NSi Industries TES-111 Twin Probe Voltage Tester, 80-250 VAC,Neon
Asin: B008FM91VO | Model: TES-111 | PartNumber: TES-111 | Ean: 0662381406552, 0749354000600 | UPC: 662381406552, 749354000600
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Pocket Clip.
Country Of Origin: United States.
Double Insulated Housing And Test Leads.
Features
- Neon Light Indicates Presence Of Ac Voltage From 80-250 Vic
- Double Insulated Housing and Test Leads
- Pocket Clip
- Country of origin: United States
- See more on Amazon...
Brand: NSI | Manufacturer: NSi Industries
Dimensions: 2.50 x 7.50 x 2.50 inches
See On Amazon Similar To NSi Industries TES111 Twin Probe
#1
NSi Industries TES-2 Voltage Tester, 120 or 240 VAC, Neon
Asin: B013V7APNK | Model: TES-2 | PartNumber: TES-2 | Ean: 0662381406590 | UPC: 662381406590
Pocket Clip.
Country Of Origin: United States.
Double Insulated Housing And Test Leads.
Features
- Dual Neon Light Indicates Presence Of Ac Voltage Of Either 120 Or 240 Vic
- Double Insulated Housing and Test Leads
- Pocket Clip
- Country of origin: United States
- See more on Amazon...
Brand: NSI | Manufacturer: NSi Industries
See On Amazon #2
allsun Automotive Electrical Circuit Tester Probe 2-24V DC Pen Vehicle Power Diagnostic Tool Short Finder Auto Wire Test Light Device System Analyzer
Asin: B079ZRQRJR | Model: EM287 | PartNumber: EM287 | Ean: 0788537552338 | UPC: 788537552338
【Overload Protection】Car Electrical Diagnostic Tool Overload Protection: When The Current Exceeds 8A, The Unit Will Disconnect The Current Automatically..
【Insuffinient Light Environment】Automotive Wire Tracer Takes The Insufficient Light Environment In Consider, The Tool Built In Flashlight To Indicate The Dc Voltage Measurement..
【Easy To Use】Automotive Electrical Test Equipment, It's Easy To Use. Battery By The Vehicle Battery Directly. The Illumination Function Enables Automotive Technician To Test The Electrical System In The Darkness..
【Has Long Test Lead】Electrical System Analyzer Has Long Test Lead. The Cable Length Is About 5M(16Ft) Which Allows You Test Any Electrical System Easily..
Features
- CIRCUIT TESTER WIDELY APPLICATION Automotive Circuit Test Probe EM287 can be used to test continuity, test polarity of a voltage, check lamp, check electric motor, follow and locate short circuits, test for bad ground contacts and measure dc voltage from 2V to 24V etc.
- HAS LONG TEST LEAD Electrical System Analyzer has long test lead. The cable length is about 5m(16ft) which allows you test any electrical system easily.
- OVERLOAD PROTECTION Car Electrical Diagnostic Tool Overload Protection: When the current exceeds 8A, the unit will disconnect the current automatically.
- EASY TO USE Automotive Electrical Test Equipment, it's easy to use. Battery by the vehicle battery directly. The illumination function enables automotive technician to test the electrical system in the darkness.
- INSUFFINIENT LIGHT ENVIRONMENT Automotive Wire Tracer takes the insufficient light environment in consider, the tool built in flashlight to indicate the DC voltage measurement.
- See more on Amazon...
Brand: allsun | Manufacturer: Zhangzhou Haimao Dianzi Keji Co., LTD
Dimensions: 1.65 x 10.79 x 2.09 Inches
See On Amazon #3
TopDiag P200 Power Circuit Probe Kit - Automotive Circuit Tester with 2024 Online Update, 9~30V Voltage Range, Multimeter, Relay Test, Fuel Injector Tester, Activating Component, Oscilloscope Mode
Asin: B0912YBNQP | Model: P200 | PartNumber: P200 | Ean: 0791734860403 | UPC: 791734860403
💪【Activating Electrical Components】Being Able To Ap-Ply Battery Power Or Ground Right To The Probe Tip Gives You The Ability To Activate And Dynamically Test Electrical Components Such As Lights, Motors And Solenoids..
💪【Widely Application】The Topdiag P200 Is Essential For A Range Of Automotive Diagnostic Scenarios, Whether You're A Professional Mechanic Troubleshooting Complex Vehicle Issues Or A Diy Enthusiast Performing Routine Maintenance Tasks. With Its Versatile Capabilities, It's Perfect For Diagnosing Electrical Problems, Testing Relays, Analyzing Fuel Injectors, Activating Components, And Even Utilizing Oscilloscope Mode For Advanced Troubleshooting. It's A Must-Have Tool For Anyone Working On Automotive Electrical Systems.
💪【18 Languages & Firmware Upgrade】You Can Choose From 18 Languages.You Can Easily Use A Usb Data Cable To Connect Circuit Tester Automotive To A Computer To Perform An Online Upgrade Program..
