Best skateboard parts - Buying Guide
Last Updated: 05/12/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
Bones Reds Bearings 8 pk w/Spacers & Washers Bundle
Asin: B0798WGCB1 | Model: Reds | PartNumber: Reds | Ean: 7426847110529, 0714038116700, 0714038116694, 7426847110475, 0714038117271 | UPC: 714038116694, 714038117271, 714038116700
Pre-Lubricated With Speed Cream Racing Lubricant.
Includes 4 Spacers And 8 Washers.
Skate Rated Clearances, Tolerances, Materials And Lubricant Provide The Best Performance And Durability Possible.
High Speed Nylon Ball Retainer For Greater Strength And Speed.
Features
- Single, non-contact, removable rubber shield for easy cleaning and less friction
- High speed Nylon ball retainer for greater strength and speed
- Pre-lubricated with Speed Cream racing lubricant
- Skate Rated clearances, tolerances, materials and lubricant provide the best performance and durability possible
- Includes 4 spacers and 8 washers
- See more on Amazon...
Brand: BONES BEARING | Manufacturer: Bones Bearings
Dimensions: 1.00 x 5.00 x 2.00 inches | Weight: 0.20 pounds
See On Amazon #2
Mr. Pen- Clear, 39.4" x 10.6", Waterproof, Non Slip Scooter Grip Tape, Skateboard Tape, Grip Tape for Skateboards, Skate Grip Tape.
Asin: B0949SK7B8 | Model: GSW01 | PartNumber: GSW01 | Ean: 0810053333563 | UPC: 810053333563
It Is Easy To Trim The Extra Edge With A Blade Cleanly For Customized Fit..
Peel Off The Paper On The Back, Aim At The Edge Of The Skateboard, Stick The Grip Tape On The Skateboard, And Use A Knife To Cut Off The Excess..
Mr. Pen Skateboard Grip Tapes With Exclusive Perforation Technique Provide Bubble-Free Support. It Will Not Peel Off When Exposed To Cold Or Heat..
Our Grip Tape Measures 39.4" X 10.6". It Can Be Widely Used In Most Skateboards, Skate Scooters, Kick Scooters, Slide Plates, Roller Boards, Etc..
Features
- Mr. Pen Grip tape for skateboard is made of exclusive emery and high-density sand grains. Also, it is non-slip and wear-resistant, and the sticky surface of sandpaper is strong and not easy to fall off.
- Our grip tape measures 39.4 x 10.6. It can be widely used in most skateboards, skate scooters, kick scooters, slide plates, roller boards, etc.
- It is easy to trim the extra edge with a blade cleanly for customized fit.
- Mr. Pen skateboard grip tapes with exclusive perforation technique provide bubble-free support. It will not peel off when exposed to cold or heat.
- Peel off the paper on the back, aim at the edge of the skateboard, stick the grip tape on the skateboard, and use a knife to cut off the excess.
- See more on Amazon...
Brand: Mr. Pen | Manufacturer: Mr. Pen
See On Amazon #3
Rollerbones Bearings 8mm 16 Pack
Asin: B0094J6GQ0 | Model: 17506719820 | PartNumber: 17506719820 | Ean: 7662558308248, 0175067198202, 0757183415663, 0845584050412, 0785571867305 | UPC: 845584050412, 175067198202, 757183415663, 785571867305
Removable Non-Contact, Frictionless Rubber Shields.
Pre-Lubricated With Speed Cream Racing Lubricant..
Internal Geometries And Clearances Modified For Skating..
Fast, Long Lasting, And Easy To Clean.
Precision Ground Skate Bearings With Removable High Speed Nylon Ball Cages.
Features
- 16 Pack of 8mm Bearings - Enough for One Pair of Skates
- Precision ground skate bearings with removable high speed nylon ball cages
- Removable non-contact, frictionless rubber shields
- Fast, long lasting, and easy to clean
- Pre-lubricated with Speed Cream racing lubricant.
- Internal geometries and clearances modified for skating.
- See more on Amazon...
Brand: Rollerbones | Manufacturer: RollerBones
Dimensions: 2.36 x 1.18 x 4.72 inches | Weight: 0.40 pounds
See On Amazon #4
SHKI 10 Pack 608 2RS Ball Bearings Bearing Steel and Double Rubber Sealed Miniature Deep Groove Ball Bearings for Skateboards, Inline Skates, Scooters (8mm x 22mm x 7mm)
Asin: B08XVFSZTF | Model: 608-2RS Ball Bearing | PartNumber: 608-2RS Ball Bearing | Ean: 0782910300806 | UPC: 782910300806
2. Low Friction: The Low Friction Coefficient Of These Bearings Allows Them To Spin With Minimal Resistance, Reducing Energy Loss And Extending Their Lifespan..
Overall, The Features And Advantages Of 608-2Rs Ball Bearings Make Them An Excellent Choice For Small Machinery Applications That Require Smooth, Efficient Operation And High Durability..
4. Versatility: These Bearings Are Widely Used In A Variety Of Small Machinery Applications, Including Skateboard Wheels, Inline Skates, And Electric Motors..
5. Easy To Install: 608-2Rs Bearings Are Relatively Easy To Install And Replace, Making Them A Convenient And Cost-Effective Solution For Many Applications..
3. High Durability: The Rubber Seals Protect The Bearing, Increasing Their Durability And Longevity..
1. Smooth Operation: 608-2Rs Ball Bearings Are Designed To Provide A Smooth And Efficient Operation, Which Is Essential For High-Speed Applications..
Features
- 608-2RS ball bearings are a type of deep groove ball bearing that has two rubber seals to protect the bearing. These bearings are commonly used in skateboard wheels, inline skates, and other small machinery.
- 1. Smooth operation: 608-2RS ball bearings are designed to provide a smooth and efficient operation, which is essential for high-speed applications.
- 2. Low friction: The low friction coefficient of these bearings allows them to spin with minimal resistance, reducing energy loss and extending their lifespan.
- 3. High durability: The rubber seals protect the bearing, increasing their durability and longevity.
- 4. Versatility: These bearings are widely used in a variety of small machinery applications, including skateboard wheels, inline skates, and electric motors.
- 5. Easy to install: 608-2RS bearings are relatively easy to install and replace, making them a convenient and cost-effective solution for many applications.
- Overall, the features and advantages of 608-2RS ball bearings make them an excellent choice for small machinery applications that require smooth, efficient operation and high durability.
- See more on Amazon...
Brand: SHKI | Manufacturer: SHKI
See On Amazon #5
6 Packs Skateboard Wall Mount Aluminum Skateboard Hanger with Two Screw Holes for Display Skateboard Deck Storage Horizontal and Floats Vertically - Silver
Asin: B0BX9MW91Z | Ean: 0670526358789 | UPC: 670526358789
Strong And Sturdy: The Skateboard Hanger Made Of High Quality Aluminum,, Durable Enough, Rust-Proof And Will Not Deform..
