San Francisco Bay Brand Shrimpery Brine Shrimp Kit for Hatching Baby Brine Shrimp Eggs | Excellent Food Source Baby Aquarium Fish, Freshwater, Reef & Saltwater Marine Tank Hatchery Kit
Asin: B006OOO7V4 | Model: 66170 | PartNumber: 66170 | Ean: 0781163546788, 0000945661700, 0015568977695 | UPC: 015568977695, 781163546788, 000945661700
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.High Quality - Freshly Hatched Brine Shrimp Are An Excellent Food For Baby Fish, Small Fish And Reef Tanks. San Francisco Bay Brand Has Supplied Brine Shrimp Eggs For The Ornamental Fish Industry For Over Forty Years. Look For Our San Francisco Bay Brand Hatchery Kit & Shrimpery To Hatch Your Own Fish Food Or Use As An Educational Tool..
Feeding Instructions - Into A Container Add 1 Quart (1 Liter) Of Water, Add 1 Teaspoon Of Brine Shrimp Eggs, Plug In Air Pump To Start Aeration, After 1 Hour Of Rehydration Add 2 Tablespoons Of Aquarium (Rock) Salt And Keep Aeration On. Keep Temperatures Between 80-82 Degrees F (26-28 Degrees C), Maintain A Ph Of 8.0 Or Above And Eggs Should Hatch In 24-36 Hours. After Eggs Hatch Turn Off Aeration, Direct A Light Source At The Bottom, Wait 5-10 Minutes For Shells To Float To Top And Baby Shrimp.
Recommended For - Small Or Baby Freshwater Fish: Egg Laying, Live Bearing, Platys, Tetras, Small Saltwater Fish: Gobies, Blennies, Saltwater Invertebrates: Tridacnid Clams, Crabs, Feather Dusters, Shrimps, Sea Apples. Corals: Sps, Lp, Softies..
Features - An Inexpensive And Easy To Maintain System To Hatch Your Own Baby Brine Shrimp Over And Over Again.The Jerky Swimming Motions Of Freshly Hatched Baby Brine Shrimp Are Known To Trigger The Feeding Instinct Of Fish Fry. Freshly Hatched Baby Brine Shrimp Still Contain Their Yolk Sac And As Such Form A Food Rich In Marine Derived Fatty Acids. All Natural, Highly Nutritious, Excellent For Fish And Reefs, Proven To Trigger A Feeding Response In Fry..
Features
- EASY TO USE - Grow Your Own Brine Shrimp Sea Monkeys For Baby Fish & Reef Tanks. Hatch your own fish food or use as an educational tool. Includes base and 3 packets of Hatch Mix. Not intended to raise shrimp to adult size. Easy to setup, clean & maintain, Can be used again and again.
- FEATURES - An inexpensive and easy to maintain system to hatch your own baby brine shrimp over and over again.The jerky swimming motions of freshly hatched baby brine shrimp are known to trigger the feeding instinct of fish fry. Freshly hatched baby brine shrimp still contain their yolk sac and as such form a food rich in marine derived fatty acids. All natural, Highly nutritious, Excellent for fish and reefs, Proven to trigger a feeding response in fry.
- HIGH QUALITY - Freshly hatched brine shrimp are an excellent food for baby fish, small fish and reef tanks. San Francisco Bay Brand has supplied brine shrimp eggs for the ornamental fish industry for over forty years. Look for our San Francisco Bay Brand Hatchery Kit & Shrimpery to hatch your own fish food or use as an educational tool.
- RECOMMENDED FOR - Small or Baby Freshwater Fish: Egg Laying, Live Bearing, Platys, Tetras, Small Saltwater Fish: Gobies, Blennies, Saltwater Invertebrates: Tridacnid Clams, Crabs, Feather Dusters, Shrimps, Sea Apples. Corals: SPS, LP, Softies.
