BELOMI Oxygen Sensor Sockets, 7/8 inch (22mm) Wire Gate Accesses Sensor from Side, Premium Drive Offset Oxygen Sensor Socket Universal for Most Models of Cars, Preventing Damage to Wires
Asin: B0C5MMY5S1
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Easy To Store And Carry】: This Oxygen Sensor Sleeve With Compact And Not Heavy, Can Be Easily Placed In Various Places Of Your Car And Does Not Take Up Space For Emergency. You Can Also Store It Well When You Are Not Using It, And Take It Out When You Want To Use It..
【Why You Need】: Oxygen Sensors Are Vital, Oxygen Sensors Constantly Test The Ratio Of Fuel To Oxygen When Your Fuel Is Burned, Keeping This Ratio In A Healthy Balance Is Vital To The Long Term Health Of Your Engine. If You Are Not Clear About The Internal Parts Of Your Car, This Tool Won't Take You Too Long To Understand, It Helps Replace Your Oxygen Sensor Directly..
【Compatibility】: The Common 6-Point, 7/8" (22Mm) Socket Fits Most Oxygen Sensors And Is Compatible With Oxygen Sensors In Almost All Modern Vehicles. Great For Helping You Remove And Install With Oxygen Sensors On Your Engine..
【Careful Design】: Our Sockets Are Designed With A Standard 6-Point Slotted Design That Allows You To Remove The Oxygen Sensor With The Harness Still Attached. And The Sockets Are Offset And Compact, Allowing For Extra Leverage Even In Hard-To-Reach Places. Side Cutouts Prevent Damage To The Wires And Permanently Etched Dimensional Markings For Your Convenience..
Features
- Sturdy Materials : This offset oxygen sensor socket is made of high quality chrome vanadium steel for strength and durability to withstand years of strenuous use and to continue to be used. It ends up being very good at assisting mechanics to complete their tasks quickly and efficiently.
- Careful Design : Our sockets are designed with a standard 6-point slotted design that allows you to remove the oxygen sensor with the harness still attached. And the sockets are offset and compact, allowing for extra leverage even in hard-to-reach places. Side cutouts prevent damage to the wires and permanently etched dimensional markings for your convenience.
- Easy to Store and Carry : This oxygen sensor sleeve with compact and not heavy, can be easily placed in various places of your car and does not take up space for emergency. You can also store it well when you are not using it, and take it out when you want to use it.
- Compatibility : The common 6-point, 7/8 (22mm) socket fits most oxygen sensors and is compatible with oxygen sensors in almost all modern vehicles. Great for helping you remove and install with oxygen sensors on your engine.
- Why You Need : Oxygen sensors are vital, oxygen sensors constantly test the ratio of fuel to oxygen when your fuel is burned, keeping this ratio in a healthy balance is vital to the long term health of your engine. If you are not clear about the internal parts of your car, this tool won't take you too long to understand, it helps replace your oxygen sensor directly.
- See more on Amazon...
Brand: BELOMI | Manufacturer: BELOMI
Dimensions: 0.30 x 1.00 x 0.30 inches
See On Amazon Similar To BELOMI Oxygen Sensor Sockets 7
#1
Offset Oxygen Sensor Socket, 3/8-Inch Drive, 7/8-Inch (22mm), Wire Gate Accesses Sensor from Side, Preventing Damage to Wires, Universal for Most Cars
Asin: B0BBLNG7MW
Features: 7/8" (22Mm) Socket Fits Most Oxygen Sensors, Works With Any 3/8" Drive Ratchet Or Breaker Lever, Offset Drive Gate With Wire Links The Sensor From The Side To Prevent Damage To The Wires..
What You Get: 1 X Offset Oxygen Sensor Socket. This Product Is Sure To Meet Your Requirements. If You Have Any Questions, Please Contact Us In Time, We Will Reply You Within 24 Hours..
Function: This Oxygen Sensor Is Very Convenient To Use, The Sensor Is In The Harshest Environments And May Need To Remove Some Elbow Grease, This Quality Tool Will Save You Time! To Help Your Car's Emissions And Fuel Consumption..
Design: The Socket Has A Slotted Design. So You Remove The Oxygen Sensor With The Harness Still Connected. This 3/8" Drive Oxygen Sensor Socket Is Also Offset And Compact, Providing Extra Leverage Even In Hard-To-Reach Locations..
Features
- PREMIUM QUALITY: Made of premium chrome molybdenum steel, this socket allows the user to apply maximum torque to ensure precise assembly and function. The tool meets and exceeds ANSI/ASME standards.
- DESIGN: The socket has a slotted design. So you remove the oxygen sensor with the harness still connected. This 3/8 drive oxygen sensor socket is also offset and compact, providing extra leverage even in hard-to-reach locations.
- FEATURES: 7/8 (22mm) socket fits most oxygen sensors, works with any 3/8 drive ratchet or breaker lever, offset drive gate with wire links the sensor from the side to prevent damage to the wires.
- FUNCTION: This oxygen sensor is very convenient to use, the sensor is in the harshest environments and may need to remove some elbow grease, this quality tool will save you time! to help your car's emissions and fuel consumption.
- WHAT YOU GET: 1 x Offset Oxygen Sensor Socket. This product is sure to meet your requirements. If you have any questions, please contact us in time, we will reply you within 24 hours.
- See more on Amazon...
Brand: YOGEIER | Manufacturer: YOGEIER
Dimensions: 3.94 x 3.94 x 3.94 inches
See On Amazon #2
Oxygen Sensor Socket with Side Wire Cutout 3/8 Inch Drive x 7/8 (22mm) fits All Vehicle O2 Removal and Installation Offset Oxygen Sensor Socket
Asin: B07RLVDR7T | Model: 13 | PartNumber: 13
Design- The Size Of The Open Side Is 8 Mm, The Length: 80Mm, Side Cutout Prevents Damage To Wires.
