2pcs 2" Low Profile Wand Tilter Mechanism with 7/32" Hexagon Shaped Gear Hook Connection for Low Rail Horizontal Wood and Faux Wood Blinds headrail
Asin: B09T34Z5XM
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Hexagon Shaped Gear Hole In The Center Is 1/4"(6.35Mm) Wide In Diameter. Only Fit For The 2" Horizontal Wood And Faux Wood Blinds With 1-1/2"(38Mm) By 2-1/4"(57Mm) Headrails..
Please Kindly Check The Size In The Picture And Make Sure It Can Match Your Device Before Order..
Package Of 2Pcs Low Profile Wand Tilt Mechanism Only Used In 2" Horizontal Wood And Faux Wood Blinds With 1-1/2"(38Mm) By 2-1/4"(57Mm) Headrails..
The Tilter Has A Hexagon Shaped Gear Hole In The Center (This Means That The Metal Rod That Is Located Inside Of Your Blind's Headrail Must Be Hexagon Shaped In Order To Fit Inside Of The Gear.).
Features
- Warning: You'd better disassemble the existing wand tilter in your blinds and make it compare with the size and HEXAGON shape of our tilters. NOT FIT for the D-Shape or Square-Shape gear hole.
- The tilter has a HEXAGON shaped gear hole in the center (this means that the metal rod that is located inside of your blind's headrail MUST be hexagon shaped in order to fit inside of the gear.)
- The HEXAGON shaped gear hole in the center is 1/4(6.35mm) wide in diameter. ONLY Fit for the 2 horizontal wood and faux wood blinds with 1-1/2(38mm) by 2-1/4(57mm) headrails.
- Package of 2pcs Low profile wand tilt mechanism ONLY used in 2 horizontal wood and faux wood blinds with 1-1/2(38mm) by 2-1/4(57mm) headrails.
- Please kindly check the size in the picture and make sure it can match your device before order.
- See more on Amazon...
Brand: Cutelec | Manufacturer: Cutelec
Weight: 0.09 pounds
See On Amazon Similar To 2pcs 2 Low Profile Wand
#1
NEXCURIO Adhesive Sponge Holder Sink Caddy for Kitchen Accessories - SUS304 Stainless Steel Rust Proof Waterproof, Quick Drying (2 Pack)
Asin: B07PGPD1G4 | Model: NEXR-ASH | PartNumber: NEXR-ASH | Ean: 0673257555267 | UPC: 673257555267
Easy To Install, No Drilling: Just Peel Off The Protective Layer And Stick It On The Desired Position. It Is Important To Keep The Sink Dry And Clean Before Sticking..
Not Just As An Sponge Caddy For Kitchen Sink, But Also Can Be An Sink Organizer For Sink Strainer. Using It In Kitchen, Bathroom And Anywhere You Want..
Special Sponge Holder For Sink: Open Design Allows Water To Drain, Sponge Dry Quickly In Sink Without Leaving Outside Messes..
Size: 1.97 X 1.97 X 1.18 Inch. Dish Sponge Holder Will Not Take Much Space When You Are Washing Dishes Or Vegetables. Small Design But Multi-Functional..
Features
- Sink Sponge Holder are made of SUS304 stainless steel with brushed finish. Rustproof and Waterproof. Powerful adhesive can hold 8 lbs in daily use, more durable and stronger than suction cup.
- Size: 1.97 x 1.97 x 1.18 inch. Dish Sponge Holder will not take much space when you are washing dishes or vegetables. Small design but multi-functional.
- Easy to Install, No Drilling: Just peel off the protective layer and stick it on the desired position. It is important to keep the sink dry and clean before sticking.
- Special Sponge Holder for Sink: Open design allows water to drain, sponge dry quickly in sink without leaving outside messes.
- Not just as an Sponge Caddy for Kitchen Sink, but also can be an Sink Organizer for sink strainer. Using it in kitchen, bathroom and anywhere you want.
- See more on Amazon...