- FEEDING INSTRUCTIONS - Into a container add 1 quart (1 liter) of water, add 1 teaspoon of brine shrimp eggs, plug in air pump to start aeration, after 1 hour of rehydration add 2 tablespoons of aquarium (rock) salt and keep aeration on. Keep temperatures between 80-82 degrees F (26-28 degrees C), maintain a pH of 8.0 or above and eggs should hatch in 24-36 hours. After eggs hatch turn off aeration, direct a light source at the bottom, wait 5-10 minutes for shells to float to top and baby shrimp
- See more on Amazon...
Brand: San Francisco Bay Brand | Manufacturer: San Francisco Bay Brand, Inc.
Dimensions: 5.00 x 4.50 x 4.50 Inches | Weight: 0.50 pounds
Warranty: Warranty
See On Amazon Similar To San Francisco Bay Brand Shrimpery
#1
Saricho brine Shrimp Hatchery brine Shrimp Eggs Incubator Kits,Multifunctional Artemia Hatchery with air Pump,Live brine Shrimp net,Feeder,storagerand and Large Clip(Set of 20pcs)
Asin: B0BV73GLD1 | Model: FHQ-hatchery with pump and large clip | PartNumber: FHQ-hatchery with pump and large clip
3. Collect Brine Shrimp Fry To Realize Automatic Feeding: When Hatching Is Completed, It Can Be Collected And Drained With A Brine Shrimp Collection Net, And Then Use The Equipped Saltwater Shrimp Straw To Suck The Collected Shrimp Seedlings And Feed Them Directly, Or Put The Collected Shrimp Fry Into The Automatic Feeding System Which Can Be Adsorbed In The Fish Tank, And The Automatic Feeding Can Be Realized Through The Small Hole At The Bottom Of The Automatic Brine Shrimp Feeder For Fish.
5. The Shape Of The Brine Shrimp Hatcher Is Simple And Beautiful, The Hatching Process Is Visible, And It Is Highly Ornamental. It Can Clearly Observe The Whole Process Of Shrimp Eggs Hatching Into Shrimp Fry, And Witness The Miracle Of Life Hatching..
4. Excessive Shrimp Fry Can Be Stored In The Brine Shrimp Fry Storage Bottle Equipped With This Product For Next Use.
2. The Installation Methods Of The Brine Shrimp Hatcher Machine Provide A Variety Of Options. The Incubator For Brine Shrimp Can Be Installed Vertically Inside Or Outside The Glass Of The Fish Tank, Or The Equipped The Four-Corner Bracket Installs The Incubator On Any Platform Outside The Fish Tank..
Features
- 1. Fully equipped:Brine shrimp incubator provide a set of tools (20 pcs in total) for oxygen supply, hatching, and collection, feeding and storage of live brine shrimp fry after hatching, including: a brine shrimp eggs incubator , a air Pump, a acrylic rigid tube, 30 centimetre transparent Silicone hose,100 centimetre black Silicone hose, a air stone, a check valve, a regulating valve, a brine shrimp collection net, three brine shrimp straws , two automatic brine shrimp feeders, five storagers and a adjusting clip for brine shrimp
- 2. The installation methods of the brine shrimp hatcher machine provide a variety of options. The incubator for brine shrimp can be installed vertically inside or outside the glass of the fish tank, or the equipped The four-corner bracket installs the incubator on any platform outside the fish tank.
- 3. collect brine shrimp fry to realize automatic feeding: when hatching is completed, it can be collected and drained with a brine shrimp collection net, and then Use the equipped saltwater shrimp straw to suck the collected shrimp seedlings and feed them directly, or put the collected shrimp fry into the automatic feeding system which can be adsorbed in the fish tank, and the automatic feeding can be realized through the small hole at the bottom of the automatic brine shrimp feeder for fish
- 4. Excessive shrimp fry can be stored in the brine shrimp fry storage bottle equipped with this product for next use
- 5. The shape of the brine shrimp hatcher is simple and beautiful, the hatching process is visible, and it is highly ornamental. It can clearly observe the whole process of shrimp eggs hatching into shrimp fry, and witness the miracle of life hatching.
- See more on Amazon...