Warranty: We Offer 30 Days Free Return And 365 Days Free Warranty. Please Feel Free To Let Us Know If You Need Any Assists..
100% Brand New And Never Used. This Part Is Guarantee By Factory Warranty.
Size- Fits Standard Oxygen Sensors With A 7/8” Hexagon Nut; 7Mm Slot, 7/8” (22Mm) X 6-Point X 3-1/10” (80Mm) Length, 3/8 Inch Square Drive For Use With Ratchet..
Features
- Quality- Constructed with drop forged heat-treated chrome-vanadium steel (CR-V) for strength and longevity; Black phosphate finish for corrosion resistance.
- Size- Fits standard oxygen sensors with a 7/8 hexagon nut; 7mm slot, 7/8 (22mm) x 6-point x 3-1/10 (80mm) length, 3/8 inch square drive for use with ratchet.
- Design- The size of the open side is 8 mm, the length: 80mm, Side cutout prevents damage to wires
- 100% Brand new and Never used. This part Is guarantee By Factory Warranty
- Warranty: We offer 30 days free return and 365 days free warranty. Please feel free to let us know if you need any assists.
- See more on Amazon...
Brand: Apeixoto | Manufacturer: Apeixoto
See On Amazon #3
A ABIGAIL 5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool
Asin: B07KT1GR7V
【Package】1-Pc 3/8” Dr. Extra Deep Broach Socket (3-1/8” Long), 1-Pc 3/8” Dr. Low-Profile Crowfoot Socket Wrench (1-1/4” Long), 1-Pc 1/2” Dr. Offset Crowfoot Socket Wrench (1-15/16” Long), 1-Pc M18 X 1.5Mm And 1-Pc M12 X 1.25Mm Thread Chasers With 3/8” Drive To Clean And Repair Damaged Threads.
【Service】100% Satisfaction Guarantee, If You Have Any Issues With The Oxygen Sensor Socket Wrench And Thread Chaser Set, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund. Our Aim Is To Make You Satisfy The Parts And The Service We Provide For You..
【Material】 Made From High Performance Chrome Molybdenum And Solid Cast Steel Construction For Strength And Durability - Finished With Black Oxide To Prevent Rust..
【Use】 Built For Use With Ratchets And Breakers Bars To Remove And Install Oxygen Sensors And Hex Vacuum Switches On Vehicle, Even If You Don't Have A Lot Of Experience Working With Cars. This High Quality Tool Can Save Your Time!.
Features
- Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
- USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
- Package 1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads
- Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.
- Service 100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
- See more on Amazon...
Brand: A ABIGAIL | Manufacturer: A ABIGAIL
See On Amazon #4
GOHAWKTEQ Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set 5Pcs
Asin: B082M4LL6K
Material: These Sockets And Wrenches Are Forged With High Quality Steel And Gain A High Strength Which Give Them A Better Performance..
Warranty: We Offer 30 Days And 365 Days Free Replacement Warranty..
Design: Special Side Cutout Design Allows Easy Access To Oxygen Sensor From Section And Prevents From Demage To Wire..
Package: There Are 5Pcs Sockets And Wrenches Included In The Red Case, 1-Pc 3/8” Dr. Extra Deep Broach Socket (3-1/8” Long), 1-Pc 3/8” Dr. Low-Profile Crowfoot Socket Wrench (1-1/4” Long), 1-Pc 1/2” Dr. Offset Crowfoot Socket Wrench (1-15/16” Long), 1-Pc M18 X 1.5Mm And 1-Pc M12 X 1.25Mm Thread Chasers With 3/8” Drive To Clean And Repair Damaged Threads.
Features
- Usage: This tool sets are used to remove. Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines.
- Package: There are 5pcs sockets and wrenches included in the red case, 1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads
- Material: These sockets and wrenches are forged with high quality steel and gain a high strength which give them a better performance.
- Design: Special side cutout design allows easy access to oxygen sensor from section and prevents from demage to wire.
- Warranty: We offer 30 days and 365 days free replacement warranty.
- See more on Amazon...
Brand: GOHAWKTEQ | Manufacturer: GOHAWKTEQ
See On Amazon #5
o2 sensor socket 7/8 o2 sensor socket 3/8-Inch Drive by 7/8-Inch (22 mm) Offset Oxygen Sensor Socket-Universal
Asin: B08CKVBF9P | Model: A7822F-1 | PartNumber: A7822F-1
【Material】Our Oxygen Sensor Removal Tool Is Made From High Performance Chrome Molybdenum And Solid Cast Steel Construction For Strength And Durability - Finished With Black Oxide To Prevent Rust..
【Service】 100% Satisfaction Guarantee, If You Have Any Issues With The 02 Sensor Socket, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund. Our Aim Is To Make You Satisfy The Parts And The Service We Provide For You..
【Use】This Oxygen Sensor Wrench Is Built For Use With Ratchets And Breakers Bars To Remove And Install Oxygen Sensors And Hex Vacuum Switches On Vehicle, Even If You Don't Have A Lot Of Experience Working With Cars. This High Quality Tool Can Save Your Time!.
【Design】O2 Sensor Tool Standard 6 Point With Low Profile And Slotted Design To Enable You Remove Oxygen Sensors With The Wiring Harness Still Attached, And The Socket Is Offset And Compact Which Allows Extra Leverage Even In Hard To Reach Spots..
