CNC Lathe Milling Chuck, High LoadBearing Capacity ER32 Spring Chuck, for Clamping The Workpiece CNC Lathe
Asin: B0CF6RLM63 | Model: IskiFFrZ8Breqb | PartNumber: IskiFFrZ8Breqb
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Elaborate Production, Has A Long Service Life And With High Cost Performance.
Strict Quality Control And Quality Assurance, High Safety Factor, Can Be Used With Peace Of Mind.
Small Size, Easy To Carry And Store, Easy To Use And With Good Practicality.
A Variety Of Diameter Sizes Are Available For Your Choice To Meet Your Use Requirements.
Features
- High-speed steel chuck with high load-bearing capacity, pressure resistance and explosion resistance
- A variety of diameter sizes are available for your choice to meet your use requirements
- Elaborate production, has a long service life and with high cost performance
- Small size, easy to carry and store, easy to use and with good practicality
- Strict quality control and quality assurance, high safety factor, can be used with peace of mind
- See more on Amazon...
Brand: Estink | Manufacturer: Estink
See On Amazon Similar To CNC Lathe Milling Chuck High
#1
WEN LA164K 5/8-Inch Keyed Drill Chuck with MT2 Arbor Taper.
Asin: B08FBKQPJX | Model: LA164K | PartNumber: LA164K | Ean: 0044459993391 | UPC: 044459993391
Compatible With Any Mt2 Drill Press, Lathe, Or Mill.
Designed For Use With Wen Models 3424, 3424T, 3427, 34018, 34027, 34034, 4214, And 4225.
Installs Easily With The Simple Tap Of A Rubber Mallet.
Easily Open And Close The Three Chuck Jaws Using The Included Key.
Features
- Holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter
- Easily open and close the three chuck jaws using the included key
- Compatible with any MT2 drill press, lathe, or mill
- Installs easily with the simple tap of a rubber mallet
- Designed for use with WEN models 3424, 3424T, 3427, 34018, 34027, 34034, 4214, and 4225
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
See On Amazon #2
VINWOX SCR4-4 Wood Lathe Chuck, 4-Jaw Self-Centering Chuck, with 1"x8TPI thread & 3/4"x16TPI Adapter, 3 Years Warranty
Asin: B088BCMLT7 | Model: SCR4-4 | PartNumber: SCR4-4 | Ean: 0617748908194 | UPC: 617748908194
✅4" Sturdy Steel Body With Electric Plating For Long Term Anti-Rust Performance. Both Sides Of Jaw Teeth And Guides Are Ground And Hardened For Long And Stable Service Life. All Guideways And Bearing Surfaces Are Precisely Machined.
✅Stable Service And Long Life: Vinwox Gear Chuck Made From High Grade K1045 Steel Machined To Allow Closest Tolerances Is With Electric Plating For Long Term Anti-Rust Performance. Both Sides Of Jaw Teeth And Guides Are Ground, All Guideways And Bearing Surfaces Are Precisely Machined For Stable Service And Long Life.
✅Scroll Chuck Perfect For Holding Bowls, Spindles, And Other Unwieldy Wood Lathe Projects. Widely Used For Machine Tools And Accessories For General Lathes And Industrial Machines.
✅Internal Jaws Tighten Around Workpieces Varying From 1-1/2" To 3" (Or 3" Square Block). External Jaws Spread Inside Of Workpieces With Pilot Holes Ranging From 2" To 3-5/8" Included Screw Chuck Provides Even More Options For Supporting Your Projects.
Features
- Products include: Included Chuck body, a set of Tightening Levers, T allen wrench, Screw chuck, adapter converts 1'' x 8TPI to 3/4" x 16TPI and Free Automatic Spring Loaded Center Punch, MAKE SURE check your wood lathe FIT first.
- Internal jaws tighten around workpieces varying from 1-1/2 to 3 (or 3 Square Block). External jaws spread inside of workpieces with pilot holes ranging from 2 to 3-5/8 Included screw chuck provides even more options for supporting your projects
- 4 sturdy steel body with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground and hardened for long and stable service life. All guideways and bearing surfaces are precisely machined
- Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects. Widely used for machine tools and accessories for general lathes and industrial machines
- Stable Service and Long Life: VINWOX Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life
- See more on Amazon...
