NYXOVA - Buying Guide

Bestselling from NYXOVA on Amazon

1. NYXOVA 24pcs Brake Caliper Tool, Heavy Duty Disc Brake Caliper Tool Set, Wind Back Kit for Brake Pad...
2. NYXOVA Macpherson Strut Spring Compressor, 2pcs Heavy Duty Coil Spring Compressor Strut Remover Inst...
3. NYXOVA Battery Terminal and Wiper Arm Puller Remove Tool, Heavy-Duty Windshield Wiper Arm Removal To...
4. NYXOVA Valve Spring Compressor C Clamp Service Kit, Auto Compression C-Clamp Tool Service Kit for AT...
5. NYXOVA 15PCS Oil Filter Cap Wrench Tool, Universal Cup Type Oil Filter Socket Wrench Set, 3/8 inch D...
6. NYXOVA Portable Bubble Wheel Balancer, Heavy Duty Wheel Balancer with Bubble Level, Tire Balancing f...
7. NYXOVA 46pcs Harmonic Balancer Puller Set, Steering Wheel Flywheel Crankshaft Pulley Puller kit with...
8. NYXOVA 2 in 1 Handheld Vacuum Pump Brake Bleeder Kit for Motorcycle, 16 pcs Brake Fluid Bleeder Oil ...
9. NYXOVA Motorcycle Clutch Flywheel Holding Tool, Clutch Hub Basket Gear Holder Tool
10. NYXOVA Rubber Parking Curb, Garage Floor Stops 2 Pack, Heavy Duty Wheel Stop Stoppers Vehicle Parkin...

Features

• Effortless Brake Maintenance: This brake caliper wind back tool kit is designed for easy operation, making brake pad and shoe replacement and piston rotation back into the caliper a breeze. It's a must-have for your car, truck, or 4-wheel drive disc brake vehicle. The kit even includes both right-handed and left-handed thrust bolt assemblies for added convenience.
• Versatile Compatibility: With 18 adapters that fit hundreds of vehicle makes and models, this kit offers universal compatibility. It caters to a wide range of vehicles, including American, European, and Japanese brands. For a more comprehensive list of compatible vehicles, please refer to the Product Description section below.
• Built to Last: Constructed from carbon steel and boasting a rust-proof blasted finish, this tool kit is built to withstand heavy use and accidental drops. It's a reliable choice for everyone, from DIY enthusiasts to professional mechanics, ensuring it can handle the demands of various brake maintenance tasks.
• Organized and Portable: The kit comes with an ABS carrying case that features pre-sized slots for each component, including right and left-handed thrust bolts, two retaining plates, and 18 disc adapters. This organization not only keeps your tools in order but also makes the kit highly portable and easy to transport.
• Package Included: The Piston Compression Sets includes 18 x Disc Adapters (#0, #2, #3, #4, #5, #6, #7, #8, #9, #10, #A, #E, #F, #K, #K1, #K2, #M, #N); 2 x Handed Thrust Bolt Assemblies (Left & Right) ;2 x Retainer Plates (#O, #1) ;2 x Rubber Coated Gloves.
• See more on Amazon...

Features

• Top-Grade Material for Longevity: The Macpherson strut spring compressor features a robust structure with heat-treated forcing hooks and hardened center screws. These components are exceptionally hard, non-bending, and provide maximum strength and service life. This ensures that your tool can withstand heavy-duty use and last for years to come.
• Efficient Design: Our spring removal tool incorporates a heavy-duty threaded rod that offers a large spring contact area, delivering rapid and substantial support force during your operations. The MacPherson strut spring compressor features an adjustable range of 10.5 inches. Furthermore, the built-in stop pin securely locks the coil spring in place, ensuring the safe compression of the spring.
• Compatible with Various Tools: This strut spring compressor tool can be used in conjunction with a 3/4 or 19mm socket and a ratchet. This setup allows you to rotate the spindle, compress the strut spring, and easily remove the fastening nut securing the socket. You can utilize either manual or electric tools to smoothly and permanently compress the spring, whether it's on or off the vehicle.
• Safe and User-Friendly: Using this tool is a straightforward process. All you need to do is apply thread lubricant, securely attach the bracket to the spring, tighten the tool, and then remove the strut. It's designed for one-person operation, offering speed and convenience. Additionally, this package includes a high-quality storage box that helps you keep your tools safely organized.
• Versatile Application: This strut spring compression tool set is suitable for compressing coil springs on McPherson strut assemblies. It's incredibly versatile and can be used for replacing Macpherson struts, shock absorbers, and springs, as well as repairing bent struts, strut tubes, and damaged parts. It's a valuable addition to your toolkit for a wide range of automotive maintenance tasks.
• See more on Amazon...

Features

• Superior Material: This battery terminal and wiper arm puller removal tool is constructed from 45# carbon steel, a robust metal subjected to a specialized heat treatment process. This process enhances its hardness, making it highly durable and resistant to corrosion. The forged and heat-treated steel jaws are designed for extended use, ensuring longevity.
• Optimal Size: With a jaw opening ranging from 1/16 to 1-1/16 (6-28mm) and an outer diameter of 1-7/8 (48mm), this tool is versatile and suitable for various applications.
• User-Friendly Operation: Using this tool is straightforward. Simply tighten the knurled cone to force the jaws under the cable clamp, and then turn the center screw to lift the clamp off the terminal. The puller screw pad is specifically designed to fit the top of the spline post, facilitating easy pulling.
• Multi-Purpose Functionality: This Windshield Wiper Removal Tool isn't limited to battery terminals alone; it can also be employed to remove bolted-on windshield wiper arms that fit over a tapered spline. Its multifunctional design enhances its utility in various automotive tasks.
• Comprehensive Package: The package includes 1 x Wiper Arm and Battery Terminal Bearing Remover Puller Tool, providing you with the necessary tool for these specific applications.
• See more on Amazon...