Features
- Size This oxygen sensor socket is 7/8 inch (22 millimeter) hex fits almost all oxygen sensors. 3/8 inch square drive for use with ratchet.
- Design O2 Sensor Tool Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
- Material Our Oxygen Sensor Removal Tool is made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.
- USE This oxygen Sensor Wrench is built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
- Service 100% satisfaction guarantee, If you have any issues with the 02 sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
- See more on Amazon...
Brand: A ABIGAIL | Manufacturer: A ABIGAIL
See On Amazon #6
TEKTON 3/8 Inch Drive x 7/8 Inch Offset 6-Point Oxygen Sensor Socket | 47749, Original Version
Asin: B00GMN4D1Q | Model: 47749 | PartNumber: 47749 | Ean: 0020209477496 | UPC: 020209477496
Offset Drive With Wire Gate Accesses Sensor From The Side, Not The Top, Preventing Damage To Wires.
High-Performance Chrome Molybdenum Steel Construction.
High-Contrast, Permanent, Laser Etched Size Markings Are Easy-To-Read, Even In Low Light.
Use With Any 3/8 Inch Drive Ratchet Or Breaker Bar.
Common 6 Point, 7/8 In. (22Mm) Socket Fits Most Oxygen Sensors.
Features
- Removes and installs oxygen sensors on vehicles with computer-controlled engines
- Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors
- Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires
- Use with any 3/8 inch drive ratchet or breaker bar
- High-performance chrome molybdenum steel construction
- High-contrast, permanent, laser etched size markings are easy-to-read, even in low light
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 1.20 x 2.20 x 1.40 Inches | Weight: 0.34 pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #7
1 Pcs Offset Oxygen Sensor Socket 3/8-Inch Drive by 7/8-Inch 22mm Wire Gate Accesses Sensor from Side, Preventing Damage to Wires, Universal for Most Models of Cars Oxygen Sensor Offset Puller
Asin: B0922QJYK8 | Model: YCT02059 | PartNumber: YCT02059 | Ean: 0711731960258 | UPC: 711731960258
This Socket Made From Premium Chrome Molybdenum Steel, The Socket Allows Users To Exert Maximum Torque While The Precision Casting Ensures Accurate Fit And Function..
Thank You!.
Even If You Don't Have A Lot Of Experience Working With Cars, You Can Replace Your O2 Sensor With This Tool To Help With Your Car's Emissions And Gas Mileage. The Sensors Live In The Harshest Of Environments And May Require Some Elbow Grease To Remove, But This Quality Tool Can Save Your Knuckles And Save You Time!.
The Socket Is Slotted So That You Can Remove The Oxygen Sensor While Still Connected To The Wiring Harness, And The Socket Is Offset And Compact, Providing Additional Leverage Even In Hard-To-Reach Spots. This Quality Tool Can Save Your Knuckles And Time！.
Features
- Common 6 point, 7/8 in (22mm) socket, suitable for most oxygen sensors. Use with any 3/8 inch drive ratchet or breaker bar. It s very handy.
- The socket is slotted so that you can remove the oxygen sensor while still connected to the wiring harness, and the socket is offset and compact, providing additional leverage even in hard-to-reach spots. This quality tool can save your knuckles and time
- This socket made from premium Chrome Molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures accurate fit and function.
- Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this quality tool can save your knuckles and save you time!
- Thank you!
- See more on Amazon...
Brand: YCT | Manufacturer: YCT AUTO
See On Amazon #8
ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover tool and Thread Chaser Set
Asin: B07P24HCY1 | Model: 13 | PartNumber: 13 | Ean: 0607111538424 | UPC: 607111538424
6-Point 7/8” (22Mm) Socket Opening Fits All Hexagon Oxygen Sensor, Common 3/8” And 1/2” Drive Ends Can Be Used With Ratchet Or Breaker Bar.
Set Including: 1-Pc 3/8” Dr. Extra Deep Broach Socket (3-1/8” Long), 1-Pc 3/8” Dr. Low-Profile Crowfoot Socket Wrench (1-1/4” Long), 1-Pc 1/2” Dr. Offset Crowfoot Socket Wrench (1-15/16” Long), 1-Pc M18 X 1.5Mm And 1-Pc M12 X 1.25Mm Thread Chasers With 3/8” Drive To Clean And Repair Damaged Threads.
Special Side Cutout Design Allows Easy Access To Oxygen Sensors From Any Section And Prevents Damage To Wires.
3 Types Of Universal Socket Wrenchs Cover Various Situations Of Oxygen Sensor Location.
Features
- Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines
- 3 types of universal socket wrenchs cover various situations of oxygen sensor location
- 6-point 7/8 (22mm) socket opening fits all hexagon oxygen sensor, common 3/8 and 1/2 drive ends can be used with ratchet or breaker bar
- Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires
- Set Including: 1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 0.87 x 3.15 x 0.87 inches | Weight: 1.81 pounds
See On Amazon #9
7PCS Oxygen Sensor Socket 22mm (7/8 in), 27mm, 29mm fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool
Asin: B07QGCS1B7
【Design】Standard 6 Point With Low Profile And 8Mm X 64Mm Side Cutout Design To Enable You Remove Oxygen Sensors With The Wiring Harness Still Attached, And The Socket Is Offset And Compact Which Allows Extra Leverage Even In Hard To Reach Spots..
【Service】100% Satisfaction Guarantee, If You Have Any Issues With The Oxygen Sensor Socket, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund. Our Aim Is To Make You Satisfy The Parts And The Service We Provide For You..
