Funshowcase Cone Geometric Resin Silicone Mold 11-Cavity
Asin: B07MV2L5GH | Model: 2257 | PartNumber: 2257
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Essential Resin Casting Kit And Resin Jewelry Molds. Beginner Friendly. And Can Make With Various Of Materials ( Non-Food And Food ), Such As Soap, Candle, Wax, Plaster, Isomalt And More..
Transparent Soft Mold. Make Varied Heights Of Cones, Each Tray Contain 5 Size Heights Of Cavities, And You Can Make Varied Sizes Of Cones Within The Cavities Heights.
To Facilitate Removal Of The Finished Product Of A Complext Deep Mold, We Recommend To Demold It Under Running Water With Soap. Or Use Some Smooth Stuff ( Such As Film ) To Separate Mold And Finished Item, For Easy Release..
Make Varied Of Resin Art, Such As Landscape, Paperweight, Earrings, Necklace Pendant, Led Inlay Lamp, Ocean In Cone, Ring Cone, Orgone, Chakra Stone And More.
Features
- Cone-shaped Clear Silicone Mold 11-cavity
- Make varied of resin art, such as landscape, paperweight, earrings, necklace pendant, LED inlay lamp, ocean in cone, ring cone, orgone, chakra stone and more
- Essential resin casting kit and resin jewelry molds. Beginner friendly. And can make with various of materials ( non-food and food ), such as soap, candle, wax, plaster, isomalt and more.
- To facilitate removal of the finished product of a complext deep mold, we recommend to demold it under running water with soap. Or use some smooth stuff ( such as film ) to separate mold and finished item, for easy release.
- Transparent Soft Mold. Make varied heights of cones, each tray contain 5 size heights of cavities, and you can make varied sizes of cones within the cavities heights
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
See On Amazon Similar To Funshowcase Cone Geometric Resin Silicone
#1
Beads Resin Molds with Hole for Gemstone Cabochon Jewelry Casting 14-Count
Asin: B07GQYV391 | Model: 1299-1302 2147-2154 3870 3871 | PartNumber: 1299-1302 2147-2154 3870 3871
Resin Starter Kit. For Resin Casting ( Especially Resin Epoxy Casting ) , You Might Be Unable To Fill Full Of Resin At One Time, Wait The First Layer Harder And Fill Again The Top, Then Clean The Extra With Q-Tip. If Make More Then Dozen Of Resin Epoxy Beads, Purchase More Silicone Molds To Make In One Time, And Ensure A Fast Process..
6 Types Of Geometric Beads: Cube, Diamond Cube, Faceted Double Cone, Ellipse, Rondelle, Sphere Ball. Types Beads With 2 Different Sizes, Sphere And Cube With 3 Different Sizes. Make Varied Beads Around 0.3-0.7Inch, 14 Molds In Set..
You May Use With Varied Food And Non Food Materials If Use Wisely. You Can Observe The Manufacturing Process Clearly Through These Transparent Bead Mold..
Clear Crystal Beads Silicone Mold ( Smooth Finish ) For Jewelry Casting. Make Varied Of Resin Jewelry Accessories, Such As Keychain, Pendant, Charms, Pendant, Bracelet, Bangle, Earrings, Hair Sticks, Hair Accessory, Fan Tassel Accessory, Barrette Etc..
Features
- Mainly use with uv resin, resin epoxy, liquid clay, plaster, polymer clay, or soap ( recommend use softer type of clays or press clay before use for easy casting, and you can always mix types of materials )
- Clear crystal beads silicone mold ( smooth finish ) for Jewelry casting. Make varied of resin jewelry accessories, such as keychain, pendant, charms, pendant, bracelet, bangle, earrings, hair sticks, hair accessory, fan tassel accessory, barrette etc.
- Resin starter kit. For resin casting ( especially resin epoxy casting ) , you might be unable to fill full of resin at one time, wait the first layer harder and fill again the top, then clean the extra with q-tip. If make more then dozen of resin epoxy beads, purchase more silicone molds to make in one time, and ensure a fast process.
- You may use with varied food and non food materials if use wisely. You can observe the manufacturing process clearly through these transparent bead mold.
- 6 types of geometric beads: cube, diamond cube, faceted double cone, ellipse, rondelle, sphere ball. Types beads with 2 different sizes, sphere and cube with 3 different sizes. Make varied beads around 0.3-0.7inch, 14 molds in set.
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
See On Amazon #2
Cabochon Gem Jewelry Casting Epoxy Silicone Mold Triangle Oval Dome Teardrop Square Heart Round Irregular Stone Shapes, for Polymer Clay Craft, UV Resin Pendant Earrings Making, 2 in Set
Asin: B01N7F384C | Model: 1340 1341 | PartNumber: 1340 1341
Use With Modelling Clay (Air Clay, Paper Clay, Resin Clay, Polyclay, Polymer Clay, Salt Clay, Metal Clay, Liquid Clay Etc.), Resin(Epoxy Resin, Rethane Resin, Uv Resin, Polyester Resin), Concrete, Cement, Gypsum, Plaster, Hot Glue, Soap, Candle, Wax, Mix Media And More. Can Also Be Used With Food Material Such As Ice, Gum Paste, Jelly, Marzipan, Fondant, Sugarpaste, Melted Candy & Chocolate Etc..
Food Grade. Food And Non Food Material Should Use Separately. Wash And Boil Before Use, Especially For Food. Suffer Temperature Between -40~220 Centigrade / -40~428 Fahrenheit, Used With Most Materials For Baking And Crafting. Easy To Use Mold Very Flexible And Easy To Clean, Can Be Used In Oven, Dishwasher, Refrigerator Etc. Tip: Wash In Warm Soapy Water, And They Will Last For Years!.
Durable And Transparent Soft Mold, You Can Check The Buttom When Process Project. Easy To Demold, Shiny Finish. Demolding Tips: Add Baby Oil Or Butter To Mold Till Resin Dried, Twist It Then Figurine Will Pop Out!.
Jewelry Making Kit For 3D Gem, Necklace Pendant, Crystal, Jewels, Keychain Charm, Multi Shaped Gemstone, Earrings Etc..
Features
- Clear gem cabachon molds form 0.2 to 1.6inch, 176 cavities 38 designs. Clear mold allows you to better observe the manufacturing process.
