cut
Asin: B08FYCYJHQ | Model: TL-50C | PartNumber: TL-50C | Ean: 0630128776626 | UPC: 630128776626
Multi-Applications: Suitable For Cutting Stainless Steel, Alloy Steel, Low Carbon Steel, Copper And Other Metal Materials..
Portable: Auto-Voltage Adapts To 110 V - 220 V Input Power With Adapter. Lightweight 13Lb, Can Be Carry And Storage Anywhere You Need..
Safety Protection: Certificated By Etl, Built In Over Current Protection, Over Load Protection, Temperature Control..
Powerful Cutting Effect: Up To 50A Output, 60% Duty Cycle, Maximum 1/2" Clean Cut..
Features
- Non-touch Polit ARC: Can effectively cut rough, painted and rusty surfaces, and generates the least slag. The torch head does not need to touch the metal plate, then it will start arc. Better cutting quality and longer consumable life.
- Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2 clean cut.
- Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.
- Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control.
- Portable: Auto-voltage adapts to 110 V - 220 V input power with adapter. Lightweight 13lb, can be carry and storage anywhere you need.
- See more on Amazon...
Brand: TOOLIOM | Manufacturer: TOOLIOM
See On Amazon #14
ARCCAPTAIN 60PCS PT31 Plasma Cutting Consumables Fit CUT-40 CUT-50 CT-312 with Plasma Cutter Torch PT-31 JG-40 LG-40
Asin: B0C2C54FZC | Model: PT31-60pcs | PartNumber: PT31-60pcs
Wide Compatibility: These Plasma Torches Consumables Suitable Works With Plasma Cutting Machines Such As Cut35, Cut-40, Cut-40D, Lgk-40, Ct312, Ct312d, Ct416, Ct416d, Ct518, Ct518d, Ct520d, Super160, Super160p Etc..
Ensure Cutting Quality: Timely Replacement Of Accessories Will Help You Maintain The Plasma Cutter Machine Performance And Guarantee High-Quality Cutting Results..
Premium Material: Our Plasma Cutter Accessories Are Meticulously Crafted From High-Quality Metal And Ceramics, Ensuring Unmatched Durability And Reliability, Offer A Longer Lifespan..
Fit More Options: These Plasma Cutting Consumables Perfectly Fit Pt-31, Jg-40 And Lg40 Plasma Cutting Torch..
Features
- Package Include: 5 Shield Cups, 30 Nozzles, 10 Swirl Baffle, and 15 Electrodes.
- Fit More Options: These plasma cutting consumables perfectly fit PT-31, JG-40 and LG40 plasma cutting torch.
- Wide Compatibility: These plasma torches consumables suitable works with plasma cutting machines such as CUT35, CUT-40, CUT-40D, LGK-40, CT312, CT312D, CT416, CT416D, CT518, CT518D, CT520D, Super160, Super160P etc.
- Premium Material: Our plasma cutter accessories are meticulously crafted from high-quality metal and ceramics, ensuring unmatched durability and reliability, offer a longer lifespan.
- Ensure Cutting Quality: Timely replacement of accessories will help you maintain the plasma cutter machine performance and guarantee high-quality cutting results.
- See more on Amazon...
Brand: ARCCAPTAIN | Manufacturer: ARCCAPTAIN
See On Amazon #15
Lotos PCS22 Plasma Cutter Consumables Sets for Brown Color LTP5000D and Brown Color LTPDC2000D (22 Pieces)
Asin: B07L4418XZ | Model: PCS22 | PartNumber: PCS22 | Ean: 0856117006264 | UPC: 856117006264
Includes: 10 Nozzles 10 Electrodes 1 Cup 1 Stand Off Guide.
Nozzles And Electrodes Are Made By Genuine 100% Copper Instead Of Cheap Plated Copper Alloy.
It Does Not Fit Any Other Brand And Any Other Model Of Plasma Cutters.
Cannot Be Used For Red Color Lotos Ltp5000d & Red Color Lotos Ltpdc2000d.
Features
- Can only be used for BROWN Color Lotos LTP5000D and BROWN Color Lotos LTPDC2000D
- CANNOT be used for RED Color Lotos LTP5000D & RED Color Lotos LTPDC2000D
- Includes: 10 Nozzles 10 Electrodes 1 Cup 1 Stand Off Guide
- It does not fit any other Brand and any other Model of plasma cutters
- Nozzles and electrodes are made by genuine 100% copper instead of cheap plated copper alloy
- See more on Amazon...