【Use】 Built For Use With 3/8” Ratchets, 1” Wrenches, And Breakers Bars To Remove And Install Oxygen Sensors And Hex Vacuum Switches On Vehicle, Even If You Don't Have A Lot Of Experience Working With Cars. This High Quality Tool Can Save Your Time!.
【Size】 7Mm Slot, 7/8” (22Mm) X 6-Point X 3-1/10” (80Mm) Length, 3/8 Inch Square Drive For Use With Ratchet. Fits All Standard Oxygen Sensors With A 7/8” Hexagon Nut..
Features
- High Qulity Made of high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust and corrosion.
- Size 7mm slot, 7/8 (22mm) x 6-point x 3-1/10 (80mm) length, 3/8 inch square drive for use with ratchet. Fits all standard oxygen sensors with a 7/8 hexagon nut.
- Design Standard 6 point with low profile and 8mm x 64mm side cutout design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
- USE Built for use with 3/8 ratchets, 1 wrenches, and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
- Service 100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
- See more on Amazon...
Brand: A ABIGAIL | Manufacturer: A ABIGAIL
See On Amazon #10
ARES 70039-3/8-Inch Drive by 7/8-Inch (22mm) Offset Oxygen Sensor Socket - Wire Gate Accesses Sensor from Side, Preventing Damage to Wires
Asin: B01C4OB3XC | Model: ARES 70039 | PartNumber: ARES 70039 | Ean: 0635983559520, 0818765021402 | UPC: 818765021402
Why You Need It: Even If You Don't Have A Lot Of Experience Working With Cars, You Can Replace Your O2 Sensor With This Tool To Help With Your Car's Emissions And Gas Mileage. The Sensors Live In The Harshest Of Environments And May Require Some Elbow Grease To Remove, But This Oxygen Sensor Socket Can Save Your Knuckles And Save You Time!.
Aspca Business Ambassador: We Are Proud To Be Part Of The Aspca Business Ambassador Program. If You Have A Pet, You Realize They Are More Than A Pet, They Are Part Of The Family. With Your Support, We're Proud To Help This Great Organization..
Reliable | Effective | Efficient: Users Trust Ares To Be Quality Tools. You Are Backed By Our Performance Assurance Limited Lifetime Warranty. If You Have Any Issues With Your Ares Offset Oxygen Sensor Socket, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund..
Quality: Made From Premium Chrome Molybdenum Steel, The Oxygen Sensor Socket Allows Users To Exert Maximum Torque While The Precision Casting Ensures Accurate Fit And Function. This Tool Meets And Exceeds Ansi/Asme Standards. Ares Offers A Full Line Of Oxygen Sensor Tools Including Our Complete 70318 Oxygen Sensor Socket Set That Features Thread Chasers, Oxygen Sensor Sockets And More!.
Features
- DESIGN: This socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached. The 6-point beveled nose of this 7/8-Inch (22mm) socket fits oxygen sensors on a wide variety of vehicles. This 3/8-inch drive oxygen sensor socket is also offset and compact which allows for extra leverage even in hard to reach spots. For added leverage, you can use it with your 3/8-inch breaker bar or ratchet.
- QUALITY: Made from premium Chrome Molybdenum steel, the oxygen sensor socket allows users to exert maximum torque while the precision casting ensures accurate fit and function. This tool meets and exceeds ANSI/ASME standards. ARES offers a full line of Oxygen Sensor tools including our complete 70318 Oxygen Sensor Socket set that features thread chasers, oxygen sensor sockets and more!
- WHY YOU NEED IT: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this oxygen sensor socket can save your knuckles and save you time!
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Offset Oxygen Sensor Socket, simply contact customer service for troubleshooting help, parts, replacement, or refund.
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we're proud to help this great organization.
- See more on Amazon...
Brand: ARES | Manufacturer: ARES
Dimensions: 1.00 x 5.80 x 2.71 inches | Weight: 0.35 pounds
Warranty: Performance Assurance Limited Lifetime Warranty
See On Amazon #11
TEKTON 3/8 Inch Drive x 7/8 Inch 6-Point Oxygen Sensor Socket | 4929
Asin: B000NPUKIE | Model: 4929 | PartNumber: 4929 | Ean: 0020209049297 | UPC: 020209049297
Side Cutout Prevents Damage To Wires.
Constructed From Drop Forged, Heat Treated, Chrome Vanadium Steel.
High-Contrast, Permanent, Laser Etched Size Markings Are Easy-To-Read, Even In Low Light.
Use With Any 3/8 In. Drive Ratchet Or Breaker Bar.
Common 6 Point, 7/8 In. (22Mm) Socket Fits Most Oxygen Sensors.
Features
- Removes and installs oxygen sensors on vehicles with computer-controlled engines
- Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors
- Side cutout prevents damage to wires
- Use with any 3/8 in. drive ratchet or breaker bar
- Constructed from drop forged, heat treated, chrome vanadium steel
- High-contrast, permanent, laser etched size markings are easy-to-read, even in low light
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 2.00 x 5.75 x 1.75 inches | Weight: 0.55 Pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #12
BELOMI Oxygen Sensor Socket with Side Wire Cutout, 3/8 Inch Drive x 0.39 Inch (12mm) 6-Point fits All Vehicle O2 Removal and Installation, 65 Mn Steel Universal Puller Oxygen Sensor Socket (Large)
Asin: B0CCNQPS5W | Model: Oxygen Sensor Socket | PartNumber: Oxygen Sensor Socket
【Use】: Our Oxygen Sensor Socket Is Used For Removing And Installing Oxygen Sensors And Hexagonal Vacuum Switches On Cars, It Can Be Used With Ratchet Wrenches And Disconnecting Pliers, Suitable For O2 Removal And Installation On All Vehicles, Very Easy To Use, And It Can Provide Great Convenience For You..
