DROK 4 Digits High Accuracy Volt Amp Meter DC 0-100V 100A VA Multimeter Voltage Positive and Negative Current Tester Gauge Voltmeter Ammeter Digital 2in1 Blue Red LED Display with 100A/75mV Shunt
Asin: B019R8LMDO | Model: 200178 | PartNumber: 200178
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Four Digits Led Display Is Clear And Bright Enough With Red Volt & Blue Amp, The Decimal Point Will Automatically Move When Less Than 1A, Unit Is Ma..
Very Suitable For Monitoring The Condition Of The Battery, Or The Places Where Need Accurate Measurement..
Current Sampling Uses An Independent Ad Conversion Chip, More Accurate And Stable; The Meter Should Be Connected To The Negative To Measure Current..
The Meter Should Be Powered By An Isolated And Not Common Ground Power Supply, The Power Supply Is Dc 3.8-32V, With Reversed Connection Protection..
Features
- The DC 0-100V 100A multimeter can measure positive voltage and positive/negative, the decimal point will flash when measuring negative current.
- The meter should be powered by an isolated and not common ground power supply, the power supply is DC 3.8-32V, with reversed connection protection.
- Four digits LED display is clear and bright enough with RED Volt & BLUE Amp, the decimal point will automatically move when less than 1A, unit is mA.
- Current sampling uses an independent AD conversion chip, more accurate and stable; the meter should be connected to the negative to measure current.
- Very suitable for monitoring the condition of the battery, or the places where need accurate measurement.
- See more on Amazon...
First Available: 05/31/2017
Brand: DROK | Manufacturer: DROK
Dimensions: 0.79 x 1.89 x 1.14 Inches
See On Amazon Similar To DROK 4 Digits High Accuracy
#1
DROK Voltage Regulator DC 8-60V to 10-120V 15A Boost Converter, Constant Voltage Current Step Up Module Adjustable Output 48V 24V 12V DC Power Supply with LED Display
Asin: B01GFVI6R6 | Model: 200150 | PartNumber: 200150
Simple Mode: After Setting The Voltage And Current Values, Pressing "Ok" The Module Will Output, Then Use The "↑" "↓" Buttons To Increase Or Decrease The Value. At Output Statue, Short Press "Ok" To Switch Between Voltage And Current Display, Long Press For 3 Seconds To Turn On/Off The Function Of Displaying Volt And Amp In Turns..
Wide Application, Suitable For Wind Power, Dc Generator, Solar Panels To Charge Battery, You Can Also Make A Step-Up Power Supply To Power Devices..
Under Fully Functional Mode, There Are Three Special Functions: 0. Output Automatically When Power On; 1. Save And Call Out The Parameters, Display Power And Capacity; 2. Take Turns To Show The Parameters After Output Automatically. You Can Open Them By Yourself..
The Module Has Two Kinds Of Modes: Simple Mode And Fully Functional Mode(Simple Mode By Default); Uses 4 Digits High Brightness Led, Can Display Output Voltage, Current, Power And Capacity And Other Parameters; Has Out, Cc, Cv Indicators, Easy And Convenient To Check The Working Statues..
Features
- DC 8-60V to 10-120V 900W numerical control CC CV step up module with digital tube display, maximum current is 15A, with a fan to dissipate heat; Adopts advanced microprocessor, can regulate output voltage and current accurately, reliable and stable.
- The module has two kinds of modes: simple mode and fully functional mode(simple mode by default); Uses 4 digits high brightness LED, can display output voltage, current, power and capacity and other parameters; Has OUT, CC, CV indicators, easy and convenient to check the working statues.
- Simple mode: after setting the voltage and current values, pressing OK the module will output, then use the buttons to increase or decrease the value. At output statue, short press ok to switch between voltage and current display, long press for 3 seconds to turn on/off the function of displaying volt and amp in turns.
- Under fully functional mode, there are three special functions: 0. Output automatically when power on; 1. Save and call out the parameters, display power and capacity; 2. Take turns to show the parameters after output automatically. you can open them by yourself.
