Amanaote Stainless Steel 1 Inches Diameter Tube Strap Tension Clip Pipe Clamp(Pack Of 10 Sets)
Asin: B00EV2663S | Ean: 0702458456735, 0632963974977 | UPC: 702458456735, 632963974977
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Please Note:Some Customers Reflect That The Size Of The Pipe Cramp Is Small, Actually The Size Of The Pipe Cramp Smaller Little Bit Is Better For Fasten The Pipe To The Wall. When Installing The Pipe Cramp, Pls Rotate The Screw Hard To Make The Screw Hole Close To The Wall So That The Pipe Cramp Can Fasten The Pipe To The Wall Better..
Drilled Ends (Not Included) For Additional Support From A Wall Or Ceiling.
Features
- Bolt these around any duct and attach a piece of metal conduit with flattened and
- Drilled ends (not included) for additional support from a wall or ceiling
- Please note:some customers reflect that the size of the pipe cramp is small, actually the size of the pipe cramp smaller little bit is better for fasten the pipe to the wall. When installing the pipe cramp, pls rotate the screw hard to make the screw hole close to the wall so that the pipe cramp can fasten the pipe to the wall better.
- See more on Amazon...
Brand: Amanaote | Manufacturer: Amanaote
See On Amazon Similar To Amanaote Stainless Steel 1 Inches
#1
Amana Tool 51377-Z SC Spiral O Single Flute Aluminum Cutting 1/4 D x 3/4 CH x 1/4 SHK x 2 Inch Long Up-Cut ZrN Coated Router Bit withMirror Finish
Asin: B07GR8H9XD | Model: 51377-Z | PartNumber: 51377-Z | Ean: 0738685555132 | UPC: 738685555132
Specifications: Direction: Up-Cut (D) Diameter: 1/4 (B) Cutting Height: 3/4 (D) Shank: 1/4 Overall Length (L): 2 Flutes: 1 Surface Coating: Zrn.
Advantages Of Zrn Coating: Creates Incredibly Precise Detail Work Optimized Flute Geometry And Low Total Indicated Runout (Tir) Guarantees Clean Cuts, Essentially Eliminates Sanding And Reduces Chatter When Used With Low Tir Spindles Creates A Harder And Tougher Cutting Ceramic Over Carbide Edge, Allowing For A Prolonged Cutting Edge Life And Helps To Prevent The Build-Up/Galling Of Material In The Flutes While Cutting Pvd Ceramic Hardcoat Designed For Soft, Gummy And Abrasive Materials High As.
Features
- Made in the USA
- Advantages of ZrN Coating: Creates incredibly precise detail work Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter when used with low TIR spindles Creates a harder and tougher cutting ceramic over carbide edge, allowing for a prolonged cutting edge life and helps to prevent the build-up/galling of material in the flutes while cutting PVD ceramic hardcoat designed for soft, gummy and abrasive materials High as
- SPECIFICATIONS: Direction: Up-Cut (D) Diameter: 1/4 (B) Cutting Height: 3/4 (d) Shank: 1/4 Overall Length (L): 2 Flutes: 1 Surface Coating: ZrN
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #2
Amana Tool - 47148 Carbide Tipped Laminate Trimmer with Euro Square Bearing 3/4 Dia x 5/8
Asin: B0112TVANS | Model: 47148 | PartNumber: 47148 | Ean: 0738685471487 | UPC: 738685471487
Shank (D) 1/4.
Replacement Bearing Sqb102.
Overall Length (L) 2-3/8.
Cutting Height (B) 5/8.
Features
- Diameter (D) 3/4
- Cutting height (B) 5/8
- Shank (D) 1/4
- Overall length (L) 2-3/8
- Replacement bearing Sqb102
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.00 Pounds
See On Amazon #3
Amana Tool - HSS1200 High Speed Steel (HSS) Foam Cutting Ball End Extended Reach 1/8 Radiu
Asin: B01M7M8NVN | Model: HSS1200 | PartNumber: HSS1200 | Ean: 0738685120033 | UPC: 738685120033
(R) Radius: 1/8.
(D) Shank: 3/8.
(B) Cutting Height: 4.
(D) Diameter: 1/4.
Features
- Direction: up-cut
- (D) Diameter: 1/4
- (R) radius: 1/8
- (B) Cutting Height: 4
- (D) shank: 3/8
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.00 Pounds
See On Amazon #4
Amanaote Metal D-Rings Buckle 1" Inside Diameter Non-Welded for Webbing Sewing DIY - Red - Pack of 10
Asin: B094G1D7H8 | Ean: 0727542293874 | UPC: 727542293874
Material: Metal, Non Welded Dee Ring With Good Load Bearing Characteristics, Easy To Install, Which Is Convenient To Use.
