REEPLAR - Buying Guide
Last Updated: 05/17/2024
Share on
Bestselling from REEPLAR on Amazon
- REEPLAR (10 Rolls) 2" x 50' Deck Joist Butyl Tape, (Upgraded Strong Tape) Joist Tape for decking, De...
- Upgraded Pipe Center Finder, Measure Pipe Diameter, Pipefitter Tools With Centering Head, Measure Pi...
- Upgraded Compressor Jumper Hose, Both Sides Fittings 3/4" NPT Male Connector, 720 PSI, High-Temperat...
- 000009123 IH9123 33129026 water inlet valve for manitowoc ice machines, 120V 60Hz 5W fits for I, IB,...
- REEPLAR 2 in x 20 ft Green PVC Suction Hose, With 1 Male aluminum cam lock fitting, Suction Strainer...
- 3587 Standard Magnetic Impeller, 3220 Mcx Standard Bearing Housing, Compatible with Grindmaster Crat...
- 000009123 IH9123 33129026 water inlet valve assembly for manitowoc ice machines, 120V 60Hz 5W fits f...
- Condenser Fan Motor 5KCP39EGS070S,1/4 hp, 1100 RPM,208-230V Condenser Fan Motor Replacement Compatib...
- B625 Booster Pump Motor 3/4 HP - fit for Polaris PB4-60 (PB460 PB-460) Booster Pump, for A.O. Smith ...
#1
REEPLAR (10 Rolls) 2" x 50' Deck Joist Butyl Tape, (Upgraded Strong Tape) Joist Tape for decking, Deck Flashing Tape, Waterproof Seal and Weather Resistance Tape, for Top of Joists, and Beams.
Asin: B0C53HXZRZ | Ean: 0796647731291 | UPC: 796647731291
【Easy To Use】The Deck Flashing Tape Installation And Use Process Is Simple, It Is Equipped With Easy To Peel Off The Protective Film, Before Use, Please Clean The Surface Of The Object To Be Stuck To Keep It Dry, And Then Cut The Tape To A Suitable Length To Stick..
【Tips】Please Note That If It Is In The Hot Season, We Recommend That You Refrigerate The Tape For A While Before Use, Which Will Help Remove The Attached Film. If It Is In Colder Air, It Will Affect The Adhesive Force Of The Tape, And Softening The Tape With A Hair Dryer Before Use Will Enhance The Stickiness. In Addition, The Tape Just Pasted May Not Be Very Sticky, And The Tape Will Reach The Maximum Stickiness After 24 Hours Of Pasting, Please Wait Patiently..
【Widely Used】Deck Joist Tape Can Repair Wooden Roof Beams, Wooden Beam Props, Fishing Boats, Rv Roof Repair, Etc. It Provides Long-Term Protection For Your Deck And Saves The Cost Of Future Maintenance And Replacement..
【High And Low Temperature Resistance】 Joist Tape For Decking Is Made Of Special Material And Can Be Used In The Temperature Range Of -20°F To 176°F, Which Is Suitable For All Kinds Of Weather..
Features
- Waterproof and anti-corrosion tape Joist tape with size 2'' x 50' is a waterproof butyl adhesive with a unique adhesive that prevents joists and beams from water damage and corrosion.
- High and low temperature resistance Joist tape for decking is made of special material and can be used in the temperature range of -20 F to 176 F, which is suitable for all kinds of weather.
- Easy to use The deck flashing tape installation and use process is simple, it is equipped with easy to peel off the protective film, before use, please clean the surface of the object to be stuck to keep it dry, and then cut the tape to a suitable length to stick.
- Widely used Deck joist tape can repair wooden roof beams, wooden beam props, fishing boats, RV roof repair, etc. It provides long-term protection for your deck and saves the cost of future maintenance and replacement.
- Tips Please note that if it is in the hot season, we recommend that you refrigerate the tape for a while before use, which will help remove the attached film. If it is in colder air, it will affect the adhesive force of the tape, and softening the tape with a hair dryer before use will enhance the stickiness. In addition, the tape just pasted may not be very sticky, and the tape will reach the maximum stickiness after 24 hours of pasting, please wait patiently.
- See more on Amazon...