💪【Clean The Fuel Injector】It Is Extremely Important To Regularly Test The Fuel Injector. P200 Provides 4 Types Of Pulse Signals (Once Or Multiple Times) Combined With Car Cleaner To Achieve Maximum Cleaning Effect..
💪【Relay Test】There’S Nothing Worse Getting Stuck On The Trail At Night Because Your Light Relay Burnt Out, Losing Your Radio In The Middle Of A Road Trip, Or Not Being Able To Finish Your Project Because You’Re Short One Small Relay. With Our P200 Relay Test, Fix Your Lights On The Fly, And Keep The Road Trip Rocking All Night Long..
💪【Smart Test & Positive & Negative Test】When Connected To The Probe Of Car Electrical Test Tool To Measure Voltage, Resistance, Positive/Negative Polarity, It Will Automatically Become An Instant Auto-Range, Intelligent Judgment Does Not Require Manual Selection, And The Corresponding Parameter Values And Prompts Are Displayed On The Hd Lcd Screen. With A 20Ft Cable, You Can Quickly Assist You In Diagnosing The Car's Condition Without Opening The Wiring..
💪【1-Year Warranty, Perfect Service】 Topdiag Car Circuit Tester Provides 1-Year Warranty, And Supports 30 Days No Reason To Return..
💪【Multimeter & Oscilloscope Tester】The P200 Circuit Tester Will Be The More Versatile And Powerful Power Circuit Probe Kit You've Ever Seen. Contains The Multimeter's Dc Voltage (Vdc), Resistance (Ohm), Diode/On-Off Test (Dio), Current (Amp) And Frequency Test Functions, Combined With The Unique Oscilloscope Function And Buzzer, Can Test Components According To Voltage, Resistance Value, Frequency Duty Cycle, And Waveform Diagrams To Quickly Diagnose Problems With Your Circuit System..
Features
- 15+ Diagnostic Car Services for Automotive System Multiple functions - almost covering the probe tools on the market. With Multimeter function, Oscilloscope mode, Continuity testing, Relay test, Activating components in your hand, Power supply/ground detecting/open & short testing, Trailer lights testing, Signal circuit testing, Checking for Bad Ground Contacts, Clean the Injectors, 20FT extension cable & LED light, AC/DC voltage/resistance/diode/frequency testing.
- Multimeter & Oscilloscope Tester The P200 Circuit tester will be the more versatile and powerful Power Circuit Probe Kit you've ever seen. Contains the multimeter's DC voltage (VDC), resistance (OHM), diode/on-off test (DIO), current (AMP) and frequency test functions, combined with the unique oscilloscope function and buzzer, can test components according to voltage, resistance value, frequency duty cycle, and waveform diagrams to quickly diagnose problems with your circuit system.
- Activating Electrical Components Being able to ap-ply battery power or ground right to the probe tip gives you the ability to activate and dynamically test electrical components such as lights, motors and solenoids.
- Smart Test & Positive & Negative Test When connected to the probe of Car Electrical Test Tool to measure voltage, resistance, positive/negative polarity, it will automatically become an instant auto-range, intelligent judgment does not require manual selection, and the corresponding parameter values and prompts are displayed on the HD LCD screen. With a 20ft cable, you can quickly assist you in diagnosing the car's condition without opening the wiring.
- Clean the fuel injector It is extremely important to regularly test the fuel injector. P200 provides 4 types of pulse signals (once or multiple times) combined with car cleaner to achieve maximum cleaning effect.
- Relay Test There s nothing worse getting stuck on the trail at night because your light relay burnt out, losing your radio in the middle of a road trip, or not being able to finish your project because you re short one small relay. With our P200 relay test, fix your lights on the fly, and keep the road trip rocking all night long.
- Widely Application The Topdiag P200 is essential for a range of automotive diagnostic scenarios, whether you're a professional mechanic troubleshooting complex vehicle issues or a DIY enthusiast performing routine maintenance tasks. With its versatile capabilities, it's perfect for diagnosing electrical problems, testing relays, analyzing fuel injectors, activating components, and even utilizing oscilloscope mode for advanced troubleshooting. It's a must-have tool for anyone working on automotive electrical systems
- 18 Languages & Firmware Upgrade You can choose from 18 languages.You can easily use a USB data cable to connect Circuit tester automotive to a computer to perform an online upgrade program.
- 1-YEAR WARRANTY, PERFECT SERVICE Topdiag Car circuit tester provides 1-year warranty, and supports 30 days no reason to return.
- See more on Amazon...