【Service】: You Can Buy With Confidence. Made Of Selected Materials And Careful Craftsmanship, It Is The Ideal Oxygen Sensor Removal Tool. The Goods Are Strictly Inspected Before Shipment, There Are No Errors In Specifications Or Functionality, Provides You With An Excellent Using Experience..
【Design】: Standard 6-Point Slotted Design With Side Cutout To Prevent Wire Damage, Allowing You To Remove The Oxygen Sensor While Still Connecting The Wiring Harness. The Socket Is Biased To Be Compact, Providing Extra Leverage Even In Hard-To-Reach Places..
【Compatible】: Universal 6-Point 7/8 Inch (22Mm) Socket, Hexagonal Shape, Fits Almost All Oxygen Sensors With 7/8" Hex Nuts, 3/8 Inch Square Head At The Top, Can Be Used With Ratchet Wrench. Please Check The Specification Size Before You Purchase..
Features
- Material : Made of high quality 65 manganese steel, hard texture, high strength and excellent durability, will not easily deformed or broken. The black oxidized surface treatment effectively prevents rust and corrosion, can adapt to various working environments and weather conditions, long service life.
- Compatible : Universal 6-point 7/8 inch (22mm) socket, hexagonal shape, fits almost all oxygen sensors with 7/8 hex nuts, 3/8 inch square head at the top, can be used with ratchet wrench. Please check the specification size before you purchase.
- Use : Our oxygen sensor socket is used for removing and installing oxygen sensors and hexagonal vacuum switches on cars, it can be used with ratchet wrenches and disconnecting pliers, suitable for O2 removal and installation on all vehicles, very easy to use, and it can provide great convenience for you.
- Design : Standard 6-point slotted design with side cutout to prevent wire damage, allowing you to remove the oxygen sensor while still connecting the wiring harness. The socket is biased to be compact, providing extra leverage even in hard-to-reach places.
- Service : You can buy with confidence. Made of selected materials and careful craftsmanship, it is the ideal oxygen sensor removal tool. The goods are strictly inspected before shipment, there are no errors in specifications or functionality, provides you with an excellent using experience.
- See more on Amazon...
Brand: BELOMI | Manufacturer: BELOMI
Dimensions: 1.00 x 0.50 x 0.50 Inches
Warranty: 0.2
See On Amazon #13
ARES 70318-10-Piece Oxygen Sensor Socket Set - Set Includes Thread Chasers, Oxygen Sensor Sockets, an Injector Socket and Oil Sending Unit Sockets - High Strength Chrome Vanadium Steel
Asin: B073WHGNZ3 | Ean: 0818765026704 | UPC: 818765026704
Storage: This Oxygen Sensor Socket Set Comes Complete With Convenient Storage Case So You'll Never Misplace A Socket On The Job Again!.
Aspca Business Ambassador: We Are Proud To Be Part Of The Aspca Business Ambassador Program. If You Have A Pet, You Realize They Are More Than A Pet, They Are Part Of The Family. With Your Support, Weâ€Re Proud To Help This Great Organization.".
Reliable | Effective | Efficient: Users Trust Ares To Be Quality Tools. You Are Backed By Our Performance Assurance Limited Lifetime Warranty. If You Have Any Issues With Your Ares Oxygen Sensor Socket Set, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund.".
Quality: All Tools In This 10-Piece Oxygen Sensor Socket Set Are Constructed Of High Strength Chrome Vanadium Steel With A Manganese Phosphate Coating To Resist Corrosion.".
Features
- INCLUDES: This set includes a 29mm 1/2-inch drive Vacuum Switch Socket, 27mm 1/2-inch drive Injector Socket, 27mm 3/8-inch drive Oil Sender Unit 1-inch Socket, 22mm 3/8-inch drive Vacuum Switch Socket, 22mm 1/2-inch drive Heated O2 Sensor Socket, 27mm 3/8-inch drive Oil Sender Unit 1-1/16-inch Socket, 22mm 3/8-inch drive 6-Pt Offset O2 Sensor Wrench, M12 x 1.25mm and M18 x 1.5mm O2 Sensor Rethread Tools, and a 22mm 1/2-inch Drive Deep Offset O2 Sensor Socket."
- QUALITY: All tools in this 10-piece Oxygen Sensor Socket Set are constructed of high strength Chrome Vanadium Steel with a Manganese Phosphate coating to resist corrosion.
- STORAGE: This Oxygen Sensor Socket set comes complete with convenient storage case so you'll never misplace a socket on the job again!
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Oxygen Sensor Socket Set, simply contact customer service for troubleshooting help, parts, replacement, or refund.
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we re proud to help this great organization.
- See more on Amazon...
Brand: ARES | Manufacturer: ARES
Warranty: Performance Assurance Limited Lifetime Warranty
See On Amazon #14
KEDAKEJI Oxygen Sensor Socket with Side Wire Cutout 3/8-Inch Drive by 7/8-Inch fits All Vehicle O2 Removal and Installation Offset Oxygen Sensor Socket(22 mm)
Asin: B09WZR7JC4 | Model: K1023T-2 | PartNumber: K1023T-2
High Quality: Made Of High-Quality Chromium-Molybdenum Steel, The Sleeve Allows The User To Apply Maximum Torque, While Precision Casting Ensures Accurate Fit And Function, Strength And Durability-Black Oxide Surface Treatment To Prevent Rust..
Warranty: This Oxygen Sensor Socket Will Come With 30 Days Hassle-Free Return & 1 Year Unlimited Replacement Promise. If You Don't Like It, Just Return It And Get A Full Refund, All We Wanna Do Is To Make You Love Kedakeji Products..