Brand: REEPLAR | Manufacturer: REEPLAR
Dimensions: 12.50 x 10.60 x 6.20 inches | Weight: 19.00 pounds
See On Amazon #2
Upgraded Pipe Center Finder, Measure Pipe Diameter, Pipefitter Tools With Centering Head, Measure Pipe Diameter Over 0.5" & up With 4" Y-Type Base and Adjustable Dial Bubble Protractor
Asin: B0C8RZD2V1 | Model: GDZX-11 | PartNumber: GDZX-11 | Ean: 0796647742020 | UPC: 796647742020
📏[Adjustable Dial Bubble Protractor] The 4 Inch Y-Type Head Is Fitted With An Adjustable Dial Bubble Protractor (Dsl) Protractor For Enhanced Precision, Ensuring Accurate Measurements Every Time..
📏[Operation Steps]1. Use The Included Hex Wrench To Loosen Or Tighten The Hex Nut.2. Place The Pipeline Marking Tool On The Pipeline And Find The Desired Angle.3. Push The Center Pillar Downwards To The Fixed Point Position.4. Use A Hammer To Strike And Leave A Fixed Point Mark On The Pipeline..
📏[Durable And Sturdy Material]Made Of Highly Flexible Material And High-Quality Metal Raw Materials, This Pipe Fitter Tool Is Built To Last. Easily Measure Around Pipes, Making It A Reliable Tool For Repair Pipe Work..
📏[Easy To Use]Simply Loosen Or Tighten The Hexagonal Nut, Place The Tool On The Pipe, And Tap With A Hammer To Leave A Fixed Point Mark On The Pipe. With Just A Few Simple Steps, You Can Use This Pipe Marker Tool To Find The Angle You Want And Leave A Fixed Point Mark On The Pipe..
Features
- [Effortlessly Find Pipe Centers]This tool is perfect for pipefitters and welders to set center lines, determine angles, locate points inside pipes or tanks, mark butt-ins, and more. It can measure tanks or pipes with a diameter of at least 1/2" or larger, Perfect for pipe fitters and welders.
- [Easy to Use]Simply loosen or tighten the hexagonal nut, place the tool on the pipe, and tap with a hammer to leave a fixed point mark on the pipe. With just a few simple steps, you can use this pipe marker tool to find the angle you want and leave a fixed point mark on the pipe.
- [Adjustable Dial Bubble Protractor] The 4 inch Y-type head is fitted with an adjustable dial bubble protractor (DSL) protractor for enhanced precision, ensuring accurate measurements every time.
- [Durable and Sturdy Material]Made of highly flexible material and High-quality metal raw materials, this pipe fitter tool is built to last. Easily measure around pipes, making it a reliable tool for repair pipe work.
- [Operation steps]1. Use the included hex wrench to loosen or tighten the hex nut.2. Place the pipeline marking tool on the pipeline and find the desired angle.3. Push the center pillar downwards to the fixed point position.4. Use a hammer to strike and leave a fixed point mark on the pipeline.
- See more on Amazon...
Brand: REEPLAR | Manufacturer: REEPLAR
Dimensions: 1.40 x 6.30 x 4.20 Inches
See On Amazon #3
Upgraded Compressor Jumper Hose, Both Sides Fittings 3/4" NPT Male Connector, 720 PSI, High-Temperature 420 , Five Layers Material Reinforcement, Free-Rotating Assembly
Asin: B0C4Y89PN4 | Ean: 0796647731253 | UPC: 796647731253
【Perfect Size】40" Length, 3/4" Nominal Diameter, 1.14" Outer Diameter, And 3/4" Inner Diameter - Perfect For Your Compressor Needs..
【Reliable After Sale Guarantee】We Are Committed To Providing Our Customers With The Best Possible Service. If You Encounter Any Problems During Use, Or If You Receive Any Broken Or Chipped Items, Just One Email, We Will For You Within 24 Hours. You Can Request A Replacement Or A Full Refund. We Promise That You Will No Lose Any Money Or Suffer Any Inconvenience..
【Safe And Reliable】Protect Your Equipment And Maximize Your Air Compressor's Performance With This Compressor Hose - Absorb Vibration From The Air Compressor To The Filter Regulator Or Piping System To Extend Equipment Life..
【Easy To Install】 Compatible With Most Air Compressors On The Market. With 3/4" Npt Male Connectors & 3/4" G Flare Fittings(Both Sides) That Rotate Freely..
Features
- Fear No Heat & High Pressure Strength REEPLAR upgraded air compressor hose - Five-storey structure design ( "rubber + steel mesh + rubber + steel mesh + rubber" make this hose ultra-durable and long-lasting. withstands high temps up to 420 F and 720 PSI strength to prevent gas leakage.