- Wide application, suitable for wind power, DC generator, solar panels to charge battery, you can also make a step-up power supply to power devices.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
Weight: 0.54 pounds
See On Amazon #2
DROK 4-20mA Generator, Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing
Asin: B071NLGP6L | Model: 300482 | PartNumber: 300482
Features
- AMP & VOLT DUAL SIGNAL GENERATOR: Multifunctional DROK signal generator kit is able to generate ampere & voltage by 1 module, which generate 0/4 - 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
See On Amazon #3
Voltage Current Display, DROK DC 4.5-100V Digital Voltmeter Ammeter Multimeter Panel, 0-50A Volt Tester Meter Amp Detector, LED Voltage Amperage Monitor Gauge for Automotive Motor Battery
Asin: B07QVXXGVR
Display --- 0.39'' Crisp And Bright Led Screen Displays Voltage & Current Value..
Note --- The Shunt Should Be Connected When Wiring, Otherwise The Meter Will Be Burnt..
Calibration --- With Voltage & Current Calibration Potentiometer..
Application --- Monitoring Storage Battery, Solar Panel, Model Railroad, Rv, Motorcycle, House Batteries, Motor, Etc..
Features
- PARAMETER --- measuring voltage DC 4.5V-100V; current 0-50A.
- APPLICATION --- monitoring storage battery, solar panel, model railroad, RV, motorcycle, house batteries, motor, etc.
- DISPLAY --- 0.39'' crisp and bright LED screen displays voltage & current value.
- CALIBRATION --- with voltage & current calibration potentiometer.
- NOTE --- the shunt should be connected when wiring, otherwise the meter will be burnt.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
Weight: 0.00 pounds
See On Amazon #4
DROK USB Power Meter, DC 4-24V 5A LCD USB A&C Voltage Current Display USB Tester Multimeter, Test Speed of Charger Cables, Capacity of Power Bank, QC 2.0 3.0
Asin: B07FL5Y821 | Model: 200357 | PartNumber: 200357
Fast Charging --- Support Qc2.0, Qc3.0, Apple 2.4A/2.1A/1A/0.5A, Android Dcp, Samsung. Note: This Fast Charge Protocol Identification Mode Is For Reference Only As The Mobile Phone Update Is Faster And Cannot Be Accurately Identified..
Note --- 1. The Meter Is Covered With Protection Film To Protect The Meter From Scratching During Shipping. Scratches On The Protective Film Are Normal, Just Tear It Off. 2. Please Connect The Usb Meter Correctly. From Usb Male Port To Usb Female Port, Or From Type-C In Port To Type-C Out Port. Don’T Connect From Usb Male Port To Type-C Out Port. 3. This Version Doesn’T Support Blue~Tooth Connection..
Load Test --- This Detector Can Be Used With Our Drok Load Testers To Test The Output Voltage, Current, Power And Other Parameters Of The Phone Chargers, Power Banks, Usb Cables, Etc..
1.44” Lcd Display --- The Multimeter Has A 1.44 Inch Lcd High-Definition Color Lcd Display, On Which Real-Time Display Of The Charging Status Of Electrical Appliances, Voltage, Current, Capacity, Energy, Power, Equivalent Impedance, Temperature And Other Indicators Are Clear At A Glance. Note: The Screen Can Be Rotated..
Features
- Parameter --- Input voltage: 4-24.000V; Input current: 0-5.0000A; Capacity measurement range: 0-99999mAh; Energy measurement range: 0-99999mWh; Load impedance measurement range: 0.8 -9999.9 ; Temperature measurement range: -10 C~100 C/0 F~200 F (Default temperature unit: Celsius, can be switch to Fahrenheit).
- 1.44 LCD Display --- The multimeter has a 1.44 inch LCD high-definition color LCD display, on which real-time display of the charging status of electrical appliances, voltage, current, capacity, energy, power, equivalent impedance, temperature and other indicators are clear at a glance. NOTE: The screen can be rotated.
- Fast Charging --- Support QC2.0, QC3.0, APPLE 2.4A/2.1A/1A/0.5A, Android DCP, SAMSUNG. NOTE: This fast charge protocol identification mode is for reference only as the mobile phone update is faster and cannot be accurately identified.