Using: Built For Use With Ratchets And Breakers Bars To Remove And Install Oxygen Sensors And Hex Vacuum Switches On Vehicle, Even If You Don't Have A Lot Of Experience Working With Cars. This High Quality Tool Can Save Your Time!.
Size: Kedakeji 7/8 Inch (22 Millimeter) Common 6 Point, Hex Fits Almost All Oxygen Sensors, 3/8 Inch Square Drive For Use With Ratchet..
Features
- Design: The standard 6-point slotted design allows you to remove the oxygen sensor while still connecting the wiring harness, and the socket is biased and compact, providing extra leverage even in hard-to-reach places, very convenient, please rest assured use.
- Size: KEDAKEJI 7/8 inch (22 millimeter) Common 6 point, hex fits almost all oxygen sensors, 3/8 inch square drive for use with ratchet.
- High Quality: Made of high-quality chromium-molybdenum steel, the sleeve allows the user to apply maximum torque, while precision casting ensures accurate fit and function, strength and durability-black oxide surface treatment to prevent rust.
- Using: Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
- Warranty: This oxygen sensor socket will come with 30 days HASSLE-FREE RETURN & 1 year UNLIMITED REPLACEMENT PROMISE. If you don't like it, just return it and get a full refund, All we wanna do is to make you love KEDAKEJI products.
- See more on Amazon...
Brand: KEDAKEJI | Manufacturer: KEDAKEJI
See On Amazon #15
T2278F 3/8-Inch Drive by 7/8-Inch (22 mm) Offset Oxygen Sensor Socket
Asin: B07FFLV7T3
♦ Design: This Socket's Slotted Design Allows You To Remove Oxygen Sensors With The Wiring Harness Still Attached, And The Unique Off Set Design Of The T7822f Oxygen Sensor Wrench Delivers Maximum Torque With Maximum Convenience! Made To Increase Torque On Hard-To-Remove O2 Sensors And Allows You To Access Tough Spots, Easily!.
♦ Warranty: 100% Satisfaction Guarantee, As With All Of Our Products, You Are Covered. If You Don't Like It, Just Return It And Get A Full Refund. All We Wanna Do Is To Make You Satisfy The Wrench And The Service We Provide For You..
♦Using: Even If You Don't Have A Lot Of Experience Working With Cars, You Can Replace Your O2 Sensor With This Tool To Help With Your Car's Emissions And Gas Mileage. The Sensors Live In The Harshest Of Environments And May Require Some Elbow Grease To Remove, But This Quality Tool Can Save Your Knuckles And Save You Time!.
♦ Quality: T2278f Oxygen Sensor Wrench Is A Heavy-Duty Tool Which Is Made From Premium Chrome Molybdenum Steel, The Socket Allows Users To Exert Maximum Torque While The Precision Casting Ensures Accurate Fit And Function..
Features
- Size: Common 6 point, 7/8 inch (22 millimeter) hex fits almost all oxygen sensors; 3/8" drive for ratchets.
- Quality: T2278F Oxygen Sensor Wrench is a heavy-duty tool which is made from premium Chrome Molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures accurate fit and function.
- Design: This socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached, and the unique off set design of the T7822F Oxygen Sensor Wrench delivers maximum torque with maximum convenience! Made to increase torque on hard-to-remove O2 sensors and allows you to access tough spots, easily!
- Using: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this quality tool can save your knuckles and save you time!
- Warranty: 100% Satisfaction Guarantee, As with all of our products, you are covered. If you don't like it, just return it and get a full refund. All we wanna do is to make you satisfy the wrench and the service we provide for you.
- See more on Amazon...
Brand: TOPSCOPE | Manufacturer: THEBIGDEALS
Dimensions: 0.79 x 1.18 x 0.79 Inches
See On Amazon #16
DAYUAN 10Pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Removal Kit
Asin: B07V36G9MY | Ean: 0793345497795 | UPC: 793345497795
Built To Last: Constructed Of Heat-Treated Chrome Vanadium Steel, This Oxygen Sensor Remover Set Is Built For Strength, Durability, And Longevity; Each 02 Sensor Socket Is Coated With A Black Oxide Finish To Provide Resistance To Rust And Corrosion.
Convenient Storage: The Plastic Blow-Molded Case Is Included To Provide Safe Storage, Fast Organization, And Easy Transportation; Case Measures At 11.8 X 9.8 X 2.5 Inches (29.9 X 24.9 X 6.3 Cm) And Features Locking Latches And A Comfortable Handle.
Contents: This Specialty Tools Set Includes 10 Pieces: 1/2 Inch Dr X 22Mm X 6Pt X 110Mm, 1/2 Inch Dr X 29Mm X 6Pt X 90Mm, 1/2 Inch Dr X 22Mm X 12Pt X 78Mm, 1/2 Inch Dr X 27Mm X 12Pt X 78Mm, 1/2 Inch Dr X 28Mm X 12Pt X 78Mm, 1/2 Inch Dr X 7/8” X 50Mm, 3/8 Inch Dr X 7/8” X 6Pt X 80Mm, 3/8 Inch Dr X 7/8” X 6Pt X 90Mm, 3/8 Inch Dr X 7/8” X 30Mm, And 3/8 Inch Dr X 1” And 1-1/6” X 74Mm.
Use With Your Tools: Features 3/8-Inch Or 1/2-Inch Square Drive To Fit Your O2 Sensor Wrench Drives; For Use With Ratchet, Breaker Bar, Or Hand Wrench (Driver Tools Not Included); Not Compatible With Impact Tools; Use This Tool In Conjunction With The O2 Sensor Thread Chasers To Install New Sensors Easily (Thread Chaser And Sensors Not Included).