Brand: Saricho | Manufacturer: Saricho
Dimensions: 3.74 x 12.40 x 3.74 inches
Warranty: 2 year manufacturer
See On Amazon #2
Brine Shrimp Sea Monkey Eggs Hatch Mix, 3 Pack 0.74-Ounce (21 Gram) Pouches | Excellent Food Source Baby Aquarium Fish Artemia Replacement San Francisco Bay Brand
Asin: B000255UZI | Model: 9013 | PartNumber: 9013 | Ean: 0000945662004 | UPC: 000945662004
Recommended For - Small Or Baby Freshwater Fish: Egg Laying, Live Bearing, Platys, Tetras, Small Saltwater Fish: Gobies, Blennies, Saltwater Invertebrates: Tridacnid Clams, Crabs, Feather Dusters, Shrimps, Sea Apples. Corals: Sps, Lp, Softies.
Guaranteed Analysis - Crude Protein Min 55.0%, Crude Fat Min 18.0%, Crude Fiber Max 5.0%, Moisture Max 9.0%.
Feeding Instructions - Into A Container Add 1 Quart (1 Liter) Of Water, Add 1 Teaspoon Of Brine Shrimp Eggs, Plug In Air Pump To Start Aeration, After 1 Hour Of Rehydration Add 2 Tablespoons Of Aquarium (Rock) Salt And Keep Aeration On. Keep Temperatures Between 80-82 Degrees F (26-28 Degrees C), Maintain A Ph Of 8.0 Or Above And Eggs Should Hatch In 24-36 Hours. After Eggs Hatch Turn Off Aeration, Direct A Light Source At The Bottom, Wait 5-10 Minutes For Shells To Float To Top And Baby Shrimp.
Features - An Inexpensive And Easy To Maintain System To Hatch Your Own Baby Brine Shrimp Over And Over Again.The Jerky Swimming Motions Of Freshly Hatched Baby Brine Shrimp Are Known To Trigger The Feeding Instinct Of Fish Fry. Freshly Hatched Baby Brine Shrimp Still Contain Their Yolk Sac And As Such Form A Food Rich In Marine Derived Fatty Acids. All Natural, Highly Nutritious, Excellent For Fish And Reefs, Proven To Trigger A Feeding Response In Fry..
Features
- HIGH QUALITY - Freshly hatched brine shrimp are an excellent food for baby fish, small fish and reef tanks. San Francisco Bay Brand has supplied brine shrimp eggs for the ornamental fish industry for over forty years. Look for our San Francisco Bay Brand Hatchery Kit & Shrimpery to hatch your own fish food or use as an educational tool.
- FEATURES - An inexpensive and easy to maintain system to hatch your own baby brine shrimp over and over again.The jerky swimming motions of freshly hatched baby brine shrimp are known to trigger the feeding instinct of fish fry. Freshly hatched baby brine shrimp still contain their yolk sac and as such form a food rich in marine derived fatty acids. All natural, Highly nutritious, Excellent for fish and reefs, Proven to trigger a feeding response in fry.
- RECOMMENDED FOR - Small or Baby Freshwater Fish: Egg Laying, Live Bearing, Platys, Tetras, Small Saltwater Fish: Gobies, Blennies, Saltwater Invertebrates: Tridacnid Clams, Crabs, Feather Dusters, Shrimps, Sea Apples. Corals: SPS, LP, Softies
- FEEDING INSTRUCTIONS - Into a container add 1 quart (1 liter) of water, add 1 teaspoon of brine shrimp eggs, plug in air pump to start aeration, after 1 hour of rehydration add 2 tablespoons of aquarium (rock) salt and keep aeration on. Keep temperatures between 80-82 degrees F (26-28 degrees C), maintain a pH of 8.0 or above and eggs should hatch in 24-36 hours. After eggs hatch turn off aeration, direct a light source at the bottom, wait 5-10 minutes for shells to float to top and baby shrimp
- GUARANTEED ANALYSIS - Crude Protein Min 55.0%, Crude Fat Min 18.0%, Crude Fiber Max 5.0%, Moisture Max 9.0%
- See more on Amazon...