- Load Test --- This detector can be used with our DROK load testers to test the output voltage, current, power and other parameters of the phone chargers, power banks, USB cables, etc.
- NOTE --- 1. The meter is covered with protection film to protect the meter from scratching during shipping. Scratches on the protective film are normal, just tear it off. 2. Please connect the USB meter correctly. From USB male port to USB female port, or from Type-C IN port to Type-C OUT port. Don t connect from USB male port to Type-C OUT port. 3. This version doesn t support blue~tooth connection.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
See On Amazon #5
DROK 0.56 Inch DC 3-30V Digital Voltmeter Voltage Tester Gauge Green Bright LED Display Two Wires Volt Meter for Solar Battery Monitor Car Motor Panel Mount
Asin: B00C2NTJHS | Model: 090079 | PartNumber: 090079
Safe To Use: With Reversed Connection Protection, It Will Not Be Burnt Even When Connected Reversely, But The Screen Display Nothing..
It Is Perfect To Monitor The Condition Of The Battery, Especially For Solar Projects, You Can Use It On Your Car, Trailer, Motor, Etc..
Large Screen And Bright Led Display, And It Is Well Made, The Strong Plastic Case Prevents It From Easily Damaged By Outer Force..
Easy To Connect Wires: It Only Has Two Wires, The Red Connects To Positive And The Black Connects To Negative..
Features
- High accuracy: Its decimal point will automatically move, and It also has a tiny potentiometer to do finer adjustments.
- Easy to connect wires: It only has two wires, the red connects to positive and the black connects to negative.
- Safe to use: with reversed connection protection, it will not be burnt even when connected reversely, but the screen display nothing.
- Large screen and bright LED display, and it is well made, the strong plastic case prevents it from easily damaged by outer force.
- It is perfect to monitor the condition of the battery, especially for solar projects, you can use it on your car, trailer, motor, etc.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
Dimensions: 0.87 x 1.89 x 1.14 Inches | Weight: 0.27 pounds
See On Amazon #6
DROK AC Power Meter, AC 80-300V 100A Voltage Current Color LCD Display Panel, Digital Voltmeter Ammeter Watt Active Power Energy Battery Monitor Multimeter Volt Amp Meter with Current Transformer CT
Asin: B01MRZAFAF | Model: 200199 | PartNumber: 200199
Special Design: Our Ac Voltage Display Designed With A Switch For Clear Electric Energy And Come With A 15.5Mm Ct, With Fast Measuring Speed Of 2 Times/S..
Note: 1). The Wires Of Voltage Input Terminal (Green) And Ct Secondary Input Terminal (Blue) Cannot Be Connected Wrongly, Or The Meter Will Be Damaged. 2). The Screen Cannot Be Squeezed During Installation, Or There Will Be Garbled Code Or Break Code..
Auto Store & Memory Function: When Power Off, The Electric Energy Data Will Be Stored And Memorized, Can Be Reset..
Color Led Display: The Watt Meter Panel Adopts Clear Lcd Displaying Accurate Voltage, Ampere, Active Power And Electric Quantity Measuring Values..
Features
- Parameters: DROK ac power meter voltage measuring range is AC 80-300V, current measuring range is 0-100A, active power range is 0-30000W, electric energy range is 0-9999999kWh.
- Color LED Display: the watt meter panel adopts clear LCD displaying accurate voltage, ampere, active power and electric quantity measuring values.
- Special Design: our ac voltage display designed with a switch for clear electric energy and come with a 15.5mm CT, with fast measuring speed of 2 times/s.
- Auto Store & Memory Function: when power off, the electric energy data will be stored and memorized, can be reset.
- Note: 1). The wires of voltage input terminal (green) and CT secondary input terminal (blue) cannot be connected wrongly, or the meter will be damaged. 2). The screen cannot be squeezed during installation, or there will be garbled code or break code.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
Weight: 0.00 pounds
See On Amazon #7
Current Loop, Two-Wire High Accuracy 4-20mA Current Loop Signal Generator LCD Transducer Test Signal Current
Asin: B07T9CJDZ1 | Model: plh8597-0620 | PartNumber: plh8597-0620 | Ean: 0723645556830 | UPC: 723645556830
Convenient Display: Liquid Crystal Display (Lcd) Of Current Loop Signal Generator Provides A Clear And Easy-To-Read Interface, Allowing You To Quickly And Easily Access Important Information..