Brand: VINWOX | Manufacturer: VINWOX
See On Amazon #3
Indexable Lathe Turning Tool 21Pcs Kit 3/8'' 10mm Shank 7Pcs Metal Lathe Tools Holder Set with 14Pcs Turning Inserts for Turning Grooving Threading Boring Carbide Inserts Carbide Turning Tool
Asin: B0BYZJG3BW | Model: 7pcs 3/8'' 10mm Shanks+14pcs Inserts | PartNumber: 7pcs 3/8'' 10mm Shanks+14pcs Inserts | Ean: 0602835344252 | UPC: 602835344252
Achieve Precision Machining: Elevate Your Projects With Our 21Pcs Indexable Lathe Turning Tool Set, 7 Holders And 14 Inserts. Enjoy Seamless, High-Precision Cutting, Whether You're A Pro Or A Diy Enthusiast..
Durable And Customer-Centric: Our Turning Tool Holders Are Shock-Proof, User-Friendly, And Backed By A Satisfaction Guarantee. Achieve Your Machining Goals With Ease, And We're Here To Assist You. We Provide 24H Support, 3Months Refund, 360Days Warranty. Don't Hesitate–Get Yours Now!.
Versatile Inserts For All Materials: Our Carbide Inserts With Cvd Coating Tackle Stainless Steel, Steel, And More. Experience Sturdy, Wear-Resistant, And Smooth Cutting In All Your Projects..
Precision Cutting, Every Angle Covered: With 7 Different Angles, Achieve Perfection Effortlessly. Turn Your Ideas Into Reality With Confidence Using Our Meticulously Designed Tools..
Top-Notch Quality For Endurance: Crafted From Cemented Carbide And Tungsten Steel, Our Turning Holders Offer Superior Hardness And Speed. No More Constant Tool Changes–These Tools Are Built To Last..
All-In-One Machining Solution: We're Your Go-To Universal Toolkit For Precision Turning. Each Package Includes Seven Essential Products: Snr0010k11, S10k-Sclcr06, Ser1010h11, Sdjcr1010h07, Sdncn1010h07, Sclcr1010h06, Mgehr1010-2. No Matter The Project, You'll Have The Right Tool At Your Fingertips..
Features
- Patent Pending Our tool design is innovative and our parent company is currently applying for patent protection. Any unauthorized copying or imitation will be subject to legal sanctions. If any infringement is discovered, we will take all necessary measures to safeguard our rights.
- All-in-One Machining Solution: We're your go-to universal toolkit for precision turning. Each package includes seven essential products: SNR0010K11, S10K-SCLCR06, SER1010H11, SDJCR1010H07, SDNCN1010H07, SCLCR1010H06, MGEHR1010-2. No matter the project, you'll have the right tool at your fingertips.
- Achieve Precision Machining: Elevate your projects with our 21pcs Indexable Lathe Turning Tool Set, 7 holders and 14 inserts. Enjoy seamless, high-precision cutting, whether you're a pro or a DIY enthusiast.
- Top-Notch Quality for Endurance: Crafted from cemented carbide and tungsten steel, our turning holders offer superior hardness and speed. No more constant tool changes these tools are built to last.
- Versatile Inserts for All Materials: Our carbide inserts with CVD coating tackle stainless steel, steel, and more. Experience sturdy, wear-resistant, and smooth cutting in all your projects.
- Precision Cutting, Every Angle Covered: With 7 different angles, achieve perfection effortlessly. Turn your ideas into reality with confidence using our meticulously designed tools.
- Durable and Customer-Centric: Our turning tool holders are shock-proof, user-friendly, and backed by a satisfaction guarantee. Achieve your machining goals with ease, and we're here to assist you. We provide 24h support, 3months refund, 360days warranty. Don't hesitate get yours now!
- See more on Amazon...
Brand: Joogto | Manufacturer: Joogto
Dimensions: 6.50 x 4.50 x 4.00 inches
Warranty: 24h Technical Support/36-Months Warrenty/90-Days Unconditional Refund
See On Amazon #4
Mini Parting Tool Cut off Holder with 6Pcs HSS Blades for Mini Lathes 8mm Shank
Asin: B07KZNCG1C | Model: AAA-240 | PartNumber: AAA-240
Factory Mini Parting Tool Cut Off Holder With 6Pcs Hss Blades For Mini Lathes - 8Mm Shank.
