Frontpage > Product > Megaware Keelguard Skegguard With Drain Hole - Protects Against Ramp Dragging - Skeg Protector - Eas...

MEGAWARE KEELGUARD SkegGuard with Drain Hole - Protects Against Ramp Dragging - Skeg Protector - Easy to Install - Mercury Mariner 40-50-60hp 2 & 4 Stroke, 3.44" Torpedo, 1991-Present

Asin: B00HBX48SY   |   Model: 27341   |   PartNumber: 27341   |   Ean: 0672057273418   |   UPC: 672057273418


As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.

Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27341 For Mercury: 40-50-60Hp 2 & 4 Stroke 2003-Present (See Model 27071 For Bigfoot, Command Thrust). Additional Models Are Available For Inboard And Outboard Motors Such As Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, Omc, Suzuki, Volvo, And Yamaha.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.

Features

  • Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
  • Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
  • Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
  • Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
  • Designed for Specific Motors SkegGuard 27341 for Mercury: 40-50-60HP 2 & 4 Stroke 2003-Present (See Model 27071 for Bigfoot, Command Thrust). Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
  • See more on Amazon...

Brand: MEGAWARE KEELGUARD   |   Manufacturer: MEGAWARE KEELGUARD INC.

Dimensions: 20.00 x 12.00 x 90.00 inches   |   Weight: 1.00 pounds

Warranty: Warranty

Amazon Price: $95.41 | as of 05/27/2024 (2:04am pst) *DETAILS
Availability: In Stock

See On Amazon




Similar To MEGAWARE KEELGUARD SkegGuard with Drain

  #1

27031 Stainless Steel Skeg Guard Fix Damaged Skeg Fits for Mercury Mercruiser Alpha I Generation II 1991-Present

Asin: B0BXNVS1MY   |   Model: 27031 Skeg Guard   |   PartNumber: 27031 Skeg Guard

Perfect Design – Design For Your Skeg, Drain Hole Prevents Against Corrosion/Freezing For Longer Wear. No Discernable Drag, Won't Compromise Performance, Avoid Expensive Repair Costs..
Satisfaction Guarantee - Besttruck Values Customers Shopping Experience And Provides Customers With A Good Shopping Environment. If You Are Not Satisfied With The Product, You Can Choose To Return It, We Support A 30-Day Full Refund And A One-Year Warranty..
Superior Material – Made Of 18-Gauge Marine-Grade 316 Stainless Steel. Mirror Polished To Improve The Gloss Of The Surface, Prevent Rust And Corrosion, Durable And Long Service Life. Meeting Or Exceeding Oem Specification..
Function – Protects Your Skeg From Corrosion And Wear In The Harsh Marine Environment. Thickened 3Mm Lower Wear Tab Reduces Ramp Dragging And Is Ideal For River Running. It Will Be Stronger And Much More Affordable Than Welding And Replacing A Lower Skeg..

Features

  • Wide Application - Fits for Mercury Mercruiser Alpha I Generation II 1991-Present. Replace for part 27031.
  • Function Protects your skeg from corrosion and wear in the harsh marine environment. Thickened 3mm lower wear tab reduces ramp dragging and is ideal for river running. It will be stronger and much more affordable than welding and replacing a lower skeg.
  • Perfect Design Design for your skeg, drain hole prevents against corrosion/freezing for longer wear. No discernable drag, won't compromise Performance, avoid expensive repair costs.
  • Superior Material Made of 18-Gauge Marine-Grade 316 Stainless Steel. Mirror polished to improve the gloss of the surface, prevent rust and corrosion, durable and long service life. Meeting or exceeding OEM specification.
  • Satisfaction Guarantee - Besttruck values customers shopping experience and provides customers with a good shopping environment. If you are not satisfied with the product, you can choose to return it, we support a 30-day full refund and a one-year warranty.
  • See more on Amazon...

Brand: besttruck   |   Manufacturer: besttruck

Dimensions: 1.30 x 12.70 x 7.09 inches

Warranty: 1 year warranty

Amazon Price: $69.99 | as of 05/27/2024 (2:04am pst) *DETAILS
List Price: $78.99

See On Amazon




  #2

27031 Skeg Guard Skeg Protector Kit Marine-Grade Stainless Steel Replacement for Mercury Mercruiser Alpha I Generation II 1991-2023

Asin: B0BXSFMW84   |   Model: Y-M-27031   |   PartNumber: Y-M-27031

Professional Design -- The Skeg Protector Kit Features A 3Mm Thickened Lower Wear Tab, Preventing Dragging On Ramps And Ensuring Optimal Performance During River Riding. Additionally, It Includes A Drain Hole At The Bottom To Prevent Corrosion And Freezing..
Easy Installation -- Secures With Self-Locking Hardware And Installs In As Little As 10 Minutes. It Can Be Installed With As Little As 2-3 Inches Of Skeg Remaining, Suitable For Repairing A Broken Skeg. The Package Includes Male And Female Locking Screws, As Well As An Allen Wrench For Convenient Installation..
Satisfaction Guarantee -- Yoursme Aims To Provide Excellent Products And Best Service For Customers. You Can Simply Return It If You Are Not Satisfied With The Product. We Support 30 Days Full Refund For Return And 12 Month Warranty..
Durable Material -- Constructed From Mirror-Polished 18-Gauge Marine-Grade 316 Stainless Steel, The Skeg Guard Is Built To Withstand The Elements And Provide Long-Lasting Protection..
Ultimate Skeg Protection -- Designed To Be Installed Over The Engine's Original Skeg. It Provides Ultimate Protection For Your Skeg, Whether You Want To Safeguard A New Skeg From Damage Or Repair An Impact-Damaged Or Chipped Skeg For Improved Performance..

Features

  • Widely Fitment -- Directly replace OEM Part number 27031, Fit for Mercury Mercruiser Alpha I Generation II 1991-2023, providing reliable protection for the skeg against the harsh ocean environment.
  • Ultimate Skeg Protection -- Designed to be installed over the engine's original skeg. It provides ultimate protection for your skeg, whether you want to safeguard a new skeg from damage or repair an impact-damaged or chipped skeg for improved performance.
  • Professional Design -- The Skeg Protector Kit features a 3mm thickened lower wear tab, preventing dragging on ramps and ensuring optimal performance during river riding. Additionally, it includes a drain hole at the bottom to prevent corrosion and freezing.
  • Durable Material -- Constructed from mirror-polished 18-gauge marine-grade 316 stainless steel, the Skeg Guard is built to withstand the elements and provide long-lasting protection.
  • Easy Installation -- Secures with self-locking hardware and installs in as little as 10 minutes. It can be installed with as little as 2-3 inches of skeg remaining, suitable for repairing a broken skeg. The package includes male and female locking screws, as well as an allen wrench for convenient installation.
  • Satisfaction Guarantee -- Yoursme aims to provide excellent products and best service for customers. You can simply return it if you are not satisfied with the product. We support 30 days full refund for return and 12 month warranty.
  • See more on Amazon...