Brand: NEXCURIO | Manufacturer: NEXCURIO
Dimensions: 1.97 x 1.97 x 1.18 inches | Weight: 0.20 Pounds
See On Amazon #2
Retractable Gap Dust Cleaner Under Appliance Microfiber Duster Dust Brush with Extension Pole (36 to 49 inches) Cleaning Duster for Bed High Ceilings Furniture Bottom Household Gap Duster Gray
Asin: B0BDKSNY4K | Model: XY-GDC-G | PartNumber: XY-GDC-G | Ean: 0735209488556 | UPC: 735209488556
Under Appliance Microfiber Duster: Microfiber Cover Quickly & Easily Clean Large Surfaces: Generously Sized Microfiber Head Cleans Large Surfaces Quickly, Quickly Trap Dust, Lint, Bread Crumbs, Hair, Dirt So You Can Clean Effortlessly Traps And Holds Dust Without The Use Of Additional Cleaning Chemicals..
Widely Used: Retractable Gap Duster Brush Is Ideal For Kitchens, Laundry Rooms And Garages.It Can Be Used Wet Or Dry And Very Convenient And Durable. Save Your Time When Cleaning House With Excellent Duster Tool!.
Washable Gap Duster For Cleaning: The Microfiber Cloth Can Be Bendable And Washable, Simply Take Off The Microfiber Head For Hand Washing Or Machine Washing For Cycling Use. Cloth Cover Is Designed With Elastic Openings And Not Easy To Fall Off..
Free Bendable & Removable Head：Long Flat Flexible Cleaning Duster Is The Perfect Cleaning Tool For Hard To Reach Places. The Long Flat Profile Easily Glides Between And Under Kitchen Appliances, Washer, Dryer And Deep Cabinets..
Features
- Gap Duster Cleaner Long Pole The Length of the dust brush handle is adjustable can extend from 36" to 55", Made of stainless steel ,sturdy and durable.which accommodates different heights and cleaning tasks. Retractable gap dust cleaner are ideal for kitchens, laundry rooms and garages.
- Free Bendable & Removable Head Long Flat Flexible Cleaning Duster is the perfect cleaning tool for hard to reach places. The long flat profile easily glides between and under kitchen appliances, washer, dryer and deep cabinets.
- Under Appliance Microfiber Duster: Microfiber cover Quickly & Easily Clean Large Surfaces: Generously sized microfiber head cleans large surfaces quickly, quickly trap dust, lint, bread crumbs, hair, dirt so you can clean effortlessly traps and holds dust without the use of additional cleaning chemicals.
- Washable Gap Duster for Cleaning: The microfiber cloth can be bendable and washable, simply take off the microfiber head for hand washing or machine washing for cycling use. Cloth cover is designed with elastic openings and not easy to fall off.
- Widely Used: Retractable gap duster brush is ideal for kitchens, laundry rooms and garages.it can be used wet or dry and very convenient and durable. Save your time when cleaning house with excellent duster tool!
- See more on Amazon...
Brand: ARAINY | Manufacturer: ARAINY
Dimensions: 0.10 x 16.85 x 4.70 inches | Weight: 0.20 pounds
See On Amazon #3
2pcs Wand Tilter for 2" Low Profile Horizontal Blinds Tilt Mechanism Hook Connection with Square Shaped Gear Low Rail Blinds Accessory
Asin: B09WGXPMK2
Has A Square Shaped Gear Hole In The Center (This Means That The Metal Rod That Is Located Inside Of Your Blind's Headrail Must Be Square Shaped In Order To Fit Inside Of The Gear.).
Please Check What Shape Of The Metal Rod Located Inside Of Your Blind's Headrail Is Before Purchasing..
The Square Shaped Gear Hole In The Center Is 3/16Inch (4.1Mm) Wide In Diameter. For Detail Size ,Please Check The Picture Showing..
2Pcs 2" Low Rail Blinds Square Shaped Gear Hook Connections Fit The Headrail With The Size Of 1-1/2" X 2-1/4".
Features
- Warning: You'd better disassemble the existing wand tilter in your blinds and make it compare with the size and shape of our tilters. If it has difference,please don't palce the order in order to save money for you. Because it will not match.
- 2pcs 2 low rail blinds square shaped gear hook connections fit the headrail with the size of 1-1/2 x 2-1/4
- Has a square shaped gear hole in the center (this means that the metal rod that is located inside of your blind's headrail must be square shaped in order to fit inside of the gear.)