Features
- IDEAL FOR MINI SMALL LATHE RIDGED CLAMPING IS ASSURED BLADE HSS GRADE"
- Factory Mini Parting Tool Cut off Holder with 6Pcs HSS Blades for Mini Lathes - 8mm Shank
- See more on Amazon...
Brand: LEGLO | Manufacturer: LEGLO
See On Amazon #5
VEVOR Mini Lathe Machine, 2.76 in x 6.3 in, 24VDC 96W Mini Wood Lathe Tools Milling Machine Accessories, 7 Speeds 4220/5300/5650/6350/6660/7050/8450 RPM, for DIY Woodworking Wood Drill Rotary Tool
Asin: B0C9J2Z22R | Model: HS001 | PartNumber: HS001 | Ean: 0840349921464 | UPC: 840349921464
Powerful Motor: The Mini Lathe Features A 96W High-Frequency Motor, Delivering A Maximum Speed Of 8500 Rpm, Allowing Users To Easily Perform High-Speed Cutting And Planning, Enhancing Work Efficiency And Processing Quality..
Comprehensive Accessories: A Complete Set Of Rich Accessories Including An Adapter, Power Cord, Allen Wrench, Ball Fixing Pin, Hexagonal Bead Fixing Needle, Sandpaper For Polishing, And More, Embarking On An Endless Journey Of Creative Woodworking..
7-Speed Control: Choose From 7-Speed Options Between 4220 Rpm And 8500 Rpm To Meet Different Cutting Speed Requirements, Thus Achieving Precise Control Over Your Woodworking Projects..
Sturdy & Stable: Featuring A High-Quality Aluminum Alloy Base And A Solid Steel Headstock, Our Mini Lathe Machine Minimizes Vibrations, Ensuring Precise And Stable Operations..
Features
- Lightweight DIY: Compact and portable design with powerful capabilities, our mini wood lathe caters to the needs of home DIY enthusiasts, providing convenient woodworking solutions. Note: This device is suitable for cork turning, please ensure that it does not exceed the rated power for use.
- Sturdy & Stable: Featuring a high-quality aluminum alloy base and a solid steel headstock, our mini lathe machine minimizes vibrations, ensuring precise and stable operations.
- Powerful Motor: The mini lathe features a 96W high-frequency motor, delivering a maximum speed of 8500 RPM, allowing users to easily perform high-speed cutting and planning, enhancing work efficiency and processing quality.
- 7-Speed Control: Choose from 7-speed options between 4220 RPM and 8500 RPM to meet different cutting speed requirements, thus achieving precise control over your woodworking projects.
- Comprehensive Accessories: A complete set of rich accessories including an adapter, power cord, Allen wrench, ball fixing pin, hexagonal bead fixing needle, sandpaper for polishing, and more, embarking on an endless journey of creative woodworking.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 3.15 x 13.78 x 2.36 inches
See On Amazon #6
Genmitsu 15PCS ER11 Precision Spring Collet Set for CNC Engraving Milling Lathe Chuck Tool, 1.0mm-7.0mm & 1/4", 1/8"
Asin: B08K7FDDRR | Model: 15ER11 | PartNumber: 15ER11 | Ean: 0816550024027 | UPC: 816550024027
Material: Made Of Formulated Spring Steel..
Hardened And Precision Ground..
Application: Perfect For Cnc Milling Lathe Tool And Work-Holding Engraving Machine. To Learn More About How To Choose The Right Bits To Meet Your Needs, Please Find The Comparison Chart (Cnc Bits Buying Guide) At The Product Guides And Documents Section Below..
Accuracy: 0.02Mm (0.0008")..
Features
- Gripping Range: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm,4mm, 4.5mm,5mm, 5.5mm, 6mm, 6.5 mm, 7mm, 1/4", 1/8".
- Accuracy: 0.02mm (0.0008).
- Material: Made of formulated spring steel.
- Application: Perfect for CNC milling lathe tool and work-holding engraving machine. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
- Hardened and precision ground.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #7
WEN LA4444 4-Inch 4-Jaw Self-Centering Chuck Set with 1-Inch x 8TPI Thread
Asin: B07PYFNFP3 | Model: LA4444 | PartNumber: LA4444 | Ean: 0044459990925 | UPC: 044459990925
External Jaws Spread Inside Of Workpieces With Pilot Holes Ranging From 2 To 3.2 Inches.
