Five Oceans In-Line Bilge Blower, Boat Engine Blower, for 3-Inch Interior Diameter Vent Hose, 12-Volt, 130 CFM FO-4333
Asin: B07N95R76N | Ean: 0704831939750 | UPC: 704831939750
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easy Installation: Compact And Easily Installed On Any Flat Surface. Built-In Mounting Feet Allow Easy Vertical Or Horizontal Installation.
Specifications: Flow Capacity: 130 Cfm (Cubic Feet Per Minute). Current Draw: 2.5 Amp Draw. Fuse: 5 Amps. Voltage: 12 Volts. Intake Pipe Diameter: 3" (76Mm).
High Performance: Four-Blade Fan Maximizes Airflow And Efficiency. Very Low Current Draw, High Volume Airflow, Long Life. Designed For Efficient, And High-Output Operation.
Marine-Grade Materials: White Abs Plastic Housing Construction With Built-In Molded Mounting Bracket. This Blower Features Front And Rear Shaft Seals And Corrosion-Resistant Motor Housings For Long Life. Water-Resistant Motor Casing For Use In The Marine Environment.
Features
- APPLICATION: This In-Line Blower is for use with a 3-inch interior diameter vent hose. It Provides outstanding ventilation airflow for areas such as engine compartments, galleys, bilges, and heads
- MARINE-GRADE MATERIALS: White ABS plastic housing construction with built-in molded mounting bracket. This blower features front and rear shaft seals and corrosion-resistant motor housings for long life. Water-resistant motor casing for use in the marine environment
- EASY INSTALLATION: Compact and easily installed on any flat surface. Built-in mounting feet allow easy vertical or horizontal installation
- HIGH PERFORMANCE: Four-blade fan maximizes airflow and efficiency. Very low current draw, high volume airflow, long life. Designed for efficient, and high-output operation
- SPECIFICATIONS: Flow capacity: 130 CFM (Cubic Feet per minute). Current Draw: 2.5 Amp Draw. Fuse: 5 Amps. Voltage: 12 Volts. Intake Pipe Diameter: 3 (76mm)
- See more on Amazon...
Brand: Five Oceans
See On Amazon Similar To Five Oceans InLine Bilge Blower
#1
MAXZONE Automatic Submersible Boat Bilge Water Pump 12v 1100gph Auto with Float Switch (Blue - Automatic)
Asin: B072JKFV9Z | Model: HYBP1-G1100-02 | PartNumber: HYBP1-G1100-02 | Ean: 0191094860349 | UPC: 191094860349
Built-In Float Switch! (No Separate Float Switch Is Needed).
Equipped With Built In Electronic Controlled Reed Sensor System For Easy Fully Automatic Operation.
Tips: The Power Adapte Need To Choose 12V 8A.
No Power Use Until Pump Is Activated By Internal Float Switch (When Water Level Rises).
Wire Lead(M): 1M; Outlet Diameter: 29Mm/ 1.14 Inch (1-1/8"); Width: Approx. 81Mm.
Features
- Flow Rate (GPH): 1100GPH; Volt: 12V; Current(A): 3.8A; Head(M): 3.0M
- Wire Lead(M): 1m; Outlet Diameter: 29mm/ 1.14 Inch (1-1/8); Width: Approx. 81mm
- Built-in float switch! (No separate float switch is needed)
- No power use until pump is activated by internal float switch (when water level rises)
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
- Tips: the power adapte need to choose 12V 8A
- See more on Amazon...
Brand: MAXZONE | Manufacturer: Sailflo
Weight: 1.21 pounds
See On Amazon #2
SEAFLO 06 Series 750GPH Automatic Submersible Bilge Pump with Built-In Float Switch 12v - 4 Year Warranty
Asin: B013XR6W26 | Model: SFBP1-G750-06 | PartNumber: SFBP1-G750-06 | Ean: 0796793863945 | UPC: 796793863945
Automatic Operation: The Pump Activates When The Water Level Rises And Automatically Shuts Off Once The Water Is Removed. No Manual Intervention Required, Ensuring Peace Of Mind During Your Marine Adventures..
4 Year Warranty.
User-Friendly Installation: Connect The Brown-White Wire To The Positive (+) Terminal And The Black Wire To The Negative (-) Terminal For Automatic Functionality. The 18 Awg, 1M Long Leads Offer Flexibility In Installation..