Brand: Yoursme   |   Manufacturer: Yoursme

Warranty: 1 Year Seller Warranty

Amazon Price: $69.99 | as of 05/27/2024 (2:04am pst) *DETAILS

See On Amazon




  #3

27151 Stainless Steel Skeg Guard Fix Damaged Skeg Fit for Yamaha 150-175HP 2/4 Stroke / 200HP 2 Stroke HPDI /200 VMAX / 200HP 4 Stroke 2.8L I-4 / 300HP 4 Stroke

Asin: B0BXNXZVPJ   |   Model: 27151 Skeg Guard   |   PartNumber: 27151 Skeg Guard

Perfect Design – Design For Your Skeg, Drain Hole Prevents Against Corrosion/Freezing For Longer Wear. No Discernable Drag, Won't Compromise Performance, Avoid Expensive Repair Costs..
Satisfaction Guarantee - Besttruck Values Customers Shopping Experience And Provides Customers With A Good Shopping Environment. If You Are Not Satisfied With The Product, You Can Choose To Return It, We Support A 30-Day Full Refund And A One-Year Warranty..
Superior Material – Made Of 18-Gauge Marine-Grade 316 Stainless Steel. Mirror Polished To Improve The Gloss Of The Surface, Prevent Rust And Corrosion, Durable And Long Service Life. Meeting Or Exceeding Oem Specification..
Function – Protects Your Skeg From Corrosion And Wear In The Harsh Marine Environment. Thickened 3Mm Lower Wear Tab Reduces Ramp Dragging And Is Ideal For River Running. It Will Be Stronger And Much More Affordable Than Welding And Replacing A Lower Skeg..

Features

  • Wide Application Fits for Yamaha 150 - 175hp 2 & 4 Stroke 1984 - Present; 200hp 2 Stroke HPDI 2000 - 2012; 200hp 4 Stroke 2.8L I-4 2012 - Present; 300hp 4 Stroke 2007 - 2009; 350hp 4 Stroke 2007 - Present; I/O Sterndrive Models 1989 - 1993. Fits for Mercury 225 - 250hp EFI 4 Stroke 2003 - 2005; Fits for Suzuki 300hp 4 Stroke 2009; 250, 300hp 4 Stroke 2006-2008; 150, 175, 200, 225hp 2 Stroke 1986 - 2002. Replace for part 27151.
  • Function Protects your skeg from corrosion and wear in the harsh marine environment. Thickened 3mm lower wear tab reduces ramp dragging and is ideal for river running. It will be stronger and much more affordable than welding and replacing a lower skeg.
  • Perfect Design Design for your skeg, drain hole prevents against corrosion/freezing for longer wear. No discernable drag, won't compromise Performance, avoid expensive repair costs.
  • Superior Material Made of 18-Gauge Marine-Grade 316 Stainless Steel. Mirror polished to improve the gloss of the surface, prevent rust and corrosion, durable and long service life. Meeting or exceeding OEM specification.
  • Satisfaction Guarantee - Besttruck values customers shopping experience and provides customers with a good shopping environment. If you are not satisfied with the product, you can choose to return it, we support a 30-day full refund and a one-year warranty.
  • See more on Amazon...

Brand: besttruck   |   Manufacturer: besttruck

Dimensions: 1.10 x 17.60 x 7.90 inches

Warranty: 1 year warranty

Amazon Price: $77.99 | as of 05/27/2024 (2:04am pst) *DETAILS

See On Amazon




  #4

sixcow Skeg Guard Keel Guard 27341 for Mercury Mariner 40/50 / 60HP 2 & 4 Stroke 2003-Present & Evinrude Johnson 40-50 HP 4 Stroke 1999-2003, SkegGuard KeelGuar

Asin: B0BX22GXPG   |   Model: 27341   |   PartNumber: 27341

【Built For Marine Environment】 Keel Guard Constructed Of High Quality Marine-Grade 316 Stainless Steel Material With An Extra Reinforced 3Mm Lower Wear Tab Across The Bottom. Protect Against Ramp Dragging Or Damage From Hidden Debris. Corrosion Resistance And Resist Damage. Stable, Reliable And Long-Lasting Durability..
【100% Satisfaction Guarantee】 Your Satisfaction Is Our Priority. We Strive To Give Our Customers Excellent Service. All Sixcow Products Support 30-Day Money-Back Guarantee, 12-Month Warranty For Quality-Related Issues. Simply Return It For Your Warranty..
【Easy To Install】 It Takes A Breeze To Install. Simply Slide And Match The Skeg Guard To The Skeg. Use Mallet For Proper Fit. Drill Through With 1/4’’ Holes. Install Hardwares With Hex Wrenches Provided. Then, You’Re Ready To Go. Comes With Stainless Steel Self Locking Hardware And Hex Wrenches. Please Make Sure The Model Fits Well With The Skeg On Your Motor Before Purchase..
【Skeg Guard & Broken Skeg Fixer】 Indispensable Skegguard Not Only Protects Motor’S Skeg From Damage, Also Quickly Fixes Broken Skeg With As Little As 2-3 Inches Of Skeg Remaining. Meanwhile, Perfect Design With Drain Hole In The Bottom To Prevent Water From Collecting And Stagnating, Causing Corrosion. Matches Your Lower Unit To Ensure No Discernible Drag Or Compromise In Performance..

Features

  • Great Compatibility 27341 SkegGuard kit is perfectly compatible with Evinrude / Johnson 40 - 50 hp 4 Stroke 1999-2003, Mercury / Mariner 40 hp / 50 hp / 60 hp 2 & 4 Stroke 2003-Present. Also available for many selected inboard/outboard engines such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo and Yamaha engines. Replace OE Part Number: 27341
  • Skeg Guard & Broken Skeg Fixer Indispensable SkegGuard not only protects motor s skeg from damage, also quickly fixes broken skeg with as little as 2-3 inches of skeg remaining. Meanwhile, perfect design with drain hole in the bottom to prevent water from collecting and stagnating, causing corrosion. Matches your lower unit to ensure no discernible drag or compromise in performance.
  • Built for Marine Environment Keel Guard Constructed of high quality marine-grade 316 stainless steel material with an extra reinforced 3mm lower wear tab across the bottom. Protect against ramp dragging or damage from hidden debris. Corrosion resistance and resist damage. Stable, reliable and long-lasting durability.
  • Easy to Install It takes a breeze to install. Simply slide and match the skeg guard to the skeg. Use mallet for proper fit. Drill through with 1/4 holes. Install hardwares with hex wrenches provided. Then, you re ready to go. Comes with stainless steel self locking hardware and hex wrenches. Please make sure the model fits well with the skeg on your motor before purchase.
  • 100% Satisfaction Guarantee Your satisfaction is our priority. We strive to give our customers excellent service. All Sixcow products support 30-Day money-back guarantee, 12-Month warranty for quality-related issues. Simply return it for your warranty.
  • See more on Amazon...