- Jewelry making kit for 3D gem, necklace pendant, crystal, jewels, keychain charm, multi shaped gemstone, earrings etc.
- Use with modelling clay (air clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin, uv resin, polyester resin), concrete, cement, gypsum, plaster, hot glue, soap, candle, wax, mix media and more. Can also be used with food material such as ice, gum paste, jelly, marzipan, fondant, sugarpaste, melted candy & chocolate etc.
- Durable and transparent soft mold, you can check the buttom when process project. Easy to demold, shiny finish. Demolding tips: Add baby oil or butter to mold till resin dried, twist it then figurine will pop out!
- Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food. Suffer temperature between -40~220 centigrade / -40~428 fahrenheit, used with most materials for baking and crafting. Easy to use mold very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Tip: Wash in warm soapy water, and they will last for years!
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
Dimensions: 0.60 x 10.00 x 6.30 inches
See On Amazon #3
FUNSHOWCASE Resin Ring Silicone Mold for Liquid Clay Crafting, Resin Epoxy, Jewelry Making 24-Count
Asin: B07G5LVGGJ | Model: 1846-1854 1859-1873 | PartNumber: 1846-1854 1859-1873
Tips 1, Sanding After Release 2 If You Are Between Sizes, Order Up. Or You Can Always Trim And Drill The Released Product To Properly Fit Your Intended Figure. Tips 2, You May Add Resin To Mold With Dropper..
Create Personal Resin Rings With Ease. Since The Mold Is Reusable You Can Have Many Varieties And Styles - Save Time, Save Money, Look Great. Make With Kids, While Watching A Movie And Then Use At Weddings And Even Make Rings For All Bridesmaids..
To Make Us Ring Size Around 6(+): Sku1871, 1868, 1865, 1862, 1859, 1850; To Make Us Ring Size Around 6: Sku1872, 1869, 1866, 1863, 1860; To Make Us Ring Size Around 5(+): Sku1873, 1870, 1867, 1864, 1861, 1854, 1851,1848; To Make Us Ring Size Around 8(+): Sku1849, 1846; To Make Us Ring Size Around 10(+)：Sku 1852.
For Liquid Clay, Uv Resin, Epoxy Resin, Air Clay, Soap Etc. Crafting Jewelry Projects, You May Always Mix Different Materials When Crafting, And Use This Silicone Resin Mold To Make Ring For Pendant Charm, Or Drill A Tiny Hole To Make A Earring.
Diy Varied Sizes Resin Ring Jewelry Making Kit For Girls, Women, Men. You Can Observe The Manufacturing Process Clearly Through These Transparent Molds..
Features
- Clear silicone molds. Create varied statement resin rings crafting projects ( novelty resin ring band, DIY resin ring base, wood resin ring, dandelion resin ring, flower resin ring, feather resin ring, gold flakes resin ring, nature resin ring, ocean resin ring, resin ring pair, rose petals resin ring, silver flakes resin ring, landscape inside resin rings
- DIY varied sizes resin ring jewelry making kit for girls, women, men. You can observe the manufacturing process clearly through these transparent molds.
- Tips 1, Sanding after release 2 If you are between sizes, order up. Or you can always trim and drill the released product to properly fit your intended figure. Tips 2, You may add resin to mold with dropper.
- For liquid clay, uv resin, epoxy resin, air clay, soap etc. crafting jewelry projects, you may always mix different materials when crafting, and use this silicone resin mold to make ring for pendant charm, or drill a tiny hole to make a earring
- Create personal resin rings with ease. Since the mold is reusable you can have many varieties and styles - save time, save money, look great. Make with kids, while watching a movie and then use at weddings and even make rings for all bridesmaids.
- To make US ring size around 6(+): sku1871, 1868, 1865, 1862, 1859, 1850; To make US ring size around 6: sku1872, 1869, 1866, 1863, 1860; To make US ring size around 5(+): sku1873, 1870, 1867, 1864, 1861, 1854, 1851,1848; To make US ring size around 8(+): sku1849, 1846; To make US ring size around 10(+) sku 1852
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
See On Amazon #4
Funshowcase Eyeball Dome Silicone Molds 6-Count
Asin: B07HB3DTMX | Model: 2166 | PartNumber: 2166
Ways Of Making Eyeball, The Easiest Way Is To Place A Eye Ball Film At The Bottom Of The Mold. You May Try More Sophisticated By Printing After Mold Release. Then Add Clear Resin To Complete The Look. More Ways You May Email Before Purchase.
Transparent So You Can Check The Buttom When Process Project.
Essential Resin Casting Kit And Resin Jewelry Molds.
Clear Mold For Doll Eye Ball, Eye Ball Jewelry Making, Eyeball Bow Hair Clips, Gothic Eyeball Ring, Zombie Isomalt Eyes, Halloween Eyeball Cake Decoration, Monster Eye Ball Cupcake Topper, Mini Cookie, Scary Eyeball Paperweight And More.
Features
- Use or mix use with types of materials to make eyeballs, such as resin epoxy, uv resin, polymer clay, liquid clay, air clay, paper clay, resin clay, fondant, pastry, isomalt, chocolate, plaster, soap etc. if you use them wisely, you may use with more types of edible and non-edible materials
- Clear mold for doll eye ball, eye ball jewelry making, eyeball bow hair clips, Gothic eyeball ring, Zombie isomalt eyes, halloween eyeball cake decoration, monster eye ball cupcake topper, mini cookie, scary eyeball paperweight and more
- Ways of making eyeball, the easiest way is to place a eye ball film at the bottom of the mold. You may try more sophisticated by printing after mold release. Then add clear resin to complete the look. More ways you may email before purchase
- Essential resin casting kit and resin jewelry molds
- Transparent so you can check the buttom when process project
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
Weight: 0.04 pounds
See On Amazon #5
FUNSHOWCASE Miniature Succulent Flower Pot Resin Silicone Molds Set of 6 Mini Trays for Jewelry Casting Bracelet Charm Earrings Pendant Ring Ornament
Asin: B07SX6Q2DR | Model: 2501-2506 | PartNumber: 2501-2506
Use With Resin: Way1_Fill The Mold Full, Place The Other Part On Top Slowly, The Excess Will Go Out From The Hole. It Will Create Bubbles(Remove Them With A Stick), If Fill The Mold With Little Amount Of Resin..
