Kegconnection, LLC - Buying Guide
Last Updated: 05/25/2024
Share on
Bestselling from Kegconnection, LLC on Amazon
- Kegconnection Kegerator Beer Line Cleaning Kit - Easy and Safe to Use Keg Cleaner - with Brew Clean ...
- National Chemicals 31002 BLC Beverage System Cleaner-32 oz (Pack of 2), 2 Count
- Kegconnection Brew Clean - Kegerator Beer Line Cleaning Solution Powder - Easy and Safe to Use - Hom...
- 1/4 Inch Flare White Washer - 25 Pack
- Kegconnection Regulator Washer - Nylon CO2 Tank to Draft Beer Kegerator Regulators Replacement Washe...
- Regulator Gauge, 0-2000, Right Hand Thread, sold by Kegconnection
- Kegconnection, LLC Co2 Wrench-Metal
- Kegconnection, LLC - Stainless Steel Beer Line Connection Kit for 3/16 In ID Hoses
- 4-Way CO2 Air Distributor/Manifold with Integrated Check Valves and MFL Fittings | Perfect for Homeb...
- Kegconnection Kegerator Beer Line Cleaning Kit - Easy and Safe to Use Keg Cleaner - with Brew Clean ...
- Miller High Life Bottle Opener and Cap Catcher Set
- Ball Lock Disconnect Set, MFL, CM Becker 2-Swivel Nuts, 1-5/16 inch Gas, 1-1/4 inch Liquid
- Lid Foot, Feet for Keg Lids, 10 Pack, Cornelius and Firestone
#1
Kegconnection Kegerator Beer Line Cleaning Kit - Easy and Safe to Use Keg Cleaner - with Brew Clean Solution and More
Asin: B00TWMGW9K | Model: COMINHKPR100862 | PartNumber: COMINHKPR100862
Ball Lifter - Lifts The Ball On Your Coupler So The Cleaner Will Flow Through. (You Need This, Many Kits Don't Have It.).
Some Of The Easiest To Follow, Best Written Instructions In The Industry..
Faucet Wrench - Helps Remove Your Faucet And Attach Cleaning Kit To Your System, Brush Allows Deep Cleaning Of Faucets.
Cleaning Bottle With Hose And Special Connector For Easy Cleaning Of Your Liquid Lines.
Features
- 8 oz of Brew Clean line cleaner (enough to do about 20 cleanings)
- Cleaning Bottle with hose and special connector for easy cleaning of your liquid lines
- Ball Lifter - lifts the ball on your coupler so the cleaner will flow through. (you need this, many kits don't have it.)
- Faucet Wrench - helps remove your faucet and attach cleaning kit to your system, Brush allows deep cleaning of Faucets
- Some of the easiest to follow, best written instructions in the industry.
- See more on Amazon...
Brand: Kegconnection, LLC | Manufacturer: Kegconnection
Dimensions: 4.00 x 10.00 x 6.00 inches
See On Amazon #2
Kegconnection Brew Clean - Kegerator Beer Line Cleaning Solution Powder - Easy and Safe to Use - Homebrew Kegs
Asin: B07QS98K6Q
How To Use With Beer Lines: Use Your Kegconnection Kegerator Beer Line Cleaning Kit With This Refill Of Brew Clean To Clean Your Beer Lines. Use One Tablespoon Of Solution Per 26 Ounces Or 3.25 Cups Of Hot Water. Run Half The Watery Solution Through Your Beer Lines Into A Bucket. Dis-Assemble Your Faucets And Place Them In A Bucket With The Solution. Let Everything Soak For About An Hour. Run The Remaining Solution Through Your Lines Followed By Clean Water. (Bucket & Kit Not Included)..
Other Benefits: This Powerful Cleaning Solution Cuts Down On Scrubbing, And Will Not Leave A Film On Your Kegs, Lids, Or Other Home Brewing Equipment. Proudly Made In The Usa..
How To Use With Home Brew Equipment: Use One Tablespoon Of Solution Per 26 Ounces Or 3.25 Cups Of Hot Water (More If Items Are Heavily Soiled Or Stained). Use Hot Tap Water Between 100 And 160 Degrees. Let Each Piece Of Equipment Soak For At Least One Hour For Maximum Cleaning..