Multi-Purpose: Semi-Circular Ring Can Be Used For Numerous Applications Such As Harnesses, Clothes, Dog Leashes, Backpacks, Or Purse Strap Etc.
Surface: Electroplate, Sturdy And Durable, Not Easy To Fade; Ideal For Use On Many Items And You Can Use Two Together As A Webbing Adjuster And Lock.
Dimensions: Inner Width: 1 Inch (25 Mm), Inner Height: 0.6 Inch (15 Mm); Wire Thickness: 0.16 Inch (4 Mm).
Features
- The metal D-rings are one of this versatile hardware that is very useful. They are widely used in everything from bags and clothes to pet collars and horse bits. In Amanaote You will find non-welded D-shaped buckle in various sizes and colors to meet your hardware needs and style preferences
- DIMENSIONS: Inner width: 1 inch (25 mm), Inner height: 0.6 inch (15 mm); Wire thickness: 0.16 inch (4 mm)
- MATERIAL: Metal, Non welded Dee ring with good load bearing characteristics, Easy to install, which is convenient to use
- SURFACE: Electroplate, Sturdy and durable, not easy to fade; Ideal for use on many items and you can use two together as a webbing adjuster and lock
- MULTI-PURPOSE: Semi-Circular ring can be used for numerous applications such as harnesses, clothes, dog leashes, backpacks, or purse strap etc
- See more on Amazon...
Brand: Amanaote | Manufacturer: Amanaote
See On Amazon #5
Amana Tool - HSS11005 HSS Panel Pilot 1/2 Dia x 1" 2 Shank Spiral
Asin: B001PTZVRC | Model: HSS11005 | PartNumber: HSS11005 | Ean: 0738685110058 | UPC: 738685110058
Shank (D): 1/2.
Type: Spiral.
Overall Length (L): 3-1/2.
Cutting Height (B): 1.
Features
- Diameter (D): 1/2
- Cutting height (B): 1
- Shank (D): 1/2
- Overall length (L): 3-1/2
- Type: spiral
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.00 Pounds
See On Amazon #6
Amana Tool HSS1625 Single Flute Spiral Router Bits Metal Aluminum Cutting 5/16 Dia x 1 x 1/2 Inch Shank Up-Cut Router Bit High Speed Steel
Asin: B07HFDCP3C | Ean: 0738685016251 | UPC: 738685016251
Smooth Finishes – Double Flute Router Bits Provide A Smooth Finish When Grooving And Slotting Than The Single Flute Router Bits..
Industrial-Quality Tools – Amana Tool Is A Worldwide Leading Tool Provider With A Usa-Based Corporate Headquarters, Specializing In Industrial-Quality, Cutting Tools..
Superior Quality – High Speed Steel Aluminum/Non-Ferrous Metal Router Bits For Cutting Edge Quality And Performance..
For Aluminum Cutting – Use The Aluminum Cutting Bit For Cutting Fomex With Aluminum Face, Sheet, Block And Plate Aluminum, Aluminum 5052, And Wood..
Features
- UP-CUT ROUTER BIT The up cut router bits are designed for aluminum cutting. Available in single and double flute
- FOR ALUMINUM CUTTING Use the aluminum cutting bit for cutting Fomex with Aluminum Face, Sheet, Block and Plate Aluminum, Aluminum 5052, and Wood.
- SMOOTH FINISHES Double flute router bits provide a smooth finish when grooving and slotting than the single flute router bits.
- SUPERIOR QUALITY High speed steel Aluminum/non-ferrous metal router bits for cutting edge quality and performance.
- INDUSTRIAL-QUALITY TOOLS Amana Tool is a worldwide leading tool provider with a USA-based Corporate headquarters, specializing in industrial-quality, cutting tools.
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.00 pounds
See On Amazon #7
Amanaote Stainless Steel 1 Inches Diameter Tube Strap Tension Clip Pipe Clamp(Pack Of 15 Sets)
Asin: B00EV2795W | Ean: 0632963974991 | UPC: 632963974991
Drilled Ends (Not Included) For Additional Support From A Wall Or Ceiling.
Features
- Bolt these around any duct and attach a piece of metal conduit with flattened and
- Drilled ends (not included) for additional support from a wall or ceiling
- See more on Amazon...