Brand: sixcow   |   Manufacturer: sixcow

Warranty: 30-Day money-back guarantee, 12-Month warranty for quality-related issues

Amazon Price: $78.99 | as of 05/27/2024 (2:04am pst) *DETAILS

See On Amazon




  #5

MEGAWARE KEELGUARD SkegGuard with Drain Hole - Protects Against Ramp Dragging - Skeg Protector - Fits Mercury MerCruiser Bravo 1 & 3 1990-Present (Not Compatible with XR Sport Models)

Asin: B005BI66FE   |   Model: 27051   |   PartNumber: 27051   |   Ean: 0672057270516   |   UPC: 672057270516

Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27051 For Mercury Mercruiser: Bravo 1 & 3 1990-Present (Not Compatible With Xr Or Sport Models). Additional Models Are Available For Inboard And Outboard Motors Such As Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, Omc, Suzuki, Volvo, And Yamaha.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.

Features

  • Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
  • Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
  • Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
  • Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
  • Designed for Specific Motors SkegGuard 27051 for Mercury MerCruiser: Bravo 1 & 3 1990-Present (Not Compatible with XR or Sport Models). Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
  • See more on Amazon...

Brand: MEGAWARE KEELGUARD   |   Manufacturer: MEGAWARE KEELGUARD INC.

Dimensions: 0.20 x 0.20 x 0.08 Inches   |   Weight: 2.00 pounds

Amazon Price: $93.14 | as of 05/27/2024 (2:04am pst) *DETAILS
List Price: $107.03

See On Amazon




  #6

Megaware SkegGuard Replacement Hardware - Boat Accessories - Includes Genuine Self-Locking Screws and Wrenches - Compatible with All Megaware Skeg Guard Models - Easy Install Skeg Protector Tool Kit

Asin: B0CRKZL3LR   |   Ean: 0672057279991   |   UPC: 672057279991

Built To Last - Crafted From Marine-Grade Stainless Steel And Backed By Megaware's Renowned Craftsmanship, These Boat Skeg Replacement Bolts Resist Corrosion And Keep Your Skegguard Firmly In Place.
Navigate With Confidence - Knowing Your Skegguard Is Securely Fastened With Genuine Megaware Hardware Ensures Worry-Free Boating Adventures. Enjoy The Open Waters Knowing Your Motor Skeg Is Protected.
Quick And Easy Skeg Repair Kit - Replace Lost Or Damaged Hardware For Your Megaware Skeg Guard And Get Your Skeg Protector Back In Working Order.
Universal Fit For All Skeg Protectors - No More Chasing Specific Parts! These High-Quality Bolts Fit All Skegguard Models And Most Other Popular Skeg Protectors With 1/4" Drill Holes.

Features

  • Boat Tool Kit - Get everything you need for a hassle-free SkegGuard repair in one handy kit. Includes two Allen wrenches, five male and four female self-locking bolts pre-dipped with thread locker
  • Universal Fit for All Skeg Protectors - No more chasing specific parts! These high-quality bolts fit all SkegGuard models and most other popular skeg protectors with 1/4 drill holes
  • Built to Last - Crafted from marine-grade stainless steel and backed by Megaware's renowned craftsmanship, these boat skeg replacement bolts resist corrosion and keep your SkegGuard firmly in place
  • Quick and Easy Skeg Repair Kit - Replace lost or damaged hardware for your Megaware Skeg Guard and get your skeg protector back in working order
  • Navigate with Confidence - Knowing your SkegGuard is securely fastened with genuine Megaware hardware ensures worry-free boating adventures. Enjoy the open waters knowing your motor skeg is protected
  • See more on Amazon...

Brand: MEGAWARE KEELGUARD   |   Manufacturer: Megaware

Amazon Price: $19.95 | as of 05/27/2024 (2:04am pst) *DETAILS

See On Amazon




  #7

35-SS625 Skeg Guard Safe-Skeg Protector Tool Kit Marine-Grade Stainless Steel Replacement for Yamaha Honda Mercury/Mariner Force Nissan Tohatsu Outboard Engines

Asin: B0C1YJ9N9N   |   Model: YK230410   |   PartNumber: YK230410

【Easy Installation】Secures With Self-Locking Hardware And Installs In As Little As 10 Minutes. It Can Be Installed With As Little As 2-3 Inches Of Skeg Remaining, Suitable For Repairing A Broken Skeg. Package Comes With Male & Female Locking Screws, Allen Wrench, And Loctite 262..
【Ultimate Skeg Protection】The Safe-Skeg Is A Marine-Grade Stainless Steel Protector That Installs Over The Engine's Original Skeg. Use To Protect Your New Skeg From Damage, Or To Repair An Impact-Damaged Or Chipped Skeg For Better Performance..
【Satisfaction Guarantee】Bonbo Committed To Providing Customers With A Good Product Experience, If You Are Not Satisfied With Our Products, Simply Return It For A Full Refund In 30 Days. We Support 12 Months’ Warranty..
【Premium Material】Constructed From Mirror-Polished 18-Gauge Marine-Grade 316 Stainless Steel, 1/16" Thick Material, Seamlessly Engineered For Strength And Durability, The Skeg Guard Is Built To Withstand The Elements And Provide Long-Lasting Protection..
【Protect Your Skeg From Harsh Ocean Environment】Skeg Protector Kit Prevents Dragging On Ramps And Is Perfect For River Riding Without Compromising Performance. Additionally, It Has A Drain Hole To Prevent Corrosion Or Freezing..