Oil-Resistance: This Pump Is Designed To Handle Straight Motor Oil Without Activating, Keeping Your Bilge Free From Unwanted Pumping Due To Oil Presence..
Easy Maintenance: The Snap-Off Strainer Facilitates Effortless Cleaning, Ensuring Optimal Pump Performance. Keep Your Bilge Pump In Top Condition With Minimal Effort..
Automatic Operation: The Pump Activates When The Water Level Rises And Automatically Shuts Off Once The Water Is Removed. No Manual Intervention Required, Ensuring Peace Of Mind During Your Marine Adventures.The Float Switch's Hollow Design Enables Seamless Functionality. When The Water Level Rises Above 2” (50 Mm), The Pump Activates, And It Deactivates When The Water Level Drops To 3/4” (20) Mm Above The Strainer's Bottom Surface..
Current Details: Operates At 2.48A With A Maximum Amp Of 5A, Ensuring Efficient And Reliable Performance..
Embrace Worry-Free Boating With The Seaflo 750Gph Automatic Submersible Boat Bilge Water Pump. This All-In-One Pump And Float Switch Combo Eliminates The Need For An Additional Float Switch, Making It A Convenient And Efficient Choice For Marine Applications..
Features
- Voltage: 12V Flow Rate: 750 GPH Outlet Diameter: 3/4" (19mm)
- Embrace worry-free boating with the Seaflo 750GPH Automatic Submersible Boat Bilge Water Pump. This all-in-one pump and float switch combo eliminates the need for an additional float switch, making it a convenient and efficient choice for marine applications.
- Automatic Operation: The pump activates when the water level rises and automatically shuts off once the water is removed. No manual intervention required, ensuring peace of mind during your marine adventures.
- Automatic Operation: The pump activates when the water level rises and automatically shuts off once the water is removed. No manual intervention required, ensuring peace of mind during your marine adventures.The float switch's hollow design enables seamless functionality. When the water level rises above 2 (50 mm), the pump activates, and it deactivates when the water level drops to 3/4 (20) mm above the strainer's bottom surface.
- Oil-Resistance: This pump is designed to handle straight motor oil without activating, keeping your bilge free from unwanted pumping due to oil presence.
- Easy Maintenance: The snap-off strainer facilitates effortless cleaning, ensuring optimal pump performance. Keep your bilge pump in top condition with minimal effort.
- 4 Year Warranty
- User-Friendly Installation: Connect the brown-white wire to the positive (+) terminal and the black wire to the negative (-) terminal for automatic functionality. The 18 AWG, 1m long leads offer flexibility in installation.
- Current Details: Operates at 2.48A with a maximum amp of 5A, ensuring efficient and reliable performance.
- See more on Amazon...
Brand: SEAFLO | Manufacturer: SEAFLO
Dimensions: 4.00 x 5.70 x 3.20 inches | Weight: 1.17 Pounds
See On Amazon #3
Submersible Boat Bilge Water Pump 12v 1100gph Non-Automatic Marine Electric Bilge Pump for Ponds, Pools, Spas Silent, Boat Caravan RV Submersible
Asin: B07PGDKB5Y | Model: boating bilge pumps | PartNumber: boating bilge pumps
Typical Uses: Suitable For Hydraulic Systems Fed With Cold Water—Used In Line To Be Fed By Gravity Or Pressure.
Built For The Harsh Marine Environment, Are Suitable To Withstand The Most Adverse Condition. The Water-Cooled Engine Ensures A Long Service Life.
Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc.
Flow: 1100 Gallons Per Hour Or 5000 L / Hour, Head: 13 Ft (4Mts), Outlet Dia. 1-1/8" (29Mm).
Features
- Flow Rate: 1100 GPH; Voltage: 12 VDC
- Flow: 1100 gallons per hour or 5000 L / hour, Head: 13 Ft (4mts), Outlet Dia. 1-1/8 (29mm)
- Typical Uses: Suitable for hydraulic systems fed with cold water used in line to be fed by gravity or pressure
- Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc
- Built for the harsh marine environment, are suitable to withstand the most adverse condition. The water-cooled engine ensures a long service life
- See more on Amazon...
