Best automotive switches - Buying Guide
Last Updated: 05/09/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
DaierTek ON Off Round Rocker Switches SPST 20mm Mini 12 Volt DC Mini Circle Toggle Switch 12V for Car Automotive RV 2 Pin Switch 120V Wired KCD1-5Pack
Asin: B07S1MV462 | Model: KCD1-5-101 | PartNumber: KCD1-5-101 | Ean: 0016071636116 | UPC: 016071636116
Function: The On/Off Rocker Switch Is 2 Pin Spst Design (Single Pole Single Throw) On Off. The Rating Is 10A 120V Ac And 20A 12V Dc..
Application: The Circle Round Rocker Toggle Switch Is Widely Applied To Car Automotive Rv Household Appliances, Etc..
Installation: The Mounting Hole Size Of This Mini 12 Volt Rocker Switch Is 0.787 Inches (20Mm). It Adopts Snap-In Design, Easy To Install..
Material: The Kcd1 Small Round Rocker Switch Is Made Of Nylon Pa66. The Terminals Are Made Of Brass With Silver Plated..
Features
- Features: "O I" marked on black button 12V Rocker Switch with 5 sets of wires(#187 Lock Terminals on end) for switch easy connection.
- Material: The KCD1 Small round rocker switch is made of nylon PA66. The terminals are made of brass with silver plated.
- Function: The ON/OFF rocker switch is 2 pin SPST design (single pole single throw) ON OFF. The rating is 10A 120V AC and 20A 12V DC.
- Installation: The mounting hole size of this Mini 12 Volt rocker switch is 0.787 inches (20mm). It adopts snap-in design, easy to install.
- Application: The Circle round rocker toggle switch is widely applied to Car Automotive RV Household appliances, etc.
- See more on Amazon...
Brand: DAIERTEK | Manufacturer: DaierTek
Dimensions: 1.00 x 0.91 x 0.91 Inches | Weight: 0.01 Pounds
See On Amazon #2
RED WOLF 60Amp Circuit Breaker for Boat Trolling Motor Marine ATV Trailer Vehicles Stereo Audio Electronic Battery Solar System Inline Fuse with Manual Reset Switch Waterproof DC 12V-48V
Asin: B08LYG7ZYF | Ean: 0769894718285 | UPC: 769894718285
Manual Reset: Unique On/ Off Reset Push Button, Mounted On Panel Or Firewall, Can Used As A Kill Switch. No Need To Buy More Replacing Fuses..
Use The Waterproof Cover To Better Prevent Rust From Metal Parts. Max Current 60A; Voltage Dc 24V..
Application: Used In Auxiliary And Accessory Circuits For Fit To Boat Marine Rv Yacht Battery Trailer Bus Truck Atv Winches Applications. Also Used In Battery Charges And Dc Sound Amplifier System..
Solid Breaker: New Design With Waterproof Resistant Housing And Solid Build. Fuse Breaker Holders Have Pass Professional Electrical Performance Test And Aging Test, The Switch Button Is On/Off Smoothly, Reliable Quality..
Features
- Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage.
- Solid breaker: new design with waterproof resistant housing and solid build. Fuse breaker Holders have Pass professional electrical performance test and aging test, the switch button is on/off smoothly, reliable quality.
- Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
- Application: used in auxiliary and accessory circuits for fit to Boat Marine RV Yacht Battery Trailer Bus Truck ATV Winches applications. Also used in battery charges and DC sound amplifier system.
- Use the waterproof cover to better prevent rust from metal parts. Max current 60A; Voltage DC 24V.
- See more on Amazon...
Brand: RED WOLF | Manufacturer: RED WOLF
Dimensions: 0.75 x 3.90 x 2.70 inches
See On Amazon #3
LivTee 2 PCS Crystal Double Rhinestone Car Engine Start Stop Decoration Ring, Bling Car Interior Accessories for Women, Push to Start Button Cover/Sticker, Key Ignition & Knob Bling Ring, White
Asin: B094XWPV2S
【Easy Installation】Each Crystal Ring Has A Piece Of Tape, You Just Need To Peel Off One Side Of The Tape And Stick Its Side To The Halo, Then Peel Off The Other Side Of The Tape And Stick It Tightly On The Button. (In Order To Make The Adhesive Stickier, Especially In Winter, The Adhesive Will Be Weak, You Can Heat The Adhesive 5 Seconds With A Hair Dryer Before Sticking.).
【Attention】This Car Ignition Ring Sticker May Not Be Suitable For Some Special Car Models, Please Double Check The Diameter Of Your Car's Engine Ignition Button Before Purchasing.If You Have Any Questions About The Product, Please Contact Our Team In Time, We Will Give You The Best Solution..
【Application】These Rhinestone Ring Decors Accessories Can Be Used For Car Engine Start/Stop Push Buttons, Car A/C Knobs, Radio Switches, Stick Shift Etc..
【Universal Size】This Rhinestone Car Decoration Accessories Diameter Is 1.53 Inch; Inner Diameter Of The Ring Is 1.2 Inch; Thickness Is 0.115 Inch.Fits Most Cars, Suvs, Mtvs With Ignition Start Button..
Features
- High quality Push to start button decoration ring made of high quality zinc alloy, which is sturdy and durable, and with Double ring crystals on it, making the product dazzling and beautiful for Car Glam Interior Accessories and Unique Women Gift.
- Universal Size This rhinestone car decoration accessories diameter is 1.53 inch; inner diameter of the ring is 1.2 inch; thickness is 0.115 inch.Fits most cars, SUVs, MTVs with ignition start button.
- Easy installation Each crystal ring has a piece of tape, you just need to peel off one side of the tape and stick its side to the halo, then peel off the other side of the tape and stick it tightly on the button. (In order to make the adhesive stickier, especially in winter, the adhesive will be weak, you can heat the adhesive 5 seconds with a hair dryer before sticking.)
- Application These rhinestone ring decors accessories can be used for car engine start/stop push buttons, car a/c knobs, radio switches, stick shift etc.
- Attention This car ignition ring sticker may not be suitable for some special car models, please double check the diameter of your car's engine ignition button before purchasing.If you have any questions about the product, please contact our team in time, we will give you the best solution.
- See more on Amazon...
Brand: LivTee | Manufacturer: LivTee
See On Amazon #4
Nilight - 90015A Battery Switch 12-48V Waterproof Heavy Duty Battery Power Cut Master Switch Disconnect Isolator for Car Vehicle RV and Marine Boat (On/Off),2 Years Warranty
Asin: B07T288VN8 | Model: 90015A | PartNumber: 90015A | Ean: 0812227031862 | UPC: 812227031862
Compatible: Used For Dc 12 - 48V Systems To Isolate And Secure The Electrical System, Can Stand Alone Or Be Locked Together With Other Switch.Its Purpose Is To Eliminate Any Power Draw From The Battery When Vehicle Or Boat Is Not In Use, Disconnects The Battery Safely..
Package Include:1X On/Off Battery Switch,4 Bolts Incuded..
Widely Used For Car, Marine Boat, Rv, Camper, Travel Trailer, Truck, Atv, Utv, Battery Banks And Other Devices..
Operation: On/Off 2 Positions, 275 A Continuous At Dc 12V, 455 A Intermittent At Dc 12V, 1250 A Momentary At Dc 12V..
Features
- Heavy Duty: ABS plastic housing, durable made for safety use, rear cover insulates terminals against any short of circuits, equipped with 4 sets of bolts.
- Operation: On/Off 2 positions, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V.
- Compatible: used for DC 12 - 48V systems to isolate and secure the electrical system, can stand alone or be locked together with other switch.Its purpose is to eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely.
- Widely used for car, marine boat, RV, camper, travel trailer, truck, ATV, UTV, battery banks and other devices.
- Package include:1x On/Off battery switch,4 bolts incuded.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 2.83 x 3.86 x 2.87 inches | Weight: 0.10 pounds
Warranty: 2 Years Warranty
See On Amazon #5
Joinfworld Toggle Switch 12V DC 125V SPST 2 Pin Waterproof Marine Toggle Switch 12 Volt On Off Toggle Switch 30A Heavy Duty with Boot Cover for Automotive Boat Car Truck - 4Pack
Asin: B09SCXKKY2 | Model: WPC-06+KN3C-101 | PartNumber: WPC-06+KN3C-101 | Ean: 0717664070507 | UPC: 717664070507
Mounting Hole Size: The Mounting Hole Size Of This 12 Volt On Off Toggle Switch Is 1/2" (12Mm)..
Waterproof: The Marine Toggle Rocker Switch Can Reach Ip65 Waterproof Rating After Installing The Rubber Boot Cover, Suitable For Automotive, Car, Truck, Boat, Yacht, Diy Projects, Household Appliances, Etc..
Feature: This 12V Toggle Switch Comes With Screw Terminal. There Is A Gap On This 2 Position Toggle Switch To Fix The On/Off Plate And Prevent The Plate From Spinning On The Switch. In Addition, For Becoming Waterproof Toggle Switch 12V Marine, This 2 Way Switch Will Come With A Toggle Switch Cover..
