BoltHold - AK-4 Asphalt Anchor & Anchoring Cement Kit - Four 1500lb Pull Rated SP10-38 Chemical Anchors (5/8" x 6") with EPX2 Anchoring Cement - For Installation of Sheds, Carports, Bike Racks, & More
Asin: B01A18QXGU | Model: BoltHold Asphalt Anchors | PartNumber: BoltHold Asphalt Anchors | Ean: 0689481982748 | UPC: 689481982748
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Long Term Stability: Creates A Stress-Free Bond That Lasts! Due To Asphalt's Weaker Nature, Typical Expansion-Type Wedge Anchors Used In Concrete Won't Hold To The Pressure. Bolthold Anchors Solve This Problem By Embedding Deep Into The Compacted Gravel Below The Asphalt Layer To Increase The Shear Resistance And Ensure Long-Lasting StabilityβPerfect For Safely Installing Carports, Sheds, Bike Racks, Signage, Lights, Parking Barriers, And Many More Asphalt Mounting Applications..
Asphalt Anchors Corp: We Pride Ourselves On Offering Reliable And Effective Solutions For Asphalt Mounting. Our Boldhold Anchoring Products Are Manufactured With High-Grade Materials And Tested To Provide You With Long-Lasting Durability You Can Trust..
Warning: Please Note Thaat The Anchors Are Quite Large -- 6 Inch Long And Require A β
" Hole. Some Customers Envisioned The Anchors To Be Similar In Size To Expansion Anchors Usded On Concrete. Please Consider Size Before Ordering..
Easy To Install: Bolthold Makes Asphalt Anchoring A Breeze! For Quick Installation, Drill A Hole Into The Asphalt And The Gravel Below It And Fill With Epx2 Anchoring Grout (Included). Push In The Anchor Until It Is Flush With The Asphalt's Surface And Allow Grout To Harden. Anchors Are Ready For Use In 15 Mins To 1 Hour, Depending On Grout And Ground Temperature. Once Installed, Anchors Are Flush To The Ground And Pose No Tripping Risk Or Roadway Hazard..
Light-To-Medium Load: Pull Rated For 1,500 Lb! Designed For A Light-To-Medium Load, Bolthold Sp10-38 Chemical Anchors Resist At Least 1,500 Pounds Pull And 1,000 Pounds Of Moderate Shear Force At Ground Level. Rated For 200 In-Lb Rotary Torque, The Anchor's Welded Spiral Offers A Strong Bond With The Grout, While The Washer At The Top Prevents The Anchor From Dropping Below The Surface Or Being Pulled Up Into The Mounting Plate When Tightening The Bolt..
Features
- ASPHALT ANCHORING KIT: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors and anchoring grout allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. This AK-4 Kit includes four SP10-38 (3/8"-16 x 6") Zinc-Plated Anchors with a pre-installed 1" long bolt and 1" diameter washer and two bags of EPX2 cement-based Anchoring Grout.
- LIGHT-TO-MEDIUM LOAD: Pull rated for 1,500 lb! Designed for a light-to-medium load, BoltHold SP10-38 chemical anchors resist at least 1,500 pounds pull and 1,000 pounds of moderate shear force at ground level. Rated for 200 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt.
- LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability perfect for safely installing carports, sheds, bike racks, signage, lights, parking barriers, and many more asphalt mounting applications.
- EASY TO INSTALL: BoltHold makes asphalt anchoring a breeze! For quick installation, drill a hole into the asphalt and the gravel below it and fill with EPX2 Anchoring Grout (included). Push in the anchor until it is flush with the asphalt's surface and allow grout to harden. Anchors are ready for use in 15 mins to 1 hour, depending on grout and ground temperature. Once installed, anchors are flush to the ground and pose no tripping risk or roadway hazard.
- ASPHALT ANCHORS CORP: We pride ourselves on offering reliable and effective solutions for asphalt mounting. Our BoldHold anchoring products are manufactured with high-grade materials and tested to provide you with long-lasting durability you can trust.
- WARNING: Please note thaat the anchors are quite large -- 6 inch long and require a hole. Some customers envisioned the anchors to be similar in size to expansion anchors usded on concrete. Please consider size before ordering.
- See more on Amazon...
Brand: BoltHold | Manufacturer: Asphalt Anchors Corp.
Dimensions: 1.50 x 6.00 x 1.50 inches | Weight: 3.10 pounds
See On Amazon Similar To BoltHold AK4 Asphalt Anchor
#1
Rebar Stakes - 14 Inch Metal Spikes for Asphalt 1/2 Inch Diameter - 12 Pack Ground Stakes Heavy Duty for Speed Bump, Wheel Stop - Threaded Galvanized Steel Stakes - Rebar Support Estacas de Metal
Asin: B0B2C9YGF6 | Model: Spike-X | PartNumber: Spike-X | Ean: 0810054454366 | UPC: 810054454366
Strong-Holding - Ribs On The Metal Stakes Allow For Good Gripping When Driving Them Into The Hard Ground. Steel Stakes Can Also Be Used As Heavy Duty Tent Stakes, Canopy Stakes, Tarp Stakes, Or Fence Stakes..