Brand: TopDiag | Manufacturer: TopDiag
Dimensions: 4.21 x 15.16 x 11.50 Inches | Weight: 2.65 Pounds
See On Amazon #4
ANCEL PB100 Automotive Power Circuit Probe Tester, 12V 24V Car Test Light Electrical Diagnostic Tool Master Kit AC DC Digital Voltage Short Finder, Relay Fuse Tester Trailer 3 System Thermometer 4
Asin: B078GPS6KV | Model: 13 | PartNumber: 13 | Ean: 0608410128071 | UPC: 608410128071
【Easy To Use】Ancel Provides How-To Guides And Video Tutorials To Help You Easily Complete Your Repair Work. With The Press Of A Switch, You'll Have An Instant Hot Lead Or Ground Lead. Use The Probe Tip And Ground Lead Simultaneously To Power Up Components Right In Your Hand. Instantly Check Components For Continuity As Well As Identify Positive, Negative And Open Circuits. Locate Shorts Without Wasting Fuses. 👉Tip: The Probe Is On The Back Of The Device..
【Accessory Replacement & 1 Year Warranty】If You Lose The Parts Of Your Pb100, You Can Contact Ancel Customer Service For A Replacement. We Provides 1 Year Warranty, 60 Days No-Reason-Asked Return For Refund. And There Is A Technical Support For Timely And Effectively Solving The Quality Problem Within 24 Hours..
【Circuit Protection】The Pb100 Has A Built-In 8-Amp Circuit Breaker To Prevent Circuit Overload And Overheating. Unlike A Normal Test Lamp, This Device Can Conduct Direct Battery Current Into The Circuit You Touch With It. Any Time You Backfeed A Circuit, You Need To Know What You Are Doing. The Breaker Will Protect The Circuit, But 8 Amps Is Still Enough To Do A Lot Of Damage With The Wrong Wire..
【Trailer Wiring】A Recurring Source Of Frustration For Technicians Across The Country, Especially Those Who Service Trailers Exposed To Road Salt Or Salt Water. The Pb100 Circuit Tester Features A Long 20-Foot Cable That Allows You To Make The Initial Connection Directly To The Vehicle's Battery, While Providing Easy Access To Connect The Trailer Harness At The Rear Of The Vehicle..
【Voltage Indicator】The Led Indicator On The Front Of The Unit Will Show You The Battery Voltage When It Is Connected. You Can Use It To Determine A Whole Range Of Things. You Can Even Do A Quick Check Of The Alternator By Plugging It In And Starting The Car. The Voltage Should Go From About 12.6 Volts To 14.0 Volts. This Is Also Useful If You Have A Situation Where A Power Supply Has A Large Voltage Drop, If You Notice Low Voltage On Certain Branches When Checking Fuses, Etc..
【What Does It Do?】The Pb100 Is An Essential Tool For Automobile User. It Is Needed For Testing Components On And Off The Vehicle, Checking For The Good And Bad Grounds, Testing For Continuity And Diagnosing Circuit Failures. For Example, You Can Use It To Turn On A Blower Motor. You Can Run Power Window Motors, Windshield Wipers, And Even Rear Window Defrosters. If The Vehicle Owner Keeps It In His Car He Can Check System Failure On His Own Way No Need To Go To Technician..
Features
- What is a PB100 Probe Tester? With the PB100 probe tester, you can check voltage and ground signals in a typical DC circuit. However, the kicker is that you can also use it to send voltage and ground signals. It works like a test light that can power circuits or provide a good known ground. This way, you can effectively test components and circuits without having to break out the old alligator clips and jumper wires. You can power or ground a circuit directly through the top of the device.
- What does it do? The PB100 is an essential tool for automobile user. It is needed for testing components on and off the vehicle, checking for the good and bad grounds, testing for continuity and diagnosing circuit failures. For example, you can use it to turn on a blower motor. You can run power window motors, windshield wipers, and even rear window defrosters. If the vehicle owner keeps it in his car he can check system failure on his own way no need to go to technician.
- Easy to Use ANCEL provides how-to guides and video tutorials to help you easily complete your repair work. With the press of a switch, you'll have an instant hot lead or ground lead. Use the probe tip and ground lead simultaneously to power up components right in your hand. Instantly check components for continuity as well as identify positive, negative and open circuits. Locate shorts without wasting fuses. TIP: The probe is on the back of the device.
- Voltage Indicator The LED indicator on the front of the unit will show you the battery voltage when it is connected. You can use it to determine a whole range of things. You can even do a quick check of the alternator by plugging it in and starting the car. The voltage should go from about 12.6 volts to 14.0 volts. This is also useful if you have a situation where a power supply has a large voltage drop, if you notice low voltage on certain branches when checking fuses, etc.
- Circuit Protection The PB100 has a built-in 8-amp circuit breaker to prevent circuit overload and overheating. Unlike a normal test lamp, this device can conduct direct battery current into the circuit you touch with it. Any time you backfeed a circuit, you need to know what you are doing. The breaker will protect the circuit, but 8 amps is still enough to do a lot of damage with the wrong wire.