Easy To Install & Protective Washer: The Entire Installation Process Can Be Completed In 5 Minutes. Included 4 Plastic Protective Spacers Per Hanger That Prevent The Metal Nuts And Caps From Scratching Up Your Board..
Black Anodized Aluminum Screw Cap: The Design Of The Screw Cap Rotating Thread Makes It Easy To Twist When Mount Or Dismount Your Skateboards As You Please. Surface Anodic Oxidation Treatment Makes The Color Brighter..
Display Your Skateboard Deck On The Wall: Screw Size Fits Most Skateboards, Supreme Deck & Longboards. No Need To Re-Drill. You Can Hang A Board Vertically (Used 1 Hanger) Or Horizontally (Used 2 Hangers).
Features
- BETTER STABILITY: Our skateboard wall mount has 2 screw holes for provide better stability. You can also use only one screw that makes installation easy, and you don't have to worry about drilling holes that aren't level.
- DISPLAY YOUR SKATEBOARD DECK ON THE WALL: Screw size fits most skateboards, supreme deck & longboards. No need to re-drill. You can hang a board Vertically (used 1 hanger) or horizontally (used 2 hangers)
- STRONG AND STURDY: The skateboard hanger made of high quality aluminum,, durable enough, rust-proof and will not deform.
- BLACK ANODIZED ALUMINUM SCREW CAP: The design of the screw cap rotating thread makes it easy to twist when mount or dismount your skateboards as you please. Surface anodic oxidation treatment makes the color brighter.
- EASY TO INSTALL & PROTECTIVE WASHER: The entire installation process can be completed in 5 minutes. Included 4 plastic protective spacers per hanger that prevent the metal nuts and caps from scratching up your board.
- See more on Amazon...
Brand: Generic | Manufacturer: ezbnb
See On Amazon #6
ZUEXT 11" x 50" Clear Skateboard Grip Tape, Waterproof Scooter Griptape, Longboard Grip Tape, Anti Slip Bubble Free Transparent Griptape for Rollerboard Stairs Pedal Wheelchair Step (125x27cm)
Asin: B0755WR3XR | Ean: 0602668015749 | UPC: 602668015749
Timeproof High-Strength Quality: Thick Up To 1.5Mm. Exclusive Silicon-Carbide Grit Binding Process For Grip That Will Not Wear Out.Super Sticky Adhesive That Won't Peel In Extreme Heat Or Cold..
11" X 50" Skateboard Tape.
Very Sticky And Easy To Apply! Works Great For Difficult Projects Such As Scooters, You Are Able To Cut It Down To The Proper Size Pretty Easy. The Color Doesn’T Fade And The Grit Is Not Hard On Your Shoes..
Clean Skateboard Grip Tape Sheet 11" X 50".
Easy To Cut And Trim To Fit Most Skateboards, Scooters.It Is Thick Enough To Be Easy To Apply And Hasn’T Lift.
Used It To Re-Deck Some Scooters. The Scraps Where Good For Some Other Projects Too And It Works Well..
Pro Grade Grip Tape: Adhesion And Grip Designed For Scooter And Skateboard Riders Of All Levels. Improves Rider's Grip Which Leads To Better Tricks And Greater Safety..
Skateboard Grip Tapes.
Bubble Free: Zuext Grip Tape With Hundreds Of Barely-Visible Perforations That Allow Air To Escape For A Bubble-Free Application..
Features
- Clean Trim to Fit: Waterproof, Tear-proof backing that trims cleanly every time. Size 11" x 50"(125x27cm) widely cut to fit most Razor, Lucky, Micro, Phoenix, kick, electric, gas, kids, or adult scooter and skateboards.
- Bubble Free: ZUEXT Grip tape with hundreds of barely-visible perforations that allow air to escape for a bubble-free application.
- Timeproof High-strength Quality: Thick up to 1.5mm. Exclusive Silicon-Carbide grit binding process for grip that will not wear out.Super sticky adhesive that won't peel in extreme heat or cold.
- Pro Grade Grip Tape: Adhesion and grip designed for scooter and skateboard riders of all levels. Improves rider's grip which leads to better tricks and greater safety.
- Easy to cut and trim to fit most skateboards, scooters.It is thick enough to be easy to apply and hasn t lift
- Used it to re-deck some scooters. The scraps where good for some other projects too and it works well.
- Very sticky and easy to apply! Works great for difficult projects such as scooters, you are able to cut it down to the proper size pretty easy. The color doesn t fade and the grit is not hard on your shoes.
- Clean skateboard grip tape sheet 11 x 50
- skateboard grip tapes
- 11 x 50 skateboard tape
- See more on Amazon...
Brand: ZUEXT | Manufacturer: ZUEXT
Weight: 0.51 pounds
Warranty: 24 Months Free Warranty
See On Amazon #7
Arkorus Skateboard Wall Mount, Premium Skateboard Hanger Vertical Storage Durable Holder Rack for a Floating Effect to Safely Store and Display Your Skate Decks
Asin: B0BVQC1VZL
Simple Installation Via One Screw In The Wall/Drywall For A Vertical Installation. No Studs Needed! Step By Step Instructions Included With Each Skateboard Mount Package.
This Is The Perfect Solution To Store And Display Your Retired And Art Skate Decks. Each Skateboard Deck Wall Mount Is Covered By Our ⭐️Lifetime Warranty. Made In Canada.
Create A Stunning Floating Effect On Your Wall For Your Skateboard Decks Without Trucks Or With Trucks (Full Skateboard). Fits All Brands And Deck Sizes With Truck Holes Of 1.625" Of Distance. You Will Need 2X Skateboard Wall Mounts If You Want To Hang Your Board Horizontally/Diagonally..
A Small And Lightweight Acrylic Skateboard Hanger With A Futuristic Look In A Polyhedron Shaped Piece. Inspired By The Sharp Design Of The F-117 Nighthawk Stealth Plane..
Features
- 1 x Clear skateboard wall mount made of reinforced thermoplastic with its corresponding stainless-steel screws and bolts with each set. ( Additional black caps and wall anchors included.)
- A small and lightweight acrylic skateboard hanger with a futuristic look in a polyhedron shaped piece. Inspired by the sharp design of the F-117 Nighthawk Stealth plane.
- Simple installation via one screw in the wall/drywall for a vertical installation. No studs needed! Step by step instructions included with each skateboard mount package
- Create a stunning floating effect on your wall for your skateboard decks without trucks or with trucks (full skateboard). Fits all brands and deck sizes with truck holes of 1.625 of distance. You will need 2x skateboard wall mounts if you want to hang your board horizontally/diagonally.
- This is the perfect solution to store and display your retired and art skate decks. Each skateboard deck wall mount is covered by our Lifetime Warranty. Made in Canada
- See more on Amazon...