Brand: LOTOS | Manufacturer: Lotos Technology
See On Amazon #16
JEGS Welding Cart with Drawers and Welding Tank Platform - Fits Most MIG, TIG, ARC Welding Machines, Plasma Cutter - Steel Constructed and Black Powder Coat Finished Welding Table with Locking Wheels
Asin: B08LH9GG1H | Ean: 0889944136347 | UPC: 889944136347
Larger Welding Cabinet Platform With 3 Smooth Gliding Drawers, Deep Drawer Depth, Welding Hose & Cable Hooks, Welding Tank Platform, Steel Construction And A Black Powder Coat Finish For Great Looks And Long Life Use..
(1) Welding Cart: 20 In. L X 14 In. W, (3) Drawers With Ball Bearing Sliding Drawers - Top: 11 In. L X 10 1/2 In. W X 2 In. D (Includes (9) 3 5/8 In. X 3 1/2 In. Bins) - Middle: 11 In. L X 16 In. W X 2 In. D - Bottom: 11 In. L X 16 In. W X 5 13/32 In. D, (1) Cabinet Bin With Magnetic Door Closure: 19 In. L X 12 In. W X 8 3/4 In. H, (4) Hose & Cable Hooks, (1) Welding Tank Platform W/2 Safety Chains: Holds Up To A 8 In. Diameter Cylinder, (2) 6 In. Fixed Casters, (2) 3 In. Locking Swivel Casters..
Perfect Utility Tool For Storing And Transporting Most Mig, Tig, And Arc Welding Machines, Plasma Cutter, Ample Room For Hoses, Welder's Helmet & Welding Accessories Great Size For Your Workspace Or Garage..
Large Storage Drawers Keep Your Welder Cart Supplies Organized And Safe While Its Smooth-Rolling Swivel Casters Let You Maneuver Your Welding Table Around The Shop With Ease..
Features
- Holds most welders and has enough storage space to store all your welding tools and supplies in one place
- Large storage drawers keep your welder cart supplies organized and safe while its smooth-rolling swivel casters let you maneuver your welding table around the shop with ease.
- Larger welding cabinet platform with 3 smooth gliding drawers, deep drawer depth, welding hose & cable hooks, welding tank platform, steel construction and a black powder coat finish for great looks and long life use.
- Perfect utility tool for storing and transporting most MIG, TIG, and ARC welding machines, plasma cutter, ample room for hoses, welder's helmet & welding accessories Great size for your workspace or garage.
- (1) Welding Cart: 20 in. L x 14 in. W, (3) Drawers with Ball Bearing Sliding Drawers - Top: 11 in. L x 10 1/2 in. W x 2 in. D (Includes (9) 3 5/8 in. x 3 1/2 in. Bins) - Middle: 11 in. L x 16 in. W x 2 in. D - Bottom: 11 in. L x 16 in. W x 5 13/32 in. D, (1) Cabinet Bin with Magnetic Door Closure: 19 in. L x 12 in. W x 8 3/4 in. H, (4) Hose & Cable Hooks, (1) Welding Tank Platform w/2 Safety Chains: Holds up to a 8 in. Diameter Cylinder, (2) 6 in. Fixed Casters, (2) 3 in. Locking Swivel Casters.
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 17.50 x 30.50 x 23.00 inches | Weight: 75.00 Pounds
See On Amazon #17
KEMAO 9-8210 60A Nozzle Tips 9-8215 Electrode, 20Pack, Fit for Thermal Dynamics SL60/SL100 Plasma Cutting Torch Consumables
Asin: B08MC6F786 | Model: 9-8215&9-8210 | PartNumber: 9-8215&9-8210 | Ean: 0054114421657 | UPC: 054114421657
【Perfectly Compatible】Suitable For Sl60 Sl100 Series Cutting Torches, Commonly Used In Cutmaster, A-Series Series Power Supplies.
【Satisfaction Guarantee】 We’Re Proud Of Our Products. If You Aren’T Satisfied, We’Ll Refund You For Any Reason Within A Year Of Purchase.
【No Worries 】Each Product Is Tested To Ensure Durability And Excellent Performance.
【Working Conditions】60A Standoff (Need To Match 9-8281 Guide Or 9-8235/9-8238 Shield Cap).
