Seamax Portable Boat Carry and Launch Hand Dolly Set with 16 Pneumatic Wheels
Asin: B01IGSI8LK | Ean: 0721541236894 | UPC: 721541236894
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Optional Hitch Attachment Is Available For Off-Road Towing With An Atv, Golf Cart, And Other Utility Vehicle. Max Towing Speed Is 10Km / Hour. It Is Great For Launching Your Boat To The Water Quickly. 10 Minutes To Assemble Or Disassemble. This Product Has Been Selling To Many Many Places Including Sail Club Or Yacht Club..
The Boat Hand Dolly Is Suitable For Many Use Cases. For Example, Carry Your Boat From The Parking Lot To The Boat Launching Lane In A Park. Carry Your Boat From Your Backyard To The Water. Move Your Boat Within The Yacht Club Or Sail Club. Users Shall Check The Max Pay Load (250 Lbs) And Speed (10 Km/Hour) Requirements. The Boat Hand Dolly Is Not For Regular Road / Highway Use. Boat Hand Dolly User Cannot Tow This Hand Dolly On The Road Or Highway By Vehicle For Any Of Purposes..
Tire Inflation: Dolly Tires May Not Be Fully Inflated When Shipping. Give Only 15-20 Psi Max Air Pressure In Room Temperature Before Using. Best To Use Portable Type Digital Control Air Pump To Avoid Over Inflation Issue..
Seamax Boat Hand Dolly Is Made By Steel With Power Coating. Quick Released Lock Pin To Change The Dolly Tongue Stages: 8Ft, 9Ft And Fully Extended 10Ft. Rear Bunks Width 38”. Dolly Payload 250 Lbs For Boat And Motor. Suggested Tire Air Pressure Is 15 Psi, Max 20 Psi. It Is Good For An Inflatable Boat Up To 13Ft, An Aluminum Or Fiberglass Boat Up To 14Ft, And A Small Sail Boat Up To 15Ft..
Features
- This lightweight adjustable universal boat hand dolly is equipped with a retracted main pole from 8' to fully extended 10', angle flexible rear bunks, and position adjustable front bow support bunk to carry the boat. The boat hand dolly weighs about 45 Lbs including two 16 Pneumatized wheels. The disassembled boat hand dolly can be fit into an easy carrying box with approximate 50" x 46" x 9" dimensions.
- Seamax Boat Hand Dolly is made by steel with power coating. Quick released lock pin to change the dolly tongue stages: 8ft, 9ft and fully extended 10ft. Rear Bunks Width 38 . Dolly Payload 250 Lbs for boat and motor. Suggested tire air pressure is 15 PSI, max 20 PSI. It is good for an inflatable boat up to 13ft, an aluminum or fiberglass boat up to 14ft, and a small sail boat up to 15ft.
- Optional hitch attachment is available for off-road towing with an ATV, golf cart, and other utility vehicle. Max towing speed is 10km / hour. It is great for launching your boat to the water quickly. 10 minutes to assemble or disassemble. This product has been selling to many many places including sail club or yacht club.
- Tire inflation: Dolly tires may not be fully inflated when shipping. Give only 15-20 PSI max air pressure in room temperature before using. Best to use portable type digital control air pump to avoid over inflation issue.
- The boat hand dolly is suitable for many use cases. For example, carry your boat from the parking lot to the boat launching lane in a park. Carry your boat from your backyard to the water. Move your boat within the yacht club or sail club. Users shall check the max pay load (250 Lbs) and speed (10 KM/Hour) requirements. The boat hand dolly is NOT for regular road / highway use. Boat hand dolly user cannot tow this hand dolly on the road or highway by vehicle for any of purposes.
- See more on Amazon...
Brand: Seamax | Manufacturer: Seamax Marine
Weight: 45.00 Pounds
See On Amazon Similar To Seamax Portable Boat Carry and
#1
SUP Hand Pump Max 27 PSI, Light Weight to Carry, Good for All Inflatable Paddle Board and Inflatable Boat
Asin: B07B85B3QG | Model: 4350267378 | PartNumber: 4350267378 | Ean: 0721541239475 | UPC: 721541239475
4.5Ft Air Hose With Hr Adapter For Halkey Roberts, Bravo, And Similar Types Of Air Valves.
Light Weight And Reliable Aluminum Inflator Shaft.
Built-In Air Pressure Gauge And Sand Protection Filter For Long Lasting Inflator Chamber.
Features
- Fast action and easy to reach higher pressure. Capacity: 2200 cubic cm. Pressure: 27.5 PSI / 1.8 BAR.
- Built-in air pressure gauge and sand protection filter for long lasting inflator chamber
- 4.5ft air hose with HR adapter for Halkey Roberts, Bravo, and similar types of air valves
- Light weight and reliable aluminum inflator shaft
- See more on Amazon...
Brand: Seamax | Manufacturer: Seamax Marine
Dimensions: 5.00 x 25.00 x 11.00 inches | Weight: 2.00 pounds
See On Amazon #2
Seamax Sup 16DB PRO Double Stage 16PSI Electric Air Pump with Built-in Battery for Inflatable SUP and Boat, Intelligent Firmware with Built-in Temperature Sensor and Timer
Asin: B08KTS3ZW6 | Model: SMX16DB-NEW | PartNumber: SMX16DB-NEW | Ean: 0352609235063, 0352609230396 | UPC: 352609230396, 352609235063
【More Compatible】: The Valve Connector With The Hose Is Suitable For Sups Equipped With Hr (Halkey-Roberts), Bravo, Naru, Or Similar Type Air Valves. This Kind Of Air Valve Has A Turning Pin Or Pressing Down The Pin In The Middle To Control The Valve’S Open & Closed Position. 3 Silicon O-Rings To Choose From And Keep The Connection Best Airtight. More Valve Adaptors Are Available And Even Fit The Leafield C7 Or D7 Air Valve..
【Note Of First Time Use】: Fully Charge The Battery Before Use. One Charge Can Inflate Up To 3X Sups Or 3X 12Ft Inflatable Boat. Don’T Leave The Pump In The Dusty Ground When Pumping. The Power Button Needs To Press & Hold For 2 Seconds To Turn On The Air Pump. The Pump Will Go To Sleep Mode (Turn Off) When No Use For 2 Minutes..
【Support And Not Support】: This Pump Can Support All Inflatable Sups, Inflatable Boats, And Inflatable Kites. But Our Pump May Not Support The Inflatable Kayak With The Boston Air Valve Except Customize The End Fitting..
【More Compact And More Features】: Fully Support Inflation And Deflation; 1St Stage Max Speed 350L/Min; 2Nd Stage Max Speed 70L/Min, Pressure Setting Increments 0.5 Psi And Max 16Psi.Built-In Led Flashlight And 2X Usb 5V Charging Ports, 6Lbs Super Lightweight, The Pump Comes With A Storage Box To Keep The Travel Charger And Car 12Vadadptor, 2 Ways To Use The Pump And Charge The Battery. A Great Design Travel Case To Keep The Pump And Accessories In Order..
【New And Smart】: Our Seamax Pump Has Ai Smart Monitoring Feature To Help The User Reach The Highest Efficiency Pumping. When The Pump Starts To Inflate, The Computer Monitors The Real-Time Pressure Every Second, Based On Our Self-Developed Smart Pump Formula Program, It Can Find The Pump The Best Timing To Switch To 2Nd The Computer Also Monitors The Pump’S Internal Temperature And Continued Working Time, Auto Stop Protection Feature Has Been Built-In To Protect Your Pump..
Features
- EASY TO POWER : Thanks to the intelligent control system and its newly designed power control unit, the air pump is great to use with the inflatable boat, SUP, and tent. This DC electric air pump can be powered by its built-in 6AH lithium battery after charging or through a standard extremal 12V charger socket in a vehicle. It can quickly reach and automatically stop at the user's pre-set air pressure.
- NEW AND SMART : Our Seamax pump has AI smart monitoring feature to help the user reach the highest efficiency pumping. When the pump starts to inflate, the computer monitors the real-time pressure every second, based on our Self-Developed smart pump formula program, it can find the pump the best timing to switch to 2nd The computer also monitors the pump s internal temperature and continued working time, Auto Stop Protection feature has been built-in to protect your pump.