Brand: San Francisco Bay Brand | Manufacturer: San Francisco Bay Brand, Inc
Dimensions: 6.50 x 5.25 x 0.54 inches | Weight: 0.15 pounds
Warranty: Warranty
See On Amazon #3
San Francisco Bay Brand Brine Shrimp Eggs Vial 0.2-Ounces (6 Grams) | Excellent Food Source Baby Aquarium Fish, Freshwater, Reef & Saltwater Marine Tank Hatchery Fry
Asin: B007PGPLXS | Model: 945650315 | PartNumber: 945650315 | Ean: 0700580091183, 0000945650315 | UPC: 700580091183, 000945650315
Features - The Jerky Swimming Motions Of Freshly Hatched Baby Brine Shrimp Are Known To Trigger The Feeding Instinct Of Fish Fry. Freshly Hatched Baby Brine Shrimp Still Contain Their Yolk Sac And As Such Form A Food Rich In Marine Derived Fatty Acids. All Natural, Highly Nutritious, Excellent For Fish And Reefs, Proven To Trigger A Feeding Response In Fry..
Guaranteed Analysis - Crude Protein Min 55.0%, Crude Fat Min 18.0%, Crude Fiber Max 5.0%, Moisture Max 9.0%.
Feeding Instructions - Into A Container Add 1 Quart (1 Liter) Of Water, Add 1 Teaspoon Of Brine Shrimp Eggs, Plug In Air Pump To Start Aeration, After 1 Hour Of Rehydration Add 2 Tablespoons Of Aquarium (Rock) Salt And Keep Aeration On. Keep Temperatures Between 80-82 Degrees F (26-28 Degrees C), Maintain A Ph Of 8.0 Or Above And Eggs Should Hatch In 24-36 Hours. After Eggs Hatch Turn Off Aeration, Direct A Light Source At The Bottom, Wait 5-10 Minutes For Shells To Float To Top And Baby Shrimp To Swim To Bottom. Remove Airline At Pump End. Keeping Above Water Surface, Slowly Lower Airline And Siphon Water Into Fine Net. Rinse Shrimp Under Fresh Water And Feed To Fish..
Recommended For - Small Or Baby Freshwater Fish: Egg Laying, Live Bearing, Platys, Tetras, Small Saltwater Fish: Gobies, Blennies, Saltwater Invertebrates: Tridacnid Clams, Crabs, Feather Dusters, Shrimps, Sea Apples. Corals: Sps, Lp, Softies.
Features
- HIGH QUALITY - Freshly hatched brine shrimp are an excellent food for baby fish, small fish and reef tanks. San Francisco Bay Brand has supplied brine shrimp eggs for the ornamental fish industry for over forty years. Look for our San Francisco Bay Brand Hatchery Kit & Shrimpery to hatch your own fish food or use as an educational tool.
- RECOMMENDED FOR - Small or Baby Freshwater Fish: Egg Laying, Live Bearing, Platys, Tetras, Small Saltwater Fish: Gobies, Blennies, Saltwater Invertebrates: Tridacnid Clams, Crabs, Feather Dusters, Shrimps, Sea Apples. Corals: SPS, LP, Softies
- FEATURES - The jerky swimming motions of freshly hatched baby brine shrimp are known to trigger the feeding instinct of fish fry. Freshly hatched baby brine shrimp still contain their yolk sac and as such form a food rich in marine derived fatty acids. All natural, Highly nutritious, Excellent for fish and reefs, Proven to trigger a feeding response in fry.
- FEEDING INSTRUCTIONS - Into a container add 1 quart (1 liter) of water, add 1 teaspoon of brine shrimp eggs, plug in air pump to start aeration, after 1 hour of rehydration add 2 tablespoons of aquarium (rock) salt and keep aeration on. Keep temperatures between 80-82 degrees F (26-28 degrees C), maintain a pH of 8.0 or above and eggs should hatch in 24-36 hours. After eggs hatch turn off aeration, direct a light source at the bottom, wait 5-10 minutes for shells to float to top and baby shrimp to swim to bottom. Remove airline at pump end. Keeping above water surface, slowly lower airline and siphon water into fine net. Rinse shrimp under fresh water and feed to fish.