- The square shaped gear hole in the center is 3/16inch (4.1mm) wide in diameter. For detail size ,please check the picture showing.
- Please check what shape of the metal rod located inside of your blind's headrail is before purchasing.
- See more on Amazon...
Brand: Cutelec | Manufacturer: Cutelec
Weight: 0.09 Pounds
See On Amazon #4
2-Pack Blender Replacement Tamping tool Compatible with Vitamix classic Standard 64oz containers (2pcs)
Asin: B0BM4QYNWN | Model: 320mm | PartNumber: 320mm | Ean: 0749212586642 | UPC: 749212586642
〖Compatible With〗: Blender Replacement Parts Accessories Tamper For Vitamix Standard Container 64 Oz, For Blender Models 760 / 5000 / 5200 6300.
〖100% Lifeti Me Warranty〗: Customer Satisfaction Is Our Priority. If For Any Reason You're Not Completely Satisfied, You Can Ask For A Replacement Or Full Refund, No Questions Asked. Buy With Confidence..
〖Not Compatible With〗: Vitamix Standard Containers 48 Oz And 32 Oz. Not Compatible With Low-Profile Containers. Not Compatible With Containers With Self-Detect.
〖Includes〗: 2-Pack Classic Tamper Tool Compatible.Replacement Blender Accessories..
Features
- HIGH QUALITY :BPA-free plastic. Dishwasher Safe.
- INCLUDES : 2-Pack Classic Tamper Tool Compatible.replacement blender accessories.
- COMPATIBLE WITH : Blender replacement parts accessories tamper for Vitamix Standard Container 64 oz, for blender models 760 / 5000 / 5200 6300
- NOT COMPATIBLE WITH : Vitamix Standard Containers 48 oz and 32 oz. Not compatible with Low-Profile Containers. Not compatible with Containers with Self-Detect
- 100% LIFETI ME WARRANTY : Customer satisfaction is our priority. If for any reason you're not completely satisfied, you can ask for a replacement or FULL refund, no questions asked. Buy with confidence.
- See more on Amazon...
Brand: VGEFC | Manufacturer: VGEFC
See On Amazon #5
AXLIZER Wand Tilter 2pcs Heavy Duty Low Profile Wand Tilter Rod Tilter for 2 inch Horizontal Blinds, Square Shaped Gear/Hook Connection
Asin: B08W2Z69Z4 | Model: WTHDLPH-2 | PartNumber: WTHDLPH-2 | Ean: 0750225771857 | UPC: 750225771857
It Has A Square Gear Hole In The Center (Which Means The Metal Bar In The Shutter Bar Must Be Square To Fit Inside The Gear). Square Gear Inner Side Length:4.5Mm/0.17 Inch..
Packing List: The Package Includes Two Low Stick Tilters, Which Can Meet Your Daily Maintenance Needs. Suitable For 2-Inch Horizontal Louver, Square Gear, Hook Connection..
Specification: Blind Rod Control Tilter Is About 39Mm / 1.5 Inch In Width And 75Mm / 2.9 Inch In Height, Which Is Suitable For Most Horizontal Blinds. In Order To Install In The Gear, Please Confirm That The Louver Metal Bar Inside The Louver Head Rail Must Be Square..
You Just Need To Prepare The Tape Measure And Pliers. The Installation Process Is Very Simple And Easy To Replace: The Thin Wand Tilter Can Replace The Old One, So It Can Easily Repair The Blinds..
Features
- Made of high quality plastic and metal materials, with metal hook, it is durable, not easy to break or deform, can be used for a long time, suitable for internal installation.
- You just need to prepare the tape measure and pliers. The installation process is very simple and easy to replace: the thin wand tilter can replace the old one, so it can easily repair the blinds.
- It has a square gear hole in the center (which means the metal bar in the shutter bar must be square to fit inside the gear). Square Gear Inner Side Length:4.5mm/0.17 inch.
- Specification: blind rod control tilter is about 39mm / 1.5 inch in width and 75mm / 2.9 inch in height, which is suitable for most horizontal blinds. In order to install in the gear, please confirm that the louver metal bar inside the louver head rail must be square.
- Packing list: the package includes two low stick tilters, which can meet your daily maintenance needs. Suitable for 2-inch horizontal louver, square gear, hook connection.