Rating: 30A 12V Dc; 15A 24V Dc; 20A 125V Ac; 15A 250V Ac, Heavy Duty Marine Toggle Switch 12V Design..
Features
- ON OFF Toggle Switch: This is an SPST toggle switch, 2 pin switch, 2 position design. When turn the automotive toggle switch ON, it will stay at ON position until manually switch it off.
- Rating: 30A 12V DC; 15A 24V DC; 20A 125V AC; 15A 250V AC, heavy duty marine toggle switch 12v design.
- Mounting Hole Size: The mounting hole size of this 12 volt on off toggle switch is 1/2 (12mm).
- Feature: This 12v toggle switch comes with screw terminal. There is a gap on this 2 position toggle switch to fix the ON/OFF plate and prevent the plate from spinning on the switch. In addition, for becoming waterproof toggle switch 12v marine, this 2 way switch will come with a toggle switch cover.
- Waterproof: The marine toggle rocker switch can reach IP65 waterproof rating after installing the rubber boot cover, suitable for automotive, car, truck, boat, yacht, DIY projects, household appliances, etc.
- See more on Amazon...
Brand: Joinfworld | Manufacturer: Joinfworld
See On Amazon #6
42 Heavy Equipment Keys Master Set, Construction Ignition Key for Cat Caterpillar Case JD John Deere Hyster Komatsu Kubota Yanmar Daewoo Takeuchi Ford New Holland Volvo JCB and More
Asin: B0BMK4Z658 | Model: STKD-AUTO-35 | PartNumber: STKD-AUTO-35
【Premium Equipment Keys】Heavy Equipment Keys Master Set Is Made Of High-Quality Materials, Which Are Very Durable And Corrosion Resistant. Perfectly Help You Solve Problems And Help You Manage Your Heavy Equipment..
【Efficient】Whether You Are A Construction Professional Or A Maintenance Technician, This Key Set Will Be One Of Your Essential Tools. It Can Help You Easily Cope With Various Emergencies And Improve Your Work Efficiency..
【Note】Some Of The Keys Have No Identifying Marks, If You Can Not Identify All Keys, You Can Refer To The Detailed Description Or The Key Application On Product Images. There Are Two Keys That Cannot Be Threaded Through With Wire Rings. But It Can Be Threaded On The Wire Ring With The Help Of 2 Small Key Rings. And 2 Wire Ring Can Connect With Each Other If You Want To Thread Them All Together..
【Compatibility】Heavy Equipment Keys Are Compatible With Cat Caterpillar Case Jd John Deere Hyster Komatsu Kubota Yanmar Daewoo Takeuchi Ford New Holland Volvo Jcb Hamm And More Heavy Equipments..
Features
- Heavy Equipment Keys 42PCS heavy equipment keys master set construction ignition key operator keys fit for loaders, tractors, dump trucks, backhoes, excavators, bulldozers and many more heavy equipment.
- Compatibility Heavy equipment keys are compatible with Cat Caterpillar Case JD John Deere Hyster Komatsu Kubota Yanmar Daewoo Takeuchi Ford New Holland Volvo JCB Hamm and more heavy equipments.
- Premium Equipment Keys Heavy equipment keys master set is made of high-quality materials, which are very durable and corrosion resistant. Perfectly help you solve problems and help you manage your heavy equipment.
- Note Some of the keys have no identifying marks, if you can not identify all keys, you can refer to the detailed description or the key application on product images. There are two keys that cannot be threaded through with wire rings. But it can be threaded on the wire ring with the help of 2 small key rings. And 2 wire ring can connect with each other if you want to thread them all together.
- Efficient Whether you are a construction professional or a maintenance technician, this key set will be one of your essential tools. It can help you easily cope with various emergencies and improve your work efficiency.
- See more on Amazon...
Brand: Tecreddy | Manufacturer: Tecreddy
See On Amazon #7
Twidec/5Pcs 12V Round Rocker Switch AC 6A/250V 10A/125V SPST 2 Pin 2 Position On/Off Toggle Switch for Car Boat Automotive RV Black with Wires KCD1-5-101-ON-OFF-CX
Asin: B0B67GX6CT | Model: KCD1-5-101-ON-OFF-CX-5pcs | PartNumber: KCD1-5-101-ON-OFF-CX-5pcs
Product Poles : Spst; Terminals : 2 Pins; Position:2 Position On-Off；( This Switch Can Use 12V ) Wire Length: 200Mm/ 7.7".
This Truck Rocker Switch Control Uses Copper-Plated Silver Contacts, Has Good Electrical Conductivity, And Uses High-Quality Materials And Flame-Retardant Casing For High Safety,Note: Please Power Off Before Installation.
Rated Voltage And Current : Ac 125V, 10A; Ac 250V, 6A； Mounting Diameter: 20Mm/0.8"; Total Size: 23 X 28Mm/0.91" X 1.1"(Max.D*H).
Product Features: This Switch Has The Font "On Off", Which Makes It Easier To Identify The Switch State At That Time.Mechanical Life: More Than 80，000 Cycles. Electrical Life: More Than 10, 000 Cycles.
Features
- Product name: Rocker Switch; Package Content: 6Pcs Rocker Switches+12Pcs Wires.And it comes with a keyhole slot to prevent unwanted rotation Wired design:Easy to install, and saves unnecessary cost.
- Product features: This switch has the font ON OFF, which makes it easier to identify the switch state at that time.Mechanical life: more than 80 000 cycles. Electrical life: more than 10, 000 cycles
- Product Poles : SPST; Terminals : 2 Pins; Position:2 Position ON-OFF ( This switch can use 12V ) Wire length: 200mm/ 7.7
- Rated Voltage and Current : AC 125V, 10A; AC 250V, 6A Mounting Diameter: 20mm/0.8; Total Size: 23 x 28mm/0.91 x 1.1(Max.D*H)
- This truck rocker switch control uses copper-plated silver contacts, has good electrical conductivity, and uses high-quality materials and flame-retardant casing for high safety,NOTE: PLEASE POWER OFF before installation
- See more on Amazon...
Brand: Twidec | Manufacturer: Twidec
See On Amazon #8
DaierTek Waterproof Toggle Switch 12V DC 30A Heavy Duty 2 Pin ON Off SPST with Weatherproof Boot Cap Cover for Auto Car Marine Boat -2 Pack
Asin: B07T6XWZKN | Ean: 0016071636499 | UPC: 016071636499
Installation: Mounting Hole Size Is 0.48 Inches (12.2Mm). Each Of The Terminals Has A Machine Screw For Quick Connections, The Thickness Of Terminals Is 0.8Mm..
Application: Waterproof Toggle Switch Is Widely Applied To Various Additional Electric Equipment Inside And Outside Automotive Car Marine Boat, Such As Lights, Chassis Lamp, Fog Lamps, Dome Light, Etc..
Mechanical Life: More Than 100,000 Cycles. Electrical Life: More Than 10,000 Cycles..
Function: Waterproof Toggle Switch With 2 Pin Spst Design (Single Pole Single Throw), Easy To Turn On Off. The Rating Of This Heavy Duty Toggle Switch Is 30A 12Vdc; 15A 250Vac; 20A 125Vac..
Features
- Feature: The waterproof toggle switch is made of metal and bakelite. The shaft and bracket are both made of Brass Material. Switch with M12X0.75 weatherproof Boot Cap Cover, can effectively protect the switch. Delicate appearance with strong Construction. Look chic and high-end on your equipment.
- Function: Waterproof toggle switch with 2 pin SPST design (single pole single throw), easy to turn ON OFF. The rating of this heavy duty toggle switch is 30A 12VDC; 15A 250VAC; 20A 125VAC.
- Installation: Mounting hole size is 0.48 inches (12.2MM). Each of the terminals has a machine screw for quick connections, The thickness of Terminals is 0.8mm.
- Mechanical life: more than 100,000 cycles. Electrical life: more than 10,000 cycles.
- Application: Waterproof toggle switch is widely applied to various additional electric equipment inside and outside Automotive Car Marine Boat, such as lights, chassis lamp, fog lamps, dome light, etc.
- See more on Amazon...
Brand: DAIERTEK | Manufacturer: DaierTek
Dimensions: 2.18 x 1.16 x 0.63 Inches | Weight: 0.06 Pounds
See On Amazon #9
Nilight 5PCS LED Lighted Rocker Switch 12V Blue LED Illuminated ON Off Toggle Switch 30A 3Pin SPST Oval Shaped Switch 12mm Hole for Automotive Car Truck RV Motorcycles Marine Boats, 2 Years Warranty
Asin: B0BMQLH9CZ | Ean: 0840323901635 | UPC: 840323901635
Widely Used: The 12V Rocker Switch Mainly Be Used In Car, Atv, Utv, Suv, Wrangler, Rv, Off Road Vehicle, Truck, Boat, Yacht & Electronics Modification, Etc. Available For Upgrading Most Wiring Harnesses To Control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights & Auxiliary Lamps, Etc.