Multiple Outputs And Storage Options: With The Ability To Set 2-9 Programmable Outputs, And The Feature Of Automatic And Manual Storage Of Output Settings, Current Loop Signal Generator Offers Versatility And Convenience For Your Applications. Linear Output Can Be Calibrated; The Actual Output Can Be Consistent With The Display Of Customer Device..
Flexible And Adjustable Settings: Equipped With A Rotary Encoder, You Have The Ability To Easily Adjust And Fine-Tune Various Settings, Enhancing Usability And Customization. Output Range Can Be Set; 4-20Ma (Device Control) / -21Ma (Signal Debugging)..
High Accuracy: With An Impressive Accuracy Of Up To 0.01, This Current Loop Signal Generator Ensures Reliable And Precise Measurements For Your Needs..
Features
- Current to Voltage Conversion: Current loop signal generator can accurately convert a 4-20mA current signal into a corresponding voltage, allowing for precise control of current in the circuit. Terminals are not positive or negative.
- High Accuracy: With an impressive accuracy of up to 0.01, this current loop signal generator ensures reliable and precise measurements for your needs.
- Convenient Display: Liquid crystal display (LCD) of current loop signal generator provides a clear and easy-to-read interface, allowing you to quickly and easily access important information.
- Flexible and Adjustable Settings: Equipped with a rotary encoder, you have the ability to easily adjust and fine-tune various settings, enhancing usability and customization. Output range can be set; 4-20mA (device control) / -21mA (signal debugging).
- Multiple Outputs and Storage Options: With the ability to set 2-9 programmable outputs, and the feature of automatic and manual storage of output settings, current loop signal generator offers versatility and convenience for your applications. Linear output can be calibrated; The actual output can be consistent with the display of customer device.
- See more on Amazon...
Brand: Jadeshay | Manufacturer: Jadeshay
Weight: 0.10 pounds
See On Amazon #8
CenryKay Adjustable Signal Generator,PWM Pulse Frequency Duty Cycle Rectangular Wave Square Wave Signal Generator DC 3.3-35V 5-30mA LCD Display Module
Asin: B08237FJ5Q | Ean: 0789659263768 | UPC: 789659263768
►Output Amplitude: Pwm Auxiliary Value Is Equal To Power Supply Voltage; Ambient Temperature: -20 ~ + 70 ℃.
►Application ---- As Square Wave Signal Generator For Experimental Development; As Square Wave Signal Generator For Motor Driver; As Adjustable Pulse Generator For Mcu; As Pulse Generator, Control Related Circuits (Pwm Dimming, Speed Regulating)..
►All Parameters Will Be Saved Automatically After Setting And Therefore Won't Lose When Power Off..
►Frequency Accuracy: The Accuracy In Each Range Is About 2%; Signal Load Capacity: The Output Current Can Be About 5 ~ 30Ma.
Features
- Working voltage: 3.3 ~ 30V; Frequency range: 1Hz ~ 150KHz
- Frequency accuracy: the accuracy in each range is about 2%; signal load capacity: the output current can be about 5 ~ 30ma
- Output amplitude: PWM auxiliary value is equal to power supply voltage; ambient temperature: -20 ~ + 70
- All parameters will be saved automatically after setting and therefore won't lose when power off.
- APPLICATION ---- as square wave signal generator for experimental development; as square wave signal generator for motor driver; as adjustable pulse generator for MCU; as pulse generator, control related circuits (PWM dimming, speed regulating).
- See more on Amazon...
Brand: CenryKay | Manufacturer: CenryKay
Weight: 1.00 pounds
See On Amazon #9
4 20mA Generator, High Accuracy 4 20mA 0 10V Current Voltage Generator with AMP and Volt Dual Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing
Asin: B0BF5T6SCX
Ampere And Voltage Display Calibration: There Are Current And Voltage Display Calibration Potentiometers On The Back Of The Module. If The Display Is Not Accurate, You Can Calibrate The Displayed Value Of The Current Voltage Yourself..