Use With Clay/Fondant: Apply Small Amount Baby Oil/Oil/Shortening Before Use For Easy Release. And Trim Edges With Modelling Tools If Need. Stack Succulent Leaf/Flower Petal To Create A 3D Plant..
Way2_Use The Front Part Of Press Mold To Fill Resin, Wait Till Half Cure, Press It On Back Part. The Tiny Rose Flower Mold Can Make Delicate Roses That Is Hard To Be Made With Resin. If The 3Rd-Layer Petals Are Difficult To Balance, You May Put Them On The Silicone Dome Stand To Assemble..
Tiny 3D Transparent Rubber Molds Are Used With Varied Materials, Precious Metal Clay, Resin Clay, Air Clay, Paper Clay, Polymer Clay , Soap, Etc. And Make Varied Of Projects Jewelry Making (Bracelet, Charm, Earrings, Pendant, Ring Decoration And Ornament) , Nail Art, Dollhouse Miniature, Gum Paste Sugar Art And More.
Features
- Mini flower blossom Jewelry casting press clear soft UV resin molds, 12 pieces in set. Make 3D project around 0.47-0.86inch. Include succulents, rose, hydrangea bouquet, flower and planter
- Tiny 3D transparent rubber molds are used with varied materials, precious metal clay, resin clay, air clay, paper clay, polymer clay , soap, etc. And make varied of projects jewelry making (bracelet, charm, earrings, pendant, ring decoration and ornament) , nail art, dollhouse miniature, gum paste sugar art and more
- Use with resin: way1_fill the mold full, place the other part on top slowly, the excess will go out from the hole. It will create bubbles(remove them with a stick), if fill the mold with little amount of resin.
- Way2_use the front part of press mold to fill resin, wait till half cure, press it on back part. The tiny rose flower mold can make delicate roses that is hard to be made with resin. If the 3rd-layer petals are difficult to balance, you may put them on the silicone dome stand to assemble.
- Use with clay/fondant: Apply small amount baby oil/oil/shortening before use for easy release. And trim edges with modelling tools if need. Stack succulent leaf/flower petal to create a 3D plant.
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
See On Amazon #6
FUNSHOWCASE Round Disc Baking Silicone Mold 6-Cavity, 4inch 2-Bundle
Asin: B07NJJFGFK | Model: 2296=2 | PartNumber: 2296=2
Pinch Test Passed. No White Fillers When Pinched Or Twisted. No Chemical Coatings. Pure, Premium Quality Food-Grade Silicone. Meets Us Fda And Eu Lfgb Safety Standards. Bpa, Pvc And Phthalate Free. Easy To Use Mould Very Flexible And Easy To Clean, Can Be Used In Oven, Dishwasher, Refrigerator Etc. Used Within The Temperature Between -40~220 Centigrade.
For Crafts: Modelling Clay (Air Clay, Paper Clay, Resin Clay, Polyclay, Salt Clay, Metal Clay, Liquid Clay, Foam Clay, Wood Clay Etc.), Resin(Epoxy Resin, Rethane Resin, Uv Resin), Concrete, Cement, Plaster, Hot Glue, Soap, Candle, Wax, Cold Porcelain, Playdough, Mix Media And More. For Food Use: Candy Melt, Bonbons, Fondant, Chocolate, Ice, Gumpaste, Sugarpaste, Marzipan, Jelly, Isomalt Etc..
Dimensions 33X22.5X2cm ( 13X9x0.8 Inch ) , Each Hole 10X10x2cm ( 3.9X3.9X0.8 Inch 150Ml 5Oz ).
Made From 100% European Grade Silicone; Stronger, More Flexible And Durable To Maintain Its Original Shape And Non-Stick Quality Through More Uses.
Features
- 6-cavity disk soft tray. Make circle thriskellion plaques, orgonite, circular resin coasters, petri dish, disc cake, pie, custard, tart, almond flour buns, bread, pastry, jelly, cookies, baked egg, hamburger, muffin egg sandwiches, sponge base, candy, entremets, ice cream desserts etc.
- Made from 100% European grade silicone; stronger, more flexible and durable to maintain its original shape and non-stick quality through more uses
- Pinch test passed. No white fillers when pinched or twisted. No chemical coatings. Pure, premium quality food-grade silicone. Meets US FDA and EU LFGB safety standards. BPA, PVC and phthalate free. Easy to use mould very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Used within the temperature between -40~220 centigrade
- Dimensions 33x22.5x2cm ( 13x9x0.8 inch ) , each hole 10x10x2cm ( 3.9x3.9x0.8 inch 150ml 5oz )
- For crafts: modelling clay (air clay, paper clay, resin clay, polyclay, salt clay, metal clay, liquid clay, foam clay, wood clay etc.), resin(epoxy resin, rethane resin, uv resin), concrete, cement, plaster, hot glue, soap, candle, wax, cold porcelain, playdough, mix media and more. For food use: candy melt, bonbons, fondant, chocolate, ice, gumpaste, sugarpaste, marzipan, jelly, isomalt etc.
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
Dimensions: 1.18 x 8.86 x 12.99 inches | Weight: 0.79 Pounds
See On Amazon #7
Funshowcase Assorted Size Faceted Geometric Bangle Bracelet Jewelry Silicone Mold Wide, for Polymer Clay, Crafting, Resin Epoxy 3-Piece in Set
Asin: B01N7F3CYU | Model: 1342 | PartNumber: 1342
Transparent Molds Allow You To Better Observe The Manufacturing Process..
More Detail Please Check Description.
For Soap, Clay And Epoxy Resin Crafting Jewelry Projects Etc..
Dimension_Make Bracelet Inner Diameter Around 60Mm/2.36Inch, 62Mm/2.44Inch, 66Mm/2.6Inch.
Features
- Clear silicone molds. adult size large medium small.
- Dimension_make bracelet inner diameter around 60mm/2.36inch, 62mm/2.44inch, 66mm/2.6inch
- Transparent molds allow you to better observe the manufacturing process.
- For soap, clay and epoxy resin crafting jewelry projects etc.
