Best bass guitar parts - Buying Guide
Last Updated: 05/09/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
Universal Bass Control Knob, Bass Volume Knob with Extension Cable for Car Amplifier
Asin: B0C6DMPS5P | Model: 1 | PartNumber: 1 | Ean: 0720230857662 | UPC: 720230857662
Easy To Install - The Bass Control Knob Is Easy To Install And Use By Plugging The 3-Pin Crystal Connector Into The Sound Interface Of The Subwoofer And The Other End Into The Bass Control Knob..
100% Quality Guarantee - All Of Our Products To Give A Lifetime Of Service. Any Problems Or Needs, Please Feel Free To Contact Us..
High Quality - This Amplifier Remote Control Knob Adopts Pure Copper Core Cable Design And High-Quality Insulated Pvc Protective Wires. Which With Power Light To Indicate The Connection..
Extension Cable - The Bass Control Knob Connector Cable Is Approximately 12.7 Feet. It Is Usually Installed In The Free Position Of The Driver To Provide Easier Control Of The Volume..
Features
- WORKS PERFECTLY - This amplifier bass volume control knob is specially designed to solve the problem of the car audio main control board and subwoofer volume out of sync, so that the music achieves the ultimate effect.
- EXTENSION CABLE - The bass control knob connector cable is approximately 12.7 feet. It is usually installed in the free position of the driver to provide easier control of the volume.
- EASY to INSTALL - the bass control knob is easy to install and use by plugging the 3-pin crystal connector into the sound interface of the subwoofer and the other end into the bass control knob.
- HIGH QUALITY - This amplifier remote control knob adopts pure copper core cable design and high-quality insulated PVC protective wires. Which with power light to indicate the connection.
- 100% QUALITY GUARANTEE - All of our products to give a lifetime of service. Any problems or needs, Please feel free to contact us.
- See more on Amazon...
First Available: 04/04/2023
Brand: EHOPHNA | Manufacturer: EHOPHNA
Dimensions: 1.26 x 7.36 x 5.75 inches
Warranty: 1 year
See On Amazon #2
KAISH Stereo Copper Guitar Bass 1/4" Barrel Jack Cylinder Input Output Jacks with 4 Pins Stereo or Mono Jack Black Nickel
Asin: B0768SPYVR | Model: K839 | PartNumber: K839 | Ean: 0753263401953 | UPC: 753263401953
This Is A Very Good Quality Barrel Jack With 4 Pins,But Not Those Inferior Jacks Made In Cheap Factories.
Package Includes: 1X Barrel Jack.
4 Pins Stereo Jack (The Shorter Two Pins Are Main Conductor Pins); The 4 Pins Are Hardened By Special Technology, Please Do Not Break Them With Fingers; Of Course, You Can Use This Item As Mono Jack As Well.
Length Without Poles: About 39.5Mm; Total Length Including Poles: About 48.5Mm.
Features
- Inside hole diameter: 1/4" (6.35mm); Thread diameter: 11.8mm;
- Length without poles: about 39.5mm; Total length including poles: about 48.5mm
- This is a very good quality Barrel Jack with 4 pins,but not those inferior jacks made in cheap factories
- 4 Pins Stereo Jack (The shorter two pins are main conductor pins); The 4 pins are hardened by special technology, please DO NOT break them with fingers; Of course, you can use this item as Mono Jack as well
- Package includes: 1x Barrel Jack
- See more on Amazon...
Brand: KAISH | Manufacturer: Kaish Music
See On Amazon #3
HGYEDA Bass knob for amp Universal Bass Control Knob, Universal Bass Volume Knob with Extension Cable for Car Amplifier
Asin: B0CYZGTPSN | Model: Universal | PartNumber: Universal | Ean: 0764323095067 | UPC: 764323095067
【Easy To Install】:The Bass Control Knob Is Easy To Install And Use By Plugging The 3-Pin Crystal Connector Into The Sound Interface Of The Subwoofer And The Other End Into The Bass Control Knob..
Includes: Integrated Mounting Slots With Hardware Included For Install.
100% Quality Guarantee-All Of Our Products To Give A Lifetime Of Service.
Compatible With Mtx Amplifier Thunder And Wet Series Monoblock Channel Models: Thunder1000.1, Thunder500.1, And Wet500.1.
【Longer Wires】:The Bass Control Knob Connector Cable Is Approximately 13 Feet. It Is Usually Installed In The Free Position Of The Driver To Provide Easier Control Of The Volume..
Features
- CUSTOMIZE YOUR BASS :External bass control knob provides customizable bass for your optimal sound experience
- Longer wires :The bass control knob connector cable is approximately 13 feet. It is usually installed in the free position of the driver to provide easier control of the volume.
- EASY to INSTALL :the bass control knob is easy to install and use by plugging the 3-pin crystal connector into the sound interface of the subwoofer and the other end into the bass control knob.
- Compatible with MTX amplifier THUNDER and WET series monoblock channel models: THUNDER1000.1, THUNDER500.1, and WET500.1
- INCLUDES: Integrated mounting slots with hardware included for install
- 100% QUALITY GUARANTEE-All of our products to give a lifetime of service
- See more on Amazon...
Brand: HGYEDA | Manufacturer: HGYEDA
Dimensions: 0.20 x 0.20 x 0.20 inches
See On Amazon #4
Dopro Pack of 20 Bass Guitar Pickup Mounting Screws Pickup Springs for Precision P Bass or J Bass or P90 Soap Bar Pickups Black
Asin: B07DLRH36B | Model: 2xK1247-Black-Dopro | PartNumber: 2xK1247-Black-Dopro | Ean: 0753263400697 | UPC: 753263400697
Due To The Wide Variety Of Pickups And Screws In The Market,Please Be Sure To Verify The Dimensions Carefully Before You Order The Item; We Can Not Promise These Screws Would Fit All The Bass Pickups Or P90 Pickups.