- Easy to Install Compatible with Most Air Compressors on the Market. with 3/4 NPT male connectors & 3/4 G Flare fittings(Both Sides) that rotate freely.
- Perfect Size 40 length, 3/4 nominal diameter, 1.14 outer diameter, and 3/4 inner diameter - perfect for your compressor needs.
- Safe and Reliable Protect your equipment and Maximize Your Air Compressor's Performance with this compressor hose - Absorb vibration from the air compressor to the filter regulator or piping system to extend equipment life.
- Reliable After Sale Guarantee we are committed to providing our customers with the best possible service. If you encounter any problems during use, or if you receive any broken or chipped items, just one email, we will for you within 24 hours. You can request a replacement or a full refund. We promise that you will no lose any money or suffer any inconvenience.
- See more on Amazon...
Brand: REEPLAR | Manufacturer: REEPLAR
Dimensions: 1.70 x 17.30 x 12.40 Inches | Weight: 3.20 pounds
See On Amazon #4
000009123 IH9123 33129026 water inlet valve for manitowoc ice machines, 120V 60Hz 5W fits for I, IB, S, SD, JC, QR, SD and K Series ice machines parts
Asin: B0C6D7CWCT | Ean: 0796647731482 | UPC: 796647731482
[ Part No. ] 000009123 Ih9123 000008483 33129026 Man000009123 Del000009123 Manb000009123 Man000008483 Man000000377 Man000000403 Man000007965 Man00007965 Man2405283 Man76-0112-3 Man7601123. Please Verify That The Water Inlet Valve Numbers In This List Fit Your Model By Looking Up Your Model On The Ice Machines Before You Buy. We Are Also Happy To Help You With Your Enquiries And Confirmation..
[ Compatible With ] 000009123 Water Inlet Valve Replacement Is Compatible With Manitowoc Ice Machine Ir0590n Qy0455wp Sr0870c Id0452a S0600c, And Most Other Manitowoc Ice Machines. You Can Search Through Ctrl+F Or Directly Contact Us To Help You Search. Model No..
[ Specifications ] 120V | 60Hz | 5W | Flow 0.78 Gpm (Gallons Per Minute). Each 000009123 Ice Machine Water Inlet Valve Has Passed Strict Quality Inspection Before Leaving The Factory To Perfectly Match Your Ice Maker Model..
Features
- [ Package includes ] 1 pc 000009123 water inlet valve for manitowo ice machine parts.
- [ Specifications ] 120V | 60Hz | 5W | Flow 0.78 GPM (gallons per minute). Each 000009123 ice machine water inlet valve has passed strict quality inspection before leaving the factory to perfectly match your ice maker model.
- [ Part No. ] 000009123 IH9123 000008483 33129026 MAN000009123 DEL000009123 MANB000009123 MAN000008483 MAN000000377 MAN000000403 MAN000007965 MAN00007965 MAN2405283 MAN76-0112-3 MAN7601123. Please verify that the water inlet valve numbers in this list fit your model by looking up your model on the ice machines before you buy. We are also happy to help you with your enquiries and confirmation.
- [ Compatible With ] 000009123 water inlet valve replacement is compatible with manitowoc ice machine IR0590N QY0455WP SR0870C ID0452A S0600C, and most other manitowoc ice machines. You can search through Ctrl+F or directly contact us to help you search. Model No.
- See more on Amazon...
Brand: REEPLAR | Manufacturer: REEPLAR
Dimensions: 3.19 x 3.54 x 2.99 Inches
Warranty: 1 year
See On Amazon #5
REEPLAR 2 in x 20 ft Green PVC Suction Hose, With 1 Male aluminum cam lock fitting, Suction Strainer, for water/trash pump
Asin: B0CP4VH984 | Ean: 0796647788837 | UPC: 796647788837
[ Round Hole Strainer ]: Made Of Carbon Plated Steel, It Is Rust And Corrosion Resistant And Helps Prevent Solids That Damage The Pump From Entering The Pump..
[ Widely Application ]: The Water Pump Suction Hose Kit Can Withstand Full Suction Pressures As Well As A Variety Of Liquid And Solid Materials Such As Air, Water, Sewage, Liquid Fertilizer, Slurry Transfer, Fuel, Chemicals, And High-Pressure Hydraulics..
[ 2" X 20’Green Suction Hose ] The Suction Hose With Male And Female Water Shank Couplings Is Made Of High-Quality Pvc Material Which Can Withstand Full Suction And Discharge Pressures. Purchase With Confidence..