- Trailer Wiring A recurring source of frustration for technicians across the country, especially those who service trailers exposed to road salt or salt water. The PB100 Circuit Tester features a long 20-foot cable that allows you to make the initial connection directly to the vehicle's battery, while providing easy access to connect the trailer harness at the rear of the vehicle.
- Accessory Replacement & 1 Year Warranty If you lose the parts of your PB100, you can contact ANCEL customer service for a replacement. We provides 1 Year warranty, 60 Days No-Reason-asked Return for refund. And there is a technical support for timely and effectively solving the quality problem within 24 Hours.
- See more on Amazon...
Brand: ANCEL | Manufacturer: ANCEL
Dimensions: 2.90 x 10.20 x 8.70 Inches
See On Amazon #5
19 Pieces Wire Piercing Probe Insulation Back Probes, Probe Non-destructive Pin, Back Probe Kit Automotive for Test Car, 2 Styles
Asin: B08HK3TQB7 | Model: Frienda-Piercing Probes-01 | PartNumber: Frienda-Piercing Probes-01
Apply To: Wire Piercing Probe Is A Maintenance Tool For Automotive Diagnostic Testing, It Works With Most Test Kits In The Field, With Standard 4 Mm Banana Plug Test , Test Probes 21 Mm In Length.
Package Includes: You Will Receive 4 Pieces Insulation Wire Piercing Probes In Red, Green, Black And Yellow Color, 15 Pieces Of 0.7 Mm Thick Test Probe Pins In Blue, Red, Black, Green And Yellow Color; 19 Pieces Wire Piercing Probes In Total, Sufficient Quantity For Your Daily Use.
Features: As A Test Probe, It Can Pierce The Insulation Layer Of The Wire, So As To Make Electrical Measurements Of The Car Without Damaging The Wire, So That You Can Clearly Understand The State Of The Car.
Widely Compatible: This Wire Piercing Probe Is Made Of Quality Stainless Steel And Nylon, Test Probe Applications Include Automotive, Industrial, Hvac, Electrical, Marine, Etc..
Features
- Easy to carry: these wire probes are very lightweight and flexible, you can store it in your tools bag, 19 back probes, enough for your daily use, don t worry about losing
- Widely compatible: this wire piercing probe is made of quality stainless steel and nylon, test probe applications include automotive, industrial, HVAC, electrical, marine, etc.
- Apply to: wire piercing probe is a maintenance tool for automotive diagnostic testing, it works with most test kits in the field, with standard 4 mm banana plug test , test probes 21 mm in length
- Features: as a test probe, it can pierce the insulation layer of the wire, so as to make electrical measurements of the car without damaging the wire, so that you can clearly understand the state of the car
- Package includes: you will receive 4 pieces insulation wire piercing probes in red, green, black and yellow color, 15 pieces of 0.7 mm thick test probe pins in blue, red, black, green and yellow color; 19 pieces wire piercing probes in total, sufficient quantity for your daily use
- See more on Amazon...
Brand: Frienda | Manufacturer: Frienda
Weight: 0.02 pounds
See On Amazon #6
Power Probe Professional Electrical Test Kit - Red (PPROKIT01) Inc III w/PPDMM
Asin: B012USP6QW | Model: PPROKIT01 | PartNumber: PPROKIT01 | Ean: 0878253002412, 0878253002375, 0785422734107 | UPC: 878253002375, 878253002412, 785422734107
Measures Resistance To 60M Ohms.
Measures Current From .001Amps To 10 Amps.
Cat-Iv 600V Hybrid Safe Ac/Dc Voltmeter.
Features
- Supplies Power and Ground for Functional Component Testing
- CAT-IV 600V Hybrid Safe AC/DC Voltmeter
- Measures Resistance to 60M Ohms
- Measures Current from .001Amps to 10 Amps
- See more on Amazon...
First Available: 08/24/2015
Brand: Power Probe | Manufacturer: Power Probe
Dimensions: 3.00 x 12.00 x 14.00 Inches | Weight: 2.20 Pounds
Warranty: 1 Year Manufacturers Limited Warranty (Free from defects and workmanship)
See On Amazon #7
ALLOSUN GK5225 Automotive Wire Piercing DC Voltage Circuit 6V / 12V Hook Probe Tester 59 Inch Cord with LED & Buzzer Indicator, White
Asin: B07WG7912B | Model: GK5225 | PartNumber: GK5225 | Ean: 0788537553014 | UPC: 788537553014
Safe Commitment: The Hook Cover Design Prevents You From Stabbing Your Own Finger When Placing The Tester In A Wire; Cord Is Insulated For Heat And Oil Resistance And Safe Use; Constructed With A Slim Stainless-Steel Probe For Piercing And Locking Onto The Wire, Even In Hard To Reach Areas..
Easy To Read: Includes Two High Visibility Led Bulb & Loud Buzzer For Easy Identification..