Please Note These Are Just After Market Pickup Screws And Springs, So They May Not Be Exact Same With Your Original Screws And Springs,Especially For The Springs! We Only Produce Quality Guitar Parts And Accessoroies, We Don’T Make Inferior Parts Or Accessoroies.
These Screws Are With Short 4.2Mm Diameter Head Which Can Compatible With Most Bass Pickups.
Screws Dimension: 36Mm(Total Length Including Head) X 2.6Mm(Thread Diameter) X 4.2Mm(Head Diameter); Pickup Springs Dimenison: 26Mm(Length) X 4.7Mm(Outer Diameter) X 3.3Mm(Inner Diameter).
Features
- Pickup mounting screws and springs for most bass guitar pickups or P90 pickups
- Screws Dimension: 36mm(total length including head) x 2.6mm(thread diameter) x 4.2mm(head diameter); Pickup Springs Dimenison: 26mm(Length) x 4.7mm(Outer diameter) x 3.3mm(Inner diameter)
- Due to the wide variety of pickups and screws in the market,please be sure to verify the dimensions carefully before you order the item; We can not promise these screws would fit all the bass pickups or P90 Pickups
- These screws are with short 4.2mm diameter head which can compatible with most bass pickups
- Please note these are just after market pickup screws and springs, so they may not be exact same with your original screws and springs,especially for the springs! We only produce quality guitar parts and accessoroies, we don t make inferior parts or accessoroies
- See more on Amazon...
Brand: Dopro | Manufacturer: Dopro
See On Amazon #5
Fender Vintage-Style Bass/Telecaster Bridge/Strap Button Mounting Screws for Electric Guitar, Nickel
Asin: B003AYP9HM | Model: 0015610049 | PartNumber: 0015610049 | Ean: 0717669068813 | UPC: 717669068813
Some Of Our Most Requested Replacement Screws.
Made For Fender And Used On A Variety Of Vintage And Contemporary Models.
Also Used For Strap Button Mounting.
Features
- Package contains twelve nickel, oval head, Phillips, (5 X 1 Inch ) screws used to mount vintage Fender Telecaster and bass bridges
- Also used for strap button mounting
- Some of our most requested replacement screws
- Made for Fender and used on a variety of vintage and contemporary models
- See more on Amazon...
Brand: Fender | Manufacturer: Fender Musical Instruments Corp.
Dimensions: 0.25 x 4.00 x 4.00 inches | Weight: 0.01 pounds
Warranty: 1 year limited.
See On Amazon #6
Seymour Duncan SPB-3 Quarter Pound P-Bass Pickup - High Output Pickup for Classic and Hard Rock, Grunge, Metal, and Punk
Asin: B0002GKYZI | Model: SSPB-3 | PartNumber: SSPB-3 | Ean: 0800315003839 | UPC: 800315003839
High Output Power - Alnico 5 Magnets And High-Output Coil Wind Ensure Maximum Tone, Attitude, And Presence In Every Note. Offers Tremendous Mid-Range Presence And Maximum Output In Any Setting..
Made In The Usa - Hand Built In Our Factory In Santa Barbara, Ca, These Pickups Use Large 1/4" Alnico 5 Bar Magnets, Forbon Flatwork, Black Covers, And Are Vacuum Wax Potted For Squeal-Free Performance..
Easy Replacement - Drop-In Upgrade For Most Standard Precision-Style Basses, Perfectly Crafted For Maximizing Heavy Tones In Live And Studio Settings..
Versatile Performance - Perfect For Heavy Rock, Classic Rock, Punk, Metal, Or Any Style. Install This Drop-In Replacement To Expand Your Bass' Tone For A Variety Of Genres And Styles..
Features
- Massive Tone Upgrade - Seymour Duncan SPB-3 Quarter Pound P-Bass Pickup delivers a fat, punchy sound with an extended frequency range for endless rock tones.
- Versatile Performance - Perfect for heavy rock, classic rock, punk, metal, or any style. Install this drop-in replacement to expand your bass' tone for a variety of genres and styles.
- High Output Power - Alnico 5 magnets and high-output coil wind ensure maximum tone, attitude, and presence in every note. Offers tremendous mid-range presence and maximum output in any setting.
- Easy Replacement - Drop-in upgrade for most standard Precision-style basses, perfectly crafted for maximizing heavy tones in live and studio settings.
- Made in the USA - Hand built in our factory in Santa Barbara, CA, these pickups use large 1/4 alnico 5 bar magnets, Forbon flatwork, black covers, and are vacuum wax potted for squeal-free performance.
- See more on Amazon...
Brand: Seymour Duncan | Manufacturer: Seymour Duncan
Dimensions: 1.35 x 5.80 x 3.25 inches | Weight: 0.06 pounds
See On Amazon #7
SAPHUE PB Bass Wiring Harness Prewired Kit for Precision Bass Guitar Big 250K Pots 1 Volume 1 Tone Jack
Asin: B0C7Z76XNQ | Model: 1 | PartNumber: 1
♫Package Content: This Package Comes 6 Nuts And 3 Gaskets, No Need For Other Mounting Accessory, Easy To Operate..
♫Satisfactory Service: If You Have Any Questions About The Product, Please Contact Us And We Will Reply You Promptly Within 24 Hours..
♫Application: High Quality Prewired Wiring Harness For P Bass Precision Bass Style Bass Guitar..
♫Premium Material: Made Of High Quality Metal And Electron Components, This Guitar Wiring Harness Set Has Excellent Workmanship And Good Texture, It Is Durable And Convenient To Use..
Features
- EASY INSTALL: This wiring harness is completely prewired. What you need to do is solder your guitar pickups to the switch and ground them to the volume pot. It is very easy to install.