Package Includes: 5 X Blue Rocker Toggle Led Switches. 2 Year Warranty By Nilight..
Easy Installation: Mounting Hole Size: 0.43‘’(11Mm).Rocker On-Off Switch Is Easy To Install, Which Is Just Direct Setup, And No Additional Work Required, Our Switch Comes With A Keyhole Slot To Prevent Unwanted Rotation.
Perfect Design: Designed To Connect And Disconnect A Dc 12V 30A Electrical Circuit At Will, Spst:(Single Pole Single Throw), On-Off Control; 2 Pole Design (On/Off), 3Rd Poles With Led To Be Connected To Earth. Led On The Switch Will Illuminate When The Switch Is Turned On..
Features
- Features: This truck rocker switch control uses copper-plated silver contacts, has good electrical conductivity, and uses high-quality materials and flame-retardant casing for high safety. Equipped with output short circuit, overload & polarity reverse protection. Up to 10000 times of ON/OFF operating life span
- Perfect Design: Designed to connect and disconnect a DC 12V 30A electrical circuit at will, SPST:(single pole single throw), ON-OFF control; 2 pole design (On/Off), 3rd poles with LED to be connected to earth. LED on the switch will illuminate when the switch is turned on.
- Widely Used: The 12v rocker switch mainly be used in car, ATV, UTV, SUV, wrangler, RV, off road vehicle, truck, boat, yacht & electronics modification, etc. Available for upgrading most wiring harnesses to control LED light bar, LED work lights, fog lamps, headlights, taillights & auxiliary lamps, etc
- Easy Installation: Mounting Hole Size: 0.43 (11mm).Rocker On-off switch is easy to install, which is just direct setup, and no additional work required, our switch comes with a keyhole slot to prevent unwanted rotation
- Package Includes: 5 x Blue Rocker Toggle LED Switches. 2 Year Warranty by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 0.39 x 0.39 x 0.39 Inches
Warranty: 2 Years Warranty
See On Amazon #10
Nilight Waterproof Rocker Switch Toggle ON Off ON Switch DPDT 7Pin 12V 24V Switch Jumper Wires Winch Pump Switch for Cars Trucks Caravans Boats RV SUV ATV UTV,2 Years Warranty
Asin: B0BJ2GY2FP | Model: 90250B-A | PartNumber: 90250B-A | Ean: 0840323901529 | UPC: 840323901529
Sturdy And Durable: Made Of High-Quality Plastic And Well-Conductive Pins; Ensure Long Lasting Durability, Highly Optimized For General Use And Will Give You A Pleasant Experience..
Package Includes: A 7 Pin Switch, Jumper Wires Set And A Wiring Diagram. 2 Year Warranty By Nilight..
Multiple Security Protection: Output Circuit Protection, Overload Protection, Reverse Polarity Protection. Built In Two Premium Leds, The Highly Luminous Led Allows For Clear Visibility At Night, Safer And More Convenient To Use..
Wide Applications: Universal Fit For All Cars, Rvs, Suvs, Atvs, Utvs, Cans, Buses, Marine Boats, Yachts, Trailers, Jeeps, Prerunners, Campers, Caravans Etc; Mainly Used To Control The High Low Beam Of The Headlights, Taillights And Auxiliary Lamps, Etc..
Features
- Easy to install and use: 7 pin on off on rocker switch with DPDT design (double pole double Throw), rated at 20AMP/12VDC and 10AMP/24VDC. Can be installed or replaced on the original rocker switch panels. It is easy and simple to set up. Can control 2 loads.
- Wide Applications: Universal fit for all cars, RVs, SUVs, ATVs, UTVs, Cans, Buses, Marine boats, Yachts, Trailers, Jeeps, Prerunners, Campers, Caravans etc; Mainly used to control the high low beam of the headlights, taillights and auxiliary lamps, etc.
- Sturdy and durable: made of high-quality plastic and well-conductive pins; ensure long lasting durability, highly optimized for general use and will give you a pleasant experience.
- Multiple Security Protection: Output circuit protection, overload protection, reverse polarity protection. Built in two premium LEDs, the highly luminous LED allows for clear visibility at night, Safer and more convenient to use.
- Package Includes: A 7 PIN switch, jumper wires set and a wiring diagram. 2 Year Warranty by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 1.97 x 1.97 x 1.97 Inches
Warranty: 2 Years Warranty
See On Amazon #11
42 Heavy Construction Equipment Machine Operator Ignition Master Keys Set Fits Caterpillar Bobcat JD Case JLG JCB Volvo Hyster Ford New Holland Yanmar Takeuchi Kubota Komatsu Toyota Hitachi
Asin: B0BQ2BX4ZT | Model: WY-42KS | PartNumber: WY-42KS
【High Quality Equipment Keys】We Are Committed To Manufacturing A Variety Of High Quality Equipment Keys, We Use High Quality Materials And Are Specially Manufactured To Oem Standards, Precisely Cut To Code!.
【Best Services】Master Key Set For Construction Workers, Contractors And Heavy Equipment Operators. After Receiving The Key, If You Have Any Questions You Can Contact Us At The First Time, We Will Patiently Give You The Best Answer!.
【Easy To Carry】We Included A Wire Ring That Is Very Strong And Durable! Easily Add Or Remove Keys With The Key Ring, Light Weight And Easy To Customize With Your Various Heavy Equipment Key Master Sets!.
【Application】Our Heavy Construction Equipment Keys For Backhoes, Loaders, Excavators, Tractors, Dump Trucks, Bulldozers And More Are An Excellent Choice For You!.
Features
- PREMIUM EQUIPMENT KEYS SET 42 Premium Heavy Equipment Keys for Excavators, Forklifts, Backhoes, Graders, Lifts, Skid Steers, Rollers, Lawn Mowers, Tractors, Dozers, Loaders and more by Caterpillar, Kubota, JD, Komatsu, Bobocat, Ford, Case, JCB, Volvo, Daewoo and Many More.
- APPLICATION Our heavy construction equipment keys for backhoes, loaders, excavators, tractors, dump trucks, bulldozers and more are an excellent choice for you!
- HIGH QUALITY EQUIPMENT KEYS We are committed to manufacturing a variety of high quality equipment keys, we use high quality materials and are specially manufactured to OEM standards, precisely cut to code!
- EASY TO CARRY We included a wire ring that is very strong and durable! Easily add or remove keys with the key ring, light weight and easy to customize with your various heavy equipment key master sets!
- BEST SERVICES Master key set for construction workers, contractors and heavy equipment operators. After receiving the key, if you have any questions you can contact us at the first time, we will patiently give you the best answer!
- See more on Amazon...
Brand: WAH YUE HING | Manufacturer: WAH YUE HING
Weight: 1.00 Pounds
See On Amazon #12
COROTC Toggle Switch, 8 Pack SPST 2 Pin Waterproof Toggle Witch 12V 20A, Heavy Duty ON Off Switch for Boat, Yacht, Vessels...
Asin: B07WW3WW3F
【Easy To Use】 - Simply Put The Rubber Cap Into The Handle, Turn Clockwise, All Done. 2 Pole On Off Switch, Red Positive, The Standard "Hot" Wire, Black Is Negative. Toggle Switch 12V Perfect For A Boat, Yacht, Vessels And Other Marine..
【Sincere Service】- Professional Toggle Switch Manufacturer. If You Are Not Completely Satisfied With Your Order, Please Contact Us, We Provides 3 Years Warranty..
【Great Value Switches】 - Waterproof Toggle Switch Made From Sturdy Material That Ensures Superior Durability,The Mechanical Life Of The Toggle Switch Exceeds 50,000 Cycles Under Normal Use..
【Waterproof Boot Cap】 -12V Toggle Switch Included Bonus Weather Resistant Rubber Cap, No Worry About Moisture And Dust Entering In..
Features
- SPST 2 Pin ON/OFF Switch - You can toggle the handle manually to ON or OFF position, Toggle switch operation is very flexible.
- Waterproof Boot Cap -12v toggle switch included bonus weather resistant rubber cap, no worry about moisture and dust entering in.
- Easy to Use - Simply put the rubber cap into the handle, turn clockwise, all done. 2 pole on off switch, red positive, the standard hot wire, black is negative. Toggle switch 12v perfect for a boat, yacht, vessels and other marine.
- Great Value Switches - Waterproof toggle switch made from sturdy material that ensures superior durability,The mechanical life of the toggle switch exceeds 50,000 cycles under normal use.
- Sincere Service - Professional Toggle Switch Manufacturer. If you are not completely satisfied with your order, Please contact us, We Provides 3 years warranty.
- See more on Amazon...
