Jiawu - Buying Guide
Last Updated: 05/20/2024
Share on
Bestselling from Jiawu on Amazon
- Jiawu Solar Fan, 5W Solar Panel Fan Kit, Solar Powered Fan for Small Chicken Coops, Greenhouses, She...
- 100/65-6.5 Electric Scooter Tires, 10 Inch Electric Scooter Rubber Vacuum Wheel Off Road Thick Tubel...
- Wheel Guard Rim Protecting Trim Ring, 21 Inch Wheel Rim Protectors Guard for Tesla Model Y Performan...
- Oil Dipstick, Oil Level Gauge, High Hardness Flame Retardant Oil Dipstick with Ergonomic Design for ...
- Solar Panel Fan Kit, 100W Waterproof Solar Powered Exhaust Fan IP65 Waterproof, Outdoor Portable Ven...
- Front Armrest Upper Panel for Toyota Vitz 2010-2014, Car Front Door Panel Armrest Cover, Armrest Cov...
- Front License Plate Bracket for Tesla Model 3 2017 2023, Front Bumper License Plate Mounting Bracket...
- Rear Spoiler Fits for Focus MK3 ST 2011-2018, for Focus MK3 ST Line 2016-2018, Stylish Rugged Wear R...
- Jiawu 5 Gallon RV Fresh Water Tank, Water Jug Rectangular Water Container, LLDPE Plastic Hedpack wit...
- Center Dash AC Air Vent Outlet Panel Frame for RAV4 2006-2012, Center Dash Air Vent Radio Bezel Trim...
#1
Jiawu Solar Fan, 5W Solar Panel Fan Kit, Solar Powered Fan for Small Chicken Coops, Greenhouses, Sheds, Pet Houses, Solar Powered Exhaust Fan Solar Panel Board with Ventilation Fan
Asin: B0B38L8S75 | Ean: 7677597449302
Easy To Install: The Solar Panel Exhaust Fan Is Easy To Install, Just Connect The Interface Of The Solar Panel And The Fan And Put It Under The Sun To Use, And The Solar Panels And Fans Need To Be Fixed On A Solid Wall Or Roof. If You Need The Fan To Work At Night, You Can Use The Power Pack, Which Is Easy To Install And Use..
Wide Applications: Solar Powered Fan Ventilator Suitable For Kitchens, Greenhouses, Pet Houses, Chicken Houses, Barns, Cowsheds, Stables, Tree Houses, Etc., Widely Applied For Place Required Cooling And Exhaustion, Which Reduces The Indoor Temperature And Keeps The Air Fresh..
Quality Material: Outdoor Solar Panel, Using Monocrystalline Silicon Materials, Effectively Convert Sunlight Into Electricity. Solar Panel Size: Approx. 145X145mm / 5.7X5.7In,Fan Size: Approx. 120X120x25mm / 4.7X4.7X1.0In..
How To Use: When Connected To A Solar Panel, The Fan Can Run Without Using A Rechargeable Battery. Sunlight Generates Hot Air, And The Fan Rotates Immediately To Dissipate Heat In Time And Provide Ventilation..
Features
- COOL AND : The 5W solar panel fan kit can push the heat air out and push the cool air in, which effectively reduces the indoor temperature and keeps the air fresh.
- HOW TO USE: When connected to a solar panel, the fan can run without using a rechargeable battery. Sunlight generates hot air, and the fan rotates immediately to dissipate heat in time and provide ventilation.
- EASY TO INSTALL: The solar panel exhaust fan is easy to install, just connect the interface of the solar panel and the fan and put it under the sun to use, and the solar panels and fans need to be fixed on a solid wall or roof. If you need the fan to work at night, you can use the power pack, which is easy to install and use.
- QUALITY MATERIAL: Outdoor solar panel, using monocrystalline silicon materials, effectively convert sunlight into electricity. Solar Panel Size: Approx. 145x145mm / 5.7x5.7in,Fan Size: Approx. 120x120x25mm / 4.7x4.7x1.0in.
- WIDE APPLICATIONS: Solar powered fan ventilator suitable for kitchens, greenhouses, pet houses, chicken houses, barns, cowsheds, stables, tree houses, etc., widely applied for place required cooling and exhaustion, which reduces the indoor temperature and keeps the air fresh.
- See more on Amazon...