- MORE COMPATIBLE : The valve connector with the hose is suitable for SUPs equipped with HR (Halkey-Roberts), Bravo, Naru, or similar type air valves. This kind of air valve has a turning pin or pressing down the pin in the middle to control the valve s Open & Closed position. 3 silicon O-Rings to choose from and keep the connection best airtight. More valve adaptors are available and even fit the Leafield C7 or D7 air valve.
- MORE COMPACT AND MORE FEATURES : Fully support Inflation and Deflation; 1st stage max speed 350L/min; 2nd stage max speed 70L/min, Pressure setting increments 0.5 PSI and Max 16PSI.Built-in LED flashlight and 2x USB 5V charging ports, 6Lbs Super lightweight, the pump comes with a storage box to keep the travel charger and car 12Vadadptor, 2 ways to use the pump and charge the battery. A great design travel case to keep the pump and accessories in order.
- NOTE OF FIRST TIME USE : Fully charge the battery before use. One charge can inflate up to 3x SUPs or 3x 12ft Inflatable Boat. Don t leave the pump in the dusty ground when pumping. The Power Button needs to Press & Hold for 2 seconds to turn on the air pump. The pump will go to sleep mode (turn off) when no use for 2 minutes.
- SUPPORT AND NOT SUPPORT : This pump can support all Inflatable SUPs, inflatable boats, and Inflatable Kites. but our pump may not support the inflatable kayak with the Boston air valve except customize the end fitting.
- See more on Amazon...
Brand: Seamax | Manufacturer: SEAMAX
Weight: 6.00 pounds
See On Amazon #3
Seamax Universal Sunlitec 3-Layers Welded Hull Storage and Carrying Bag with Reflective Edges for Foldable Inflatable Boat (Size B - for 360-390 Boats)
Asin: B07SBZ593S | Ean: 0721541240068 | UPC: 721541240068
Solid Design With Double Reinforced Handles With Cnc Sewing Reinforcement. Full Size 3X4 Cross Over Webbing For Heavy Weight Support. Quick Release Adjustable Buckles For Ease Of Use. Commercial Grade Design And Made..
New Sunlitec Fabric With Well Cnc Made: High-Performance Sunlitec Outer Layer, Micro-Poly Foam Middle Layer, And Polyester Inner Layer. This Exclusive New Material Can Provide More Strength And Better Durability, Better Temperature, And Water Resistance. Sewed By Cnc Machine And Seamax 2 Years Coverage To Protect Your Investment..
Full Protection For The Boat From Dragging It On The Ground. Double Storage Pockets For Added Convenience..
It’S Easy To Carry Your Boat In This Bag Because Of All The Handles. Specially Developed Upper And Lower Handles With A 4 Inches Gaps. Carry The Boat By The Lower Handles If The Boat Packs Up Small Or Use The Upper Handles If The Boat Is Large..
Features
- 4-sided bag with double side handles. There are 16 soft handles covered with reflective tape making it easy to grab the bag and carry the boat in any situation.
- It s easy to carry your boat in this bag because of all the handles. Specially developed upper and lower handles with a 4 inches gaps. Carry the boat by the lower handles if the boat packs up small or use the upper handles if the boat is large.
- Solid design with Double reinforced handles with CNC sewing reinforcement. Full size 3x4 cross over webbing for heavy weight support. Quick release Adjustable buckles for ease of use. Commercial grade design and made.
- Full protection for the boat from dragging it on the ground. Double storage pockets for added convenience.
- NEW SUNLITEC FABRIC WITH WELL CNC MADE: High-performance Sunlitec outer layer, micro-poly foam middle layer, and polyester inner layer. This exclusive new material can provide more strength and better durability, better temperature, and water resistance. Sewed by CNC machine and Seamax 2 years coverage to protect your investment.
- See more on Amazon...
Brand: Seamax | Manufacturer: Seamax Marine
Dimensions: 6.00 x 15.00 x 15.00 inches
See On Amazon #4
Seamax Marine Seamax Universal Sunlitec 3-Layers Welded Floorboard Storage Carrying Bag Inflatable Boat Reflective Edges Boat Reflective Handles (Size B:Suitable Boat Size 11.5-13ft #350-390)
Asin: B09D2JGRHJ | Ean: 0808887390913 | UPC: 808887390913
Strong Structure For Weight Carrying: Built-In 3 Main 2” Wide Bottom Nylon Webbing Holder Crossing The Entire Bag, Also Attached Four (4) 1.5” Reinforcement Webbing Lines At Each Side From The Holder Until The Handles To Disperse The Carrying Weight And Maximize The Bag Capacity. All Adjustment Webbing Straps Have The Back Reinforcement Through The Fabric.
New Sunlitec Fabric With Well Cnc Made: High-Performance Sunlitec Outer Layer, Micro-Poly Foam Middle Layer, And Polyester Inner Layer. This Exclusive New Material Can Provide More Strength And Better Durability, Better Temperature, And Water Resistance. Sewed By Cnc Machine And Seamax 2 Years Coverage To Protect Your Investment..
4 Ways Sturdy Handles: Attach 8 Units Of Fully Reinforced Soft Handles With Reflective Tape. Your Hands Can Reach Any Of The 2 Handles From Any Direction. The Reflective Added Feature Is Good For Night Vision. Max Carrying Weight Capacity Can Reach 220Lbs (100Kg). 4 Sizes To Choose From Suitable For A Foldable Inflatable Boat Up To 20Ft..
Solid Materia To Build: Provides 4X 1.5” Horizontal And 3X 2” Vertical Length Adjustable Tie-Up Webbing And Is Super Solid. With 2 Types Of Quick-Release Buckles, You Can Pack Up All The Boat Parts Into The Bag Quickly And Easily. Four Triangle Bag Conner With Sew-In Elastic Cord, Maximize The Bag Storage Performance And Secure All Contain. Included One Zipped Pocket 8X6x2 Inches Beside The Handle For Your Convenience..
Features
- COMMERCIAL GRADE QUALITY: Newly designed Seamax 4-Sided folding style Sunlitec floorboard carrying bag. Easy for packing and carrying your heavy floorboards and boat accessories. Marine Grade Sunlitec Fabric (MGSF) to build and provide 200% extra tear performance comparing traditional boat bags. Best Anti-UV technology and great water-resistant feature. Meets many commercial standards and make to last.
- SOLID MATERIA TO BUILD: Provides 4x 1.5 horizontal and 3x 2 vertical length adjustable tie-up webbing and is super solid. With 2 types of quick-release buckles, you can pack up all the boat parts into the bag quickly and easily. Four triangle bag conner with sew-in elastic cord, maximize the bag storage performance and secure all contain. Included one zipped pocket 8x6x2 inches beside the handle for your convenience.
- STRONG STRUCTURE FOR WEIGHT CARRYING: Built-in 3 main 2 wide bottom nylon webbing holder crossing the entire bag, also attached four (4) 1.5 reinforcement webbing lines at each side from the holder until the handles to disperse the carrying weight and maximize the bag capacity. All adjustment webbing straps have the back reinforcement through the fabric
- 4 WAYS STURDY HANDLES: Attach 8 units of fully reinforced soft handles with reflective tape. Your hands can reach any of the 2 handles from any direction. The reflective added feature is good for night vision. Max carrying weight capacity can reach 220Lbs (100KG). 4 sizes to choose from suitable for a foldable inflatable boat up to 20ft.
- NEW SUNLITEC FABRIC WITH WELL CNC MADE: High-performance Sunlitec outer layer, micro-poly foam middle layer, and polyester inner layer. This exclusive new material can provide more strength and better durability, better temperature, and water resistance. Sewed by CNC machine and Seamax 2 years coverage to protect your investment.
- See more on Amazon...