- More detail please check description
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
Dimensions: 2.40 x 3.39 x 3.39 inches
See On Amazon #8
FUNSHOWCASE Resin Shaker Molds Set Mobile Phones Keychain Charm Pack of 8 Silicone Trays Seal Films Precision Tip Applicator Bottle Kit Bundle
Asin: B0CNRBQM1T | Model: 2926=5 3213 4805 4806-fun | PartNumber: 2926=5 3213 4805 4806-fun
Craft Ideas: Vintage Retro Necklace Pendant, Handmade 90S Themed Accessories, Diy Party Favor For Friends, Key Chain Charms, Jewelry Making Projects Etc..
Seal The Shaker With Clear Film. Stick With Uv Resin And So It Will Not Leak. The Film Can Be Cut In Varied Shapes As Your Need. With Mini Hole At Side For Filling Liquids..
Transparent Soft Mold, You Can Check The Bottom When Process Project. Easy To Demold, Gloss Finish.
Mainly Use With Uv Resin And Epoxy, Works With Other Materials Such As Modelling Clay (Air Dry Clay, Paper Clay, Resin Clay, Polyclay, Polymer Clay, Salt Clay, Metal Clay, Liquid Clay Etc.), Resin(Epoxy Resin, Rethane Resin, Uv Resin), Concrete, Cement, Plaster, Hot Glue, Soap, Candle, Wax, Play Dough, Cold Porcelain, Mix Media, Food Materials (Candy Melt, Boiled Sugar, Fondant, Chocolate, Ice, Gumpaste, Sugarpaste, Marzipan, Jelly, Isomalt Etc.) And More.
Beginner Friendly Supplies Make Cute Water Fall Jewelry Keychain Or Quicksand Bag Charms Or Snow Globe Effect Necklace Pendant, Or Cabochons On Phone Cases By Adding Glitter, Confetti, Sequins Embellishments, Floating Charms, Miniature, Rhinestones, Beads, Dried Flowers, Baby Oil/ Water/ Water + Glue/ Liquid (If You Want To Make Waterfall Effect) Or Anything Colorful, Kawaii, Sparkle.
Features
- Package include: 2 liquid shaker jewelry casting molds, make shapes of MP4 player, cell phone with rabbit ears, retro cellular phone with heart screen, and mini add-in charms (star, moon, leaf, cookie, apple, sparkle etc.); 1 needle tip squeeze bottle (13ml/0.44oz) for UV resin or glue or oil; 5 craft films; 8 tools in total
- Beginner friendly supplies make cute water fall Jewelry keychain or quicksand bag charms or snow globe effect necklace pendant, or cabochons on phone cases by adding glitter, confetti, sequins embellishments, floating charms, miniature, rhinestones, beads, dried flowers, baby oil/ water/ water + glue/ liquid (if you want to make waterfall effect) or anything colorful, kawaii, sparkle
- Craft ideas: vintage retro necklace pendant, handmade 90s themed accessories, DIY party favor for friends, key chain charms, jewelry making projects etc.
- Mainly use with UV resin and epoxy, works with other materials such as modelling clay (air dry clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin, uv resin), concrete, cement, plaster, hot glue, soap, candle, wax, play dough, cold porcelain, mix media, food materials (candy melt, boiled sugar, fondant, chocolate, ice, gumpaste, sugarpaste, marzipan, jelly, isomalt etc.) and more
- Seal the shaker with clear film. Stick with UV resin and so it will not leak. The film can be cut in varied shapes as your need. With mini hole at side for filling liquids.
- Transparent soft mold, you can check the bottom when process project. Easy to demold, gloss finish
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
Dimensions: 1.18 x 6.30 x 4.33 inches
Warranty: All products purchased have a 120-day warranty as standard. The warranty period begins on the day the product is originally shipped. The warranty covers all of the items and conditions identified in the original manufacturers warranty. Some of the items specifically not covered by the warranty are loss and theft, water damage, customer abuse.
See On Amazon #9
Funshowcase Necklace Pendant and Earrings Epoxy Silicone Molds with Hanging Holes, Jewelry Making Supply Set 45 Pack
Asin: B07MH7HC8N | Model: A1 | PartNumber: A1
Essential Epoxy Casting Kit And Jewelry Molds. Make Jewelry Earring, Pendant, Keychain, Interior And More. And Can Make With Various Of Materials (Non-Food And Food), Such As Epoxy, Clay, Air Clay, Concrete, Soap, Candle, Wax, Plaster, Isomalt, Mixed Media And More.
Easy To Use Mold Flexible And Easy To Clean, Used In Oven, Dishwasher, Refrigerator Etc. Used Within The Temperature Between -40~220 Centigrade. This Tool Will Help Bring Your Icing/Cake Decorating Skills To A New Level, Enabling You To Bring A Professional Quality To Your Work. Ideal For Use With A Wide Range Of Edible And Non Edible Materials, Including Sugarpaste, Petal Paste Or Marzipan. Great For Making Cake Toppers.
Assorted Of Gems And Jewels Are Around 1-3 Inch High.
You Can Observe The Manufacturing Process Clearing With These Highly Transparent Molds. Sometimes Trapped Bubbles Can Come Up To The Surface Later. Be Sure To Check Your Casting More Than Just 1 Time After Pouring For Any Additional Bubbles. And Do It In Section To Avoid Bubbles.
Features
- Lot crystal jewerly making kit set, total 45 pieces in pack. Includes 11 clear silicone molds of pendant and earrings, pinch bail connectors silver and gold 10-count, golden and siliver screw eye pins around 20-count, 1m (39inch) long 2mm wide silver plated and gold plated chain 2 links in total, black leather cord (snake chain) with clasp and extension 1-count, user manual. And e-book will be sent upon item order payment received
- You can observe the manufacturing process clearing with these highly transparent molds. Sometimes trapped bubbles can come up to the surface later. Be sure to check your casting more than just 1 time after pouring for any additional bubbles. And do it in section to avoid bubbles
- Essential epoxy casting kit and jewelry molds. Make jewelry earring, pendant, keychain, interior and more. And can make with various of materials (non-food and food), such as epoxy, clay, air clay, concrete, soap, candle, wax, plaster, isomalt, mixed media and more
- Assorted of gems and jewels are around 1-3 inch high
- Easy to use mold flexible and easy to clean, used in oven, dishwasher, refrigerator etc. Used within the temperature between -40~220 centigrade. This tool will help bring your icing/cake decorating skills to a new level, enabling you to bring a professional quality to your work. Ideal for use with a wide range of edible and non edible materials, including sugarpaste, petal paste or marzipan. Great for making cake toppers
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
Weight: 1.00 Pounds
See On Amazon #10
FUNSHOWCASE Pendulum Crystal Point Resin Silicone Molds 12-Count Jewelry Casting 220-Kits Set Filigree Cone Caps, Necklace Chains, Screw Eye Pins, Open Jump Rings
Asin: B07VMMXSTW | Model: 2185 2186 2281 2554 2602 2597 | PartNumber: 2185 2186 2281 2554 2602 2597
Dimension_Make Charms Height 40Mm-85Mm, Largest One 28X27x53mm, Smallest One 5X5x28mm.
