Spurick - Buying Guide
Last Updated: 05/26/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
1/2" NPT Solid Brass Drain Plugs commonly Used in Boat Hulls, 2 Pack Solid Brass Boat Hull Spare Garboard Drain Plug for Bayliner Four Winns Glastron Larson Sea Ray Starcraft and Many Other Models
Asin: B0BHHPPR93 | Ean: 0767514232890 | UPC: 767514232890
This Item For Sale Is A Brand New 2-Pack Of 1/2" Npt Solid Brass Drain Plugs Commonly Used In Boat Hulls. High Quality And Deep Threads Allow The Fittings To Bite Better, Tight Threads, Not Easy To Slip..
It Can Also Be Used With Grease, Fuels, Lp And Natural Gas, Refrigeration, Instrumentation And Hydraulic Systems In Low And Medium Pressure Pipe Line Connections..
Used On Most Boats Such As: Bayliner, Four Winns, Glastron, Larson, Sea Ray, Starcraft And Many Other Models. Unique Design Achieves Very Good Waterproof Sealing Performance..
Precision Thread And Solid Brass, More Durable, Ductility At High Temperatures, And Low Magnetic Permeability, Not Hollow Like Many Poor Quality Plugs That Rot And Sink Boats..
Features
- Cast Brass Pipe Plug, 1/2" NPT solid brass Drain Plugs. These are made to stopper drain holes on boat transoms. It fits a standard transom drain hole. Check the size of your transom hole.
- Precision thread and solid brass, more durable, ductility at high temperatures, and low magnetic permeability, not hollow like many poor quality plugs that rot and sink boats.
- This item for sale is a brand new 2-Pack of 1/2 NPT solid brass Drain Plugs commonly used in boat hulls. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip.
- Used on Most boats such as: Bayliner, Four Winns, Glastron, Larson, Sea Ray, Starcraft And many other models. Unique design achieves very good waterproof sealing performance.
- It can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections.
- See more on Amazon...
Brand: Spurick | Manufacturer: Spurick Parts
See On Amazon #2
Kayak Drain Plug Kit, Nylon Thread Drain Stopper for Scrambler Ocean Kayak Hobie Ascend Old Town Vapor Wave Sport Jackson Kraken Field and Stream Kayak Dinghy Canoe Boat
Asin: B09H6MRZFS | Ean: 0767514210898 | UPC: 767514210898
【Easy To Install】We Just Need To Screwed It Into The Sleeve Directly. There Is A Red Rubber Ring On Each Of Them, Which Greatly Increases Its Waterproof Performance, And Prevent Water From Entering Your Boat..
【Purchase Guarantee】We Provide You With A Free Return Policy, No Risk Purchase. A Set Of Four Products Is Enough For You To Use A Lot Of Time. Reminder: Please Do Not Buy Cheap And Inferior Drain Plugs, Which Will Damage Your Kayak And Boat..
【Widely Application】The Threaded Drain Plug Kit Is Suitable For Many Types Of Kayaks. Perfectly Suitable For Old Town Vapor, Ascend Fs10, Wave Sport "Y", Hobie Pa14, Jackson Kraken, Vibe Yellowfin, Jackson Cuda, Field And Stream Eagle Talon, Scrambler Ocean, Field And Stream Kayak..
【Protective Effects】The Thread Drain Plug Is Used To Stop Seepage And Drain The Water From The Hull, And They Can Remain Sealed Under High Vibration Conditions And Protect The Hull From Damage With The Rubber Gasket..
Features
- Durable Materials The kayak drain plug is made of quality nylon,which is durable and and not easy to break, lightweight and portable. The clever thread design allows the drain plug to be firmly combined with the kayak.
- Protective Effects The thread drain plug is used to stop seepage and drain the water from the hull, and they can remain sealed under high vibration conditions and protect the hull from damage with the rubber gasket.
- Easy to Install We just need to screwed it into the sleeve directly. There is a red rubber ring on each of them, which greatly increases its waterproof performance, and prevent water from entering your boat.
