Best car fuel gas cans - Buying Guide
Last Updated: 05/09/2024
Share on
Bestselling car fuel gas cans on Amazon
- Gas Can Spout Replacement, Gas Can Nozzle, (3 Kit-Yellow) Suitable for Most 1/2/5/10 Gal Oil Cans. G...
- EZ-POUR Gas Can Spout Replacement Multi-Use For Deluxe Gas Cans and Water Jugs (Pack of 1) - 1, 2,...
- Scepter FR1G252 Fuel Container with Spill Proof Smart Control Spout with Bonus Funnel, Red Gas Can, ...
- Scepter Flo N' Go Duramax 14 Gallon Portable Gas Fuel Tank Container Caddy with LE Fluid Transfer Si...
- VP Racing 5.5 Gallon Motorsport Container White and Deluxe Hose (3 Pack)
- Gas Can Spout Replacement, Anti-Spill Gas Can Nozzle Replacement, 2-Kit Gas Can Spouts No Leaky, Upg...
- Gas Cans, VP racing fuel jug hose,racing VP fuel jug, egs Jugs, LC2 Jugs, Scribner Fuel Jugs,Scribne...
- Lisle 19702 Dispenser with Lid and Cap - 8 Quart Capacity,White
- Mission Automotive 2 Pack Hose Bender for Racing Fuel Tanks, Utility Containers, Gas Cans - Heavy Du...
- VP Racing 5.5 Gal. Square Patriotic Motorsport Container w/ 14 Inch Deluxe Filler Hose Close-Trimmed...
#1
Gas Can Spout Replacement, Gas Can Nozzle, (3 Kit-Yellow) Suitable for Most 1/2/5/10 Gal Oil Cans. Gas Spout Replacement, Fuel Can Spout, Gas Tank Nozzle. The tube is soft and flexible to use
Asin: B0CDDQYDJ9
Anti-Overflow Design, (Special Attention: As Shown In The Figure, The Screw Cap Of The Gas Can Spout Cap Is Hexagonal) The Spout Tube And The Spout Cap Are Threaded, And The Spout Cap Has A Rubber Sealing Ring Inside. Tighten The Spout Cap After Use. There Will Be No Oil Overflow Even In The Case Of Transportation Or The Tank Is Down.
Simple To Install, Each Set Of Products Includes, 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread) 3 Yellow Spouts And Rubber Gaskets, 3 Nozzle Caps With Threads, 2 Kinds Of Gas Can Vent Caps, And The Drill Bit Required To Install The Gas Discharge Cap. During The Installation And Use Process, If You Need Assistance, You Can Contact Us, And We Will Serve You As Quickly As Possible.
Can Cover More Oil Cans, We Offer Two Types Of Gas Can Vent Caps, (Gas Can Vent Caps-A) Is Used For Oil Cans Without A Vent At The End Of The Oil Can, You Only Need Simple Drilling And Installation To Use. (Gas Can Vent Caps-B) Is Used For Another Oil Can With A Vent Cap At The Tail, Can Replace Old Vent Caps.
These Kits Are Made Of High Quality Hdpe Material. The Hoses Are Molded In One Piece, With No Steps For Secondary Connections That Will Not Compromise The Toughness And Strength Of The Hose. In Use You Can Bend Freely Without Breaking. Thicker And Widened Rubber Gaskets, Can Better Fit The Bottle Cap, Prevent Liquid Leakage When Refueling.
Features
- Gas Can Spout Replacement, The upgraded gas can spout kit is more compatible and the length of the hose is longer. Oil jug mouth sizes from 1.7in-1.82in both can be used. The total length of the hose is 8.1in, which is more convenient and flexible to use. Please measure your oil cans mouth size before purchasing
- These kits are made of high quality HDPE material. The hoses are molded in one piece, with no steps for secondary connections that will not compromise the toughness and strength of the hose. In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling
- Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down
- Can cover more oil cans, We offer two types of gas can vent caps, (gas can vent caps-A) is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use. (gas can vent caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps
- Simple to install, Each set of products includes, 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread) 3 yellow Spouts and rubber gaskets, 3 nozzle caps with threads, 2 kinds of gas can vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need assistance, you can contact us, and we will serve you as quickly as possible
- See more on Amazon...
Brand: ZORYILUO | Manufacturer: FOANRIY
See On Amazon #2
EZ-POUR Gas Can Spout Replacement Multi-Use For Deluxe Gas Cans and Water Jugs (Pack of 1) - 1, 2, 5 Gallon HI-FLO System with Extension, Flame Arrestor, Flexible Gas Can Nozzle for Jerry Cans
Asin: B00YP3YTXM | Model: EZ Pour - 30051 | PartNumber: EZ Pour - 30051 | Ean: 0721947607793, 0857413003032, 0653395314438, 0827165671964, 5207442859851, 7147905921191 | UPC: 827165671964, 721947607793, 857413003032, 653395314438
Easy-To-Assemble, Revitalizing Gas Cans With Confidence – Say Goodbye To Headaches, Our Hassle-Free Solution Allows Anyone To Revitalize Their Existing Gas Cans And Water Jugs. Ez-Pour Flexible Replacement Is So Versatile. Whether It's Gas Nozzles For Gas Cans, A Diesel Fuel Can Spout, Or A Heavy-Duty Gas Spout, Our Effortless Kit Has Only A Few Easy-To-Identify Components That Will Restore Your Old Gas Can To Its Former Glory. Includes One 8 Inch Hi-Flo Spout And One 8 Inch Extension!.
Eradicate Fuel Spills With Confidence - Bid Farewell To Messy Fuel Spillage With Our Sturdy Gas Spout Replacement. Designed With Your Convenience In Mind, It Includes A Robust Cap, Ensuring Secure And Spill-Free Fuel Transportation And Storage. Whether You're Revitalizing An Older Water Jug Or Seeking A Universal Gas Can Spout Upgrade, The Ez-Pour Rigid Spout Replacement Is The Ultimate Solution. No Worrisome Leaks, Just An Efficient Refueling Experience With Our Top-Tier Spout For Gas Can..
Compatible With A Wide Range Of Gas Cans And Water Jugs – Our Spout Will Seamlessly Fit Most Water Jugs And Gas Cans Including Popular Brands Like Blitz, Briggs Stratton, Eagle, Essence, Gott, Igloo, Midwest, Rubbermaid, And Scepter. Less Hassle Searching For Specific Gas Can Spouts; Our Gas Can Spout Ensures Compatibility For A Consistent Experience Across Various Containers. We’Ve Designed This Replacement Gas Can Spout Kit For Quick Assembly Because Your Time Matters..
A Lightweight & Durable Gas Can Spout Kit - Easily Attach Our Spout For Jerry Cans To Most Gas Cans And Water Jugs For Keeping Spare Gasoline Or Completing Chores For Your Home Or Farm. With This Gas Spout Kit, You Can Have Your Old Gas Cans Looking And Feeling Like New. This Kit Is A Unique Spout, One 8 Inch Hi-Flo Spout And Another 8" Spout Extension For Those Hard-To-Reach Tanks. A 1/2” Replacement Push-In Vent, Filter Screen, And Second Base Cap To Fit Additional Cans Are Also Included..
Features
- LONG & FLEXIBLE UNIVERSAL GAS CAN SPOUT REPLACEMENT - Unlike other gas can replacement parts that are cheap and require replacement again and again EZ POUR Gas Can Spout made with extra-dense material won t crack in the cold. This single gas cap spout is designed to ensure a fast flow letting you spend less time in the cold and more time getting to where you need to go! Unleash the power of endurance and versatility with our gas can nozzle replacement, ensuring extended equipment lifespan.
- A LIGHTWEIGHT & DURABLE GAS CAN SPOUT KIT - Easily attach our spout for jerry cans to most gas cans and water jugs for keeping spare gasoline or completing chores for your home or farm. With this gas spout kit, you can have your old gas cans looking and feeling like new. This kit is a unique spout, one 8 inch HI-FLO spout and another 8 Spout Extension for those hard-to-reach tanks. A 1/2 replacement push-in vent, filter screen, and second base cap to fit additional cans are also included.
