Ade Advanced Optics RD3-018-SC Spike Green Dot Sight for Springfield Hellcat OSP/PRO, Mossberg MC2SC, Ruger Max-9, Kimber R7 Mako and Canik TP9 Elite SC - NOT Red Dot
Asin: B09V6NCQ7G | Model: RD3-018G-SC | PartNumber: RD3-018G-SC
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Hard Coated Aircraft Aluminum And Multi-Coated Glass. Not Plastic Body With Polymer Lens..
Ade Does Not Know The Screw Spec Every Pistol Manufacture Used For Their Screw Hole. Please Ask The Pistol Manufacture What Screw Specs They Used On The Hole And Ask Them To Provide The Screw. If You Can’T Get The Screw To Work Properly, We Recommend Going To A Local Hardware Store Such As Ace Hardware To Get The Right Size..
For Non-Optics Ready Pistols That Need To Use An Optic Plate/Adapter To Replace The Pistol Manufacturer Equipped Rear Sight, Ade Spike's Rear White Dot Will Act As A Pistol Factory Original Rear Sight For Co-Witness..
Comes With Screws For Several Optics Ready Handguns. Does Not Comes With Any Mounting Plate Such As Picatinny Mount Or Plate Made For A Specific Handgun..
4Moa, Weight Approximately 17.6 Grames(0.62Oz), (Length)1.6" X (Width).92" X (Height).93".
Ade Spike Created An Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A Back Up Iron Sight. With The Ultra Short Design, The Red Dot Provides A Distance/Gap On Some Full Size Optics Ready Pistols, To Give Enough Distance To Be A Co-Witness Back Up Sight, In Addition To The Led Dot And Pistol Equipped Iron Sight.
Ade Spike Red Dot Sight Is Always Powered On With Automatic Brightness. Operates With A Single Cr2032 3V Battery. With Our Advanced Technology The Sight Only Draws Approximate 700 Microampere Powers To Give A Very Long Battery Life. The Brightness Will Turn High And Low Accordingly To The Environment Brightness..
Comes With 3 Pairs Of Screws For Sig P365xl/X, Springfield Hellcat Osp And Canik Tp9 Elite Sc Only. The Provided Screws Might Not Work With Every Compatible Pistol Listed. Ade Makes The Red Dot To Accept The Industrial Standard Footprint. The Pistol Manufacturer Makes The Optic Cut/Slide For The Same Footprint, But They Have Their Own Opinions To Decide Which Type Screws That The Screw Holes Take..
Designed To Fit Canik Elite Tp9 Sc, Canik Mete Sfx, Canik Mete Sft, Sig P365xl/P365x, Ruger Max-9, Glock 43X Mos/48 Mos(Not Compatible With Regular Glock 43X/48 That Are Not Mos), Springfield Hellcat Osp, S&W Shield 2.0 Optics Ready, S&W Mp9 Ez, S&W M&P Shield Plus Performance Center, Walther Pps M2 Optics Ready, Girsan Mc1911sc Ultimate Or Any Pistol/Mounting Plate/Slide With Rms/Rmsc Screw Pattern/Footprint..
Features
- This is ADE's new GREEN dot version of RD3-018 Spike. The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dot(this one) and FDE/TAN body 4MOA Red dot.
- Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
- Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
- ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
- 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6 x (Width).92 x (Height).93
- Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
- For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.
- Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
- Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
- ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.04 pounds
See On Amazon Similar To Ade Advanced Optics RD3018SC Spike
#1
Ade Advanced Optics RD3-006B Green Dot Sight for Handgun - Not Red
Asin: B074ZTGXKJ | Model: RD3-006B | PartNumber: RD3-006B | Ean: 0640978398459 | UPC: 640978398459
Since Its Initial Release In 2014, We've Implemented Numerous Improvements To Enhance Its Durability, Ensuring It Can Withstand Recoil While Also Improving Its Ability To Hold Zero. The Front Switch, Battery Housing, And Hardware Have All Been Recently Updated, Reflecting Our Commitment To Continuous Enhancement. This Product Is Proudly Designed In Oregon..
Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-021 Nuwa Pro And Rd3-030 Apollo Fit Optic Cut/Optic Plate That Is Compatible With Shield Rms/Rmsc/Deltapoint Pro Footprint.
Ade Rd3-021C Nuwacc Fits Optic Cut/Optic Plate That Is Compatible With Trijicon Rmrcc Footprint.
If You're Not Seeing A Perfect Round Dot But Instead Observe A Splashed Dot, Half-Moon Shape, Multi-Dot, Or Starburst, There's A High Probability (99%) That You Might Have Astigmatism Without Being Aware Of It. What You Perceive Is Likely A Small Reflection Of The Led Light On The Lens. A Quick And Simple Way To Confirm This Is By Using Your Cellphone To Take A Photo Of The Dot. If The Photo Shows A Circular Dot, You've Essentially Diagnosed Yourself With Astigmatism..
Ade Rd3-006 Huracan,Rd3-009 Crusader,Rd3-012 Delta, Rd3-012 Pro, Rd3-013 Bertrillium ,Rd3-015 Zantitium, Rd3-028 Ares Fit Optic Cut/Plate That Is Compatible With Vortex Venom/Burris Fastfire/Doctor Footprint.
Although It's Feasible To Install The Optic On A Handgun Without The Assistance Of A Gunsmith, We Highly Recommend Seeking The Expertise Of A Professional For The Installation Process. It's Essential To Note That Unprofessional Installations, Such As Improper Torque Application, Can Lead To Issues Like Loose Screws, An Inability To Hold Zero, Damage To The Firearm Or Optic, And Even Pose A Risk Of Personal Injury..
Ade Rd3-019 Stingray, Rd3-020 Raptor, Rd3-022 Artemis, Rd3-023 Valkyrie And Rd3-029 Trumpet Fit Optic Cut/Optic Plate/ That Is Compatible With Trijicon Rmr/Sro/Holosun 407C/507C Footprint.