- Widely Application The threaded drain plug kit is suitable for many types of kayaks. Perfectly suitable for Old Town Vapor, Ascend FS10, Wave Sport Y, Hobie PA14, Jackson Kraken, Vibe Yellowfin, Jackson Cuda, Field and Stream Eagle Talon, Scrambler ocean, Field and Stream kayak.
- Purchase Guarantee We provide you with a free return policy, no risk purchase. A set of four products is enough for you to use a lot of time. Reminder: Please do not buy cheap and inferior drain plugs, which will damage your kayak and boat.
- See more on Amazon...
Brand: Spurick | Manufacturer: Spurick Parts
See On Amazon #3
Motor Prop Shear Pins 2092600 Compatible with Minn Kota Trolling Motors Fits for Minnkota Shear pin MKP-2 MKP-3 MKP-6 MKP-7 MKP-25 MKP-37
Asin: B0BWHY7RPN | Ean: 0767738566535 | UPC: 767738566535
Motor Prop Shear Pins Easy To Install,Easy Installation Without Additional Tools. Please Wear Gloves To Protect Your Hands During Installation. In The Package: 4 Pack Of Stainless Steel Prop Drive Pins..
Replacing Broken Shear Pin On Your Minkota Thrust Motor. Back To Fishing! It's A Good Thing You Have A Spare Pins In Your Boat..
Trolling Motor Prop Pins 2092600 Fit Minn Kota 45 Lb, 50 Lb, 55 Lb, 65 Lb. Compatible With Terrova Riptide, Newport Vessels, Endura, Edge And Other Series. (Note:Does Not Fit Mkp-2 Endurance Motor.).
Our Motor Drive Pin 2092600 Is Stainless Steel Prop Pins,Not Easy To Damage, Durable. Perfect For Restoring Your Prop Motor Drive. Replacement For All Minn Kota Trolling Motors..
Features
- Our shear pins 2092600 compatible with Minn Kota MKP-2,MKP-3,MKP-6,MKP-7,MKP-25,MKP-37. Approximate measurement: 1" x 1/8".
- Our motor drive pin 2092600 is stainless steel prop Pins,not easy to damage, durable. Perfect for restoring your prop motor drive. Replacement For All Minn Kota Trolling Motors.
- Motor prop shear pins easy to install,easy installation without additional tools. Please wear gloves to protect your hands during installation. In the package: 4 Pack of Stainless Steel Prop Drive Pins.
- Trolling motor prop pins 2092600 fit Minn Kota 45 lb, 50 lb, 55 lb, 65 lb. Compatible with Terrova Riptide, Newport Vessels, Endura, Edge and other series. (Note:Does not fit MKP-2 Endurance motor.)
- Replacing broken shear pin on your Minkota thrust motor. Back to fishing! It's a good thing you have a spare pins in your boat.
- See more on Amazon...
Brand: Spurick | Manufacturer: Spurick Motor Prop Pins
Warranty: 2 Year
See On Amazon #4
Boat Kill Switch Lanyard Fit Most Mercury Mercruiser Jet Ski Marine Outboard, Replace 8M0092850 Boat Engine Stop Kill Switch Rope Tether Emergency Safety Cut Off Cord - 15920T54 15920A54
Asin: B0C3XGD2Y8 | Model: 8M0092850,15920Q54, 823037A09 | PartNumber: 8M0092850,15920Q54, 823037A09 | Ean: 0787415867687 | UPC: 787415867687
Fit Most Boat Jet Ski,Marine Kill Stop Switch Lanyard Can Be Replace # 8M0092850 823037A09 8M0092849 15920T54 15920A54 15920Q54. Exactly Designed For Most Fit Most Mercury Marine Outboard Bass Boat..
With Large Aluminum Alloy Buckle, You Can Easily Attached It To Your Clothing Or Life Jacket Or Wrist, No Need To Worry About It Breaking Suddenly. The Boat Key Lanyard Is Easy To Clip On Or Take Off, Very Easy To Use..