- EASY-TO-ASSEMBLE, REVITALIZING GAS CANS WITH CONFIDENCE Say goodbye to headaches, our hassle-free solution allows anyone to revitalize their existing gas cans and water jugs. EZ-POUR Flexible Replacement is so versatile. Whether it's gas nozzles for gas cans, a diesel fuel can spout, or a heavy-duty gas spout, our effortless kit has only a few easy-to-identify components that will restore your old gas can to its former glory. Includes one 8 inch HI-FLO Spout and one 8 inch extension!
- COMPATIBLE WITH A WIDE RANGE OF GAS CANS AND WATER JUGS Our spout will seamlessly fit most water jugs and gas cans including popular brands like Blitz, Briggs Stratton, Eagle, Essence, Gott, Igloo, Midwest, Rubbermaid, and Scepter. Less hassle searching for specific gas can spouts; our gas can spout ensures compatibility for a consistent experience across various containers. We ve designed this replacement gas can spout kit for quick assembly because your time matters.
- ERADICATE FUEL SPILLS WITH CONFIDENCE - Bid farewell to messy fuel spillage with our sturdy gas spout replacement. Designed with your convenience in mind, it includes a robust cap, ensuring secure and spill-free fuel transportation and storage. Whether you're revitalizing an older water jug or seeking a universal gas can spout upgrade, the EZ-POUR rigid spout replacement is the ultimate solution. No worrisome leaks, just an efficient refueling experience with our top-tier spout for gas can.
- See more on Amazon...
Brand: EZ-POUR | Manufacturer: EZ-POUR Store
Dimensions: 13.00 x 13.00 x 7.00 inches | Weight: 0.20 Pounds
Warranty: lifetime
See On Amazon #3
Scepter FR1G252 Fuel Container with Spill Proof Smart Control Spout with Bonus Funnel, Red Gas Can, 2 Gallon
Asin: B08DL9X8RV | Model: FR1G2 | PartNumber: FR1G2 | Ean: 0887853003408 | UPC: 887853003408
Fast Fills – Integrated Air Vent In Spout And Included Funnel Makes For Fast Flows Of Up To 3 Gallons Per Minute, Saving You Time And Hassle.
Safe & Durable – Epa / Carb & Child Safety Compliant, The 5-Layer Construction Prevents Vapor Leaks And Preserves Gasoline Longer.
Flame Mitigation Device – Flame Mitigation Device Helps Prevent Internal Vapor Ignition To Provide An Added Layer Of Protection For A Cleaner, Safer Experience.
Controllable Flow Without Spills – Smartcontrol Controllable Flow Rate Means No Spilling, Allowing You To Squeeze Less For A Little, Or Squeeze More For A Lot; Bonus Funnel With Convenient Storage Ring Making Filling Cars, Atvs Or Other Equipment Easier.
Features
- EASY TO POUR GAS CAN 2-gallon fuel container for easy refilling of lawnmowers, chainsaws, yard tools, recreational vehicles, ATVs, motorcycles, and other gas-powered equipment
- CONTROLLABLE FLOW WITHOUT SPILLS SmartControl controllable flow rate means no spilling, allowing you to squeeze less for a little, or squeeze more for a lot; bonus funnel with convenient storage ring making filling cars, ATVS or other equipment easier
- FAST FILLS Integrated air vent in spout and included funnel makes for fast flows of up to 3 gallons per minute, saving you time and hassle
- FLAME MITIGATION DEVICE Flame mitigation device helps prevent internal vapor ignition to provide an added layer of protection for a cleaner, safer experience
- SAFE & DURABLE EPA / CARB & Child Safety Compliant, the 5-layer construction prevents vapor leaks and preserves gasoline longer
- See more on Amazon...
Brand: Scepter | Manufacturer: Scepter
Dimensions: 11.50 x 7.00 x 7.00 Inches | Weight: 1.03 Pounds
Warranty: 2 year manufacturer
See On Amazon #4
Scepter Flo N' Go Duramax 14 Gallon Portable Gas Fuel Tank Container Caddy with LE Fluid Transfer Siphon Pump and 10 Foot Long Hose, Red
Asin: B000MT94QA | Model: 6792 | PartNumber: 6792
Ean: 0758710428781, 0063923067925, 0752913147975, 0635133305090, 7750162347552, 0650076368094, 0602460361464, 0639230679252, 6861894541352, 0027916021820
UPC: 635133305090, 650076368094, 752913147975, 758710428781, 639230679252, 027916021820, 063923067925, 602460361464
Features 2 Brass Shut Off Valves One At The Tank And One At The Hose. This Allows For Easy Disconnect With No Fuel Spillage.
Patented Pump Handle That Looks Just Like The Ones You Use At The Gas Station. It Features A Child Lock For Added Safety And It Has A Flow Rate Of 2 Gallons Per Minute In The Siphon Mode.
10 Foot Hose Is Automotive-Grade Rubber. And The Caddy Comes Equipped With A Hose Hanger For Easy Storage.
Sturdy Wheels Making It Easy To Transport And You Can Take It To Go Anywhere.
Features
- Duramax 14-gallon fuel tank on wheels, ideal for farm and rural use as well as marine and recreational use
- Sturdy wheels making it easy to transport and you can take it to go anywhere
- Features 2 brass shut off valves one at the tank and one at the hose. This allows for easy disconnect with no fuel spillage
- 10 foot hose is automotive-grade rubber. And the caddy comes equipped with a hose hanger for easy storage
- Patented pump handle that looks just like the ones you use at the gas station. It features a child lock for added safety and it has a flow rate of 2 gallons per minute in the siphon mode
- See more on Amazon...
First Available: 01/19/2007
Brand: Scepter | Manufacturer: Scepter
Dimensions: 33.80 x 16.20 x 12.70 Inches | Weight: 19.00 Pounds
Warranty: 1 Year Limited
See On Amazon #5
VP Racing 5.5 Gallon Motorsport Container White and Deluxe Hose (3 Pack)
Asin: B084BQPD7V | Model: 3xVP-35200 | PartNumber: 3xVP-35200 | Ean: 0193802136661 | UPC: 193802136661
Constructed Of High-Quality, Virgin High-Density Polyethylene That Undergoes A 15-Point Quality Test To Ensure It Can Tolerate The Roughest Treatment.
Includes 14-Inch Hose And Hose Cap For Vp Motorsport And Vp Sportsman Containers.
Perfect For Use With Refilling In Professional Off-Road And Closed-Course Racing, Not For Fuel Used On Highways.
Jug Can Be Used For Racing Fuel Only, Such As Nitromethane Or Methanol, Used In Sanctioned Motorsports.
Features
- This is not a portable fuel container as described by ASTM, EPA, ARB, and other official agencies
- Jug can be used for racing fuel only, such as Nitromethane or Methanol, used in sanctioned motorsports
- Constructed of high-quality, virgin high-density polyethylene that undergoes a 15-point quality test to ensure it can tolerate the roughest treatment
- Perfect for use with refilling in professional off-road and closed-course racing, not for fuel used on highways
- Includes 14-inch hose and hose cap for VP Motorsport and VP Sportsman containers
- See more on Amazon...
Brand: VP Racing | Manufacturer: Plastic Product Formers
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #6
Gas Can Spout Replacement, Anti-Spill Gas Can Nozzle Replacement, 2-Kit Gas Can Spouts No Leaky, Upgraded Replacement Gas Can Spout with Flexible Nozzle, Gas Can Vent, Fit for Most 1/2/5/10 Gal Can
Asin: B0CFXBC4DT
No-Spill Design: Our Gas Tank Nozzle Incorporates A No-Spill Design That Renders A Mess-Free Refueling Experience. The Gas Can Spout Tubes And Caps Are Threaded. The Cap Features A Rubber Sealing Ring Inside. Simply Tighten The Cap(The Hexagonal One) After Use, And Even During Transportation, There Will Be No Oil Spill..