- GUARANTEED ANALYSIS - Crude Protein Min 55.0%, Crude Fat Min 18.0%, Crude Fiber Max 5.0%, Moisture Max 9.0%
- See more on Amazon...
Brand: San Francisco Bay Brand | Manufacturer: San Francisco Bay Brand, Inc
Dimensions: 6.50 x 4.25 x 0.88 Inches | Weight: 0.01 pounds
Warranty: Warranty.
See On Amazon #4
Brine Shrimp Hatchery Kits brine Shrimp Eggs Incubator Hatchery brine Shrimp Eggs Incubator Artemia Hatchery with Silver air Pump
Asin: B09DVMBZQW
The First Way To Provide Oxygen To The Brine Shrimp Incubator Is To Put The Bubble Stone In The Incubator To Provide Oxygen. When The Brine Shrimp Has Hatched, Open The Trim Valve At The Bottom Of The Incubator To Collect Brine Shrimp. Note That The Direction Of The Inlet And Outlet Of The Check Valve Must Be Installed Correctly With The Pipe, Otherwise The Air Pump Will Not Be Able To Discharge Air..
The Second Way To Provide Oxygen To The Brine Shrimp From The Bottom Hole Of The Incubator. Please Note The Direction Of The Inlet And Outlet Of The Check Valve And The Pipe Must Be Installed Correctly, Otherwise The Air Pump Will Not Be Able To Output Air, And The Trim Valve Needs To Be Opened. When The Brine Shrimp Has Hatched, First Turn Off The Trim Valve, Then Pull Out The Air Pump Tube From The Trim Valve, And Then Open The Trim Valve To Start Collecting Brine Shrimp.
If You Use The First Way To Install The Brine Shrimp Incubator,Please Remember To Use A Scissor To Cut One Piece Small Tubing Like 0.5 Inch Long In The Product Package To Connect The Gray Acrylic Tube And Air Stone And Cut The Other Small Tubing 0.5 Inch In The Product Package To Connect The Gray Acrylic Tube And Lid.Please Note That Gray Acrylic Tube Is Not Able To Connect To Air Stone And Lid Directly,Which Need Two Small Piece Tubing To Connect Air Stone And Lid..
There Are Two Ways To Install Our Brine Shrimp Hatcher Machine.You Can Use The Four Suction Cup Of Shrimp Incubator To Stick It To The Tank Glass Inside Or You Wanna Install It Out Of The Tank Glass Then You Can Use The Tripod To Install Out Of The Tank..
Features
- The brine shrimp incubator contains 1pcs brine shrimp eggs incubator Hatchery 1pcs silver air pump with 1pcs black controller valve,1pcs check valve, 1pcs air stone,11.8 Inch long transparent aquarium tubing, 1 meter black airline ,one unit brine shrimp net colllector,two units automatic brine shrimp feeder for fish,three units Brine shrimp suction tube and six units Brine shrimp storage bottle
- There are two ways to install our brine shrimp hatcher machine.You can use the four suction cup of shrimp incubator to stick it to the tank glass inside or you wanna install it out of the tank glass then you can use the tripod to install out of the tank.
- The first way to provide oxygen to the brine shrimp incubator is to put the bubble stone in the incubator to provide oxygen. When the brine shrimp has hatched, open the trim valve at the bottom of the incubator to collect brine shrimp. Note that the direction of the inlet and outlet of the check valve must be installed correctly with the pipe, otherwise the air pump will not be able to discharge air.
- If you use the first way to install the brine shrimp incubator,Please remember to use a scissor to cut one piece small tubing like 0.5 Inch long in the product package to connect the gray acrylic tube and air stone and cut the other small tubing 0.5 Inch in the product package to connect the gray acrylic tube and lid.Please note that gray acrylic tube is not able to connect to air stone and lid directly,which need two small piece tubing to connect air stone and lid.