Features A 1” X 8 Tpi Thread For Compatibility With The Majority Of Wood Lathes On The Market.
Included Screw Chuck Provides Even More Options For Supporting Your Projects.
Internal Jaws Tighten Around Workpieces Varying From 1.6 To 2.8 Inches In Size.
Features
- Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects
- Internal jaws tighten around workpieces varying from 1.6 to 2.8 inches in size
- External jaws spread inside of workpieces with pilot holes ranging from 2 to 3.2 inches
- Included screw chuck provides even more options for supporting your projects
- Features a 1 x 8 TPI thread for compatibility with the majority of wood lathes on the market
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
Weight: 0.00 pounds
See On Amazon #8
SENDUO 10PCS 1/4" Metal Lathe Tooling Carbide Tip Tipped Cutter Tool,C6 Bit Cutting Set,for Metal Lathe Turning, Boring, and Chamfering
Asin: B0986T9VXW | Model: 1 | PartNumber: 1
✅ [Included Models]: Ar4-C6 X 2 Pieces,Al4-C6 X 2 Pieces,Br4-C6 X 2 Pieces,Bl4-C6 X 1 Piece,C4-C6 X 1 Piece,E4-C6 X 2 Pieces.
✅ [Application]: These Tools Are A Good Choice For Carbide Lathe Tool Bits, Suitable For General Lathes And Cnc Lathes..
✅ [High Precision]: These Carbide Lathe Tools With Different Angles Can Cut Any Model You Want With High Precision..
Features
- [High quality material]: Made of high quality carbide with good toughness, high hardness, strong wear resistance and durability.
- [High Precision]: These carbide lathe tools with different angles can cut any model you want with high precision.
- [Included models]: AR4-C6 X 2 pieces,AL4-C6 X 2 pieces,BR4-C6 X 2 pieces,BL4-C6 X 1 piece,C4-C6 X 1 piece,E4-C6 X 2 pieces
- [Application]: These tools are a good choice for carbide lathe tool bits, suitable for general lathes and CNC lathes.
- See more on Amazon...
Brand: SENDUO | Manufacturer: SENDUO
Dimensions: 0.78 x 2.76 x 2.16 inches
See On Amazon #9
KingTool 4 Pcs Drill Chuck Set - 1/2-Inch Drill Chuck with Chuck Key with #1 (JT33-MT1) and #2 (JT33-MT2) Morse Taper Arbor
Asin: B08SJBLYH2 | Model: DS-DC-Parent | PartNumber: DS-DC-Parent | Ean: 0672352807615 | UPC: 672352807615
【 Morse Taper Arbor】Two Morse Taper Arbors Mt1-Jt33 And Mt2-Jt33 Are Provided So That The Drill Chuck Can Be Used Interchangeably Between Different Equipments At Any Time. Both Morse Taper Mt1 (#1) And Morse Taper Mt2 (#2) To Jacobs Taper Jt33..
【Perfect Combination】Great For Holding Drill Bits, Small Turnings, Dowels, Pen Mandrel Shafts, And Much More. In Order To Better Help You Choose The Right Bit And Drill Chuck From A Wide Range Of Tools, We Have Combined The Best Products For You, And All The Size Details Of The Products Have Been Shown In The Pictures, So Don't Worry About Buying The Wrong Accessories..
【Jaw Tightening Key】Easily Open And Close The Three Chuck Jaws Using The Jaw Tightening Key.
【Heavy Duty Drill Chuck】Clamping Range: 1/32" - 1/2"; Chuck Overall Length: 3.38In/86Mm,Accuracy: 0.005",Chuck Mount : Jt33. This 3-Jaw Chuck Will Mount Into The Headstock Or Tailstock Of Any Lathe That Accepts Both #1Mt And #2Mt Accessories..
Features
- Woodworking Tool Kits You will have a One-stop Shopping here to buy a drill chuck tool kits Includes 1/32" - 1/2" Drill Chuck(JT33) , Two Mose taper Arbors (JT33-MT1 & JT33-MT2), Jaw Tightening Key
- Heavy Duty Drill Chuck Clamping Range: 1/32 - 1/2; Chuck Overall Length: 3.38in/86mm,Accuracy: 0.005,Chuck Mount : JT33. This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts both #1MT and #2MT accessories.