- PREMIUM MATERIAL: Made of high quality metal and electron components, this guitar wiring harness set has excellent workmanship and good texture, it is durable and convenient to use.
- PACKAGE CONTENT: This package comes 6 nuts and 3 gaskets, no need for other mounting accessory, easy to operate.
- APPLICATION: High Quality Prewired Wiring Harness for P Bass Precision Bass Style Bass Guitar.
- SATISFACTORY SERVICE: If you have any questions about the product, please contact us and we will reply you promptly within 24 hours.
- See more on Amazon...
Brand: SAPHUE | Manufacturer: SAPHUE
Warranty: 1.
See On Amazon #8
Metallor 4 String Graphite Bass Guitar Nut Pre-Slotted Top Nut Compatible with PB Bass Black 43 x 9 x 6mm Set of 2pcs.
Asin: B0B21B8ZHP | Model: NUGB 01 | PartNumber: NUGB 01
Compatible With Precision Bass Or Similar Bass Guitar. High Quality Genuine Graphite Nut Perfect For Your Guitar Upgrade Or Project..
Nut Has Pre-Cut String Slots And Easy To Install, Package Include: 2 X Graphite Nut, Please Note: Nut May Require Sanding And Shaping For A Perfect Fit And Improved Action..
Graphite Is Self-Lubricating And Is A Perfect Solution For Players Who Use A Lot Of The Tremolo In Their Playing Or Have A Hard Time Keeping The Guitar In Tune. The Self-Lubricating Nature Of Graphite Allows The Strings To Slide Over The Nut With Less Friction, Thus Reducing Tuning Issues And Hang-Ups And Increasing Sustain..
Size: 43Mm X 9Mm X 6Mm(1.69Inch X 0.35Inch X 0.24Inch). String Spacing Is 34Mm(1.34Inch)..
Features
- Real slotted graphite nut replacement, flat bottom, and offer a vast improvement over or many other nut materials. Please note: graphite is not a stone, it is a plastic series, but this material is much harder than plastic, so the sound will be better. If you mind whether it's a plastic, please don't buy it.
- Size: 43mm x 9mm x 6mm(1.69inch x 0.35inch x 0.24inch). String spacing is 34mm(1.34inch).
- Compatible with Precision bass or similar bass guitar. High quality genuine graphite nut perfect for your guitar upgrade or project.
- Graphite is self-lubricating and is a perfect solution for players who use a lot of the tremolo in their playing or have a hard time keeping the guitar in tune. The self-lubricating nature of graphite allows the strings to slide over the nut with less friction, thus reducing tuning issues and hang-ups and increasing sustain.
- Nut has pre-cut string slots and easy to install, Package include: 2 x Graphite nut, Please note: Nut may require sanding and shaping for a perfect fit and improved action.
- See more on Amazon...
Brand: Metallor | Manufacturer: Sunsmile
Dimensions: 0.24 x 1.69 x 0.35 inches | Weight: 0.01 Pounds
See On Amazon #9
Musiclily 2+2 Sealed Bass Guitar Tuning Pegs Keys 2R2L Machine Head Tuners for Precision Bass and Jazz Bass, Black
Asin: B00GGMWD3S | Model: M178-2M179-2 | PartNumber: M178-2M179-2 | Ean: 0700115938976 | UPC: 700115938976
Material:Metal Alloy; Gear Ratio 19:1.
Package Includes:4 X Bass Tuning Pegs ;4 X Ferrules; 4 X Screws(2R2l).
2X2 Tuners Set; Nut,Ferrule,Screws Included.
Fits For Common Size 9/16 Inch(14Mm) Peg Hole.
Features
- Economy sealed bass tuning keys set for Precision Bass or Jazz Bass
- Fits for common size 9/16 inch(14mm) peg hole
- Material:Metal Alloy; Gear Ratio 19:1
- 2x2 Tuners set; Nut,Ferrule,Screws included
- Package Includes:4 x Bass Tuning Pegs ;4 x ferrules; 4 x screws(2R2L)
- See more on Amazon...
Brand: Musiclily | Manufacturer: Musiclily
Dimensions: 0.40 x 5.30 x 4.20 Inches | Weight: 0.53 pounds
See On Amazon #10
MAXCHEER 2R2L Electric Bass Guitar Sealed Tuning Pegs Tuners Machine Heads Tuning Keys/Buttons Guitar Parts Machine Head Tuners for Precision Bass and Jazz Bass (Chrome)
Asin: B09QCRSWQF
Material:Metal Alloy; Gear Ratio 19:1.
Package Includes:4 X Bass Tuning Pegs ;4 X Ferrules; 4 X Screws(2R2l).
2X2 Tuners Set; Nut,Ferrule,Screws Included.
Fits For Common Size 9/16 Inch(14Mm) Peg Hole.
Features
- Economy sealed bass tuning keys set for Precision Bass or Jazz Bass
- Fits for common size 9/16 inch(14mm) peg hole
- Material:Metal Alloy; Gear Ratio 19:1
- 2x2 Tuners set; Nut,Ferrule,Screws included
- Package Includes:4 x Bass Tuning Pegs ;4 x ferrules; 4 x screws(2R2L)
- See more on Amazon...
Brand: MAXCHEER | Manufacturer: MAXCHEER
See On Amazon #11
BQLZR Bass Bone Bridge Saddle and Nut For 4 String Bass Guitar Pack of 3
Asin: B00EQ26DP4 | Model: N01317 | PartNumber: N01317 | Ean: 0700443080064 | UPC: 700443080064
Made Of Bone With A Layer Of Wax On Surface..
This Nut Is A Well Addition To Replace A Tone Robbing/Broken Nut.
Nut Has Pre String Slots And Requires Very Little Experience To Install..