Brand: MAXZONE | Manufacturer: MAXZONE
Weight: 0.88 Pounds
See On Amazon #4
Maxzone Bilge Pump Installation Kit Bilge Pump Hose 1-1/8-Inch Dia Plumbing Kit | 6 FT Premium Quality Kink-free Flexible PVC Hose | Includes 2 Hose Clamps and Thru-Hull Fitting
Asin: B08TZZNHCY | Model: Bilge Pump Hose | PartNumber: Bilge Pump Hose
Cuff-Less Design With Smooth Inner Bore Prevents Leaks At Connection Ends. Easy To Cut To Any Desired Length. Ideal For Marine Or Freshwater Boating.
Please Verify Your Bilge Pump Outlet Size Before Purchase. Not For Use With Below Waterline Thru-Hull Connections..
Corrugated Helix, Kink-Proof Construction With An Excellently Tight Bend Radius Ensures Maximum Durability And Maintains A Steady Flow..
Kit Includes 6 Ft Of 1.125" Id (Inner Diameter) Hose, 2 Stainless Steel Worm Gear Hose Clamps, And 1 Thru Hull Connector..
Features
- Complete installation kit for bilge pumps with 1-1/8 inch outlet.
- Kit includes 6 FT of 1.125 ID (Inner Diameter) hose, 2 stainless steel worm gear hose clamps, and 1 thru hull connector.
- Cuff-less design with smooth inner bore prevents leaks at connection ends. Easy to cut to any desired length. Ideal for marine or freshwater boating
- Corrugated helix, kink-proof construction with an excellently tight bend radius ensures maximum durability and maintains a steady flow.
- Please verify your bilge pump outlet size before purchase. Not for use with below waterline thru-hull connections.
- See more on Amazon...
Brand: MAXZONE | Manufacturer: Sailflo MAXZONE
Dimensions: 12.50 x 8.00 x 4.00 inches | Weight: 1.50 pounds
See On Amazon #5
Sanuke 1100gph Bilge Pump Electric 12V Submersible Marine Water Pump Accessories Marin Boat , Low Noise
Asin: B07VKMTC9J | Ean: 0732130811682 | UPC: 732130811682
Ideal For Fishing Boats, Cruise Ship, Yachts, Etc..
Built For The Harsh Marine Environment, Are Suitable To Withstand The Most Adverse Condition. The Water-Cooled Engine Ensures A Long Service Life.
Impact Resistant Abs Housing, Stainless Steel Shafts, Rust Proof And Corrosion Resistant Easy-To-Clean Snap Lock Strainers.
Flow: 1100 Gallons Per Hour Or 5000 L / Hour, Head: 13 Ft (4Mts), Outlet Dia. 1-1/8" (29Mm) Typical Uses: Suitable For Hydraulic Systems Fed With Cold Water—Used In Line To Be Fed By Gravity Or Pressure Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc Built For The Harsh Marine Environment, Are Suitable To Withstand The Most Adverse Condition. The Water-Cooled Engine Ensures A Long Service Life.
Features
- Flow Rate: 1100 GPH; Voltage: 12 VDC
- Flow: 1100 gallons per hour or 5000 L / hour, Head: 13 Ft (4mts), Outlet Dia. 1-1/8 (29mm) Typical Uses: Suitable for hydraulic systems fed with cold water used in line to be fed by gravity or pressure Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc Built for the harsh marine environment, are suitable to withstand the most adverse condition. The water-cooled engine ensures a long service life
- Ideal for fishing boats, cruise ship, yachts, etc.
- Impact resistant ABS housing, stainless steel shafts, rust proof and corrosion resistant Easy-to-clean snap lock strainers
- Built for the harsh marine environment, are suitable to withstand the most adverse condition. The water-cooled engine ensures a long service life
- See more on Amazon...
Brand: Sanuke | Manufacturer: IENBOS
Dimensions: 4.00 x 3.00 x 3.00 inches | Weight: 0.86 Pounds
See On Amazon #6
Dontmiss Automatic Submersible Small Boat Bilge Pump 12v 1100gph Auto with Float Switch bilge pump for boat(Outlet Diameter 1 1/8") (1100GPH)
Asin: B0887X692V | Model: HYBP1-G1100-02 | PartNumber: HYBP1-G1100-02 | Ean: 0610406939202 | UPC: 610406939202
Built-In Float Switch! (No Separate Float Switch Is Needed).
No Power Use Until Pump Is Activated By Internal Float Switch (When Water Level Rises).
Flow Rate (Gph): 1100Gph; Volt: 12V; Current(A): 3.8A; Head(M): 3.0M.