Features

  • Wide Application The Safe-Skeg fits the following outboard engines: for Force 70-90 HP(Mercury) 2-Stroke 1998-2002, for Honda 75-90-115 HP 4-Stroke 1995-2007, for Mercury/Mariner 50-60 HP (Big Foot) 2 & 4-Stroke 2003+, for Mercury/Mariner 70-75-80 HP 2-Stroke 1984+, for Mercury/Mariner 70-90-100-115-125 HP Optimax 2-Stroke 1983+, for Nissan/Tohatsu 70-90-115-120-140 HP 2-Stroke 1993+, for Yamaha 60-70-80-90-100 HP 2 & 4 Stroke 1998-2001.
  • Protect Your Skeg From Harsh Ocean Environment Skeg Protector Kit prevents dragging on ramps and is perfect for river riding without compromising performance. Additionally, it has a drain hole to prevent corrosion or freezing.
  • Easy Installation Secures with self-locking hardware and installs in as little as 10 minutes. It can be installed with as little as 2-3 inches of skeg remaining, suitable for repairing a broken skeg. Package comes with male & female locking screws, allen wrench, and Loctite 262.
  • Premium Material Constructed from mirror-polished 18-gauge marine-grade 316 stainless steel, 1/16 thick material, seamlessly engineered for strength and durability, the Skeg Guard is built to withstand the elements and provide long-lasting protection.
  • Ultimate Skeg Protection The Safe-Skeg is a marine-grade stainless steel protector that installs over the engine's original skeg. Use to protect your new skeg from damage, or to repair an impact-damaged or chipped skeg for better performance.
  • Satisfaction Guarantee Bonbo committed to providing customers with a good product experience, if you are not satisfied with our products, simply return it for a full refund in 30 days. We support 12 months Warranty.
  • See more on Amazon...

Brand: Bonbo   |   Manufacturer: Bonbo

Dimensions: 0.30 x 11.00 x 5.10 inches

Amazon Price: $58.99 | as of 05/27/2024 (2:04am pst) *DETAILS

See On Amazon




  #8

35-SS645 Marine-Grade Stainless Steel Skeg Guard Safe-Skeg Protector Fit for Suzuki 150-225 HP 2&4 Stroke, for Yamaha 115-350 HP 2&4 Stroke, for Mercury, Marine Engines Inboard Skeg Protection

Asin: B0C2T1863S   |   Model: HI-H35646   |   PartNumber: HI-H35646

Function: Repair Or Replace Your Boat's Skeg To Keep The Prop Protected With The Skeg Guard For Mercury, Suzuki, And Yamaha Marine Engines. The Reinforced Lower Edge Helps Ensure Protection Against Damage. Avoid Causing Corrosion, And Protect The Marine Environment..
Installation: Easy To Install, Self Draining, Comes With Male & Female Stainless Locking Screws. Save Your Time And Money..
Satisfaction Guarantee--100% Satisfaction Guarantee. Please Feel Free To Contact Us If You Have Any Questions About Our Product..
Material: This Skeg Guard Protector Is Made Of 316 Marine Grade Stainless Steel, Treated With Anti-Oxidation And Anti-Corrosion, Sturdy And Durable. Self Draining, Comes With Male & Female Stainless Locking Screws. Package Includes Safe-Skeg, Mounting Hardware, Allen Wrench, And Loctite 262..
Fit For 1984-2002 Yamaha 115-130 Hp, 2-Stroke. Fit For 1984 To Present Yamaha 150 Hp, 2 And 4-Stroke. Fit For 1984-2002 Yamaha 115, 175, 200, 225, 250 Hp, 2-Stroke. Fit For 2009 To Present Yamaha 350 Hp, 4-Stroke. Fit For 1989-1993 Yamaha I/O 3.0L Thru 5.7L..

Features

  • APPLICATION: This 35-SS645 skeg protector fits for 2014 Mercury 150 HP Optimax. Fit for 1986-2002 Suzuki 150, 175, 200, 225 HP, 2-stroke. Fit for 2003 to present Suzuki 150, 175, 200, 225 HP, 4-stroke. Fit for 2006-2011 Suzuki 250SS & 300, 4-stroke.
  • Fit for 1984-2002 Yamaha 115-130 HP, 2-stroke. Fit for 1984 to present Yamaha 150 HP, 2 and 4-stroke. Fit for 1984-2002 Yamaha 115, 175, 200, 225, 250 HP, 2-stroke. Fit for 2009 to present Yamaha 350 HP, 4-stroke. Fit for 1989-1993 Yamaha I/O 3.0L thru 5.7L.
  • FUNCTION: Repair or replace your boat's skeg to keep the prop protected with the skeg guard for Mercury, Suzuki, and Yamaha Marine Engines. The reinforced lower edge helps ensure protection against damage. Avoid causing Corrosion, and protect the marine environment.
  • MATERIAL: This skeg guard protector is made of 316 marine grade stainless steel, treated with anti-oxidation and anti-corrosion, sturdy and durable. Self draining, comes with male & female stainless locking screws. Package includes safe-skeg, mounting hardware, allen wrench, and Loctite 262.
  • INSTALLATION: Easy to install, self draining, comes with male & female stainless locking screws. Save your time and money.
  • Satisfaction Guarantee--100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product.
  • See more on Amazon...

Brand: Hihitomorrow   |   Manufacturer: Hihitomorrow

Dimensions: 0.55 x 12.60 x 5.91 inches

Amazon Price: $65.99 | as of 05/27/2024 (2:04am pst) *DETAILS

See On Amazon




  #9

27051 Stainless Steel Skeg Guard Fix Damaged Skeg Fits for Mercury Mercruiser Bravo I & III 1990-Present, Not Compatible with XR/Sport Models

Asin: B0CQ71ZMTS   |   Model: 27051 Skeg Guard   |   PartNumber: 27051 Skeg Guard

Perfect Design – Design For Your Skeg, Drain Hole Prevents Against Corrosion/Freezing For Longer Wear. No Discernable Drag, Won't Compromise Performance, Avoid Expensive Repair Costs..
Satisfaction Guarantee - Besttruck Values Customers Shopping Experience And Provides Customers With A Good Shopping Environment. If You Are Not Satisfied With The Product, You Can Choose To Return It, We Support A 30-Day Full Refund And A One-Year Warranty..
Superior Material – Made Of 18-Gauge Marine-Grade 316 Stainless Steel. Mirror Polished To Improve The Gloss Of The Surface, Prevent Rust And Corrosion, Durable And Long Service Life. Meeting Or Exceeding Oem Specification..
Function – Protects Your Skeg From Corrosion And Wear In The Harsh Marine Environment. Thickened 3Mm Lower Wear Tab Reduces Ramp Dragging And Is Ideal For River Running. It Will Be Stronger And Much More Affordable Than Welding And Replacing A Lower Skeg..

Features

  • Application Fit for Mercury Mercruiser Bravo I & III 1990-Present. Not Compatible with XR or Sport Models. Replace for part 27051.
  • Function Protects your skeg from corrosion and wear in the harsh marine environment. Thickened 3mm lower wear tab reduces ramp dragging and is ideal for river running. It will be stronger and much more affordable than welding and replacing a lower skeg.
  • Perfect Design Design for your skeg, drain hole prevents against corrosion/freezing for longer wear. No discernable drag, won't compromise Performance, avoid expensive repair costs.
  • Superior Material Made of 18-Gauge Marine-Grade 316 Stainless Steel. Mirror polished to improve the gloss of the surface, prevent rust and corrosion, durable and long service life. Meeting or exceeding OEM specification.
  • Satisfaction Guarantee - Besttruck values customers shopping experience and provides customers with a good shopping environment. If you are not satisfied with the product, you can choose to return it, we support a 30-day full refund and a one-year warranty.
  • See more on Amazon...

