Brilliance Laser Inks 50 Grams Black Metal Marking Powder with Foam Brush | Permanent Durable High Contrast Laser Engraving Accessories for Fiber, YAG, and CO2 Laser Engraver BLI101MBPWD50
Asin: B07MHQRWGN | Model: BLI101MBPWD50 | PartNumber: BLI101MBPWD50 | Ean: 0706954235962 | UPC: 706954235962
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.๐จ ๐๐๐๐ ๐๐๐๐๐๐๐๐๐๐๐: Measure Powder, Add ๐๐๐ง๐๐ญ๐ฎ๐ซ๐๐ ๐๐ฅ๐๐จ๐ก๐จ๐ฅ In A ๐:๐ ๐ซ๐๐ญ๐ข๐จ. Ensure Thorough Mixing With The Included Brush For A Seamless Blend On A Clean Surface, Then Apply The Mixture To The Metal Surface.
๐งน ๐๐๐๐ ๐๐๐๐๐ ๐๐: The Innovative Formula Of This Metal Engraving Powder Easily Removes Excess Laser Markings On Metals. ๐ซ๐ข๐ง๐ฌ๐ Or ๐ฐ๐ข๐ฉ๐ Away From The Markings To Reveal A Durable And Intricate Design With Fine Lines.
โก ๐
๐๐๐ ๐๐๐๐๐๐: Our Laser Engraver Power Accessories Rapid Drying Formula Ensures It ๐๐ซ๐ข๐๐ฌ ๐ฐ๐ข๐ญ๐ก๐ข๐ง ๐ฃ๐ฎ๐ฌ๐ญ ๐ ๐๐๐ฐ ๐ฆ๐ข๐ง๐ฎ๐ญ๐๐ฌ. Accelerate Drying With A Heat Gun Or Hair Dryer For Seconds Results.
๐ฅ ๐๐๐๐๐ ๐๐๐๐๐๐๐๐๐๐๐๐๐: Compatible With ๐๐๐ (๐๐ ๐๐๐ญ๐ญ ๐ฆ๐ข๐ง๐ข๐ฆ๐ฎ๐ฆ), ๐
๐๐๐๐/๐๐๐ (๐๐ ๐๐๐ญ๐ญ), And ๐๐๐๐๐ (๐๐ ๐๐๐ญ๐ญ) ๐ฅ๐๐ฌ๐๐ซ๐ฌ, Making It A Versatile Solution For Various Laser Marking Machines, And An Alternative Of Laser Marking Spray.
Features
- : Our patented laser marking powder is formulated to revolutionize metal marking on uncoated metals like , , , ,
- : Compatible with ( ), / ( ), and ( ) , making it a versatile solution for various laser marking machines, and an alternative of laser marking spray
- : Measure powder, add in a : . Ensure thorough mixing with the included brush for a seamless blend on a clean surface, then apply the mixture to the metal surface
- : Our laser engraver power accessories rapid drying formula ensures it . Accelerate drying with a heat gun or hair dryer for seconds results
- : The innovative formula of this metal engraving powder easily removes excess laser markings on metals. or away from the markings to reveal a durable and intricate design with fine lines
- See more on Amazon...
Brand: Brilliance Laser Inks | Manufacturer: Brilliance Laser Inks
Weight: 0.25 pounds
See On Amazon Similar To Brilliance Laser Inks 50 Grams
#1
Brilliance Laser Inks 12 Oz Aerosol Laser Marking Spray and 50g Powder with Foam Brush, Black | Bundle of 2 Permanent High Contrast Metal Marking | Marks on Stainless Steel by Fiber, YAG, CO2 Laser
Asin: B0BVSFH7ZW
Brand: BRILLIANCE LASER INKS
See On Amazon #2
Brilliance Laser Inks 120ml Liquid Ready Red Copper Tone and 50g Laser Marking Powder Black Bundle with Foam Brush | Permanent High Contrast Metal Marking Tools for Fiber, YAG, and CO2 Laser Engraver
Asin: B0BZ9BZWRH
โ
Preval Ready Bottle: Pre-Measured Quantity In The Container For Convenience. Ready To Just Add Denatured Alcohol Or Similar Up The Second Arrow Mark. Mix/Shake Well. Install Preval Aerosol As Per The Manufactures Directions And Use It Just Like An Aerosol Spray..
โ
Multi Pack Discount: Get More Discount (Save With Our Bundle Options, Check Out Our Listings With Multi Packs. Also Available In Aerosol Spray Cans..
โ
General Guidelines/Settings: Scan Qr Code On Product Label To See Our Suggested Laser Settings In Our Faq Section Of Our Website. Co2 Laser - 25 Watt Minimum Required (100% P / 15-30% S / 500-700 Dpi). Fiber Laser - 10 Watt Minimum Required (@ 10 Watt Pwr / 50 Mm/Sec / 80-500 Q-Freq. / Dpi- 0.1Mm Hatch) Low Watt Diode Lasers Are Not Recommended..
โ
Foam Brush Included: Pre-Measured Quantity In The Container For Convenience. Ready To Just Add Denatured Alcohol Or Similar Up The First Arrow Mark. Mix/Shake Well, Use Foam Brush To Apply On The Substrate Surface, Apply A Thin Coat Using Left To Right Motion, As Long As You Do Not See Through The Surface.Use The Suggested Laser Settings In Our Faq Section As A Starting Guide Line Or Feel Free Call Our Technical Support Team..
Features
- 100% SATISFACTION GUARANTEE OR MONEY BACK: Settings and marking techniques may vary depending on the laser and metal product being marked. We can usually resolve most marking issues with simple setting adjustments. Please feel free to contact us directly.
- FOAM BRUSH INCLUDED: Pre-Measured quantity in the container for convenience. Ready to just add denatured alcohol or similar up the first arrow mark. Mix/Shake well, Use foam brush to apply on the substrate surface, apply a thin coat using left to right motion, as long as you do not see through the surface.Use the suggested laser settings in our FAQ section as a starting guide line or feel free call our Technical Support Team.
- PREVAL READY BOTTLE: Pre-Measured quantity in the container for convenience. Ready to just add denatured alcohol or similar up the second arrow mark. Mix/Shake well. Install Preval Aerosol as per the manufactures directions and use it just like an Aerosol Spray.
- GENERAL GUIDELINES/SETTINGS: Scan QR CODE on product label to see our suggested laser settings in our FAQ section of our website. CO2 LASER - 25 Watt Minimum Required (100% P / 15-30% S / 500-700 DPI). FIBER LASER - 10 Watt Minimum Required (@ 10 Watt PWR / 50 mm/sec / 80-500 Q-Freq. / DPI- 0.1mm Hatch) Low watt Diode Lasers are not recommended.
- MULTI PACK DISCOUNT: Get more discount (SAVE with our bundle options, check out our listings with multi packs. Also available in Aerosol Spray Cans.
- See more on Amazon...
Brand: Brilliance Laser Inks
See On Amazon ๏ปฟ
Looking For Something Else?
Search