How To Use With Kegs: Use At Least Two Tablespoons (More If Kegs Are Stained), And Fill Kegs With Hot Water. Depress Dip Tube Poppets And Allow Tubes To Fill With The Solution. To Soak The Keg Lid, Add Solution And Hot Water To A Bucket With The Pressure Relief Valve Open. We Suggest Adding One Tablespoon Of Solution Per 26 Ounces Or 3.25 Cups Of Hot Water. Water Should Be Between 100 And 160 Degrees. Let Sit For At Least One Hour, Then Rinse With Clean Water. (Bucket Not Included)..
Features
- SAFE TO USE: Brew Clean solution is a safe and easy to use powder solution. It will not cause rust on kegs or home brew equipment, as this formula helps protect metals from corrosion. This cleaning solution works well with stainless Cornelius/Firestone style kegs, other stainless-steel kegs, as well as glass, plastic, and rubber home brew equipment.
- HOW TO USE WITH KEGS: Use at least two tablespoons (more if kegs are stained), and fill kegs with hot water. Depress dip tube poppets and allow tubes to fill with the solution. To soak the keg lid, add solution and hot water to a bucket with the pressure relief valve open. We suggest adding one tablespoon of solution per 26 ounces or 3.25 cups of hot water. Water should be between 100 and 160 degrees. Let sit for at least one hour, then rinse with clean water. (BUCKET NOT INCLUDED).
- HOW TO USE WITH BEER LINES: Use your Kegconnection Kegerator beer line cleaning kit with this refill of Brew Clean to clean your beer lines. Use one tablespoon of solution per 26 ounces or 3.25 cups of hot water. Run half the watery solution through your beer lines into a bucket. Dis-assemble your faucets and place them in a bucket with the solution. Let everything soak for about an hour. Run the remaining solution through your lines followed by clean water. (BUCKET & KIT NOT INCLUDED).
- HOW TO USE WITH HOME BREW EQUIPMENT: Use one tablespoon of solution per 26 ounces or 3.25 cups of hot water (more if items are heavily soiled or stained). Use hot tap water between 100 and 160 degrees. Let each piece of equipment soak for at least one hour for maximum cleaning.
- OTHER BENEFITS: This powerful cleaning solution cuts down on scrubbing, and will not leave a film on your kegs, lids, or other home brewing equipment. Proudly made in the USA.
- See more on Amazon...
Brand: Kegconnection, LLC | Manufacturer: Logic, Inc
Dimensions: 1.50 x 8.00 x 3.75 inches | Weight: 1.00 pounds
See On Amazon #3
1/4 Inch Flare White Washer - 25 Pack
Asin: B01N66KKVI | Model: COMINHKPR130649 | PartNumber: COMINHKPR130649
Protects Against Air Loss And Leaks By Preventing Metal To Metal Contact.
These Washers Are Perfect When Fitting A Swivel Nut Into Mfl Tailpieces As Well As Mfl Disconnects.
Features
- 25 pack of 1/4 inch flared white washers
- These washers are perfect when fitting a swivel nut into MFL tailpieces as well as MFL disconnects
- Protects against air loss and leaks by preventing metal to metal contact
- See more on Amazon...
Brand: Kegconnection, LLC
Dimensions: 0.25 x 3.00 x 2.00 inches
See On Amazon #4
Kegconnection Regulator Washer - Nylon CO2 Tank to Draft Beer Kegerator Regulators Replacement Washers - Stop Leaks for Kegs, Homebrews - Pack of 10
Asin: B07F71422K | Model: 5823772065 | PartNumber: 5823772065
Nylon Replacement Washers - As This Nylon Gasket Fits Most Regulators, It's A Great Parts Replacement To Have In Case Your Co2 Regulator Washer Broke Or Got Lost In Between Beer Line Cleaning Or Maintenance..
Durable And Made To Last - This Kegconnection Regulator Washer Is Made With High-Quality Nylon Material To Make Sure It's Durable And Made To Last For Years, This Keg Washer Will Provide You A Good Seal That Lasts!Tenance..
Air Tight Seal - This Beer Keg Regulator Nylon Washer Secures Air-Tight Seal Between Your Keg Regulator And Co2 Cylinder Tank. This Regulator Washer Prevents Leaks And Air Loss, Making Sure Your Home Brewing Keg Dispenses Properly..
Features
- KEG WASHER - This washer fits most keg regulators for your homebrew or draft beer kegerator and other commercial grade beer regulators that are used by professional installers in bars and restaurants that don't have built-in O-ring.