It Looks Like Plastic Material, But Not. Its Density Is Greater Than Plastic Material.
Size: 38*6*9/8.3Mm.
For 4 String Bass Guitar,Eliminate That Fret Buzz..
Features
- High quality Bone nuts Slotted.Even and true craftsmanship.
- For 4 String Bass Guitar,eliminate that fret buzz.
- Made of bone with a layer of wax on surface.
- Size: 38*6*9/8.3mm
- Nut has pre string slots and requires very little experience to install.
- It looks like plastic material, but not. its density is greater than plastic material
- This nut is a well addition to replace a tone robbing/broken nut
- See more on Amazon...
Brand: BQLZR | Manufacturer: BQLZR
Weight: 0.02 pounds
See On Amazon #12
Fender Standard Guitar Neck Plate,Chrome
Asin: B001C74GLY | Model: 0991445100 | PartNumber: 0991445100 | Ean: 0717669512842 | UPC: 717669512842
The Neck Plate Features "Fender Corona, California" Engraved.
Fender Part: 099-1445-100 Genuine Fender 4-Hole Chrome Neckplate With A Tilt Adjustment Hole.
Includes 4 Mounting Screws.
Genuine Fender 4-Hole Chrome Neckplate With A Tilt Adjustment Hole.
Features
- Standard Guitar Neck Plate
- Genuine Fender 4-hole chrome neckplate with a tilt adjustment hole
- The neck plate features Fender Corona, California engraved
- Includes 4 mounting screws
- Fender part: 099-1445-100 Genuine Fender 4-hole chrome neckplate with a tilt adjustment hole
- See more on Amazon...
First Available: 05/28/2012
Brand: Fender | Manufacturer: Fender Musical Instruments Corp.
Dimensions: 3.54 x 11.42 x 7.48 inches | Weight: 0.02 pounds
Warranty: N/a.
See On Amazon #13
DAIERTEK Metal 6.35MM Potentiometer Knob 1/4 Shaft Guitar Pedal Knobs with Set Screw Black Aluminum Control Knob for Electric Guitar Amplifier Effect Pedal -6pcs
Asin: B0CMQFVPXJ
Set Screw - This 6.35Mm Knob Will Also Come With Set Screws And Suitable Allen Wrench For Making The Control Knobs Tight Fit On The Handles..
What You Get - 6 X Knob With Set Screw, 1 X Allen Wrench. Feel Free To Get In Touch With Us About Any Issues..
Application - The Potentiometer Knob Is Suitable For Electric Guitar, Guitar Amp, Effect Pedal, Etc..
6.35Mm Shaft - The Overall Dimension Of This Guitar Amp Knob Is 0.57"X0.75", And The Shaft Hole Size Is 6.35Mm (1/4")..
Features
- Aluminum Made - Black metal guitar pedal knob, with a small slot on top and is filled by oil to prevent the marking from being rubbed out after long time use.
- 6.35MM Shaft - The overall dimension of this guitar amp knob is 0.57x0.75, and the shaft hole size is 6.35MM (1/4).
- Set Screw - This 6.35mm knob will also come with set screws and suitable allen wrench for making the control knobs tight fit on the handles.
- Application - The potentiometer knob is suitable for electric guitar, guitar amp, effect pedal, etc.
- What you get - 6 x Knob with Set Screw, 1 x Allen wrench. Feel free to get in touch with us about any issues.
- See more on Amazon...
Brand: DAIERTEK | Manufacturer: DAIERTEK
Dimensions: 0.75 x 0.75 x 0.75 inches
See On Amazon #14
KIAISH Set of 3 Aged White Brass Insert USA Spec 1/4" Large and Small Knobs Bass Knobs for Jazz J Bass
Asin: B01JRIXWHS | Model: K034+2xK675 | PartNumber: K034+2xK675
1X Small Knob Dimension: 20.2Mm(Base Diameter) X 15(Top Diameter) X 11.5(Height) (Please Confirm The Dimension Carefully Before You Order The Item).
Please Note These Are Not Original Jazz Bass Knobs,So The Dimensions Are A Little Different With Original Jazz Bass Knobs; Please Be Sure To Verify The Dimensions Before You Order The Item.
2X Large Knobs Dimension: 23.4Mm(Base Diameter) X 17.2(Top Diameter) X 15.5(Height) (Please Confirm The Dimension Carefully Before You Order The Item).
Features
- Brass insert with set screw; Fits USA Size 1/4"(6.35mm) diameter Pots
- 2x Large Knobs dimension: 23.4mm(base diameter) x 17.2(top diameter) x 15.5(height) (Please confirm the dimension carefully before you order the item)
- 1x Small Knob dimension: 20.2mm(base diameter) x 15(top diameter) x 11.5(height) (Please confirm the dimension carefully before you order the item)
- Please note these are not original Jazz Bass Knobs,so the dimensions are a little different with original Jazz Bass Knobs; Please be sure to verify the dimensions before you order the item
- See more on Amazon...
Brand: KAISH | Manufacturer: Kaish Music
Weight: 0.05 Pounds
See On Amazon #15
Musiclily Pro 80x18x15mm Self-Adhesive EVA Foam Pickup Height Adjustment Anti-Vibration Foam for Jazz Bass Pickup, Black (Set of 10)
Asin: B0CCS2TQF5 | Model: MX3229BK-10 | PartNumber: MX3229BK-10 | Ean: 0194296026681 | UPC: 194296026681
Material: Eva Foam, Hardness: 38, High Density Compressible, With Self-Adhesive At The Back, Easy To Install.
Package Includes: 10 Pieces Foams.
Dense Foam Mounts Under Pickups To Control Pickup Height Instead Of Using Springs, Has Good Support, Reduce The Vibration And Make The Pickup More Stable.