Brand: Jiawu
Weight: 0.62 pounds
See On Amazon #2
100/65-6.5 Electric Scooter Tires, 10 Inch Electric Scooter Rubber Vacuum Wheel Off Road Thick Tubeless Tyre Replacement for Electric Scooter Snowfield, Non-Slip Spare Wheels for Scooter
Asin: B0CC9KHYSL | Model: Jiawuy16co045gf | PartNumber: Jiawuy16co045gf
【Tubeless Vacuum Tire】The Vacuum Tire Does Not Need An Inner Tube, Can Prevent The Tire From Cracking, Ensure Smoother Driving..
【After Sale Service】If You Have Any Questions About The Scooter Vacuum Tire Before Purchase Or During The Use, Please Feel To Contact Us, We Offer 24-Hour Customer Service, Your Satisfaction Is Our Primary Goal!.
【Easy To Replace】This 100/65‑6.5 Tyre Off Road Is Great For Replacing Your Worn Or Old Tire, Easy To Replace And Install. And It Is Wear Resistant, Anti And Durable..
【Special Pattern】Wear Resistance And Anti Skid Pattern Is Conducive To Cutting Off Water Film And Air Flow, Improve Driving Performance Of The Wetland, Can Drive In Snowy And Rainy Days With Confidence, Safe And Reliable..
Features
- THICK RUBBER SCOOTER TIRES This Non Slip Electric Scooter Tire Made of thick damping rubber, this rubber tire not only adds comfort to your riding, but also ensures your safety.
- SPECIAL PATTERN Wear resistance and anti skid pattern is conducive to cutting off water film and air flow, improve driving performance of the wetland, can drive in snowy and rainy days with confidence, safe and reliable.
- TUBELESS VACUUM TIRE The vacuum tire does not need an inner tube, can prevent the tire from cracking, ensure smoother driving.
- EASY TO REPLACE This 100/65 6.5 Tyre Off Road is great for replacing your worn or old tire, easy to replace and install. And it is wear resistant, anti and durable.
- AFTER SALE SERVICE If you have any questions about the scooter vacuum tire before purchase or during the use, please feel to contact us, we offer 24-hour customer service, Your satisfaction is our primary goal!
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #3
Wheel Guard Rim Protecting Trim Ring, 21 Inch Wheel Rim Protectors Guard for Tesla Model Y Performance 2021 to 2023, Wheel Edge Trim, Protects Against Scrapes, Scratches (Matte Black)
Asin: B0CWL8DB7N | Model: Jiawur3uyk02g8x-11 | PartNumber: Jiawur3uyk02g8x-11
Fully Wrapped: The Cool Looking Rim Protection Strip Designed To Protect The Edges Of The Car Rim And Cover Existing Damage. Wheel Rim Protector Is Installed On The Wheel Hub, Covering The Entire Edge Of Hubcap Protrusion, Protection Against Light Scratches And Scuffs Along The Curb And Providing Strong Protection..
Splicing Fasteners Installation: The Hub Rim Edge Protector Adopts Splicing Design, Comes With 24Pcs For Whole Car, And The Single Wheel Is 6Pcs Buckle Splicing And Locking Each Other, Firm, Will Not Fall Off. Wheel Rim Protector For Model Y Can Be Easily Removed If Needed, Allowing You To Change The Look Of Your Wheels Or Clean Them More Thoroughly..
Strong Plastic Materials: Wheel Hubcap Patch Is Made Of Abs Material, High Hardness, High Temperature Resistance, That Resist Damage From Impact, Harsh Weather Conditions And General Wear And Tear. 3 Colors Carbon Pattern Glossy Black/Carbon Pattern Matte Black/Matte Black Optional..
Aesthetic Appeal Design: Model Y Hub Protector 21Inch Adds A Touch Of Style And Sophistication To Your Model Y Exterior. With Their Sleek Design And Clean Lines, Tire Protection Strip Enhance The Overall Aesthetics Of Your Vehicle While Protecting Your Wheels..
Features
- Applicable Model: For tesla wheel protectors are designed specifically for the 21-inch wheels of the Tesla Model Y to ensure a precise and seamless fit. Replacement for Tesla Model Y Performance 2021 to 2023, please confirm whether your model is applicable before buying.
- Aesthetic Appeal Design: Model y hub protector 21inch adds a touch of style and sophistication to your Model Y exterior. With their sleek design and clean lines, tire protection strip enhance the overall aesthetics of your vehicle while protecting your wheels.
- Fully Wrapped: The cool looking rim protection strip designed to protect the edges of the car rim and cover existing damage. Wheel rim protector is installed on the wheel hub, covering the entire edge of hubcap protrusion, protection against light scratches and scuffs along the curb and providing strong protection.