Features

• Application: The Overhead Valve Spring Compressor Installer Remover Tool serves a dual purpose, allowing you to compress valve springs and safely handle cylinder heads when installing or removing them from most cars, motorcycles, or other small engines. It's a versatile tool that aids in various engine maintenance tasks.
• Wide Usage: This automotive compression C-Clamp tool is suitable for a variety of applications, including motorcycles, ATVs, cars, and small engine vehicles. Its versatility makes it a practical tool for different automotive tasks.
• Package Content:The Valve Spring Compressor C Clamp Service Kit includes a wide C clamp, 3 extension rods of varying lengths (3, 4.4, 4.4), 5 collet adapters in sizes 16mm, 19mm, 23mm, 25mm, 30mm, and a 4 hand lever. Each collet has a length of 1 & 3/4, and the tool has a maximum jaw opening of 9-1/2, ensuring it's suitable for different valve spring sizes and engine configurations.
• Durable Material: The auto compression clamp tool is constructed from forged steel, which imparts high superior strength and hardness. Its surface is finished with oxide to provide corrosion resistance, ensuring its durability and long-lasting performance.
• Easy Storage and Transport: To keep your tools organized and protected, the C clamp service kit comes with a plastic carrying case. This case simplifies transportation, storage, and quick organization, ensuring your tools are readily accessible whenever you need them. The brand stands by the product's quality and offers replacements if you receive an item that appears used.
• See more on Amazon...

Features

• Superior Quality: Our filter wrench set is crafted from robust carbon steel with a durable black finish. It's designed to withstand wear and tear, making it resistant to impacts and aging. With its exceptional longevity and top-notch performance, you won't need to replace these frequently.
• Versatile Compatibility: This set is engineered for use with 3/8 or 1/2 square drive wrenches. The included adapters ensure a secure fit and provide ample torque to prevent slipping and filter damage.
• Wide Range of Applications: Our wrench set is compatible with a diverse array of vehicle oil cartridge filters, including those from renowned brands such as Mazda, Opel, Toyota/Lexus, GM/AC, Champ Lee, Nissan, Honda, Mitsubishi, VW, BMW, Mercedes, Champion Wix, NAP, and more.
• Comprehensive Kit: The package includes 14 socket cups in various sizes (1 x 65mm/14F, 1 x 65/67mm-14F, 1 x 68mm-14F, 1 x 73mm-14F, 1 x 75/77mm-15F, 1 x 76mm-14F, 1 x 76mm-30F, 1 x 74/76mm-15F, 1 x 80mm-15F, 1 x 80/82mm-15F, 1 x 90mm-15F, 1 x 93mm-15F, 1 x 93mm-36F, 1 x 100mm-15F.) and a 1/2In Dr. adaptor. This comprehensive set is designed to cater to a wide variety of vehicle oil cartridge filter applications.
• Effortless Portability and Storage: The set comes in a practical carrying case, ensuring easy transportation, secure storage, and effortless organization. Each compartment within the case, as well as each socket, is labeled and permanently etched with its size for quick and convenient identification.
• See more on Amazon...

Features

• Portable Tire Wheel Balancer: Our tire balancing machine is crafted for precise tire balancing. Its compact and lightweight design enhances portability, allowing you to effortlessly move it between locations.
• Built to Endure: The base of our tire balancer is constructed from robust aluminum alloy, coated with rust-resistant enamel for extended durability and reliability. The four rods and springs are chrome plated and blackened to prevent rust, ensuring a long service life. This hub wheel balancer guarantees smooth and safe operation thanks to its precision engineering.
• User-Friendly Tire Balancer: Easily balance wheels with hub diameters ranging from 1-1/2 to 4. This wheel balancer is ideal for most automobiles and light trucks, making it a breeze to accurately balance tires with the built-in bull's eye level.
• Wide Range of Applications: Our tire balancing machine is well-suited for swiftly and effectively balancing the wheels of the majority of automobiles and light trucks available on the market. It's perfect for DIY enthusiasts, home use, and business applications, making it beginner-friendly.
• Specifications: Tire Changer Balancer Machine dimensions are 24 in height and 11.5 in diameter. The base diameter measures 11.5, the center rod diameter is 0.813, and the hub diameter is 1.495. It weighs approximately 11 lbs, making it a versatile and practical tool for tire balancing.
• See more on Amazon...

Features

• Exceptional Durability: The Steering Wheel Puller Kit is constructed from heat-treated carbon steel, ensuring it possesses maximum strength and resilience. The chrome and black oxide finishes not only add an aesthetic touch but also provide resistance against rust and corrosion.
• Versatile Utility: This harmonic balancer puller kit boasts an array of 30 different bolts and a four-yoke slot design, making it adaptable for a variety of applications. Whether you're working on harmonic balancers, flywheels, crankshafts, steering wheels, pulleys, or other two or three-hole setups, this tool kit has you covered.
• Diverse Bolt Size: The kit includes a wide range of bolt sizes to suit different needs: 3/8-inch bolts in 1-1/2, 2, 4.5, and 6-inch lengths, 5/16-inch bolts in 3, 3.5, and 6-inch lengths, 1/4-inch bolts in 2.5-inch length, M8 x 1.25mm bolts in 45, 65, and 90mm lengths, and M10 x 1.5mm bolts in 35mm length. These bolts ensure you have the right bolt for each specific application.
• Broad Compatibility: The crankshaft pulley puller features a steel yoke with four slots, making it versatile and compatible with a wide range of vehicle configurations. Its adaptability allows you to tackle different types of vehicles with ease.
• Comprehensive Tool Set: The Wheel Balancer Gear Puller Set includes various components to meet your needs. It features a 5-inch long 3/4-inch pressure screw, 30 bolts, a steel yoke, two centering adapters, a flat shaft adapter, different-sized washers, and a carrying case for convenient storage and transportation. This comprehensive tool set ensures you have everything required to get the job done efficiently.
• See more on Amazon...