- The second way to provide oxygen to the brine shrimp from the bottom hole of the incubator. Please note the direction of the inlet and outlet of the check valve and the pipe must be installed correctly, otherwise the air pump will not be able to output air, and the trim valve needs to be opened. When the brine shrimp has hatched, first turn off the trim valve, then pull out the air pump tube from the trim valve, and then open the trim valve to start collecting brine shrimp
- See more on Amazon...
Brand: NestBasics | Manufacturer: NestBasics
See On Amazon #5
San Francisco Bay Brand Brine Shrimp Hatchery Kit Includes 3 Packets of Brine Shrimp Eggs Hatch Mix | Excellent Food Source Baby Aquarium Fish, Freshwater, Reef & Saltwater Marine Tanks Hatchery Fry
Asin: B0041U878C | Model: 66190 | PartNumber: 66190 | Ean: 0000945661908, 0523160153275 | UPC: 000945661908, 523160153275
High Quality - Freshly Hatched Brine Shrimp Are An Excellent Food For Baby Fish, Small Fish And Reef Tanks. San Francisco Bay Brand Has Supplied Brine Shrimp Eggs For The Ornamental Fish Industry For Over Forty Years. Look For Our San Francisco Bay Brand Hatchery Kit & Shrimpery To Hatch Your Own Fish Food Or Use As An Educational Tool..
Setup - Setting Up The Hatchery - Take A 2 Liter Soda Bottle And Cut Off The Bottom Of The Bottle (Right Where It Starts To Curve Inward). Turn The Bottle Upside Down And Screw It Into The Hatchery Base. Attach One End Of The Airline Tubing To The Bottom Of The Base And The Other End To An Air Pump. To Prevent Pump Damage During A Power Failure Use A Check Valve (Found At Your Local Pet/Fish Store) Or Place Pump Above Water Surface Level..
Recommended For - Small Or Baby Aquarium Freshwater Fish: Egg Laying, Live Bearing, Platys, Tetras, Small Saltwater Fish: Gobies, Blennies, Saltwater Invertebrates: Tridacnid Clams, Crabs, Feather Dusters, Shrimps, Sea Apples. Corals: Sps, Lp, Softies & More..
Features - An Inexpensive And Easy To Maintain System To Hatch Your Own Baby Brine Shrimp Over And Over Again.The Jerky Swimming Motions Of Freshly Hatched Baby Brine Shrimp Are Known To Trigger The Feeding Instinct Of Fish Fry. Freshly Hatched Baby Brine Shrimp Still Contain Their Yolk Sac And As Such Form A Food Rich In Marine Derived Fatty Acids. All Natural, Highly Nutritious, Excellent For Fish And Reefs, Proven To Trigger A Feeding Response In Fry..
Features
- EASY TO USE - Grow Your Own Brine Shrimp For Baby Fish & Reef Tanks. Hatch your own fish food or use as an educational tool. Includes base and 3 packets of Hatch Mix. Add soda bottle, air pump and water. Not intended to raise shrimp to adult size. Easy to setup, clean & maintain, Can be used again and again.
- FEATURES - An inexpensive and easy to maintain system to hatch your own baby brine shrimp over and over again.The jerky swimming motions of freshly hatched baby brine shrimp are known to trigger the feeding instinct of fish fry. Freshly hatched baby brine shrimp still contain their yolk sac and as such form a food rich in marine derived fatty acids. All natural, Highly nutritious, Excellent for fish and reefs, Proven to trigger a feeding response in fry.
- HIGH QUALITY - Freshly hatched brine shrimp are an excellent food for baby fish, small fish and reef tanks. San Francisco Bay Brand has supplied brine shrimp eggs for the ornamental fish industry for over forty years. Look for our San Francisco Bay Brand Hatchery Kit & Shrimpery to hatch your own fish food or use as an educational tool.
- RECOMMENDED FOR - Small or Baby Aquarium Freshwater Fish: Egg Laying, Live Bearing, Platys, Tetras, Small Saltwater Fish: Gobies, Blennies, Saltwater Invertebrates: Tridacnid Clams, Crabs, Feather Dusters, Shrimps, Sea Apples. Corals: SPS, LP, Softies & More.