Brand: Seamax Marine | Manufacturer: Seamax Marine
See On Amazon #5
Seamax Marine SUP20D Electric Air Pump for Inflatable Paddle Board, Max 20 PSI, Additional Fittings Included, Pro Edition Built in Temperature Sensor and Voltage Meter Support Inflation and Deflation
Asin: B0747639TR | Ean: 0721541237846 | UPC: 721541237846
After Connecting With The Power, The Pump Will Be Turned On, Lcd Screen Is Showing The Reading Pressure. Press The Pressure Unit Button To Select The Pressure Unit Psi Or Bar. Use The Pressure Increase Button (+) Or Pressure Decrease Button (-) To Set Your Needed Pressure. The Range Of Pressure Value Is From 0.5 To 20Psi, (1Psi=0.0689Bar). Increasement Is 0.5 Psi. After Finishing The Above Steps, Press The Power On/Off Button To Start The Pump..
This Pump Has Built In A Digital Pressure Gauge To Do The Real Time Monitoring. When The Pressure Reading Can Reach The Pump Set Value, The Air Pump Will Stop Automatically. You Can Make Sure The Pressure Is Good Before You Disconnect The Air Hose From The Chamber. When The Application Is 20Psi, The Air Hose Connector Will Turn Very Tight When Disconnecting. This Is Normal..
During The Inflating Process, You Can Be Easy To Increase Or Reduce The Set Pressure Value Without Stopping The Current Pumping. Use The Unit Button To Switch The Pressure Reading In Any Time. Press The On/Off Button To Stop The Pump. Pump Maximum Continued Working Time Is 20 Minutes In Its Program, And The Pump Can Turn Off By Itself When 20 Minutes Reached. You Can Manually Turn On The Pump Once Again If You Need More Works..
Connect The End With Flexible Conduit Adaptor To The Nylon Air Hose (High Temperature Qualified) With The Pump Inflation Outlet And Twist Clockwise To Tighten It. Install The Supported Valve Adaptor To The Other End Of The Hose, And Twist Clockwise To Tighten It. Then Connect This Air Hose To The Chamber And Ready To Go..
Features
- This intelligent DC electric air pump with a Digital pressure LCD screen is the best pump for inflatable tent, SUP, and paddle board etc. Easy to Reach High Pressure, Engineered in Canada. Max pressure can reach 20 PSI (1.378 Bar /138 Kilo-Pascal) in about 15 minutes for an inflatable paddle board. This new single stage high efficient handy air pump is with our latest standard to build.
- Connect the end with Flexible conduit adaptor to the Nylon air hose (High Temperature Qualified) with the pump inflation outlet and twist clockwise to tighten it. Install the supported valve adaptor to the other end of the hose, and twist clockwise to tighten it. Then connect this air hose to the chamber and ready to go.
- After connecting with the power, the pump will be turned on, LCD screen is showing the reading pressure. Press the Pressure Unit button to select the pressure unit PSI or Bar. Use the Pressure Increase button (+) or Pressure Decrease button (-) to set your needed pressure. The range of pressure value is from 0.5 to 20PSI, (1PSI=0.0689BAR). Increasement is 0.5 PSI. After finishing the above steps, press the power On/Off button to start the pump.
- During the inflating process, you can be easy to increase or reduce the set pressure value without stopping the current pumping. Use the Unit button to switch the pressure reading in any time. Press the On/Off button to stop the pump. Pump maximum continued working time is 20 minutes in its program, and the pump can turn off by itself when 20 minutes reached. You can manually turn on the pump once again if you need more works.
- This pump has built in a digital pressure gauge to do the real time monitoring. When the pressure reading can reach the pump set value, the air pump will stop automatically. You can make sure the pressure is good before you disconnect the air hose from the chamber. When the application is 20PSI, the air hose connector will turn very tight when disconnecting. This is normal.
- See more on Amazon...
Brand: Seamax | Manufacturer: Seamax Marine
Weight: 3.00 Pounds
See On Amazon #6
Seamax Deluxe 4 by 4 Boat Launching Dolly with 14" Wheels System, Commercial Grade Quality for Inflatable Boat and Aluminum Boat Max Loading 600Lb
Asin: B00AWGS46E | Ean: 6924456528748
The Wheel Arm Has 60° And 90° Locking Position To Move Up And Down. The Upper-60° Position Can Free Up More Space On The Top And Side Of The Transom. The Lower 60° Position Lets The Wheels Run At The Same Level As The Prop, And Thus Turns The Wheels As A Prop Guard When Boat Launching..
Triple Heavy Duty, Triple Quality Made! Product Is Made By Seamax Canada With 2 Years Limited Warranty And 100% Customer Satisfaction Guaranteed! The Quick Operation Features Of The Deluxe Boat Dolly Include - Spring Load Locking Pin For Wheel Arm Position Adjustment; Solid Spring Load Buttons For Wheel Arm Length Adjustment; And Quick Released Lock Pin For Wheel Arm And Wheel Bearing..
The Transom Bracket Installation Area Is About 8 X 3 Inches. Shorter Transom Bracket Design Brings More Possible Installation For All Type Of Boats With Different Transom. The Brackets Can Be Installed At The Waterline Top Position, So To Avoid The Water Comes Into The Screw Holes. We Had Developed A Profile For The Transom Bracket In 2019. Now The Bracket Only Requires 2 Bolts To Install. Easier To Put It On Your Boat With The Same Loading Capacity..
Benefit Of Its New Design - With The 4 Stages Of Length And 4 Wheel Arm Position, The Dolly Can Be Adjusted While Afloat In The Boat, Leaving Or Coming Into The Dock. The Dolly System Can Also Bring Different Performance Positions For Boat Launching. The Wheel Arm Length Increment Is 2.5” Per Stage. Plus The Wheel’S Diameter, The Range Of Length Is 23 - 30 Inches. It Is A Great Add-On For Inflatable, Aluminum And Fiberglass Boats..
Features
- Designed by Seamax and now it is the 2nd edition released in 2019. Seamax Deluxe Boat Launching Wheels system is made by the marine grade T6 aluminum alloy with CNC processing and shiny looking anodized coating against the corrosion. Thus the product is good for saltwater use. Small parts are all made by solid stainless steel and reinforced Nylon. The air filled tire is lab-tested (1000 LBS), and is great to support a MAX loading of 600 LBS in all condition.
- BENEFIT of its new design - With the 4 stages of length and 4 wheel arm position, the dolly can be adjusted while afloat in the boat, leaving or coming into the dock. The dolly system can also bring different performance positions for boat launching. The wheel arm length increment is 2.5 per stage. Plus the wheel s diameter, the range of length is 23 - 30 inches. It is a great add-on for inflatable, aluminum and fiberglass boats.
- The wheel arm has 60 and 90 locking position to move up and down. The upper-60 position can free up more space on the top and side of the transom. The lower 60 position lets the wheels run at the same level as the prop, and thus turns the wheels as a prop guard when boat launching.
- The transom bracket installation area is about 8 x 3 inches. Shorter transom bracket design brings more possible installation for all type of boats with different transom. The brackets can be installed at the waterline top position, so to avoid the water comes into the screw holes. We had developed a profile for the transom bracket in 2019. Now the bracket only requires 2 bolts to install. Easier to put it on your boat with the same loading capacity.
- TRIPLE heavy duty, TRIPLE quality made! Product is made by Seamax Canada with 2 years limited warranty and 100% Customer Satisfaction guaranteed! The Quick Operation Features of the Deluxe Boat Dolly include - spring load locking pin for wheel arm position adjustment; solid spring load buttons for wheel arm length adjustment; and quick released lock pin for wheel arm and wheel bearing.
- See more on Amazon...
Brand: Seamax | Manufacturer: Seamax Marine
Dimensions: 13.00 x 25.00 x 7.00 inches | Weight: 16.00 pounds
See On Amazon #7
Seamax Deluxe Boat Launching Wheel System, Black Military Edition, 4 Positions and 4 Stages Removable and Adjustable Legs, 14" Pneumatic Wheels. Max Support Water Craft Weight 600Lbs
Asin: B082MSRZ5P | Ean: 0352609235001 | UPC: 352609235001
The Transom Bracket Installation Area Is About 8 X 3 Inches. Shorter Transom Bracket Design Brings More Possible Installation For All Type Of Boats With Different Transom. The Brackets Can Be Installed At The Waterline Top Position, So To Avoid The Water Comes Into The Screw Holes. We Had Developed A Profile For The Transom Bracket In 2019. Now The Bracket Only Requires 2 Bolts To Install. Easier To Put It On Your Boat With The Same Loading Capacity..