Features

• Multi-Functional Brake Bleeder Kit: This versatile brake bleeder kit features a vacuum gauge, allowing for precise data readings within a pressure range of 0-30 in Hg or 0-760 mm Hg. It includes components for both brake bleeding and automotive diagnostics. This vacuum pump kit can effectively test and diagnose various parts and common systems in motorcycles, trucks, pickups, or any other vehicle.
• Solo Operation Convenience: Our brake bleeder kit is designed for single-person operation. It efficiently extracts old oil and air while guiding the new oil to fill the entire system. The greatest advantage is that you can easily perform brake bleeding by yourself without needing an assistant.
• Portability Made Easy: The handheld carrying case is constructed from high-quality materials, ensuring durability and robustness. It's suitable for both home and business applications and offers easy transportation and storage(Blue Case).
• Comprehensive Accessories: The hand-held vacuum pump kit comes complete with a hand pump featuring a gauge, a 4.5 oz reservoir jar, 4 transparent hoses, 8 adapters, and a portable case(Blue) to meet all your brake bleeding and diagnostic needs.
• Satisfaction Guaranteed: We take full responsibility for every product we offer. If you encounter any issues with our products or services, please don't hesitate to contact us immediately. We are committed to providing exceptional responses to address all your concerns. Your satisfaction is our priority.
• See more on Amazon...

Features

• Our clutch holding tool is the perfect companion for your clutch hub removal and installation tasks. It allows you to securely hold the inner clutch hub, a crucial step in dealing with the clutch hub and clutch basket.
• This clutch holder tool boasts a smart design with smaller pegs on the back, ideal for shallow applications, and large teeth on the front that provide a dependable grip. Whether your job is deep or shallow, this tool has you covered.
• Featuring 8mm spanner pins on the end and adjustable jaws that can open up to 5 inches wide, this tool is a versatile choice. It's designed to accommodate most clutch hubs with a square-style tooth design for their inner hub.
• Crafted from hardened carbon steel, this clutch holder tool is built to last. Its durability ensures longevity and dependable performance. With this tool, you can confidently prevent the clutch from turning while removing the basket nut, all without risking any damage to the inner clutch hub.
• Beyond its primary role in clutch work, this clutch basket holder tool is a versatile addition to your toolkit. It can also be effectively employed for holding flywheels, changing belts, sprockets, gears, and more. Its applications are limited only by your needs and creativity.
• See more on Amazon...

Features

• Reliable Function: Our rubber curb stops serve as excellent barriers to prevent vehicles from encroaching on parking spaces and colliding with garage walls or other parked vehicles. These garage parking blocks facilitate precise parking in garages, storage spaces, and driveways.
• Superior Quality: Our vehicle parking guide blocks are crafted from premium-quality rubber material, exhibiting robust compression resistance performance. They are built to endure and excel in various challenging conditions, including resistance to ultraviolet rays, moisture, oil, and extreme temperatures.
• Good Visibility: The black rubber wheel stopper is equipped with a prominent yellow reflective safety strip, ensuring excellent visibility, particularly in low-light settings such as nighttime or underground areas. Additionally, we provide you with two extra reflective tapes.
• Effortless Installation: These rubber wheel stops are effortlessly transportable, making installation a breeze, rain or shine, without the need for heavy equipment. The garage car stop indicators can be conveniently stored, removed, or relocated, requiring no special machinery for handling.
• Versatile Application: Each of the wheel stop stoppers measures 20.75x5.75x3.25 in overall dimensions. These rubber wheel stoppers are suitable for both commercial and residential parking lots, shopping malls, and private garages. These rubber parking curbs perform exceptionally well in all weather conditions on asphalt or concrete surfaces.
• See more on Amazon...

Features

• Flywheel Puller Kit: This motorcycle and ATV flywheel puller set is a versatile tool for scooter and ATV repairs. It's designed to safely separate the flywheel from the crankshaft taper and can also be used to remove clutch packs.
• Built to Last: Each flywheel removal tool is constructed from durable steel and features a black oxide coating for maximum strength and longevity. This coating also provides resistance against rust and corrosion. Additionally, each tool is pre-oiled and permanently laser-etched with metric sizing for easy identification.
• Multiple Sizes: This kit includes a variety of puller sizes to accommodate different applications: 5 single-ended pullers ( M14 x P1.5, M16 x P1.5, M18 x P1.5, M19 x P1.0, M28 x P1.5) and 5 double-ended pullers for even more versatility.
• Wide Application: This motorcycle flywheel puller works with most motorcycle brands. Fits Honda, Suzuki, Bosch, Wasaki, Ducati. Yamaha flywheel, and many others or used as small engine flywheel puller on scooters
• Package Contents: The kit includes a comprehensive set of pullers with various sizes to suit different applications, making it a valuable addition to your motorcycle and ATV repair tool kit.
• See more on Amazon...