Length: 80Mm (3-5/32 Inch), Width: 18Mm (45/64 Inch), Height: 15Mm (19/32 Inch).
Features
- Fits Jazz Bass style pickup
- Length: 80mm (3-5/32 inch), width: 18mm (45/64 inch), height: 15mm (19/32 inch)
- Material: EVA foam, hardness: 38, high density compressible, with self-adhesive at the back, easy to install
- Dense foam mounts under pickups to control pickup height instead of using springs, has good support, reduce the vibration and make the pickup more stable
- Package includes: 10 pieces foams
- See more on Amazon...
Brand: Musiclily | Manufacturer: Musiclily
Dimensions: 0.59 x 3.15 x 0.71 inches
See On Amazon #16
4PACKS 50MM Guitar Pickup Piezo Transducer Prewired Amplifier With 6.35MM Output
Asin: B0BS6CY22G | Ean: 0729162971750 | UPC: 729162971750
Installation Instruction:1 Take The Plastic Film Down From The Back Of Transducer To Expose The Adhesive, 2 Place The Transducer Through The Sound Hole To The Lower Part Of The Front Body Where The Guitar Produces The Best Tonal Response,3 Drill A Hole From Inside The Body, Loosen The End-Pin Jack Nut, Insert It To The Hole And Tighten The Nut The Above Procedures Depend On Different Instruments..
Package Included:4 X Disc Piezo Pickup.
This Is A Pre-Wired, Pre-Soldered Piezo And Jack Harness Which Make It Easy For You. All You Have To Do Is To Attach The Piezo In Or On Your Build, Drill A Hole And Mount The Jack. Then You're Done!Fit For Most St Music Instruments Such As Guitar Mandolin Cigar Box Guitar Violin Ukulele Banjo, Etc..
Features
- The sound pickup is high-quality 50mm Piezoelectric ceramic disc transducer,It is very large and can collect a wider range of sound in case you are sure where are the best parts of the sounds.
- This is a pre-wired, pre-soldered piezo and jack harness which make it easy for you. All you have to do is to attach the piezo in or on your build, drill a hole and mount the jack. Then you're done!Fit for most st music instruments such as Guitar Mandolin Cigar box Guitar Violin Ukulele Banjo, etc.
- Installation instruction:1 Take the plastic film down from the back of transducer to expose the adhesive, 2 Place the transducer through the sound hole to the lower part of the front body where the guitar produces the best tonal response,3 Drill a hole from inside the body, loosen the end-pin jack nut, insert it to the hole and tighten the nut The above procedures depend on different instruments.
- Package included:4 x Disc piezo pickup
- See more on Amazon...
Brand: TEAMWILL | Manufacturer: TEAMWILL
See On Amazon #17
KAISH Pack of 20 Bass Guitar Pickup Mounting Screws Pickup Springs for Precision P Bass or J Bass or P90 Soap Bar Pickups Nickel
Asin: B076BK9RY1 | Model: 2xK1247-Nickel | PartNumber: 2xK1247-Nickel | Ean: 0647731180986 | UPC: 647731180986
Due To The Wide Variety Of Pickups And Screws In The Market,Please Be Sure To Verify The Dimensions Carefully Before You Order The Item; We Can Not Promise These Screws Would Fit All The Bass Pickups Or P90 Pickups.
Please Note These Are Just After Market Pickup Screws And Springs, So They May Not Be Exact Same With Your Original Screws And Springs,Especially For The Springs! We Only Produce Quality Guitar Parts And Accessoroies, We Don't Make Inferior Parts Or Accessoroies.
These Screws Are With Short 4.2Mm Diameter Head Which Can Compatible With Most Bass Pickups.
Screws Dimension: 36Mm(Total Length Including Head) X 2.6Mm(Thread Diameter) X 4.2Mm(Head Diameter); Pickup Springs Dimenison: 26Mm(Length) X 4.7Mm(Outer Diameter) X 3.3Mm(Inner Diameter).
Features
- Pickup mounting screws and springs for most bass guitar pickups or P90 pickups
- Screws Dimension: 36mm(total length including head) x 2.6mm(thread diameter) x 4.2mm(head diameter); Pickup Springs Dimenison: 26mm(Length) x 4.7mm(Outer diameter) x 3.3mm(Inner diameter)
- Due to the wide variety of pickups and screws in the market,please be sure to verify the dimensions carefully before you order the item; We can not promise these screws would fit all the bass pickups or P90 Pickups
- These screws are with short 4.2mm diameter head which can compatible with most bass pickups
- Please note these are just after market pickup screws and springs, so they may not be exact same with your original screws and springs,especially for the springs! We only produce quality guitar parts and accessoroies, we don't make inferior parts or accessoroies
- See more on Amazon...
Brand: KAISH | Manufacturer: Kaish Music
See On Amazon #18
IWOMA Full Loaded Guitar Control Plate 4 Way Switch Prewired Loaded Control Plate with Wiring Harness for Jazzes Bass Parts
Asin: B0D3PPJG8J | Ean: 7627590000185
❥Capacitor: Metallized Polypropylene Film Capacitor .068Μf Output Jack: 6.35Mm 1/4" Socket..
❥1Pc X Pre-Wired Switch Control Plate.
❥Chrome Metal Control Plate With 4 Black Plastic Knobs. Vintage Braid Cloth Push-Back Wire 22Awg, Pre-Tinned Wire Is Ready To Solder..
❥Fine-Knurled (24-Spline) Short Split Shaft Pot, B500k And A500k For Tone Control..
Features
- Loaded control plate fit Jazzes J Bass guitar parts replacement. Fully loaded control plate with wiring harness; Everything is pre-assembled for quick and easy installation.
- Fine-knurled (24-spline) short split shaft pot, B500k and A500k for tone control.
- Capacitor: metallized polypropylene film capacitor .068 F Output jack: 6.35mm 1/4 socket.