- AIR TIGHT SEAL - This beer keg regulator nylon washer secures air-tight seal between your keg regulator and CO2 cylinder tank. This regulator washer prevents leaks and air loss, making sure your home brewing keg dispenses properly.
- NYLON REPLACEMENT WASHERS - As this nylon gasket fits most regulators, it's a great parts replacement to have in case your CO2 regulator washer broke or got lost in between beer line cleaning or maintenance.
- DURABLE AND MADE TO LAST - This Kegconnection Regulator Washer is made with high-quality nylon material to make sure it's durable and made to last for years, This keg washer will provide you a good seal that lasts!tenance.
- See more on Amazon...
Brand: Kegconnection, LLC
Dimensions: 0.25 x 0.50 x 0.50 inches
See On Amazon #5
Regulator Gauge, 0-2000, Right Hand Thread, sold by Kegconnection
Asin: B01MYQY8NE | Model: 8541955708 | PartNumber: 8541955708
Right Hand Thread.
Shipping Rate Shown Is For The Continental Us Only..
Regulator 0-2000 Psi Gauge.
Features
- 0 - 2000 PSI gauge
- regulator 0-2000 PSI gauge
- Right hand thread
- Shipping rate shown is for the Continental US ONLY.
- See more on Amazon...
Brand: Kegconnection, LLC
Weight: 0.20 Pounds
See On Amazon #6
Kegconnection, LLC Co2 Wrench-Metal
Asin: B06ZZ81JLH | Model: 7539851403 | PartNumber: 7539851403
Easily Attach To Hose Line Or Valve - This Regulator Wrench Will Hang On The Side Of The Co2 Or Nitrogen Regulator After Tightening So You Can Easily Find The Wrench And Loosen The Regulator To Swap Into A New Tank..
Durable And Made To Last - This Kegconnection Co2 Regulator Metal Wrench Is Made With High-Quality Material To Make Sure It's Durable And Made To Last For Years. This Regulator Wrench Will Provide You A Good And Easy Air-Tight Seal Between Your Regulator And Tanks!.
Simple And Small Handy Tool - This Metal Wrench Is Small Enough To Be Easily Carried Around Or Let Hang Around Your Regulator's Valve. No Need To Go Looking For Your Wrench Every Time You Change Your Co2 Or Nitrogen Regulator Or Tank!.
Universal Wrench - Our Metal Regulator Wrench Has A Universal Design To Fit The Valve Or Hose Of Both Nitrogen And Co2 Cylinder Tanks And Regulators. With This Kegerator Tool, You Won't Need To Get A New Set Of Wrenches To Secure Either Of The Tanks Or Regulators..
Features
- SECURE YOUR REGULATOR - This nitrogen and CO2 regulator wrench is used to easily tighten and loosen the regulator from the tank. This is convenient whenever you need to detach the regulator and replace your empty cylinder tank.
- UNIVERSAL WRENCH - Our metal regulator wrench has a universal design to fit the valve or hose of both nitrogen and CO2 cylinder tanks and regulators. With this kegerator tool, you won't need to get a new set of wrenches to secure either of the tanks or regulators.
- EASILY ATTACH TO HOSE LINE OR VALVE - This regulator wrench will hang on the side of the CO2 or nitrogen regulator after tightening so you can easily find the wrench and loosen the regulator to swap into a new tank.
- SIMPLE AND SMALL HANDY TOOL - This metal wrench is small enough to be easily carried around or let hang around your regulator's valve. No need to go looking for your wrench every time you change your CO2 or nitrogen regulator or tank!
- DURABLE AND MADE TO LAST - This Kegconnection Co2 Regulator Metal Wrench is made with high-quality material to make sure it's durable and made to last for years. This regulator wrench will provide you a good and easy air-tight seal between your regulator and tanks!
- See more on Amazon...
Brand: Kegconnection, LLC | Manufacturer: Kegconnection
Dimensions: 0.65 x 6.75 x 1.75 inches | Weight: 0.00 pounds
See On Amazon #7
4-Way CO2 Air Distributor/Manifold with Integrated Check Valves and MFL Fittings | Perfect for Homebrew Draft Systems & Commercial Kegerators | Includes (4) 5/16 Inch Barbs/Stems & (4) Swivel Nuts
Asin: B078Y2MVMY | Model: 8541955662 | PartNumber: 8541955662
Integrated Check Valves: Each Beer Line Also Has A Check Valve That Stops The Beer From Flowing Backward. This Eliminates The Chance Of Beer Accidentally Flowing From One Keg To Another. Check Valves Also Keep Beer From Backing Up Into Your Co2 Regulator, As Well As From Contaminating Your Gas Lines..