Features

• Efficiency Oil Pump : This high-performance oil pump boasts an impressive diesel flow rate of 4 liters per minute and an engine oil flow rate of 1 liter per minute at temperatures ranging from 40 to 60 degrees Celsius. Its extended inlet and outlet tubes, measuring 1.2 meters (47.2 inches) and 1.4 meters (55.1 inches) respectively, ensure maximum reach. Operating at 12 volts with a peak current of 7 amps and a maximum power output of 60 watts, this pump is engineered for optimal efficiency.
• Effortless Engine Oil Change: Our DC 12V 80W pump offers robust power, simplifying the oil change process. You can effortlessly initiate oil extraction by attaching the conductive clip to the motor and activating the switch. This streamlines the oil-changing procedure, offering a superior alternative to traditional methods and significantly reducing the associated labor.
• Safety First: Prior to oil extraction, it's essential to ensure the car's engine is heated to a temperature between 104 F and 140 F (40 C-60 C) for approximately 15 minutes. This precautionary measure prevents oil solidification and blockages. Please note that this pump is not intended for use with gasoline or the extraction of water, gearbox oil, or flammable liquids such as fuel or petrol, emphasizing its commitment to safe operation.
• Versatile Oil Extractor: Our oil change pump kit is designed to cater to a wide range of applications, making it compatible with various vehicles and equipment, including cars, boats, jet skis, motorcycles, scooters, marine vessels, quad bikes, trucks, forklifts, generators, tractors, riding mowers, and snow blowers. It serves as a versatile solution for efficiently siphoning and transferring diesel and oil between vehicles, ships, boats, tractors, farm machinery, and industrial equipment.
• Comprehensive Package: Included in the package are essential components for your convenience. You will find 1 pump, 2 outlet hoses, 2 inlet hoses, 4 hose clamps, and 2 battery clamps. This all-inclusive kit ensures you have everything needed for a seamless oil extraction experience.
• See more on Amazon...

Features

• Comprehensive Bearing Press Kit: The bearing press kit is a 10-piece set designed for efficiently and safely installing bearing races and seals without causing any damage to the axle housing. It's a valuable addition to your toolkit for various automotive maintenance tasks.
• Versatile Mechanics Tools: This bearing race and seal driver set includes 9 dual-sided bearing adapters that cater to a wide range of sizes, covering the most commonly needed dimensions for standard races and seals on a variety of vehicles. This versatility makes it a go-to tool for many automotive applications.
• Built for Durability: Crafted from heavy-duty aluminum alloy and featuring a corrosion-resistant coating, this seal installer set is engineered to deliver exceptional strength and unbeatable durability. It can withstand even the most demanding and punishing use, ensuring it stands the test of time.
• User-Friendly Operation: The knurled driver handle offers a non-slip grip for precise control, making your work more comfortable and efficient. Each driver collar is laser-engraved with clearly marked sizes, allowing you to quickly identify and select the right adapter for the job. This simplicity simplifies your tasks and minimizes errors.
• Compact and Portable: To keep your tools organized and readily available, this bearing and seal driver set comes with a convenient storage case. This compact and portable case makes it easy to take your tools with you on the go, ensuring you're always prepared for various maintenance needs.
• See more on Amazon...

Features

• Universal Compatibility: The Universal Overhead Valve Spring Compressor is designed for efficiently removing valve springs without the need to remove the cylinder head. It simplifies tasks like valve spring removal and valve stem seal replacement in various cars, vans, and light trucks.
• Quality Construction: Our valve spring compressor is crafted from high-quality carbon steel, ensuring durability and long-lasting performance. It's equipped with robust bearings capable of withstanding high forces to easily compress springs. Additionally, the tool is coated with zinc and black oxide, providing resistance against rust and corrosion.
• Secure Grip: The overhead valve spring compressor boasts two sets of jaws with different lengths, allowing easy attachment to the valve spring for a secure hold. This feature simplifies the process of attaching the tool to your valve springs for both quick removal and installation. The kit also includes two spring adapters, accommodating valve spring retainers up to 1-13/16 inches in diameter, with a jaw opening ranging from 1-3/8 to 5-5/8 inches and a throat clearance of 5-7/8 inches.
• Stability and Ease of Use: The tool's legs are designed with a built-in offset to compensate for spring wind, ensuring the tool remains vertical and stable during use. To operate, simply loosen the tool to open the jaws by turning the dial adjustment. Then, align the jaw hooks with the spring coils, start tightening the dial adjustment to compress the spring, and remove the keepers. Releasing the valve compressor allows for easy removal of the spring.
• Versatile Application: This valve spring compressor makes removing valve springs in passenger and light commercial vehicles a breeze. It's compatible with foreign and domestic vehicles, as well as vehicles featuring dual springs and inner and outer springs.
• See more on Amazon...

Features

• Universal Fuel Injection Tester Kit: Our fuel injection pressure tester kit includes a range of adapters, hoses, and fittings, enabling you to connect to various fuel injection systems and perform thorough fuel pressure tests. Make sure to check compatibility before use.
• Precise Pressure Readings: This fuel pressure tester gauge provides accurate readings from 0-140psi (0-10 bar), aiding in the diagnosis of fuel pump performance and pressure consistency.
• Durable Construction: Crafted from high-quality materials, our fuel injection pump pressure tester is designed for repeated use, ensuring it lasts through numerous tests and troubleshooting sessions.
• Convenient and Safe: Our oil pressure tester is designed with your ease of use and safety in mind. The quick-release valve button facilitates effortless single-handed operation for both inflation and deflation, streamlining the testing process. This thoughtful design not only enhances your convenience but also ensures a safer experience, making it an indispensable tool in your toolkit.
• Wide Application: Our comprehensive kit is compatible with most gasoline/gas engine fuel injection pump systems, making it a versatile tool for diagnosing fuel-related issues in cars, trucks, motorcycles, and more (excluding Bosch, CIS Jetronic, and GM TB systems).
• See more on Amazon...