Hands-Free Operation: Tester Has An End Hook To Hold The Wire To Free Up Your Hands To Decrease Down Time And Increase Productivity; Can Be Used As A Probe On Its Own By Removing The Plastic Sleeve That Hooks The Cable Or As A Probe And Hook That Pierces The Wire..
Widely Applications: Use In The Shop To Check Wires When Installing Radios And Brake Controllers, On Your Camper To Test Which Wires Operate The Tail Lights, Or Any Trailer Wiring Application. (Not Recommended To Use On Sensor Or Computer Wiring. ).
Features
- QUICKLY TEST WIRING: Identify wiring issues such as short circuits, fuses, test connections, wiring harnesses, and more. (Note: Only test on DC 6-12V circuits and DO NOT test with voltage above 15V. ) Three Interchangeable probes allow the tool to be used as a touch-type or pierce-type tester.
- Widely Applications: Use in the shop to check wires when installing radios and brake controllers, on your camper to test which wires operate the tail lights, or any trailer wiring application. (Not recommended to use on sensor or computer wiring. )
- SAFE Commitment: The hook cover design prevents you from stabbing your own finger when placing the tester in a wire; Cord is insulated for heat and oil resistance and safe use; Constructed with a slim stainless-steel probe for piercing and locking onto the wire, even in hard to reach areas.
- HANDS-FREE OPERATION: Tester has an end hook to hold the wire to free up your hands to decrease down time and increase productivity; Can be used as a probe on its own by removing the plastic sleeve that hooks the cable or as a probe and hook that pierces the wire.
- EASY TO READ: Includes two high visibility LED bulb & loud buzzer for easy identification.
- See more on Amazon...
Brand: ALLOSUN | Manufacturer: Zhangzhou Eastern Intelligent Meter Co., Ltd
Dimensions: 1.50 x 11.00 x 1.50 Inches
Warranty: After-sale Service Warranty within 1 year, in the precondition of non-artificial damage.
See On Amazon #8
Southwire KIT; T200K MULITPURPOSE TONE & PROBE
Asin: B019QXOCDW | Model: T200K | PartNumber: T200K | Ean: 0032886935398 | UPC: 032886935398
Double Molded Tester Housing For Durability And Grip.
Provides Audible And Visual Indication.
Traces Non-Energized: Low Voltage Cables.
Five Adapter Cables: Store In Case And Plug Into Rj11 Jack On Trasnmitter.
Features
- RUGGED carrying case with belt-mount
- FIVE ADAPTER CABLES: store in case and plug into RJ11 jack on trasnmitter
- DOUBLE MOLDED tester housing for durability and grip
- TRACES NON-ENERGIZED: low voltage cables
- PROVIDES AUDIBLE and visual indication
- See more on Amazon...
First Available: 03/12/2017
Brand: Southwire | Manufacturer: Southwire
Dimensions: 1.00 x 1.00 x 1.00 Inches | Weight: 0.72 Pounds
Warranty: 1 year manufacturer
See On Amazon #9
ZIBOO ZB07 Insulation Wire Piercing Probes,Automotive Diagnostic Test Accessories Repair Tools Needle,Back Probe kit,3.25 x 0.25 x 0.25 Mini Back Probe,Wire Piercer
Asin: B01MDRQZ5L | Model: ZIBOO ZB07 | PartNumber: ZIBOO ZB07 | Ean: 0714973882081 | UPC: 714973882081
►Works With Most Test Lead Kits In The Field - With Standard 4Mm Banana Plug Test Lead,Test Probes 21 Mm Length.
► Warranty:All Test Leads Complies With Iec/En: 61010 Standards. 1 Year Warranty Provided By Ziboo.
►Set Includes Four Probes - Red, Black, Green, Yellow.
►Also Very Handy For Piercing And Tapping Readings On Smaller Gauge Wires - Using The Included Probe Adapters.
Features
- Great for back probing weather pack style connectors used with numerous automotive sensors
- Also very handy for piercing and tapping readings on smaller gauge wires - using the included probe adapters
- Works with most Test Lead Kits in the field - with standard 4mm banana plug test lead Test probes 21 mm length
- Set includes four probes - red, black, green, yellow
- WARRANTY:All test leads complies with IEC/EN: 61010 standards. 1 Year Warranty provided by ZIBOO
- See more on Amazon...
Brand: ZIBOO | Manufacturer: ZIBOO
Weight: 0.02 Pounds
See On Amazon #10
TestHelper TP161RDx5 Insulation Piercing Needle Non-destructive Pin Test Probes,4mm Banana Socket for Car Tester Red/Black
Asin: B07467GS3C | Model: TP161RDx5 | PartNumber: TP161RDx5 | Ean: 0889284091078 | UPC: 889284091078
Brand: TestHelper | Manufacturer: TestHelper
See On Amazon #11
Southwire KIT, T100PK Contractor Tone Probe
Asin: B01EUWSQKE | Model: T100PK | PartNumber: T100PK | Ean: 0032886935367 | UPC: 032886935367
Toner Features On-Board Test Lead Storage.