- Morse Taper Arbor Two Morse Taper Arbors MT1-JT33 and MT2-JT33 are provided so that the Drill Chuck can be used interchangeably between different equipments at any time. Both Morse Taper MT1 (#1) and Morse Taper MT2 (#2) to Jacobs Taper JT33.
- Jaw Tightening Key Easily open and close the three chuck jaws using the Jaw Tightening Key
- Perfect Combination Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more. In order to better help you choose the right bit and drill chuck from a wide range of tools, we have combined the best products for you, and all the size details of the products have been shown in the pictures, so don't worry about buying the wrong accessories.
- See more on Amazon...
Brand: KINGTOOL | Manufacturer: United Innovations
Weight: 2.00 Pounds
See On Amazon #10
PNBO Woodworking Lathe Headstock Spindle Adapter, Converts 1-1/4" x 8TPI to 1" x 8TPI
Asin: B08S7TX99R | Model: 1 | PartNumber: 1 | Ean: 0744337232887 | UPC: 744337232887
✅Convert A 1-1/4" X 8Tpi Lathe Headstock Spindle To 1" X 8Tpi..
✅The Weight Of The Adapter Is 1.34Lb. The Length Is 2.75" And The Width Is 2.1". This Will Extend The Spindle Length By Approximately 1-1/2"..
✅The Adapter Body Is Made Of Hard Steel. Greatly Extend The Service Life..
✅Install The External Thread Of The Chuck: 1" X 8 Tpi..
Features
- Install the internal thread of the spindle: 1 1/4" x 8 TPI.
- Install the external thread of the chuck: 1 x 8 TPI.
- Convert a 1-1/4 x 8TPI lathe headstock spindle to 1 x 8TPI.
- The adapter body is made of hard steel. Greatly extend the service life.
- The weight of the adapter is 1.34LB. The length is 2.75 and the width is 2.1. This will extend the spindle length by approximately 1-1/2.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
See On Amazon #11
WEN 2305-KC Keyless Rotary Tool Chuck
Asin: B072LXHBHP | Model: 2305-KC | PartNumber: 2305-KC | Ean: 0044459230533 | UPC: 044459230533
Accepts Bits Anywhere From 1/32 Of An Inch To 1/8 Of An Inch.
Installs In A Matter Of Second, Simplifying Every Task.
Compatible With The Wen 2305 And 2307 Rotary Tools And The Wen Flex Shaft.
Three-Jaw Chuck Opens And Closes With The Simple Twist Of The Head.
Features
- Change between bits without the aid of any outside tools
- Three-jaw chuck opens and closes with the simple twist of the head
- Accepts bits anywhere from 1/32 of an inch to 1/8 of an inch
- Compatible with the WEN 2305 and 2307 Rotary Tools and the WEN Flex Shaft
- Installs in a matter of second, simplifying every task
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
Dimensions: 0.52 x 0.80 x 0.52 inches | Weight: 0.02 Pounds
See On Amazon #12
WEN LA3421 3.2-Amp 8-Inch by 13-Inch Variable Speed Mini Benchtop Wood Lathe , Black
Asin: B0B6YDYVZD | Model: LA3421 | PartNumber: LA3421 | Ean: 0044459934219 | UPC: 044459934219
Soft-Start 3.2-Amp Motor Starts Gradually To Prevent Damage To The Motor And Maximize Safety.
Includes A 2.3-Inch Face Plate, An Mt1 Spindle And Tailstock Taper, Two Interchangeable Tool Rests, And A Two-Year Warranty.
Adjust The Variable Speed Anywhere From 750 To 3200 Rpm.
Features An 8-Inch Swing Over The Bed And A 13-Inch Distance Between Centers.
Features
- Perfect for turning pens, bowls, cups, chess pieces, and other small workpieces
- Features an 8-inch swing over the bed and a 13-inch distance between centers
- Soft-start 3.2-amp motor starts gradually to prevent damage to the motor and maximize safety
- Adjust the variable speed anywhere from 750 to 3200 RPM
- Includes a 2.3-inch face plate, an MT1 spindle and tailstock taper, two interchangeable tool rests, and a two-year warranty
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
See On Amazon #13
WEN LA162L 5/8-Inch Keyless Drill Chuck with MT2 Arbor Taper
Asin: B08FBJQZC4 | Model: LA162L | PartNumber: LA162L | Ean: 0044459993377 | UPC: 044459993377
Compatible With Any Mt2 Drill Press, Lathe, Or Mill.