Features

• Versatile 3 Jaw Gear Puller Set: This 3 Jaw Gear Puller is a versatile tool designed for the easy removal of pilot bearings, pump bearings, and bushings. The three 3-jaw gear and bearing pullers can be reversed to efficiently pull parts from either the inside or outside.
• High-Quality Construction: Crafted for durability and longevity, our 3 jaw bearing puller boasts a wear-resistant black oxide finish. The jaws are forged and heat-treated steel for maximum strength. The drive screw is coated with phosphating, ensuring the gear puller's longevity and durability.
• Wide Bearing Range: Our Bearing Puller is suitable for removing all sleeve-type bearings with a diameter ranging from 0.7 to 1-1/2 (18mm-38mm). Its clever structural design allows for a strong pulling force with minimal effort, thanks to the small wrench.
• Built for Long-Term Use: The three-jaw design of this gear puller evenly distributes pressure, preventing damage to the bearings during extraction. Crafted from vanadium, the tool exhibits high hardness, excellent toughness, and exceptional durability.
• Versatile Applications: This Puller Set finds applications in a wide range of scenarios, making it an essential addition to any toolbox. Whether you're working on automotive flywheels, motorcycle wheels, bicycle wheels, pump bearings, generator bearings, or machine bearings, this tool can handle the job with ease.
• See more on Amazon...

Features

• Function:The cylinder head holders are crafted to provide a secure grip on cylinder heads during modifications or maintenance tasks. When engaged in engine cylinder block work, the cylinder block can be securely positioned on the cylinder head bracket, facilitating enhanced cleaning or the repositioning of the cylinder head.
• Professional Engine Head Tool Stand:The car bracket for the cylinder block features an additional component designed for the attachment of broader cylinder heads, thereby optimizing working visibility. This unique design is thoughtfully crafted to ensure ample clearance and heightened visibility during intricate tasks.
• Fit Most Car or SUV Cylinders:Each 9.3 x 2 rod on the cylinder stands is outfitted with an 8.2 tapered mandrel, while robust 0.63 thick pins guarantee steadfast stability, especially when dealing with heavier blocks.
• Easy Operation:Effortless installation is achieved by affixing the conical mandrel of the cylinder frame and securely tightening the fasteners for steadfast fixation. Proper alignment of the bolt holes of the cylinder block with the car's cylinder head bracket completes the setup, enabling seamless commencement of work or cleaning processes.
• Designed for Clearance and Visibility:The cylinder head work stand set stands as an indispensable tool for every car or SUV owner. Its versatility extends to compatibility with a wide array of cylinder types, making it a dependable kit for comprehensive inspections, covering concerns such as cracks and wear.
• See more on Amazon...

Features

• Enhanced Durability: Crafted from high-quality chromium steel, each break tip in this motorcycle chain rivet tool kit is engineered to withstand rigorous use over time. The structural-grade carbon steel construction of the remaining components ensures enduring strength and reliability.
• User-Friendly Design: Featuring a C-frame press, three anvils, five break tips, and a lever, this chain breaker and riveter tool is effortlessly assembled for quick use. The threaded handle offers optimal torque and a secure, non-slip grip, facilitating easy application of force for efficient chain repair.
• Precision Alignment: Equipped with pin guides, this tool enables accurate alignment and smooth operation, ensuring a snug fit for the chain with every use. This precision feature saves time and minimizes the risk of chain damage during repair.
• Versatile Compatibility: Suitable for replacing, repairing, or extending chains on motorcycles, bikes, ATVs, and more, this chain breaker tool kit offers a versatile solution. With three different break tip sizes (2.2 mm, 2.9 mm, and 3.8 mm), it accommodates chain sizes ranging from #35 to #630.
• Comprehensive Package: The chain breaker tool kit includes essential components such as a chain press, handle, lever, anvils, breaking pins (2.2mm, 2.9mm, 3.8mm), rivet pin, spring, press plates, and a convenient carrying case for easy storage and transportation.
• See more on Amazon...

Features

• Effortless Functionality: Our oxygen sensor socket tool set is meticulously designed for compatibility with both ratchets and breaker bars, catering to individuals of all skill levels working on vehicles. The inclusion of a wrench and thread chaser set simplifies the removal and installation of oxygen sensors and hex vacuum switches, offering a time-saving solution for automotive maintenance tasks.
• Premium Craftsmanship: Crafted from high-quality steel through precision forging, our sockets and wrenches exhibit exceptional strength, ensuring reliable performance and durability. The 5-piece oxygen sensor socket set is also engineered to resist rust and corrosion, further extending its service life and value.
• Innovative Design: Featuring a unique side cutout design, our sockets provide convenient access to the oxygen sensor section while safeguarding wires from potential damage. The cut-out and slots allow for easy fitting over wiring harnesses, while the standard 6-point socket design ensures secure removal of oxygen sensors while preserving the integrity of the wiring harness. Additionally, the offset and compact design of the socket offer enhanced leverage, even in tight and challenging spaces.
• Versatile Application: Our automotive oxygen sensor socket removal tool is compatible with oxygen sensors commonly found in modern vehicles, making it an ideal solution for various automotive maintenance tasks. Whether you're removing or installing oxygen sensors or vacuum switches on vehicles with computer-controlled engines, our o2 sensor socket wrench remover set has you covered.
• Comprehensive Package: The oxygen sensor socket removal tool set includes 2 thread chasers (1pc M12 x 1.25mm, 1pc M18 x 1.5mm), 1 oxygen sensor socket (1/2 Drive x 7/8 (22mm) x 50mm long), and 2 vacuum switch sockets (1pc 3/8 Drive x 7/8 (22mm) x 30mm long, 1pc 3/8 Drive x 7/8 (22mm) x 6pt x 80mm long), providing a comprehensive solution for your automotive maintenance needs.
• See more on Amazon...