- Chrome metal control plate with 4 black plastic knobs. Vintage braid cloth push-back wire 22awg, pre-tinned wire is ready to solder.
- 1Pc x Pre-wired Switch Control Plate
- See more on Amazon...
Brand: IWOMA | Manufacturer: IWOMA
See On Amazon #19
Truss Rod Cover Plate, Sturdy Decorative Black Truss Rod Plate for Electric Guitar (GR50)
Asin: B0D3H8XMBD | Model: Genericm7yoxk1bp2-12 | PartNumber: Genericm7yoxk1bp2-12
Including Accessories: The Package Includes A Truss Rod Plate And 3 Screws, Which Can Meet The Needs Of Guitar Repair And Replacement Of The Stem Cover Plate..
Durable Material: The Guitar Truss Rod Plate Is Made Of Durable Plastic Material, Which Has Good Strength And Durability And Can Be Used For A Long Time..
Easy Installation: The Installation Of This Rod Cover Is Very Simple, And Users Can Install And Replace The Rod Cover On Their Own, Making It Convenient For Maintenance And Personalized Adjustment Of The Guitar Appearance..
Stylish Design: Truss Rod Cover Plate Adopts A Stylish Design, Which Is Different From The Traditional Square Cover And Adds The Guitar's Characteristics And Personality..
Features
- LIGHTWEIGHT AND PORTABLE: The cover is light in weight, convenient to carry, which is an important tool for your guitar.
- STYLISH DESIGN: Truss rod cover plate adopts a stylish design, which is different from the traditional square cover and adds the guitar's characteristics and personality.
- INCLUDING ACCESSORIES: The package includes a truss rod plate and 3 screws, which can meet the needs of guitar repair and replacement of the stem cover plate.
- EASY INSTALLATION: The installation of this rod cover is very simple, and users can install and replace the rod cover on their own, making it convenient for maintenance and personalized adjustment of the guitar appearance.
- DURABLE MATERIAL: The guitar truss rod plate is made of durable plastic material, which has good strength and durability and can be used for a long time.
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #20
Electric Guitar Sound Effects Pedal, Upgrade Thickness Mini Electric Guitar Effects Pedal Intuitive Single Tone with Multiple Knobs for Playing (AN 08 Blue)
Asin: B0D3GTDZ13 | Model: Genericg56c47xt90-14 | PartNumber: Genericg56c47xt90-14
Flexible Tuning: The Effect Is Equipped With A Number Of Knobs, Allowing Users To Adjust The Strength, Timbre And Other Parameters Of The Effect To Achieve Personalized Tone Tuning.
Unique And Beautiful Tone: The Effector Can Provide A Typical Beautiful Tone For The Electric Guitar, Enhance The Fullness And Thickness Of The Tone, And Add A Unique Tone Style To The Performance.
Wide Application: This Effect Can Be Adapted To A Wide Range Of Musical Styles And Playing Needs, Whether Rock, Metal Or Jazz, Providing A Wide Range Of Sound Options For Electric Guitars.
Stable And Durable: The Use Of Excellent Metal Materials And Sophisticated Manufacturing Processes Ensure Good Sound Quality And Reliable Performance, While Having A Strong Durability, Suitable For Long Term Use.
Features
- SIMPLE AND EASY TO USE: The effect is simple in design, intuitive in operation, and can be easily achieved without complex setup and debugging
- STABLE AND DURABLE: The use of excellent metal materials and sophisticated manufacturing processes ensure good sound quality and reliable performance, while having a strong durability, suitable for long term use
- FLEXIBLE TUNING: The effect is equipped with a number of knobs, allowing users to adjust the strength, timbre and other parameters of the effect to achieve personalized tone tuning
- WIDE APPLICATION: This effect can be adapted to a wide range of musical styles and playing needs, whether rock, metal or jazz, providing a wide range of sound options for electric guitars
- UNIQUE AND BEAUTIFUL TONE: The effector can provide a typical beautiful tone for the electric guitar, enhance the fullness and thickness of the tone, and add a unique tone style to the performance
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #21
MEELYHOMEZQA 4 String Bass Bridge Electric Bass Guitar Part Tool Bass Bridge Assembly Bass Guitar Bridge Replacement Vintage Style
Asin: B0D3C22CR5 | Ean: 7626930130582
Suitable For Guitar Enthusiasts, Professional Musicians, And Instrument Technicians Looking For Quality Upgrades..
Upgrade Your Guitar Experience With This Multifunctional Bridge Suitable For Various Playing Scenarios..
Perfect For Music Concerts, Studio Recordings, And Personal Practice, Enhancing Sound Quality And Comfort..
Featuring A String Through Body Design, This Bridge Is Firm And Convenient To Adjust For Different Playing Styles..
Features
- Elevating your electric guitar experience with this top loadings or string through body bridge, providing stable support and easy installation.
- Featuring a string through body design, this bridge is firm and convenient to adjust for different playing styles.
- Suitable for guitar enthusiasts, professional musicians, and instrument technicians looking for quality upgrades.
- Perfect for music concerts, studio recordings, and personal practice, enhancing sound quality and comfort.
- Upgrade your guitar experience with this multifunctional bridge suitable for various playing scenarios.
- See more on Amazon...
Brand: MEELYHOME | Manufacturer: hwdjiSW
See On Amazon #22
MEELYHOMEZQA 4 String Bass Bridge Electric Bass Guitar Accessories Bass Bridge Assembly Bass Guitar Bridge Replacement Vintage Style
Asin: B0D3BZLD8S | Ean: 7626930120408
Hardtail Bridge: High Glossiness And Great Performances. Nice Part For Bass Lovers To Them Bass Guitar Bridge..
Bass Saddles Bridge: Great Replacement Bridge Kits For Your Broken, Dirty Or Old Bridge System Of Electric Guitar..