Designed For Use With Wen Models 3424, 3424T, 3427, 34018, 34027, And 34034.
Installs Easily With The Simple Tap Of A Rubber Mallet.
Easily Open And Close The Three Chuck Jaws Without Any Tools Or Keys.
Features
- Holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter
- Easily open and close the three chuck jaws without any tools or keys
- Compatible with any MT2 drill press, lathe, or mill
- Installs easily with the simple tap of a rubber mallet
- Designed for use with WEN models 3424, 3424T, 3427, 34018, 34027, and 34034
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
See On Amazon #14
Vevor K72-100 Lathe Chuck 4 Inch 4-Jaw,Lathe Chuck Independent Reversible Jaw,Metal Lathe Chuck Turning Machine Accessories,for Lathes Machine - Amazon.com
Asin: B07JYT47V2 | Model: K72-100 Lathe Chuck | PartNumber: K72-100 Lathe Chuck | Ean: 0601707181766 | UPC: 601707181766
【Enhanced Flexibility】 - The T Chuck Key Of The Lathe Part Allows The Installation Of Various Workpieces. And Easy Operation Reduces Changeover Time For Your Convenience..
【Remarkable Versatility】 - This Chuck Has A Compact Construction. It Is Suitable For Installation On A Metal Lathe Chuck And Clamping Workpieces Of Various Shapes..
【Of High Precision】 - The 4-Jaw Lathe Chuck Works Accurately, Bearing Tolerance Of ≤0.07 Mm (0.003 In) To Ensure Satisfying Metal Processing..
【Reversible Jaw Set】 - The Lathe Chuck Is Equipped With Four Reversible Jaws That Can Be Stepped Inward Or Outward To Hold Raw Materials Of Different Sizes..
Features
- PREMIUM MATERIAL - Diameter: 100 mm (3.93 in). The 4-jaw mini lathe chuck body is made of cast iron that has passed rigorous quality tests. So it is rigid and durable.
- REVERSIBLE JAW SET - The lathe chuck is equipped with four reversible jaws that can be stepped inward or outward to hold raw materials of different sizes.
- ENHANCED FLEXIBILITY - The T chuck key of the lathe part allows the installation of various workpieces. And easy operation reduces changeover time for your convenience.
- OF HIGH PRECISION - The 4-jaw lathe chuck works accurately, bearing tolerance of 0.07 mm (0.003 in) to ensure satisfying metal processing.
- REMARKABLE VERSATILITY - This chuck has a compact construction. It is suitable for installation on a metal lathe chuck and clamping workpieces of various shapes.
- See more on Amazon...
Brand: Vevor | Manufacturer: Mophorn
See On Amazon #15
DEEFIINE Carbide Tip Wood Lathe Turning Tool set With Bowl sander, Lathe Roughing and Finishing Hollowing Tool Interchangeable Aluminum Alloy Handle with 4pcs Carbide Blade For Woodturning
Asin: B0CDRGBBJ1 | Model: WTT060402BS-C | PartNumber: WTT060402BS-C
【Wood Turning Tool Kit】The High-Quality Cnc Machining Made Of Square Stainless Steel Makes It Stronger, Harder And Rolls Less Than Round Shaft Tools. It Has A Square Shaft So That The Knife Can Be Used With A Flat Back. Keep The Shelf Flat And Flush With The Floor。.
【Ergonomic Design】 The Turning Tool Is Equipped With 1Pcs Frosted Handle That Fits Comfortably In The Hand. In Addition, It Is Equipped With An Extension Handle That Can Be Used In Deeper Scenes, Aluminium Oxide Alloy Handles For Grip, Comfort And Durability. Making It A Safe Choice.If You Need More Grip Handles.Please Visit The Deefiine Store,Many Products For You To Choose..
【Rotary Cutter Design】 The Indexable Carbide Tool Blade Can Be Rotated Or Replaced To Provide New Cutting Edge When Needed.If You Need More Carbide Cutters.Please Visit The Deefiine Store,Many Products For You To Choose..
【Sharp And Easy】 Our Carbide Turning Tools Set Can Be Used To Quickly Process Any Workpiece On Your Lathe. The Wood Lathe Tool Set Can Provide A Smooth And Clean Cutting Effect By Four Types Of Cutters Designed For Different Grinding Effects. This Saves A Lot Of Time When Grinding And Honing, Because You Can Easily Replace The Blade When It Becomes Dull..