Features

• Premium Quality: Crafted from high-quality stainless steel, this brake bleeder kit offers exceptional durability and performance. Its comprehensive vacuum pump tester kit is designed to test a wide range of vacuum-operated systems in your vehicle.
• Multifunctional Brake Tools: This pressure vacuum pump and brake bleeder kit serve multiple purposes, making it an essential addition to your automotive toolkit. It's perfect for various automotive testing and diagnostic tasks, including engine testing, vacuum-operated mechanical component checks, fuel system inspections, and ignition system assessments. Moreover, it excels at changing brake and clutch fluid and power steering oil.
• Professional Design: The brake fluid tester is equipped with a vacuum gauge that ensures easy pressure readings. It has a pressure range of 0-40 psi (0 to 3 bar) and a vacuum range of 0-26 inhg (0 to -1 bar). To switch between vacuum and pressure, slide the black collar forward for vacuum and back for pressure. Pump as needed, and then move the collar to release the pressure.
• Complete Vacuum Pump Kit: The package includes a vacuum pump with a precision gauge, hoses, versatile adapters, and a brake fluid reservoir. It provides everything you need for both brake bleeding and automotive diagnosis.
• Easy to Carry and Store: To keep your tools organized and in excellent condition, this vacuum pump tester comes in a heavy-duty, blow-molded case with precisely sized compartments for each piece. This makes storage and transport convenient while extending the life of your tool set.
• See more on Amazon...

Features

• Robust Coil Spring Compressor Tool: Our heavy-duty spring compressor tool for struts and coil springs is engineered to minimize tool flexing, bending, and warping, instilling confidence in mechanics for professional-grade performance. The retractable bracket ensures stable parallel compression, essential for precision work in automotive repairs.
• Built for Endurance: Crafted from #45 carbon steel, our compressor tool delivers exceptional durability. The black oxide finish not only enhances its resistance to corrosion and rust but also lends it a sleek, professional look. The rugged frame design minimizes flexing, bending, and warping, even under high tension, ensuring longevity and reliability. With a robust capacity of up to 2,200 pounds (1000kg), this tool can handle the demands of heavy-duty automotive applications.
• Secure Grip Hooks: Say goodbye to flimsy hooks prone to slippage and safety hazards. Our coil compressor hooks firmly grip springs, thanks to easy-to-use hex nuts that ensure a secure hold, providing peace of mind during use.
• Effortless Operation: Our compressor tool is designed for user-friendly operation. Simply extend the internally threaded rod to its full length and attach the bracket jaws onto the spring. Adjust the safeguard and tighten the locking nut to secure the setup in place. With a hand ratchet or wrench, smoothly and evenly crank the hex socket to compress the spring with ease and precision.
• Universal Compatibility: With a generous jaw capacity ranging from 23 mm to 280 mm, our coil spring compressor tool is versatile and suitable for a wide range of vehicles. Whether it's compact cars, large trucks, or anything in between, our strut spring compressor tool kit is up to the task. It's the go-to solution for mechanics handling compression jobs across various vehicle makes and models, offering unparalleled versatility and reliability.
• See more on Amazon...

Features

• Car Maintenance Made Easy: The 13 Piece Harmonic Balancer Steering Wheel Puller Kit simplifies car maintenance tasks, such as removing harmonic balancers, gear pulleys, steering wheels, and crankshaft pulleys. It's a reliable toolset to have in your arsenal for these common automotive maintenance jobs.
• Even Application for Damage Prevention: With the yoke design that accommodates both 2 and 3-hole applications, you can rest assured that this harmonic balancer puller kit won't cause damage to your car parts. It ensures even pressure on the components, minimizing the risk of any harm during the removal process.
• Durable and Long-Lasting: The bits in the steering wheel puller kit are hardened and tempered, guaranteeing their longevity and strength. These machine-precision tools are engineered to withstand extended and repeated use, making them a dependable choice for your maintenance needs.
• Comprehensive Set: This wheel puller set includes various components: (1) floating swivel, (2) 5/16 by 4-inch (7.9mm x 101mm) bolts, (3) 1/4 by 3-inch (6.3mm x 76mm) bolts, (4) 1/4 by 2-inch (6.3mm x 50mm) bolts, (5) 5/16 by 2-inch (7.9mm x 50mm) bolts. This assortment ensures you have the right tool for different jobs.
• Convenient Durable Case: For efficient identification and organization of harmonic balancer puller parts, this steering wheel puller tool kit comes in a durable plastic case. This case makes it easy to store and transport your tools, ensuring they remain in excellent condition for future use.
• See more on Amazon...