Effortless Installation: Installation Is A Breeze! Each Replacement Gas Spouts Kit Includes Everything You Need: 4 Screw Collar Spouts Caps (2 Coarse Thread & 2 Fine Thread), 2 Spouts Hoses With Rubber Gaskets, 2 Threaded Nozzle Caps, 2 Types Of Gas Can Vent Caps, And Even The Drill Bit Required For The Installation Of The Vent Cap-A. If You Require Any Assistance During The Installation Or Usage Process, We Are Always Ready To Help, Ensuring Prompt And Efficient Service..
Versatility At Its Best: Our Gas Can Spouts Are Designed To Cover A Wide Range Of Cans. We Offer Two Types Of Gas Can Vent Caps To Accommodate Different Needs. Vent Cap A: Perfect For Oil Cans Without A Vent At The End And Requires A Simple Drilling And Installation Process. Vent Cap B: Suitable For Replacement On Barrels With A Vent Cap At The Top..
Uncompromising Quality: Crafted With High-Quality Hdpe Material, Our Replacement Gas Can Spout Kit Guarantees Exceptional Durability. Seamlessly-Molded Hoses Eliminate Any Possibility That Could Compromise Toughness And Strength. Bend The Hoses In Whatever Way You Want, And They Will Not Break..
Features
- ENHANCED COMPATIBILITY AND CONVENIENT LENGTH: Cyluer gas can spout replacement kit boasts superior compatibility, suitable for most 1/2/5/10 gallon gas cans, fitting oil jug mouths ranging from 1.7in to 1.82in. The length of the hose has been extended to 8.1in, ensuring greater convenience and flexibility.
- UNCOMPROMISING QUALITY: Crafted with high-quality HDPE material, our replacement gas can spout kit guarantees exceptional durability. Seamlessly-molded hoses eliminate any possibility that could compromise toughness and strength. Bend the hoses in whatever way you want, and they will not break.
- NO-SPILL DESIGN: Our gas tank nozzle incorporates a no-spill design that renders a mess-free refueling experience. The gas can spout tubes and caps are threaded. The cap features a rubber sealing ring inside. Simply tighten the cap(the HEXAGONAL one) after use, and even during transportation, there will be no oil spill.
- VERSATILITY AT ITS BEST: Our gas can spouts are designed to cover a wide range of cans. We offer two types of gas can vent caps to accommodate different needs. Vent cap A: Perfect for oil cans WITHOUT a vent at the end and requires a simple drilling and installation process. Vent cap B: Suitable for replacement on barrels WITH a vent cap at the top.
- EFFORTLESS INSTALLATION: Installation is a breeze! Each replacement gas spouts kit includes everything you need: 4 screw collar spouts caps (2 coarse thread & 2 fine thread), 2 spouts hoses with rubber gaskets, 2 threaded nozzle caps, 2 types of gas can vent caps, and even the drill bit required for the installation of the vent cap-A. If you require any assistance during the installation or usage process, we are always ready to help, ensuring prompt and efficient service.
- See more on Amazon...
Brand: Cyluer
See On Amazon #7
Gas Cans, VP racing fuel jug hose,racing VP fuel jug, egs Jugs, LC2 Jugs, Scribner Fuel Jugs,Scribner Fuel Jugs, gas can,5 Gallon Gas Can for Racing,Upgraded Filter Design, Trigger Hose
Asin: B0B1PX2Z1Q | Model: Racing Fuel Jug Hose | PartNumber: Racing Fuel Jug Hose
✅A Must For Any Jugs :Universal Thread Spout,Exactly What You Needed To Go With Your Vp Racing Fuel,Jegs Jugs, Lc2 Jugs, Scribner Fuel Jugs，Gas Can Spout Replacement, Gas Can Nozzle.
✅Easy Installation: Installing This Hose Is A Breeze. It Requires Minimal Effort And Can Be Done Quickly Without Any Hassle. Simply Screw It Onto Your Jug And You're Ready To Go..
✅Leak-Proof Design: Say Goodbye To Messy Spills And Leaks! This Hose Screws On Easily And Ensures A Tight Seal, Preventing Any Leaks Or Drips While Pouring. You Can Trust It To Deliver Fuel Smoothly And Efficiently Every Time..
✅Easy To Use: The Threaded Mouth Of These Oiler Hoses Is Designed To Facilitate Your Installation; 2 Iron Hoops Make The Fuel Not Easy To Leak, And The Filter Design Can Prevent Debris From Entering Your Fuel Container; The Transparent Pvc Material Allows You To Real-Time Monitor Internal Status..
Features
- life easier:This filler hose fits in any filling receptacle for this to make the small jobs of filling tillers, pressure washers , boats, lawn mower,trucks and off road vehicle much easier.
- Easy to use: The threaded mouth of these oiler hoses is designed to facilitate your installation; 2 iron hoops make the fuel not easy to leak, and the filter design can prevent debris from entering your fuel container; the transparent PVC material allows you to real-time monitor internal status.
- A Must for any Jugs :Universal thread spout,Exactly what you needed to go with your VP Racing Fuel,Jegs Jugs, LC2 Jugs, Scribner Fuel Jugs Gas Can Spout Replacement, Gas Can Nozzle
- Leak-Proof Design: Say goodbye to messy spills and leaks! This hose screws on easily and ensures a tight seal, preventing any leaks or drips while pouring. You can trust it to deliver fuel smoothly and efficiently every time.
- Easy Installation: Installing this hose is a breeze. It requires minimal effort and can be done quickly without any hassle. Simply screw it onto your jug and you're ready to go.
- See more on Amazon...
Brand: QIANQIAN | Manufacturer: QIANQIAN
See On Amazon #8
Lisle 19702 Dispenser with Lid and Cap - 8 Quart Capacity,White
Asin: B006G3W418 | Model: 19702 | PartNumber: 19702
Ean: 0789393875760, 0083045197027, 0043971297925, 0789393875746, 0971500091778, 0013317005941, 0069060345612, 0789393875777, 0789393875753, 0012304150473, 7355117530425
UPC: 043971297925, 971500091778, 789393875746, 789393875753, 083045197027, 013317005941, 789393875777, 789393875760, 012304150473, 069060345612
Many Large Suvs And Trucks Now Require More Oil..
Translucent White Polyethylene Material Enables The User To Read The Oil Level On The Container Up To 8 Quarts And Is Marked In Both Quarts And Liters..
Flexible, Removable 8" Pouring Spout Enables Easy Transfer Of Liquid..
Works Great To Transport Bulk Oil..
Our Popular 8 Quart Dispenser With A Spout Cap And Lid To Keep Out Dirt, Dust And Other Contaminants..
Features
- Now With a Spout Cap and Lid to Keep Out Contaminants.
- Our popular 8 Quart Dispenser with a spout cap and lid to keep out dirt, dust and other contaminants.
- Many large SUVs and trucks now require more oil.
- Works great to transport bulk oil.
- Translucent white polyethylene material enables the user to read the oil level on the container up to 8 quarts and is marked in both quarts and liters.
- Flexible, removable 8 pouring spout enables easy transfer of liquid.
- See more on Amazon...
First Available: 09/08/2012
Brand: Lisle | Manufacturer: Lisle
Dimensions: 18.50 x 6.50 x 22.50 inches | Weight: 1.14 Pounds
Warranty: Limited Lifetime
See On Amazon #9
Mission Automotive 2 Pack Hose Bender for Racing Fuel Tanks, Utility Containers, Gas Cans - Heavy Duty - Compatible with VP, Sportsman, Rural King and more. Provides the Ideal Bend for Your Fuel Hose
Asin: B07XDDH7HD | Ean: 0850008283369 | UPC: 850008283369
Bends Hose To Perfect Angle: Gives You That “Extra Hand” In Refilling Tanks By Bending The Hose To The Perfect Angle, Leaving You To Easily Lift The Utility Container, Gas Can Or Jug..
Great Value: Our Package Comes With Two Durable Hose Benders That Can Be Used One At A Time Or Both At The Same Time Depending On The Angle Needed To Refill Tanks. Plus, It Comes With The Added Benefit Of Saving On Costly Fuel Spillage..
Easy And Precise Refilling Of Tanks: Fill In A Fraction Of The Time. Our Hose Bender Makes Refilling Tanks And Jugs A Breeze And Make Awkward, Back-Breaking And Messy Tank Filling A Thing Of The Past..