Brand: COROTC | Manufacturer: COROTC
Dimensions: 0.70 x 4.00 x 2.00 Inches
See On Amazon #13
Nilight 6PCS 5PIN SPST Rocker Switches with 6 Sets Jumper Wires Set 20A/12V 10A/24V On/Off Toggle Switches with Night Glow Sticker for Trucks Boats Auto Motorcycles,2 Years Warranty (90131F) , Blue
Asin: B08P5PJT8C | Model: 90131F | PartNumber: 90131F | Ean: 0727196414045 | UPC: 727196414045
Wide Application: Standard 5 Pin Switch, Rated At 20Amp/12Vdc And 10Amp/24Vdc, Available For Upgrading Most Wiring Harness To Control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights And Auxiliary Lamps, Etc..
Package Include: 6Pcs Rocker Switches, 6 Sets Of Jumper Wires, 2 Pieces Of Diy Stickers. 2 Year Warranty.
Diy Stickers: Products Also Shipped With 1 Pcs Of Diy Sticker And 1 Pcs Of Night Glow Sticker With Various Patterns, Can Be Diy Used To Control Any Vehicle Electrical Appliance For Your Specific Needs..
Idea Replacements: 5 Pin On-Off Rocker Switch With Spst Design (Single Pole Single Throw), Simple Installation, Freely Turn On Or Off The Light. The Switches Can Be Replaced With Any Defective 5 Pin Spst Switches..
Features
- sturdy and durable: made of high-quality plastic and well-conductive pins; ensure long lasting durability,highly optimized for general use and will give you a pleasant experience.
- idea replacements: 5 pin on-off rocker switch with spst design (single pole single throw), simple installation, freely turn on or off the light. the switches can be replaced with any defective 5 pin spst switches.
- wide application: standard 5 pin switch, rated at 20amp/12vdc and 10amp/24vdc, available for upgrading most wiring harness to control led light bar, led work lights, fog lamps, headlights, taillights and auxiliary lamps, etc.
- diy stickers: products also shipped with 1 pcs of diy sticker and 1 pcs of night glow sticker with various patterns, can be diy used to control any vehicle electrical appliance for your specific needs.
- package include: 6pcs rocker switches, 6 sets of jumper wires, 2 pieces of diy stickers. 2 Year Warranty
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 1.00 x 5.00 x 2.00 Inches
Warranty: 2 Years Warranty
See On Amazon #14
Nilight - 90001B LED Light Bar Rocker Switch 5Pin Laser On/Off LED Light 20A/12V 10A/24V Switch Jumper Wires Set for Jeep Boat Trucks,2 Years Warranty,Blue
Asin: B06ZZJ3T6Q | Model: 90001B | PartNumber: 90001B | Ean: 0600537016354 | UPC: 600537016354
Sturdy And Durable: Made Of High-Quality Plastic And Well-Conductive Pins; Laser-Etched Pattern, Not Easy To Fade Away.
Package Included: 1X 5 Pin Rocker Switch, 1X Jumper Wires Set, 1X Diagrams. 2 Year Warranty By Nilight..
Wide Application: Standard 5 Pin Switch, Rated At 20Amp/12V And 10Amp/24V, Available For Upgrading Most Wiring Harness To Control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights And Auxiliary Lamps, Etc..
Cool Illuminated Light: Built-In Two Premium Leds Emits Soft Light To Illuminate The Patterns, Easy For You To Find The Switch In The Dark.
Features
- Easy to install and use: 5 pin on-off rocker switch with SPST design (single pole single Throw), simple installation, freely turn on or off the light
- Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark
- Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away
- WIDE APPLICATION: standard 5 Pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc.
- Package included: 1X 5 pin rocker switch, 1X jumper wires set, 1X diagrams. 2 Year Warranty by Nilight.
- See more on Amazon...
First Available: 05/09/2017
Brand: Nilight | Manufacturer: Nilight
Dimensions: 0.39 x 0.79 x 0.39 inches | Weight: 0.03 pounds
Warranty: 2 Years Warranty
See On Amazon #15
weideer 2Pcs Toggle Switch 12V 30A ON/Off 2 pin 2 Position SPST Waterproof Switch with Waterproof Cap Terminals for Auto Car Boat KL-C101
Asin: B09CTNM2B9 | Model: TEN-1021-GM | PartNumber: TEN-1021-GM
Product Size: Mounting Hole Diameter 12Mm /0.48Inches; The Overall Size Of The Switch Is 28.9Mmx15mmx53mm/1.1Inx0.59Inx2.1In. The Thickness Of The Terminal Block Is 0.9Mm..
Product Packaging: 2Pcs Toggle Switch + 2Pcs High-End Waterproof Cap + 4Pcs Brass Terminal Block.
Product Application: Toggle Switches Are Widely Used In Automobiles, Ships, Electrical Equipment, Household Equipment, Lighting, Medical Equipment, Industrial Machinery And Equipment, Etc..
Product Parameters: Mechanical Life: More Than 100,000 Cycles. Electrical Life: More Than 10,000 Cycles. Spst 2 Pin On/0Ff; Voltaget: 20A 125Vac; 15A 250V Ac, 12 Volt Dc 30A..
Features
- Product name: Waterproof Heavy Duty toggle switch and waterproof cap. (Axes, brackets and terminals are all made of brass), which can make your equipment more high-end and safer.
- Product parameters: Mechanical life: more than 100,000 cycles. Electrical life: more than 10,000 cycles. SPST 2 pin ON/0FF; Voltaget: 20A 125VAC; 15A 250V AC, 12 volt DC 30A.
- Product size: Mounting hole diameter 12MM /0.48inches; The overall size of the switch is 28.9mmx15mmx53mm/1.1inx0.59inx2.1in. The thickness of the terminal block is 0.9mm.
- Product application: Toggle switches are widely used in automobiles, ships, electrical equipment, household equipment, lighting, medical equipment, industrial machinery and equipment, etc.
- Product packaging: 2pcs toggle switch + 2pcs high-end waterproof cap + 4pcs brass terminal block
- See more on Amazon...
Brand: weideer | Manufacturer: weideer
See On Amazon #16
Ignition Switch with Key, 4 Position Universal Key Ignition Switch 12v for Car, Truck, Tractor, Trailer, Forklift, and More, Acc/Off/IGN/Start
Asin: B0BX7M42VK
【Premium Quality】The Ignition Switch Is Made Of High-Performance Abs And High-Quality Brass, With Safety, Durability And Excellent Conductivity..
【Package List】Package Includes 1* Ignition Switch, 2* Keys, 1 Pack Of Heat Shrinkable Sleeves. Pls Contact Us Freely If You Have Any Questions For Our Ignition Switch With Key..
【Easy To Install】Designed With A Screw Lock-Nut, Simply Connect Wires To The Appropriate Stud. Note: This Switch Does Not Need To Be Grounded. Your Loads Connected To The Switch Need To Be Grounded..
【4 Position Acc/Off/Ign/Start】4 Position Ignition Key Switch Controls 4 Functions, Acc/Off/Ign/Start. Come With A Pack Of Heat Shrinkable Sleeves, Easy To Connect Wires..
Features
- Ignition Switch with Key Universal Key Ignition Switch compatible with car, truck, tractor, trailer, forklift, and more equipment. Rated 30A at 12v DC.
- 4 Position Acc/Off/IGN/Start 4 Position Ignition Key Switch controls 4 functions, Acc/Off/IGN/Start. Come with a pack of heat shrinkable sleeves, easy to connect wires.
- Premium Quality The ignition switch is made of high-performance ABS and high-quality brass, with safety, durability and excellent conductivity.
- Easy to install Designed with a screw lock-nut, simply connect wires to the appropriate stud. Note: this switch does not need to be grounded. Your loads connected to the switch need to be grounded.
- Package List Package includes 1* ignition switch, 2* keys, 1 pack of heat shrinkable sleeves. pls contact us freely if you have any questions for our ignition switch with key.
- See more on Amazon...
Brand: Tecreddy | Manufacturer: Tecreddy
See On Amazon #17
JDMCAR Compatible with Toyota Tacoma 2005-2015 A/C Air Conditioning Control Switch Knob Button, HVAC Control Knob Tacoma Heater Temperature HVAC Fan Control Knob - (A Set of 3 Knobs)
Asin: B09J4JKKMP
▶Decoration - Add A New Interior Look To Your 2005-2015 Tacoma By Installing Jdmcar Hvac Control Knobs. This Kit Adds Style And Protection To Your 2Nd Gen Tacoma..
▶ The Reason You Choose Us - Ac Control Knobs Are Usually Damaged Or Cracked Over Time Due To Frequent Use Them. It Is Located In The Center Of The Dashboard Below The Radio Instrument And Can Be Easily Installed Without Any Tools. It Is A Simple Swap, Pull Off Your Old Knobs And Push On Our A/C Tacoma Knobs..
▶Ultra Durability - Made Of Premium Aluminum Alloy And Plastic Material, Meticulously Surface And Eye-Catcher..
▶Easy Installation - Installation Video Available. Please Check Our Listing Carefully.Installation Tip: Just Pull Off The Old Ones And Push On The New Ones. Looks Much Better Than Plastic Factory Knobs After Installation. The Illumination That Can Be Seen Through These Knobs At Night Is An Added Benefit..