Easy To Install - Drill 3 To 4 Inches Into The Asphalt, Taking Care To Match The Corresponding Holes In The Speed Bump Or Parking Block. Using A Hammer, Drive The Spikes Through The Holes Until Flush With The Device..
Galvanized Steel - Threaded Steel With A Galvanized Surface Coating Installs More Firmly In Various Hard Surfaces. Long-Lasting Design Is Weather-Resistant And Rustproof. Rebar Support For Reliable Long Term Use..
Asphalt Installations - Suitable Mounting Hardware For Permanent Installation In Asphalt. Versatile Use To Anchor Speed Bumps, Parking Curbs, Wheel Stops, Cable Protectors, Cord Covers, Handicap Threshold Ramps, And More..
Features
- 14" LONG REBAR SPIKES - Rebar stakes designed for asphalt, blacktop, tarmac, macadam, concrete, and pavement installations. 14-inch length with a 1/2-inch diameter is ideal for traffic and parking applications.
- ASPHALT INSTALLATIONS - Suitable mounting hardware for permanent installation in asphalt. Versatile use to anchor speed bumps, parking curbs, wheel stops, cable protectors, cord covers, handicap threshold ramps, and more.
- STRONG-HOLDING - Ribs on the metal stakes allow for good gripping when driving them into the hard ground. Steel stakes can also be used as heavy duty tent stakes, canopy stakes, tarp stakes, or fence stakes.
- GALVANIZED STEEL - Threaded steel with a galvanized surface coating installs more firmly in various hard surfaces. Long-lasting design is weather-resistant and rustproof. Rebar support for reliable long term use.
- EASY TO INSTALL - Drill 3 to 4 inches into the asphalt, taking care to match the corresponding holes in the speed bump or parking block. Using a hammer, drive the spikes through the holes until flush with the device.
- See more on Amazon...
Brand: Xpose Safety | Manufacturer: Xpose Safety
Dimensions: 5.51 x 5.51 x 0.79 inches | Weight: 10.75 pounds
See On Amazon #2
Electriduct 14" Rebar Spikes 1/2" Diameter (Pack of 16) - Mounting Hardware for Asphalt Installation. 6FT Speed Bump Anchor Kit, Parking Curb Wheel Stop, Cable Ramp
Asin: B095QPLCHG | Model: SB-ED-SPIKE-14X05-16PK | PartNumber: SB-ED-SPIKE-14X05-16PK
π¨π¦π: Electriduct Rebar Spikes Are Designed For Asphalt. Permament Installation Mounting Hardware For Speed Bumps, Parking Curbs, Wheel Stops, Cable Protectors, Cord Covers, Handicap Threshold Rampsβ¦.
π ππ§ππ₯πππ: Steel Rebar Spikes For Any Outdoor Application.
ππ‘π¦π§πππππ§ππ’π‘: Drill 3 To 4 Inches Into The Asphalt Matching The Speed Bump Or Parking Block Holes. Using A Hammer, Drive The Spikes Through The Holes Until Flush With The Device..
π¦πππ: 14" Long And 1/2" Diameter (0.5 Inch).
Features
- : Includes 16 Rebar Spikes
- : 14 Long and 1/2 Diameter (0.5 Inch)
- : Electriduct Rebar Spikes are designed for asphalt. Permament installation mounting hardware for speed bumps, parking curbs, wheel stops, cable protectors, cord covers, handicap threshold ramps
- : Drill 3 to 4 inches into the asphalt matching the speed bump or parking block holes. Using a hammer, drive the spikes through the holes until flush with the device.
- : Steel Rebar Spikes for any outdoor application
- See more on Amazon...
Brand: Electriduct | Manufacturer: Electriduct
Dimensions: 0.50 x 14.00 x 0.50 inches
See On Amazon #3
BoltHold - amAK-4 Asphalt Anchor & Grout Kit - Four 1200 lbs. am625 Molded Chemical Anchors (5/8" x 6") with EPX2 Anchoring Cement - for Installation of Bike Racks, Lane Markers & More
Asin: B09Y2GCTPK | Model: amAK-4 | PartNumber: amAK-4 | Ean: 0689481982786 | UPC: 689481982786
1,500 Lbs. Pull Rated Per Anchor.
Flush Mount In Asphalt, Allow Removale Of Attached Item.
Anchors Will Not Rust.
Features
- Our Lowest Cost Kit for anchoring to asphalt
- Anchors will not rust
- 1,500 lbs. pull rated per anchor
- Flush Mount in asphalt, allow removale of attached item
- See more on Amazon...
Brand: BoltHold | Manufacturer: Asphalt Anchors Corp
Weight: 3.00 pounds
Warranty: 1 year
See On Amazon #4
Heavy Duty Asphalt Anchor,PK4
Asin: B08HL8GZH9 | Ean: 0691215114844 | UPC: 691215114844
Brand: Vestil | Manufacturer: VESTIL
See On Amazon ο»Ώ
Looking For Something Else?
Search