Features
- REMOVE OXYGEN SENSORS FROM YOUR VEHICLE: This 10 Piece Specialty Sockets O2 Sensor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches; Some O2 socket pieces feature cutout sides to prevent damage to wires and tubes; Remove and install parts on most domestic and some international vehicles
- USE WITH YOUR TOOLS: Features 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives; For use with ratchet, breaker bar, or hand wrench (driver tools not included); Not compatible with impact tools; Use this tool in conjunction with the O2 Sensor Thread Chasers to install new sensors easily (thread chaser and sensors not included)
- BUILT TO LAST: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity; Each 02 sensor socket is coated with a black oxide finish to provide resistance to rust and corrosion
- CONTENTS: This specialty tools set includes 10 pieces: 1/2 inch dr x 22mm x 6PT x 110mm, 1/2 inch dr x 29mm x 6PT x 90mm, 1/2 inch dr x 22mm x 12PT x 78mm, 1/2 inch dr x 27mm x 12PT x 78mm, 1/2 inch dr x 28mm x 12PT x 78mm, 1/2 inch dr x 7/8 x 50mm, 3/8 inch dr x 7/8 x 6PT x 80mm, 3/8 inch dr x 7/8 x 6PT x 90mm, 3/8 inch dr x 7/8 x 30mm, and 3/8 inch dr x 1 and 1-1/6 x 74mm
- CONVENIENT STORAGE: The plastic blow-molded case is included to provide safe storage, fast organization, and easy transportation; Case measures at 11.8 x 9.8 x 2.5 inches (29.9 x 24.9 x 6.3 cm) and features locking latches and a comfortable handle
- See more on Amazon...
Brand: DAYUAN | Manufacturer: Yinyuan tools
See On Amazon #17
Oxygen Sensor Socket with Side Wire Cutout 3/8 Inch Drive x 7/8 (22mm) fits All Vehicle O2 Removal and Installation Offset Oxygen Sensor Socket
Asin: B09Z27F7BF | Model: A772223F-BT | PartNumber: A772223F-BT
【Material】 Made From High Performance Chrome Molybdenum And Solid Cast Steel Construction For Strength And Durability - Finished With Black Oxide To Prevent Rust..
【Service】 100% Satisfaction Guarantee, If You Have Any Issues With The Oxygen Sensor Socket, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund. Our Aim Is To Make You Satisfy The Parts And The Service We Provide For You..
【Use】 Built For Use With Ratchets And Breakers Bars To Remove And Install Oxygen Sensors And Hex Vacuum Switches On Vehicle, Even If You Don't Have A Lot Of Experience Working With Cars. This High Quality Tool Can Save Your Time!.
【Design】 Standard 6 Point With Low Profile And Slotted Design To Enable You Remove Oxygen Sensors With The Wiring Harness Still Attached, And The Socket Is Offset And Compact Which Allows Extra Leverage Even In Hard To Reach Spots..
Features
- Size 7/8 inch (22 millimeter) hex fits almost all oxygen sensors. 3/8 inch square drive for use with ratchet.
- Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
- Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.
- USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
- Service 100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
- See more on Amazon...
Brand: A ABIGAIL | Manufacturer: A ABIGAIL
Warranty: 1 Year
See On Amazon #18
DASBET 7pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set
Asin: B07227LX26 | Model: Z0057 | PartNumber: Z0057 | Ean: 0687925995620 | UPC: 687925995620
>>【Easy Operation】The Slotted Design Of The The Oxygen Sensor Wrench Allows You To Remove Oxygen Sensors With The Wiring Still Attached, While The Offset Wrenches Allow For Extra Leverage With Your Breaker Bar Or Ratchet Even In Hard-To-Reach Spots; The Precision Forged Slotting Gives You Maximum Torque With Minimum Effort..
>>【7Pcs Oil Pressure Sensor Socket Wrench Set】1" , 1-1/6", 1-3/16" Oil Pressure Sending Unit Socket; 1-1/16" Gm Thermal Switch Socket; 7/8" Short Low Profile O2 Oxygen Sensor Socket; 7/8" Universal Oxygen Sensor Socket; 7/8" Universal Vacuum Switch Pvs; Tvs Socket Tool..
>>【Wide Application】Perfect For Removal And Installation Of Oxygen Sensors, Oil Pressure Sending Units, Diesel Injectors, Vacuum Switches, And Thermal Sensor Switches..
>>【Design】Standard 6 Point With Low Profile And Side Cutout Design To Enable You Remove Oxygen Sensors With The Wiring Harness Still Attached, And The Socket Is Offset And Compact Which Allows Extra Leverage Even In Hard To Reach Spots. Large Engraved Sizes On Each Piece Offer Quick Identification..
Features
- >> Premium Quality This oxygen sensor socket set is made of high performance chrome molybdenum and solid cast steel construction for strength and durability. Black oxide coating on the surface to prevent rust and corrosion.
- >> Design Standard 6 point with low profile and side cutout design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots. Large engraved sizes on each piece offer quick identification.
- >> Easy Operation The slotted design of the the oxygen sensor wrench allows you to remove oxygen sensors with the wiring still attached, while the offset wrenches allow for extra leverage with your breaker bar or ratchet even in hard-to-reach spots; the precision forged slotting gives you maximum torque with minimum effort.
- >> Wide Application Perfect for removal and installation of oxygen sensors, oil pressure sending units, diesel injectors, vacuum switches, and thermal sensor switches.