Durable And Gas-Resistant: A Little Thicker. A Little Longer. A Whole Lot Longer Lasting. Made With Heavy Duty Petroleum-Resistant Plastic That Makes It More Durable And Long Lasting. You Really Have To Try To Break This Bad Boy!.
Features
- Fill Faster & Easier: Cleverly designed to bend the hose of containers and jugs to the optimum angle for refilling tanks or refueling dirt bikes, mowers, cars, trucks and boats. Compatible with LC2 Racing Utility Containers, VP Racing and other Containers and Jugs.
- Durable And Gas-Resistant: A little thicker. A little longer. A whole lot longer lasting. Made with heavy duty petroleum-resistant plastic that makes it more durable and long lasting. You really have to try to break this bad boy!
- Bends Hose To Perfect Angle: Gives you that extra hand in refilling tanks by bending the hose to the perfect angle, leaving you to easily lift the utility container, gas can or jug.
- Easy And Precise Refilling Of Tanks: Fill in a fraction of the time. Our hose bender makes refilling tanks and jugs a breeze and make awkward, back-breaking and messy tank filling a thing of the past.
- Great Value: Our package comes with two durable hose benders that can be used one at a time or both at the same time depending on the angle needed to refill tanks. Plus, it comes with the added benefit of saving on costly fuel spillage.
- See more on Amazon...
Brand: Mission Automotive | Manufacturer: Mission Automotive
Weight: 0.00 Pounds
See On Amazon #10
VP Racing 5.5 Gal. Square Patriotic Motorsport Container w/ 14 Inch Deluxe Filler Hose Close-Trimmed Cap and Neck for Tighter Seal
Asin: B01KGCVNNO | Model: 35221 | PartNumber: 35221
Quality Material: Containers Are Constructed Of High-Quality, High-Density Polyethylene That Undergoes A 15-Point Quality Test To Ensure It Can Tolerate The Roughest Treatment.
Ergonomic Handle: Pours Easily With A Contoured Handle And Square Bottom Grip For Easier Lifting; Features A Multipurpose Cap And Rubber Gaskets To Prevent Leaks.
For Storage And Transport Of Recyclable Automotive Fluids, Non-Potable Water, Feed Attractants, And Other Outdoor Products..
Wide Neck & Non-Breakable Lid: Remove Jug Cap For 2.5" Wide Spout With Vent Or Attach Bendable Hose For Controlled Pouring At Difficult Angles.
Vp Racing Deluxe Hose Is Designed To Fit Vp Motorsport And Vp Sportsman Containers; Detachable Hose Cap Included.
Features
- VP Racing 5.5-Gallon capacity container can be used to store, carry, and disperse animal feed and attractants, water, and other outdoor products.
- VP Racing Deluxe Hose is designed to fit VP Motorsport and VP Sportsman containers; detachable hose cap included
- QUALITY MATERIAL: Containers are constructed of high-quality, high-density polyethylene that undergoes a 15-point quality test to ensure it can tolerate the roughest treatment
- WIDE NECK & NON-BREAKABLE LID: Remove jug cap for 2.5 wide spout with vent or attach bendable hose for controlled pouring at difficult angles
- ERGONOMIC HANDLE: Pours easily with a contoured handle and square bottom grip for easier lifting; Features a multipurpose cap and rubber gaskets to prevent leaks
- For storage and transport of recyclable automotive fluids, non-potable water, feed attractants, and other outdoor products.
- See more on Amazon...
Brand: VP Racing | Manufacturer: Plastic Product Formers
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #11
Replacement Gas Can Spouts Improved Design Gasket Flexible Pour Nozzle with Vent Cap for Older Gas Can Fuel Water Jug 1 2 5 Gallon White
Asin: B0B63KKYQM
Push - In Vent Cap For Faster And Safer Emptying, Lanyard For Retaining The Cap To Prevent Loss.
Each Kit Includes: (1) Filler Nozzle, (1) Spout Cap With Lanyard, (1) "O" Ring Gasket, (2) Base Caps, (1) Yellow Push-In Vent Cap,(1)Black Rear Vent Cap,(1)Drill Bit. 3 Kits Included.
Compatible With Most Of Gas Cans And 1/2/5/10 Gallon: Universal Gas Can Spout Kit Comes With Two Different Collar Screw Cap, Fine Thread And Coarse Thread Collar Cap ,Fit Most Of The Cans.
Flexible Nozzle Can Be Bent To Adjust Various Angles Make Gas/Water Easily Flows Out Without The Need For Other Devices And No More Spilling.
Features
- Fuel can spouts are made of high strength ABS plastic, improved gasket more reliable and no leak
- Flexible nozzle can be bent to adjust various angles make gas/water easily flows out without the need for other devices and no more spilling
- Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss
- Compatible with Most of gas cans and 1/2/5/10 gallon: Universal gas can spout kit comes with two different collar screw cap, fine thread and coarse thread collar cap ,fit most of the cans
- Each kit includes: (1) Filler nozzle, (1) spout cap with Lanyard, (1) O ring gasket, (2) base caps, (1) yellow push-in vent cap,(1)black rear vent cap,(1)drill bit. 3 Kits included
- See more on Amazon...
Brand: WHSSFINE
See On Amazon #12
Midwest Can Company 5610 5-Gallon EPA & CARB Compliant Gas Can Fuel Container Jug with Spout and Flame Shield System, Red
Asin: B07KQKMJ1R | Model: Midwest Can - 5610 | PartNumber: Midwest Can - 5610 | Ean: 0079223056101 | UPC: 079223056101
Tough Construction: Constructed With Durable Hdpe With A Vapor Barrier.
Quick-Flow Nozzle: Quick-Flow Spout Makes Fueling Up Faster So You Can Get Back To Work.
Flame Shield For Safety: Flameshield Safety System Features 2 Layers Of Protection From Sparking Accidental Fires.
Epa And Carb Compliant: Designed To Meet Or Exceed Carb And Epa Requirements.
Features
- KEEP YOUR MACHINES FUELED: Easy-to-use 5-gallon gas can to keep your lawnmower, trimmers, and other outdoor power equipment fueled; Dimensions (L x W x H): 13 x 10 x 14.5 inches
- EPA AND CARB COMPLIANT: Designed to meet or exceed CARB and EPA requirements
- TOUGH CONSTRUCTION: Constructed with durable HDPE with a vapor barrier
- FLAME SHIELD FOR SAFETY: FlameShield safety system features 2 layers of protection from sparking accidental fires
- QUICK-FLOW NOZZLE: Quick-flow spout makes fueling up faster so you can get back to work
- See more on Amazon...
First Available: 07/01/2019
Brand: Quick-Flow Spout | Manufacturer: Midwest Can
Dimensions: 14.50 x 13.00 x 10.00 inches | Weight: 1.00 pounds
Warranty: 1 year limited
See On Amazon #13
33 Pcs Gas Can Spout Replacement Kit,Gas Can Spout Replacement Fits 5 Gallon Gasoline Cans,with Flexible Nozzles,Screw Collar Caps
Asin: B0BYYGBB18
【Smooth-Flow】With Two Types Of Vent Caps, Our Gas Can Spouts Allows For Easy Pouring..
【Multiple Uses】This Gas Can Spout Replacement Kit Works Great For Refilling Various Equipment Such As Lawnmowers, Boats, Cars, Motorcycles, And More. It's A Great Value For Your Money And An Extremely Convenient Addition To Any Gas Can!.
【Easy To Use & Excellent Performance】The Design Of These Gas Can Spouts Prevents Spills And Leaks, Even During Transport Or When Upside Down. All Seals Work Great, And Installation Is Easy To Improve Gas Can Performance..
【High-Quality & Durable Materials】The Spouts Are Made Of High-Quality Hdpe Material That Is Bendable And Durable, Featuring Thicker And Widen Rubber Gaskets For Easy And Tight Fitting To Gas Cans..
Features
- Gas Can Spout Replacement This kit includes 33 pieces for hassle-free gas can spout replacement, including pour spouts with rubber gaskets, screw collar caps, spout caps, sealing gaskets, gasket stoppers, vent caps, and a drill bit of the proper size.