Brand: Arkorus | Manufacturer: Arkorus
Warranty: Lifetime warranty
See On Amazon #8
Bones REDS Skateboard Bearings 8 Pack
Asin: B000FDRQ1S | Model: BSACBR88 | PartNumber: BSACBR88
Ean: 0751738803943, 0400110330712, 0845584003159, 5051947074604, 4050126219950, 0175067198165, 0854175000279, 0617237764720, 3990000727908, 0175067198172, 0672032132761, 8541750002798, 4250811423376, 0175067245722, 4250668900679
UPC: 175067198172, 617237764720, 175067198165, 672032132761, 175067245722, 751738803943, 845584003159, 400110330712, 854175000279
Pre-Lubricated With Speed Cream Racing Lubricant.
Includes Set Of Eight Bearings, Instructions, And Logo Sticker.
Skate Rated Clearances, Tolerances, Materials And Lubricant Provide The Best Performance And Durability Possible.
Single, Non-Contact, Removable Rubber Shield For Easy Cleaning And Less Friction And High Speed Nylon Ball Retainer For Greater Strength And Speed.
Features
- Bones REDS are manufactured in China to our Bones Skate Rated specifications in a manufacturing facility dedicated to producing the highest quality skate bearings in China. They are inspected twice before being shipped to skaters and offer the greatest combination of performance, durability and low cost in the industry. Because they offer near Bones Swiss performance at a fraction of the cost, they have become the best selling bearings.
- Single, non-contact, removable rubber shield for easy cleaning and less friction and High speed Nylon ball retainer for greater strength and speed
- Pre-lubricated with Speed Cream racing lubricant
- Skate Rated clearances, tolerances, materials and lubricant provide the best performance and durability possible
- Includes set of eight bearings, instructions, and logo sticker
- See more on Amazon...
First Available: 08/01/2018
Brand: Bones | Manufacturer: Bones Bearings
Dimensions: 1.38 x 4.61 x 4.37 inches | Weight: 0.00 pounds
See On Amazon #9
Wellgo 608-2RS Ball Bearings Skateboard Bearings Double Rubber Sealed Shielded Miniature Deep Groove Bearings 8mm x 22mm x7mm for Skateboards Inline Skate Scooter Roller Blade Skates etc -10pcs
Asin: B07R7PR72H | Model: SK-007 | PartNumber: SK-007 | Ean: 0680904412170 | UPC: 680904412170
Widely Use : Motor,Skateboards, Inline Skates, Scooters Or Other Skating Applications Etc.
Attention : We Used Some Rust Protection Oil On The Bearings,If You Dont Want The Bearings Get Rusty Pls Do Not Put It On The Damp Place.Also When Use You'd Better Use Gloves To Touch The Bearings To Prevent It Get Rusty, As Your Finger With Sweat..
Our 608-2 Rs Bearings Shields On Both Sides Keeping Lubricant In And Contaminants Out..
Material: Carbon Steel, Durability And Resistance To Deformity Under Heavy Loads..
Features
- Package & Size : 10pcs 608-2RS ball bearings Size : 8x22x7mm, rubber sealed deep groove.
- Material: Carbon steel, durability and resistance to deformity under heavy loads.
- Widely Use : Motor,skateboards, inline skates, scooters or other skating applications etc
- Our 608-2 RS bearings Shields on both sides keeping lubricant in and contaminants out.
- Attention : We Used some rust protection oil on the bearings,if you dont want the bearings get rusty pls do not put it on the damp place.also when use you'd better use gloves to touch the bearings to prevent it get rusty, as your finger with sweat.
- See more on Amazon...
Brand: Wellgo | Manufacturer: WEWGO
Dimensions: 0.28 x 0.87 x 0.87 Inches | Weight: 0.07 Pounds
See On Amazon #10
Get Skateboard Tricks No Experience - Coolest Easter Basket Stuffers for Teens Boys Gift Ideas Ages 14 and up 12-14-16 11 10 2024 Skateboard Accessories Cool Wheels Tech Deck Tool Ramp Teenage (4 Red)
Asin: B01F49C0QS | Model: SkaterTrainer 2.0 | PartNumber: SkaterTrainer 2.0 | Ean: 0868453000202 | UPC: 868453000202
It's Fun And They Really Work: "Where Was This When I Was A Kid" Recommended By Top Skateboard Instructors, Parents, And Skaters. Check Out Our Awesome Reviews! We Have Quickly Become The Worlds Top Skateboard Acessories. Many Teenagers Are Skeptical At First Because This Is New Patented Equipment, But Once They Get Them Are Excited To See Fast Progress. Skateboarding Is All About Confidence, Which You Can Build With Skater Trainers. Easter Basket Stuffers For Teens Boys And Girls..
Perfect For All Skateboard Ages: Beginners Love How Fast They Can Learn Tricks With Skater Trainers. A Great Gift For Teens Boys And Adult Skaters Who Are Getting Back On The Skateboard Can Focus On Safety And Still Have Fun. Parents Love Them Because They Can Now Help Their Kids 8-12 And Teenagers Learn Tricks Without Worrying (And Maybe Even Learn A Few On Their Own). Teens Ages 14 And Up , Adults, Kids Ages 8-12-15, Boys, Girls, Aliens….Anyone..
Fits Any Skateboard Wheels: Skater Trainers Are Durable, Easy-To-Use, And Work On Standard Trick Skateboards, Penny, Cruiser Boards, Old School Decks, And Even Most Longboards. Fits 48Mm-70Mm Wheel Diameter, With 52Mm, 53Mm, 54Mm Being The Most Common Trick Wheels. They Stretch Over Your Wheels Easy And Are Also Very Tough. Easter Basket Stuffers For Teen Boys. Sold With In A Set Of 4 Parts..
The Perfect Skateboard Gift: Easter Basket Stuffers For Teen Boys Gift Ideas. Tweens, Teens, Men, Adults, Girls, Teenagers, Etc. A Great 2024 Spring Gift To Go With That New Skateboard. Get Some New Tricks Faster And Safer. Be The Next Tony Hawk Pro Skater Or Reclaim Your Previous Glory. As Important As Helmets, Knee Pads, Elbow Pads, Or Wrist Guards. These Skateboard Accessories Are Perfect For Anyone's Skate Tool Kit..
Features
- GET SKATEBOARD TRICKS FASTER: With Skater Trainers, learn ollies, kickflips, and more! Our patented accessories simply stretch over your wheels and stop them so you can focus on the trick movement without worrying about falling. You FALL LESS, get your CONFIDENCE UP, develop some MUSCLE MEMORY and have FUN doing it while not getting beat up. Better than a crack or grass, practice on the concrete. Once you have it, take the SkaterTrainers off and get the tricks for real, rolling in your element
- THE PERFECT SKATEBOARD GIFT: Easter Basket Stuffers for Teen Boys Gift Ideas. Tweens, Teens, Men, Adults, Girls, Teenagers, etc. A great 2024 Spring GIFT to go with that new Skateboard. Get some new tricks faster and safer. Be the next Tony Hawk Pro Skater or reclaim your previous glory. As important as Helmets, knee pads, elbow pads, or wrist guards. These skateboard accessories are perfect for anyone's skate tool kit.