Probe Features Replaceable Tip; Led Flashlight; Led Signal Strength Indicator; Rearward Facing Speaker And Stereo Headphone Jack.
Positive Cable Detection: Tone Changes When Wires Are Shorted.
Features
- Quickly trace non-energized cables - even behind walls
- Positive cable detection: tone changes when wires are shorted
- Toner features on-board test lead storage
- Probe features replaceable tip; LED flashlight; LED signal strength indicator; rearward facing speaker and stereo headphone jack
- See more on Amazon...
Brand: Southwire | Manufacturer: Southwire
Dimensions: 1.00 x 1.00 x 1.00 Inches | Weight: 0.82 Pounds
Warranty: 1 year manufacturer
See On Amazon #12
Goupchn High Voltage Oscilloscope Probe P4250 100:1 2KV 250MHz Alligator Crocodile Clip BNC Test Lead with Accessory Kit
Asin: B086V9B67C | Model: P4250 | PartNumber: P4250 | Ean: 0782913046039 | UPC: 782913046039
The Tip Of The Removable Hook Is Protected By A Plastic Case. The Positioning Sleeve Ensures The Stability And Reliability Of The Tip Exposed At The Test Point. 4 Colors Identification Rings Compatible With Most Oscilloscope Probe Sizes For Easy Channel Differentiation..
Package Includes: 1 X Probe, 8 X Marker Rings, 1 X Ground Lead, 2 X Locating Sleeves, 1 X Adjustment Tool, 1 X Ground Spring, 1 X Probe Hook, 1 X Adapter, 1 X User Manual..
High Voltage Oscilloscope Probe Is Compatible With The Bnc Interface, Digital Oscilloscopes, Virtual Oscilloscopes, Handheld Oscilloscopes And More..
High Voltage Probe Is 250Mhz Probe And Can Withstand 2000V. The Grounding Crocodile Clip Reliably Grounds The Probe Stage For Safe Operation And Correct Signal Reading..
Features
- Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use.
- High voltage probe is 250mhz probe and can withstand 2000V. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading.
- The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation.
- High voltage oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more.
- Package includes: 1 x Probe, 8 x Marker rings, 1 x ground lead, 2 x locating sleeves, 1 x adjustment tool, 1 x ground spring, 1 x probe hook, 1 x adapter, 1 x user manual.
- See more on Amazon...
Brand: Goupchn | Manufacturer: Goupchn
See On Amazon #13
Amprobe NCV-1040 Non-Contact Voltage Probe with Flashlight and Magnetic Solenoid Testing, Black
Asin: B07C7LTGCR | Model: NCV-1040 | PartNumber: NCV-1040 | Ean: 0095969856300 | UPC: 095969856300
Cat Iv 1000 V Safety Rated And Ip65 Water And Dust Resistant For Industrial Applications.
Performs In Indoor And Outdoor Settings.
Audible Buzzer And Visual Led Voltage Indication, Built-In Work Light, Magnetic Detection, And Auto-Off Feature.
Features
- Detects voltage from 12 to 50V and 50 to 1000 v ac safely and quickly without interrupting electrical systems
- Audible buzzer and visual led voltage indication, built-in work light, magnetic detection, and auto-off feature
- Cat iv 1000 v safety rated and Ip65 water and dust resistant for industrial applications
- Performs in indoor and outdoor settings
- See more on Amazon...
First Available: 04/16/2018
Brand: Amprobe | Manufacturer: Amprobe (Fluke Electronics Corp)
Dimensions: 1.90 x 9.90 x 4.20 Inches | Weight: 0.13 Pounds
See On Amazon #14
Micsig DP20003 High Voltage Differential Probe 5600V 100MHz 3.5ns Rise Time 200X/2000X Attenuation Rate
Asin: B07DKT61LD | Ean: 4897093810076
Application: Designed For The Measurement Of High Voltage Differential Signal, To Meet The Demand For Floating Measurement..
Warranty: Sainsmart Is A Trusted Vendor, We Offer A 1-Year Manufacturer’S Warranty On All Parts. Please Buy With Confidence, And Feel Free To Contact Us If You Have Any Problem..
Precise Signal: With Stable Physical Properties And High Quality Plug-In Cards, You Will Get A Accurate Signal. But Please Note That A Calibration Is Needed When A Substantial Change In Temperature Or Other Circumstances Affect The Accuracy Of The Probe's Zero Point. You Can Short The Input Terminals Of The Probe, Then Power The Probe While Simultaneously Pressing The 200X And 2000X Keys For 3 Seconds..
Portable: With Portable And Simple Design, You Can Take The Dp20003 To Work Anywhere With The Small Package Box. Power Supply Usb Dc 5V Output, More Portable While Oscilloscope Has Usb Interface..