Features
- Great value Includes 10Pcs 9-8210 Nozzle + 10Pcs 9-8215 Electrode
- Working Conditions 60A Standoff (Need to match 9-8281 Guide OR 9-8235/9-8238 Shield Cap)
- Perfectly Compatible Suitable For SL60 SL100 Series Cutting Torches, Commonly Used In Cutmaster, A-Series Series Power Supplies
- No Worries Each Product Is Tested To Ensure Durability And Excellent Performance
- Satisfaction Guarantee We re proud of our products. If you aren t satisfied, we ll refund you for any reason within a year of purchase
- See more on Amazon...
Brand: Kemao | Manufacturer: KEMAO
Dimensions: 0.79 x 4.72 x 3.15 Inches | Weight: 0.44 pounds
See On Amazon #18
10pcs 9-8215 Electrode 9-8210 Nozzle Tips for Thermal Dynamics SL60/100 Plasma Torch, Premium Metal Material, Good Cutting Efficiency, Applicable with Copper Material
Asin: B0D3M7V5DX | Model: Genericet8dbynrgc | PartNumber: Genericet8dbynrgc
100% Brand New And : Experience Long-Lasting Durability And Reliability With Premium Metal Material.
Good Performance In Conductivity: Enjoy Efficient Electricity For Precise Cutting Results.
Long Service Life: With Standardized Manufacture, These Parts Are Built To Last.
Fine Workmanship Guaranteed Accuracy: Ensuring High Compatibility With Your Device.
Features
- Ideal for Thermal Dynamics Sl60/100: Suitable for various plasma cutting applications, providing consistent performance
- Fine Workmanship Guaranteed Accuracy: Ensuring high compatibility with your device
- 100% Brand New and : Experience long-lasting durability and reliability with premium metal material
- Long Service Life: With standardized manufacture, these parts are built to last
- Good Performance in Conductivity: Enjoy efficient electricity for precise cutting results
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #19
5pcs Spring Spacer Guide for SG 55/AG 60/WSD 60P Plasma Cutter Shield Cup, Made of Stainless Steel, for Long Term Spare tip Replacement
Asin: B0D3M4L9M2 | Model: Pissente2w4b1kgrg3 | PartNumber: Pissente2w4b1kgrg3
[ Material] Made Of Premium Stainless Steel, Resistant, Sturdy, And For Long Term Use..
[Easy Replacement] Simple To Change Out When The Spacer Guide Is Missing Or Damaged, Serving As Convenient Spare Tips..
[5Pcs Included] Comes With A Total Of 5 Spring Spacer Guides, Providing Ample Replacements For Continuous Use..
[Hassle Installation] Quick And Easy To Install, Making It User Friendly For Hassle Operation Of The Plasma Cutter Torch..
Features
- [Precise Fit] Specifically designed for sg 55/ag 60/wsd 60p plasma cutter torch, ensuring a perfect fit and optimal performance.
- [Hassle Installation] Quick and easy to install, making it user friendly for hassle operation of the plasma cutter torch.
- [ Material] Made of premium stainless steel, resistant, sturdy, and for long term use.
- [5pcs Included] Comes with a total of 5 spring spacer guides, providing ample replacements for continuous use.
- [Easy Replacement] Simple to change out when the spacer guide is missing or damaged, serving as convenient spare tips.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #20
5Pcs High Sensitivity Trigger Switch for MIG Welding & Plasma Cutter Torch, Stable & Reliable, 100% Brand New, Easy to Install
Asin: B0D3M3WTLV | Model: Pissente5zxcoiw0du | PartNumber: Pissente5zxcoiw0du
Easy Installation: Stay Stable And Reliable With An Easy Installation Process..
Quick Switch Control: Enjoy High Sensitivity And Quick Switch Control For Seamless Welding..
Brand New Quality: Experience 100% Brand New And With This Torch Trigger Switch..
Long Service Life: Count On Quality Assurance For A Long Service Life That Won't Let You Down..
Features
- Versatile Usage: Perfectly applicable for mig welding torches and plasma cutter torches.
- Long Service Life: Count on quality assurance for a long service life that won't let you down.
- Easy Installation: Stay stable and reliable with an easy installation process.
- Brand New Quality: Experience 100% brand new and with this torch trigger switch.