The On/Off Switch For This Sight Is Conveniently Positioned At The Front, Making It Much Easier To Press Compared To Red Dots With Side-Mounted Switches. It Features A 3 Moa Dot Size And Offers 5 Illumination Settings. The Sight Is Fully Adjustable For Windage And Elevation And Can Be Locked Into Place. With Unlimited Eye Relief And Various Illumination Settings, It Is Powered By An Included Lithium Cr2032 Battery..
Features
- This green dot sight comes equipped with a Picatinny mounting base and is also compatible with various handgun mounting plates that replace the rear sight dovetail. It's designed to fit the Doctor Footprint Plate/Slide seamlessly.
- The on/off switch for this sight is conveniently positioned at the front, making it much easier to press compared to red dots with side-mounted switches. It features a 3 MOA dot size and offers 5 illumination settings. The sight is fully adjustable for windage and elevation and can be locked into place. With unlimited eye relief and various illumination settings, it is powered by an included lithium CR2032 battery.
- Since its initial release in 2014, we've implemented numerous improvements to enhance its durability, ensuring it can withstand recoil while also improving its ability to hold zero. The front switch, battery housing, and hardware have all been recently updated, reflecting our commitment to continuous enhancement. This product is proudly designed in Oregon.
- Although it's feasible to install the optic on a handgun without the assistance of a gunsmith, we highly recommend seeking the expertise of a professional for the installation process. It's essential to note that unprofessional installations, such as improper torque application, can lead to issues like loose screws, an inability to hold zero, damage to the firearm or optic, and even pose a risk of personal injury.
- If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability (99%) that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.
- ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint
- ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint
- ADE RD3-021c NUWAcc fits optic cut/optic plate that is compatible with Trijicon RMRcc footprint
- ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Dimensions: 2.50 x 4.80 x 2.00 inches | Weight: 0.40 Pounds
Warranty: 1 year
See On Amazon #2
Ade Advanced Optics Spike (RD3-018) Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT, Sig Sauer 365XL, Ruger Max9 and Springfield Hellcat OSP/PRO
Asin: B08JZFNKR8
Ade Spike Red Dot Sight Is Always Powered On With Automatic Brightness. Operates With A Single Cr2032 3V Battery. With Our Advanced Technology The Sight Only Draws Approximate 700 Microampere Powers To Give A Very Long Battery Life. The Brightness Will Turn High And Low Accordingly To The Environment Brightness..
For Non-Optics Ready Pistols That Need To Use An Optic Plate/Adapter To Replace The Pistol Manufacturer Equipped Rear Sight, Ade Spike's Rear White Dot Will Act As A Pistol Factory Original Rear Sight For Co-Witness..
Comes With 3 Pairs Of Screws For Sig P365xl/X, Springfield Hellcat Osp And Canik Tp9 Elite Sc Only. The Provided Screws Might Not Work With Every Compatible Pistol Listed. Ade Makes The Red Dot To Accept The Industrial Standard Footprint. The Pistol Manufacturer Makes The Optic Cut/Slide For The Same Footprint, But They Have Their Own Opinions To Decide Which Type Screws That The Screw Holes Take..
Comes With Screws For Several Optics Ready Handguns. Does Not Comes With Any Mounting Plate Such As Picatinny Mount Or Plate Made For A Specific Handgun..
Ade Spike Created An Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A Back Up Iron Sight. With The Ultra Short Design, The Red Dot Provides A Distance/Gap On Some Full Size Optics Ready Pistols, To Give Enough Distance To Be A Co-Witness Back Up Sight, In Addition To The Led Dot And Pistol Equipped Iron Sight.
4Moa, Weight Approximately 17.6 Grames(0.62Oz), (Length)1.6" X (Width).92" X (Height).93".
Ade Does Not Know The Screw Spec Every Pistol Manufacture Used For Their Screw Hole. Please Ask The Pistol Manufacture What Screw Specs They Used On The Hole And Ask Them To Provide The Screw. If You Can’T Get The Screw To Work Properly, We Recommend Going To A Local Hardware Store Such As Ace Hardware To Get The Right Size..
Hard Coated Aircraft Aluminum And Multi-Coated Glass. Not Plastic Body With Polymer Lens..
Features
- Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
- Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
- ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
- 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6 x (Width).92 x (Height).93
- Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
- Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
- For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.
- Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
- ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.04 pounds
See On Amazon #3
Ade Advanced Optics RD3-009-2 Red Dot Sights
Asin: B00OJHL5RC | Model: RD3-009-2 | PartNumber: RD3-009-2 | Ean: 0710500199165 | UPC: 710500199165
This Red Dot Comes With A Picatinny Mounting Base. It Is Also Compatible With Varies Handgun Mounting Plates That Replace Rear Sight Dovetail. It Is Also Compatible To Optics Ready Pistols Such As Glock Mos, Springfield Osp,.
Ade Model Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds. Any Plate Made For Those Brands Also Fits This Sight..
Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. 5 Moa. 5 Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Waterproof/Shock/Fog Resistant. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Features
- We have made several improvements since it's initial release in 2014. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.
- Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- This red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
- Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.45 Pounds
Warranty: 1 year
See On Amazon #4
Ade Advanced Optics RD3-006A Green Dot Reflex Sight for Handgun
Asin: B071ZW79QJ | Model: rd3-006A | PartNumber: rd3-006A | Ean: 0640978348645 | UPC: 640978348645
However The Front Switch Of The Sight Needs To Trim Down 2Mm Depends On Exact Pistol Model If The Pistol's Pre-Cut Is Very Short...
Ade Rd3 006,Rd3 009,Rd3 012,Rd3 013,Rd3 015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds.Any Plate Made For Those Brands Also Fits This Sight..
Comes With An Removable Picatinny Mounting Base To Attach To Any Thing With Piatinny Rail. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Powered By A Lithium Cr2032 Battery.
This Huracan Green Dot Sight Fits Directly To Optics Ready Pistols That Does Not Need To Remove Rear Sight Such As Glock Mos, Springfield Osp. It Also Fits Canik Using Canik Provided Mount Marked For Doctor/Venom Type Red Dot..