Features
- CHECK FIRST - A/C Air Conditioning Control Switch Knobs fit 2nd Gen Tacoma 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 ,including SR, SR5, TRD Sport, TRD Off-Road, Limited, TRD PRO.
- EASY INSTALLATION - Installation video available. Please check our listing carefully.Installation Tip: Just pull off the old ones and push on the new ones. Looks much better than plastic factory knobs after installation. The illumination that can be seen through these knobs at night is an added benefit.
- DECORATION - Add a new interior look to your 2005-2015 Tacoma by installing JDMCAR HVAC Control Knobs. This kit adds style and protection to your 2nd Gen Tacoma.
- ULTRA DURABILITY - Made of premium Aluminum alloy and plastic material, meticulously surface and eye-catcher.
- THE REASON YOU CHOOSE US - AC control knobs are usually damaged or cracked over time due to frequent use them. It is located in the center of the dashboard below the radio instrument and can be easily installed without any tools. It is a simple swap, pull off your old knobs and push on our A/C Tacoma knobs.
- See more on Amazon...
Brand: JDMCAR | Manufacturer: JDMCAR
Weight: 0.00 Pounds
See On Amazon #18
Nilight Down Up Polarity Reverse Switch DPDT 20A 7PIN Momentary Rocker Switch ON Off ON Switch 12V 24V Toggle Switch Jumper Wires for Control Motor for Hoist, Crane, Linear Actuator, 2 Years Warranty
Asin: B0BJ2C8TGC | Model: 90251B-A | PartNumber: 90251B-A | Ean: 0840323901574 | UPC: 840323901574
Wide Range Of Application: Universal Fit For All Cars, Rvs, Suvs, Atvs, Utvs, Cans, Buses, Marine Boats, Yachts, Trailers, Jeeps, Prerunners, Campers, Caravans Etc; Mainly Used To Control Winch, Pump, Horn, Reclining Media Room Seats, Auto Bilge Pump Or Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights And Auxiliary Lamps, Etc..
Package Includes: A 7 Pin Switch, Jumper Wires Set And A Wiring Diagram. 2 Year Warranty By Nilight..
Sturdy And Durable: Made Of High-Quality Plastic And Well-Conductive Pins; Ensure Long Lasting Durability, Highly Optimized For General Use And Will Give You A Pleasant Experience..
Dual Operation: This Momentary Electrical System Switch Is Used For Jogging Or Inching Operations. A Dpdt Switch Is Equivalent To Two Spdt Switches. It Routes Two Separate Circuits. Connecting Each Of Two Inputs To One Of Two Outputs. The Position Of The Switch Determines The Number Of Ways In Which Two Contact Can Be Routed. Always Make Sure You Are Using A Switch And Wire Sufficient To Handle The Load You Are Carrying. In Higher Draw Applications, A Relay May Be Needed..
Features
- Momentary Switch: Heavy duty DPDT reverse polarity switch resetting automatically (returns to off) when released. Controls the up/down, clockwise/counterclockwise motion of DC loads (e.g. motors, hoists, cranes, linear actuators etc.).
- Dual Operation: This momentary electrical system switch is used for jogging or inching operations. A DPDT switch is equivalent to two SPDT switches. It routes two separate circuits. Connecting each of two inputs to one of two outputs. The position of the switch determines the number of ways in which two contact can be routed. Always make sure you are using a switch and wire sufficient to handle the load you are carrying. In higher draw applications, a relay may be needed.
- Wide range of application: Universal fit for all cars, RVs, SUVs, ATVs, UTVs, Cans, Buses, Marine boats, Yachts, Trailers, Jeeps, Prerunners, Campers, Caravans etc; Mainly used to control Winch, Pump, Horn, Reclining Media Room Seats, Auto Bilge Pump or led light bar, led work lights, fog lamps, headlights, taillights and auxiliary lamps, etc.
- Sturdy and durable: made of high-quality plastic and well-conductive pins; ensure long lasting durability, highly optimized for general use and will give you a pleasant experience.
- Package Includes: A 7 PIN switch, jumper wires set and a wiring diagram. 2 Year Warranty by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 1.00 x 1.00 x 1.00 Inches
Warranty: 2 Years Warranty
See On Amazon #19
Heavy Equipment Keys Master Set, Construction Ignition Key Set Fits Case,Komatsu,Hyster, Cat, JCB, Daewoo, JLG, JD, Forklift, Crown, Volvo, Toyota. Great for Workers and Equipment Opeartors.
Asin: B0BJ67GT1P | Model: 24 Equipment Keys | PartNumber: 24 Equipment Keys
【Easy To Carry】Easily Add Or Remove Keys With The Key Ring, Light Weight And Easy To Customize With Your Various Heavy Equipment Key Master Sets!.
【Best Services】If You Can't Identify The Key, You Can Always Contact Us And We Have One-On-One Customer Service To Help You Solve The Problem Until You Are Satisfied!.
【Application】Our Heavy Construction Equipment Keys For Backhoes, Loaders, Excavators, Tractors, Dump Trucks, Bulldozers And More Are An Excellent Choice For You!.
【High Quality Equipment Keys】We Are Committed To Manufacturing A Variety Of High Quality Equipment Keys, We Use High Quality Materials And Are Specially Manufactured To Oem Standards, Precisely Cut To Code!.
Features
- PREMIUM EQUIPMENT KEYS SET 24 heavy equipment master keys,consrtuction ignition keys set fits CASE, D250, DAEWOO, FORKLIFT, JLG, CAT, HYSTER, JCB, NEW HOLLAND, JD, TAKEUCHI, JLG, YANMAR, TOYOTA, KOMASTU, SANY etc!
- HIGH QUALITY EQUIPMENT KEYS We are committed to manufacturing a variety of high quality equipment keys, we use high quality materials and are specially manufactured to OEM standards, precisely cut to code!
- EASY TO CARRY Easily add or remove keys with the key ring, light weight and easy to customize with your various heavy equipment key master sets!
- APPLICATION Our heavy construction equipment keys for backhoes, loaders, excavators, tractors, dump trucks, bulldozers and more are an excellent choice for you!
- BEST SERVICES If you can't identify the key, you can always contact us and we have one-on-one customer service to help you solve the problem until you are satisfied!
- See more on Amazon...
Brand: WAH YUE HING | Manufacturer: WAH YUE HING
See On Amazon #20
3Pcs AC Heater Blower Fan Control Knob Compatible with 2000 2001 2002 2003 2004 2005 2006 Toyota Tundra Climate Control Knob 55905-0C010
Asin: B0C8191WNS
【Convenient To Use】Set Of 3 Control Knob For Heater, Just Pull Off The Old Ones And Push On The New Ones, Looks Much Better Than Plastic Factory Knobs After Installation , Which Is Proper In Size And Light In Weight, Convenient For You To Carry Or Take, Bringing You A Pleasant Use Experience.
【A Wide Range Of Applications】The Air Conditioning Control Switch Knob Is Compatible With Toyota Tundra, Which Can Fit Well With The Car And Give You A Good Driving Experience,Please Rest Assured To Buy Our Products, I Hope You Have A Pleasant Shopping Experience.
【Function】Ac Control Knobs Usually Break Or Crack Over Time Due To Frequent Use, It Is A Common Replacement For Your, You Can Adjust The Heat In Your Truck Without Having To Freeze Again During The Winter..
【Interchange Part Nunber】This Air Conditioner Replacement Switch Replaces 55905-0C010 559050C010, Compatible With 2000 2001 2002 2003 2004 2005 2006 Toyota Tundra Control Knob..
Features
- High Quality Made from quality materials to ensure reliable performance and long service life which is higher stablity and reliability than the factory part.
- Interchange Part Nunber This Air Conditioner Replacement Switch replaces 55905-0C010 559050C010, compatible with 2000 2001 2002 2003 2004 2005 2006 Toyota Tundra control knob.
- Convenient to use Set of 3 Control Knob for Heater, Just pull off the old ones and push on the new ones, looks much better than plastic factory knobs after installation , which is proper in size and light in weight, convenient for you to carry or take, bringing you a pleasant use experience
- Function AC control knobs usually break or crack over time due to frequent use, It is a common replacement for your, you can adjust the heat in your truck without having to freeze again during the winter.
- A wide range of applications The air conditioning control switch knob is compatible with Toyota Tundra, which can fit well with the car and give you a good driving experience,Please rest assured to buy our products, I hope you have a pleasant shopping experience
- See more on Amazon...
Brand: CmeRto | Manufacturer: CmeRto
See On Amazon #21
RVMARINEPAT Heavy Duty Toggle Switch 12V DC 30A Waterproof Toggle Switch 2 Pin ON/Off SPST with Mounting Panel, Weatherproof Cap Cover for Auto Car Marine Boat
Asin: B0CPLLRR4Q
On Off Switch --- The On/Off Toggle Switch Is 2 Pin Spst Design, And The Rating Of This Automotive Switch Is 30A 12Vdc; 15A 250Vac; 20A 125Vac. These Spst Toggle Switches Operate Flexibly And Have A Long Service Life, Which Is A Good Purchase For You..