Exactly Designed For Most Mercruiser Marine Outboard Kill Switch Lanyard. 7.5" Coils And Stretches Close To 49" Or More, Long Enough To Sit More Comfortably On The Dinghy..
The Engine Stop Wrist Strap Lanyard Made Of Aluminum Alloy Clip,Stretchable Nylon Coils. Durable, Waterproof And Lightweight..
Features
- To keep your safe while you boating. The boat safety lanyard is used for engine emergency stop,When the lanyard is pulled up, the switch will turn off, the engine will stop, the boat will slow down, and then stop,helping to avoid accidents and ensuring your safety.
- The engine stop wrist strap lanyard made of aluminum alloy clip,stretchable nylon coils. Durable, waterproof and lightweight.
- Fit most boat jet ski,marine kill stop switch lanyard can be Replace # 8M0092850 823037A09 8M0092849 15920T54 15920A54 15920Q54. Exactly designed for most fit most mercury marine outboard bass boat.
- Exactly designed for most Mercruiser Marine outboard kill switch lanyard. 7.5 coils and stretches close to 49 or more, long enough to sit more comfortably on the dinghy.
- With large aluminum alloy buckle, you can easily attached it to your clothing or life jacket or wrist, no need to worry about it breaking suddenly. The boat key lanyard is easy to clip on or take off, very easy to use.
- See more on Amazon...
Brand: Spurick | Manufacturer: Spurick Boat Kill Switch Lanyard
Dimensions: 1.50 x 1.80 x 1.80 inches
See On Amazon #5
6 Pieces Surfboard Fin Screws, No Tool Stainless Steel Thumb Fin Screw for SUP Surf Longboard Paddleboard and BoardWorks SUP Center Fin Adapters Surfing Accessories
Asin: B09H5F6GQJ | Ean: 0767514210683 | UPC: 767514210683
【Protect Your Surfboard】: Up Until Now Someone Had Always Used Screws To Hold In Longboard Fins And Was Forever Frustrated With Screwdrivers Jumping And Scratching Fins/Boards Etc. Those Days Are Over. These Fin Screws Will Definitely Protect Your Sup Or Paddleboard..
【What You Will Get】: One Package Include 6 Pieces Surfboard Fin Screws, Sufficient Quantity To Meet Your Daily Needs, Which Are Nice For Your Daily Surf Sessions..
【Compatible With】: Our Fin Screw Fits Most Standard Surfboard Fin Boxes For Longboard, Sup, Single Fin, Paddle Board; These Fin Screws Are Great For Any Board With A Center Box Fin Set Up..
【Easy To Use】: Hand Tighten Against Rubber O-Ring Means No Tools Required, Do Not Need A Screwdriver To Install, Adjust, Or Remove Your Longboard Fin Or Stand Up Paddle Board Fin; No More Tools Get You Out On The Water Faster..
Features
- HIGH-QUALITY MATERIALS : Stainless steel surf fin screw will not rust in fresh or salty water; Besides, the rubber o-ring and acts as a 'spring' to insure the screw has pressure on it and can tighten it down without scratching the board.
- EASY TO USE : Hand tighten against rubber o-ring means no tools required, do not need a screwdriver to install, adjust, or remove your longboard fin or stand up paddle board fin; No more tools get you out on the water faster.
- PROTECT YOUR SURFBOARD : Up until now someone had always used screws to hold in longboard fins and was forever frustrated with screwdrivers jumping and scratching fins/boards etc. Those days are over. These fin screws will definitely protect your sup or paddleboard.
- COMPATIBLE WITH : Our fin screw fits most standard surfboard fin boxes for longboard, SUP, single fin, paddle board; These fin screws are great for any board with a center box fin set up.
- WHAT YOU WILL GET : One package include 6 pieces surfboard fin screws, sufficient quantity to meet your daily needs, which are nice for your daily surf sessions.
- See more on Amazon...
Brand: Spurick | Manufacturer: Spurick Parts
Warranty: Yes
See On Amazon