- IT's FUN and THEY REALLY WORK: Where was this when I was a kid Recommended by top Skateboard Instructors, PARENTS, and SKATERS. Check out our awesome reviews! We have quickly become THE WORLDS TOP SKATEBOARD ACESSORIES. Many teenagers are SKEPTICAL at first because this is new patented equipment, but once they get them are excited to see fast progress. Skateboarding is all about confidence, which you can build with Skater Trainers. Easter basket stuffers for teens boys and girls.
- FITS ANY SKATEBOARD WHEELS: Skater Trainers are durable, easy-to-use, and work on standard trick skateboards, penny, cruiser boards, old school decks, and even most longboards. Fits 48mm-70mm wheel diameter, with 52mm, 53mm, 54mm being the most common trick wheels. They stretch over your wheels EASY and are also very TOUGH. Easter basket stuffers for Teen Boys. Sold with in a SET OF 4 parts.
- PERFECT FOR ALL SKATEBOARD AGES: Beginners love how fast they can learn tricks with Skater Trainers. A great gift for TEENS boys and ADULT skaters who are getting back on the skateboard can focus on safety and still have FUN. PARENTS love them because they can now help their kids 8-12 and teenagers learn tricks without worrying (and maybe even learn a few on their own). Teens ages 14 and up , Adults, Kids ages 8-12-15, boys, girls, Aliens .ANYONE.
- See more on Amazon...
Brand: SKATERTRAINER | Manufacturer: SkaterTrainer
Dimensions: 1.65 x 5.50 x 5.00 inches | Weight: 0.20 pounds
See On Amazon #11
Mob Skateboard Grip Tape Sheet Black 33" Long X 9" Wide - No bubble application
Asin: B002E0B2BK | Model: GT586-123 | PartNumber: GT586-123 | Ean: 0659641074392, 0796254115378, 0033586768477, 5055567808625, 0796254137592, 0757183011032 | UPC: 033586768477, 757183011032, 796254115378, 796254137592, 659641074392
High-Strength, Waterproof, Tear-Proof Backing That Trims Cleanly Every Time.
Grip Tape Sold By Bc Surf And Sport Are Carefully Rolled Then Put In Individual Boxes.
Super Sticky Adhesive That Won't Peel In Extreme Heat Or Cold.
Exclusive Silicon-Carbide Grit Binding Process For Grip That Will Not Wear Out.
Features
- The griptape choice of professional skateboarders. Hundreds of barely-visible perforations that allow air to escape for a bubble-free application
- Exclusive silicon-carbide grit binding process for grip that will not wear out
- High-strength, waterproof, tear-proof backing that trims cleanly every time
- Super sticky adhesive that won't peel in extreme heat or cold
- Grip tape sold by BC Surf and Sport are carefully rolled then put in individual boxes
- See more on Amazon...
Brand: Mob Grip | Manufacturer: Mob Grip
Dimensions: 2.50 x 9.00 x 2.50 inches | Weight: 7.00 ounces
See On Amazon #12
Alumy Skateboard Deck Display Wall Mount,Skate Deck Display Wall Mount for Skateboard Deck Display and Skateboard Deck Decoration,1PACK
Asin: B08N6TJN1N | Model: A-SKMT1-01 | PartNumber: A-SKMT1-01 | Ean: 0700204969782 | UPC: 700204969782
Durable High Quality Material: Can Sustain Up To 15Lb..
Comes With 2X 70Mm Bolts, Two Bolt Caps.
Easy To Install: No Need To Learn Complicated Instructions, Just Use An Electric Screw Driver Or Any Driver And Hammers In You Home, The Whole Installation Process Can Be Done With 5 Mins..
Compatible With Most Common Skateboard With 1.625’’ Truck Holes. No Matter For Old School Decks Or New School Decks, As Long As The Distance Between Two Truck Holes Is 1.625’’ It Can Be Perfectly Matched..
Features
- Decorate your home with your favorite decks! A must-have wall mount for skateboard enthusiasts. A brief and sturdy design wall mount for hanging and displaying art skateboard decks.
- Compatible with most common skateboard with 1.625 truck holes. No matter for old school decks or new school decks, as long as the distance between two truck holes is 1.625 it can be perfectly matched.
- Durable high quality material: can sustain up to 15lb.
- Easy to install: No need to learn complicated instructions, just use an electric screw driver or any driver and hammers in you home, the whole installation process can be done with 5 mins.
- Comes with 2x 70mm bolts, two bolt caps
- See more on Amazon...
Brand: Alumy | Manufacturer: Alumy
Weight: 0.10 Pounds
See On Amazon #13
YYST Skateboard Wall Mount Wall Hanger Rack Storage Display - W/ Hardware - No Board Included - W Style - 4/PK
Asin: B07L3CDFDM
No More Than 10 Pounds - The Rack Is Pliable , Only Hold 10 Pounds. If Your Board Is Very Heavy , Please Check Out Store To See The V Style Racks..
Only Vertically , Not Suitable For Horizontally. Please Install It Vertically To Hold The Two Wheels Of The Skateboard.- No Board Included..
Versatile Usage - Hold Your Skateboard, Sword, Cowboy Hat , Etc. Waiting For Your Imagination..
Adjustable - The Rack Is Made Of Metal Which Is Pliable. You Can Expand It Or Grip It To Fit Your Need..
Features
- 4 racks and 4 R rings and 4 screws. Hold 4 skateboards vertically. - No Board included
- Adjustable - the rack is made of metal which is pliable. You can expand it or grip it to fit your need.
- No more than 10 Pounds - the rack is pliable , only hold 10 pounds. If your board is very heavy , Please check out store to see the V style racks.
- Versatile usage - Hold your skateboard, sword, cowboy hat , etc. Waiting for your imagination.
- Only vertically , not suitable for horizontally. Please install it vertically to hold the two wheels of the skateboard.- No board included.
- See more on Amazon...
Brand: YYST | Manufacturer: YI YA SU
Dimensions: 4.00 x 2.50 x 3.00 Inches | Weight: 10.00 Pounds
See On Amazon #14
Bones Big Balls Reds Skateboard Bearings 8 Pack
Asin: B07QY4YB8F | Model: model | PartNumber: model | Ean: 8423571311184, 0842357131118 | UPC: 842357131118
Includes: Set Of 8 Bearings, Instructions, And Sticker..
Skate Rated Design.
Higher Top Speed, Greater Strength, Longer Life, Easy Cleaning, And Light Weight..