- Quick Switch Control: Enjoy high sensitivity and quick switch control for seamless welding.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #21
Plasma Nozzle Electrode Set 10pcs, Copper Material, 30~100A Working Current, for SL60/100 Plasma Cutting Torch
Asin: B0D3M428MZ | Model: Pissentecnbgyq6ief | PartNumber: Pissentecnbgyq6ief
Compatibility Guaranteed: Applicable For Thermal Dynamics Sl60/100 Plasma Cutting Torch, These Electrodes And Nozzles Ensure High Performance..
Long-Lasting: Made Of Premium Metal Materials, These Electrodes And Nozzles Provide Exceptional Durability For Extended Use..
Durable And Reliable: Standardized Manufacture And Fine Workmanship Ensure Accuracy, Making Them Perfect For Your Device..
100% Brand New And : Experience Premium Metal Durability And A Long Service Life With These Electrodes And Nozzle Tips..
Features
- Excellent Performance: Achieve high cutting efficiency with good electricity conductivity for precise machining and compatibility.
- 100% Brand New and : Experience premium metal durability and a long service life with these electrodes and nozzle tips.
- Compatibility Guaranteed: Applicable for thermal dynamics sl60/100 plasma cutting torch, these electrodes and nozzles ensure high performance.
- Durable and Reliable: Standardized manufacture and fine workmanship ensure accuracy, making them perfect for your device.
- Long-lasting: Made of premium metal materials, these electrodes and nozzles provide exceptional durability for extended use.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #22
Professional Plasma Swirl circle 220051 - Engineering Plastic Cutting Accessory for accurate Cutting of Carbon Steel, Stainless Steel, Aluminum, and Copper
Asin: B0D3LYS34H | Model: KJAOYUdu51ho3wec | PartNumber: KJAOYUdu51ho3wec
Compact And Portable Design: With A Small Size, This Plasma Swirl Circle Is Easy To Carry And Store, Providing Convenience And Excellent Performance In Various Settings..
Rigorous Quality Control And Assurance: This Plasma Swirl Circle Undergoes Strict Quality Control To Ensure A High Safety Factor, Allowing You To Use It With Confidence And Peace Of Mind..
High-Quality Engineering Plastic Construction: Made From Engineering Plastic Materials, This Swirl Circle Is Strong And Long-Lasting, Ensuring A Reliable Cutting Experience For Years To Come..
Smoothness Integral Molding: The Integral Molding Outer Layer Is Smoothness And Burrfree, Ensuring A Seamless Installation Process And Optimal Performance During Cutting Operations..
Features
- Versatile Material Compatibility: This plasma swirl circle is suitable for cutting various materials, including carbon steel, stainless steel, aluminum, and copper, making it a versatile addition to your welding toolkit.
- smoothness Integral Molding: The integral molding Outer layer is smoothness and burrfree, ensuring a seamless installation process and optimal performance during cutting operations.
- Compact and Portable Design: With a small size, this plasma swirl circle is easy to carry and store, providing convenience and excellent performance in various settings.
- High-Quality Engineering Plastic Construction: Made from engineering plastic materials, this swirl circle is strong and long-lasting, ensuring a reliable cutting experience for years to come.
- Rigorous Quality Control and Assurance: This plasma swirl circle undergoes strict quality control to ensure a high safety factor, allowing you to use it with confidence and peace of mind.
- See more on Amazon...
Brand: KJAOYU | Manufacturer: KJAOYU
See On Amazon #23
High Performance 220048 Plasma Retaining - Ceramic Accessory for Enhanced Cutting Efficiency and Durability
Asin: B0D3LVFF15 | Model: KJAOYUrp59iweb8x | PartNumber: KJAOYUrp59iweb8x
Lightweight And Compact: The 220048 Plasma Cutting Torch Retaining Is Designed To Be Lightweight And Compact, Ensuring Easy Handling And Replacement..
User-Friendly Installation And Removal: With An Easy-To-Install And Disassemble Design, This Reliable And Retaining Ensures A Effortless Experience For Metal Fabrication Professionals..
Superior Conductivity And Thermal Performance: This Retaining Provides Excellent Conductivity, Thermal Conductivity, And Resistance, As Well As Electrical Ablation Resistance, Enhancing Overall Cutting Efficiency..
Smoothness Outer Layer And Easy Installation: Featuring An Integrated Molding Design, This Has A Burrfree, Smoothness Outer Layer, Making It Simple To Install And Replace..
