Bassett MSE-4 Solid Carbide General Purpose End Mill, Uncoated Finish, 30 Degree Helix, Radius Corner End, .31" Cut Length, 3/16" Cut Dia., 2" Length
Asin: B00E49WIDK | Model: B52652 | PartNumber: B52652 | Ean: 0662355339527 | UPC: 662355339527
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Weight: 0.00 pounds
See On Amazon Similar To Bassett MSE4 Solid Carbide General
#1
Bassett B10230 MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1)
Asin: B00E49CVCS | Model: B10230 | PartNumber: B10230 | Ean: 0662355329252 | UPC: 662355329252
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries
Dimensions: 0.70 x 0.60 x 3.30 inches | Weight: 0.02 Pounds
See On Amazon #2
Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiAlN Coated, 4 Flute, 30 Degrees Helix, Radius Corner End, 0.375" Cutting Length, 7/64" Cutting Diameter, 1-1/2" Length (Pack of 1)
Asin: B00E4AGS8A | Model: B69105 | PartNumber: B69105 | Ean: 0662355356692 | UPC: 662355356692
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Aluminum Nitride Coatings Become Self-Lubricating When Used At Very High Speeds, Making Them Ideal For Cutting Without Coolant ("Dry Machining").
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (dry machining)
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
First Available: 03/12/2017
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Weight: 0.00 pounds
See On Amazon #3
Bassett MSE-4 Solid Carbide General Purpose End Mill,Uncoated Finish, 30 Degree Helix, Radius Corner End, .13" Cut Length, 3/32" Cut Dia., 1.5" Length
Asin: B00E49WGFU | Model: B52646 | PartNumber: B52646 | Ean: 0662355339497 | UPC: 662355339497
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Weight: 0.00 Pounds
See On Amazon #4
Bassett MSE-4 Solid Carbide General Purpose End Mill,Uncoated Finish, 30 Degree Helix, Radius Corner End, .63" Cut Length, 7/32" Cut Dia., 2.5" Length
Asin: B00E49TQ94 | Model: B52116 | PartNumber: B52116 | Ean: 0662355337851 | UPC: 662355337851
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Weight: 0.00 pounds
See On Amazon #5
Bassett MSE-4 Solid Carbide General Purpose End Mill,Uncoated Finish, 30 Degree Helix, Radius Corner End, .19" Cut Length, 1/16" Cut Dia., 1.5" Length
Asin: B00E49THQ6 | Model: B52101 | PartNumber: B52101 | Ean: 0662355337752 | UPC: 662355337752
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
First Available: 03/12/2017
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #6
Bassett MSE-2 Solid Carbide General Purpose End Mill, Uncoated Finish, 30 Degree Helix, Radius Corner End, .56" Cut Length, 5/32" Cut Dia., 2" Length
Asin: B00E49SMV2 | Model: B52010 | PartNumber: B52010 | Ean: 0662355337271 | UPC: 662355337271
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
2-Flute End Mills Are Generally Used For Plunging, Slotting, And Heavy Peripheral Cuts.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 2-flute end mills are generally used for plunging, slotting, and heavy peripheral cuts
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Weight: 0.00 pounds
See On Amazon #7
Bassett MSE-4 Series Solid Carbide General Purpose End Mill, Uncoated (Bright) Finish, 4 Flute, 30 Degrees Helix, Radius Corner End, 1.5" Cutting Length, 1/4" Cutting Diameter, 4" Length (Pack of 1)
Asin: B00E49RJMA | Model: B51454 | PartNumber: B51454 | Ean: 0662355336823 | UPC: 662355336823
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #8
Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiCN Coated, 4 Flute, 30 Degrees Helix, Radius Corner End, 0.75" Cutting Length, 9/32" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E46E106 | Model: B01489 | PartNumber: B01489 | Ean: 0662355321423 | UPC: 662355321423
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Carbonitride Coatings Are Harder And More Wear-Resistant Than Tin For Improved Tool Life And Faster Cutting Speeds.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Weight: 0.00 pounds
See On Amazon #9
Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiAlN Coated, 4 Flute, 30 Degrees Helix, 0.040" Radius Corner End, 1" Cutting Length, 3/8" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E4DFH4I | Model: B69172 | PartNumber: B69172 | Ean: 0662355356975 | UPC: 662355356975
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Aluminum Nitride Coatings Become Self-Lubricating When Used At Very High Speeds, Making Them Ideal For Cutting Without Coolant ("Dry Machining").
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (dry machining)
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #10
Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiAlN Coated, 4 Flute, 30 Degrees Helix, 0.040" Radius Corner End, 1" Cutting Length, 3/8" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E4DFFIG | Model: B69132 | PartNumber: B69132 | Ean: 0662355356821 | UPC: 662355356821
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Aluminum Nitride Coatings Become Self-Lubricating When Used At Very High Speeds, Making Them Ideal For Cutting Without Coolant ("Dry Machining").