These Larger Balls Let You Roll Faster, And Keep Rolling Right Through Dirt That Slows Smaller Balls Down..
Features
- BIG BALLS, the newest member of our REDS family. BIG BALLS are engineered to roll faster and last longer by using 6, 17% larger balls, like our legendary Bones Super Swiss 6 bearings.
- These larger balls let you roll faster, and keep rolling right through dirt that slows smaller balls down.
- Includes: Set of 8 bearings, instructions, and sticker.
- Higher top speed, greater strength, longer life, easy cleaning, and light weight.
- Skate Rated Design
- See more on Amazon...
Brand: BONES BEARING | Manufacturer: Bones
Dimensions: 3.94 x 1.97 x 1.97 inches | Weight: 0.01 pounds
See On Amazon #15
Mob Grip Tape
Asin: B003V21KFS | Model: 88481001 | PartNumber: 88481001 | Ean: 0659641251342 | UPC: 659641251342
High-Strength, Waterproof, Tear-Proof Backing That Trims Cleanly Every Time.
One Sheet - 33" X 9".
Super Sticky Adhesive That Won''t Peel In Extreme Heat Or Cold.
Exclusive Silicon-Carbide Grit Binding Process For Grip That Will Not Wear Out.
Features
- Hundreds of barely-visible perforations that allow air to escape for a bubble-free application
- Exclusive silicon-carbide grit binding process for grip that will not wear out
- High-strength, waterproof, tear-proof backing that trims cleanly every time
- Super sticky adhesive that won''t peel in extreme heat or cold
- One Sheet - 33 x 9
- See more on Amazon...
Brand: Mob Grip | Manufacturer: Mob
Dimensions: 2.00 x 0.80 x 4.00 inches | Weight: 2.00 Pounds
See On Amazon #16
608-Z Shielded Sealed Miniature Skateboard-Bearings - 8x22x7mm, 10 Pcs, Used in Longboard and Scooters Machinery, Roller Skates (10)
Asin: B08L8795LS | Model: 608-Z | PartNumber: 608-Z | Ean: 0714487316140 | UPC: 714487316140
3. Scope Of Application: For Small Motor, Air Conditioning, Skateboard, Roller Skates, Inline Roller Skates, Scooters And Small Household Appliances..
5. Service Guarantee: If You Have Any Questions After Purchase, Please Contact Us In Time. We Will Serve You Wholeheartedly..
4. Sealed Structure: This Bearing Uses Double-Sided Iron Dust Cover; Effectively Prevent Dust And Debris From Entering; Protect Lubricating Oil Against Loss. Reduce Bearing Noise To Ensure Normal Operation..
2. Material Characteristics: This Product Is Made Of High Quality Carbon Steel. High Speed Operation, Low Noise, High Temperature Resistance And Smooth Rotation..
Features
- 1.Specification model: 608ZZ inner diameter: 8mm, outer diameter: 22mm, thickness: 7mm. Each 10pcs bearing is sold in one package.
- 2. Material characteristics: This product is made of high quality carbon steel. High speed operation, low noise, high temperature resistance and smooth rotation.
- 3. Scope of application: for small motor, air conditioning, skateboard, roller skates, inline roller skates, scooters and small household appliances.
- 4. Sealed structure: This bearing USES double-sided iron dust cover; Effectively prevent dust and debris from entering; Protect lubricating oil against loss. Reduce bearing noise to ensure normal operation.
- 5. Service guarantee: If you have any questions after purchase, please contact us in time. We will serve you wholeheartedly.
- See more on Amazon...
Brand: Cooswai | Manufacturer: None/Brand
See On Amazon #17
Black Diamond Sheet of Skateboard Grip Tape 9" x 33" (Black/White)
Asin: B01GGS3Z0G | Model: BDGT-TAG | PartNumber: BDGT-TAG | Ean: 0082045383416 | UPC: 082045383416
Heavy Duty - This High Quality Grip Is Super Strong, Waterproof, And Weatherproof.
Customizable – Black Diamond Grip Offers A Wide Variety Of Colors And Patterns To Choose From So Your Board Can Best Represent You..
Long Lasting - This Griptape Features Industrial Grade Glue That Adheres To Any Deck Surface. This Grip Will Not Peel Or Wear Out Easily..
Excellent Grip - The 80 Grit Silicon Carbide Surface Will Provide You With Great Traction For Your Deck. The Enhanced Grit Helps Provide Support And Gives Your Shoes A Firm Grip On The Board..
Features
- PEEL AND STICK - Easy peel and stick application of this 9 X 33 sheet of grip for your skateboard. The tape is also easy to cut for custom applications.
- EXCELLENT GRIP - The 80 grit silicon carbide surface will provide you with great traction for your deck. The enhanced grit helps provide support and gives your shoes a firm grip on the board.
- HEAVY DUTY - This high quality grip is super strong, waterproof, and weatherproof
- LONG LASTING - This griptape features industrial grade glue that adheres to any deck surface. This grip will not peel or wear out easily.
- CUSTOMIZABLE Black Diamond Grip offers a wide variety of colors and patterns to choose from so your board can best represent you.
- See more on Amazon...
Brand: BLACK DIAMOND | Manufacturer: Keystone Skate Supply
Weight: 0.25 pounds
See On Amazon #18
608 ZZ Ball Bearings, Skate Bearings Double Shielded Miniature Ball Bearings for Skateboards, Inline Skates, Scooters ABEC 7 Bearing (8mm x 22mm x 7mm) 4PCS
Asin: B092LGTD9P | Ean: 0631931387764 | UPC: 631931387764
Strong Impact Resistance- The Bearings Are Made Of Sturdy And Durable Carbon Steel, Don't Worry About Durability And Resistance To Deformity Under Heavy Loads During Jump, Slide And Impact..
Wide Application - Such As Skateboards Wheels, Inline Skates, Scooters, Longboards, Roller Skates Or Other Skating Applications Etc.
With Shields - As You Know It Is Easy To Get Dust And Soil Into The Bearing Which Will Slow Down The Bearing While We Are Sliding Outdoor. Bust Bearing With Shields On Both Sides Will Keep Contaminants Out And Save Our Bearings..
Bouncing, Landing, Kickflip, Heelflip Or Ollie, Go And Do It!.
Features
- DIMENSIONS - 8mm x 22mm x 7mm
- Bouncing, landing, kickflip, heelflip or ollie, go and do it!
- Strong Impact resistance- The Bearings are made of Sturdy and durable Carbon steel, don't worry about durability and resistance to deformity under heavy loads during jump, slide and impact.
- WITH SHIELDS - As you know it is easy to get dust and soil into the bearing which will slow down the bearing while we are sliding outdoor. Bust Bearing with Shields on both sides will keep contaminants out and save our bearings.