Clear Molds, You May Easily See Through The Mold When Processing. And If You Are Using With Uv Resin, It Helps Light Pass Through Easily And Resin Cure In Instant..
Mainly Use With Resin(Epoxy Resin, Rethane Resin, Uv Resin), Concrete, Cement, Plaster, Most Of Modeling Clays(Resin Clay, Metal Clay, Polyclay, Bake Clay, Air Clay, Salt Clay, Recommend Use Softer Type Of Clays Or Press Clay Before Use For Easy Casting), And You Can Always Use Mix Media Materials. You Can Use For Food If Being Creative, For Varied Of Materials Such As Isomalt, Ice, Cheese, Cream And More..
Set Of 220 Kits_ Faceted Pendulum Molds With Hanging Holes 12-Count; Gold And Silver Hollow Metal Bead Caps 6-Count; Gold And Silver Necklace Chains 2-Count (100Cm Per Link); Gold And Silver Screw Eye Pins Around 100-Count; Open Jump Rings Gold And Silver Around 100-Count.
Features
- Transparent jewelry casting molds and metal accessories set. Make dowsing pendulum, meditation pendulum necklace, reiki healing charm, chakra keychain, faceted crystal earring, gemstone or quartz point ornaments, dowser scrying, crystal look crown, botanical paperweight, hair stick dangle, hand fan tassel accessory etc. Large mold may use for homemade soap or candle making
- Set of 220 kits_ faceted pendulum molds with hanging holes 12-count; gold and silver hollow metal bead caps 6-count; gold and silver necklace chains 2-count (100cm per link); gold and silver screw eye pins around 100-count; open jump rings gold and silver around 100-count
- Dimension_make charms height 40mm-85mm, largest one 28x27x53mm, smallest one 5x5x28mm
- Mainly use with resin(epoxy resin, rethane resin, uv resin), concrete, cement, plaster, most of modeling clays(resin clay, metal clay, polyclay, bake clay, air clay, salt clay, recommend use softer type of clays or press clay before use for easy casting), and you can always use mix media materials. You can use for food if being creative, for varied of materials such as isomalt, ice, cheese, cream and more.
- Clear molds, you may easily see through the mold when processing. And if you are using with uv resin, it helps light pass through easily and resin cure in instant.
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
Weight: 0.40 Pounds
See On Amazon #11
Funshowcase Fancy Fan Resin Casting Mold Stick with Thread and Nail Set
Asin: B07GPJVLPF | Model: 2140-2145 | PartNumber: 2140-2145
Package Include:1) Varied Sizes Of Craft Sticks, Height Around 2Inch(5Cm) To 8Inch(20Cm). Smallest Can Make Pendants,Earrings,Charms, While The Largest Can Make Real Size Hand Fans For Bridal Shower Gifts Or Wedding Favors. 2) Stretch Thread For Jewelry Making. 3) Nail (30Mm, 1.2Inch) And Nail Cap (7Mm, 0.2Inch). Package Includes All You Need For A Cute Vintage Look Or Asian Style Fan..
One Mold Includes 3 Cavities, Can Make Out Of 3 Folds. We Recommend To Make A 18-Paddle Fan For A "Not Too Loosed" Look. And Purchase 6 Pieces Molds Can Make The Paddles At The Same Time For A Fast Process. Thickness Of Each Stick Make Out Is Around 1.5-1.9Mm, We Do Not Recommend You Fill The Mold Full When Casting, Since It May Cover The Tiny Holes You Need To Thread With Cord..
You May Always Add Lots Of Nice Glitter And Additives, Decorate With Paintings, Types Of Jewelry Parts, Buttons, Tassels At Hand For A Unique Fan. Take Them As Wedding Program Fans Or Party Costume Accessory. Or Just A Unique And Quirky Jewelry Keychain Charm, Scrapbooking Decoration For The Mini Ones..
Mainly Use With Resin Epoxy, Liquidised Clay, Plaster, And You May Always Mix With Polymer Clay Or Air Clay Etc. For A Jewelry Making Project. Besides, You May Use With Isomalt For Cake Or Dessert Table Decoration. If You Use The Silicone Molds Wisely, You May Always Try Varied Food And Non-Food Materials ( Such As Types Of Chocolate, Candy Melts, Sugar Pastes, Icing, Clay, Soap, Wax Etc. ).
Features
- Clear rubber mold, make smooth finished hand fan handles. Make varied sizes of kawaii Japanese or French style resin fans.
- Mainly use with resin epoxy, liquidised clay, plaster, and you may always mix with polymer clay or air clay etc. for a jewelry making project. Besides, you may use with isomalt for cake or dessert table decoration. If you use the silicone molds wisely, you may always try varied food and non-food materials ( such as types of chocolate, candy melts, sugar pastes, icing, clay, soap, wax etc. )
- Package include:1) Varied sizes of craft sticks, height around 2inch(5cm) to 8inch(20cm). Smallest can make pendants,earrings,charms, while the largest can make real size hand fans for bridal shower gifts or wedding favors. 2) Stretch thread for jewelry making. 3) Nail (30mm, 1.2inch) and nail cap (7mm, 0.2inch). Package includes all you need for a cute Vintage look or Asian style fan.
- You may always add lots of nice glitter and additives, decorate with paintings, types of jewelry parts, buttons, tassels at hand for a unique fan. Take them as wedding program fans or party costume accessory. Or just a unique and quirky jewelry keychain charm, scrapbooking decoration for the mini ones.
- One mold includes 3 cavities, can make out of 3 folds. We recommend to make a 18-paddle fan for a not too loosed look. And purchase 6 pieces molds can make the paddles at the same time for a fast process. Thickness of each stick make out is around 1.5-1.9mm, we do not recommend you fill the mold full when casting, since it may cover the tiny holes you need to thread with cord.