5-Year Warranty: With Your Purchase Comes A 5-Year Warranty On Parts And Labor. We Will Repair Or Replace This Product For The First 5-Years, And In Most Cases Will Extend The Warranty If Need Be. We Pride Ourselves On Offering High-Quality Products That Are Made To Last. Each Manifold Is Assembled In Our Texas Warehouse, And Our Team Also Takes Care Of Any Repairs Or Replacements. Customer Service Is Our #1 Priority. Therefore, Please Contact Us With Any Questions Or Issues..
Double Seal Guarantee: We Use Premium Teflon Tape, Along With Nsf-Approved Tru-Blu Thread Sealant (Not Included). This Guarantees A Superior Seal, While Still Allowing You To Remove Or Reinstall Your Check Valves For Any Reason. Most Competitors Use Superglue, Which Doesn’T Allow You To Disassemble Parts For Cleaning, Repairs, Or Changes..
Independent Shut-Offs: The Independent Shut-Offs Not Only Allow You To Choose Which Keg(S) To Provide Gas To, They Also Give You The Ability To Fix, Clean, Or Swap Out Kegs Without Depressurizing Your Entire Kegging System..
Features
- INCLUDED: Each 4-Way CO2 Air Distributor/Manifold comes with integrated check valves, independent shut-offs, and MFL fittings. We also conveniently include four 5/16 barbs/stems and four swivel nuts, which are standard for gas lines in the beer industry. The four curved white washers are included to ensure there is no metal-to-metal contact, which aids in preventing air loss. As your drafts system grows, this manifold system can grow along with it, by simply removing the 1/4" brass plug.
- INDEPENDENT SHUT-OFFS: The independent shut-offs not only allow you to choose which keg(s) to provide gas to, they also give you the ability to fix, clean, or swap out kegs without depressurizing your entire kegging system.
- INTEGRATED CHECK VALVES: Each beer line also has a check valve that stops the beer from flowing backward. This eliminates the chance of beer accidentally flowing from one keg to another. Check valves also keep beer from backing up into your CO2 Regulator, as well as from contaminating your gas lines.
- DOUBLE SEAL GUARANTEE: We use premium Teflon tape, along with NSF-approved TRU-BLU thread sealant (Not Included). This guarantees a superior seal, while still allowing you to remove or reinstall your check valves for any reason. Most competitors use superglue, which doesn t allow you to disassemble parts for cleaning, repairs, or changes.
- 5-YEAR WARRANTY: With your purchase comes a 5-year warranty on parts and labor. We will repair or replace this product for the first 5-years, and in most cases will extend the warranty if need be. We pride ourselves on offering high-quality products that are made to last. Each manifold is assembled in our Texas warehouse, and our team also takes care of any repairs or replacements. Customer service is our #1 priority. Therefore, please contact us with any questions or issues.
- See more on Amazon...
Brand: Kegconnection, LLC | Manufacturer: Kegconnection
Dimensions: 1.25 x 9.25 x 3.75 Inches | Weight: 1.30 Pounds
See On Amazon #8
Kegconnection Kegerator Beer Line Cleaning Kit - Easy and Safe to Use Keg Cleaner - with Brew Clean Solution and More
Asin: B001LWQ7GW | Model: COMINHKPR00662 | PartNumber: COMINHKPR00662 | Ean: 0887689461472, 0797734447880 | UPC: 797734447880, 887689461472
The Empty Plastic Bottle Is Marked In Both Ounces And Ml. The Metal Faucet Wrench Allows Easy Removal And Replacement Of Your Faucet From A Tower System Or Refrigerator Shank.
Gently Squeeze To Prevent Leakage. Kit Assembled In The Usa..
The German Made Cmbecker Faucet Adapter Is Used To Connect The Cleaning Line Directly To The Tower Or Standard Shank. The Ball Lifter Is Used For Holding The Check Valve Ball On The Beer Coupler (Also Called Tap) Open So Liquid Can Pass Through Beer Coupler (No Need To Remove Like Some Cleaning Kits). The Faucet Brush Helps Clean The Faucet Spout Each Time The Plug/Brush Is Inserted And Removed.