Features
- New design Our wood turning tools set with bowl sander,Bowl sander is new design product with a patent.
- Sharp and easy Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull.
- wood turning Tool kit The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor
- Rotary cutter design the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed.If you need more carbide cutters.Please visit the DEEFIINE store,many products for you to choose.
- Ergonomic design the turning tool is equipped with 1pcs frosted handle that fits comfortably in the hand. In addition, it is equipped with an extension handle that can be used in deeper scenes, aluminium oxide alloy handles for grip, comfort and durability. making it a safe choice.If you need more grip handles.Please visit the DEEFIINE store,many products for you to choose.
- See more on Amazon...
Brand: DEEFIINE | Manufacturer: DEEFIINE
Dimensions: 9.00 x 14.60 x 2.80 inches
See On Amazon #16
Diraeen 35Pcs Tungsten Carbide Cutters Inserts Set,Lathe Tools for Wood Lathe Turning Tools,Supplied with Screws and Screwdriver
Asin: B0C56QRJTB | Model: 35PCS | PartNumber: 35PCS
【3 Screwdrivers And 16 Screws】 The Tungsten Cutting Tool Blade Comes With Multiple Screwdrivers And Screws. Fully Equipped And Easy To Replace.
【High-Quality After-Sales Service】If You Are Not Satisfied With The Product At Any Time Within 1 Years After Purchase, We Will Provide A Refund Or Replacement. Package Included: 4*Square (11 X 11 Mm), 4*Diamond (30 X 10 Mm), 4* Round (Diameter 12 X 2.5 Mm) , 4*Round (Diameter 8.9 X 1.85 Mm), 16* Screws, 3*Screwdriver.
【Fits For Wood Lathe Turning Tools】This Combination Carbide Insert Kit Works Perfectly With Our Wood Lathe Turning Tools Kit.Meet The Requirements Of Rough Machining And Finishing Combination.
【Solid Tungsten Steel】All Of The Carbide Lathe Tools Replacement Inserts Are Made Of Quality Solid Tungsten Steel. Super Sharp And Durable, Long Lasting And Reliable, Hard To Break Or Deform, Providing You With Nice Use Experiences For A Long Time.
Features
- Carbide Lathe Tools Replacement Tips with Screws and Screwdriver Fits For Most Size 11 mm Square with Radius, 12 mm and 8.9 mm Round, 30 x 10 mm Diamond
- Solid Tungsten Steel All of the carbide lathe tools replacement inserts are made of quality solid tungsten steel. Super sharp and durable, long lasting and reliable, hard to break or deform, providing you with nice use experiences for a long time
- 3 screwdrivers and 16 screws The tungsten cutting tool blade comes with multiple screwdrivers and screws. Fully equipped and easy to replace
- Fits for wood lathe turning tools This combination carbide insert kit works perfectly with our wood lathe turning tools kit.Meet the requirements of rough machining and finishing combination
- High-quality after-sales service If you are not satisfied with the product at any time within 1 years after purchase, we will provide a refund or replacement. Package included: 4*Square (11 x 11 mm), 4*Diamond (30 x 10 mm), 4* Round (diameter 12 x 2.5 mm) , 4*Round (diameter 8.9 x 1.85 mm), 16* Screws, 3*Screwdriver
- See more on Amazon...
Brand: Diraeen | Manufacturer: DIRAEEN
See On Amazon #17
ER11 Spring Collet Nut Set - AAA Level High Precision ER11 1/8'' Collet + ER11 1/4'' Collet + ER11 Clamping Nut for CNC Engraving Mechine/Lathe Milling Tool
Asin: B0BRG2Y8LV | Model: QH987F | PartNumber: QH987F | Ean: 0725683261325 | UPC: 725683261325
High Precision: Collet Precision Is Aaa Level And Less Than 0.008Mm,Used For Milling, Boring, Drilling, Wire Tapping And Other Operations.
Application : Er11 Collet Nut Set Is Widely Used In Cnc, Milling Machines, Engraving Machines, Machining Centers And Other Equipment.
Materials: Collet Are Made Of 65Mn Spring Steel,With High Precision,High Elasticity, Tight Clamping And Stable Cutting.