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
See On Amazon #12
FUNSHOWCASE Jewelry Part Resin Epoxy Silicone Mold for Pendant Charm Keychain Crafting Projects 5-in-Set
Asin: B07D37JNKW | Model: 1906-1910 | PartNumber: 1906-1910
For Resin Casting, Use A Bright Led Light Helps To See Bubbles More Easily. Sometimes Trapped Bubbles Can Come Up To The Surface Later. Be Sure To Check Your Casting More Than Just 1 Time After Pouring For Any Additional Bubbles. And Do It In Section To Avoid Bubbles..
Food Grade. Food Grade And Non Food Grade Material Should Use Separately. Wash And Boil Before Use, Especially For Food..
Use Cotton Swab For Easy Cleaning The Extra ( Or Scissors Will Be Required For Triming The Finished Product ) . Release Spray Can Help De-Mold For Resin Projects. For Clay Projects After Baking, You May Try To Demold The Finished Product Under The Running Water With Soap For Easy Release. For Other Food Material, Such As Isomalt, The Filled Mold May Try To Place In Freezer For A Few Minutes To Avoid Distortion When De-Molding..
High Resoluction Transparent So You Can Check The Buttom When Process Project.
Features
- Clear jewelry making silicone molds with holes collection, for keychain, charm, ring, bracelet, hairclip mount, earring, studs making, DIY phone case etc. Mainly use for uv resin or resin epoxy, liquidize clay, soap etc. If you use it wisely, you may also use it with a wide range of edible and non edible materials.
- High resoluction transparent so you can check the buttom when process project
- For resin casting, use a bright LED light helps to see bubbles more easily. Sometimes trapped bubbles can come up to the surface later. Be sure to check your casting more than just 1 time after pouring for any additional bubbles. And do it in section to avoid bubbles.
- Use cotton swab for easy cleaning the extra ( or scissors will be required for triming the finished product ) . Release spray can help de-mold for resin projects. For clay projects after baking, you may try to demold the finished product under the running water with soap for easy release. For other food material, such as isomalt, the filled mold may try to place in freezer for a few minutes to avoid distortion when de-molding.
- Food Grade. Food Grade and Non Food Grade material should use separately. Wash and boil before use, especially for food.
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
Dimensions: 1.50 x 3.60 x 3.50 inches | Weight: 0.20 Pounds
See On Amazon #13
FUNSHOWCASE Vintage Frame Silicone Molds 6 Bundle Set 12-Cavity, for Sugar Paste, Chocolate, Fondant, Resin, Polymer Clay, Gumpaste, Wax
Asin: B018CJ3XHC | Model: 48 156 864 | PartNumber: 48 156 864 | Ean: 0702373634300 | UPC: 702373634300
For Crafts: Modelling Clay(Air Clay, Paper Clay, Resin Clay, Polyclay, Salt Clay, Metal Clay, Liquid Clay, Wood Clay Etc.), Resin(Epoxy Resin, Rethane Resin, Uv Resin), Concrete, Cement, Plaster, Hot Glue, Soap, Candle, Wax, Cold Porcelain, Mix Media And More. For Food Use: Candy Melt, Fondant, Chocolate, Ice, Gumpaste, Sugarpaste, Marzipan, Jelly, Isomalt Etc..
Food Grade. Food And Non Food Material Should Use Separately. Wash And Boil Before Use, Especially For Food. Easy To Use Mold Very Flexible And Easy To Clean, Can Be Used In Oven, Dishwasher, Refrigerator Etc. Can Be Used Within The Temperature Between -40~220 Centigrade / -40~428 Fahrenheit.
Durable And Reusable Soft Mold. Mold Color Is Randomly Sent..
6 Silicone Molds In Set, And 12 Cavities In Total. Assorted Sizes & Designs Of Frames. Cavities Measures Around 1-2 Inch Long/Tall..
Features
- Retro inspired photo frame or mirror frame silicone mould for sugarcraft, cake decorating, fondant,soap, chocolate, cake or cupcake or cookie toppers, cakesicle, resin cameo and jewelry casting, clay, candle embed, scrapbooking, keepsakes, craft DIY etc.
- 6 silicone molds in set, and 12 cavities in total. Assorted sizes & designs of frames. Cavities measures around 1-2 inch long/tall.
- For crafts: modelling clay(air clay, paper clay, resin clay, polyclay, salt clay, metal clay, liquid clay, wood clay etc.), resin(epoxy resin, rethane resin, uv resin), concrete, cement, plaster, hot glue, soap, candle, wax, cold porcelain, mix media and more. For food use: candy melt, fondant, chocolate, ice, gumpaste, sugarpaste, marzipan, jelly, isomalt etc.
- Durable and reusable soft mold. Mold color is randomly sent.
- Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food. Easy to use mold very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Can be used within the temperature between -40~220 centigrade / -40~428 fahrenheit
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
Dimensions: 1.10 x 6.18 x 5.51 inches | Weight: 0.30 Pounds
See On Amazon #14
FUNSHOWCASE Geometry Pendant Jewelry Casting Epoxy Silicone Molds with Holes for Concrete Plaster Polymer Clay, 6-Bundle 15-Cavity
Asin: B07MYXK2X5 | Model: 2289 | PartNumber: 2289
Perfect For Necklace, Keychain, Charm, Ring, Bracelet, Hairclip Mount, Earring, Studs Making, Diy Phone Case Etc. Mainly Use For Uv Resin Or Resin Epoxy Or Liquidize Clay Etc. If You Use It Wisely, You May Also Use It With A Wide Range Of Edible And Non Edible Materials.
Flexible And Easy To Clean, Can Be Used In Oven, Dishwasher, Refrigerator Etc.
Mainly Use With Modelling Clay (Air Clay, Paper Clay, Resin Clay, Polyclay, Polymer Clay, Salt Clay, Metal Clay, Liquid Clay Etc.), Resin(Epoxy Resin, Rethane Resin, Uv Resin, Polyester Resin), Concrete, Cement, Plaster, Hot Glue, Soap, Candle, Wax, Mix Media And More.
Easy To Demold, Shiny Finish.
Decorate With Tiny Metal Charms, Noble Crystals And Resin Accessories Create This Perfect Highgrade Look. Transparent So That Manufacturing Process Can Be Easily Observed.