Features
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail.
- This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for Doctor/Venom type red dot.
- However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short..
- Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery
- ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.40 Pounds
See On Amazon #5
Ade Advanced Optics RD3-006B-2 Green Dot Sight for Handgun - Compatible with Doctor/Venom/Fastfire Footprint Red Dot
Asin: B08FSQ7Y73
This Green Dot Comes With A Picatinny Mounting Base. It Is Also Compatible With Varies Handgun Mounting Plates That Replace Rear Sight Dovetail. It Is Also Compatible To Optics Ready Pistols Such As Glock Mos, Springfield Osp,.
Ade Model Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds. Any Plate Made For Those Brands Also Fits This Sight..
4 Moa. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Features
- We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Newly updated front switch designed in Oregon.
- Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,
- 4 MOA. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included)
- Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #6
ADE Picatinny Mounting Plate/Adapter/Mount -Compatible with Shield RMS/RMSc/RMSw/SMS,Sig Sauer Romeo Zero, ADE RD3-018 Spike, Nuwa/Apollo, Vortex Defender-CCW,Bushnell RXC-200 Ultra-Compact Red dot.
Asin: B09BDFRS5V | Ean: 0640978407786 | UPC: 640978407786
Designed To Use On Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-030 Apollo, Shield Rms/Rmsc/Rmsw/Sms And Romeo Zero Red Dot Sights..
Does Not Compatible With Holosun 407K/507K, User Must Grind(Lots Of Grinding) To Completely Remove/Flat Out The Two Rear Pin To Fit 407K/507K. Ade Has Is Releasing A New Plate Made Specifically For 407K/507K, Please Search Amazon Item Number/Asin: B09tmpghrl.
Also Compatible With Leupold Delta Point Pro, Jp Enterprises Jpoint And Swampfox Sentinel, Vortex Defender-Ccw, Bushnell Rxc-200 Ultra-Compact Red Dot Sights. Finished In A Matte Black Anodize. Comes With Two Screws.
This Optic Picatinny Mount Made By Ade Is To Connect To Certain Type Of Optic Sight To Standard 1913 Picatinny/Weaver Rail. It Does Not Connect To Handgun Because Most Handguns Does Not Has A Picatinny Rail On Top.
Features
- Wrong Inventory fixed, customer will receive correct footprint for RMS, not RMR
- This optic picatinny mount made by ADE is to connect to certain type of optic sight to standard 1913 picatinny/weaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top
- Designed to use on ADE RD3-018 SPIKE, RD3-021 Nuwa, RD3-030 Apollo, Shield RMS/RMSc/RMSw/SMS and Romeo Zero Red dot sights.
- Also Compatible with Leupold Delta Point Pro, JP Enterprises JPoint and Swampfox Sentinel, Vortex Defender-CCW, Bushnell RXC-200 Ultra-Compact red dot sights. Finished in a Matte Black Anodize. Comes with two screws
- Does NOT compatible with Holosun 407k/507k, user MUST grind(lots of grinding) to completely REMOVE/Flat out the two rear pin to fit 407k/507k. Ade has is releasing a new plate made specifically for 407k/507k, please search amazon item number/Asin: B09TMPGHRL
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #7
Ade Advanced Optics RD3-018-SC Spike Red Dot Sight for Springfield Hellcat (OSP/PRO), P365XL Spectre Comp and Canik TP9 Elite SC
Asin: B08JZJ7K1K
Ade Spike Red Dot Sight Is Always Powered On With Automatic Brightness. Operates With A Single Cr2032 3V Battery. With Our Advanced Technology The Sight Only Draws Approximate 700 Microampere Powers To Give A Very Long Battery Life. The Brightness Will Turn High And Low Accordingly To The Environment Brightness..
For Non-Optics Ready Pistols That Need To Use An Optic Plate/Adapter To Replace The Pistol Manufacturer Equipped Rear Sight, Ade Spike's Rear White Dot Will Act As A Pistol Factory Original Rear Sight For Co-Witness..
Comes With 3 Pairs Of Screws For Sig P365xl/X, Springfield Hellcat Osp And Canik Tp9 Elite Sc Only. The Provided Screws Might Not Work With Every Compatible Pistol Listed. Ade Makes The Red Dot To Accept The Industrial Standard Footprint. The Pistol Manufacturer Makes The Optic Cut/Slide For The Same Footprint, But They Have Their Own Opinions To Decide Which Type Screws That The Screw Holes Take..
Comes With Screws For Several Optics Ready Handguns. Does Not Comes With Any Mounting Plate Such As Picatinny Mount Or Plate Made For A Specific Handgun..
Ade Spike Created An Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A Back Up Iron Sight. With The Ultra Short Design, The Red Dot Provides A Distance/Gap On Some Full Size Optics Ready Pistols, To Give Enough Distance To Be A Co-Witness Back Up Sight, In Addition To The Led Dot And Pistol Equipped Iron Sight.
4Moa, Weight Approximately 17.6 Grames(0.62Oz), (Length)1.6" X (Width).92" X (Height).93".
Ade Does Not Know The Screw Spec Every Pistol Manufacture Used For Their Screw Hole. Please Ask The Pistol Manufacture What Screw Specs They Used On The Hole And Ask Them To Provide The Screw. If You Can’T Get The Screw To Work Properly, We Recommend Going To A Local Hardware Store Such As Ace Hardware To Get The Right Size..
Hard Coated Aircraft Aluminum And Multi-Coated Glass. Not Plastic Body With Polymer Lens..
Features
- Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
- Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
- ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
- 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6 x (Width).92 x (Height).93
- Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
- Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
- For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.
- Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
- ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.04 Pounds
See On Amazon #8
ADE Artemis (RD3-022) Motion Sensor Activated, Multi-6 Reticles RED Dot Sight for RMR Footprint/Mounting Plate/Slide/Plate Optics Ready Pistol - 2 MOA Dot + 50 MOA Circle
Asin: B0BT6V8C4G
The Artemis Pro Stands Out With The Industry's First 6-Reticle System. Users Can Seamlessly Switch Between Various Options: A 2 Moa Dot Only, A 32 Moa Circle Only, A Four-Dashes Reticle At 3/6/9/12 O'clock, A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot With Dashes At 3/6/9/12 O'clock, Or A 50 Moa Circle With 2 Moa Dot And Dashes At 3/6/9/12 O'clock—All With A Simple Push Of A Button. This Versatility Ensures That Users Can Tailor Their Aiming Experience To Match Different Scenarios Effortlessly..
The Top Load System Is A Game-Changer; There's No Need To Remove The Sight For A Battery Swap. With A Remarkable Battery Life Of Up To 10,000 Hours, It Ensures Long-Lasting Performance. Offering Seven Brightness Settings, Including One Specifically Tailored For Use With Night Vision, The Red Dot Operates Seamlessly With Just A Single Cr1632 Battery..
Included In The Package Are Essential Accessories To Enhance Your Experience: A Tool, User Manual, Lens Cloth, Red Dot Cover, Screws, And A Cr1632 Battery. However, It's Important To Note That The Optics Plate For A Specific Firearm Is Not Part Of The Package And Needs To Be Obtained Separately..
The Motion Activated System Is A Standout Feature Of The Trumpet. When The Device Is Active, The Red Dot Illumination Goes Into Sleep Mode After Two Minutes Of Inactivity. However, The Moment Any Motion Or Vibration Is Detected, It Promptly Switches On The Illumination At The Previous Brightness Setting, Ensuring Quick Responsiveness To User Interaction..
Ade Has Rolled Out The Pro Series For Their Rd3 Series Micro Red Dots, And One Standout In This Lineup Is The Artemis Pro (D3-022Pro). What Sets The Pro Series Apart Are The Extra Features It Brings To The Table, Including A Motion Activated System, Multi Reticle Technology, And The Convenience Of Top/Side Battery Loading. With This, Users Can Swap Out The Battery Without Having To Detach The Red Dot From The Pistol, Adding A Layer Of User-Friendly Functionality..
Features
- The Ade Artemis Pro (RD3-022 Pro) is a versatile multi-reticle red dot crafted to seamlessly integrate with any pistol mounting plate, slide, or cut compatible with RMR/SRO, Holosun 407C/507C/508T footprint red dots.
- ADE has rolled out the PRO SERIES for their RD3 series micro red dots, and one standout in this lineup is the Artemis PRO (D3-022PRO). What sets the PRO series apart are the extra features it brings to the table, including a Motion Activated System, Multi Reticle Technology, and the convenience of Top/Side battery loading. With this, users can swap out the battery without having to detach the red dot from the pistol, adding a layer of user-friendly functionality.
- The Artemis PRO stands out with the industry's first 6-reticle system. Users can seamlessly switch between various options: a 2 MOA dot only, a 32 MOA circle only, a four-dashes reticle at 3/6/9/12 o'clock, a 32 MOA circle with 2 MOA dot, a 2 MOA dot with dashes at 3/6/9/12 o'clock, or a 50 MOA circle with 2 MOA dot and dashes at 3/6/9/12 o'clock all with a simple push of a button. This versatility ensures that users can tailor their aiming experience to match different scenarios effortlessly.
- The Motion Activated System is a standout feature of the Trumpet. When the device is active, the red dot illumination goes into sleep mode after two minutes of inactivity. However, the moment any motion or vibration is detected, it promptly switches on the illumination at the previous brightness setting, ensuring quick responsiveness to user interaction.
- The Top Load System is a game-changer; there's no need to remove the sight for a battery swap. With a remarkable battery life of up to 10,000 hours, it ensures long-lasting performance. Offering seven brightness settings, including one specifically tailored for use with night vision, the red dot operates seamlessly with just a single CR1632 battery.
- Included in the package are essential accessories to enhance your experience: a tool, user manual, lens cloth, red dot cover, screws, and a CR1632 battery. However, it's important to note that the optics plate for a specific firearm is not part of the package and needs to be obtained separately.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Warranty: 1 year
See On Amazon #9
Ade Advanced Optics Python Green Dot Reflex Sight for Handgun - Compatible with Doctor Footprint
Asin: B074ZVCTXB | Model: rd3-006x-1 | PartNumber: rd3-006x-1 | Ean: 0640978398466 | UPC: 640978398466
Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture.
Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Powered By A Lithium Cr2032 Battery(Included).
The On/Off Switch Is Located At The Front Of The Sight, It Is So Much Easier To Press Than The Red Dots Has The Switches On The Side. 3 Moa. 5 Illumination Settings.
Features
- The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield. Can also be used with a long range rifle scope for that perfect Backup System
- The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side. 3 MOA. 5 Illumination settings
- Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery(Included)
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.40 pounds
Warranty: 1 year
See On Amazon #10
Ade Advanced Optics Huracan Green Dot Reflex Sight for Handgun - Compatible with Doctor/Venom/Fastfire Red Dot Footprint
Asin: B071JHZXFS | Model: rd3-006A-HURACAN | PartNumber: rd3-006A-HURACAN | Ean: 0640978348652 | UPC: 640978348652
It Is Fits Directly To "Optics Ready" Pistols That Does Not Need To Remove Rear Sight Such As Glock Mos, Springfield Osp. It Also Fits Canik Using Canik Provided #1 Mount, However The Front Switch Of The Sight Needs To Trim Down 2Mm..
Ade Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds.Any Plate Made For Those Brands Also Fits This Sight.Rd3-011 Only Fits Trijicon Ftprt.
3 Moa. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).It Is Also Compatible With Varies Handgun Mounting Plates That Replace Rear Sight Dovetail..
Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture.This Green Dot Comes With A Picatinny Mounting Base. Other Handgun Mounting Plates Are Not Included..
Features
- We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.This GREEN dot comes with a picatinny mounting base.
- Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.This GREEN dot comes with a picatinny mounting base. Other handgun mounting plates are not included.
- It is fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided #1 mount, however the front switch of the sight needs to trim down 2mm.
- 3 MOA. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail.
- ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.RD3-011 only Fits Trijicon ftprt
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.40 Pounds
Warranty: 1 year manufacturer
See On Amazon #11
ADE RD3-012-PRO Series Motion Activated Red Dot Sight with Multi Reticle System for Optics Ready Pistol Slide/Cut That is Compatible with Doctor Footprint
Asin: B0B3SCJ98C | Model: RD3-012PRO-RED | PartNumber: RD3-012PRO-RED
The Ade Delta Pro(D3-012Pro) Has Motion Activated System. While Delta Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting..
1.75" Length X1.25" Width X1.15" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light..
The Reticle Can Be Switched Between A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot Only, Or A 32 Moa Ring Only At The Push Of A Button. Better Yet, The Same Led Projects Both Reticles, So No Re-Zeroing Is Necessary. Operates With A Single Cr1632 Battery. Press And Hold The Down Switch For 3 Seconds To Manually Turn On/Off The Power. Press And Hold The Up Switch For 3 Seconds To Change Reticle. Quick Press Up/Down Switches To Adjust Brightness..
Top Load System, No Need To Remove The Sight To Change The Battery. Comes With Red Dot, Tool, Removeable Picatinny Plate With Two Screws, Cover, Lens Cloth And Instruction Manual. Fits Pistol Optic Plate/Cut That Is Compatible With Doctor/Vortex Venom/Burris Fastfire Footprint. Does Not Fit Optic Plate/Cut For Rmr, Shield Rms Type Footprints..
Features
- ADE is releasing the 2023 PRO SERIES for ADE RD3-012(2016-present) Delta red dot called Delta PRO(D3-012PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate/cut that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit optic plate/cut for RMR, Shield RMS type footprints.
- The ADE Delta PRO(D3-012PRO) has Motion Activated System. While Delta PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting.
- The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
- 1.75 length x1.25 width x1.15 height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.57 pounds
See On Amazon #12
Ade Advanced Optics RD3-030/APOLLO-PRO Sensor Activated, Solar Powered 4 MOA Red Dot Sight for Springfield Hellcat OSP/PRO, Sig P365XL Spectre Comp, Canik TP9 Elite SC, Mossberg MC2SC, Kimber R7 Mako
Asin: B0BM56M5FM
The Apollo Pro Is Always Powered On And Features An Auto-Dimming Sensor Which Regulates Proper Dot Brightness Based On Ever Changing Ambient Light Conditions. The Brightness Will Turn High And Low Accordingly To The Environment Brightness. Operates With A Single Cr2032 3V Battery. There Is No Physical On/Off/Brightness Button. The Sensor Does It All..
Comes With The Adjustment Tool, User Manual, Lens Cloth, Red Dot Cover, Cr2032 Battery, Screws. Parallax-Free & Unlimited Eye Relief. Made Of Aircraft Aluminum In Anodized Black Finish With Multi-Coated Lens. Weight Approximately 17.5 Grames(0.61Oz), (Length)1.6" X (Width)1" X (Height).9". The Objective Lens Is 22Mmx16m/0.87"X0.63".
Comes With 3 Pairs Of Screws For Sig P365xl/X, Springfield Hellcat Osp And Canik Tp9 Elite Sc Only. The Provided Screws Might Not Work With Every Compatible Pistol Listed. Ade Makes The Red Dot To Accept The Industrial Standard Footprint. The Pistol Manufacturer Makes The Optic Cut/Slide For The Same Footprint, But They Have Their Own Opinions To Decide Which Type Screws That The Screw Holes Take..
Ade Apollo Pro Created An Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A Back Up Iron Sight..
Equipped With Solar Power That Allows The Red Dot Sight To Continue To Be Powered When Your Battery Is Out. The Battery Life Can Last Up To 50,000 Hours Depending On Settings..
Features
- ADE is introducing all new APOLLO PRO(RD3-030PRO). This ADE APOLO PRO is designed to fit any pistol/mounting plate/slide/optic cut with RMS/RMSC screw pattern/footprint.
- Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.
- The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical on/off/brightness button. The sensor does it all.
- Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.
- Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free & Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames(0.61oz), (Length)1.6 x (Width)1 x (Height).9. The objective lens is 22mmx16m/0.87x0.63
- Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.04 pounds
Warranty: 1 year manufacturer
See On Amazon #13
ADE Pro Series Motion Activated System RD3-012-PRO Red Dot with 2 MOA Dot and 32 MOA Circle Multi Reticle System - IP7 Waterproof
Asin: B0B3SDWHJF | Model: RD3-012-PRO-1 | PartNumber: RD3-012-PRO-1
The Ade Delta Pro(D3-012Pro) Has Motion Activated System. While Delta Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting..
1.75" Length X1.25" Width X1.15" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light..
The Reticle Can Be Switched Between A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot Only, Or A 32 Moa Ring Only At The Push Of A Button. Better Yet, The Same Led Projects Both Reticles, So No Re-Zeroing Is Necessary. Operates With A Single Cr1632 Battery. Press And Hold The Down Switch For 3 Seconds To Manually Turn On/Off The Power. Press And Hold The Up Switch For 3 Seconds To Change Reticle. Quick Press Up/Down Switches To Adjust Brightness..
Top Load System, No Need To Remove The Sight To Change The Battery. Comes With Red Dot, Tool, Removeable Picatinny Plate With Two Screws, Cover, Lens Cloth And Instruction Manual. Fits Pistol Optic Plate/Cut That Is Compatible With Doctor/Vortex Venom/Burris Fastfire Footprint. Does Not Fit Optic Plate/Cut For Rmr, Shield Rms Type Footprints..
Features
- ADE is releasing the 2023 PRO SERIES for ADE RD3-012(2016-present) Delta red dot called Delta PRO(D3-012PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate/cut that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit optic plate/cut for RMR, Shield RMS type footprints.