Features
- UPGRADED VERSION OF DP10013: Micsig DP20003 is the latest upgraded version of DP10013. With powerful maximum differential test voltage( DC + Peak AC) up to 5600V, it will be a great helper for your measuring project.
- PORTABLE: With portable and simple design, you can take the DP20003 to work anywhere with the small package box. Power supply USB DC 5V output, more portable while oscilloscope has USB interface.
- APPLICATION: Designed for the measurement of high voltage differential signal, to meet the demand for floating measurement.
- PRECISE SIGNAL: With stable physical properties and high quality plug-in cards, you will get a accurate signal. But please note that a calibration is needed when a substantial change in temperature or other circumstances affect the accuracy of the probe's zero point. You can short the input terminals of the probe, then power the probe while simultaneously pressing the 200X and 2000X keys for 3 seconds.
- WARRANTY: SainSmart is a trusted vendor, we offer a 1-year manufacturer s warranty on all parts. Please buy with confidence, and feel free to contact us if you have any problem.
- See more on Amazon...
Brand: Micsig | Manufacturer: Micsig
Weight: 0.00 Pounds
See On Amazon #15
Goupchn Test Probe Set 4PCS 600V/10A Non-Destructive Back Probes and 4PCS Gold-Plated Precision Sharp Probes for 2mm Multimeter Leads Electrical Testing
Asin: B09BFBQFJP | Model: P30038-4PCS+P1505B.1-4PCS | PartNumber: P30038-4PCS+P1505B.1-4PCS
Plug And Play. Easy To Use. The Ends Of Both Probes Are 2Mm. Just Plug The Test Probes On The 2Mm Nickel-Plated Needles And Then It Can Be Used Directly..
Warranty: Hope You Can Be Satisfied With Our Test Probes. We Provide Guarantee Of A 30-Day Replacement Or Refund For Any Problem And 1 Year Warranty. If You Have Any Question, Feel Free To Contact Us..
Package Include: 4Pcs Test Probes + 4Pcs Gold-Plated Sharp Probes. The Combination Of Two Kinds Of Probes Can Meet Your More Detailed Measurement Needs..
Gold-Plated Precision Sharp Test Probes Can Be Used To Test Small Components Such As Circuit Boards And Mobile Phone Cameras. It Can Also Be Used To Puncture Wires Without Damage..
Features
- Multimeter test probes are made of high quality copper nickel plated which can ensure excellent sensitivity, accuracy and stable performance. CAT II: 600V/10A.
- Gold-plated precision sharp test probes can be used to test small components such as circuit boards and mobile phone cameras. It can also be used to puncture wires without damage.
- Plug and play. Easy to use. The ends of both probes are 2mm. Just plug the test probes on the 2mm nickel-plated needles and then it can be used directly.
- Package include: 4PCS test probes + 4PCS gold-plated sharp probes. The combination of two kinds of probes can meet your more detailed measurement needs.
- Warranty: Hope you can be satisfied with our test probes. We provide guarantee of a 30-day replacement or refund for any problem and 1 year warranty. If you have any question, feel free to contact us.
- See more on Amazon...
Brand: Goupchn | Manufacturer: Goupchn
See On Amazon #16
Goupchn Insulation Wire Piercing Probes 2PCS Heavy Duty Fully Insulated Quick Piercing Multimeter Test Probes with 4mm Banana Socket for Automotive Diagnostic
Asin: B092VS3MQD | Model: P5005 | PartNumber: P5005
With 4Mm Standard Banana Female Socket, You Can Connect Most Test Leads And Diagnostic Devices. Suitable For Using With Multimeters For Auto Repairing, Back-Probing Harness Connectors And Automotive Sensors..
Warranty: Hope You Can Be Satisfied With Our Piercing Probes. We Provide Guarantee Of A 30-Day Replacement Or Refund For Any Problem And 1 Year Warranty. If You Have Any Question, Feel Free To Contact Us..
Package Include: 2Pcs Wire-Piercing Puncture Probes. Rating: Catiii 1000V/Max.10A. Wire Largest Diameter 3.5Mm(16Awg-23Awg). Suitable For Cables With Diameter Less Than 3.5Mm..
The Stainless Steel Probe Can Easily Pierce The Wire Without Stripping And Will Not Damage The Cable. Just Pass The Wire Through The Probe And Then Release It..
Features
- Wire piercing probes are made of high quality copper nickel plated and insulated flame-retardant shell. High reliability and long service life.
- The stainless steel probe can easily pierce the wire without stripping and will not damage the cable. Just pass the wire through the probe and then release it.
- With 4mm standard banana female socket, you can connect most test leads and diagnostic devices. Suitable for using with multimeters for auto repairing, back-probing harness connectors and automotive sensors.
- Package include: 2PCS wire-piercing puncture probes. Rating: CATIII 1000V/Max.10A. Wire largest diameter 3.5mm(16AWG-23AWG). Suitable for cables with diameter less than 3.5mm.