Load Bridge: Constructed With Zinc Alloy, Die-Cast Bridge Unit Ensures Sturdy Structure And Good Sound Qulity..
Bass Bridge: Easy And Quick To Mount. This Kits Includes Saddles Bridge And 5 Mounting Screws For Easy Installation..
Features
- Fixed bridge electric bass: Adjustable saddles for better harmonics. Top-load design for an easy install and easy access.
- Bass bridge: Easy and quick to mount. This kits includes saddles bridge and 5 mounting screws for easy installation.
- Hardtail bridge: High glossiness and great performances. Nice part for bass lovers to them bass guitar bridge.
- Load bridge: Constructed with zinc alloy, die-cast bridge unit ensures sturdy structure and good sound qulity.
- Bass saddles bridge: Great replacement bridge kits for your broken, dirty or old bridge system of electric guitar.
- See more on Amazon...
Brand: MEELYHOME | Manufacturer: hwdjiSW
See On Amazon #23
MEELYHOMEZQA 11 Hole Bass Guitar Pickguard Scratch Plate Self-Adhesive Pickguard Sticker Guard Plate for 4 String Bass Guitar Parts
Asin: B0D3C1YNH3 | Ean: 7626930110225
There Are 2 Layers Thin Protective Film On The Front Outside Of The Pickguard, Peels Off After Installation..
Quality 4Ply Constructions Good Quality Abs Plastic Material..
Aluminum Foil Shield On The Backside, Better Shielding Property And Anti-Interference..
There Is 11 Screw Holes In The Side Of Pickguard, Without Trusses Rod Notches. No Holes For Thumb Rest Or Pickup Cover..
Features
- This pickguard fit 4 string Bass pickguard replacement, will not fits 5-string Precisions Bass guitar.
- There is 11 screw holes in the side of pickguard, without trusses rod notches. No holes for thumb rest or pickup cover.
- There are 2 layers thin protective film on the front outside of the pickguard, peels off after installation.
- Aluminum foil shield on the backside, better shielding property and anti-interference.
- Quality 4ply constructions good quality ABS plastic material.
- See more on Amazon...
Brand: MEELYHOME | Manufacturer: hwdjiSW
See On Amazon #24
MEELYHOMEZQA 4 String Bass Bridge Assembly, 4 String Vintage Style Bass Bridge for 4 Strings Electric Bass Guitar 2 Colors to Choose
Asin: B0D3C28M99 | Ean: 7626930120477
Hardtail Bridge: High Glossiness And Great Performances. Nice Part For Bass Lovers To Them Bass Guitar Bridge..
Bass Saddles Bridge: Great Replacement Bridge Kits For Your Broken, Dirty Or Old Bridge System Of Electric Guitar..
Load Bridge: Constructed With Zinc Alloy, Die-Cast Bridge Unit Ensures Sturdy Structure And Good Sound Qulity..
Fixed Bridge Electric Bass: Adjustable Saddles For Better Harmonics. Top-Load Design For An Easy Install And Easy Access..
Features
- Bass bridge: Easy and quick to mount. This kits includes saddles bridge and 7 mounting screws for easy installation.
- Fixed bridge electric bass: Adjustable saddles for better harmonics. Top-load design for an easy install and easy access.
- Hardtail bridge: High glossiness and great performances. Nice part for bass lovers to them bass guitar bridge.
- Load bridge: Constructed with zinc alloy, die-cast bridge unit ensures sturdy structure and good sound qulity.
- Bass saddles bridge: Great replacement bridge kits for your broken, dirty or old bridge system of electric guitar.
- See more on Amazon...
Brand: MEELYHOME | Manufacturer: hwdjiSW
See On Amazon #25
MEELYHOMEZQA 2Pcs Bass Guitar Pickups, Double Coil 4 Strings Electric Bass Bass Bridge Pickup & Neck with Screw Kits Replacement
Asin: B0D3C1YSQH | Ean: 7626930109656
Easy Install: Set The "Live" Wire To The Pickup Selector And The Ground Wire To Any Piece Of The Tone And Or.
Package: Mounting Screws Are Included In Package, And All The Above Are Packed Into A Box..
High Output: Ceramic Magnet, Vacuum Wax Potted And Sealed, Comes With 2 Connecting Wires. With Strong Magnification..
Great Sound: This Pickup Has Full Tone Color, Stable Sustain Effect, Keeps Sound Clarity..
Features
- Quality: bass pickups in silver with Black frame. Great use for 4 string bass guitar.
- Great Sound: This pickup has full tone color, stable sustain effect, keeps sound clarity.
- Easy Install: Set the live wire to the pickup selector and the ground wire to any piece of the tone and or
- High Output: Ceramic magnet, vacuum wax potted and sealed, Comes with 2 connecting wires. With strong magnification.
- Package: Mounting screws are included in package, and all the above are packed into a box.
- See more on Amazon...
Brand: MEELYHOME | Manufacturer: hwdjiSW
See On Amazon #26
MEELYHOMEZQA 4 String Bass Bridge Electric Bass Guitar Accessories Bass Bridge Assembly Bass Guitar Bridge Replacement Vintage Style
Asin: B0D3C19D9N | Ean: 7626930120392
Hardtail Bridge: High Glossiness And Great Performances. Nice Part For Bass Lovers To Them Bass Guitar Bridge..
Bass Saddles Bridge: Great Replacement Bridge Kits For Your Broken, Dirty Or Old Bridge System Of Electric Guitar..
Load Bridge: Constructed With Zinc Alloy, Die-Cast Bridge Unit Ensures Sturdy Structure And Good Sound Qulity..
Bass Bridge: Easy And Quick To Mount. This Kits Includes Saddles Bridge And 5 Mounting Screws For Easy Installation..