Brand: besttruck   |   Manufacturer: besttruck

Dimensions: 1.10 x 17.60 x 7.90 inches

Warranty: 1 year warranty

Amazon Price: $54.99 | as of 05/27/2024 (2:04am pst) *DETAILS
List Price: $63.99

See On Amazon




  #10

Megaware Self-Adhesive DIY Keel Guard - Prolongs The Life of Your Boat - Protects from Abrasive Sand, Rocks and Oyster Beds - 9 Kit Sizes - 5 Inches Wide (Black)

Asin: B002PHW28Y   |   Model: 20207   |   PartNumber: 20207   |   Ean: 0014984004701, 0672057202074   |   UPC: 014984004701, 672057202074

Superior Engineering - This Patented Hydrodynamic Drag Reduction Design Is Produced Using The Highest Quality Materials And 3M Premium Adhesives. Pliable And Tough, The 5-Inch Wide Boat Keel Protection Easily Conforms To Your Boat's Keel; It’S Shock Absorbing, Exclusive Contoured Edge Design, And Drag Reduction Channels Won't Slow Your Boat Down.
Lifetime Warranty - The Megaware Keelguard Is So Tough And Reliable That We Include A Lifetime Warranty During Normal Use Of Your Boat, For As Long As You Own Your Boat..
9 Standard Length Kits - Our Boat Keel Guard Comes In 9 Different Sizes That Range From 4 To 12 Feet Long To Ensure You Have The Correct Size; Shields Come In 12 Colors That Will Not Fade Or Dull While Enhancing The Look Of Your Boat. Note: If The Size Of Your Boat Falls Between 2 Sizes, Order A Size Up For Additional Keel Protection.
Easy To Install - The Boat Protector Features An Exclusive Self-Sealing Contoured Edge That Creates A Clean, Tight Seal; No Messy Sealants Needed. Easy Install In 4 Simple Steps; Etch, Clean, Prime, Apply!.

Features

  • Boat Keel Protector - Protect your boat keel from sand, rocks, oyster beds, concrete ramps, and everyday wear and tear on the water with The Original Do-It-Yourself Keel Guard from Megaware. Note: compatible with fiberglass and some aluminum boats
  • Easy to Install - The boat protector features an exclusive self-sealing contoured edge that creates a clean, tight seal; no messy sealants needed. Easy install in 4 simple steps; etch, clean, prime, apply!
  • Superior Engineering - This patented hydrodynamic drag reduction design is produced using the highest quality materials and 3M premium adhesives. Pliable and tough, the 5-inch wide boat keel protection easily conforms to your boat's keel; it s shock absorbing, exclusive contoured edge design, and drag reduction channels won't slow your boat down
  • 9 Standard Length Kits - Our boat keel guard comes in 9 different sizes that range from 4 to 12 feet long to ensure you have the correct size; shields come in 12 colors that will not fade or dull while enhancing the look of your boat. Note: if the size of your boat falls between 2 sizes, order a size up for additional keel protection
  • Lifetime Warranty - The Megaware KeelGuard is so tough and reliable that we include a lifetime warranty during normal use of your boat, for as long as you own your boat.
  • See more on Amazon...

Brand: MEGAWARE KEELGUARD   |   Manufacturer: Megaware KeelGuard

Dimensions: 13.00 x 9.00 x 5.00 inches   |   Weight: 3.97 pounds

Warranty: limited warranty

Amazon Price: $141.55 | as of 05/27/2024 (2:04am pst) *DETAILS
List Price: $189.95

See On Amazon




  #11

Megaware - ScuffBuster Bow Guard for Boats - Protects from Scuffs and Scratches - Stainless Steel Shield with 3M Adhesive - Mirror Polished Finish (5.75 x 4.5 in)

Asin: B015D02QVM   |   Model: 2637   |   PartNumber: 2637   |   Ean: 0672057026373, 0687965400917, 0628204123891   |   UPC: 628204123891, 672057026373, 687965400917

Superior Engineering - Our Boat Bow Guard Is Made With Anti-Corrosive, 22-Gauge, 304 Stainless Steel Metal With A Mirror-Polished Finish. It Easily Bends To Your Boat's Hull To Shield The Gelcoat From Minor Damage When Trailering; Great For Most Fiberglass And Aluminum Boats.
Instructions Included - Our Informative Instructions Will Help You Achieve A Full Bond With The 3M Adhesive To Ensure It Is Properly Attached.
The Perfect Size - The Regular-Sized Bow Guard Measures 5.75 X 4.5 Inches To Ensure A Proper Fit For Standard-Size Or Larger Boats; Your Boat Bow Will Be Well Protected When Docking, So You No Longer Have To Worry About Damage To Your Hull Or Bow.
Easy To Install - This Bow Protector Features A 3M Adhesive That Is Easy To Install In Just 4 Simple Steps. Prep The Surface By Bending It To Conform To Your Hull And Peel Off The Backing. Attach The Protector To The Surface While Applying Pressure Using A Rubber Mallet To Activate The Pressure-Sensitive Adhesive.

Features

  • Boat Bow Protector - Protect your vessel from trailer roller scuffs, scratches, and everyday wear and tear on the water with the Scuffbuster Bow Guard from Megaware.
  • Easy to Install - This bow protector features a 3M adhesive that is easy to install in just 4 simple steps. Prep the surface by bending it to conform to your hull and peel off the backing. Attach the protector to the surface while applying pressure using a rubber mallet to activate the pressure-sensitive adhesive
  • Superior Engineering - Our boat bow guard is made with anti-corrosive, 22-gauge, 304 stainless steel metal with a mirror-polished finish. It easily bends to your boat's hull to shield the gelcoat from minor damage when trailering; great for most fiberglass and aluminum boats
  • The Perfect Size - The regular-sized bow guard measures 5.75 x 4.5 inches to ensure a proper fit for standard-size or larger boats; your boat bow will be well protected when docking, so you no longer have to worry about damage to your hull or bow
  • Instructions Included - Our informative instructions will help you achieve a full bond with the 3M adhesive to ensure it is properly attached
  • See more on Amazon...

Brand: MEGAWARE KEELGUARD   |   Manufacturer: MEGAWARE KEELGUARD INC.