- Warranty: Hope you can be satisfied with our piercing probes. We provide guarantee of a 30-day replacement or refund for any problem and 1 year warranty. If you have any question, feel free to contact us.
- See more on Amazon...
Brand: Goupchn | Manufacturer: Goupchn
Weight: 0.11 Pounds
See On Amazon #17
Gardner Bender GET-3100 Twin Probe Circuit Tester
Asin: B00176K8HQ | Model: GET-3100 | PartNumber: GET-3100 | Ean: 0032076068417 | UPC: 032076068417
Pocket Clip For Added Convenience.
Simple Tool For Testing Voltages Greater Than 80V Ac/Dc.
Equipped With 2 In. Test Leads.
Durable Abs Plastic Construction - Insulated Housing And Test Leads.
Features
- Bright 360 visual indicator brightens as voltage increases
- Durable ABS plastic construction - insulated housing and test leads
- Pocket clip for added convenience
- Equipped with 2 in. test leads
- Simple tool for testing voltages greater than 80V AC/DC
- See more on Amazon...
Brand: GB Electrical | Manufacturer: Gardner Bender
Dimensions: 5.75 x 3.75 x 2.75 Inches | Weight: 0.05 Pounds
Warranty: Warranty
See On Amazon #18
Amprobe PY-1A Voltage Tester
Asin: B003NY45QK | Model: PY-1A | PartNumber: PY-1A | Ean: 0095969516204 | UPC: 095969516204
Bright Neon Lights Indicates Ac And Dc Voltages Even In Well-Lit Rooms.
Ce And Csa Certified For Category Iii 600V..
Built-In Test Leads Holder; Spaced To Fit A Standard Us/Canada Outlet For Easy One-Handed Testing.
Compact, Pocket-Sized And Easy To Use. High Quality Construction For Years Of Service..
Features
- Automatic AC/DC voltage tester for residential or commercial use; tests receptacles, lights and appliances
- Compact, pocket-sized and easy to use. High quality construction for years of service.
- Bright neon lights indicates AC and DC voltages even in well-lit rooms
- Built-in test leads holder; spaced to fit a standard US/Canada outlet for easy one-handed testing
- CE and CSA certified for Category III 600V.
- See more on Amazon...
Brand: Amprobe | Manufacturer: Amprobe
Dimensions: 1.30 x 9.80 x 4.00 Inches | Weight: 0.20 Pounds
See On Amazon #19
Goupchn MCX Test Probe Hook Lead with Mini Pocket Oscilloscope Test Probe Clip for Test Equipment DS202 DS203 DS211 DS212 DSO201 DSO112A
Asin: B089CR8LCV | Model: MCX+5003 | PartNumber: MCX+5003
Suitable For All Kinds Of Virtual Oscilloscopes And Multimeters Like Clamp Meters, Digital Multimeters, Table Meters. Makes The Test Lead Meet Different Testing Needs. Widely Used In Pocket Oscilloscopes Of Various Models, Such As The Ds202 Ds203 Ds211 Ds212 Dso201 Dso112a..
Warranty: Hope You Can Be Satisfied With Our Oscilloscope Probes. We Provide Guarantee Of A 30-Day Replacement Or Refund For Any Problem And 1 Year Warranty. If You Have Any Question, Feel Free To Contact Us..
Package Include: 1Pcs Mcx Oscilloscope Test Probe Lead, 2Pcs Ic Test Hooks. Lead Length: 69 Cm/27.2 In. Weight: About 18G. It Is A Very Portable Pocket Test Equipment..
Test Hook Adopts High Quality And Conductive Performance Materials. The Front End Of The Hook Is Retractable With A Spring, So Objects Can Be Firmly Hooked..
Features
- The mcx oscilloscope test probe is wrapped with ABS material, insulated and environmentally friendly. It has strong signal transmission capability with attenuation ratio of 1:1. Precision mcx interface adopts push-in connection, easy and quick to use.
- Test hook adopts high quality and conductive performance materials. The front end of the hook is retractable with a spring, so objects can be firmly hooked.
- Suitable for all kinds of virtual oscilloscopes and multimeters like clamp meters, digital multimeters, table meters. Makes the test lead meet different testing needs. Widely used in pocket oscilloscopes of various models, such as the DS202 DS203 DS211 DS212 DSO201 DSO112A.
- Package include: 1PCS mcx oscilloscope test probe lead, 2PCS ic test hooks. Lead length: 69 cm/27.2 in. Weight: about 18g. It is a very portable pocket test equipment.
- Warranty: Hope you can be satisfied with our oscilloscope probes. We provide guarantee of a 30-day replacement or refund for any problem and 1 year warranty. If you have any question, feel free to contact us.
- See more on Amazon...
Brand: Goupchn | Manufacturer: Goupchn
Weight: 0.04 Pounds
See On Amazon
Looking For Something Else?
Search