- High-Quality & Durable Materials The spouts are made of high-quality HDPE material that is bendable and durable, featuring thicker and widen rubber gaskets for easy and tight fitting to gas cans.
- Smooth-Flow With two types of vent caps, our gas can spouts allows for easy pouring.
- Easy to Use & Excellent Performance The design of these gas can spouts prevents spills and leaks, even during transport or when upside down. All seals work great, and installation is easy to improve gas can performance.
- Multiple Uses This gas can spout replacement kit works great for refilling various equipment such as lawnmowers, boats, cars, motorcycles, and more. It's a great value for your money and an extremely convenient addition to any gas can!
- See more on Amazon...
Brand: Esploratori
See On Amazon #14
Midwest Can 2310 Quick-Flow Gas Can - 2 Gallon
Asin: B000QDHENM | Model: 2300 | PartNumber: 2300 | Ean: 6953278386298, 0079223023004, 0732233475378, 0023899537686 | UPC: 732233475378, 079223023004, 023899537686
Virtually Eliminates Hydrocarbon Emissions.
Virtually Eliminates Hydrocarbon Emissions.
Exceeds California Air Resource Board (Carb) And Epa Requirements For Portable Fuel Containers.
Self-Venting.
Durable Hdpe.
Holds 2 Gallons And 8 Ounces Of Gas And Oil Mixes.
Holds 2 Gallons And 8 Ounces Of Gas And Oil Mixes.
Durable Hdpe.
Features
- Fit Type: Universal Fit
- Durable HDPE
- Virtually eliminates hydrocarbon emissions
- Holds 2 gallons and 8 ounces of gas and oil mixes
- Self-venting
- Durable HDPE
- Virtually eliminates hydrocarbon emissions
- Exceeds California Air Resource Board (CARB) and EPA requirements for portable fuel containers
- Holds 2 gallons and 8 ounces of gas and oil mixes
- See more on Amazon...
First Available: 07/12/2013
Brand: Midwest Can | Manufacturer: Stens
Dimensions: 7.90 x 10.10 x 9.45 Inches | Weight: 1.10 Pounds
See On Amazon #15
10 Pack Replacement YELLOW SPOUT CAPS Top Hat Style fits # 900302 900092 BLITZ Gas Can Spout Cap fits self venting gas can Aftermarket (SPOUTS NOT INCLUDED)
Asin: B074RNG1JB | Model: GV-Spout-Cap-10pk | PartNumber: GV-Spout-Cap-10pk
Measures Approximately: Outside Diameter: 1.30 Inches / Inside Diameter: .85 Inch / Height: .945 Inch.
Fits Blitz Self-Venting Spouts Only ~(Spouts Are Not Included).
Quantity: 10 Pack ~ Keeps Dirt And Debris Out Of Your Can ~ Easy Installation ~ Made In Usa!.
Replaces The Following Part Numbers: 900092, 900094, 9000302.
Features
- New JSP Brand Aftermarket Blitz Yellow Spout Cap ~ Top Hat Style
- Replaces the following Part Numbers: 900092, 900094, 9000302
- Measures Approximately: Outside Diameter: 1.30 inches / Inside Diameter: .85 inch / Height: .945 inch
- Quantity: 10 Pack ~ Keeps dirt and debris out of your can ~ Easy Installation ~ Made in USA!
- Fits Blitz Self-Venting Spouts ONLY ~(SPOUTS ARE NOT INCLUDED)
- See more on Amazon...
Brand: JSP Manufacturing | Manufacturer: JSP Manufacturing
Dimensions: 2.00 x 1.00 x 1.00 inches | Weight: 0.06 Pounds
See On Amazon #16
Scepter 08669 Rectangular 12 Gallon Low Profile Marine Fuel Tank For Outboard Engine Boats, 24.5-Inches x 18-Inches x 11.5-Inches, Red
Asin: B004APFLPA | Model: 08669 | PartNumber: 08669 | Ean: 7442554621615, 0063923086698 | UPC: 063923086698
Integrated Molded Hand Holds Make Transporting This Fuel Tank Effortless.
Molded From Uv Stabilized, High Density Polyethylene For Long Life.
Convenient Combination Fuel Pick-Up/Sight Gauge Accepts Standard 1/4 Npt Marine Tank Fittings.
Rugged One-Piece, Tank Shell Construction Designed To Reduce Fuel Evaporation And Retains Octane Value For Longer Periods.
Features
- 12 Gallon capacity measures 24.5"L x 18.1"W x 11.5"H and is great for outboard engine boats and boaters who want longer running time
- Rugged one-piece, tank shell construction designed to reduce fuel evaporation and retains octane value for longer periods
- Integrated molded hand holds make transporting this fuel tank effortless
- Convenient combination fuel pick-up/sight gauge accepts standard 1/4 NPT marine tank fittings
- Molded from UV stabilized, high density polyethylene for long life
- See more on Amazon...
First Available: 01/01/2023
Brand: Scepter | Manufacturer: Scepter Marine
Dimensions: 14.75 x 23.25 x 14.25 inches | Weight: 7.90 pounds
Warranty: 1 Year
See On Amazon #17
Gas Can Spout Replacement, Anti-Spill Gas Can Nozzle Replacement, 3-Kit Gas Can Spouts No Leaky, Upgraded Replacement Gas Can Spout with Flexible Nozzle, Gas Can Vent, Fit for Most 1/2/5/10 Gal Can
Asin: B0CGTN1RDL
Uncompromising Quality: Crafted With High-Quality Hdpe Material, Our Gas Can Nozzle Guarantees Exceptional Durability. Seamlessly Molded Hoses Eliminate Any Possibility That Could Compromise Toughness And Strength. Bend The Hoses In Whatever Way You Want, And They Will Not Break..
Effortless Installation: Installation Is A Breeze! Each Set Includes Everything You Need: 6 Screw Collar Caps (3 Coarse Thread & 3 Fine Thread), 3 Spouts Hoses With Rubber Gaskets, 3 Threaded Nozzle Caps, 2 Types Of Gas Can Vent Caps, And Even The Drill Bit Required For The Installation Of The Cap. If You Require Any Assistance During The Installation Or Usage Process, Our Dedicated Customer Support Team Is Always Ready To Help, Ensuring Prompt And Efficient Service..
Anti-Spill Design: Our Replacement Gas Can Spouts Incorporate An Anti-Spill Design That Renders A Mess-Free Refueling Experience. The Gas Can Spout Tubes And Caps Are Threaded. The Cap Features A Rubber Sealing Ring Inside. Simply Tighten The Spout Cap(The Hexagonal One) After Use, And Even During Transportation, There Will Be No Oil Spill..
Versatility At Its Best: Our Product Is Designed To Cover A Wide Range Of Oil Cans. We Offer Two Types Of Gas Can Vent Caps To Accommodate Different Needs. Vent Cap A: Perfect For Oil Cans Without A Vent At The End And Requires A Simple Drilling And Installation Process. Vent Cap B: Suitable For Replacement On Barrels With A Vent Cap At The Top..
Features
- ENHANCED COMPATIBILITY AND CONVENIENT LENGTH: Cyluer gas can spout replacement kit boasts superior compatibility, suitable for most 1/2/5/10 gal oil cans, fitting oil jug mouths ranging from 1.7in to 1.82in. The length of the hose has been extended to 8.1in, ensuring greater convenience and flexibility.
- VERSATILITY AT ITS BEST: Our product is designed to cover a wide range of oil cans. We offer two types of gas can vent caps to accommodate different needs. Vent cap A: Perfect for oil cans WITHOUT a vent at the end and requires a simple drilling and installation process. Vent cap B: Suitable for replacement on barrels WITH a vent cap at the top.
- UNCOMPROMISING QUALITY: Crafted with high-quality HDPE material, our gas can nozzle guarantees exceptional durability. Seamlessly molded hoses eliminate any possibility that could compromise toughness and strength. Bend the hoses in whatever way you want, and they will NOT break.
- ANTI-SPILL DESIGN: Our replacement gas can spouts incorporate an anti-spill design that renders a mess-free refueling experience. The gas can spout tubes and caps are threaded. The cap features a rubber sealing ring inside. Simply tighten the spout cap(the hexagonal one) after use, and even during transportation, there will be no oil spill.