- The ADE Delta PRO(D3-012PRO) has Motion Activated System. While Delta PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting.
- The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
- 1.75 length x1.25 width x1.15 height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.50 pounds
See On Amazon #14
ADE RD3-022 Artemis PRO Motion Activated, Multi-6 Reticles RED Dot Sight for Optics Ready Pistol That is Compatible with Trijicon RMR SRO Footprint/Slide/Screw Pattern
Asin: B0BT6TMQ7R
The Artemis Pro Stands Out With The Industry's First 6-Reticle System. Users Can Seamlessly Switch Between Various Options: A 2 Moa Dot Only, A 32 Moa Circle Only, A Four-Dashes Reticle At 3/6/9/12 O'clock, A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot With Dashes At 3/6/9/12 O'clock, Or A 50 Moa Circle With 2 Moa Dot And Dashes At 3/6/9/12 O'clock—All With A Simple Push Of A Button. This Versatility Ensures That Users Can Tailor Their Aiming Experience To Match Different Scenarios Effortlessly..
The Top Load System Is A Game-Changer; There's No Need To Remove The Sight For A Battery Swap. With A Remarkable Battery Life Of Up To 10,000 Hours, It Ensures Long-Lasting Performance. Offering Seven Brightness Settings, Including One Specifically Tailored For Use With Night Vision, The Red Dot Operates Seamlessly With Just A Single Cr1632 Battery..
Included In The Package Are Essential Accessories To Enhance Your Experience: A Tool, User Manual, Lens Cloth, Red Dot Cover, Screws, And A Cr1632 Battery. However, It's Important To Note That The Optics Plate For A Specific Firearm Is Not Part Of The Package And Needs To Be Obtained Separately..
The Motion Activated System Is A Standout Feature Of The Trumpet. When The Device Is Active, The Red Dot Illumination Goes Into Sleep Mode After Two Minutes Of Inactivity. However, The Moment Any Motion Or Vibration Is Detected, It Promptly Switches On The Illumination At The Previous Brightness Setting, Ensuring Quick Responsiveness To User Interaction..
Ade Has Rolled Out The Pro Series For Their Rd3 Series Micro Red Dots, And One Standout In This Lineup Is The Artemis Pro (D3-022Pro). What Sets The Pro Series Apart Are The Extra Features It Brings To The Table, Including A Motion Activated System, Multi Reticle Technology, And The Convenience Of Top/Side Battery Loading. With This, Users Can Swap Out The Battery Without Having To Detach The Red Dot From The Pistol, Adding A Layer Of User-Friendly Functionality..
Features
- The Ade Artemis Pro (RD3-022 Pro) is a versatile multi-reticle red dot crafted to seamlessly integrate with any pistol mounting plate, slide, or cut compatible with RMR/SRO, Holosun 407C/507C/508T footprint red dots.
- ADE has rolled out the PRO SERIES for their RD3 series micro red dots, and one standout in this lineup is the Artemis PRO (D3-022PRO). What sets the PRO series apart are the extra features it brings to the table, including a Motion Activated System, Multi Reticle Technology, and the convenience of Top/Side battery loading. With this, users can swap out the battery without having to detach the red dot from the pistol, adding a layer of user-friendly functionality.
- The Artemis PRO stands out with the industry's first 6-reticle system. Users can seamlessly switch between various options: a 2 MOA dot only, a 32 MOA circle only, a four-dashes reticle at 3/6/9/12 o'clock, a 32 MOA circle with 2 MOA dot, a 2 MOA dot with dashes at 3/6/9/12 o'clock, or a 50 MOA circle with 2 MOA dot and dashes at 3/6/9/12 o'clock all with a simple push of a button. This versatility ensures that users can tailor their aiming experience to match different scenarios effortlessly.
- The Motion Activated System is a standout feature of the Trumpet. When the device is active, the red dot illumination goes into sleep mode after two minutes of inactivity. However, the moment any motion or vibration is detected, it promptly switches on the illumination at the previous brightness setting, ensuring quick responsiveness to user interaction.
- The Top Load System is a game-changer; there's no need to remove the sight for a battery swap. With a remarkable battery life of up to 10,000 hours, it ensures long-lasting performance. Offering seven brightness settings, including one specifically tailored for use with night vision, the red dot operates seamlessly with just a single CR1632 battery.
- Included in the package are essential accessories to enhance your experience: a tool, user manual, lens cloth, red dot cover, screws, and a CR1632 battery. However, it's important to note that the optics plate for a specific firearm is not part of the package and needs to be obtained separately.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.18 pounds
Warranty: 1 year
See On Amazon #15
Ade Advanced Optics Spike Red Dot Sight for RMS/RMSC Footprint Optics Ready Pistol Such as Canik TP9 Elite SC, Mete SFT, Sig Sauer P365XL/P365X,Ruger Max-9,Glock 43 MOS,Springfield Hellcat(OSP/PRO)
Asin: B08JZJTJC1
Ade Spike Red Dot Sight Is Always Powered On With Automatic Brightness. Operates With A Single Cr2032 3V Battery. With Our Advanced Technology The Sight Only Draws Approximate 700 Microampere Powers To Give A Very Long Battery Life. The Brightness Will Turn High And Low Accordingly To The Environment Brightness..
For Non-Optics Ready Pistols That Need To Use An Optic Plate/Adapter To Replace The Pistol Manufacturer Equipped Rear Sight, Ade Spike's Rear White Dot Will Act As A Pistol Factory Original Rear Sight For Co-Witness..
Comes With 3 Pairs Of Screws For Sig P365xl/X, Springfield Hellcat Osp And Canik Tp9 Elite Sc Only. The Provided Screws Might Not Work With Every Compatible Pistol Listed. Ade Makes The Red Dot To Accept The Industrial Standard Footprint. The Pistol Manufacturer Makes The Optic Cut/Slide For The Same Footprint, But They Have Their Own Opinions To Decide Which Type Screws That The Screw Holes Take..