Equipped With Built In Electronic Controlled Reed Sensor System For Easy Fully Automatic Operation.
Wire Lead(M): 1M; Outlet Diameter: 29Mm/ 0.95 Inch (1-1/8"); Width: Approx. 81Mm.
Features
- Automatic mode connection :Contect black wire to negative,Contect brown white wire to positive,,brown no wiring.Non-Automatic mode connection :Contect black wire to negative,Contect brown wire to positive,,brown white no wiring.
- Wire Lead(M): 1m; Outlet Diameter: 29mm/ 0.95 Inch (1-1/8); Width: Approx. 81mm
- Built-in float switch! (No separate float switch is needed)
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
- No power use until pump is activated by internal float switch (when water level rises)
- Flow Rate (GPH): 1100GPH; Volt: 12V; Current(A): 3.8A; Head(M): 3.0M
- See more on Amazon...
Brand: Dontmiss | Manufacturer: Dontmiss
Dimensions: 3.94 x 5.59 x 2.95 inches | Weight: 1.19 pounds
See On Amazon #7
attwood 4505-7 Sahara S500 Automatic Bilge Pump, 12-Volt, 1.5-Amp Draw, -Inch Interior Diameter Hose, 29-Inch 16-Gauge Wire, Unspecified
Asin: B001O0DEDU | Model: 4505-7 | PartNumber: 4505-7 | Ean: 0805646684917, 0012304706021, 0022697450579 | UPC: 022697450579, 805646684917, 012304706021
Also Convenient And Useful For Boats Of Any Size.
Comes With A 29-Inch Length Of 16-Gauge Caulked And Tinned Copper Wire, And Uses A ¾-Inch Interior Diameter Hose.
Installs Quickly And Easily In Tight Spaces, Mounts Horizontally Only.
12-Volt, 1.5-Amp Draw Pump Is Rated For 500 Gph Performance At Open Flow (At Voltage Of 13.6 Volts Dc).
Compact And Durable Package Includes Pump, Wire Seals, Strainer, And Mercury-Free Switch In One Unit.
Meets Automatic Switch Pump Requirements For Any Vessels 20 Feet And Over With Sleeping Accommodations.
Features
- Reliably provides bilge water pumping for boats of any size
- Meets automatic switch pump requirements for any vessels 20 feet and over with sleeping accommodations
- Also convenient and useful for boats of any size
- Compact and durable package includes pump, wire seals, strainer, and mercury-free switch in one unit
- Installs quickly and easily in tight spaces, mounts horizontally only
- 12-volt, 1.5-amp draw pump is rated for 500 GPH performance at open flow (at voltage of 13.6 volts DC)
- Comes with a 29-inch length of 16-gauge caulked and tinned copper wire, and uses a -inch interior diameter hose
- See more on Amazon...
First Available: 08/02/2010
Brand: Attwood | Manufacturer: Attwood
Dimensions: 8.12 x 7.37 x 7.75 inches | Weight: 0.80 pounds
See On Amazon #8
Attwood 1749-4 Turbo 4000 Series II in-Line Blower, for 4-Inch Interior Diameter Vent Hose, Water Resistant, 12-Volt
Asin: B003EX02DA | Model: 1749-4 | PartNumber: 1749-4
Ean: 0675904014660, 0022697174949, 0611104331046, 0757274282822, 0027204068254, 0696582465421, 0097914414429, 0042111147595, 0757274282815, 0796793583355
UPC: 757274282822, 675904014660, 042111147595, 027204068254, 796793583355, 696582465421, 757274282815, 022697174949, 611104331046, 097914414429
Provides Outstanding Ventilation Airflow For Areas Such As Engine Compartments, Galleys, Bilges, And Heads.
Note: Not For Use With Chemicals Or Fuels.
For 7/8" I.D. Thru-Hull.
Ideal For Livewell Drains.
The Blade Sweep And Pitch Are Engineered For A High Lift Coefficient, Resulting In Increased Airflow Speed For Optimized Ventilation.
Matches The Airflow Of Competitive In-Line Blowers With Significantly Reduced Noise Output.
Features A Patented, In-Line Design And The 5-Blade Fan Maximizes Airflow And Efficiency.
Brass Snaps And Plates.
Marine Ignition Protected And Has Built-In Mounting Feet For Easy Vertical Or Horizontal Installation.