Features
- CorrosionResistant Ceramic Material: Made from high-quality ceramic, this retaining offers excellent , oxidation, and high-temperature resistance, extending its service life.
- smoothness Outer layer and Easy Installation: Featuring an integrated molding design, this has a burrfree, smoothness Outer layer, making it simple to install and replace.
- Lightweight and Compact: The 220048 plasma cutting torch retaining is designed to be lightweight and compact, ensuring easy handling and replacement.
- Superior Conductivity and Thermal Performance: This retaining provides excellent conductivity, thermal conductivity, and resistance, as well as electrical ablation resistance, enhancing overall cutting efficiency.
- User-Friendly Installation and Removal: With an easy-to-install and disassemble design, this reliable and retaining ensures a Effortless experience for metal fabrication professionals.
- See more on Amazon...
Brand: KJAOYU | Manufacturer: KJAOYU
See On Amazon #24
Plasma Cutter Torch Spacer Guide, Torch Shield Cup Spacer Guide for Shield for Gun Tip Spring Spacer Guide Ag Ag 60 Ag60 60P Porcelain Mouth 5Pcs Mug Industrial Gems Bench Vises
Asin: B0D3LXRMF1 | Model: Pissente9i12qdatgz | PartNumber: Pissente9i12qdatgz
Cutting Cup Gasket Guide: This Cutting Wax Cup Gasket Guide Is Very To Use.,Spacer Guide For Sg-55.
Application: Suitable For 55/Ag 60/Wsd 60P For Plasma Cutting Cups.,Spacer Guide.
Easy To Use: This Spring Spacer Guide Is Is A Necessary Tool For Welding Machine, And It Is Very To Install And Easy To Use.,Spacer Guide For Ag-60.
[Easy Installation]- Convenient And User Friendly For Effortless Application.,Torch Shield Cup Spacer Guide.
Features
- Made of steel, sturdy and to use.,Plasma Cutter Torch Spacer Guide,
- [Easy Installation]- Convenient and user friendly for effortless application.,Torch Shield Cup Spacer Guide
- Cutting Cup Gasket Guide: This cutting wax cup gasket guide is very to use.,Spacer Guide for SG-55
- Easy To Use: This spring spacer guide is is a necessary tool for welding machine, and it is very to install and easy to use.,Spacer Guide for AG-60
- Application: Suitable for 55/AG 60/WSD 60P for plasma cutting cups.,Spacer Guide
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #25
Premium Ceramic Retaining 420156 - and Heat Resistant Plasma cutting machine Nozzle for Professional Cutting Applications
Asin: B0D3LYRZXW | Model: KJAOYUq7vraxty0d | PartNumber: KJAOYUq7vraxty0d
Lightweight And Compact: The Lightweight And Compact Design Of This Retaining Make It Easy To Handle And Replace, Saving Time And Effort During Maintenance And Repairs..
Compatible With Plasma Cutting Machines: Designed Specifically For Use With Plasma Cutting Machines, This Retaining Is An Essential Spare Part For Professionals And Hobbyists Alike, Providing Reliable For Your Cutting Nozzle..
Stable Performance: Despite Its Small Size, This Retaining Delivers Stable Performance, Ensuring Consistent And Accurate Cuts In Various Plasma Cutting Applications..
Smoothness One-Piece Design: Featuring A Burrfree, One-Piece Molding, This Retaining Provides A Smoothness Outer Layer For Easy And Fluent Installation, Reducing The Exposures Of Damage To The Nozzle And Other Components..
Features
- Superior Ceramic Material: Made from high-quality ceramic, this retaining offers excellent , oxidation, and high-temperature resistance, ensuring a longer service life for your plasma cutting machine.
- smoothness One-Piece Design: Featuring a burrfree, one-piece molding, this retaining provides a smoothness Outer layer for easy and fluent installation, reducing the exposures of damage to the nozzle and other components.
- Lightweight and Compact: The lightweight and compact design of this retaining make it easy to handle and replace, saving time and effort during maintenance and repairs.
- Stable Performance: Despite its small size, this retaining delivers stable performance, ensuring consistent and accurate cuts in various plasma cutting applications.
- Compatible with Plasma Cutting Machines: Designed specifically for use with plasma cutting machines, this retaining is an essential spare part for professionals and hobbyists alike, providing reliable for your cutting nozzle.
- See more on Amazon...