- EFFORTLESS INSTALLATION: Installation is a breeze! Each set includes everything you need: 6 screw collar caps (3 coarse thread & 3 fine thread), 3 spouts hoses with rubber gaskets, 3 threaded nozzle caps, 2 types of gas can vent caps, and even the drill bit required for the installation of the cap. If you require any assistance during the installation or usage process, our dedicated customer support team is always ready to help, ensuring prompt and efficient service.
- See more on Amazon...
Brand: Cyluer
See On Amazon #18
Gas Can Spout Replacement Improved Design Flexible Pour Nozzle Kit with Gasket Stopper Vent Cap Collar Caps for Old Style Water Gas Container Jug Pack of 3
Asin: B08T8FTWMV | Ean: 0647097247262 | UPC: 647097247262
Push - In Vent Cap For Faster And Safer Emptying, Lanyard For Retaining The Cap To Prevent Loss.
Each Kit Includes: (1) Filler Nozzle, (1) Spout Cap With Lanyard, (1) "O" Ring Gasket, (2) Base Caps, (1) Yellow Push-In Vent Cap,(1)Black Rear Vent Cap. 3 Kits Included.
Flexible Nozzle Make Gas/Water Easily Flows Out Without The Need For Other Devices And No More Spilling.
Replacement Gas Can Spout Kit Update Your Old Cans Instead Of Buying A New One.
Features
- Fuel tank spouts are made of high strength ABS plastic, improved gasket no leak
- Replacement gas can spout kit update your old cans instead of buying a new one
- Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss
- Flexible nozzle make gas/water easily flows out without the need for other devices and no more spilling
- Each kit includes: (1) Filler nozzle, (1) spout cap with Lanyard, (1) O ring gasket, (2) base caps, (1) yellow push-in vent cap,(1)black rear vent cap. 3 Kits included
- See more on Amazon...
Brand: Nother
See On Amazon #19
VP Racing 5.5 Gallon Motorsport Racing Liquid Container Utility Jug Can with Contoured Handle, Multipurpose Cap and Rubber Gaskets, White
Asin: B003TTYUHS | Model: 3522 | PartNumber: 3522 | Ean: 0846781000071, 0846781000293 | UPC: 846781000071, 846781000293
Ideal For Use With Refilling In Professional Off-Road And Closed-Course Racing, Not For Gas Used On Highways..
Forms A Water-Tight Seal With The Rubber Gasket For Secure Pouring..
Features A Non-Breakable, Multipurpose Cap And Rubber Gaskets To Prevent Leaks..
Constructed Of High-Quality, Virgin High-Density Polyethylene That Undergoes A 15-Point Quality Test To Ensure It Can Tolerate The Roughest Treatment..
Features
- This 5.5-gallon jug can be used for racing gas only, such as Nitromethane or Methanol, used in sanctioned motorsports.
- Constructed of high-quality, virgin high-density polyethylene that undergoes a 15-point quality test to ensure it can tolerate the roughest treatment.
- Ideal for use with refilling in professional off-road and closed-course racing, not for gas used on highways.
- Features a non-breakable, multipurpose cap and rubber gaskets to prevent leaks.
- Forms a water-tight seal with the rubber gasket for secure pouring.
- See more on Amazon...
First Available: 04/25/2012
Brand: VP Racing | Manufacturer: VP Racing Fuels
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 2.95 Pounds
See On Amazon #20
Midwest Can Company 5610 5 Gallon Gas Can Fuel Container Jugs w/Spout (2 Pack)
Asin: B08CJMJRZ6 | Model: Midwest Can - 5610 - 2/Pack | PartNumber: Midwest Can - 5610 - 2/Pack | Ean: 0193802172423 | UPC: 193802172423
Flameshield System Features 2 Layers Of Protection From Sparking Accidental Fires.
Size: 5 Gallons (2 Pack).
Spout Makes Fueling Up Faster So You Can Get Back To Work.
Constructed With Durable Hdpe With A Vapor Barrier.
Features
- Easy-to-use 5-gallon gas can to keep your lawnmower, trimmers, and other outdoor power equipment fueled
- Constructed with durable HDPE with a vapor barrier
- FlameShield system features 2 layers of protection from sparking accidental fires
- Spout makes fueling up faster so you can get back to work
- Size: 5 gallons (2 Pack)
- See more on Amazon...
Brand: Midwest Can | Manufacturer: Midwest Can
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.00 Pounds
See On Amazon #21
Gas Fuel Tank Assy TB146EC TB575EC TB525EC TB590EC For MP429,Replacement for Troy-Bilt OEM
Asin: B0D3M29FVK | Model: HLI4578 | PartNumber: HLI4578 | Ean: 0639395354568 | UPC: 639395354568
Gas Tank Assy For Models: 316791960,316791961,316772380,316791910,316791210,316791700,316791840,316791841,316791931,316791932,316773800,316299370,316299371,316299372 Replace Part # For 753-06240,753-05256,753-06797 Package Includes: 1 X Gas Fuel Tank Assembly.
Edger,Cultivator,Tiller,Etc Trimmers Fuel Tank Fits More Models ,As Following: For Mp429,Mp479, For Tb146ec,Tb575ec,Tb525ec,Tb590ec And For Bc5090 Cc148..
Features
- We are located locally and will deliver the product to you as quickly as possible.
- edger,cultivator,tiller,etc trimmers Fuel Tank Fits more models ,as following: For MP429,MP479, for TB146EC,TB575EC,TB525EC,TB590EC and for BC5090 CC148.
- Gas Tank Assy For models: 316791960,316791961,316772380,316791910,316791210,316791700,316791840,316791841,316791931,316791932,316773800,316299370,316299371,316299372 Replace Part # For 753-06240,753-05256,753-06797 Package includes: 1 x Gas Fuel Tank Assembly
- See more on Amazon...
Brand: NSHUNYI | Manufacturer: NSHUNYI
Dimensions: 1.00 x 1.00 x 1.00 Inches
Warranty: 365 days
See On Amazon #22
VEVOR Transfer Tank, 5.3 Gallon/20L Portable Storage Transfer Container with Flexible Spout System, Rustproof Heat-resistant Steel Transfer Tank for Cars Trucks Equipment, Yellow
Asin: B0D3GVD8R1 | Model: JBYT-1X20LYE | PartNumber: JBYT-1X20LYE | Ean: 0197988401704 | UPC: 197988401704
No Leaks No Fumes: The Unique Cap With An Airtight Sealing Gasket Seals Completely, No Leakage Or Fumes To Escape Even Set Flat On The Back Seat. The Anti-Slide Locking Pin Further Secures The Latch, Making It Unlocked Only With Manual Operation To Prevent Accidents..
Portable Design: This Transfer Tank Container Is Equipped With Ergonomic Handles For Two-Man Lifting To Make Operation Easier. It Has A Compact Size Of 13.6" X 6.7" X 18.5" (L X W X H), Making It An Ideal Container And Takeing Up Little To No Space In Your Car..
Bendable Spout For Every Drop: Compare With Short Spout On The Market, Our Flexible Spout Is 12In / 300Mm Long And It Can Be Bent To Any Angle. The Spout Mechanism Allows You To Pour At A High Flow Rate And Save Time For Using..
High Quality Transfer Can: Seamlessly Welded With 0.8-Mm Thickened Cold-Rolled Steel, This Military-Style Transfer Tank Is Sturdy Enough To Bear A Grown Man’S Weight. It Is Coated With Rustproof Paint And Has A Concave Bottom Edge That Significantly Reduces Wear. Store Safely For The Long Term..
Features
- Fill Up Anytime: Still lining up in a long queue for refueling? Had to push your car because of no fuel? Our portable transfer tank is the perfect thing to prevent those events. Sufficient capacity of 5 gallons help you reach your destination. Put our portable transfer container in the trunk and no more worries about running out halfway through the trip.
- High Quality Transfer Can: Seamlessly welded with 0.8-mm thickened cold-rolled steel, this military-style transfer tank is sturdy enough to bear a grown man s weight. It is coated with rustproof paint and has a concave bottom edge that significantly reduces wear. Store safely for the long term.