Our New Tires Are Now 14” In Diameter And About 4” Wide. They Are Made Of 4 Ply Reinforced Vehicle Grade Natural Rubber Which Holds Up Well Against Uv Rays, Heat And Salt Water For Up To Ten Years. To Prevent Air Loss, We Use An Advanced Butyl Inner Tube For Our Wheels With An “L” Style Cooper Air Valve. The Rim Is Made Of Reinforced Nylon With A 1” Diameter Hole For The Axle With No Bearing As This Product Is Made For Marine Use. These High Quality Marine Grade Tires And Rims Will Last You For.
Triple Heavy Duty, Triple Quality! Product Is Made By Seamax Canada With 2 Years Limited Warranty And 100% Customer Satisfaction Guaranteed! The Quick Operation Features Of The Deluxe Boat Dolly Include - Spring Load Locking Pin For Wheel Arm Position Adjustment; Solid Spring Load Buttons For Wheel Arm Length Adjustment; And Quick Released Lock Pin For Wheel Arm And Wheel Bearing..
The Wheel Arm Has 60° And 90° Locking Position To Move Up And Down. The Upper-60° Position Can Free Up More Space On The Top And Side Of The Transom. The Lower 60° Position Lets The Wheels Run At The Same Level As The Prop, And Thus Turns The Wheels As A Prop Guard When Boat Launching..
Features
- BENEFIT of its new design - With the 4 stages of length and 4 wheel arm position, the dolly can be adjusted while afloat in the boat, leaving or coming into the dock. The dolly system can also bring different performance positions for boat launching. The wheel arm length increment is 2.5 per stage. Plus the wheel s diameter, the range of length is 23 - 30 inches.
- The wheel arm has 60 and 90 locking position to move up and down. The upper-60 position can free up more space on the top and side of the transom. The lower 60 position lets the wheels run at the same level as the prop, and thus turns the wheels as a prop guard when boat launching.
- The transom bracket installation area is about 8 x 3 inches. Shorter transom bracket design brings more possible installation for all type of boats with different transom. The brackets can be installed at the waterline top position, so to avoid the water comes into the screw holes. We had developed a profile for the transom bracket in 2019. Now the bracket only requires 2 bolts to install. Easier to put it on your boat with the same loading capacity.
- TRIPLE heavy duty, TRIPLE quality! Product is made by Seamax Canada with 2 years limited warranty and 100% Customer Satisfaction guaranteed! The Quick Operation Features of the Deluxe Boat Dolly include - spring load locking pin for wheel arm position adjustment; solid spring load buttons for wheel arm length adjustment; and quick released lock pin for wheel arm and wheel bearing.
- Our new tires are now 14 in diameter and about 4 wide. They are made of 4 ply reinforced vehicle grade natural rubber which holds up well against UV rays, heat and salt water for up to ten years. To prevent air loss, we use an advanced butyl inner tube for our wheels with an L style cooper air valve. The rim is made of reinforced nylon with a 1 diameter hole for the axle with NO bearing as this product is made for marine use. These high quality marine grade tires and rims will last you for
- See more on Amazon...
Brand: Seamax | Manufacturer: Seamax Marine Canada
See On Amazon #8
Seamax Sunlitec Front Accessory Storage Bow Bag for Inflatable Boat, with Reflective Line - Size C for 15-20ft Boat
Asin: B07Q4S7P2W | Ean: 0721541239901 | UPC: 721541239901
Hidden Air Vents Located On The Bottom And Side Wall To Keep Your Items Safe And Dry..
Reflective Line For Night Vision.
Multiple Storage Pockets With Water Resistant Marine Zipper, One Large Pocket At The Top To Keep Your Map Or Your Foot Pump, 2 Pockets On The Front To Keep Your Food And Drinks And One Pocket Inside The Bag To Keep Your Boating Documents, Phone Or Wallet..
Features
- 4 Solid nylon webbing straps to install the Bow Bag via existing boat D rings, life line or boat handles. Fits virtually all brands of in atable boats. Quick release buckles on straps with a front carry handle.
- Multiple storage pockets with water resistant marine zipper, one large pocket at the top to keep your map or your foot pump, 2 pockets on the front to keep your food and drinks and one pocket inside the bag to keep your boating documents, phone or wallet.
- Hidden air vents located on the bottom and side wall to keep your items safe and dry.
- Reflective line for night vision
- See more on Amazon...
Brand: Seamax | Manufacturer: SEAMAX MARINE
Dimensions: 12.00 x 14.00 x 6.00 Inches | Weight: 3.00 Pounds
See On Amazon #9
Seamax Newest Version Aluminium Portable Boat Carry and Launching Hand Dolly Set with Handle
Asin: B08GS425QS | Ean: 0352609230150 | UPC: 352609230150
Tire Inflation: Dolly Tires May Not Be Fully Inflated When Shipping. Give Only 15-20 Psi Max Air Pressure In Room Temperature Before Using. Best To Use Portable Type Digital Control Air Pump To Avoid Over Inflation Issue..
Wash It With Fresh Water After Every Use From Salt Water Or Sandy Beach. Check Tire Pressure Before Every Using. Do Not Store The Wheels Directly Under The Sun Or Beside Any Heat Source To Extend Its Usable Longevity. Repaint And Lubricate The Dolly System When Necessary. Keep The Bolts, Lock Pin On The Dolly. 30 Days Free Replacement On Any Defective Parts. Product Available On Dec,2020.
The Boat Hand Dolly Is Suitable For Many Use Cases. For Example, Carry Your Boat From The Parking Lot To The Boat Launching Lane In A Park. Carry Your Boat From Your Backyard To The Water. Move Your Boat Within The Yacht Club Or Sail Club. Users Shall Check The Max Pay Load (250 Lbs) And Speed (10 Km/Hour) Requirements. The Boat Hand Dolly Is Not For Regular Road / Highway Use. Boat Hand Dolly User Cannot Tow This Hand Dolly On The Road Or Highway By Vehicle For Any Of Purposes..
Optional Hitch Attachment Is Available For Off-Road Towing With An Atv, Golf Cart, And Other Utility Vehicle. Max Towing Speed Is 10Km / Hour. It Is Great For Launching Your Boat To The Water Quickly. 10 Minutes To Assemble Or Disassemble. This Product Has Been Selling To Many Many Places Including Sail Club Or Yacht Club..
Features
- The new Seamax boat hand dolly is made by strong aluminium. Dolly Payload 250 Lbs for boat and motor. Suggested tire air pressure is 15 PSI, max 20 PSI. It is good for an inflatable boat up to 13ft, an aluminum or fiberglass boat up to 14ft, and a small sail boat up to 15ft.
- Optional hitch attachment is available for off-road towing with an ATV, golf cart, and other utility vehicle. Max towing speed is 10km / hour. It is great for launching your boat to the water quickly. 10 minutes to assemble or disassemble. This product has been selling to many many places including sail club or yacht club.
- Tire inflation: Dolly tires may not be fully inflated when shipping. Give only 15-20 PSI max air pressure in room temperature before using. Best to use portable type digital control air pump to avoid over inflation issue.
- The boat hand dolly is suitable for many use cases. For example, carry your boat from the parking lot to the boat launching lane in a park. Carry your boat from your backyard to the water. Move your boat within the yacht club or sail club. Users shall check the max pay load (250 Lbs) and speed (10 KM/Hour) requirements. The boat hand dolly is NOT for regular road / highway use. Boat hand dolly user cannot tow this hand dolly on the road or highway by vehicle for any of purposes.
- Wash it with fresh water after every use from salt water or sandy beach. Check tire pressure before every using. Do NOT store the wheels directly under the sun or beside any heat source to extend its usable longevity. Repaint and lubricate the dolly system when necessary. Keep the bolts, lock pin on the dolly. 30 days free replacement on any defective parts. Product Available on Dec,2020
- See more on Amazon...