What You Get --- The Package Includes 1 X 12V Toggle Switch, 1 X Switch Mounting Panel, 1 X Waterproof Cap Cover, 2 X Metal Nuts, 1 X Metal Washer And 4 X Mounting Screws. Our On/Off Switches Are Quick To Install And Easy To Use, Please Feel Free To Contact Us If Confused..
Wide Application --- This Heavy Duty Toggle Switch Is Widely Applied To All Kinds Of Additional Electric Equipment That Inside And Outside Of The Automotive, Cars, Motorcycles, Trucks, Tractors, Rvs, Atvs, Marine, Boats, Ships, Etc. With This 12 Volt Switch, It Facilitates The Personalized Modification Of Your Vehicle..
Switch Mounting Plate --- The Car Toggle Switch Is Equipped With Mounting Panel, And Its Mounting Hole Diameter Is 0.5" (12Mm). Also Each Terminal Of The 12V Momentary Switch Has A Screw For Easy Installation. With The Mounting Panel, You Can Easily Fix This 12 Volt Toggle Switch In The Position That You Specify, Greatly Saving Your Time And Money..
Features
- Waterproof Cap Cover --- This toggle switch 12V comes with a waterproof boot cap cover. The rubber cover not only can protect the switch in moist environment, but also play a dust-proof function in dusty weather. Of course, this waterproof cover makes the marine toggle switch looks more delicate and high quality.
- Switch Mounting Plate --- The car toggle switch is equipped with mounting panel, and its mounting hole diameter is 0.5 (12mm). Also each terminal of the 12V momentary switch has a screw for easy installation. With the mounting panel, you can easily fix this 12 volt toggle switch in the position that you specify, greatly saving your time and money.
- ON OFF Switch --- The ON/OFF toggle switch is 2 pin SPST design, and the rating of this automotive switch is 30A 12VDC; 15A 250VAC; 20A 125VAC. These SPST toggle switches operate flexibly and have a long service life, which is a good purchase for you.
- Wide Application --- This heavy duty toggle switch is widely applied to all kinds of additional electric equipment that inside and outside of the automotive, cars, motorcycles, trucks, tractors, RVs, ATVs, marine, boats, ships, etc. With this 12 volt switch, it facilitates the personalized modification of your vehicle.
- What You Get --- The package includes 1 x 12V toggle switch, 1 x switch mounting panel, 1 x waterproof cap cover, 2 x metal nuts, 1 x metal washer and 4 x mounting screws. Our ON/OFF switches are quick to install and easy to use, please feel free to contact us if confused.
- See more on Amazon...
Brand: RVMARINEPAT | Manufacturer: RVMARINEPAT
Dimensions: 1.15 x 0.58 x 2.21 inches
See On Amazon #22
Nilight 3 Gang Rocker Switch Panel Blue Backlit with PD Type C and USB Charger Voltmeter Waterproof 12V 24V DC Rocker Switch with Night Glow Stickers for Car Trucks Boats RVs,2 Years Warranty,Blue/Box
Asin: B0BQ6KT2XX | Model: 90312B-D | PartNumber: 90312B-D | Ean: 0840323901543 | UPC: 840323901543
Usb Charger And Voltmeter: Pd Type C And Qc 3.0 Usb Charger Enable You Charge Two Devices Simultaneously At Full Speed. It Works For All Usb-Powered Devices. Makes The Charger 40% Faster Than Conventional Chargers; The Voltmeter Is Built In The Center Of The Usb Charger, Clearly Shows The Current Readings Of Working Volts, Easily Notice The Voltage Condition Of The Vehicles..
Wide Application: The Switches Allows You To Control Up To 3 Different Devices,Such As Led Light Bars, Rear Lights, Rock Lights, Windshield Lights,Off Road Lights, Sasquatch Lights, Zombie Lights And Wench Power, Etc. The Complimentary Transparent And Night Glow Stickers Enables You To Diy The Switch According To Your Preference..
Package Includes: 3 Gang Pre-Wired Switch Box With Pd Type C And Qc 3.0 Usb Charger And Voltmeter, 1X Transparent Stickers,1X Night Glow Stickers, 6 Screws. 2 Year Warranty By Nilight..
Surface Mount: With Surface Mount Enclosure. The Box Can Be Mounted Either On The Dash Board, Under Dashboard, Middle Console Or Anywhere On The Car. The Bracket Can Be Adjusted 360 Degrees.This Gives You More Mounting Options..
Weatherproof Box: The Switch Box Is Designed To Be Waterproof,Weatherproof And Splash Proof. The Box Is Made Of Quality Aluminum And Protects The Switches Against Short Circuit And Damage. All Switches Are Pre-Wire For Easy Installation..
Features
- Multi-Function designed: This switch box is integrated with 3x20 amps Rocker switches rated at 12VDC and PD Type C& QC 3.0 USB charger with LED voltmeter. Suitable for most 12V-24V DC cars, UTVs/ATVs, trucks, trailers, RVs, caravans, buses, marine boats, yachts etc.
- Weatherproof Box: The switch box is designed to be waterproof,weatherproof and splash proof. The box is made of quality aluminum and protects the switches against short circuit and damage. All switches are pre-wire for easy installation.
- USB Charger and Voltmeter: PD Type C and QC 3.0 USB Charger enable you charge two devices simultaneously at full speed. It works for all USB-powered devices. Makes the charger 40% faster than conventional chargers; The voltmeter is built in the center of the USB charger, clearly shows the current readings of working volts, easily notice the voltage condition of the vehicles.
- Surface Mount: With surface mount enclosure. The box can be mounted either on the dash board, under dashboard, middle console or anywhere on the car. The bracket can be adjusted 360 degrees.This gives you more mounting options.
- Wide Application: The switches allows you to control up to 3 different devices,such as Led Light Bars, Rear Lights, Rock Lights, Windshield Lights,Off road Lights, Sasquatch Lights, Zombie lights and Wench power, etc. The complimentary transparent and night glow stickers enables you to DIY the switch according to your preference.
- Package Includes: 3 Gang pre-wired switch box with PD Type C and QC 3.0 USB charger and voltmeter, 1X transparent stickers,1X night glow stickers, 6 screws. 2 Year Warranty by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 3.39 x 5.75 x 5.12 inches
Warranty: 2 Year Warranty
See On Amazon #23
2PCS 3 Way Toggle Switch with 2 Waterproof Boot Caps,15A 250VAC ON-Off-ON Toggle Switch for Ignition & Pressurization,Universal 3 Position Toggle Switch Fits Car SUV Boat (3 Pin)
Asin: B0CZQ1762G | Model: Toggle Switch | PartNumber: Toggle Switch
🚲 Metal Products - Toggle Switch Is Strictly Made Of Brass, Iron, Gum Wood And Other Materials, And Has The Excellent Characteristics Of Not Easy To Wear Under The Processing Of Lean Technology. In Addition, Since The Main Material Is Metal, The Product Has High Density, Stable Wear Resistance, And Is Not Prone To Failure..
🚲 Wider Application - This 3 Way Toggle Switch Is Versatile And Can Be Used In Various Fields Of Life Ignition Start And Voltage Pressurization, Such As Industrial Control Field, Instrumentation, Electrical Equipment, Household Appliances And So On. Please Believe That Bringing It Home Will Not Be A Wrong Choice..
🚲 High Conductivity - Our 12 Volt Toggle Switch Is Made Of Thickened Metal Purple Copper Contacts, Which Are Highly Conductive, Energizing Well During Normal Use And Not Easy To Fail. All-Copper Pin And Screw Connection Design Makes Each End Contact More Sensitive And Voltage More Stable. Small Switches Play A Big Energy..
🚲 Water Resistant Rubber Cap - The Product Has Been Improved And Upgraded, Pay More Attention To The Use Of Product Experience, For Each Toggle Switch Is Equipped With A Switch Water Resistant Cap, Used To Prevent External Dust Into The Switch, Reduce The Possibility Of Switch Failure, Extend The Service Life..
Features
- 3 Position Toggle Switch - This 3 foot 3 position switch product size is 2.11*1.11*0.60 inches, bolt diameter 0.46"/11.68mm, switch diameter 0.22"/5.58mm, 220V rated mini switch. Universal design is used, but please still need to check the size information you need in detail before placing an order in case of mismatch.
- Water Resistant Rubber Cap - The product has been improved and upgraded, pay more attention to the use of product experience, for each toggle switch is equipped with a switch water resistant cap, used to prevent external dust into the switch, reduce the possibility of switch failure, extend the service life.
- Metal Products - Toggle switch is strictly made of brass, iron, gum wood and other materials, and has the excellent characteristics of not easy to wear under the processing of lean technology. In addition, since the main material is metal, the product has high density, stable wear resistance, and is not prone to failure.
- High Conductivity - Our 12 volt toggle switch is made of thickened metal purple copper contacts, which are highly conductive, energizing well during normal use and not easy to fail. All-copper pin and screw connection design makes each end contact more sensitive and voltage more stable. Small switches play a big energy.