Brand: KJAOYU | Manufacturer: KJAOYU
See On Amazon #26
Newsmarts Gouging Nozzles Tips 220672 Copper For PowerMax 45 Plasma Torch
Asin: B0D3LVVJ8L
Good Function: Precision Lathe Processing Ensures The Product Concentricity; Replace The Broken Plasma Nozzle To Realize The Best Cutting Quality And Reliability; Good Quality Consumables Of These Plasma Cutting Torches Will Make The Welder Feel Comfortable During The Welding Process.
Parcel List: 5Pcs X 220672 Nozzle.
Easy To Use: Replce The Broken Plasma Directly, To Maintain The Plasma Cutter Machine Performance And Guarantee High-Quality Cutting Results.
High Quality Material: The Plasma Nozzle Is Made From Copper, High Hardness, Resistant To Corrosion And Rust, Endure Constant Wear.
Features
- Compatibility Model: The Plasma Nozzle is For PowerMax 45 plasma Torch; Suitable for all Hypertherm Cutmaster series plasma cutters
- High Quality Material: The Plasma Nozzle is made from copper, high hardness, resistant to corrosion and rust, endure constant wear
- Good Function: Precision lathe processing ensures the product concentricity; Replace the broken plasma nozzle to realize the best cutting quality and reliability; Good quality consumables of these plasma cutting torches will make the welder feel comfortable during the welding process
- Easy to use: Replce the broken plasma directly, to maintain the plasma cutter machine performance and guarantee high-quality cutting results
- Parcel List: 5pcs x 220672 Nozzle
- See more on Amazon...
Brand: Newsmarts | Manufacturer: Newsmarts
Dimensions: 0.12 x 0.47 x 0.35 inches | Weight: 0.26 Pounds
See On Amazon #27
ARCCAPTAIN Plasma Cutter 50Amps + Welding Helmet
Asin: B0D3LT9RX6
【Portable & Lightweight】This Plasma Cutter Machine Only Weighs 13 Pounds, Easy To Carry. It's Also Tiny And Light Enough To Move With Strap In Any Workplace(Strap Included)..
【Safety & Durable】 Arccaptain Welder Machine Have Passed A Variety Of Professional Tests And Certifications Including Tüv And Ansi Standards Before Leaving Our Factory. We Provide 30-Day Money Back Guarantee And 2-Years Warranty For You..
【Advanced Digital Technology】You Can Adjust The Post-Flow Time From 5-15 Seconds To Have A Clean Cut. Also Could Select 2T/4T To Have A Comfortable Working Experience. The Exclusive Large Led Design Provides You With An Accurate Data Display And Helps You Read All Data Easier And More Clearly Without Taking Off Your Helmet..
【Easy To Assemble】With A Plug-In Air Filter Connector And Built-In Regulator, Help You To Get Rid Of Tedious Installation Anymore. Only Takes 30 Seconds And You Can Start Cutting..
Features
- EASY TO CUT, POWERFUL PERFORMANCE Automatic dual-voltage 110/220V. With advanced IGBT inverter technology, the maximum severance cut can reach up to 3/4" (20 mm), 1/2" (10mm) ideal clean cut, 60% duty cycle. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc. The recommended current is 50A, the recommended psi is between 20-40psi when connecting 110V, the recommended psi is between 30-60psi when connecting 220V.
- EASY TO ASSEMBLE With a plug-in air filter connector and built-in regulator, help you to get rid of tedious installation anymore. Only takes 30 seconds and you can start cutting.
- PORTABLE & LIGHTWEIGHT This plasma cutter machine only weighs 13 pounds, easy to carry. It's also tiny and light enough to move with strap in any workplace(strap included).
- ADVANCED DIGITAL TECHNOLOGY You can adjust the post-flow time from 5-15 seconds to have a clean cut. Also could select 2T/4T to have a comfortable working experience. The exclusive Large LED design provides you with an accurate data display and helps you read all data easier and more clearly without taking off your helmet.
- SAFETY & DURABLE ARCCAPTAIN welder machine have passed a variety of professional tests and certifications including T V and ANSI standards before leaving our factory. We provide 30-Day Money Back Guarantee and 2-Years Warranty for you.
- See more on Amazon...