- See more on Amazon...
Brand: AXLIZER | Manufacturer: AXLIZER
Weight: 0.07 pounds
See On Amazon #6
Blind Tilt Mechanism for 2" Horizontal Window Low Rail Wand Tilter with 7/32" Hexagon Shaped Gear Hook Connection, Low Rail Blinds Accessories for Wood or Faux Wood Blind Replacement Parts (2 Pack)
Asin: B0CN3BV6M7 | Model: 563233_1_MedzJkAIk | PartNumber: 563233_1_MedzJkAIk
Packing List - The Package Includes 2Pcs Low-Profile Wand Tilt Mechanisms Designed For Use In 2" Horizontal Wood And Faux Wood Blinds With Headrails Measuring 1-1/2" By 2-1/4". Please Carefully Check The Size Which In The Provided Picture..
Easy To Install - To Replace The Wand Tilter, You May Need A Tape Measure And Pliers. The Installation Process Is Straightforward And Easy. Simply Remove The Old Tilter And Replace It With The New One. This Allows For Quick And Hassle-Free Repair Of Your Window Blinds Faux Wood..
Durable To Use - The Blind Wand Tilt Mechanism Is Made Of High-Quality Plastic And Metal Materials, Ensuring Durability And Long-Term Use. It Features A Metal Hook For Added Strength And Is Suitable For Internal Installation..
Suitable For Hexagonal Metal Rods - The Tilter Features A Hexagon-Shaped Gear Hole At Its Center, Requiring The Metal Rod Inside Your Wood Blind's Headrail To Also Be Hexagon-Shaped To Fit Into The Gear. The Diameter Of The Hexagon-Shaped Gear Hole Is 1/4 Inch..
Features
- CAUTION - It is recommended that you disassemble the current wand tilter on your blinds and compare its size and shape with our tilters. If there are differences, please refrain from placing the order, as it may not be compatible.
- SUITABLE FOR HEXAGONAL METAL RODS - The tilter features a hexagon-shaped gear hole at its center, requiring the metal rod inside your wood blind's headrail to also be hexagon-shaped to fit into the gear. The diameter of the hexagon-shaped gear hole is 1/4 inch.
- PACKING LIST - The package includes 2pcs low-profile wand tilt mechanisms designed for use in 2 horizontal wood and faux wood blinds with headrails measuring 1-1/2 by 2-1/4. please carefully check the size which in the provided picture.
- DURABLE TO USE - The blind wand tilt mechanism is made of high-quality plastic and metal materials, ensuring durability and long-term use. It features a metal hook for added strength and is suitable for internal installation.
- EASY TO INSTALL - To replace the wand tilter, you may need a tape measure and pliers. The installation process is straightforward and easy. Simply remove the old tilter and replace it with the new one. This allows for quick and hassle-free repair of your window blinds faux wood.
- See more on Amazon...
Brand: Mozeat Lens | Manufacturer: MOZEAT LENS
See On Amazon #7
2pcs Tilt Mechanism Hook for 2" Low Profile Horizontal Blinds Wand Tilter Connection with Square Shaped Gear Low Rail Blinds Accessory
Asin: B0B3HBTJ5B | Model: ct258442 | PartNumber: ct258442
The Square Shaped Gear Hole In The Center Is 3/16Inch (4.5Mm) Wide In Diameter. For Detail Size ,Please Check The Picture Showing..
Please Check What Shape Of The Metal Rod Located Inside Of Your Blind's Headrail Is Before Purchasing..
Only Fit The Headrail With The Size Of 1-1/2" X 2-1/4".
Has A Square Shaped Gear Hole In The Center (This Means That The Metal Rod That Is Located Inside Of Your Blind's Headrail Must Be Square Shaped In Order To Fit Inside Of The Gear.).
Features
- Warning: You'd better disassemble the existing wand tilter in your blinds and make it compare with the size and shape of our tilters. If it has difference,please don't palce the order in order to save money for you. Because it will not match.
- Has a SQUARE shaped gear hole in the center (this means that the metal rod that is located inside of your blind's headrail must be SQUARE shaped in order to fit inside of the gear.)