Features
- Product name: ER11 collet nut set, includes 1/8 inch collet, 1/4 inch collet and clamping nut
- Materials: Collet are made of 65Mn spring steel,with high precision,high elasticity, tight clamping and stable cutting
- High precision: Collet precision is AAA level and less than 0.008mm,used for milling, boring, drilling, wire tapping and other operations
- Application : ER11 collet nut set is widely used in CNC, milling machines, engraving machines, machining centers and other equipment
- See more on Amazon...
Brand: Luo ke | Manufacturer: Luo ke
See On Amazon #18
SILIVN 14pcs ER20 Spring Collet Set for CNC Engraving Machine and Milling Lathe Tool Workholding Engraving Collets (1/16",3/32",1/8",5/32",3/16",7/32",1/4",9/32",5/16",11/32",3/8",13/32",7/16",1/2")
Asin: B07DBWXTGS | Model: ER20 | PartNumber: ER20
Premium Quality - These Spring Collet Sets Are Made Of High Quality Spring Steel. They Are Stable And Practical In Performance..
100% Satisfaction Service: Our Customer-Centric Approach Ensures 12-Month Satisfaction Customer Service. So, If You Have Any Issues With Our Products, Our Dedicated Customer Service Team Is Always Ready To Help You With A Smile!.
Easy To Differentiate - Each Collet Is Individually Labeled And Packaged, Making It Easy To Quickly Differentiate Between Them. This Ensures Hassle-Free Access To The Right Tool For The Job..
Wide Application - Er20 Collet Set Is Suitable For Boring, Milling, Drilling, Tapping, Engraving, Cnc, Spindle Machines, And Other Processing.
Features
- Versatile collet size - The ER20 spring collet set contains these size: 1/16",3/32",1/8",5/32",3/16",7/32"1/4",9/32",5/16",11/32",3/8",13/32",7/16",1/2"
- Wide application - ER20 collet set is suitable for boring, milling, drilling, tapping, engraving, CNC, spindle machines, and other processing
- Premium Quality - These spring collet sets are made of high quality spring steel. They are stable and practical in performance.
- Easy To differentiate - Each collet is individually labeled and packaged, making it easy to quickly differentiate between them. This ensures hassle-free access to the right tool for the job.
- 100% Satisfaction Service: Our customer-centric approach ensures 12-month satisfaction customer service. So, if you have any issues with our products, our dedicated customer service team is always ready to help you with a smile!
- See more on Amazon...
Brand: SILIVN | Manufacturer: SILIVN
See On Amazon #19
Earl Diamond Super Heavy Duty Drill Chuck 5/8" Capacity with R8 Shank Precision Integrated & Chuck Jaw Tightening Key (R8-B18)
Asin: B081SSSLPV | Ean: 0034948681748 | UPC: 034948681748
R8 Shank: Suitable For Drill Presses Or Lathes Spindle Accepts R8 Shank..
Component: Chuck Jaw Tightening Key..
Maximum T. I. R. Does Not Exceed,Accuracy: 0.005"..
Clamping Range: 3-16Mm (1/8"~5/8")..
Features
- Material: 40CR, Hardness HRC60.
- Clamping Range: 3-16mm (1/8~5/8).
- R8 Shank: Suitable for drill presses or lathes spindle accepts R8 shank.
- Maximum T. I. R. does not exceed,accuracy: 0.005.
- Component: Chuck jaw tightening key.
- See more on Amazon...
Brand: Earl Diamond | Manufacturer: Earl Diamond
Dimensions: 3.55 x 4.65 x 2.33 inches
See On Amazon #20
WEN LA136K 1/2-Inch Keyed Drill Chuck with MT1 Arbor Taper
Asin: B08FBJB2XK | Model: LA136K | PartNumber: LA136K | Ean: 0044459993384 | UPC: 044459993384
Compatible With Any Mt1 Drill Press, Lathe, Or Mill.
Designed For Use With The Wen 3420T And 3421 Wood Lathe.
Installs Easily With The Simple Tap Of A Rubber Mallet.
Easily Open And Close The Three Chuck Jaws Using The Included Key.
Features
- Holds drill bits, pen mandrel shafts, and workpieces up to 1/2 inch in diameter
- Easily open and close the three chuck jaws using the included key
- Compatible with any MT1 drill press, lathe, or mill
- Installs easily with the simple tap of a rubber mallet
- Designed for use with the WEN 3420T and 3421 Wood Lathe
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
See On Amazon
Looking For Something Else?
Search