- WIDE APPLICATION - such as skateboards wheels, inline skates, scooters, Longboards, Roller Skates or other skating applications etc
- See more on Amazon...
Brand: Homepal | Manufacturer: Homepal
Dimensions: 0.63 x 0.00 x 0.00 inches | Weight: 0.09 pounds
See On Amazon #19
ezbnb 6 Packs Skateboard Wall Mount Aluminum Skateboard Hanger for Skateboard Deck Display Skateboards Storage Horizontal & Floats Vertically (Screw Holes Version)
Asin: B0B72632FB | Model: Sk2 | PartNumber: Sk2 | Ean: 0670526358512 | UPC: 670526358512
Protective Washer: Included 4 Rubber Washers Per Mount. The Rubber Washer Can Be Placed Between The Surface Of Skateboard Desk And The Nut So That The Nuts Don't Damage The Skateboard..
Easy To Install & Holds The Boards Tight: No Need To Drill Your Valuable Skateboard, Very Simple To Install Just Via One Screw In The Wall..
Made Of Aluminum: The Base Is A Aluminum Material, Durable Enough, Rust-Proof And Will Not Deform..
Black Anodized Aluminum Screw Cap: No Need Tool / Wrench. The Design Of The Screw Cap Rotating Thread Makes It Easy To Twist When Mount Or Dismount Your Skateboards As You Please. Surface Anodic Oxidation Treatment Makes The Color Brighter..
Features
- SKATEBOARD WALL HANGER DISPLAY MOUNT: This skateboard wall mount should work on virtually any skateboard, supreme deck & longboards. You can hang a board Vertically (requires 1 hanger) or horizontally (requires 2 hangers)
- BLACK ANODIZED ALUMINUM SCREW CAP: No need tool / wrench. The design of the screw cap rotating thread makes it easy to twist when mount or dismount your skateboards as you please. Surface anodic oxidation treatment makes the color brighter.
- PROTECTIVE WASHER: Included 4 rubber washers per mount. The rubber washer can be placed between the surface of skateboard desk and the nut so that the nuts don't damage the skateboard.
- MADE OF ALUMINUM: The base is a aluminum material, durable enough, rust-proof and will not deform.
- EASY TO INSTALL & HOLDS THE BOARDS TIGHT: No need to drill your valuable skateboard, very simple to install just via one screw in the wall.
- See more on Amazon...
Brand: ezbnb | Manufacturer: ezbnb
Weight: 0.42 Pounds
Warranty: 2 year
See On Amazon #20
BUIYLV Skateboard Hanger 2PCS Wall Mount Deck Rack for Skateboards Deck Display and Storage
Asin: B09HC4F62F | Model: BUIYLV | PartNumber: BUIYLV
Versatile Usage: Sturdy Wall-Mounted Rack Can Accommodate Most Skateboards And Longboards On The Market And The Rack Is Pliable And Adjustable. Suitable For Display Your Skis, Snowboards, Scooters, Longboards, And More|..
After-Sales Guarantee: Great Wall-Mounted Rack Kit For Multi-Angle Measuring Ruler, Offers More Stability And Convenience While You Are In A Job, If You Have Any Questions, Please Feel Free To Contact Or Qa Us, We Will Try Our Best To Service You..
Widely Application: Transparent Skateboard Display Stand Will Help You Display And Organize All Your Skateboards. It Will Be A Good Decoration And It Can Save Space For Your House, Living Room, Bedroom, Deck,Garage,Shop Office..
Quality Material: The Frame Is Made Of High-Quality Transparent Material Acrylic, With Stainless Steel Screws And Bolts, To Ensure That Your Skateboards Are Displayed Firmly On The Wall.It Provides A Lasting Exhibit Effect For Your Skateboard Deck..
Features
- Contains quantity:1PCS slide frame,3PCS screws, 4PCS nuts,1 PCSexpansion tube,fully packaged wall bracket,display your favorite board art with skateboard on the wall.Your decks appear to be floating off the wall creating a quality aesthetic.
- Quality material: The frame is made of high-quality transparent material acrylic, with stainless steel screws and bolts, to ensure that your skateboards are displayed firmly on the wall.it provides a lasting exhibit effect for your skateboard deck.
- Versatile usage: sturdy wall-mounted rack can accommodate most skateboards and longboards on the market and the rack is pliable and adjustable. Suitable for display your skis, snowboards, scooters, longboards, and more|.
- Widely application: transparent skateboard display stand will help you display and organize all your skateboards. It will be a good decoration and it can save space for your house, living room, bedroom, deck,garage,shop office.
- After-sales guarantee: great wall-mounted rack kit for multi-angle measuring ruler, offers more stability and convenience while you are in a job, if you have any questions, please feel free to contact or QA us, we will try our best to service you.
- See more on Amazon...
Brand: BUIYLV
Weight: 1.00 Pounds
See On Amazon #21
Almencla 2X 50 10mm Long Alloy Bearing Spacer for Scooter Skateboard Inline Skates
Asin: B0D3XZXDB8
-50 Standard 10Mm Best Quality Alloy Spacers.
-High Strength, Abrasion Resistance, Stable, Heat Resistance.
-Keep Bearings Parallel, Improve Rotating Speed And Precision, Reduce Bearing Wear And Tear.
-Fits Push Kick Scooters, Skateboards, Inline Skates, Roller Skates, Roller Derby.
Features
- -Improve skateboard stability and reduce wheel
- -Fits push kick scooters, skateboards, inline skates, roller skates, roller derby
- -50 Standard 10mm best quality alloy spacers
- -Keep bearings parallel, improve rotating speed and precision, reduce bearing wear and tear
- -High strength, abrasion resistance, stable, heat resistance
- See more on Amazon...
Brand: Almencla | Manufacturer: Almencla
See On Amazon #22
Almencla 4X 50 10mm Long Alloy Bearing Spacer for Scooter Skateboard Inline Skates
Asin: B0D3Y3YB51
-Keep Bearings Parallel, Improve Rotating Speed And Precision, Reduce Bearing Wear And Tear.
-Improve Skateboard Stability And Reduce Wheel.
-50 Standard 10Mm Best Quality Alloy Spacers.
-Fits Push Kick Scooters, Skateboards, Inline Skates, Roller Skates, Roller Derby.
Features
- -High strength, abrasion resistance, stable, heat resistance
- -Fits push kick scooters, skateboards, inline skates, roller skates, roller derby
- -Keep bearings parallel, improve rotating speed and precision, reduce bearing wear and tear
- -50 Standard 10mm best quality alloy spacers
- -Improve skateboard stability and reduce wheel
- See more on Amazon...
Brand: Almencla | Manufacturer: Almencla
See On Amazon #23
Almencla 6X 50 10mm Long Alloy Bearing Spacer for Scooter Skateboard Inline Skates
Asin: B0D3Y5T619
-Keep Bearings Parallel, Improve Rotating Speed And Precision, Reduce Bearing Wear And Tear.