Brand: Seamax | Manufacturer: Seamax Marine
Weight: 45.00 pounds
See On Amazon #10
Seamax EZ Load Boat Launching Wheels Set for Inflatable Boat & Aluminum Boat, Support MAX 500Lbs Loading with 12" Pneumatic Tire & 2 Height Position
Asin: B00A9KBR4Y | Ean: 0081175857019, 6955487258465 | UPC: 081175857019
Benefit From Its New Push Button Design & Max 3 Stages Wheel Arm, The System Can Be Adjusted While Afloat In The Boat Leaving Or Coming Into, It Can Also Bring Different Performance Position For Boat Launching. The Wheel Arm Length Increment Is 2.5” Per Stage, Plus The Wheel’S Diameter, The Range Of Length Is 22-28 Inches..
Maintenance: Wash It After Using From Salt Water Or Sandy Beach. Check Tire Pressure Before Every Using. Don’T Store The Wheels Under The Sun Or Beside The Heat To Maximize Its Life Time. Take The Wheel Arm Off From The Transom Bracket When Store Your Boat. Lube The Spring Load Dolly System Is Necessary. Keep The Lock Pin On The Dolly Bracket. Manufacturer 2 Years Parts Limited Warranty Within Usa & Canada. 30 Days Free Replacement On Any Defective Ransom Wheel Sets..
Tire Inflation: Dolly Tires May Not Be Fully Inflated When Shipping; Please Only Give 15-20 Psi Pressure At Room Temperature Before Using. Best To Use Portable Type Digital Air Pump In Case Tire Over Inflated. Tire Over Inflated Will Cause Damage And The Warranty Is Not Covered. Dual Wheel Kit Is Available For This Dolly For Heavy Loading Application..
This System Is Designed For Boats With Transom, The Length Of The Boat Should Not Exceed16 Ft & Total Weight Within 500 Lbs. These Transom Wheels Should Only Be Installed By An Adult With Some Experience In Working With Tools. To Install The Wheel Set Properly, You Will Need To Drill 4 Holes (5/16”) In The Transom For The Mounting. Addition Reinforcement May Be Required On Some Aluminum Transom. And You Can Use Marine Sealant And Suggested Sikaflex 291..
Features
- Seamax Easy Load Boat Launching Wheels Set is designed by Seamax Canada, made by hardest marine grade T6 aluminum alloy with CNC processing; Shiny looking anodized coating on all aluminum parts, product is good for saltwater using; Small parts are all made by solid stainless steel. Lab 1000Lbs tested, support MAX 500Lbs loading in all condition, good for inflatable boats, aluminum boats and fiberglass boats.
- This system is designed for boats with transom, the length of the boat should not exceed16 FT & total weight within 500 Lbs. These transom wheels should only be installed by an adult with some experience in working with tools. To install the wheel set properly, you will need to drill 4 holes (5/16 ) in the transom for the mounting. Addition reinforcement may be required on some aluminum transom. And you can use marine sealant and suggested Sikaflex 291.
- Benefit from its new Push Button design & max 3 stages wheel arm, the system can be adjusted while afloat in the boat leaving or coming into, it can also bring different performance position for boat launching. The wheel arm length increment is 2.5 per stage, plus the wheel s diameter, the range of length is 22-28 inches.
- Tire inflation: Dolly tires may not be fully inflated when shipping; please only give 15-20 PSI pressure at room temperature before using. Best to use portable type digital air pump in case tire over inflated. Tire over inflated will cause damage and the warranty is not covered. Dual wheel kit is available for this dolly for heavy loading application.
- Maintenance: Wash it after using from salt water or sandy beach. Check tire pressure before every using. Don t store the wheels under the sun or beside the heat to maximize its life time. Take the wheel arm off from the transom bracket when store your boat. Lube the spring load dolly system is necessary. Keep the lock pin on the dolly bracket. Manufacturer 2 years Parts Limited Warranty within USA & Canada. 30 days free replacement on any defective ransom wheel sets.
- See more on Amazon...
Brand: Seamax | Manufacturer: Seamax Marine
Dimensions: 16.00 x 26.00 x 5.00 inches | Weight: 15.00 pounds
See On Amazon #11
Seamax Marine Universal Sunlitec 3-Layers Welded Floorboard Storage and Carrying Bag for Inflatable Boat with Reflective Edges (Size A:Suitable for Boat Size 8-11ft #230-330)
Asin: B09D2DJXFY | Model: FloorBag-A | PartNumber: FloorBag-A | Ean: 0808887396465 | UPC: 808887396465
Strong Structure For Weight Carrying: Built-In 3 Main 2” Wide Bottom Nylon Webbing Holder Crossing The Entire Bag, Also Attached Four (4) 1.5” Reinforcement Webbing Lines At Each Side From The Holder Until The Handles To Disperse The Carrying Weight And Maximize The Bag Capacity. All Adjustment Webbing Straps Have The Back Reinforcement Through The Fabric.
New Sunlitec Fabric With Well Cnc Made: High-Performance Sunlitec Outer Layer, Micro-Poly Foam Middle Layer, And Polyester Inner Layer. This Exclusive New Material Can Provide More Strength And Better Durability, Better Temperature, And Water Resistance. Sewed By Cnc Machine And Seamax 2 Years Coverage To Protect Your Investment..
4 Ways Sturdy Handles: Attach 8 Units Of Fully Reinforced Soft Handles With Reflective Tape. Your Hands Can Reach Any Of The 2 Handles From Any Direction. The Reflective Added Feature Is Good For Night Vision. Max Carrying Weight Capacity Can Reach 220Lbs (100Kg). 4 Sizes To Choose From Suitable For A Foldable Inflatable Boat Up To 20Ft..
Solid Materia To Build: Provides 4X 1.5” Horizontal And 3X 2” Vertical Length Adjustable Tie-Up Webbing And Is Super Solid. With 2 Types Of Quick-Release Buckles, You Can Pack Up All The Boat Parts Into The Bag Quickly And Easily. Four Triangle Bag Conner With Sew-In Elastic Cord, Maximize The Bag Storage Performance And Secure All Contain. Included One Zipped Pocket 8X6x2 Inches Beside The Handle For Your Convenience..
Features
- COMMERCIAL GRADE QUALITY: Newly designed Seamax 4-Sided folding style Sunlitec floorboard carrying bag. Easy for packing and carrying your heavy floorboards and boat accessories. Marine Grade Sunlitec Fabric (MGSF) to build and provide 200% extra tear performance comparing traditional boat bags. Best Anti-UV technology and great water-resistant feature. Meets many commercial standards and make to last.
- SOLID MATERIA TO BUILD: Provides 4x 1.5 horizontal and 3x 2 vertical length adjustable tie-up webbing and is super solid. With 2 types of quick-release buckles, you can pack up all the boat parts into the bag quickly and easily. Four triangle bag conner with sew-in elastic cord, maximize the bag storage performance and secure all contain. Included one zipped pocket 8x6x2 inches beside the handle for your convenience.
- STRONG STRUCTURE FOR WEIGHT CARRYING: Built-in 3 main 2 wide bottom nylon webbing holder crossing the entire bag, also attached four (4) 1.5 reinforcement webbing lines at each side from the holder until the handles to disperse the carrying weight and maximize the bag capacity. All adjustment webbing straps have the back reinforcement through the fabric
- 4 WAYS STURDY HANDLES: Attach 8 units of fully reinforced soft handles with reflective tape. Your hands can reach any of the 2 handles from any direction. The reflective added feature is good for night vision. Max carrying weight capacity can reach 220Lbs (100KG). 4 sizes to choose from suitable for a foldable inflatable boat up to 20ft.
- NEW SUNLITEC FABRIC WITH WELL CNC MADE: High-performance Sunlitec outer layer, micro-poly foam middle layer, and polyester inner layer. This exclusive new material can provide more strength and better durability, better temperature, and water resistance. Sewed by CNC machine and Seamax 2 years coverage to protect your investment.
- See more on Amazon...