Features

• Upgrade your toolkit with our Master Bushing Tool Set, a deluxe custom driver kit designed to streamline bearing race and seal replacement on your car, truck transmission, axle, and wheel hub during the installation of new bearings and seals.
• Universal Compatibility: Our comprehensive bearing and seal driver set features 50 interchangeable discs, offering an impressive 2,450 different variations. Each of the discs, ranging from 0.7 inches to 2.55 inches in 1mm increments, plus an additional 2.9 inches, can be seamlessly interchanged with one another. Connected with a 0.47-inch shaft and screw, which attaches to a 7.08-inch handle, this set provides complete and efficient wheel bearing driver solutions.
• Heavy Duty and Durability: Crafted from heavy-duty carbon steel and treated with black anodic oxidation for ultimate anti-rust performance, our components are built to withstand heavy use and accidental drops. Whether you're an off-road weekend warrior, a novice, or a professional mechanic, our tool set is designed to meet your needs with unmatched durability.
• Effective Press Kit: Our tool set includes everything you need for fast and effective removal and installation of wheel bearings on your cars or trucks. Replace wheel bearings effortlessly with our multi-size bushing discs and heavy-duty long handle shaft.
• Comes with the Case: Each kit comes equipped with an illustrated parts diagram for easy operation. It includes 50pcs bushing discs, 1pc long handle shaft, and necessary assemblies, all housed in a heavy-duty blow-molded case for convenient storage and transportation of every part.
• See more on Amazon...

Features

• Premium Quality: Crafted from durable stainless steel and aluminum alloy, this Oil Filter Wrenches Socket Set boasts exceptional strength, resistance to rust and oxidation, and can handle heavy-duty use without bending or breaking.
• Versatile Functionality: Designed to grip like a socket, this set reduces the risk of crushing the filter. It includes a socket wrench and ring spanner to help remove jammed filters and caps with ease.
• Essential Tool: Make changing your oil and oil filter a breeze with this comprehensive oil filter cup set. It offers a wide range of sizes to fit various vehicles, and the low-profile socket cap set allows you to access and effortlessly remove oil filters housed in tight spaces.
• Oil Filter Cup Sizes: The set includes a variety of cup sizes, each with a specific diameter and tooth count, making it compatible with numerous filters and caps.
• Complete Package: Included in the package are 21 Oil Filter Cups, a 1/2-inch Drive Ratchet, and a Wrench. This set equips you with everything needed for efficient oil filter maintenance.
• See more on Amazon...

Features

• Exhaust Pipe Stretcher Kit: This automotive muffler pipe spreading tool kit is designed for enlarging mild steel exhaust pipes, ensuring flawless exhaust seals with narrower diameter tubing. The process of expanding your tailpipe not only enhances exhaust volume but also elevates vehicle RPM, delivering added power to your engine. Our exhaust hanger tool effortlessly widens pipes for your convenience.
• Premium Quality: The exhaust pipe expander tool set features collets crafted from aerospace-grade 6061 aluminum, while the expander is constructed from tempered 40CR alloy structural steel. These materials are chosen to guarantee durability, a prolonged service lifespan, and resistance to rust.
• Size: The exhaust pipe stretcher provides a selection of collets that enable a wide expansion range, ranging from 1-5/8 inches to 4-1/4 inches. The exhaust pipe expander kit includes: Steel expander 1 5/8 - 2 Collet, Steel expander 2 - 2 1/2 Collet, 2 3/8- 2 3/4 Collet, 2 3/4 - 3 1/8 Collet, 3 1/8 - 3 1/2 Collet, 3 1/2 - 3 7/8 Collet, 3 7/8 - 4 1/4 Collet.
• Easy Operation: Just select the appropriate collet, apply lubrication to the exhaust expander component, attach any required sleeves, secure the pipe in place, and begin the expansion process. In colder conditions, consider pre-warming the pipe to prevent any damage when using the tube expander. You can further minimize effort by employing a 1/2 or 3/4 impact wrench.
• Easy to Store: This exhaust expander tool kit comprises all the essential tools for expanding exhaust pipes. All components are neatly arranged within a storage box, ensuring swift organization and effortless storage.
• See more on Amazon...

Features

• Durable Construction: The inner tierod removal tool crafted from drop forged and heat-treated materials, this tool is built to withstand heavy-duty use, ensuring exceptional durability and extra strength. It's a robust and long-lasting choice.
• Inner Tie Rod Hex Wrench: Specifically designed for 1/2-inch square drive tools, this wrench simplifies inner tie rod end removal.
• Effortless Operation: Easily remove inner tie rod ends without the need to disassemble the rack and pinion. It's a practical tool for extracting steering rods.
• Versatile Function: This universal inner tie rod hex wrench is ideal for steering rod removal and can effectively replace inner tie rod ends ranging from 27 to 42 mm in diameter without requiring the removal of the rack and pinion.
• Wide Compatibility: Designed to universally fit all types of vehicles, this tie rod end remover tool is compatible with a range of brands including Mercedes, Benz, BMW, Toyota, Honda, Ford, Nissan, and more. It's a versatile and essential tool for your automotive needs.
• See more on Amazon...