- SETUP - Setting up the Hatchery - Take a 2 liter soda bottle and cut off the bottom of the bottle (right where it starts to curve inward). Turn the bottle upside down and screw it into the Hatchery base. Attach one end of the airline tubing to the bottom of the base and the other end to an air pump. To prevent pump damage during a power failure use a check valve (found at your local pet/fish store) or place pump above water surface level.
- See more on Amazon...
Brand: San Francisco Bay Brand | Manufacturer: San Francisco Bay Brand, Inc.
Dimensions: 9.13 x 4.63 x 2.63 inches | Weight: 1.00 Pounds
See On Amazon #6
Brine Shrimp Hatch Mix 3/Pkg
Asin: B003SN6RPI | Model: SF66200 | PartNumber: SF66200 | Ean: 0000945662004 | UPC: 000945662004
Brand: SAN FRANCISCO BAY | Manufacturer: San Francisco Bay
Dimensions: 0.75 x 6.50 x 4.25 inches
See On Amazon #7
NEWCOMDIGI Brine Shrimp Hatchery Kit, Brine Shrimp Eggs Incubator, Brine Shrimp Eggs Hatchery Kit, DIY Aquarium Fish Tank Hatch Tool for Fish Food (4 PCS Set)
Asin: B07ZFF6DS2 | Model: Incubator | PartNumber: Incubator
★ ☀❤ Easy To Use: Connect The Air Pump To The Air Inlet At The Bottom Of The Incubator, Inject The Treated Water To The Standard Water Level In The Incubator Tank, And Add About 10G Sea Salt To Pre-Dissolve, Then Add 3-5G Brine Shrimp Eggs And Adjust The Appropriate Air Volume..
★ ☀❤ Satisfaction Guarantee: If You Have The Slightest Problem With Our Product, Please Feel Free To Give Us A Message And We Will Help You Solve Your Problems As Soon As Possible.We Go Out Of Our Way To Make Sure Every Customer Is Happy And Satisfied With Our Product And Service..
★ ☀❤ Package Including: The 4 Pcs Set Package Comes With 1 X Check Valve, 1 X Suction Cup Fixed Holder, 1 X Shrimp Incubator, 1 X Hose. The 17 Pcs Set Comes With 1 X Shrimp Hatchery, 1 X Black Control Valve, 1 X Check Valve, 1 X Air Stone, 1 Meter Of Transparent Air Hose, 1 X Shrimp Trap, 2 X Automatic Shrimp Feeders, 3 X Brine Shrimp Straws, 6 X Brine Shrimp Storage Bottles. (Shrimp Egg Is Not Included)..
★ ☀❤ Inside Or Outside Tank Use: Our Brine Shrimp Hatchery Kit Is A More Good Looking And Effective Aquarium Feeding Tool. The Ability To Use It Inside The Tank With Suction Cups And Outside The Tank With The Included Stand. Just Make Sure The Temperature Is Suitable..
Features
- Premium Material: Our baby brine shrimp hatchery kit is made of high quality acrylic which features nontoxic, harmless, sturdy, durable, not easy to crack or break and can be used for a long service life. It is safe for your baby fishes and shrimps.
- Inside or Outside Tank Use: Our brine shrimp hatchery kit is a more good looking and effective aquarium feeding tool. The ability to use it inside the tank with suction cups and outside the tank with the included stand. Just make sure the temperature is suitable.
- Easy to Use: Connect the air pump to the air inlet at the bottom of the incubator, inject the treated water to the standard water level in the incubator tank, and add about 10g sea salt to pre-dissolve, then add 3-5g brine shrimp eggs and adjust the appropriate air volume.
- Package Including: The 4 PCS Set package comes with 1 x check valve, 1 x suction cup fixed holder, 1 x shrimp incubator, 1 x hose. The 17 PCS Set comes with 1 x shrimp hatchery, 1 x black control valve, 1 x check valve, 1 x air stone, 1 meter of transparent air hose, 1 x shrimp trap, 2 x automatic shrimp feeders, 3 x brine shrimp straws, 6 x brine shrimp storage bottles. (shrimp egg is not included).