Beer Line Cleaning Kit Includes: A Detailed And Illustrated Instruction Sheet; 8 Ounces Of Brew Clean; 1 Empty Plastic Bottle; 1 Ball Lifter; 1 Cmbecker Faucet Adapter; 1 Metal Faucet Wrench; And A Faucet Brush.
Features
- Brew Clean is a safe and easy powdered cleaner and made in the USA
- Beer Line Cleaning Kit Includes: A detailed and illustrated instruction sheet; 8 ounces of Brew Clean; 1 empty plastic bottle; 1 ball lifter; 1 CMBecker faucet adapter; 1 metal faucet wrench; and a faucet brush
- The empty plastic bottle is marked in both ounces and ML. The metal faucet wrench allows easy removal and replacement of your faucet from a tower system or refrigerator shank
- The German made CMBecker faucet adapter is used to connect the cleaning line directly to the tower or standard shank. The Ball Lifter is used for holding the check valve ball on the beer coupler (also called tap) open so liquid can pass through beer coupler (no need to remove like some cleaning kits). The faucet brush helps clean the faucet spout each time the plug/brush is inserted and removed
- Gently Squeeze to prevent leakage. Kit assembled in the USA.
- See more on Amazon...
Brand: Kegconnection, LLC | Manufacturer: Kegconnection
Dimensions: 4.00 x 12.00 x 9.00 inches
See On Amazon #9
Ball Lock Disconnect Set, MFL, CM Becker 2-Swivel Nuts, 1-5/16 inch Gas, 1-1/4 inch Liquid
Asin: B00OGE55CY | Model: 8541955358 | PartNumber: 8541955358
Includes Swivel Nut(2) 1-5/16 Inch Barb/Stem For Gas, 1-1/4 Inch Barb/Stem For Liquid.
Quick And Easy Off/On Action.....
Nsf Approved! Food Grade Plastics..
Made In Germany-Assembled In The Usa.
Features
- CM Becker -High Quality German Product- Disconnects, Ball Lock
- Made in Germany-Assembled in the USA
- Includes swivel nut(2) 1-5/16 inch barb/stem for gas, 1-1/4 inch barb/stem for liquid
- NSF Approved! Food Grade Plastics.
- Quick and Easy OFF/ON action....
- See more on Amazon...
Brand: Kegconnection, LLC | Manufacturer: Kegconnection
Dimensions: 1.25 x 2.50 x 2.50 inches | Weight: 0.25 pounds
See On Amazon #10
Lid Foot, Feet for Keg Lids, 10 Pack, Cornelius and Firestone
Asin: B01ERKMA4M
High Quality, Durable Plastic Like The Original..
Fits A Wide Variety Of Keg Feet.
New Manufacture.
Features
- 10 Pack! lets you completely replace feet on 5 kegs.
- New manufacture
- High quality, durable plastic like the original.
- Fits a wide variety of keg feet
- See more on Amazon...
Brand: Kegconnection, LLC | Manufacturer: Kegconnection
Dimensions: 0.25 x 2.00 x 2.00 inches
See On Amazon #11
Kegconnection, LLC Stainless Steel Beer Faucet Lever - Replacement Piece (1312S)
Asin: B001JSHMGM | Model: COMINHKPR10803 | PartNumber: COMINHKPR10803 | Ean: 0845033047383 | UPC: 845033047383
Not For Perlick Faucets.
Upgrade Your Chrome Lever To Stainless Steel.
Features
- Stainless steel beer faucet lever
- Upgrade your chrome lever to stainless Steel
- Not for Perlick Faucets
- See more on Amazon...
Brand: Kegconnection, LLC | Manufacturer: Fittings Inc
Dimensions: 0.25 x 2.00 x 0.25 inches | Weight: 0.04 pounds
See On Amazon #12
1/4 MFL Tailpiece, Two Pack, Stainless Steel w/flared white washer
Asin: B07VXNZKL6
You Need To Set Up Your Homebrew Disconnects With 1/4Inch Mfl Disconnects And Swivel Nuts..
Includes A White Flared Washer.
White Flare Washer(White) Included To Eliminate Metal To Metal Contact Preventing Air/Co2 Loss.