Features

• Versatile Bearing Puller Set: Elevate your pulling tasks with the bearing puller set, designed to conquer a wide spectrum of jobs. This set is perfect for efficiently removing bearings of various sizes, whether they're on the front and rear wheel hub axle shafts or components like gears, pulleys, and steering wheels.
• Comprehensive All-in-One Kit: Our bearing separator set is a complete solution, featuring essential components for effective pulling. Included are a 3 bearing separator jaw, a 2 bearing separator jaw, a 6 yoke, a 6-1/4 forcing screw, four 4 extension screws, four 5 extension screws, and two 4-1/2 L-type legs.
• Versatile Usage: With an impressive 5-ton capacity for each of the two bearing splitter jaws, this set is built to withstand rigorous use. Whether you're a seasoned professional or a home mechanic, this set suits your needs and works seamlessly with most vehicles, ATVs, and light trucks.
• Efficient Performance: The knife-like taper feature of the jaws enables easy access behind bearings, ensuring a secure grip on any bearing. This set provides the tools needed to efficiently reach and remove bearings, even in confined spaces.
• Robust Construction: Crafted from heat-treated Cr-V steel with a resilient black oxide finish, this pinion bearing puller set guarantees both corrosion resistance and long-term durability, even when subjected to demanding usage scenarios.
• See more on Amazon...

Features

• Advanced Anti-Theft Protection: Our car boot is meticulously crafted from high-quality heavy-duty steel, fortified with a rust-resistant coating. This formidable trailer boot wheel lock is engineered to withstand various forms of attacks, including prying, sawing, hammering, and even freon attacks. To ensure comprehensive protection, our boot tire claw features a soft PVC coating arm that not only secures your vehicle but also safeguards the wheel's finish.
• Tailored Wheel Lock Clamp: Included in this package is double, precision-engineered parking car tire claw measuring 12 inches in diameter and 28 inches in length. The claw mouth's adjustability, ranging from 3.6 inches to 15.3 inches, ensures compatibility with a wide array of vehicles boasting a tire radius of under 30.7 inches and a tire width of less than 11 inches.
• Effortless Installation: Equipped with two keys, our car boot for tires offers a user-friendly installation process. Simply insert the key, gently push down the keyhole to engage the lock, and when unlocking, ensure the top part of the key aligns with the corner. You can enhance your vehicle's security in less than a minute.
• Enhanced User Comfort: The foam-wrapped handles on this adjustable tire boot lock provide a comfortable and ergonomic grip, ensuring ease of use. Furthermore, a rubber ring encircles the suction cup, while protective rubber padding is affixed inside the anti-theft wheel clamp, effectively shielding your tires from unsightly scratches.
• Versatile Security Solution: Designed to prevent your vehicle from turning or rotating, this wheel lock clamp boasts an easy-to-adjust size, making it compatible with various rims and tires. Whether it's your Trailer, Car, SUV, ATV, or more, this trailer boot will serve as the ultimate guardian. Note: Ensure the tire radius does not exceed 14 inches.
• See more on Amazon...

Features

• Pneumatic Brake Fluid Bleeder Kit: This brake bleeder kit excels at efficiently exchanging brake and clutch fluid by drawing out old fluid and air, and seamlessly guiding fresh oil to fill the entire brake system in motorcycles, cars, trucks, and pickups.
• Built to Last: The pneumatic brake fluid bleeding tool is constructed from corrosion-resistant, high-strength plastic, ensuring it won't develop leaks even after prolonged use. It offers superb airtightness, featuring two barbed hose fittings for a secure connection between the bleed screw fitting and bleed hose.
• Effortless Operation: The oil filler bottle boasts a long screw with a valve, designed to work with a compatible adapter that attaches securely to the brake fluid reservoir. This setup eliminates the need for manual support. As soon as you open the valve, the new oil flows into the reservoir. When the oil level in the reservoir reaches the screw, the flow stops automatically, freeing you from the need to monitor the oil level closely. It's incredibly convenient.
• Comprehensive Brake System Bleeder Kit: The kit includes a 1L waste oil bottle, a 0.8L new oil filler bottle, two metal adapters (American and European styles), four plastic adapters (21-30mm, 24-32mm, 28-37mm, 32-41mm), a 1.8M long transparent hose, a universal black tapered nipple, and operating instructions.
• Wide Range of Applications: This pneumatic vacuum brake and clutch bleeder kit is suitable for use on motorcycles, cars, and trucks. It features a 1/4-inch - 18 NPT air inlet, requires an air supply of 90 to 120 PSI (6-8 bar), and boasts a refill container capacity of approximately 25 ounces (0.75L). The kit also includes various adapter sizes to ensure a precise fit for your specific application.
• See more on Amazon...

Features

• Built to Last: Crafted from forged and heat-treated 45# steel, our ball joint separator tool set offers robust strength and durability. The chrome-plated surfaces shield against corrosion, ensuring extended service life.
• Confident Control: The knurled handles on our pitman arm separators provide a secure grip, offering complete work control without slippage. Safeguarding tool threads enhances longevity and offers comfort for technicians.
• Effortless Operation: Simply attach the desired handle to the fork, remove cotter pins and nuts from tie rods, ball joints, or pitman arm studs. Insert the separator's tines between parts. Strike the separator's end with a hammer or connect an air hammer for separation. Designed for both novices and professionals.
• Versatile Versatility: This ball joint tool kit features five distinct SAE-standard pieces. Interchangeable forks and handles provide adaptability. Perfect for removing SAE standard-size ball joints, tie rods, and pitman arms from a diverse range of cars and light trucks.
• Comprehensive Package: Your purchase includes a range of tools: a tie rod spreader with an 11/16 (17.5mm) wedge opening, a ball joint separator with a 15/16 (23.8mm) jaw opening, a pitman arm wedge with a 1-1/8 (28.6mm) opening, a 7-3/4 (196.9mm) knurled striking handle for conventional hammers, a 6-3/4 (171.5mm) adapter handle for air hammers, and a durable carrying case.
• See more on Amazon...