Features
- Fixed bridge electric bass: Adjustable saddles for better harmonics. Top-load design for an easy install and easy access.
- Bass bridge: Easy and quick to mount. This kits includes saddles bridge and 5 mounting screws for easy installation.
- Hardtail bridge: High glossiness and great performances. Nice part for bass lovers to them bass guitar bridge.
- Load bridge: Constructed with zinc alloy, die-cast bridge unit ensures sturdy structure and good sound qulity.
- Bass saddles bridge: Great replacement bridge kits for your broken, dirty or old bridge system of electric guitar.
- See more on Amazon...
Brand: MEELYHOME | Manufacturer: hwdjiSW
See On Amazon #27
Fender Telecaster/Precision Bass Knobs - Knurled Chrome & Telecaster Control Plate
Asin: B0C33BXYPX
Product 1: Fits Most Telecaster And Precision Bass Instruments (Us And Mexico) Manufactured From '51-Present.
Product 2: Electric Guitar Part.
Product 2: Fender Accesories.
Product 2: Tele Original Vnt Control Plt.
Product 1: Chrome.
Product 1: Designed To Fit Most 1/4" Solid Shaft Potentiometers.
Features
- Product 1: Package includes two knurled flat-top knobs and mounting set screws
- Product 1: Designed to fit most 1/4 solid shaft potentiometers
- Product 1: Fits most Telecaster and Precision Bass instruments (US and Mexico) manufactured from '51-Present
- Product 1: Chrome
- Product 2: Fender Accesories
- Product 2: Tele original vnt control plt
- Product 2: Electric Guitar Part
- See more on Amazon...
Brand: Fender
See On Amazon #28
EMG Geezer Butler Signature PJ Bass Guitar Pickup Set + DR Strings Black Beauties Bass Guitar Strings
Asin: B0CBLKDYX6
The Dr Strings Are Medium Gauge, Handmade Black Polymer Coated For Extended String Life..
The Black Beauties Coating Delivers Longevity, More Projection And Articulation..
The Strings Provide Crisp Tone, Clarity And Volume Like Dr's Traditional Handmade Strings..
The Emg Pickup Set Features Alnico 5 Poles, Custom Wound Split-Coils, And Solderless Install System For Vintage Pj Bass Tone..
Features
- Bundle includes EMG Geezer Butler signature passive PJ bass pickup set and DR Strings Black Beauties bass guitar strings.
- The EMG pickup set features Alnico 5 poles, custom wound split-coils, and solderless install system for vintage PJ bass tone.
- The DR Strings are medium gauge, handmade black polymer coated for extended string life.
- The strings provide crisp tone, clarity and volume like DR's traditional handmade strings.
- The black beauties coating delivers longevity, more projection and articulation.
- See more on Amazon...
Brand: EMG
See On Amazon #29
Fender Pure Vintage Precision Bass Ashtray Cover Set & Pure Vintage -Style Jazz Bass/Precision Bass String Guide - Chrome
Asin: B0B8MBLJD4
Product 1: Used On Vintage Precision Bass Guitars.
Product 2: Used On The Majority Of Precision And Jazz Bass Models (Us And Mexico) Manufactured 1951-Present.
Product 2: Chrome.
Product 2: Fender String Guides (String Trees) Help Minimize Tuning Problems And Sympathetic Overtones Caused By Low String Tension.
Product 2: Mounting Hardware Included.
Product 1: Fits Most Vintage Or Modern Precision Bass Guitars; Will Not Fit Left-Hand Or Five-String Models`.
Product 1: Includes Mounting Hardware.
Features
- Product 1: Genuine chrome-plated ashtray-style bridge and pickup covers
- Product 1: Includes mounting hardware
- Product 1: Used on vintage Precision Bass guitars
- Product 1: Fits most vintage or modern Precision Bass guitars; will not fit left-hand or five-string models`
- Product 2: Fender string guides (string trees) help minimize tuning problems and sympathetic overtones caused by low string tension
- Product 2: Mounting hardware included
- Product 2: Used on the majority of Precision and Jazz Bass models (US and Mexico) manufactured 1951-Present
- Product 2: Chrome
- See more on Amazon...
Brand: Fender
See On Amazon #30
Guyker 3Pcs Guitar Potentiometer Control Knobs for 6mm(0.24 ) Dia. Shaft Pots - Knurled Volume and Audio Switch Knob Replacement for Electric Guitar or Precision Bass - Zinc alloy, black
Asin: B0B21X6BN8 | Model: 6mm Potentiometer Control Knobs | PartNumber: 6mm Potentiometer Control Knobs | Ean: 0731694427810 | UPC: 731694427810
Zinc Knobs Are For Sound Equipments Or Rotary Potentiometer, For Protection And Easy Control. The Knobs Have A Knurled Finish Around Their Circumference..
3Pcs Rotary Control Zinc Alloy Knobs..
Designed To Fit Most Tele, Lp, Strat Style Electric Guitar Or Precision Bass Instruments..
Three High-Quality 6Mm Potentiometer Knobs - Zinc Alloy. Durable And Long-Lasting Use..
Features
- The Inner hollow potentiometer shaft diameter is approx. 6 mm (0.24 inch). Outside diameter: approx. 21 mm (0.83 inch); Total height: approx. 14.5 mm (0.57 inch).
- THREE high-quality 6mm potentiometer knobs - zinc alloy. Durable and long-lasting use.
- Zinc knobs are for sound equipments or rotary potentiometer, for protection and easy control. The knobs have a knurled finish around their circumference.
- Designed to fit most Tele, LP, Strat style electric guitar or precision bass instruments.
- 3Pcs rotary control zinc alloy knobs.
- See more on Amazon...
Brand: guyker | Manufacturer: guyker
See On Amazon
Looking For Something Else?
Search