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (dry machining)
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #11
Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiAlN Coated, 4 Flute, 30 Degrees Helix, 0.030" Radius Corner End, 1" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1)
Asin: B00E4DFBX0 | Model: B69173 | PartNumber: B69173 | Ean: 0662355356982 | UPC: 662355356982
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Aluminum Nitride Coatings Become Self-Lubricating When Used At Very High Speeds, Making Them Ideal For Cutting Without Coolant ("Dry Machining").
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (dry machining)
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #12
Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiAlN Coated, 4 Flute, 30 Degrees Helix, 0.030" Radius Corner End, 1" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1)
Asin: B00E4DFA7W | Model: B01762 | PartNumber: B01762 | Ean: 0662355323229 | UPC: 662355323229
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Aluminum Nitride Coatings Become Self-Lubricating When Used At Very High Speeds, Making Them Ideal For Cutting Without Coolant ("Dry Machining").
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (dry machining)
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #13
Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiAlN Coated, 4 Flute, 30 Degrees Helix, Radius Corner End, 0.75" Cutting Length, 5/8" Cutting Diameter, 3" Length (Pack of 1)
Asin: B00E4AWDGQ | Model: B81591 | PartNumber: B81591 | Ean: 0662355349212 | UPC: 662355349212
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Aluminum Nitride Coatings Become Self-Lubricating When Used At Very High Speeds, Making Them Ideal For Cutting Without Coolant ("Dry Machining").
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (dry machining)
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #14
Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiAlN Coated, 4 Flute, 30 Degrees Helix, Radius Corner End, 0.625" Cutting Length, 1/2" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E4AWANC | Model: B81590 | PartNumber: B81590 | Ean: 0662355349205 | UPC: 662355349205
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Aluminum Nitride Coatings Become Self-Lubricating When Used At Very High Speeds, Making Them Ideal For Cutting Without Coolant ("Dry Machining").
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (dry machining)
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Weight: 0.00 pounds
See On Amazon #15
Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiAlN Coated, 4 Flute, 30 Degrees Helix, Radius Corner End, 0.625" Cutting Length, 3/8" Cutting Diameter, 2" Length (Pack of 1)
Asin: B00E4AW8E8 | Model: B81588 | PartNumber: B81588 | Ean: 0662355349199 | UPC: 662355349199
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Aluminum Nitride Coatings Become Self-Lubricating When Used At Very High Speeds, Making Them Ideal For Cutting Without Coolant ("Dry Machining").
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (dry machining)
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Weight: 0.00 pounds
See On Amazon #16
Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiAlN Coated, 4 Flute, 30 Degrees Helix, Radius Corner End, 0.5" Cutting Length, 5/16" Cutting Diameter, 2" Length (Pack of 1)
Asin: B00E4AW51E | Model: B81587 | PartNumber: B81587 | Ean: 0662355349182 | UPC: 662355349182
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Aluminum Nitride Coatings Become Self-Lubricating When Used At Very High Speeds, Making Them Ideal For Cutting Without Coolant ("Dry Machining").
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (dry machining)
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Weight: 0.00 pounds
See On Amazon #17
Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiAlN Coated, 4 Flute, 30 Degrees Helix, Radius Corner End, 0.625" Cutting Length, 7/16" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E4APPFM | Model: B69663 | PartNumber: B69663 | Ean: 0662355357842 | UPC: 662355357842
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Aluminum Nitride Coatings Become Self-Lubricating When Used At Very High Speeds, Making Them Ideal For Cutting Without Coolant ("Dry Machining").
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (dry machining)
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #18
Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiAlN Coated, 4 Flute, 30 Degrees Helix, Radius Corner End, 0.5" Cutting Length, 1/4" Cutting Diameter, 2" Length (Pack of 1)
Asin: B00E4APNKY | Model: B69657 | PartNumber: B69657 | Ean: 0662355357835 | UPC: 662355357835
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Aluminum Nitride Coatings Become Self-Lubricating When Used At Very High Speeds, Making Them Ideal For Cutting Without Coolant ("Dry Machining").
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (dry machining)
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #19
Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiAlN Coated, 4 Flute, 30 Degrees Helix, Radius Corner End, 0.313" Cutting Length, 3/16" Cutting Diameter, 2" Length (Pack of 1)
Asin: B00E4APL5G | Model: B69652 | PartNumber: B69652 | Ean: 0662355357828 | UPC: 662355357828
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Aluminum Nitride Coatings Become Self-Lubricating When Used At Very High Speeds, Making Them Ideal For Cutting Without Coolant ("Dry Machining").
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (dry machining)
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon
Looking For Something Else?
Search