Brand: Amanaote | Manufacturer: Amanaote
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #8
Amana Tool - Straight Cutter 1-1/4" Bore (61482), Industrial Grade
Asin: B000P4UT3E | Model: 61482 | PartNumber: 61482 | Ean: 0738685641828 | UPC: 738685641828
U.S.A. Corporate Headquarters And Warehouse, Located In New York.
Industrial Grade.
Commitment To Offer The Highest Consistent Quality And Innovative Products.
Solutions For Manufacturers, Fabricators, Display And Cabinet Professionals.
Features
- Devotion to consistently providing the highest quality
- Solutions for manufacturers, fabricators, display and cabinet professionals
- U.S.A. Corporate headquarters and warehouse, located in new York
- Commitment to offer the highest consistent quality and innovative products
- Industrial grade
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.01 pounds
See On Amazon #9
Amana Tool - 51501 Solid Carbide CNC Spiral 'O' Flute, Aluminum Cutting 1/8 Dia x 1/2 x 1
Asin: B00O4TFEUO | Model: 51501 | PartNumber: 51501 | Ean: 0738685515013 | UPC: 738685515013
(B) Cutting Height 1/2.
Overall Length (L) 2.
(D) Shank 1/8.
(D) Diameter 1/8.
Features
- Direction down-cut
- (D) diameter 1/8
- (B) Cutting height 1/2
- (D) shank 1/8
- Overall length (L) 2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #10
Amana Tool - 51487 Solid Carbide CNC Spiral 'O' Single Flute, Aluminum Cutting 1/2 Dia x 1
Asin: B00IDEOQ0A | Model: 51487 | PartNumber: 51487 | Ean: 0738685514870 | UPC: 738685514870
(B) Cutting Height 1-1/8.
Overall Length (L) 3-1/2.
(D) Shank 1/2.
(D) Diameter 1/2.
Features
- Direction up-cut
- (D) diameter 1/2
- (B) Cutting height 1-1/8
- (D) shank 1/2
- Overall length (L) 3-1/2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.00 Pounds
See On Amazon #11
Amana Tool HSS1490 Plastic Cutting, Single Straight O Flute 1/16 D x 3/16 CH x 1/4 SHK x 2 Inch Long High Speed Steel (HSS) Router Bit
Asin: B09CHBT2WQ | Ean: 0738685014905 | UPC: 738685014905
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.02 Pounds
See On Amazon #12
Amana Tool - NRC-A01 Pair of Solid Carbide Nova Chamfer 30 Deg x 1-1/2 Dia x 11/16 Knives
Asin: B06XG8THQ8 | Model: NRC-A01 | PartNumber: NRC-A01 | Ean: 0738685010105 | UPC: 738685010105
Cutting Height (B): 11/16.
Use W/ Tool No.: Ns-104 & Ns-106.
B1: 14.2Mm (9/16).
Angle (A°): 30°.
Features
- Diameter (D): 1-1/2
- Angle (a ): 30
- Cutting height (B): 11/16
- B1: 14.2mm (9/16)
- Use w/ tool No.: ns-104 & ns-106
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #13
Amana Tool - REPL. Carbide Profile 1 Cutter1 (RCK-291L), Industrial Grade
Asin: B000P4UP1K | Model: RCK-291L | PartNumber: RCK-291L | Ean: 0738685725917 | UPC: 738685725917
U.S.A. Corporate Headquarters And Warehouse, Located In New York.
Industrial Grade.
Commitment To Offer The Highest Consistent Quality And Innovative Products.
Solutions For Manufacturers, Fabricators, Display And Cabinet Professionals.
Features
- Devotion to consistently providing the highest quality
- Solutions for manufacturers, fabricators, display and cabinet professionals
- U.S.A. Corporate headquarters and warehouse, located in new York
- Commitment to offer the highest consistent quality and innovative products
- Industrial grade
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #14
Amana Tool - 55320 Carbide Tipped V Paneling 45 Deg x 1-13/16 Dia x 1/2 to 1-3/16 x 1/2 In
Asin: B000P4OGYM | Model: 55320 | PartNumber: 55320 | Ean: 0738685953204 | UPC: 738685953204
Cutting Height (B): 1/2 To 1-3/16.
Overall Length (L): 3-1/8.
Shank (D): 1/2.
Angle (A°): 45°.
Features
- Diameter (D): 1-13/16
- Angle (a ): 45
- Cutting height (B): 1/2 to 1-3/16
- Shank (D): 1/2
- Overall length (L): 3-1/8
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.00 Pounds
Warranty: Limited Lifetime Guarantee
See On Amazon
Looking For Something Else?
Search