Comes With Screws For Several Optics Ready Handguns. Does Not Comes With Any Mounting Plate Such As Picatinny Mount Or Plate Made For A Specific Handgun..
Ade Spike Created An Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A Back Up Iron Sight. With The Ultra Short Design, The Red Dot Provides A Distance/Gap On Some Full Size Optics Ready Pistols, To Give Enough Distance To Be A Co-Witness Back Up Sight, In Addition To The Led Dot And Pistol Equipped Iron Sight.
4Moa, Weight Approximately 17.6 Grames(0.62Oz), (Length)1.6" X (Width).92" X (Height).93".
Ade Does Not Know The Screw Spec Every Pistol Manufacture Used For Their Screw Hole. Please Ask The Pistol Manufacture What Screw Specs They Used On The Hole And Ask Them To Provide The Screw. If You Can’T Get The Screw To Work Properly, We Recommend Going To A Local Hardware Store Such As Ace Hardware To Get The Right Size..
Hard Coated Aircraft Aluminum And Multi-Coated Glass. Not Plastic Body With Polymer Lens..
Features
- Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
- Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
- ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
- 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6 x (Width).92 x (Height).93
- Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
- Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
- For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.
- Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
- ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.04 Pounds
See On Amazon #16
Ade Advanced Optics RD3-006B Green Dot Sight for Handgun with Removeable Pictinny Base
Asin: B08FSTLT1Z | Ean: 0640978407380 | UPC: 640978407380
This Green Dot Comes With A Picatinny Mounting Base. It Is Also Compatible With Varies Handgun Mounting Plates That Replace Rear Sight Dovetail. It Is Also Compatible To Optics Ready Pistols Such As Glock Mos, Springfield Osp,.
Ade Model Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds. Any Plate Made For Those Brands Also Fits This Sight..
3 Moa. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Features
- We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Newly updated front switch designed in Oregon.
- Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,
- 3 MOA. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included)
- Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #17
Ade Advanced Optics RD3-023 Shake Wake Valkyrie 4 MOA GREEN Dot Sight for Optics Ready Pistol That is Compatible with RMR fooprint Optics Such as Holosun HS407C/HS507C/HS507T and Riton X3 Tactix PRD.
Asin: B09BQ17K85
The Valkyrie Gen 2 Also Fits Name Brand Pistol Manufacturer Made Optics Ready Pistols, Such As Glock Mos, S&W M&P 2.0 Op, Iwi Masada, Smith Wesson Mp C.O.R.E, Cz P10f/10C Optics Ready, Walther Q5 Match And Springfield Xd/Xdm/Xds Osp, Canik Tp9 Sfx/Combat, Fn 509/45 Tactical, Shadow Systems Mr 920 Using Pistol Manufacturer Provided Plate Marked For Trijicon Rmr Footprint..
4 Moa Green Dot. Comes With A Picatinny Mounting Plate And A Pair Of Screws. This Red Dot Does Not Comes With Any Other Optic Plate To Mount On An Specific Pistol.
Operates With A Single Cr2032 Battery(Install Underneath). Gives Around 800 Hour Battery Life. Auto Powers Off After 1 Hour Of Inactivity To Save Battery.Dimension 1.79X1.18X1.4 Inches. Weight 1.24 Oz. Shockproof/Fogproof.
Ade Valkyrie Created A Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A "Back Up Iron Sight" To Give Enough Distance To Be A Co-Witness Back Up Sight, In Addition To The Led Dot And Pistol Equipped Iron Sight..
For Non-Optics Ready Pistols That Need To Use An Optic Plate/Adapter To Replace The Pistol Manufacture Equipped Rear Sight, Ade Valkyrie's Rear White Dot Acts As A Pistol Factory Original Rear Sight For Co-Witness.
Those Name Brand Pistol Manufacturer Made "Optics Ready" Handguns All Come With Several Mounting Plates/Optic Cuts Marked For Different Brands Of Red Dots, Such As For Trijicon Rmr, Shield Rms And Vortex Venom Red Dot Footprint. The Valkyrie Fits One Of The Pistol Manufacturer Provided Plate Marked That Is Compatible With Trijicon Rmr..
This Model Is The Original Ade Valkyrie, Ade Also Have A Ade Valkyrie Gen2. The Difference Between Ade Valkyrie And Ade Valkyrie Gen2 Is That The Gen2 Is Slightly Shorter In Overall Length, And The Shorter Length Allows Gen2 To Sit Into Custom Rmr Cut, While Original Valkyrie Only Fits Optic Plate For Rmr Footprint..
Ade Rd3-023 Valkyrie Is A 4 Moa Green Dot Designed To Fit Any Pistol With A Pistol That Is Compatible With Rmr/Sro, Holosun 407C/507C/508T Footprint Red Dots. The Valkyrie Fits All Pistol With Optic Cuts For Trijicon Rmr/Sro, Including Aftermarket Slide Such As Rockslides, Polymer80 That Has A Optic Cut For Trijicon Rmr/Sro..
Features
- ADE is now adding Motion Awake/Shake and Wake feature to RD3-023 Valkyrie green dot. All customer purchased this green dot on or after July 31st 2023, will receive the Pro version of RD3-023 that is Motion Awake.
- ADE RD3-023 Valkyrie is a 4 MOA GREEN dot designed to fit any pistol with a PISTOL that is compatible with RMR/SRO, Holosun 407C/507C/508T footprint red dots. The Valkyrie fits all pistol with optic cuts for Trijicon RMR/SRO, including aftermarket slide such as Rockslides, Polymer80 that has a optic cut for Trijicon RMR/SRO.
- The Valkyrie Gen 2 also fits name brand pistol manufacturer made Optics Ready pistols, such as Glock MOS, S&W M&P 2.0 OP, IWI Masada, Smith Wesson MP C.O.R.E, CZ P10F/10C optics ready, Walther Q5 Match and Springfield XD/XDM/XDS OSP, Canik TP9 SFX/Combat, FN 509/45 Tactical, Shadow Systems MR 920 using pistol manufacturer provided plate marked for Trijicon RMR footprint.