Features
- 1/4 inch MFL Stainless Steel Tailpiece
- white flare washer(white) included to eliminate metal to metal contact preventing air/co2 loss
- You need to set up your homebrew disconnects with 1/4inch MFL disconnects and swivel nuts.
- includes a white flared washer
- See more on Amazon...
Brand: Kegconnection, LLC
See On Amazon #13
Poppet Valve for Cornelius Ball Lock and Pin Lock Kegs by Kegconnection
Asin: B01K7UJ6G6
Will Not Work On Any Other Brand Of Keg......
Fits Pin Lock And Ball Lock Cornelius Brand Kegs.
Features
- Poppet for Cornelius Spartan and Super Champion Kegs
- Fits Pin Lock and Ball Lock Cornelius Brand Kegs
- Will NOT WORK on any other brand of keg.....
- See more on Amazon...
Brand: Kegconnection, LLC | Manufacturer: Kegconnection
Weight: 0.13 pounds
See On Amazon #14
Stainless Steel Hose Splicer, Size - 1/4
Asin: B00XNA9ZPU
Perfect For Connecting Lines!.
Brand: Kegconnection, LLC | Manufacturer: Fittings Inc
Dimensions: 0.25 x 1.50 x 0.25 inches | Weight: 0.06 pounds
See On Amazon #15
Taprite Dual Gauge CO2 Beer Regulator with MFL Check Valve Bundle
Asin: B00D8M5NZY | Model: COMINHKPR42130 | PartNumber: COMINHKPR42130
This Regulator Has A Shutdown Safety System (Blow Off At 55 To 60 Psi), T 742 Hp Series.
Most Consistently Accurate, And Well-Built Regulator On The Market..
Assembled And Tested In The Usa, Approved For Use By All Major Breweries. (Kegconnection Adds An Additional 1 Year Warranty To Taprite Regulators.).
The 1/4 Inch Barb; 5/16 Inch Barb; And Swivel Nut Allow This Co2 Beer Regulator To Be Used With Different Size Hoses.
Features
- Bundle Includes: Made in the USA Taprite Dual Gauge CO2 Beer Regulator with MFL Check Valve; one 1/4 inch barb; one 5/16 inch barb; one swivel nut; one white washer.
- The 1/4 inch barb; 5/16 inch barb; and swivel nut allow this CO2 beer regulator to be used with different size hoses
- This regulator has a shutdown safety system (blow off at 55 to 60 PSI), T 742 HP Series
- Assembled and tested in the USA, Approved for use by all major breweries. (Kegconnection adds an Additional 1 year warranty to Taprite regulators.)
- Most consistently accurate, and well-built regulator on the market.
- See more on Amazon...
Brand: Kegconnection, LLC | Manufacturer: Taprite
Dimensions: 6.75 x 5.50 x 5.75 inches
See On Amazon #16
Pin Lock Keg, 5 Gallon
Asin: B01237J134
Free Set Of O-Rings. Cm Becker Pin Lock Disconnects Will Work Great On This Keg..
May Have Little Dings Or Scratches Or Labels But Works Great..
Coke-Cola Style Keg.
Reconditioned Pin Lock Keg.
Features
- Perfect Keg for Beer, Soda, Kombucha Tea, and Cold Brew Coffee.
- Reconditioned Pin Lock Keg
- Free Set of O-Rings. CM Becker Pin Lock Disconnects will work Great on this keg.
- Coke-Cola style keg
- May have little dings or scratches or labels but works great.
- See more on Amazon...
Brand: Kegconnection, LLC | Manufacturer: Cornelius
Dimensions: 8.00 x 22.00 x 8.00 inches | Weight: 11.00 pounds
See On Amazon #17
Gas Dip Tube, In - "Short", Stainless Seel
Asin: B0711HJP8Y | Model: 8541955754 | PartNumber: 8541955754
New Dip Tube O-Ring.
We Would Recommend Drilling Out This Hole (5/16 Inch) And Replacing With This Metal Dip Tube If You Need To Replace The Smaller Firestone Dip Tube..
Features
- standard Dip Tube for In (Gas) on a Cornelius keg.
- We would recommend drilling out this hole (5/16 inch) and replacing with this metal dip tube if you need to replace the smaller Firestone dip tube.
- new dip tube O-ring
- See more on Amazon...
Brand: Kegconnection, LLC | Manufacturer: Kegconnection
Dimensions: 0.25 x 1.50 x 0.25 inches
See On Amazon