- >> 7PCS Oil Pressure Sensor Socket Wrench Set 1 , 1-1/6, 1-3/16 Oil Pressure Sending Unit Socket; 1-1/16 GM Thermal Switch Socket; 7/8 Short low Profile O2 Oxygen Sensor Socket; 7/8 Universal Oxygen Sensor Socket; 7/8 Universal Vacuum Switch PVS; TVS Socket Tool.
- See more on Amazon...
Brand: DASBET | Manufacturer: DASBET
See On Amazon #19
Oxygen Sensor Socket, 3/8-Inch Drive x 7/8 (22mm) O2 Sensor Socket with Side Wire Cutout, Preventing Damage to Wires, Fit All Vehicle O2 Removal and Installation
Asin: B0CJ26FJ9W
【Easy To Use】Even If You Don't Have A Lot Of Driving Experience, You Can Replace Your Oxygen Sensor ,Inspecting, Replacing And Installing This High Quality Tool Will Not Only Save You Time But Also Do Exactly What You Want..
【Service】 If You Have Any Questions About The Product, Simply Contact Customer Service You Can Contact Us By Email, We Will Solve You As Soon As Possible..
【Products Include】1Pcs Offset Oxygen Sensor Socket,This High Quality Tool Can Save You Time! , Can Meet Your Daily Needs, Suitable For Oxygen Sensors Found On Most Modern Vehicles.
【Design】The Size Of The Open Side Is 8 Mm, 3/8” Inch Drive X 7/8” (22Mm) –Fits All Vehicle O2 Removal And Installation To Remove, Prevent Damage To The Wires, Very Convenient, Please Rest Assured Use..
Features
- High Quality Material Oxygen sensor socket Made of high-quality heat-treated chrome-vanadium steel for strength and longevity,the precision casting ensures accurate fit and function, black phosphate finish for corrosion resistance.
- Design The size of the open side is 8 mm, 3/8 Inch Drive x 7/8 (22mm) Fits All Vehicle O2 Removal and Installation to remove, prevent damage to the wires, very convenient, please rest assured use.
- Easy To Use Even if you don't have a lot of driving experience, you can replace your oxygen sensor ,inspecting, replacing and installing this high quality tool will not only save you time but also do exactly what you want.
- Products Include 1Pcs offset oxygen sensor socket,this high quality tool can save you time! , can meet your daily needs, suitable for oxygen sensors found on most modern vehicles
- Service If you have any questions about the product, simply contact customer service you can contact us by email, we will solve you as soon as possible.
- See more on Amazon...
Brand: stymart | Manufacturer: stymart
See On Amazon #20
DURATECH O2 Oxygen Sensor Socket 3/8" Drive x 7/8"(22mm), Cr-V Oxygen Sensor Remover Tool with Side Wire Gate, O2 Removal and Installation Universal Sensor Socket
Asin: B0CF8M9DJ3 | Ean: 0820909796688 | UPC: 820909796688
Side Wire Gate: The O2 Sensor Removal Tool Is Designed With A Side Wire Gate. It Is Wide Enough To Pass Through The Wire Without Damaging It. This Kind Of Design Allows You To Remove The Oxygen Sensor While Still Connecting The Wire Harness, Which Is Both Convenient And Safe..
Wide Application: This O2 Sensor Remover Is Suitable For Most Cars, You Can Use It To Disassemble, Replace And Clean The Car Oxygen Sensor To Help Reduce Your Car's Emissions And Fuel Consumption. (Attention: Due To The Different Positions Of Oxygen Sensors In Different Cars, For Some Oxygen Sensors Our Product May Not Be Convenient To Operate, Please Confirm The Suitability Before Purchasing.).
Anti-Slip Slotts: The Square Hole Of This Socket Has A Unique Slotted Design. The Four Small Slots Have A Good Anti-Slip Effect, Which Can Help To Hold The Ratchet Firmly, Making You More Secure When Using The Oxygen Sensor Tool..
Premium Material: This Oxygen Sensor Socket Is Made Of High Quality Cr-V Steel, Meets And Exceeds Ansi/Asme Standards. It Has Surface Phosphating To Improve Oxidation And Corrosion Resistance, And Heat Treatment To Improve Material Performance And Make It More Durable..
Features
- Product Size: The O2 sensor socket has a standard 6-point shape. The socket size is 22mm/(7/8"), which can fit most oxygen sensors. The square hole size is 10mm/(3/8"), suitable for 3/8" drive ratchet or breaker bar.
- Premium Material: This oxygen sensor socket is made of high quality Cr-V steel, meets and exceeds ANSI/ASME standards. It has surface phosphating to improve oxidation and corrosion resistance, and heat treatment to improve material performance and make it more durable.
- Side Wire Gate: The O2 sensor removal tool is designed with a side wire gate. It is wide enough to pass through the wire without damaging it. This kind of design allows you to remove the oxygen sensor while still connecting the wire harness, which is both convenient and safe.
- Anti-slip Slotts: The square hole of this socket has a unique slotted design. The four small slots have a good anti-slip effect, which can help to hold the ratchet firmly, making you more secure when using the oxygen sensor tool.
- Wide Application: This O2 sensor remover is suitable for most cars, you can use it to disassemble, replace and clean the car oxygen sensor to help reduce your car's emissions and fuel consumption. (ATTENTION: Due to the different positions of oxygen sensors in different cars, for some oxygen sensors our product may not be convenient to operate, please confirm the suitability before purchasing.)
- See more on Amazon...
Brand: DURATECH | Manufacturer: Hangzhou Great Star Industrial Co,.LTD
See On Amazon
Looking For Something Else?
Search