Durable And Transparent Soft Mold, You Can Check The Bottom When Process Project.
Features
- UV resin jewellery casting trays 6-in-set, 15 cavities, each cavity Lenght 0.7-1.5inch. In varied geometrys shapes of molds sphere, teardrop, square, oval, rectangle, polygon, heart
- Durable and transparent soft mold, you can check the bottom when process project
- Perfect for necklace, keychain, charm, ring, bracelet, hairclip mount, earring, studs making, DIY phone case etc. Mainly use for uv resin or resin epoxy or liquidize clay etc. If you use it wisely, you may also use it with a wide range of edible and non edible materials
- Decorate with tiny metal charms, noble crystals and resin accessories create this perfect highgrade look. Transparent so that manufacturing process can be easily observed
- Mainly use with modelling clay (air clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin, uv resin, polyester resin), concrete, cement, plaster, hot glue, soap, candle, wax, mix media and more
- Easy to demold, shiny finish
- Flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
Warranty: New
See On Amazon #15
Funshowcase Button Resin Epoxy Silicone Mold
Asin: B07D374T7Y | Model: 1904 | PartNumber: 1904
For Resin Casting, Use A Bright Led Light Helps To See Bubbles More Easily. Sometimes Trapped Bubbles Can Come Up To The Surface Later. Be Sure To Check Your Casting More Than Just 1 Time After Pouring For Any Additional Bubbles. And Do It In Section To Avoid Bubbles..
Food Grade. Food And Non Food Material Should Use Separately. Wash And Boil Before Use, Especially For Food..
Use Cotton Swab For Easy Cleaning The Extra ( Or Scissors Will Be Required For Triming The Finished Product ) . Release Spray Can Help De-Mold For Resin Projects. For Clay Projects After Baking, You May Try To Demold The Finished Product Under The Running Water With Soap For Easy Release. For Other Food Material, Such As Isomalt, The Filled Mold May Try To Place In Freezer For A Few Minutes To Avoid Distortion When De-Molding..
High Resoluction Transparent So You Can Check The Buttom When Process Project.
Features
- Clear rubber molds. Assorted size of buttons silicone molds for keychain, charm, ring, bracelet, hairclip mount, earrings, studs making, DIY phone case etc. Use with a wide range of edible and non edible materials, such as resin epoxy, uv resin, concrete, plaster, candle, soap, wax, isomalt. For various of baking or crafting projects, such as jewelry making, wax accents, scrapbooking etc.
- High resoluction transparent so you can check the buttom when process project
- For resin casting, use a bright led light helps to see bubbles more easily. Sometimes trapped bubbles can come up to the surface later. Be sure to check your casting more than just 1 time after pouring for any additional bubbles. And do it in section to avoid bubbles.
- Use cotton swab for easy cleaning the extra ( or scissors will be required for triming the finished product ) . Release spray can help de-mold for resin projects. For clay projects after baking, you may try to demold the finished product under the running water with soap for easy release. For other food material, such as isomalt, the filled mold may try to place in freezer for a few minutes to avoid distortion when de-molding.
- Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food.
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
See On Amazon #16
FUNSHOWCASE Sphere Resin Epoxy Silicone Molds for Jewelry Casting, Candle Making, Wax, Homemade Soap, Bath Bomb Craft Assorted Size 8-Count
Asin: B07GPNMYG8 | Model: 1837-1841 2156 | PartNumber: 1837-1841 2156
Craft Tips: To Avoid Leakage, Seal The Mold With Hot Glue Or Resin, Then Pour Resin Into It. After Release, You May Trim With Blade The Middle If There Is Extra Resin ( Or Other Materials You Use With ) , And Sand ( Trimm ) The Top If Need. (While You May Cover The Top With A Bead Cap If You Are Making Resin Jewelry).
For Liquid Clay, Uv Resin, Epoxy Resin Crafting Jewelry Projects, Baking Etc. Resin Jewelry Making Kit..
Transparent So You Can Check The Buttom When Process Project.
Make Food Ice Spheres, Chocolate Ball, Raindrop Cake, 3D Flower Jelly Dome, Isomalt, Ice Cream, Hemisphere Mousse, Cereal Bowls Etc..
Features
- DIY projects with the clear rubber mold for geode bath bombs, glitter sphere charms, resin ball ornament gift, dragon balls, ball container, half-sphere paperweight, resin jewelry casting, keychain, water globe, snow globe, globe ring, dome rings, homemade soap making, spherical candle, round cabochons, crystal etc.
- Make food ice spheres, chocolate ball, raindrop cake, 3D flower jelly dome, isomalt, ice cream, hemisphere mousse, cereal bowls etc.
- Craft tips: To avoid leakage, seal the mold with hot glue or resin, then pour resin into it. After release, you may trim with blade the middle if there is extra resin ( or other materials you use with ) , and sand ( trimm ) the top if need. (while you may cover the top with a bead cap if you are making resin jewelry)
- Transparent so you can check the buttom when process project
- For liquid clay, uv resin, epoxy resin crafting jewelry projects, baking etc. Resin jewelry making kit.
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
See On Amazon #17
Funshowcase Cabochon Gem Resin Silicone Molds for Cake Decoration, Polymer Clay, UV Epoxy Urethane Polyresin Jewelry Making, Faceted and Round Domes Set of 2 Trays Circle Diameter 0.2-2.3inch
Asin: B07MV2F16K | Model: 2272 2273 | PartNumber: 2272 2273
Make Varied Of Resin Art, Such As Paperweight, Necklace Pendant, Chakra Stone, Eyes With Fursuits, Neat Photos, Cameo, Brooch, Hair Clips Or Earrings Decorations, Jewelry Making And Much More. Transparent Molds Allow You To Check Your Work During The Process..
Durable And Reusable Soft Tray.
For Crafts: Modelling Clay(Air Clay, Paper Clay, Resin Clay, Polyclay, Salt Clay, Metal Clay, Liquid Clay, Wood Clay Etc.), Resin(Acrylic Resin, Epoxy Resin, Rethane Resin, Uv Resin), Concrete, Cement, Plaster, Hot Glue, Soap, Candle, Wax, Cold Porcelain, Playdough, Mix Media And More.
For Food Use: Candy Melt, Fondant, Chocolate, Ice, Gumpaste, Sugarpaste, Marzipan, Jelly, Isomalt Etc..