Brand: Seamax Marine | Manufacturer: Seamax Marine
See On Amazon #12
Seamax Deluxe 4x4 Boat Launching Dolly with 14" Wheels System, Commercial Grade Quality for Inflatable Boat & Aluminum Boat
Asin: B08NFWC8DF | Ean: 0808887260759 | UPC: 808887260759
The Wheel Arm Has 60° And 90° Locking Position To Move Up And Down. The Upper-60° Position Can Free Up More Space On The Top And Side Of The Transom. The Lower 60° Position Lets The Wheels Run At The Same Level As The Prop, And Thus Turns The Wheels As A Prop Guard When Boat Launching..
Triple Heavy Duty, Triple Quality! Product Is Made By Seamax Canada With 2 Years Limited Warranty And 100% Customer Satisfaction Guaranteed! The Quick Operation Features Of The Deluxe Boat Dolly Include - Spring Load Locking Pin For Wheel Arm Position Adjustment; Solid Spring Load Buttons For Wheel Arm Length Adjustment; And Quick Released Lock Pin For Wheel Arm And Wheel Bearing..
The Transom Bracket Installation Area Is About 8 X 3 Inches. Shorter Transom Bracket Design Brings More Possible Installation For All Type Of Boats With Different Transom. The Brackets Can Be Installed At The Waterline Top Position, So To Avoid The Water Comes Into The Screw Holes. We Had Developed A Profile For The Transom Bracket In 2019. Now The Bracket Only Requires 2 Bolts To Install. Easier To Put It On Your Boat With The Same Loading Capacity..
Benefit Of Its New Design - With The 4 Stages Of Length And 4 Wheel Arm Position, The Dolly Can Be Adjusted While Afloat In The Boat, Leaving Or Coming Into The Dock. The Dolly System Can Also Bring Different Performance Positions For Boat Launching. The Wheel Arm Length Increment Is 2.5” Per Stage. Plus The Wheel’S Diameter, The Range Of Length Is 23 - 30 Inches..
Features
- Seamax Deluxe Boat Launching Wheels system is made by the marine grade T6 aluminum alloy with CNC processing and shiny looking anodized coating against the corrosion. Thus the product is good for saltwater use. Small parts are all made by solid stainless steel and reinforced Nylon. The air filled tire is lab-tested (1000 LBS), and is great to support a MAX loading of 600 LBS in all condition. A great add-on for inflatable, aluminum and fiberglass boats.
- BENEFIT of its new design - With the 4 stages of length and 4 wheel arm position, the dolly can be adjusted while afloat in the boat, leaving or coming into the dock. The dolly system can also bring different performance positions for boat launching. The wheel arm length increment is 2.5 per stage. Plus the wheel s diameter, the range of length is 23 - 30 inches.
- The wheel arm has 60 and 90 locking position to move up and down. The upper-60 position can free up more space on the top and side of the transom. The lower 60 position lets the wheels run at the same level as the prop, and thus turns the wheels as a prop guard when boat launching.
- The transom bracket installation area is about 8 x 3 inches. Shorter transom bracket design brings more possible installation for all type of boats with different transom. The brackets can be installed at the waterline top position, so to avoid the water comes into the screw holes. We had developed a profile for the transom bracket in 2019. Now the bracket only requires 2 bolts to install. Easier to put it on your boat with the same loading capacity.
- TRIPLE heavy duty, TRIPLE quality! Product is made by Seamax Canada with 2 years limited warranty and 100% Customer Satisfaction guaranteed! The Quick Operation Features of the Deluxe Boat Dolly include - spring load locking pin for wheel arm position adjustment; solid spring load buttons for wheel arm length adjustment; and quick released lock pin for wheel arm and wheel bearing.
- See more on Amazon...
Brand: Seamax | Manufacturer: Seamax
See On Amazon #13
Seamax Portable Aluminium Boat Carry and Launching Hand Dolly Set with Quick Release Handle
Asin: B07VWL1961 | Ean: 0721541237051 | UPC: 721541237051
Optional Hitch Attachment Is Available For Off-Road Towing With An Atv, Golf Cart, And Other Utility Vehicle. Max Towing Speed Is 10Km / Hour. It Is Great For Launching Your Boat To The Water Quickly. 10 Minutes To Assemble Or Disassemble. This Product Has Been Selling To Many Many Places Including Sail Club Or Yacht Club..
The Boat Hand Dolly Is Suitable For Many Use Cases. For Example, Carry Your Boat From The Parking Lot To The Boat Launching Lane In A Park. Carry Your Boat From Your Backyard To The Water. Move Your Boat Within The Yacht Club Or Sail Club. Users Shall Check The Max Pay Load (250 Lbs) And Speed (10 Km/Hour) Requirements. The Boat Hand Dolly Is Not For Regular Road / Highway Use. Boat Hand Dolly User Cannot Tow This Hand Dolly On The Road Or Highway By Vehicle For Any Of Purposes..
Tire Inflation: Dolly Tires May Not Be Fully Inflated When Shipping. Give Only 15-20 Psi Max Air Pressure In Room Temperature Before Using. Best To Use Portable Type Digital Control Air Pump To Avoid Over Inflation Issue..
The New Seamax Boat Hand Dolly Is Made By Strong Aluminium. Dolly Payload 250 Lbs For Boat And Motor. Suggested Tire Air Pressure Is 15 Psi, Max 20 Psi. It Is Good For An Inflatable Boat Up To 13Ft, An Aluminum Or Fiberglass Boat Up To 14Ft, And A Small Sail Boat Up To 15Ft..
Features
- This lightweight aluminium adjustable universal boat hand dolly is equipped with an extendable main pole, angle flexible rear bunks, and position adjustable front bow support bunk to carry the boat. The boat hand dolly weighs about 45 Lbs including two 16 Pneumatized wheels. The disassembled boat hand dolly can be fit into an easy carrying box.
- The new Seamax boat hand dolly is made by strong aluminium. Dolly Payload 250 Lbs for boat and motor. Suggested tire air pressure is 15 PSI, max 20 PSI. It is good for an inflatable boat up to 13ft, an aluminum or fiberglass boat up to 14ft, and a small sail boat up to 15ft.
- Optional hitch attachment is available for off-road towing with an ATV, golf cart, and other utility vehicle. Max towing speed is 10km / hour. It is great for launching your boat to the water quickly. 10 minutes to assemble or disassemble. This product has been selling to many many places including sail club or yacht club.
- Tire inflation: Dolly tires may not be fully inflated when shipping. Give only 15-20 PSI max air pressure in room temperature before using. Best to use portable type digital control air pump to avoid over inflation issue.
- The boat hand dolly is suitable for many use cases. For example, carry your boat from the parking lot to the boat launching lane in a park. Carry your boat from your backyard to the water. Move your boat within the yacht club or sail club. Users shall check the max pay load (250 Lbs) and speed (10 KM/Hour) requirements. The boat hand dolly is NOT for regular road / highway use. Boat hand dolly user cannot tow this hand dolly on the road or highway by vehicle for any of purposes.
- See more on Amazon...
Brand: Seamax | Manufacturer: Seamax Marine
Weight: 45.00 pounds
See On Amazon #14
Seamax 12" Dual Wheels Upgrade Kit for Seamax Boat Easy Load Launching Wheels System
Asin: B00EA9BBSC | Ean: 0081175855022 | UPC: 081175855022
Provide Better Support On Soft Terrain And Sandy Beach..
Note: This Upgrade Kit Requires An Existing Full Set Of Seamax Easy Load Launching Wheels..
Package Includes: 2X 12 Inch Pneumatic Tire, 2 X Dual Wheel Bearing..
12" Dual Wheels System Suggested For Large Boat With Wider Transom..
Features
- Give a 4-Wheels system option to your Seamax Easy Load Launching Wheels.
- 12 dual wheels system suggested for large boat with wider transom.
- Provide better support on soft terrain and sandy beach.
- Package includes: 2x 12 inch Pneumatic tire, 2 x dual wheel bearing.
- Note: this upgrade kit requires an existing full set of Seamax Easy Load launching wheels.
- See more on Amazon...