- Wider Application - This 3 way toggle switch is versatile and can be used in various fields of life ignition start and voltage pressurization, such as industrial control field, instrumentation, electrical equipment, household appliances and so on. Please believe that bringing it home will not be a wrong choice.
- See more on Amazon...
Brand: SSNNUU | Manufacturer: SSNNUU
Dimensions: 0.58 x 2.15 x 1.18 Inches | Weight: 0.11 Pounds
See On Amazon #24
Black Car Start Stop Off Button Engine Ignition Switch Off Button Cover Replacement for BMW 1 2 3 4 Series F20 F21 F22 F23 F30 F31F32 F33
Asin: B0D3HTT1TJ
Protection: Made Of High Quality Abs Plastic Treatment，Prevents Your Car From Finger Nails And Keys Scratches. Covering The Existing Scratches.This Cover Trim Is Sturdy, Rustless And Scratch-Resistant, To Ensure Maximum Strength For Long Lasting Usag.
Package Included: 1Xengine Start Stop Switch Off Button Replacement..
Before You Purchase, Pls Double Check Your Car Button By Referring To The 2Nd Image. If You Don't Know Whether This Cover Fits Your Car Or Not, Pls Ask Us By Sending Your Button Photos. We Will Help You..
Features
- Compatible with BMW 1 Series F20 F21, 2 Series F22 F23 F87, 3 Series F30 F31 F34 F80, 4 Series F32 F33 F36 F82 F83 .
- Before you purchase, pls DOUBLE CHECK your Car button by referring to the 2nd image. If you don't know whether this cover fits your car or not, pls ask us by sending your button photos. We will help you.
- Protection: Made of High Quality ABS Plastic treatment Prevents your car from finger nails and keys scratches. Covering the existing scratches.this cover trim is sturdy, rustless and scratch-resistant, to ensure maximum strength for long lasting usag
- Package included: 1xEngine Start Stop Switch Off Button Replacement.
- See more on Amazon...
Brand: CYCDIY | Manufacturer: CYCDIY
See On Amazon #25
Engine Push Start Stop Button Cover for Infiniti Q50L QX50 Q50 QX56 Q60 QX70 Q70L QX80 QX30, Ignition Button Decoration Trim & Ring Protector Stickers Car Accessories for Infiniti (Black)
Asin: B0D12HTM38 | Ean: 0793288067222 | UPC: 793288067222
【Easy Installation】 There Is A Double Sides Adhesive Tape On The Back Of The Engine Start Stop Button Sticker, Which Strengthens The Adhesive And Does Not Fall Off Easily. No Any Drill, Non-Destructive Installation, Convenient And Fast, Does Not Affect The Use Of Car Button Start, And Gives You An Extra Sense Of Ceremony. Pro Tip: Don’T Forget To Heat The Back Tape With A Hairdryer, Specifically In Winters, For Perfect Adhesion..
【100% Brand New】 100% Brand New And High Quality, Exquisite Workmanship, The Switch Button Cover Accessories Won't Hurt Your Car, Can Cover The Original Scratches And Wear, And Can Also Be Decorated..
【Decorate Your Cars】 Push Start Button Ring And Trim Is Dedicated To Give Your Vehicle A Wonderful Look And Give You An Extra Sense Of Ceremony. Provides A High Class And Fashion Decor Style For Your Car, Change The Ordinary Interior Design Of The Car And Add Unique Colors To Your Car, Chic Yet Exclusive, These Make Your Car Stand Out Amongst All For Sure..
【Best Quality Material Guaranteed】 The Engine Start Stop Button Is Made Of Premium Grade Cnc Aluminum Alloy Material But Not Plastic, And Has Been Polished Plating On The Entire Surface Of The Metal That Ensure Beauty And Long Term Commitment. Both Feel And Gloss Are Amazing, Which Is Durable, Scratch-Resistant, Dirt-Resistant, Corrosion-Resistant, And Delicate Touch. It Can Cover Existing Scratches And Also Prevent Your Car Engine Button From Fingernails, Key Scratches, Etc..
Features
- The Right Fit For Infiniti This push start button cover fits for Infiniti Q50L QX50 Q50 QX56 Q60 QX70 Q70L QX80 QX30, design according to the real vehicle, fit to the vehicle perfectly. Check your car s ignition button diameter and go for the right choice of car accessories.
- Best Quality Material Guaranteed The Engine Start Stop Button is made of premium grade CNC aluminum alloy material but not plastic, and has been polished plating on the entire surface of the metal that ensure beauty and long term commitment. Both feel and gloss are amazing, which is durable, scratch-resistant, dirt-resistant, corrosion-resistant, and delicate touch. It can cover existing scratches and also prevent your car engine button from fingernails, key scratches, etc.
- Easy Installation There is a double sides adhesive tape on the back of the engine start stop button sticker, which strengthens the adhesive and does not fall off easily. No any drill, Non-destructive installation, convenient and fast, does not affect the use of car button start, and gives you an extra sense of ceremony. Pro tip: Don t forget to heat the back tape with a hairdryer, specifically in winters, for perfect adhesion.
- Decorate Your Cars Push start button ring and trim is dedicated to give your vehicle a wonderful look and give you an extra sense of ceremony. Provides a high class and fashion decor style for your car, change the ordinary interior design of the car and add unique colors to your car, chic yet exclusive, these make your car stand out amongst all for sure.
- 100% Brand New 100% brand new and high quality, exquisite workmanship, the switch button cover accessories won't hurt your car, can cover the original scratches and wear, and can also be decorated.
- See more on Amazon...
Brand: ALETAI | Manufacturer: DONGDA US Direct
See On Amazon #26
699-101 Accelerator Pedal Sensor Fit for Cadillac Escalade Chevrolet Avalanche Silverado Suburban Tahoe GMC Sierra 1500 2500 3500 Yukon Hummer H2 Replace 15120405 15264643 89059124
Asin: B0D2WW44XB
Improved Engine Performance:By Accurately Monitoring The Position Of The Accelerator Pedal,Fuel Delivery Is Optimized And Fuel Efficiency Is Improved,Thereby Making The Engine Run Smoother And More Efficiently,Which Is Conducive To Safe Driving By The Driver.
Installation:Plug And Play,Easy To Install,Saving Your Time And Energy.Special Note: You Need To Disconnect The Battery Power Before Installation.
High Quality Material:699-101 Accelerator Pedal Sensor Housing Is Made Of Durable Plastic,Rugged And Durable,Protects Internal Components From Damage And Environmental Factors.The Interior Is Made Of High-Precision Resistance Materials,With Fast Response,High Reliability And Long Service Life.
Effectively Solve Problems: 699-101 Accelerator Pedal Sensor Effectively Solves Problems Such As Poor Pedal Response, Engine Code Errors, Poor Acceleration, And Unstable Idling.
Features
- Compatibility:699-101 accelerator pedal sensor fit for Cadillac Escalade,fit for Chevrolet Avalanche Silverado Suburban 1500 2500 3500 Tahoe,fit for GMC Sierra Yukon 1500 2500 3500,fit for Hummer H2.Replace 5S11471 APS106 APS131 G92004 PPS1005 PPS1030 SU12924 15120405 15264643 89059124
- Effectively Solve Problems: 699-101 accelerator pedal sensor effectively solves problems such as poor pedal response, engine code errors, poor acceleration, and unstable idling
- Improved Engine Performance:By accurately monitoring the position of the accelerator pedal,fuel delivery is optimized and fuel efficiency is improved,thereby making the engine run smoother and more efficiently,which is conducive to safe driving by the driver
- High Quality Material:699-101 accelerator pedal sensor housing is made of durable plastic,rugged and durable,protects internal components from damage and environmental factors.The interior is made of high-precision resistance materials,with fast response,high reliability and long service life
- Installation:Plug and play,easy to install,saving your time and energy.Special note: You need to disconnect the battery power before installation
- See more on Amazon...
Brand: WADYDZMFCF | Manufacturer: WADYDZMFCF
See On Amazon #27
2X Air Car Radio Control Knob Dial Tuner Suitable for 22912547 Air Conditioner Button Broadcast Knob Switch Buttons Cute Caps Replacement Air Conditioner Switch Tune
Asin: B0D3HBMCL7 | Ean: 7619440529182
The Control Knob Button Can Perfect Fit-Directly Replaces Your Original, Lost, Worn Broken Knobs, Exact Match, Fits Perfectly..
The Switch Buttons Control Cover Is Equipped With Decoration Matching With Your Car To Add Some Bright Color To Your Car, So That Your Car Is No Longer-Monotonous. The Thread Design On The-Surface Adds Knob Texture, Which Is Practical And Beautiful..
Easy To Install, Just Take Out Knob, Then Insert The New Knob, Then It Will Be-Ok..
No Need For Any Other Tools, Just Take Out Knob,Then Insert The New Knob, Without Drilling Cutting, Labor-Saving And Time-Saving, You Can Install By Yourself..
Features
- Made from the ABS wear-resistant, and dust-proof.