- Those name brand pistol manufacturer made Optics Ready handguns all come with several mounting plates/optic cuts marked for different brands of red dots, such as for Trijicon RMR, Shield RMS and Vortex Venom red dot footprint. The Valkyrie fits one of the pistol manufacturer provided plate marked that is compatible with Trijicon RMR.
- ADE Valkyrie created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight.
- For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacture equipped rear sight, ADE Valkyrie's rear white dot acts as a pistol factory original rear sight for Co-Witness
- 4 MOA GREEN Dot. Comes with a picatinny mounting plate and a pair of screws. This red dot does NOT comes with any other optic plate to mount on an specific pistol
- Operates with a single CR2032 battery(install underneath). Gives around 800 hour battery life. Auto powers off after 1 hour of inactivity to save battery.Dimension 1.79x1.18x1.4 inches. Weight 1.24 oz. Shockproof/Fogproof
- This model is the original ADE Valkyrie, ADE also have a ADE Valkyrie Gen2. The difference between ADE Valkyrie and ADE Valkyrie Gen2 is that the Gen2 is slightly shorter in overall length, and the shorter length allows Gen2 to sit into custom RMR cut, while original Valkyrie only fits optic plate for RMR footprint.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.08 pounds
See On Amazon #18
Ade Advanced Optics Mini Red Dot Sight Mount Base for Taurus G2 series and Original G3, TX22 to Mount Crimson Trace CTS-1550,Swampfox Sentinal,JPoint,Shield RMSc,Romeo Zero,Vortex Defender CCW Red Dot
Asin: B09BBPXXXN
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Also Fit Jpoint, Shield Rmsc, Shield Smsc, Shield Rms2, Romeo X (Sorx1200 Only), Vortex Viper, Vortex Venom, Vortex Defender Ccw, Holosun 507K, Holosun 407K, Romeo Zero, Docter/Noblex Sight C, Docter/Noblex Sight 2+, Docter/Noblex Sight Iii, Docter/Noblex Quicksight 5.0 Vr, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3.
Also Fits: Delta Optical Minidot, Delta Optical Minidot Ii, Hawke Reflex 1×25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, Makdot 1×25, Vector Optics Scrd-19Ii Frenzy 1X17x24, Creative Xp Glasseagle Hd, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Dragonfly, Hex Wasp, Crimson Trace Ct Rad Pro, Crimson Trace Cts-1550, Crimson Trace Cts-1250, Cyelee Calf V2, Cyelee Cat Pro, Or Vomz Pilad 1×20..
*** The Jpoint, Shield Rmsc, Shield Smsc, Shield Rms2, Romeo Zero, Romeo X (Sorx1200 Only), Vortex Defender Ccw, Holosun 507K, Holosun 407K, Sightmark Mini, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Wasp, Cyelee Cat Pro, Crimson Trace Cts-1550, And Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-021 Pro, Rd3-030 Apollo Mount Using The Rear Set Of Mounting Holes And Do Not Use The Locating Pins At The Front Of The Plate. **.
Features
- This optic plate is made to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo). Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
- *** The JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo Zero, Romeo X (SORX1200 only), Vortex Defender CCW, Holosun 507K, Holosun 407K, Sightmark Mini, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Wasp, Cyelee CAT PRO, Crimson Trace CTS-1550, and ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 PRO, RD3-030 Apollo mount using the rear set of mounting holes and do not use the locating pins at the front of the plate. **
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo X (SORX1200 only), Vortex Viper, Vortex Venom, Vortex Defender CCW, Holosun 507K, Holosun 407K, Romeo Zero, Docter/Noblex Sight C, Docter/Noblex sight 2+, Docter/Noblex sight III, Docter/Noblex QUICKsight 5.0 VR, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3
- Also Fits: Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 1 25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 1 25, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Dragonfly, HEX Wasp, Crimson Trace CT RAD Pro, Crimson Trace CTS-1550, Crimson Trace CTS-1250, Cyelee CALF V2, Cyelee CAT PRO, or Vomz Pilad 1 20.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #19
Ade Advanced Optics HG54R-1 Universal Laser Sight, Red
Asin: B071F9DJZM | Model: hg54R-1 | PartNumber: hg54R-1 | Ean: 0640978348584 | UPC: 640978348584
Proprietary Mounting Design Provides Two Spring Loaded Pillar To Push To Rail Slot For Rock Solid Zero Movement. Weight: 1.13Oz (Battery Included). Does Not Fits Berreta Due To Extra Wide Trigger Guard..
Controlled By Ambidextrous Switch. It Offers Two Modes: Constant-On And Strobe. This Allows The User To Easily Set Their Mode Based On Personal Need Or Preference.
Operates With One Cr1/3N Batteries(Included). Battery Life: 1 Hours. The Unit Is Quickly And Easily, User-Installed In Moments And Can Be Painlessly Transferred From Firearm To Firearm.
Fit Rail-Equipped Pistols, Rifles And Shotguns. The Laser Sight Fits Onto Virtually Any Firearm With A Modern (M1913 Pica Tinny Or Weaver-Style) Accessory Rail.
Features
- Offers the brightest Red laser allowed by Law. Non-handheld class 3R laser product, < 5Mw power output. Ultra lightweight and compact 1.79"L x 1.06"W x .85"H
- Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern (M1913 Pica tinny or Weaver-style) accessory rail
- Proprietary mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight: 1.13oz (Battery included). Does NOT fits Berreta due to extra wide trigger guard.
- Operates with one CR1/3N batteries(included). Battery life: 1 hours. The unit is quickly and easily, user-installed in moments and can be painlessly transferred from firearm to firearm
- Controlled by ambidextrous switch. It offers two modes: constant-on and strobe. This allows the user to easily set their mode based on personal need or preference
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.00 Pounds
See On Amazon
Looking For Something Else?
Search