Dimensions: 4.50 x 5.75 x 0.03 inches   |   Weight: 0.25 pounds

Amazon Price: $19.75 | as of 05/27/2024 (2:04am pst) *DETAILS
Used Price: $19.75

See On Amazon




  #12

sevencow 27341 Skeg Guard for Mercury Mariner 40HP-50HP-60HP 2 & 4 Stroke 2003-Present & Evinrude Johnson 40HP 50HP 4 Stroke 1999-2003 Marine-Grade Stainless Steel Safe-Skeg

Asin: B0BWQY9TKK

Easy To Install : With No Welding And No Epoxies Required, Replaces A Broken Skeg With As Little As 2-3 Inches Of Skeg Remaining.Our Inboard/Outboard Skeg Protector Installs In As Little As 10 Minutes! Built For A Custom Fit To The Motor, Just Slide And Tap It Into Place, Drill Your Holes And Tighten The Locking Bolts..
Satisfaction Service : If You Are Not Satisfied With Our Products.You Can Request A Full Refund Within 30 Days And Support A 12 Month Warranty.Professional And Sincere Service Allows You To Purchase Without Risk!.
High Quality : Made Of Mirror-Polished 18-Gauge Marine-Grade 316 Stainless Steel, Comes With Male & Female Stainless Locking Screws & Loctite..
Advantage : The Product Is Designed To Prevent And Reduce Wear, And The Amount Of Damage Encountered While Hitting Minor Floating Objects Or Submerged Stumps And Rocks. It Can Cover An Already Damaged Skeg,Also Includes A Drain Hole To Prevent Corrosion..

Features

  • Application : Skeg Guard For Mercury 40HP 50HP 60HP 2 Stroke & 4 Stroke 2003-Present,Also For Evinrude / Johnson 40HP 50HP 4 Stroke 1999-2003.(Replace part number 27341.)
  • Advantage : The product is designed to prevent and reduce wear, and the amount of damage encountered while hitting minor floating objects or submerged stumps and rocks. It Can Cover an Already Damaged Skeg,Also includes a drain hole to prevent corrosion.
  • Easy to install : With no welding and no epoxies required, Replaces a Broken Skeg with as Little as 2-3 Inches of Skeg Remaining.our inboard/outboard skeg protector installs in as little as 10 minutes! Built for a custom fit to the motor, just slide and tap it into place, drill your holes and tighten the locking bolts.
  • High quality : Made of Mirror-POLISHED 18-Gauge Marine-Grade 316 Stainless Steel, Comes with Male & Female Stainless Locking Screws & Loctite.
  • Satisfaction service : If you are not satisfied with our products.You can request a full refund within 30 days and support a 12 month warranty.Professional and sincere service allows you to purchase without risk!
  • See more on Amazon...

Brand: sevencow   |   Manufacturer: Sevencow LLC USA

Amazon Price: $78.99 | as of 05/27/2024 (2:04am pst) *DETAILS

See On Amazon




  #13

27061 Skeg Guard Stainless Steel Protective Skeg for Mercury 75HP 90HP 115HP 4 Stroke 2015-Present /150HP 175HP Optimax & Pro XS 2001-2018 Equipment Safe-Skeg

Asin: B0BYYS916H   |   Model: 27061 Skeg Guard   |   PartNumber: 27061 Skeg Guard

Easy To Install : With No Welding And No Epoxies Required, Replaces A Broken Skeg With As Little As 2-3 Inches Of Skeg Remaining.Our Inboard/Outboard Skeg Protector Installs In As Little As 10 Minutes! Built For A Custom Fit To The Motor, Just Slide And Tap It Into Place, Drill Your Holes And Tighten The Locking Bolts..
Satisfaction Service : If You Are Not Satisfied With Our Products.You Can Request A Full Refund Within 30 Days And Support A 12 Month Warranty.Professional And Sincere Service Allows You To Purchase Without Risk!.
High Quality : Made Of Mirror-Polished 18-Gauge Marine-Grade 316 Stainless Steel, Comes With Male & Female Stainless Locking Screws & Loctite..
Advantage : The Product Is Designed To Prevent And Reduce Wear, And The Amount Of Damage Encountered While Hitting Minor Floating Objects Or Submerged Stumps And Rocks. It Can Cover An Already Damaged Skeg,Also Includes A Drain Hole To Prevent Corrosion..

Features

  • Application : 27061 Skeg Guard For Mercury 75HP 90HP 115HP 4 Stroke 2.07" Ratio 2015-Present And 150HP 175HP Optimax & Pro XS 2001-2018 Replace part number 27061 .
  • Advantage : The product is designed to prevent and reduce wear, and the amount of damage encountered while hitting minor floating objects or submerged stumps and rocks. It Can Cover an Already Damaged Skeg,Also includes a drain hole to prevent corrosion.
  • Easy to install : With no welding and no epoxies required, Replaces a Broken Skeg with as Little as 2-3 Inches of Skeg Remaining.our inboard/outboard skeg protector installs in as little as 10 minutes! Built for a custom fit to the motor, just slide and tap it into place, drill your holes and tighten the locking bolts.
  • High quality : Made of Mirror-POLISHED 18-Gauge Marine-Grade 316 Stainless Steel, Comes with Male & Female Stainless Locking Screws & Loctite.
  • Satisfaction service : If you are not satisfied with our products.You can request a full refund within 30 days and support a 12 month warranty.Professional and sincere service allows you to purchase without risk!
  • See more on Amazon...

Brand: sevencow   |   Manufacturer: Sevencow LLC USA

Warranty: guarantee with 12 month's warranty

Amazon Price: $75.99 | as of 05/27/2024 (2:04am pst) *DETAILS

See On Amazon




  #14

MEGAWARE KEELGUARD SkegGuard with Drain Hole - Protects Against Ramp Dragging and Everyday Wear and Tear - Skeg Protector - Easy to Install - Fits Mercury MerCruiser Alpha 1 Generation 2 1991-Present

Asin: B005BI65UA   |   Model: 27031   |   PartNumber: 27031   |   Ean: 0672057270318   |   UPC: 672057270318

Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27031 For Mercury Mercruiser: Alpha 1 Generation 2 1991-Present. Additional Models Are Available For Inboard And Outboard Motors Such As Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, Omc, Suzuki, Volvo, And Yamaha.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.

Features

  • Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
  • Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
  • Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
  • Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
  • Designed for Specific Motors SkegGuard 27031 for Mercury MerCruiser: Alpha 1 Generation 2 1991-Present. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
  • See more on Amazon...

First Available: 10/17/2017

Brand: MEGAWARE KEELGUARD   |   Manufacturer: MEGAWARE KEELGUARD INC.