Features
- [ 2 in Water Pump Hose Kit ]: Package includes a 2" x 20' green PVC suction hose, 1 cam and groove adapter, and 1 strainer. Paired with fully functional accessories to meet your various needs.
- [ 2 x 20 Green Suction Hose ] The suction hose with male and female water shank couplings is made of high-quality PVC material which can withstand full suction and discharge pressures. Purchase with confidence.
- [ Round Hole Strainer ]: Made of carbon plated steel, it is rust and corrosion resistant and helps prevent solids that damage the pump from entering the pump.
- [ Widely Application ]: The water pump suction hose kit can withstand full suction pressures as well as a variety of liquid and solid materials such as air, water, sewage, liquid fertilizer, slurry transfer, fuel, chemicals, and high-pressure hydraulics.
- See more on Amazon...
Brand: REEPLAR | Manufacturer: REEPLAR
See On Amazon #6
3587 Standard Magnetic Impeller, 3220 Mcx Standard Bearing Housing, Compatible with Grindmaster Crathco Beverage Machines
Asin: B0CFL76Q1B | Model: 3587 | PartNumber: 3587 | Ean: 0796647509142 | UPC: 796647509142
【Kit Includes】: 3587 Standard Magnetic Impeller, 3220 Mcx Standard Bearing Housing..
【Customer Support】: If For Any Reason You Are Not Completely Satisfied, You Can Ask For A Replacement Or A Full Refund..
【Product Compliance】: We Are Committed To Creating Excellent Products And Satisfying Customers. Our Products Are Made Of High-Quality Materials, Tested Before Leaving The Factory, And Have Reached The Standardization Level Of The Market..
【Applicable Models】: 3587 Standard Magnetic Impeller For Crathco Dispenser Models: D15, D155, D25, D255, D35, D355, Hd, Wd. Crathco Display Drink Dispenser Models: D-25-3, D-25-4, D-35-4..
Features
- Part Number : 3587 Standard Magnetic Impeller, 3220 Mcx Standard Bearing Housing, Compatible with Grindmaster Crathco Drink Machines.
- Applicable Models : 3587 Standard Magnetic Impeller for CRATHCO Dispenser Models: D15, D155, D25, D255, D35, D355, HD, WD. CRATHCO DISPLAY DRINK DISPENSER MODELS: D-25-3, D-25-4, D-35-4.
- kit includes : 3587 Standard Magnetic Impeller, 3220 Mcx Standard Bearing Housing.
- Product Compliance : We are committed to creating excellent products and satisfying customers. Our products are made of high-quality materials, tested before leaving the factory, and have reached the standardization level of the market.
- Customer Support : If for any reason you are not completely satisfied, you can ask for a replacement or a full refund.
- See more on Amazon...
Brand: REEPLAR | Manufacturer: REEPLAR
Dimensions: 0.79 x 1.97 x 1.97 Inches
See On Amazon #7
Condenser Fan Motor 5KCP39EGS070S,1/4 hp, 1100 RPM,208-230V Condenser Fan Motor Replacement Compatible with ac Genteq# G3905,Carrier# 5KCP39EGY823S,HC39GE237,HC39GE237A,236,234A,Dayton# 6DLL0
Asin: B0CC8BYV5Z | Model: 5KCP39EGS070S | PartNumber: 5KCP39EGS070S | Ean: 0796647742297 | UPC: 796647742297
This Replacement Condenser Fan Motor Compatible With Models 5Kcp39egs070s, 5Kcp39egy823s, 5Kcp39fgs071s,Ge 3905, Hc39ge236,Hc39ge237, Hc39ge237a, Hc39ge234a ,Dayton 6Dll0..
Enjoy Cool And Cozy Life, No Annoying Noise.
Oem Standard Quality,Easy To Install And Get The Fan Motor For Ac Unit Working Again..
Condenser Motor Rotation = Ccw Shaft End (Ccwse Or Cwle); Shaft 1/2" X 1.5"; 40° Ambient Temp. Motor Case Length 4"; Stud Pattern 5-1/4" X 5-1/4",Body Diameter 5-5/8"..
Features
- 1/4 hp, 1100 RPM, 1.4 A(amps), 208-230V; 1-Speed, 48 Frame,With overheat protection.
- Condenser Motor Rotation = CCW Shaft End (CCWSE or CWLE); Shaft 1/2 x 1.5; 40 Ambient Temp. Motor case length 4; Stud Pattern 5-1/4 X 5-1/4,Body Diameter 5-5/8.