Brand: Seamax | Manufacturer: Seamax Marine
Weight: 10.00 Pounds
See On Amazon #15
Seamax EZ Load Boat Launching Wheels Set for Inflatable Boat & Aluminum Boat, Support MAX 500Lbs Loading with 12" Pneumatic Tire & 2 Height Position
Asin: B08KFQ9YH9 | Ean: 0352609230341 | UPC: 352609230341
Benefit From Its New Push Button Design & Max 3 Stages Wheel Arm, The System Can Be Adjusted While Afloat In The Boat Leaving Or Coming Into, It Can Also Bring Different Performance Position For Boat Launching. The Wheel Arm Length Increment Is 2.5” Per Stage, Plus The Wheel’S Diameter, The Range Of Length Is 22-28 Inches..
Maintenance: Wash It After Using From Salt Water Or Sandy Beach. Check Tire Pressure Before Every Using. Don’T Store The Wheels Under The Sun Or Beside The Heat To Maximize Its Life Time. Take The Wheel Arm Off From The Transom Bracket When Store Your Boat. Lube The Spring Load Dolly System Is Necessary. Keep The Lock Pin On The Dolly Bracket. Manufacturer 2 Years Parts Limited Warranty Within Usa & Canada. 30 Days Free Replacement On Any Defective Ransom Wheel Sets..
Tire Inflation: Dolly Tires May Not Be Fully Inflated When Shipping; Please Only Give 15-20 Psi Pressure At Room Temperature Before Using. Best To Use Portable Type Digital Air Pump In Case Tire Over Inflated. Tire Over Inflated Will Cause Damage And The Warranty Is Not Covered. Dual Wheel Kit Is Available For This Dolly For Heavy Loading Application..
This System Is Designed For Boats With Transom, The Length Of The Boat Should Not Exceed16 Ft & Total Weight Within 500 Lbs. These Transom Wheels Should Only Be Installed By An Adult With Some Experience In Working With Tools. To Install The Wheel Set Properly, You Will Need To Drill 4 Holes (5/16”) In The Transom For The Mounting. Addition Reinforcement May Be Required On Some Aluminum Transom. And You Can Use Marine Sealant And Suggested Sikaflex 291..
Features
- Seamax Easy Load Boat Launching Wheels Set is designed by Seamax Canada, made by hardest marine grade T6 aluminum alloy with CNC processing; Shiny looking anodized coating on all aluminum parts, product is good for saltwater using; Small parts are all made by solid stainless steel. Lab 1000Lbs tested, support MAX 500Lbs loading in all condition, good for inflatable boats, aluminum boats and fiberglass boats.
- This system is designed for boats with transom, the length of the boat should not exceed16 FT & total weight within 500 Lbs. These transom wheels should only be installed by an adult with some experience in working with tools. To install the wheel set properly, you will need to drill 4 holes (5/16 ) in the transom for the mounting. Addition reinforcement may be required on some aluminum transom. And you can use marine sealant and suggested Sikaflex 291.
- Benefit from its new Push Button design & max 3 stages wheel arm, the system can be adjusted while afloat in the boat leaving or coming into, it can also bring different performance position for boat launching. The wheel arm length increment is 2.5 per stage, plus the wheel s diameter, the range of length is 22-28 inches.
- Tire inflation: Dolly tires may not be fully inflated when shipping; please only give 15-20 PSI pressure at room temperature before using. Best to use portable type digital air pump in case tire over inflated. Tire over inflated will cause damage and the warranty is not covered. Dual wheel kit is available for this dolly for heavy loading application.
- Maintenance: Wash it after using from salt water or sandy beach. Check tire pressure before every using. Don t store the wheels under the sun or beside the heat to maximize its life time. Take the wheel arm off from the transom bracket when store your boat. Lube the spring load dolly system is necessary. Keep the lock pin on the dolly bracket. Manufacturer 2 years Parts Limited Warranty within USA & Canada. 30 days free replacement on any defective ransom wheel sets.
- See more on Amazon...
Brand: Seamax | Manufacturer: Seamax Marine
See On Amazon #16
Seamax Recreational 10.8 Feet Inflatable Boat with High Pressure Airmat Floor Easy to Roll up,Max 4 Passengers and 15HP Rated-Dark Grey
Asin: B086PB4N9Z | Ean: 0352609235100 | UPC: 352609235100
Marine Grade Pvc Coating Fabric For Pontoon Construction; Thicker 1.2Mm Material For Entire Boat Bottom. Heavy Duty Life Line Around The Entire Boat. Secondary Life Line On The Inside Of The Boat; Marine Grade 1.5" Thick Birch Plywood Transom; Heavy Duty Rubbing Strake Around The Boat And Keel Bottom..
Inflatable Boats Have A Low Center Of Gravity. It Is Practically Impossible To Capsize It. Whether Stationary Or Cruising. Seamax Inflatable Boats Are Always Stable. You Can Stand Up When Fishing. Children Are Safe. Mooring Is Simple. Seamax Is Great As A Family Boat..
Aluminum Bench Seat(S). Aluminum Oars. Heavy Duty Boat Hull And Floor Carrying Bags. Front Towing Line. Foot Pump, Repair Kit And Spare Parts Kit..
New Boat Finished With Double Thermal Welded Chamber Seam & Double Overlapped, This Structure Can Help The Boat Last Much Longer And Comes With 4 Years Guarantee..
Features
- Overall length 10.8ft, beam 5ft, inner dimensions L7.2ft x W2.2ft, pontoon diameter 16.5 inches; 3 pontoon chambers and 1 keel chamber for V hull; max pressure 3.6PSI (25kPa); boat dry weight 120Lbs with Aluminum Floor or 100Lbs with Airmat Floor. max loading 660Lbs, 4 passenger, boat rated 15HP motor and with 15 Short shaft transom. Red and Dark Gray color to choose.
- New boat finished with double thermal welded chamber seam & double overlapped, this structure can help the boat last much longer and comes with 4 years guarantee.
- Marine Grade PVC coating fabric for pontoon construction; Thicker 1.2mm material for entire boat bottom. Heavy duty life line around the entire boat. Secondary life line on the inside of the boat; Marine grade 1.5 thick birch plywood transom; Heavy duty rubbing strake around the boat and keel bottom.
- Aluminum bench seat(s). Aluminum oars. Heavy duty boat hull and floor carrying bags. Front towing line. Foot pump, repair kit and spare parts kit.
- Inflatable boats have a low center of gravity. It is practically impossible to capsize it. Whether stationary or cruising. SEAMAX inflatable boats are always stable. You can stand up when fishing. Children are safe. Mooring is simple. Seamax is great as a family boat.
- See more on Amazon...
Brand: Seamax | Manufacturer: SMX
Weight: 176.00 Pounds
See On Amazon #17
Seamax Universal Sunlitec 3-Layers Welded Floorboard Storage and Carrying Bag for Inflatable Boat with Reflective Edges (Size C:Suitable for Boat Size 13.5-15.5ft #420-470)
Asin: B09D2ZNB5B | Ean: 0808887264269 | UPC: 808887264269
Strong Structure For Weight Carrying: Built-In 3 Main 2” Wide Bottom Nylon Webbing Holder Crossing The Entire Bag, Also Attached Four (4) 1.5” Reinforcement Webbing Lines At Each Side From The Holder Until The Handles To Disperse The Carrying Weight And Maximize The Bag Capacity. All Adjustment Webbing Straps Have The Back Reinforcement Through The Fabric.
New Sunlitec Fabric With Well Cnc Made: High-Performance Sunlitec Outer Layer, Micro-Poly Foam Middle Layer, And Polyester Inner Layer. This Exclusive New Material Can Provide More Strength And Better Durability, Better Temperature, And Water Resistance. Sewed By Cnc Machine And Seamax 2 Years Coverage To Protect Your Investment..
4 Ways Sturdy Handles: Attach 8 Units Of Fully Reinforced Soft Handles With Reflective Tape. Your Hands Can Reach Any Of The 2 Handles From Any Direction. The Reflective Added Feature Is Good For Night Vision. Max Carrying Weight Capacity Can Reach 220Lbs (100Kg). 4 Sizes To Choose From Suitable For A Foldable Inflatable Boat Up To 20Ft..