Dimensions: 20.00 x 1.25 x 9.00 Inches   |   Weight: 1.50 Pounds

Amazon Price: $85.81 | as of 05/27/2024 (2:04am pst) *DETAILS

See On Amazon




  #15

MEGAWARE KEELGUARD SkegGuard with Drain Hole - Protects Against Ramp Dragging - Skeg Protector - Easy to Install - Fits Mercury, Force, Honda, Nissan/Tohatsu - See Listing for Motor Fitment Details

Asin: B005BI67OO   |   Model: 27071   |   PartNumber: 27071   |   Ean: 0672057270714   |   UPC: 672057270714

Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27071 For Mercury. Force, Honda, Nissan/Tohatsu - See Listing For Motor Fitment Details. Additional Models Are Available For Inboard And Outboard Motors Such As Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, Omc, Suzuki, Volvo, And Yamaha.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.

Features

  • Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
  • Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
  • Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
  • Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
  • Designed for Specific Motors SkegGuard 27071 for Mercury. Force, Honda, Nissan/TOHATSU - See Listing for Motor Fitment Details. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
  • See more on Amazon...

Brand: MEGAWARE KEELGUARD   |   Manufacturer: MEGAWARE KEELGUARD INC.

Dimensions: 20.00 x 1.25 x 9.00 inches   |   Weight: 1.40 pounds

Warranty: Warranty

Amazon Price: $85.71 | as of 05/27/2024 (2:04am pst) *DETAILS

See On Amazon




  #16

PereGuard Power Powerboat Hull Guard Black (3 Feet) Abrasion Resistance Boat Protector

Asin: B095MFVFTX   |   Ean: 0615499533818   |   UPC: 615499533818

Application: Simple To Apply. Clean The Surface, Peel Off The Backing Paper Off The Guard And Then Apply The Guard. Pereguard Works On Thermoformed Boats, Fiberglass, Rotomold Plastic, Aluminum, And Many Other Materials..
Uses: Ideal For Powerboats, Catamarans, Jet Skis And Pontoon Boats..
Design: Pereguard Is Made From Durable Pvc And Has A Smooth Surface To Reduce Friction In The Water. The Adhesive Is Industry Strength And Works Well In All Environments. The Edges Are Tapered To Seal With The Boat And Keep Dirt And Grime Away From The Adhesive Layer..
Color: Black Width: 6 Inches Thickness: 1/8”.

Features

  • INCLUDED: Roll of PereGuard, Final Prep Wipes to ensure the surface is clean and promote strong adhesion, and detailed Instructions
  • COLOR: Black WIDTH: 6 Inches THICKNESS: 1/8
  • APPLICATION: Simple to apply. Clean the surface, peel off the backing paper off the Guard and then apply the Guard. PereGuard works on thermoformed boats, fiberglass, rotomold plastic, aluminum, and many other materials.
  • DESIGN: PereGuard is made from durable PVC and has a smooth surface to reduce friction in the water. The adhesive is industry strength and works well in all environments. The edges are tapered to seal with the boat and keep dirt and grime away from the adhesive layer.
  • USES: Ideal for powerboats, catamarans, jet skis and pontoon boats.
  • See more on Amazon...

Brand: PereGuard   |   Manufacturer: PereGuard

Amazon Price: $45.00 | as of 05/27/2024 (2:04am pst) *DETAILS

See On Amazon




  #17

35-SS625 Safe-Skeg Protector Kit Fit for Mercury/Mariner, Honda, Yamaha, Nissan, Tohatsu, and Force Models Outboard Skegshield Safe-Skeg Protector Kit

Asin: B0C27ZWX2R   |   Model: 35-SS625   |   PartNumber: 35-SS625

【Special Skeg Tool】35-Ss625 Safe-Skeg A Bolt-On Steel Cover, Attaches To The Existing Lower Unit Skeg To Bring Back The Original Skeg Performance, Handling, And Appearance..
【Easy Self-Install】 35-Ss625 Safe-Skeg Protector Kit Includes Skeg Mounting Hardware, An Allen Wrench, And Thread-Locking Adhesive. It Takes About 10 Minutes For Installation, You Only Need Conventional Hammers And Air Drills To Tap The Skeg Guard Into The Right Place And Finish The Drilling Work..
【Marine Grade Stainless Steel】Polished Finish Skeg Guard 1.5Mm Material Thickness, Made Of Marine Grade Stainless Steel, Excellent Material To Protect The New Skeg That Offers More Durable, Stable Structures Metal Cover..
【Wide Application】35-Ss625 Safe-Skeg Universal Skeg Repair Compatible With Other Brands Outboards: (1) Nissan 70 90 115 120 140 2-Stroke Outboard(1993-2010) ; (2) For Tohatsu 70 90 115 120 140 2-Stroke Outboard(1993+ ) ; (3) For Yamaha 60 70 80 90 100 2 & 4-Stroke Outboard(1998-2001); (4) For Honda 75 90 115 4-Stroke Outboard(1995-2007)..

Features

  • Wide Application 35-SS625 skeg guard universal fit for Mercury/Mariner 2 & 4 -stroke Outboard 50 60 Big Foot (2003+); 70 75 80 Outboard (1984+ ); 70 90 100 115 125 Optimax Outboard (1983+ ); For Force Outboard 70 90 made by Mercury (1998-2002).
  • Wide Application 35-SS625 safe-skeg universal skeg repair compatible with other brands outboards: (1) Nissan 70 90 115 120 140 2-stroke Outboard(1993-2010) ; (2) For Tohatsu 70 90 115 120 140 2-stroke Outboard(1993+ ) ; (3) For Yamaha 60 70 80 90 100 2 & 4-stroke Outboard(1998-2001); (4) For Honda 75 90 115 4-stroke Outboard(1995-2007).
  • Special Skeg Tool 35-SS625 safe-skeg a bolt-on steel cover, attaches to the existing lower unit skeg to bring back the original skeg performance, handling, and appearance.
  • Marine Grade Stainless Steel Polished finish skeg guard 1.5mm material thickness, made of marine grade stainless steel, excellent material to protect the new skeg that offers more durable, stable structures metal cover.
  • Easy Self-Install 35-SS625 safe-skeg protector kit includes skeg mounting hardware, an Allen wrench, and thread-locking adhesive. It takes about 10 minutes for installation, you only need conventional hammers and air drills to tap the skeg guard into the right place and finish the drilling work.
  • See more on Amazon...