- No Leaks No Fumes: The unique cap with an airtight sealing gasket seals completely, no leakage or fumes to escape even set flat on the back seat. The anti-slide locking pin further secures the latch, making it unlocked only with manual operation to prevent accidents.
- Bendable Spout for Every Drop: Compare with short spout on the market, our flexible spout is 12in / 300mm long and it can be bent to any angle. The spout mechanism allows you to pour at a high flow rate and save time for using.
- Portable Design: This transfer tank container is equipped with ergonomic handles for two-man lifting to make operation easier. It has a compact size of 13.6 x 6.7 x 18.5 (L x W x H), making it an ideal container and takeing up little to no space in your car.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
See On Amazon #23
16Gal Fuel Caddy | 3.7 Gal/min | Fuel Transfer Tank with Electric Pump & Wheels | 6.6-Foot Long Hose| Red
Asin: B0D3L2LSQZ
【Pump Compatibilty】Hose Is Made Of Highly Durable Polyethylene Plastic With Resistance To Rust & Corrosion.Applications Gasoline,Diesel, Kerosene,Light Oils,Non-Potable Water,Urea And More. The Battery Pump Can Be Taken Out For Independent Use.
【High Capacity】60L Gasoline Capacity Stores Enough Fuel For Multiple Vehicles.Sturdy,Wheels And Heavy-Duty Top Handle Lets You Maneuver The Gas Tank Over Rough Terrain; Made Of High-Density Polyethylene And Resists Corrosion And Denting. Caution: Please Loosen The Vent Cap When Using And Tighten It After Use..
【Easy To Carry And Place】Keep It In Your Truck Trunk, Garage, Shop, Scrapyard, Toolkit Or Shed For Quick, Clean, Dependable Liquid Transfer, Great For Cars, Motorcycles, Boats, Lawn Mowers, Snowblowers, Etc..
【Fuel Transfer Pump Specs】Flow Range (Gpm) 2.3/3.7; Working Amps 6.2A; Max Amps 8A; Voltage: 12V Dc; Power:1/10Hp; Max.Head: 19Ft, Max. Suction: 4.9Ft..
Features
- Portable Fuel Caddy With Pump Easy, Multipurpose Electric Transfer Pump Allows You to Fill & Empty Liquid at Top Speed. For a Variety of Industries & Applications: Automotive, Lawn, Aquariums, Generators, Etc.
- Fuel Transfer Pump Specs Flow Range (GPM) 2.3/3.7; Working Amps 6.2A; Max Amps 8A; Voltage: 12V DC; Power:1/10HP; Max.Head: 19FT, Max. Suction: 4.9FT.
- Pump Compatibilty Hose is Made of Highly Durable Polyethylene Plastic with Resistance to Rust & Corrosion.Applications Gasoline,diesel, kerosene,light oils,non-potable water,urea and more. The battery pump can be taken out for independent use
- Easy to Carry and Place Keep it in Your truck trunk, Garage, Shop, Scrapyard, Toolkit or Shed for Quick, Clean, Dependable Liquid Transfer, Great for Cars, Motorcycles, Boats, Lawn Mowers, Snowblowers, Etc.
- High Capacity 60L gasoline capacity stores enough fuel for multiple vehicles.Sturdy,wheels and heavy-duty top handle lets you maneuver the gas tank over rough terrain; Made of high-density polyethylene and resists corrosion and denting. Caution: Please loosen the vent cap when using and tighten it after use.
- See more on Amazon...
Brand: Generic
Weight: 24.25 Pounds
See On Amazon #24
Oil Mixing Bottle, 2PCS 600ML 2 Stroke Oil Petrol Fuel Mix Bottle Professional Oil Mixing Bottle Container for Chainsaw Ironing Machine
Asin: B0D3KRQV9X | Model: SIXRUN5c0n8pbhem | PartNumber: SIXRUN5c0n8pbhem
[Versatile Usage] : Suitable For A Wide Range Of Applications Including Chainsaws And Ironworking Machines..
[ Performance] : Crafted With High Accuracy, This Container Guarantees Optimal Results..
[Large Capacity] : The Oil Mixing Bottle Boasts A 600Ml Capacity For Precise Two-Stroke Mixing..
[Perfect Complement] : The 600Ml Mixing Bottle Perfectly Complements Your Machine As An Essential Garden Tool Accessory..
Features
- [ Material] : Made of nylon plastic, this bottle ensures durability and prolongs machine life.
- [Perfect Complement] : The 600ml mixing bottle perfectly complements your machine as an essential garden tool accessory.
- [Versatile Usage] : Suitable for a wide range of applications including chainsaws and ironworking machines.
- [Large Capacity] : The oil mixing bottle boasts a 600ml capacity for precise two-stroke mixing.
- [ Performance] : Crafted with high accuracy, this container guarantees optimal results.
- See more on Amazon...
Brand: SIXRUN | Manufacturer: SIXRUN
See On Amazon #25
15Gal Fuel Caddy | 2 Gal/min | Fuel Transfer Tank with Hand Siphon Pump & Wheels | 10-Foot Long Hose| Red
Asin: B0D3KTZ22K
【Versatile Accessories】Not Only Does The Fuel Caddy Come With A High Quality Hand Pump, But It Also Comes With Wheels For Easy Mobility, Which Makes Transferring Fuel Between Locations Incredibly Easy. Whether You Are Moving Between Campgrounds Or Need To Transport Fuel Between Work Sites, This Design With Wheels Greatly Reduces The Burden Of Lifting..
【Flexible Connection】To Make Refueling Easier And More Flexible, This Fuel Caddy Comes With A 10-Foot Long Hose. This Length Ensures Easy Fuel Refueling Even When The Tank And Equipment Are Far Apart, Reducing The Risk Of Leaks And Providing A Greater Range Of Operation..
【Fast Transfer】Equipped With An Efficient Hand Pump, This Fuel Caddy Is Able To Quickly Transfer Fuel At A Rate Of 2 Gallons Per Minute, Saving You Time And Labor. This Fast Transfer Capability Is Perfect For Emergencies Or When You Need To Complete A Refueling Task As Quickly As Possible, And The Combination Of Efficiency And Speed Makes The Refueling Process Easy And Enjoyable..
Features
- Large Capacity Design Designed with user-friendliness in mind, this Fuel Caddy a spacious 15-gallon tank that ensures you can continue to use it for longer periods of time during outdoor activities without having to refill it frequently. Whether you use it for generators, outdoor equipment, or other devices that require fuel, this little refueling helper has you covered.
- Fast Transfer Equipped with an efficient hand pump, this Fuel Caddy is able to quickly transfer fuel at a rate of 2 gallons per minute, saving you time and labor. This fast transfer capability is perfect for emergencies or when you need to complete a refueling task as quickly as possible, and the combination of efficiency and speed makes the refueling process easy and enjoyable.
- Versatile Accessories Not only does the Fuel Caddy come with a high quality hand pump, but it also comes with wheels for easy mobility, which makes transferring fuel between locations incredibly easy. Whether you are moving between campgrounds or need to transport fuel between work sites, this design with wheels greatly reduces the burden of lifting.
- Flexible connection To make refueling easier and more flexible, this Fuel Caddy comes with a 10-foot long hose. This length ensures easy fuel refueling even when the tank and equipment are far apart, reducing the risk of leaks and providing a greater range of operation.
- See more on Amazon...
Brand: Generic
Weight: 21.72 Pounds
See On Amazon #26
Oil Container Automotive, Translucent High Density Graduated Measuring Container, 1.5l Measuring Oil Container, Bucket with Lid for Chain Saw Brush Cutter, Trimmer
Asin: B0D3HB9RTC | Ean: 0782364112420 | UPC: 782364112420
Prevent Spills And Waste: Achieve Precise Mixing Ratios Effortlessly With This Oil Mixing Bottle. The Specially Designed Nozzle And Filling Point Prevent Spills And Waste, Making Pouring And Separation A Breeze. Optimize Engine Performance With Ease..