Brand: ARCCAPTAIN
See On Amazon #28
Hynade Plasma Cutter Torch Consumables, AG60P Consumables Pilot Arc Cutting Torch Tip Nozzles AG60P AG60 Plasma Torch Consumables for HYC50DP, CUT50H, PLC50DP Plasma Cutter 50 PCS(AG60 parts)
Asin: B08K4B5HLL | Model: AG60 CONS | PartNumber: AG60 CONS | Ean: 0706189866375 | UPC: 706189866375
[Install Easily]:Replace Worn Parts Easily To Complete The Cutting Project Smoothly, Suitable For Diy Work And Small Business Projects.
100% Brand New And High Quality Plasma Cutting Torch Consumables.
[Package Included]:20Pcs Electrodes ,20Pcs Nozzles(Tips) ,5Pcs Shield Cups,5Pcs Brackets.
[Application]:This Ag60p Consumables Have Standard Size ,Suitable For Ag-60 Ag-60P Sg-55 Wsd-60 Plasma Cutting Torch,Suitable For Cut60,Cut60sp,Cut50dp,Cut50pi,Hyc50dvp,Hyc500xp,Hyc550xp,Cut50dh,Plc50dp,Btc500dp,Lgk-60 ,Ltp 5000 Etc Plasma Cutter.
Features
- [Material]:The AG60 AG60P Plasma Cutter Torch Consumables made of Metal+ ceramic,Solid and durable
- [Application]:This AG60P consumables have Standard size ,suitable for AG-60 AG-60P SG-55 WSD-60 plasma Cutting Torch,suitable for CUT60,CUT60SP,CUT50DP,CUT50PI,HYC50DVP,HYC500XP,HYC550XP,CUT50DH,PLC50DP,BTC500DP,LGK-60 ,LTP 5000 etc plasma cutter
- [Install easily]:Replace worn parts easily to complete the cutting project smoothly, suitable for DIY work and small business projects
- [Package included]:20pcs Electrodes ,20pcs Nozzles(Tips) ,5pcs Shield cups,5pcs Brackets
- 100% brand new and high quality plasma cutting torch consumables
- See more on Amazon...
Brand: hynade | Manufacturer: hynade
See On Amazon #29
bestarc AG60P Plasma Cutter Consumables Cutting Torch Tip Nozzles 40 pcs Suitable for AG60 WSD60 AG60P and BTC500DP
Asin: B09YM6ZC81 | Model: 001 | PartNumber: 001 | Ean: 0727431700261 | UPC: 727431700261
Suits For Professional Workers, Amateurs, Home Use, Factory And Garage.
Package Includes: 5Pcs Wire Guide, 5Pcs Shield Cup, 15Pcs Nozzle, 15Pcs Electrode.
This Product Is A Consumable Accessory Of Cutting Machine.
Made Of High Quality Material, Provides Longer Service Life And Better Experience.
Features
- Fit for : AG-60 AG-60P SG-55 WSD-60 Plasma cutter torch head
- Made of high quality material, provides longer service life and better experience
- Suits for professional workers, amateurs, home use, factory and garage
- This product is a consumable accessory of cutting machine
- Package includes: 5PCS wire guide, 5pcs shield cup, 15pcs nozzle, 15pcs electrode
- See more on Amazon...
Brand: bestarc | Manufacturer: bestarc
See On Amazon #30
WeldingStop 40pcs 9-8215 Electrode for Thermal Dynamics SL60 SL100 Cutmaster 52 Plasma Cutting Torch Consumables
Asin: B0CFQ8HZ42 | Model: 9-8215 | PartNumber: 9-8215
Plasma Electrode 9-8215 Can Fit Thermal Dynamics Cutmaster 52 / 82 Cutter With Sl60 Torch.
Weldingstop Oemed Product, Not Original.
Plasma Electrode 9-8215 Can Fit Thermal Dynamics Cutmaster 102 / 152 Cutter With Sl100 Torch.
Plasma Electrode Reference Number : 2Czg8 / 9-8215.
Features
- 40pcs WeldingStop Plasma Consumables type: Plasma electrode
- Plasma Electrode Reference number : 2CZG8 / 9-8215
- Plasma Electrode 9-8215 can fit thermal dynamics cutmaster 52 / 82 cutter with SL60 torch
- Plasma Electrode 9-8215 can fit thermal dynamics cutmaster 102 / 152 cutter with SL100 torch
- WeldingStop OEMed Product, not original
- See more on Amazon...
Brand: WeldingStop | Manufacturer: WeldingStop
See On Amazon
Looking For Something Else?
Search