- No need for any other tools, just take out knob,then insert the new knob, without drilling cutting, labor-saving and time-saving, you can install by yourself.
- The control knob button can perfect fit-directly replaces your original, lost, worn broken knobs, exact match, fits perfectly.
- Easy to install, just take out knob, then insert the new knob, then it will be-ok.
- The switch buttons control cover is equipped with decoration matching with your car to add some bright color to your car, so that your car is no longer-monotonous. The thread design on the-surface adds knob texture, which is practical and beautiful.
- See more on Amazon...
Brand: Tzxncbzxc | Manufacturer: Tzxncbzxc
See On Amazon #28
Jaronx Compatible with BMW Trunk Button Cover Rear Trunk Tailgate Button Replacement 1' E81/E82, 2' F22/F23,3' E90/F30,4' F32, 5' E60/F10/F11, 6' E63/F12, 7' F01/F02, X1 E84,X3 F25, Z4 E89/G29(Red)
Asin: B0CYGWVTS3 | Model: Tailgate Button | PartNumber: Tailgate Button
Upgraded Rear Trunk Button: The Oem Trunk Release Buttons Are Coated With An Awful Soft Touch Coating That Peels Easily. Compared With The Original, Our Idrive Buttons Are More Solid And Will Not Wear Out..
Easy Installation: With A Quick And Hassle-Free Installation Process That Takes Just One Minute, You Can Swap Out The Old Truck Button Without Any Damage To Your Air Conditioning Control Panel. The Installation Video Is Displayed In The Listing Page..
Seamless Button Replacement: Our Tailgate Switch Button Is Meticulously Designed To Match The Original Specifications, Preserving The Car's Original Grooves Flawlessly. With A Single-Layer Design, You Can Bid Farewell To Worries About Cracks..
Premium Materials: Our Tailgate Rear Trunk Buttons Are Made Of Abs+Pc Material. We Laser Etch The Button Pattern So The Light Will Pass Through The Letters And The Illumination Is Equal And Not Cloudy. The Surface Coating Can Prevent The Nails, Key Scratches..
Features
- Fitment: Our tailgate button is compatible with BMW 1' E81 E82 E87 E88 F20 F21 (2006-2017), 2' F22 F23 F87 (2012-2017), 3' E90 E91 E92 E93 F30 F31 F34 F80 (2004-2017), 4' F32 F33 F36 F82 F83 (2012-2018), 5' E60 E61 F07 F10 F11 G30 (2001-2019), 6' E63 E64 F06 F12 F13 (2002-2017), 7' F01 F02 F04 (2007-2012), X1 E84 (2008-2015), X3 F25 (2009-2017), Z4 E89 G29 (2008-2019).
- Premium materials: Our tailgate rear trunk buttons are made of ABS+PC material. We laser etch the button pattern so the light will pass through the letters and the illumination is equal and not cloudy. The surface coating can prevent the nails, key scratches.
- Upgraded Rear Trunk Button: The OEM trunk release buttons are coated with an awful soft touch coating that peels easily. Compared with the original, our iDrive buttons are more solid and will not wear out.
- Seamless Button replacement: Our tailgate switch button is meticulously designed to match the original specifications, preserving the car's original grooves flawlessly. With a single-layer design, you can bid farewell to worries about cracks.
- Easy installation: With a quick and hassle-free installation process that takes just one minute, you can swap out the old truck button without any damage to your air conditioning control panel. The installation video is displayed in the listing page.
- See more on Amazon...
Brand: Jaronx | Manufacturer: Jaronx
See On Amazon #29
Power Seat Switch Driver Side Passenger Side Compatible with Ford Lincoln Mercury Replaces for 9L3Z-14A701-A 5F9Z-14A701-AA PSW5
Asin: B0CXHW1HD9 | Model: RLP-5F9Z-14A701-AA | PartNumber: RLP-5F9Z-14A701-AA
Ensure Fit - Compatible With 2007-2014 Ford Edge, 2007-2012 Ford Escape, 2007-2015 Ford Expedition, 2006-2015 Ford Explorer, 2008-2015 Ford F-250/350/450 Super Duty, 2009-2015 Ford Flex, 2006-2010 Ford Fusion, 2008-2015 Ford Taurus, 2007-2014 Lincoln Mkx, 2007-2011 Mercury Mariner, 2006-2011 Mercury Milan, 2006-2010 Mercury Mountaineer, Please Input Your Make, Model And Trim Level Into The Amazon Garage To Make Sure This Part Fits Your Exact Vehicle..
12-Month Warranty - This Power Seat Adjuster Switch Comes With 12 Months Warranty, It Is Guaranteed To Remain In Good Operating Condition While You Own It, If The Switch Ever Fails Or Any Other Problems, Simply Contact Us For Free Replacement Or Refund..
Relaces Part # - 9L3z14a701a, 5F9z-14A701-Aa, Psw5, 1S9085, Sw7258, Sw6550, Perfect Replace The Drive And Passenger Side Seat Adjuster Switch On Your Ford Lincoln Or Mercury, Please Check Your Old Part Against The Picture To Make Sure This Parts Fits On Your Vehicle Exactly..
Excellent Quality - All Of The Switches Are Made To Oe Specification To Ensure Proper Fit, Form And Function, Copper Alloy Conductors Ensure Superior Electrical Conductivity With Low Resistive Losses..
Features
- Direct Replacement - This power seat switch is a direct-fit replacement electrically operated switch that replaces damaged OE units restoring door seat function, 8 pins terminal connector.
- Excellent Quality - All of the switches are made to OE specification to ensure proper fit, form and function, copper alloy conductors ensure superior electrical conductivity with low resistive losses.
- Ensure Fit - Compatible with 2007-2014 Ford Edge, 2007-2012 Ford Escape, 2007-2015 Ford Expedition, 2006-2015 Ford Explorer, 2008-2015 Ford F-250/350/450 Super Duty, 2009-2015 Ford Flex, 2006-2010 Ford Fusion, 2008-2015 Ford Taurus, 2007-2014 Lincoln MKX, 2007-2011 Mercury Mariner, 2006-2011 Mercury Milan, 2006-2010 Mercury Mountaineer, Please input your make, model and trim level into the Amazon Garage to make sure this part fits your exact vehicle.
- Relaces Part # - 9L3Z14A701A, 5F9Z-14A701-AA, PSW5, 1S9085, SW7258, SW6550, perfect replace the drive and passenger side seat adjuster switch on your Ford Lincoln or Mercury, Please check your old part against the picture to make sure this parts fits on your vehicle exactly.
- 12-Month Warranty - This power seat adjuster switch comes with 12 months warranty, it is guaranteed to remain in good operating condition while you own it, if the switch ever fails or any other problems, simply contact us for free replacement or refund.
- See more on Amazon...
Brand: RLP | Manufacturer: Rocklike Promise
Dimensions: 2.00 x 3.50 x 1.50 Inches
See On Amazon #30
Ripple Junction Gran Turismo Men s Short Sleeve T-Shirt Ignition Push Start Engine Button Playstation Inspired Icon SM White
Asin: B0C94WYBQC | Ean: 0197665242651 | UPC: 197665242651
Sizes For Fans: This Comfy Tee Comes In A Range Of Sizes From Small To Xx-Large, Please Refer To Our Size Chart To Find Your Best Fit..
The Real Driving Simulator: Genuine Licensed Apparel Based On A True Story. Join The Ranks Of Jann Mardenborough As He Competes For A Chance To Become A Racecar Driver Through The Playstation Video Game Gran Turismo. Follow This Action Packed Story Filled With Twists And Turns In Style With This Icon Tee From Ripple Junction..
Racer Ready: Mix And Match With Your Favorite Ripple Junction Gran Turismo Shorts, Hoodies, And Hats To Make For The Perfect Racing Outfit..
Ultra High Detail Design: Unsurpassed Ripple Junction Attention To Detail Ensures The Highest Quality Of Design And Detail That True Fans Will Always Recognize And Appreciate..
Features
- POWER AND PRECISION: High performance, moisture wicking cotton construction for all day comfort and all-night style. Perfect for your e-sports competition or booting up your classic copy of Gran Turismo.
- ULTRA HIGH DETAIL DESIGN: Unsurpassed Ripple Junction attention to detail ensures the highest quality of design and detail that true fans will always recognize and appreciate.
- SIZES FOR FANS: This comfy tee comes in a range of sizes from Small to XX-Large, please refer to our size chart to find your best fit.
- RACER READY: Mix and match with your favorite Ripple Junction Gran Turismo shorts, hoodies, and hats to make for the perfect racing outfit.
- THE REAL DRIVING SIMULATOR: Genuine licensed apparel based on a true story. Join the ranks of Jann Mardenborough as he competes for a chance to become a racecar driver through the PlayStation video game Gran Turismo. Follow this action packed story filled with twists and turns in style with this icon tee from Ripple Junction.
- See more on Amazon...
Brand: Ripple Junction
Weight: 0.25 Pounds
See On Amazon
Looking For Something Else?
Search