Features
- 12-volt, water-resistant white blower intended for use with 4-inch interior diameter vent hose.
- Marine ignition protected and has built-in mounting feet for easy vertical or horizontal installation
- Provides outstanding ventilation airflow for areas such as engine compartments, galleys, bilges, and heads
- Features a patented, in-line design and the 5-blade fan maximizes airflow and efficiency
- The blade sweep and pitch are engineered for a high lift coefficient, resulting in increased airflow speed for optimized ventilation
- Matches the airflow of competitive in-line blowers with significantly reduced noise output
- For 7/8 I.D. thru-hull
- Ideal for livewell drains
- Brass snaps and plates
- Note: Not for use with chemicals or fuels
- See more on Amazon...
First Available: 03/08/2010
Brand: Attwood | Manufacturer: Attwood
Dimensions: 3.94 x 4.92 x 6.10 Inches | Weight: 1.00 Pounds
Warranty: 3 Year Limited Warranty
See On Amazon #9
Dontmiss Automatic Submersible small Boat Bilge Pump 12v 750gph Auto with Float Switch 3/4 inch (19mm) Outlet Dia, bilge pumps for boats
Asin: B07ZTZZHNP | Ean: 0610406938724 | UPC: 610406938724
No Power Use Until Pump Is Activated By Internal Float Switch (When Water Level Rises).
Flow Rate (Gph): 750Gph; Volt: 12V; Current(A): 3A; Head(M): 3.0M.
Built-In Float Switch! (No Separate Float Switch Is Needed).
Wire Lead(M): 1M; Outlet Diameter: 19Mm/ 3/4"; Width: Approx. 81Mm.
Equipped With Built In Electronic Controlled Reed Sensor System For Easy Fully Automatic Operation.
Features
- Automatic mode connection :Contect black wire to negative,Contect brown white wire to positive,,brown no wiring.Non-Automatic mode connection :Contect black wire to negative,Contect brown wire to positive,,brown white no wiring.
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
- No power use until pump is activated by internal float switch (when water level rises)
- Wire Lead(M): 1m; Outlet Diameter: 19mm/ 3/4; Width: Approx. 81mm
- Flow Rate (GPH): 750GPH; Volt: 12V; Current(A): 3A; Head(M): 3.0M
- Built-in float switch! (No separate float switch is needed)
- See more on Amazon...
Brand: Dontmiss | Manufacturer: Onechoices
Dimensions: 3.94 x 5.59 x 2.95 Inches
See On Amazon #10
Attwood 1733-4 Turbo 3000 Series in-Line Bilge Blower, for 3-Inch Interior Diameter Vent Hose, Water Resistant, 12-Volt
Asin: B001O0DE9E | Model: 1733-4 | PartNumber: 1733-4 | Ean: 0779421462277, 0022697173348, 0012302710907 | UPC: 779421462277, 012302710907, 022697173348
The Blade Sweep And Pitch Are Engineered For A High Lift Coefficient, Resulting In Increased Airflow Speed For Optimized Ventilation.
Do Not Operate In Area Of High Heat Over 160º F (71º C).
Up To Four Times More Efficient Than Competitive Blowers As It Draws Up To 40 Percent Fewer Amps.
Marine Ignition Protected And Has Built-In Mounting Feet For Easy Vertical Or Horizontal Installation.
System Airflow Exceeds Older-Style In-Line Blowers By As Much As 25 Percent.
Features A Patented, In-Line Design And The 5-Blade Fan Maximizes Airflow And Efficiency.
Features
- Provides outstanding ventilation airflow for areas such as engine compartments, galleys, bilges, and heads
- Features a patented, in-line design and the 5-blade fan maximizes airflow and efficiency
- The blade sweep and pitch are engineered for a high lift coefficient, resulting in increased airflow speed for optimized ventilation
- System airflow exceeds older-style in-line blowers by as much as 25 percent
- Up to four times more efficient than competitive blowers as it draws up to 40 percent fewer amps
- Marine ignition protected and has built-in mounting feet for easy vertical or horizontal installation
- Do not operate in area of high heat over 160 F (71 C)
- See more on Amazon...
First Available: 11/24/2008
Brand: Attwood | Manufacturer: Attwood
Dimensions: 5.75 x 11.25 x 11.50 Inches | Weight: 0.85 pounds
See On Amazon
Looking For Something Else?
Search