Solid Materia To Build: Provides 4X 1.5” Horizontal And 3X 2” Vertical Length Adjustable Tie-Up Webbing And Is Super Solid. With 2 Types Of Quick-Release Buckles, You Can Pack Up All The Boat Parts Into The Bag Quickly And Easily. Four Triangle Bag Conner With Sew-In Elastic Cord, Maximize The Bag Storage Performance And Secure All Contain. Included One Zipped Pocket 8X6x2 Inches Beside The Handle For Your Convenience..
Features
- COMMERCIAL GRADE QUALITY: Newly designed Seamax 4-Sided folding style Sunlitec floorboard carrying bag. Easy for packing and carrying your heavy floorboards and boat accessories. Marine Grade Sunlitec Fabric (MGSF) to build and provide 200% extra tear performance comparing traditional boat bags. Best Anti-UV technology and great water-resistant feature. Meets many commercial standards and make to last.
- SOLID MATERIA TO BUILD: Provides 4x 1.5 horizontal and 3x 2 vertical length adjustable tie-up webbing and is super solid. With 2 types of quick-release buckles, you can pack up all the boat parts into the bag quickly and easily. Four triangle bag conner with sew-in elastic cord, maximize the bag storage performance and secure all contain. Included one zipped pocket 8x6x2 inches beside the handle for your convenience.
- STRONG STRUCTURE FOR WEIGHT CARRYING: Built-in 3 main 2 wide bottom nylon webbing holder crossing the entire bag, also attached four (4) 1.5 reinforcement webbing lines at each side from the holder until the handles to disperse the carrying weight and maximize the bag capacity. All adjustment webbing straps have the back reinforcement through the fabric
- 4 WAYS STURDY HANDLES: Attach 8 units of fully reinforced soft handles with reflective tape. Your hands can reach any of the 2 handles from any direction. The reflective added feature is good for night vision. Max carrying weight capacity can reach 220Lbs (100KG). 4 sizes to choose from suitable for a foldable inflatable boat up to 20ft.
- NEW SUNLITEC FABRIC WITH WELL CNC MADE: High-performance Sunlitec outer layer, micro-poly foam middle layer, and polyester inner layer. This exclusive new material can provide more strength and better durability, better temperature, and water resistance. Sewed by CNC machine and Seamax 2 years coverage to protect your investment.
- See more on Amazon...
Brand: Seamax Marine | Manufacturer: Seamax Marine
See On Amazon #18
Seamax HD430 14 Feet Heavy Duty Inflatable Boat, Max 9 Passengers and 35HP Rated-(Dark Grey)
Asin: B08DK8FDNL | Ean: 0352609230075 | UPC: 352609230075
Marine Grade Pvc Coating Fabric For Boat Construction. Thicker 1.2 Mm Material For Entire Boat Bottom. Seamax Developed Reinforcement Design For Keel, Transom Underneath, And Pontoon Bottom. Heavy Duty Life Line Around The Entire Boat. Secondary Life Line On The Inside Of The Boat. Heavy Duty Rubbing Strake Around The Boat And Keel Bottom. Solid 1.5" Thick Transom Made By Top Grade Marine Birch Plywood..
This Ocean430 14Ft Inflatable Boat Shipment Has 2 Packages And Total Shipping Weight About 300Lbs, Hull Package Dimensions Are 54X28x18”, And Floor Package Dimensions Are About 47X27x11”. If Boat Trailer Is Needed, You Can Check With Ez Load Trailer Website To Locate A Closest Dealer In Your Area..
2X Aluminum Bench Seats, 2X Aluminum Oars, Dual Heavy Duty Boat Carrying Bags (For Hull And Floorboard). 2000 Lbs Capacity Front Towing Line. Foot Pump, Boat Repair Kit, And Spare Parts Included..
New Boat Finished With 4 Layers & Triple Overlapped Chamber Seam, Double Thermal Welded Structure With Industry Best 6 Years Guarantee..
Features
- Overall length 14ft, beam 6.3ft. Inner dimensions L9.6ft x W3.0ft. Pontoon diameter 19.7 inches. 5 pontoon chambers and 1 keel chamber. Max pressure 3.6PSI (25kPa). Hypalon-Style 4 layers overlapped seam. Well finished V hull. Boat dry weight 230Lbs. Max loading 1982 Lbs, 9 passengers, boat rated 35HP motor. 15 short shaft transom. Heavy duty aluminum floor. Red and Dark Gray colors to choose.
- New boat finished with 4 layers & triple overlapped chamber seam, double thermal welded structure with industry best 6 years guarantee.
- Marine Grade PVC coating fabric for boat construction. Thicker 1.2 mm material for entire boat bottom. Seamax developed reinforcement design for keel, transom underneath, and pontoon bottom. Heavy duty life line around the entire boat. Secondary life line on the inside of the boat. Heavy duty rubbing strake around the boat and keel bottom. Solid 1.5 thick transom made by top grade marine birch plywood.
- 2x aluminum bench seats, 2x aluminum oars, dual heavy duty boat carrying bags (for hull and floorboard). 2000 Lbs capacity front towing line. Foot pump, boat repair kit, and spare parts included.
- This Ocean430 14ft inflatable boat shipment has 2 packages and total shipping weight about 300Lbs, Hull package dimensions are 54x28x18 , and Floor package dimensions are about 47x27x11 . If boat trailer is needed, you can check with EZ Load trailer website to locate a closest dealer in your area.
- See more on Amazon...
Brand: Seamax | Manufacturer: SEAMAX MARINE
See On Amazon #19
Seamax Recreational 10.8 Feet Inflatable Boat with High Pressure Airmat Floor Easy to Roll up, Max 4 Passengers and 15HP Rated-RED
Asin: B086PCFLPL | Ean: 0352609235117 | UPC: 352609235117
Marine Grade Pvc Coating Fabric For Pontoon Construction; Thicker 1.2Mm Material For Entire Boat Bottom. Heavy Duty Life Line Around The Entire Boat. Secondary Life Line On The Inside Of The Boat; Marine Grade 1.5" Thick Birch Plywood Transom; Heavy Duty Rubbing Strake Around The Boat And Keel Bottom..
Inflatable Boats Have A Low Center Of Gravity. It Is Practically Impossible To Capsize It. Whether Stationary Or Cruising. Seamax Inflatable Boats Are Always Stable. You Can Stand Up When Fishing. Children Are Safe. Mooring Is Simple. Seamax Is Great As A Family Boat..
Aluminum Bench Seat(S). Aluminum Oars. Heavy Duty Boat Hull And Floor Carrying Bags. Front Towing Line. Foot Pump, Repair Kit And Spare Parts Kit..
New Boat Finished With Double Thermal Welded Chamber Seam & Double Overlapped, This Structure Can Help The Boat Last Much Longer And Comes With 4 Years Guarantee..
Features
- Overall length 10.8ft, beam 5ft, inner dimensions L7.2ft x W2.2ft, pontoon diameter 16.5 inches; 3 pontoon chambers and 1 keel chamber for V hull; max pressure 3.6PSI (25kPa); boat dry weight 120Lbs with Aluminum Floor or 100Lbs with Airmat Floor. max loading 660Lbs, 4 passenger, boat rated 15HP motor and with 15 Short shaft transom. Red and Dark Gray color to choose.
- New boat finished with double thermal welded chamber seam & double overlapped, this structure can help the boat last much longer and comes with 4 years guarantee.
- Marine Grade PVC coating fabric for pontoon construction; Thicker 1.2mm material for entire boat bottom. Heavy duty life line around the entire boat. Secondary life line on the inside of the boat; Marine grade 1.5 thick birch plywood transom; Heavy duty rubbing strake around the boat and keel bottom.
- Aluminum bench seat(s). Aluminum oars. Heavy duty boat hull and floor carrying bags. Front towing line. Foot pump, repair kit and spare parts kit.
- Inflatable boats have a low center of gravity. It is practically impossible to capsize it. Whether stationary or cruising. SEAMAX inflatable boats are always stable. You can stand up when fishing. Children are safe. Mooring is simple. Seamax is great as a family boat.
- See more on Amazon...
Brand: Seamax | Manufacturer: SMX
Weight: 180.00 Pounds
See On Amazon
Looking For Something Else?
Search