-Fits Push Kick Scooters, Skateboards, Inline Skates, Roller Skates, Roller Derby.
-High Strength, Abrasion Resistance, Stable, Heat Resistance.
-Improve Skateboard Stability And Reduce Wheel.
Features
- -50 Standard 10mm best quality alloy spacers
- -Improve skateboard stability and reduce wheel
- -Keep bearings parallel, improve rotating speed and precision, reduce bearing wear and tear
- -High strength, abrasion resistance, stable, heat resistance
- -Fits push kick scooters, skateboards, inline skates, roller skates, roller derby
- See more on Amazon...
Brand: Almencla | Manufacturer: Almencla
See On Amazon #24
Almencla 3X 50 10mm Long Alloy Bearing Spacer for Scooter Skateboard Inline Skates
Asin: B0D3Y5DZR6
-Fits Push Kick Scooters, Skateboards, Inline Skates, Roller Skates, Roller Derby.
-Improve Skateboard Stability And Reduce Wheel.
-High Strength, Abrasion Resistance, Stable, Heat Resistance.
-50 Standard 10Mm Best Quality Alloy Spacers.
Features
- -Keep bearings parallel, improve rotating speed and precision, reduce bearing wear and tear
- -50 Standard 10mm best quality alloy spacers
- -Fits push kick scooters, skateboards, inline skates, roller skates, roller derby
- -High strength, abrasion resistance, stable, heat resistance
- -Improve skateboard stability and reduce wheel
- See more on Amazon...
Brand: Almencla | Manufacturer: Almencla
See On Amazon #25
Bones Wheels David Gravette Salmon Illa Wild Kingdom X-Formula Skateboard Wheels, 55mm, 97A, V6 Wide-Cut
Asin: B0CZSJTPPG | Ean: 0842357189089 | UPC: 842357189089
Formula = X-Formula 97A.
The Amazing New X-Formula (Xf) Is Another Industry Leading Innovation From The Bones Wheels Factory. X-Formula Rolls Over Rough Terrain Like Softer Wheels Do, But Slides Much Like A Harder Wheel Will..
Wheel Shape = V6 Wide-Cut | Wider Contact Patch With Sidecut Walls For Less Drag, Longer Grinds, And Greater Stability.
Durometer/Hardness = 97A.
Features
- Wheel Diameter = 55mm / Wheel Width = 35mm
- Durometer/Hardness = 97A
- Formula = X-Formula 97A
- Wheel Shape = V6 Wide-Cut | Wider Contact Patch with Sidecut Walls for Less Drag, Longer Grinds, and Greater Stability
- The amazing new X-Formula (XF) is another industry leading innovation from the BONES WHEELS factory. X-Formula rolls over rough terrain like softer wheels do, but slides much like a harder wheel will.
- See more on Amazon...
Brand: BONES BEARING | Manufacturer: Skate One Corp.
See On Amazon #26
Ace Trucks MFG Ace Skateboard Trucks AF1 Limited Hollow Deedz 55 (8.5"" Axle) Pair
Asin: B0CXR14GJQ | Ean: 0810125312274 | UPC: 810125312274
Af1 Hollows Feature Hollow Axles And Kingpins. The All-New Ace Af1 Features Game-Changing Performance Without Deviating From The Original Ace Geometry. The Af1 Is Carefully Manufactured Using A Proprietary Casting Process. Years In Development, The Ace Af1 Has A 70% Increase In The Aluminum's Structural Integrity, Making It The Strongest Cast Truck On The Market..
Size 55 Features An 8.5" Axle Width..
Includes 2 Truck.
Didrik Deedz Galasso Af1 Ltd. Features Routed Deedz Logo, High-Gloss Black Basplate And Hanger, Six Speed Rings, White Printed Hanger Artwork, Hollow Kingpins And Axles..
Features
- Introducing Ace Limited, a specially crafted offering with each new design incorporating unique features not found in the rest of the Ace lineup.
- Didrik Deedz Galasso AF1 LTD. Features routed Deedz logo, high-gloss black basplate and hanger, six speed rings, white printed hanger artwork, hollow kingpins and axles.
- AF1 Hollows feature hollow axles and kingpins. The all-new Ace AF1 features game-changing performance without deviating from the original Ace geometry. The AF1 is carefully manufactured using a proprietary casting process. Years in development, the ACE AF1 has a 70% increase in the aluminum's structural integrity, making it the strongest cast truck on the market.
- Includes 2 Truck
- Size 55 features an 8.5 axle width.
- See more on Amazon...
Brand: Ace Trucks MFG | Manufacturer: Ace Trucks MFG
Weight: 32.00 ounces
See On Amazon #27
Wooden Old National Flag Skateboard Grip Tape, Longboards Griptape Anti Slip Scooter Griptape Sand Paper Sheet Sticker 9" x 33"
Asin: B0CYGCPHQL
The Adhesive Surface Of The Sandpaper Is Strong And Not Easy To Fall Off, And It Is Resistant To Tearing And Does Not Drop Sand..
100% Return Guarantee: If You Are Not Satisfied With Our Products, Please Contact Us, We Will Reply You Within 24 Hours And Guarantee 100% Refund..
Diy Style, This Exclusive Cool Skateboard Make You Unique On Any Occasion. Good Choice For Birthday/Christmas/Holiday Gift..
High Quality Material : The Surface Material Is Emery, Back Material Is Pvc. Grainy, Waterproof And Wear Resistant..
Features
- Skateboard grip tape size 9''x33''. Fits all skateboard shapes.
- HIGH QUALITY MATERIAL : The surface material is emery, back material is PVC. Grainy, waterproof and wear resistant.
- The adhesive surface of the sandpaper is strong and not easy to fall off, and it is resistant to tearing and does not drop sand.
- DIY style, this exclusive cool skateboard make you unique on any occasion. Good choice for Birthday/Christmas/Holiday gift.
- 100% Return Guarantee: If you are not satisfied with our products, please contact us, we will reply you within 24 hours and guarantee 100% refund.
- See more on Amazon...
Brand: SUABO | Manufacturer: SUABO
Dimensions: 1.00 x 33.00 x 9.00 Inches
See On Amazon #28
ezbnb Adhesive Skateboard Wall Mount (8-Pack) - No Drilling Skateboard Storage, Minimalist Skateboard Deck Display, Strong Hold Skateboard Hangers for Wall((Transparent Adhesive Version)
Asin: B0CT5CFX52 | Model: SK8 | PartNumber: SK8 | Ean: 0658358553930 | UPC: 658358553930
Room Decor - Arrange The Skateboard Decks However You'd Like To Create A Stylish Deck Display. Uncluttered Your Room Within Minutes With Our Easy-To-Install Skateboard Mount No Drill For Wall..