- Satisfaction Guarantee: If you have the slightest problem with our product, please feel free to give us a message and we will help you solve your problems as soon as possible.We go out of our way to make sure every customer is happy and satisfied with our product and service.
- See more on Amazon...
Brand: NEWCOMDIGI | Manufacturer: NEWCOMDIGI
Warranty: 2 year
See On Amazon #8
San Francisco Bay Brand ASF71109 Freeze Dried Brine Shrimp for Fresh and Saltwater Fish, 20gm
Asin: B0002DGW2U | Model: 945711092 | PartNumber: 945711092 | Ean: 0000945711092 | UPC: 000945711092
Highly Nutritious And Excellent Main Diet, Supplement Or Treat Or Finicky Feeders.
Available In A 20-Grams Pack.
Provides The Essential Nutrients To Maintain High Energy Levels And Vigor In Your Fish.
Great Stimulant And Nutrition Source For All Tropical Fish.
Features
- Freeze dried brine shrimp shrimpery is designed for fresh and saltwater fish
- Great stimulant and nutrition source for all tropical fish
- Highly nutritious and excellent main diet, supplement or treat or finicky feeders
- Provides the essential nutrients to maintain high energy levels and vigor in your fish
- Available in a 20-grams pack
- See more on Amazon...
Brand: San Francisco Bay Brand | Manufacturer: TopDawg Pet Supply
Dimensions: 2.13 x 4.50 x 2.13 inches | Weight: 0.10 Pounds
Warranty: Warranty
See On Amazon #9
San Francisco Bay Brand ASF71130 Freeze Dried Brine Shrimp for Fresh and Saltwater Fish, 85gm
Asin: B006OORFX6 | Model: 9017 | PartNumber: 9017 | Ean: 0000945711306 | UPC: 000945711306
Highly Nutritious And Excellent Main Diet, Supplement Or Treat Or Finicky Feeders.
Available In A 85-Grams Pack.
Provides The Essential Nutrients To Maintain High Energy Levels And Vigor In Your Fish.
Great Stimulant And Nutrition Source For All Tropical Fish.
Features
- Freeze dried brine shrimp shrimpery is designed for fresh and saltwater fish
- Great stimulant and nutrition source for all tropical fish
- Highly nutritious and excellent main diet, supplement or treat or finicky feeders
- Provides the essential nutrients to maintain high energy levels and vigor in your fish
- Available in a 85-grams pack
- See more on Amazon...
Brand: San Francisco Bay Brand | Manufacturer: TopDawg Pet Supply
Dimensions: 3.00 x 3.00 x 3.00 Inches | Weight: 0.30 pounds
See On Amazon #10
San Francisco Bay Brand Asf71120 Freeze Dried Brine Shrimp For Fresh And Saltwater Fish, 39Gm
Asin: B0006JLUX6 | Model: 9016 | PartNumber: 9016 | Ean: 0000945711207 | UPC: 000945711207
Highly Nutritious And Excellent Main Diet, Supplement Or Treat Or Finicky Feeders.
Available In A 39-Grams Pack.
Provides The Essential Nutrients To Maintain High Energy Levels And Vigor In Your Fish.
Great Stimulant And Nutrition Source For All Tropical Fish.
Features
- Freeze Dried Brine Shrimp Shrimpery Is Designed For Fresh And Saltwater Fish
- Great Stimulant And Nutrition Source For All Tropical Fish
- Highly Nutritious And Excellent Main Diet, Supplement Or Treat Or Finicky Feeders
- Provides The Essential Nutrients To Maintain High Energy Levels And Vigor In Your Fish
- Available In A 39-Grams Pack
- See more on Amazon...
Brand: San Francisco Bay Brand | Manufacturer: TopDawg Pet Supply
Dimensions: 2.30 x 5.50 x 2.40 inches | Weight: 0.05 Pounds
See On Amazon
Looking For Something Else?
Search