- The SQUARE shaped gear hole in the center is 3/16inch (4.5mm) wide in diameter. For detail size ,please check the picture showing.
- ONLY Fit the headrail with the size of 1-1/2 x 2-1/4
- Please check what shape of the metal rod located inside of your blind's headrail is before purchasing.
- See more on Amazon...
Brand: Cutelec | Manufacturer: Cutelec
Dimensions: 0.94 x 3.20 x 1.70 Inches | Weight: 0.09 Pounds
See On Amazon #8
2pcs 1-1/2" Blinds Wand Tilter Mechanism with Square Gear 5/32" Hook Connection for Blinds headrail with Measure 1 3/8" x 1 9/16"
Asin: B0818HLF7F | Ean: 0606184427383 | UPC: 606184427383
Package Of 2Pcs Wand Tilt Mechanism Used For 1-1/2" Blinds Headrails That Measure 1 3/8" X 1 9/16" (35*40Mm) Only And Have A 5/32"(4Mm) Square-Shaped Tilt Rod..
Please Kindly Check The Size In The Picture And Make Sure It Can Match Your Device Before Order..
The Tilter Has A Square Shaped Gear Hole In The Center (This Means That The Metal Rod That Is Located Inside Of Your Blind's Headrail Must Be Square Shaped In Order To Fit Inside Of The Gear.) The Square Gear Hole In The Center Is 5/32" Wide In Diameter..
Features
- Warning: You'd better disassemble the existing wand tilter in your blinds and make it compare with the size and shape of our tilters. If it has difference,please don't palce the order in order to save money for you. Because the similar ones will not match.
- The tilter has a Square shaped gear hole in the center (this means that the metal rod that is located inside of your blind's headrail must be square shaped in order to fit inside of the gear.) The Square Gear hole in the center is 5/32 wide in diameter.
- Package of 2pcs wand tilt mechanism used For 1-1/2 blinds headrails that measure 1 3/8 x 1 9/16 (35*40mm) only and have a 5/32(4mm) square-shaped tilt rod.
- Please kindly check the size in the picture and make sure it can match your device before order.
- See more on Amazon...
Brand: Cutelec | Manufacturer: cuteLEC
Weight: 0.07 pounds
See On Amazon #9
High Profile 2" Plastic Wand Tilter for Horizontal Blinds 1ct - Square Rod Compatible, Durable Control Mechanism, by Amazing Drapery Hardware
Asin: B01B6SI560 | Model: 600612 | PartNumber: 600612 | Ean: 0714833821151 | UPC: 714833821151
Easy Installation: This 1-Pack Includes A Foot Fitting For Both 3/4" And 1" Headrail Punches, Ensuring Hassle-Free Installation With A Perfect Fit. Plus, The Simple Hook Connection Allows For Easy Attachment, Enhancing The Overall User-Friendly Experience..
Precise Control: This Innovative Control Mechanism Provides Precise Adjustment Of Blinds, Allowing For Optimal Light And Privacy Control With Effortless Ease..
Durable Materials: Crafted From High-Quality White Plastic And Metal, Offering Longevity And Reliable Performance..
Square Rod Gearing: Features A 1/4" Square Hole With A Robust Internal Plastic Gear For Efficient And Smooth Operation..
Features
- HIGH PROFILE WAND TILTER: Specifically designed for 2" wood and faux wood blinds, fitting headrails measuring 2" x 2 1/4".
- SQUARE ROD GEARING: Features a 1/4 square hole with a robust internal plastic gear for efficient and smooth operation.
- EASY INSTALLATION: This 1-pack includes a foot fitting for both 3/4 and 1 headrail punches, ensuring hassle-free installation with a perfect fit. Plus, the simple hook connection allows for easy attachment, enhancing the overall user-friendly experience.
- DURABLE MATERIALS: Crafted from high-quality white plastic and metal, offering longevity and reliable performance.
- PRECISE CONTROL: This innovative control mechanism provides precise adjustment of blinds, allowing for optimal light and privacy control with effortless ease.
- See more on Amazon...
Brand: Amazing Drapery Hardware | Manufacturer: Amazing Drapery Hardware
Dimensions: 3.00 x 6.00 x 6.00 inches | Weight: 0.04 Pounds
See On Amazon
Looking For Something Else?
Search