Good Performance: Coarse And Fine Tuning Dual Modes, And The Number Of Turns Can Be Set Separately. The Minimum Adjustment Number Of The Knob Is 0.01Ma, The Last Number Is Added Or Subtracted By 1. After Calibration, The Actual Error Is 0.01Ma, And The High Accuracy Linear Output Is Obtained..
Wide Range Of Applications: Our Signal Adapters Can Be Used For Signal Generators, Valve Adjustment, Inverter Control, Plc Debugging, Panel Debugging, Led Testing, Analog Transmitter Output..
Clear Led Display: Our 4 To 20Ma Generator Features A Bright And Clear 4 Digit Led Digital Display That Can Be Used To Monitor Output Current And Voltage. You Can Easily Switch Monitors By Simply Pressing The Switch Under The Monitor..
Features
- AMP and VOLT Dual : The multifunctional DROK generator kit can generate ampere and voltage through one module, just rotate a multi cycle precise potentiometer to generate 4 to 20mA current and 0 to 10V voltage , which is simple and convenient.
- Clear LED Display: Our 4 to 20mA generator features a bright and clear 4 digit LED digital display that can be used to monitor output current and voltage. You can easily switch monitors by simply pressing the switch under the monitor.
- Ampere and Voltage Display Calibration: There are current and voltage display calibration potentiometers on the back of the module. If the display is not accurate, you can calibrate the displayed value of the current voltage yourself.
- Wide Range of Applications: Our signal adapters can be used for signal generators, valve adjustment, inverter control, PLC debugging, panel debugging, LED testing, analog transmitter output.
- Good Performance: Coarse and fine tuning dual modes, and the number of turns can be set separately. The minimum adjustment number of the knob is 0.01mA, the last number is added or subtracted by 1. After calibration, the actual error is 0.01mA, and the high accuracy linear output is obtained.
- See more on Amazon...
Brand: Asixxsix | Manufacturer: Asixxsix
See On Amazon #10
Adjustable Signal Generator, DROK Signal Generator, Convenient Multifunction, Durable DC 0-10V, Easy to Calibrate for Valve Adjustment, Inverter Control
Asin: B0D3RKCHXY | Model: ZIZEVukehf4gmz2 | PartNumber: ZIZEVukehf4gmz2
Dual Signal Generator: This Product Can Generate 0/4 To20ma Current Signal And 0 To 10V Voltage Signal By Rotating A Multi Cycle Precision Potentiometer, Which Can Be Used As A Signal Source To Produce Output Such As Valve Regulation..
Wide Applications: Our Signal Adapters Can Be Used For Signal Generators, Valve Regulation, Inverter Control, Plc Commissioning, Panel Commissioning, Led Testing, Analog Transmitter Output..
High Accuracy: The Led Display Of The Signal Adapter Displays Current Accuracy To 0.1Ma, Voltage Accuracy To 0.01V, And The Operating Voltage Is Dc24v.
Three Digit Display: Our Signal Generator Has A Bright And Clear Three Digit Led Digital Display For Monitoring Output Current And Voltage. You Can Switch Monitors Easily By Pressing The Switch Below The Monitor..
Features
- Current and Voltage Calibration: Calibration potentiometers with current and voltage displays on the back of the module. If the display is accurate, you can calibrate the display value of the current voltage yourself.
- Three Digit Display: Our signal generator has a bright and clear three digit LED digital display for monitoring output current and voltage. You can switch monitors easily by pressing the switch below the monitor.
- Dual Signal Generator: This product can generate 0/4 to20mA current signal and 0 to 10V voltage signal by rotating a multi cycle precision potentiometer, which can be used as a signal source to produce output such as valve regulation.
- High Accuracy: The LED display of the signal adapter displays current accuracy to 0.1mA, voltage accuracy to 0.01V, and the operating voltage is DC24V
- Wide Applications: Our signal adapters can be used for signal generators, valve regulation, inverter control, PLC commissioning, panel commissioning, LED testing, analog transmitter output.
- See more on Amazon...
Brand: ZIZEV | Manufacturer: ZIZEV
See On Amazon
Looking For Something Else?
Search