Essential Resin Casting Kit And Resin Jewelry Molds. Beginner Friendly..
Use For Varied Of Resin ( Epoxy Resin, Rethane Resin, Uv Resin ) , Varied Of Clays ( Polyclay, Resin Clay, Air Clay, ) , Cement, Plaster, Soap, Candles, Wax, Hot Glue, Candy Melt, Isomalt, Chocolate And More.
Features
- Clear cabochon gem silicone molds, 2 trays faceted domes and cabochon domes, 62-cavity in total
- Use for varied of resin ( epoxy resin, rethane resin, uv resin ) , varied of clays ( polyclay, resin clay, air clay, ) , cement, plaster, soap, candles, wax, hot glue, candy melt, isomalt, chocolate and more
- Make varied of resin art, such as paperweight, necklace pendant, chakra stone, eyes with fursuits, neat photos, cameo, brooch, hair clips or earrings decorations, jewelry making and much more. Transparent molds allow you to check your work during the process.
- Essential resin casting kit and resin jewelry molds. Beginner friendly.
- For crafts: modelling clay(air clay, paper clay, resin clay, polyclay, salt clay, metal clay, liquid clay, wood clay etc.), resin(acrylic resin, epoxy resin, rethane resin, uv resin), concrete, cement, plaster, hot glue, soap, candle, wax, cold porcelain, playdough, mix media and more
- For food use: candy melt, fondant, chocolate, ice, gumpaste, sugarpaste, marzipan, jelly, isomalt etc.
- Durable and reusable soft tray
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
Warranty: New
See On Amazon #18
Funshowcase Round Coaster Resin Epoxy Silicone Mold
Asin: B07D3TVPGT | Model: 1898 | PartNumber: 1898
For Resin Casting, Use A Bright Led Light Helps To See Bubbles More Easily. Sometimes Trapped Bubbles Can Come Up To The Surface Later. Be Sure To Check Your Casting More Than Just 1 Time After Pouring For Any Additional Bubbles. And Do It In Section To Avoid Bubbles..
Dimension Around 3.46X3.46X0.43Inch, Make Round Disc Diameter 3.15Inch. Food Grade. Food And Non Food Material Should Use Separately. Wash And Boil Before Use, Especially For Food..
Use Cotton Swab For Easy Cleaning The Extra ( Or Scissors Will Be Required For Triming The Finished Product ) . Release Spray Can Help De-Mold For Resin Projects. For Clay Projects After Baking, You May Try To Demold The Finished Product Under The Running Water With Soap For Easy Release. For Other Food Material, Such As Isomalt, The Filled Mold May Try To Place In Freezer For A Few Minutes To Avoid Distortion When De-Molding..
High Resoluction Transparent So You Can Check The Buttom When Process Project.
Features
- Clear resin mold for coasters. Make petri dish coaster tile or candle holder. Use with a wide range of edible and non edible materials, such as resin epoxy, uv resin, concrete, plaster, candle, soap, wax, isomalt, fondant.
- High resoluction transparent so you can check the buttom when process project
- For resin casting, use a bright LED light helps to see bubbles more easily. Sometimes trapped bubbles can come up to the surface later. Be sure to check your casting more than just 1 time after pouring for any additional bubbles. And do it in section to avoid bubbles.
- Use cotton swab for easy cleaning the extra ( or scissors will be required for triming the finished product ) . Release spray can help de-mold for resin projects. For clay projects after baking, you may try to demold the finished product under the running water with soap for easy release. For other food material, such as isomalt, the filled mold may try to place in freezer for a few minutes to avoid distortion when de-molding.
- Dimension around 3.46x3.46x0.43inch, make round disc diameter 3.15inch. Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food.
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
See On Amazon #19
Funshowcase Beach Holiday Silicone Mold Cake Decorating for Sugarcraft, Fondant, Resin, Polymer Clay, Crafting Projects
Asin: B01123H6SM | Model: 770 | PartNumber: 770 | Ean: 0702373619901 | UPC: 702373619901
Color Is Randomly Sent.
Cavity Smaller Than 1Cm Is Not Good For Chocolate Use Or Require Higher Technique.
Easy To Use Mold Very Flexible And Non-Toxic, And Easy To Clean, Can Be Used In Oven, Dishwasher, Refrigerator Etc. Can Be Used Within The Temperature Between -40~220 Centigrade. Some Material ( Such As Clay, Paste Etc. ) May Extend A Bit When Pull Out Of The Mold.
Food Grade Warranty. Food Grade And Non Food Grade Material Should Use Separately. Wash And Boil Before Use, Especially For Food.
Demension Approximate. 8.2X8.1X1cm, Coconut Palm 2.5X1.2Cm, Swimsuit 2.2X1cm Sunglasses 2X0.6Cm Beach Umbralla 3X2.5 Shorts 2X1.5 Flip Flops 2X0.9Cm ( Each One ) Swim Goggles 1.6X0.9Cm Sun 3X3cm Fins 2X0.8Cm ( Each One ) Lifeguard Chair 3.5X1.8Cm.
Features
- Beach holiday silicone mold includes coconut palm, swimsuit, sunglasses, beach umbralla, shorts, flip flops, swim goggles, sun, fins, lifeguard chair. Perfect for cake decoration, clay and epoxy resin crafting projects etc.
- Demension approximate. 8.2x8.1x1cm, coconut palm 2.5x1.2cm, swimsuit 2.2x1cm sunglasses 2x0.6cm beach umbralla 3x2.5 shorts 2x1.5 flip flops 2x0.9cm ( each one ) swim goggles 1.6x0.9cm sun 3x3cm fins 2x0.8cm ( each one ) lifeguard chair 3.5x1.8cm
- Color is randomly sent
- Food Grade warranty. Food Grade and Non Food Grade material should use separately. Wash and boil before use, especially for food
- Cavity smaller than 1cm is not good for chocolate use or require higher technique
- Easy to use mold very flexible and non-toxic, and easy to clean, can be used in oven, dishwasher, refrigerator etc. Can be used within the temperature between -40~220 centigrade. Some material ( such as clay, paste etc. ) may extend a bit when pull out of the mold
- See more on Amazon...
Brand: FUNSHOWCASE | Manufacturer: FUNSHOWCASE
Dimensions: 0.39 x 3.23 x 3.23 inches
See On Amazon
Looking For Something Else?
Search