Minimalist, Low Profile Design - Special Decks, Which Needed Simple Displays, To Highlight The Artwork. Our Skateboard Mount With 2 Black Caps That Don't Cover Any Of The Design On The Board. Included 4 Protective Washers Per Mount That Can Be Placed Between The Surface Of Skateboard Desk And The Nut So That The Nuts Don't Damage The Skateboard..
8 Packs Included - The Package Contains 8 X Adhesive Mounts; 16 X Bolts, 16X Black Bolt Caps; 32X Hex Nuts; 32X Protective Washers.
Perfectly Match - Compatible With Most Common Skateboard With 1.625’’ Truck Holes. No Matter For Old School Decks Or New School Decks, As Long As The Distance Between Two Truck Holes Is 1.625’’ It Can Be Perfectly Matched..
Durable & Strong - This Skateboard Wall Mount Uses Strong Adhesive That Holds Up To 7.2 Pounds, Without Drilling Holes. Caution: Due To Strong Adhesive, Please Place The Mount On A Surface That Does Not Tear. Do Not Use On Wallpaper And Rough Surfaces. Use And Remove Carefully On Drywall And Painted Walls..
Features
- Dual Hanging Method - Our Skateboard Hangers can hang your deck Vertically or Horizontally. Display Vertically of your skateboard with 1 skateboard display wall mount. Display Horizontally of your skateboard with 2 mounts.
- Durable & Strong - This skateboard wall mount uses strong adhesive that holds up to 7.2 pounds, without drilling holes. CAUTION: Due to strong adhesive, please place the mount on a surface that does not tear. Do not use on wallpaper and rough surfaces. Use and remove carefully on drywall and painted walls.
- Room Decor - Arrange the skateboard decks however you'd like to create a stylish deck display. Uncluttered your room within minutes with our easy-to-install skateboard mount no drill for wall.
- Perfectly Match - Compatible with most common skateboard with 1.625 truck holes. No matter for old school decks or new school decks, as long as the distance between two truck holes is 1.625 it can be perfectly matched.
- Minimalist, Low Profile Design - Special decks, which needed simple displays, to highlight the artwork. Our skateboard mount with 2 black caps that don't cover any of the design on the board. Included 4 protective washers per mount that can be placed between the surface of skateboard desk and the nut so that the nuts don't damage the skateboard.
- 8 Packs Included - The package contains 8 x Adhesive mounts; 16 x Bolts, 16x Black bolt caps; 32x Hex nuts; 32x Protective washers
- See more on Amazon...
Brand: ezbnb | Manufacturer: ezbnb
Warranty: 2 year
See On Amazon #29
Deer and American Flag Skateboard Grip Tape, Longboards Griptape Anti Slip Scooter Griptape Sand Paper Sheet Sticker 9" x 33"
Asin: B0CYP5XNZ1
The Adhesive Surface Of The Sandpaper Is Strong And Not Easy To Fall Off, And It Is Resistant To Tearing And Does Not Drop Sand..
100% Return Guarantee: If You Are Not Satisfied With Our Products, Please Contact Us, We Will Reply You Within 24 Hours And Guarantee 100% Refund..
Diy Style, This Exclusive Cool Skateboard Make You Unique On Any Occasion. Good Choice For Birthday/Christmas/Holiday Gift..
High Quality Material : The Surface Material Is Emery, Back Material Is Pvc. Grainy, Waterproof And Wear Resistant..
Features
- Skateboard grip tape size 9''x33''. Fits all skateboard shapes.
- HIGH QUALITY MATERIAL : The surface material is emery, back material is PVC. Grainy, waterproof and wear resistant.
- The adhesive surface of the sandpaper is strong and not easy to fall off, and it is resistant to tearing and does not drop sand.
- DIY style, this exclusive cool skateboard make you unique on any occasion. Good choice for Birthday/Christmas/Holiday gift.
- 100% Return Guarantee: If you are not satisfied with our products, please contact us, we will reply you within 24 hours and guarantee 100% refund.
- See more on Amazon...
Brand: SUABO | Manufacturer: SUABO
Dimensions: 1.00 x 33.00 x 9.00 inches
See On Amazon #30
INDEPENDENT Skateboard Trucks 144 Mid + 52mm Spitfire Burners Wheels, Bones Bearings
Asin: B0CN3LB391 | Ean: 0663320411262 | UPC: 663320411262
Wheels: The Newly Developed Burners Offer A New Tier In Spitfires Line. Using A Unique New Urethane, The Burners Provide An Option For Any Skater Looking For A High-Quality Wheel That’S Great To Ride And Doesn’T Sacrifice Performance For The Price. Poured In The Bighead Shape, 99A Durometer Hardness..
Hardware: Independent 1" Genuine Parts Phillips Head Mounting Hardware, And 1/8" Independent Genuine Parts Riser Pads. Premium Parts To Ensure Maximum Satisfaction. (Everything You Need To Make A Complete Skateboard Except The Deck/Griptape)..
Bearings: Bones Reds Are The Industry Leading Bearings. Skate Rated Clearances, Tolerances, Materials And Lubricant Provide The Best Performance And Durability Possible. Sticker Included In Packaging..
Trucks: New Independent Mid Trucks Feature A Lower Profile Hanger For Optimal Contact Point Angle On Your Nose And Tail For Flip Tricks, Ledges, And All-Around Street Skating. The Best Lightweight Aluminum Alloy Heat Treated To T6 Condition For Strength, Durability, And Grind Feel..
Features
- PACKAGE INCLUDES: Hand selected, top rated brand name components to make a premium skateboared complete. This kit only includes the best parts, no house brand filler! Each component represents the industry leading brand - this is the best an easiest way to complete a professional skateboard! Independent Mid Trucks, Spitfire 99A Burners wheels, Bones Reds Bearings, 1" Independent Hardware, and 1/8" Independent Risers.
- TRUCKS: New Independent Mid trucks feature a lower profile hanger for optimal contact point angle on your nose and tail for flip tricks, ledges, and all-around street skating. The best lightweight aluminum alloy heat treated to T6 condition for strength, durability, and grind feel.
- WHEELS: The newly developed burners offer a new tier in Spitfires line. Using a unique new urethane, the burners provide an option for any skater looking for a high-quality wheel that s great to ride and doesn t sacrifice performance for the price. Poured in the Bighead shape, 99A durometer hardness.
- BEARINGS: Bones Reds are the industry leading bearings. Skate Rated clearances, tolerances, materials and lubricant provide the best performance and durability possible. Sticker included in packaging.
- HARDWARE: Independent 1 genuine parts phillips head mounting hardware, and 1/8 Independent genuine parts riser pads. Premium parts to ensure maximum satisfaction. (everything you need to make a complete skateboard except the deck/griptape).
- See more on Amazon...
Brand: INDEPENDENT | Manufacturer: Independent
Weight: 24.00 ounces
See On Amazon
Looking For Something Else?
Search