Durability Abs Material: The Oil Mixing Bottle Is Made Of Sturdy Abs Material That Ensures Long-Lasting Performance. Its Design Ensures Impact And Wear Resistant, Making It A Choice For Daily Use..
Efficient Mixing: Designed With A 1.5L Capacity And Clear Scale Markings, Mixing Oil And Has Never Been Easier. Always Get The Perfect Mix Ratio For Optimal Engine Performance..
Widely Applicable: Not Only A Vessel For Your Oil Mixtures, This Bottle Serves As An Indispensable Accessory For Gardening Tools, Enhancing The Performance Of Chain Saws And Lawn Mowers With Its Multifunctional Use..
Features
- Operate with Ease: Promote your vehicle's performance with the simple-to-use Oil Mixing Bottle. Its sturdy construction withstands regular, rigorous use, while boosting engine efficiency and longevity. Maintain engine health with ease and integrity.
- Widely Applicable: Not only a vessel for your oil mixtures, this bottle serves as an indispensable accessory for gardening tools, enhancing the performance of chain saws and lawn mowers with its multifunctional use.
- Prevent Spills and Waste: Achieve precise mixing ratios effortlessly with this Oil Mixing Bottle. The specially designed nozzle and filling point prevent spills and waste, making pouring and separation a breeze. Optimize engine performance with ease.
- Efficient Mixing: Designed with a 1.5L capacity and clear scale markings, mixing oil and has never been easier. Always get the perfect mix ratio for optimal engine performance.
- Durability ABS Material: The Oil Mixing Bottle is made of sturdy ABS material that ensures long-lasting performance. Its design ensures impact and wear resistant, making it a choice for daily use.
- See more on Amazon...
Brand: Annewi | Manufacturer: Annewi
See On Amazon #27
Bucket With Lid, Translucent High Density Graduated Measuring Container, 1.5l Measuring Oil Container, Oil Container Automotive for Chain Saw Brush Cutter, Trimmer
Asin: B0D3HC1TL7 | Ean: 0782364112727 | UPC: 782364112727
Prevent Spills And Waste: Achieve Precise Mixing Ratios Effortlessly With This Oil Mixing Bottle. The Specially Designed Nozzle And Filling Point Prevent Spills And Waste, Making Pouring And Separation A Breeze. Optimize Engine Performance With Ease..
Operate With Ease: Promote Your Vehicle's Performance With The Simple-To-Use Oil Mixing Bottle. Its Sturdy Construction Withstands Regular, Rigorous Use, While Boosting Engine Efficiency And Longevity. Maintain Engine Health With Ease And Integrity..
Widely Applicable: Not Only A Vessel For Your Oil Mixtures, This Bottle Serves As An Indispensable Accessory For Gardening Tools, Enhancing The Performance Of Chain Saws And Lawn Mowers With Its Multifunctional Use..
Efficient Mixing: Designed With A 1.5L Capacity And Clear Scale Markings, Mixing Oil And Has Never Been Easier. Always Get The Perfect Mix Ratio For Optimal Engine Performance..
Features
- Durability ABS Material: The Oil Mixing Bottle is made of sturdy ABS material that ensures long-lasting performance. Its design ensures impact and wear resistant, making it a choice for daily use.
- Efficient Mixing: Designed with a 1.5L capacity and clear scale markings, mixing oil and has never been easier. Always get the perfect mix ratio for optimal engine performance.
- Prevent Spills and Waste: Achieve precise mixing ratios effortlessly with this Oil Mixing Bottle. The specially designed nozzle and filling point prevent spills and waste, making pouring and separation a breeze. Optimize engine performance with ease.
- Widely Applicable: Not only a vessel for your oil mixtures, this bottle serves as an indispensable accessory for gardening tools, enhancing the performance of chain saws and lawn mowers with its multifunctional use.
- Operate with Ease: Promote your vehicle's performance with the simple-to-use Oil Mixing Bottle. Its sturdy construction withstands regular, rigorous use, while boosting engine efficiency and longevity. Maintain engine health with ease and integrity.
- See more on Amazon...
Brand: awakentti | Manufacturer: awakentti
See On Amazon #28
Motorcycle Fuel Tank Cap, Oil Tank Cover, Fancy Appearance, Easy to Clean, WearResistant for Touring (Black)
Asin: B0CP2RV5QC | Model: LJCMcvgauqbmz1-11 | PartNumber: LJCMcvgauqbmz1-11 | Ean: 7807236362390
Applicable Model: Exterior Door Handle Is Replacement For Touring, Please Check Whether Your Model Is Applicable Before Buying..
Easy To Clean And Maintain: The Appearance Of The Tank Cover Is Easy To Clean, By Using Special Cleaning Products Can Keep Bright As New, But Also To Protect The Surface Of The Tank Cover..
With Fancy Appearance: Motorcycle Oil Tank Cover Appearance Fashion, Novel, A Variety Of Colors And Styles For Choice, Make The Motorcycle More Beautiful And Generous..
Suitable For Most Models: The Oil Tank Cap Is Suitable For Most Motorcycle Models, Easy To Install..
Features
- Durable and Suitable for Various Environments:Motorcycle tank cap is made of steel and aluminum, which have extremely strong durability and can withstand the test of harsh road conditions and weather environments.
- Suitable for Most Models: The oil tank cap is suitable for most motorcycle models, easy to install.
- Applicable Model: Exterior door handle is replacement for touring, please check whether your model is applicable before buying.
- With Fancy Appearance: Motorcycle oil tank cover appearance fashion, novel, a variety of colors and styles for choice, make the motorcycle more beautiful and generous.
- Easy to Clean and Maintain: The appearance of the tank cover is easy to clean, by using special cleaning products can keep bright as new, but also to protect the surface of the tank cover.
- See more on Amazon...
Brand: RTLR | Manufacturer: RTLR
See On Amazon #29
RotopaX 1.75 Gallon Water Pax
Asin: B012PEBNOK | Model: rx-1.75w | PartNumber: rx-1.75w | Ean: 6641053007109, 0779422680021 | UPC: 779422680021
Availible: Rotopax Are The Only Rotationally Molded Epa And Carb Compliant Containers Available For Sale In The United States..
To Add More Containers To An Existing Kit, Add A Pack Mount Extension To Your Container Order.
Durable: Roto-Molded With Thicker Walls And Stronger Construction Make It Leak-Proof Along With A Sure Seal Gasket To Guarantee Your Spout Wont Leak Or Vibrate Loose..
Features
- SPECIALTY: All the containers Rotopax manufactures for the United States are molded using a patented three-layer Roto-Molding process,along with specialty formulated plastic barrier material to meet the governments new extremely low permeability requirements.
- DURABLE: Roto-molded with thicker walls and stronger construction make it leak-proof along with a sure seal gasket to guarantee your spout wont leak or vibrate loose.
- AVAILIBLE: Rotopax are the only rotationally molded EPA and CARB compliant containers available for sale in the United States.
- To add more containers to an existing kit, add a Pack Mount Extension to your Container order
- See more on Amazon...
Brand: RotopaX | Manufacturer: RotopaX
Dimensions: 3.50 x 15.00 x 13.50 Inches | Weight: 2.96 Pounds
See On Amazon #30
ARP 150-6901 Oil Pump Bolt Kit For Select Ford Applications, 3/8" And 5/16" 4 Piece Kit, 12-Point Style
Asin: B000CFO15I | Model: 150-6901 | PartNumber: 150-6901 | Ean: 0672036003296 | UPC: 672036003296
Rated At 170,000 Psi, Which Is Considerably Stronger Than Grade 8 Hardware.
Heads Are Compact 12-Point Style.
Kit Comes Complete With Bolts And Washers.
Manufactured From Black Oxide Finished Chrome Moly Steel.
Features
- Premium grade oil pump bolts are inexpensive "insurance" that could save your engine
- Manufactured from black oxide finished chrome moly steel
- Rated at 170,000 PSI, which is considerably stronger than Grade 8 hardware
- Kit comes complete with bolts and washers
- Heads are compact 12-point style
- See more on Amazon...
First Available: 06/05/2012
Brand: ARP | Manufacturer: ARP
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.05 Pounds
Warranty: Manufacturer warranty
See On Amazon
Looking For Something Else?
Search