Brand: Camoo   |   Manufacturer: Camoo

Dimensions: 1.10 x 12.60 x 7.50 Inches

Amazon Price: $58.99 | as of 05/27/2024 (2:04am pst) *DETAILS

See On Amazon




  #18

Gator Guards KeelShield Keel Guard - Helps Prevent Damage, Scars and Scratches - DIY Installation - Compatible with Fiberglass and Most Aluminum Boats - Made in the USA - 4 to 12 Lengths - Black

Asin: B00I5MG0JK   |   Model: KS-4BLK   |   PartNumber: KS-4BLK   |   Ean: 0604014000102   |   UPC: 604014000102

Diy Installation: Thanks To An Exclusive 3M Adhesion System, Applying Your Keel Guard Is As Easy As Prep, Peel, Stick! With No Mixing Or Curing Required, You’Ll Finish The Job In An Hour. The Thickest Marine Adhesive Around, It Stays Firmly In Place..
Lifetime Guarantee: We’Re So Confident In Our Boat Keel Guards, They’Re Backed With A Limited Lifetime Guarantee Against Defects In Materials Or Workmanship! If You Have Any Problems Or Questions, Don’T Hesitate To Let Our Customer Service Team Know..
Made In The Usa: Combining The Strength Of Pure Urethane Polymers With The Quality Of American Workmanship, Our Protector Kit Is The One Boaters Trust! Measuring 5” Wide With Lengths From 4’ To 12’ & Available In A Range Of Colors, Get A Perfect Match!.
Versatile Design: Whether You Own A Bass Boat, A Runabout Or A Recreational Watercraft, Our Keel Protector Keeps Your Vessel In Tip Top Shape! Compatible With Both Fiberglass And Most Aluminum Boats, It Safeguards Your Precious Investment..

Features

  • RELIABLE, LONG LASTING PROTECTION: From rocks and concrete to ramps and docks, our keel guard is your boat s first line of defense against damage! Incredibly strong and durable, our hull guard helps protect against abrasions, scratches and scars.
  • VERSATILE DESIGN: Whether you own a bass boat, a runabout or a recreational watercraft, our keel protector keeps your vessel in tip top shape! Compatible with both fiberglass and most aluminum boats, it safeguards your precious investment.
  • DIY INSTALLATION: Thanks to an exclusive 3M adhesion system, applying your keel guard is as easy as prep, peel, stick! With no mixing or curing required, you ll finish the job in an hour. The thickest marine adhesive around, it stays firmly in place.
  • MADE IN THE USA: Combining the strength of pure Urethane Polymers with the quality of American workmanship, our protector kit is the one boaters trust! Measuring 5 wide with lengths from 4 to 12 & available in a range of colors, get a perfect match!
  • LIFETIME GUARANTEE: We re so confident in our boat keel guards, they re backed with a limited lifetime guarantee against defects in materials or workmanship! If you have any problems or questions, don t hesitate to let our customer service team know.
  • See more on Amazon...

First Available: 09/26/2017

Brand: Gator Guards   |   Manufacturer: Gator Guards

Dimensions: 12.00 x 8.00 x 5.00 inches   |   Weight: 1.73 Pounds

Warranty: Manufacturer Warranty

Amazon Price: $115.36 | as of 05/27/2024 (2:04am pst) *DETAILS
Used Price: $84.99

See On Amazon




  #19

Megaware Keelguard SkegGuard with Drain Hole - Protects Against Ramp Dragging Skeg Protector Fits Yamaha 150-175HP 2 & 4 Stroke 1984-Present, 200HP 4 St. Inline 4 2012-Present, 350 4 St. 2007-Present

Asin: B005BI69J2   |   Model: 27151   |   PartNumber: 27151   |   Ean: 0672057271513   |   UPC: 672057271513

Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27151 For Yamaha 150-175Hp 2 & 4 Stroke 1984-Present, 200Hp 4 St. Inline 4 2012-Present, 350 4 St. 2007-Present. Additional Models Are Available For Inboard And Outboard Motors Such As Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, Omc, Suzuki, Volvo, And Yamaha.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.

Features

  • Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
  • Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
  • Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
  • Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
  • Designed for Specific Motors SkegGuard 27151 for Yamaha 150-175HP 2 & 4 Stroke 1984-Present, 200HP 4 St. Inline 4 2012-Present, 350 4 St. 2007-Present. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
  • See more on Amazon...

First Available: 10/17/2017

Brand: MEGAWARE KEELGUARD   |   Manufacturer: MEGAWARE KEELGUARD INC.

Dimensions: 20.00 x 1.25 x 9.00 inches   |   Weight: 1.60 pounds

Warranty: Warranty.

See On Amazon




  #20

sevencow 99022 Skeg Guard for Volvo Penta Sterndrive SX Drive Single Prop 1995-2006 Safe-Skeg Protector Marine-Grade Stainless Steel

Asin: B09HT28MMJ

Easy To Install : With No Welding And No Epoxies Required, Replaces A Broken Skeg With As Little As 2-3 Inches Of Skeg Remaining.Our Inboard/Outboard Skeg Protector Installs In As Little As 10 Minutes! Built For A Custom Fit To The Motor, Just Slide And Tap It Into Place, Drill Your Holes And Tighten The Locking Bolts..
Kit Includes: 1*Skeg Guard And Installation Accessories..
High Quality : Made Of Mirror-Polished 18-Gauge Marine-Grade 316 Stainless Steel, Comes With Male & Female Stainless Locking Screws..
Advantage : Inboard Skeg Protection Against Reef, Rock And Ramp Damage.Can Cover An Already Damaged Skeg,Also Includes A Drain Hole To Prevent Corrosion..

Features

  • Application : For Volvo Penta SX Drive Single Prop 1995-2006.NOTE: this skeggard will not fit 250, 270, 280 out drive. Replace part number 99022.
  • Advantage : Inboard Skeg Protection Against Reef, Rock and Ramp Damage.Can Cover an Already Damaged Skeg,Also includes a drain hole to prevent corrosion.
  • Easy to install : With no welding and no epoxies required, Replaces a Broken Skeg with as Little as 2-3 Inches of Skeg Remaining.our inboard/outboard skeg protector installs in as little as 10 minutes! Built for a custom fit to the motor, just slide and tap it into place, drill your holes and tighten the locking bolts.
  • High quality : Made of Mirror-POLISHED 18-Gauge Marine-Grade 316 Stainless Steel, Comes with Male & Female Stainless Locking Screws.
  • Kit includes: 1*Skeg Guard and Installation accessories.
  • See more on Amazon...

Brand: sevencow   |   Manufacturer: Wen wen top

Amazon Price: $69.99 | as of 05/27/2024 (2:04am pst) *DETAILS

See On Amazon





Looking For Something Else? Search

Home & Garden


Home Improvement


Industrial


Electronics


Office


Car & Automotive


Sporting Goods


Beauty Supplies


Health & Personal Care


Fashion


Toys and Hobby



Additional Categories


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.
As an Amazon Associate we earn from qualifying purchases.