- This replacement condenser fan motor compatible with models 5KCP39EGS070S, 5KCP39EGY823S, 5KCP39FGS071S,ge 3905, HC39GE236,HC39GE237, HC39GE237A, HC39GE234A ,dayton 6DLL0.
- OEM standard quality,Easy to install and get the fan motor for ac unit working again.
- Enjoy cool and cozy life, No annoying noise
- See more on Amazon...
Brand: REEPLAR | Manufacturer: REEPLAR
Dimensions: 5.70 x 6.70 x 5.70 inches | Weight: 9.04 Pounds
See On Amazon #8
B625 Booster Pump Motor 3/4 HP - fit for Polaris PB4-60 (PB460 PB-460) Booster Pump, for A.O. Smith Century B625, 3/4HP, 3,450 RPM, 115/230V 56CZ Frame. by REEPLAR
Asin: B0CYZDDQTK | Model: B625 Booster Pump Motor | PartNumber: B625 Booster Pump Motor | Ean: 0796647885291 | UPC: 796647885291
[ Perfect Match ] All B625 Booster Pump Motors Are Produced According To Oe Specifications, And The Screw Holes On The Surface Perfectly Match The Size Of The Pump, Allowing For Direct Installation..
[ Easy To Install ] Replace The Motor With A New One, Connect The Wiring Switch On The Cover, And Install It In Place. You Can Restore Your Swimming Pool To Normal Operation..
[ Overload And Short Circuit Protection ] The B625 Motor Is Equipped With Various Safety Protection Functions To Ensure Safety During Use, Which Is Very Suitable For Underground Swimming Pools..
[ High Quality ] Each B625 Motor Is Made Of High-Quality Materials. The Heavy-Duty Shaft Is Made Of 303 Stainless Steel, Which Is More Corrosion-Resistant And Can Withstand The Harsh Environment Commonly Found In Swimming Pools. The Sturdy Motor Housing System Can Further Prevent Corrosion Of The Motor. Each Motor Undergoes Strict Inspection Before Leaving The Factory, So Please Feel Free To Purchase With Confidence..
[ Strong Power | Quiet Operation ] The B625 Motor Is Specifically Designed For Underground Swimming Pools, With A Speed Of 3450 Rpm And A Power Of 3/4 Hp. It Has A Strong Output And Can Provide Sufficient Power To Keep The Pool Water Clean..
[ Compatible With ] B625 3/4 Booster Pump ① Fits For Polaris Vac-Sweep Pb460 (Pb4-60) Pool Pumps. ② Fits For A.O. Smith Century B625. ③ Fits For Arneson Pool Sweep. ④ Fits For Letro Jet Vac Brand Pool Cleaners. ( Note: Not Fit For Hayward Booster Pumps ).
Features
- [ Specifications ] 3/4HP | 115/230V | 3450 RPM | 6.4/12.8 Amps | 1.5 Service Factor | 1 Speed | 56CZ Frame | Thermally Protected : AUTO | PSC, ODP Enclosure Pool Motor.
- [ Compatible with ] B625 3/4 booster pump Fits for Polaris Vac-Sweep PB460 (PB4-60) pool pumps. Fits for A.O. Smith Century B625. Fits for Arneson Pool Sweep. Fits for Letro Jet Vac Brand Pool Cleaners. ( NOTE: Not fit for Hayward booster pumps )
- [ Perfect match ] All B625 booster pump motors are produced according to OE specifications, and the screw holes on the surface perfectly match the size of the pump, allowing for direct installation.
- [ Strong Power | Quiet Operation ] The B625 motor is specifically designed for underground swimming pools, with a speed of 3450 RPM and a power of 3/4 HP. It has a strong output and can provide sufficient power to keep the pool water clean.
- [ Overload and Short Circuit Protection ] The B625 motor is equipped with various safety protection functions to ensure safety during use, which is very suitable for underground swimming pools.
- [ High Quality ] Each B625 motor is made of high-quality materials. The heavy-duty shaft is made of 303 stainless steel, which is more corrosion-resistant and can withstand the harsh environment commonly found in swimming pools. The sturdy motor housing system can further prevent corrosion of the motor. Each motor undergoes strict inspection before leaving the factory, so please feel free to purchase with confidence.
- [ Easy to install ] Replace the motor with a new one, connect the wiring switch on the cover, and install it in place. You can restore your swimming pool to normal operation.
- See more on Amazon...
Brand: REEPLAR | Manufacturer: REEPLAR
Dimensions: 9.00 x 16.00 x 11.20 inches
See On Amazon