- Strong Plastic Materials: Wheel hubcap patch is made of ABS material, high hardness, high temperature resistance, that resist damage from impact, harsh weather conditions and general wear and tear. 3 Colors Carbon Pattern Glossy Black/Carbon Pattern Matte Black/Matte Black optional.
- Splicing Fasteners Installation: The hub rim edge protector adopts splicing design, comes with 24pcs for whole car, and the single wheel is 6pcs buckle splicing and locking each other, firm, will not fall off. Wheel rim protector for model y can be easily removed if needed, allowing you to change the look of your wheels or clean them more thoroughly.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
Warranty: Manufacturer warranty for 90 day
See On Amazon #4
Oil Dipstick, Oil Level Gauge, High Hardness Flame Retardant Oil Dipstick with Ergonomic Design for Measuring Oil Volume in Engines, Lawn Mowers, Generators, Water Pumps, Easy Operation
Asin: B09Q2F24WT | Ean: 7312515760939
【High Hardness & Flame】The Gasoline Engine Dipstick Is Made Of Excellent Abs Material, High Hardness And Flame Retardant, Can Be Used In Various Environments, Safer Operation And Long Service Life..
【Customer Service】We Have Professional Customer Service Personnel, You Can Contact Us If You Have Any Questions Or Suggestions, And We Will Try Our Best To Solve It..
【Ergonomic & Portable】The Engine Oil Dipstick Has Widened Handle, Easy To Operate And Labor Saving. The Oil Dipstick Is Small And Compact, Can Be Used And Carried At Any Time, And Is Safe To Operate..
【Applicable Machines】The Oil Dipstick Is Suitable For Ey20 Gasoline Engines, Generators, Lawn Mowers, Water Pumps, Etc..
Features
- MAIN PURPOSE The oil dipstick is mainly used to detect the level of the engine oil level and keep the machine running well.
- APPLICABLE MACHINES The oil dipstick is suitable for EY20 gasoline engines, generators, lawn mowers, water pumps, etc.
- HIGH HARDNESS & FLAME The gasoline engine dipstick is made of excellent ABS material, high hardness and flame retardant, can be used in various environments, safer operation and long service life.
- ERGONOMIC & PORTABLE The engine oil dipstick has widened handle, easy to operate and labor saving. The oil dipstick is small and compact, can be used and carried at any time, and is safe to operate.
- CUSTOMER SERVICE We have professional customer service personnel, you can contact us if you have any questions or suggestions, and we will try our best to solve it.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #5
Solar Panel Fan Kit, 100W Waterproof Solar Powered Exhaust Fan IP65 Waterproof, Outdoor Portable Ventilator Attic Fan Quietly Cools for Chicken Coops, Greenhouses, Sheds, Pet Houses
Asin: B09YDNTWTB | Ean: 7731777860759
✅【Safety Protection】The Solar Exhaust Fan Is Equipped With A Metal Protection Net To Prevent Small Animals From Being Injured And To Protect The Normal Operation Of The Fan Blades..
✅【Cost-Saving & Affordable】The Solar Fan System Cools Your Roof And Also Reduces The Load On Your Air Conditioning System, It Will Cut Your Cooling Costs With Low Electric Power Expense. Vent Fan Is Really Practical And Useful. Easily Installation. No Other Tool Required!.
✅【Note】The Speed Of The Fan Is Greatly Affected By Sunlight. When The Sun Shines Directly On The Solar Panel, The Fan Can Reach 3000 Rpm . When The Sunlight Is Weak, The Fan Will Work Slowly Or Even Stop Working.There Is No Built-In Battery In The Solar Fan,Only Work During The Daytime..
✅【Weatherproof Design】The Motor Part Of Solar Powered Fan (Pcb Board/Wiring/Bearing) Has Been Coated To Prevent Rain From Causing Short Circuit Or Damage .The Waterproof Level Can Reach Ip65, Which Is Suitable For Outdoor Environment Use..
Features
- COOL AND This is an excellent solution for Small Chicken Coops, Greenhouses, Sheds,Pet houses, Window Exhaust in the hot summer .The 100W Solar Panel Fan Kit can push the heat air out and push the cool air in,which effectively reduces the indoor temperature and keeps the air fresh.
- WEATHERPROOF DESIGN The motor part of solar powered fan (PCB board/wiring/bearing) has been coated to prevent rain from causing short circuit or damage .The waterproof level can reach IP65, which is suitable for outdoor environment use.
- SAFETY PROTECTION The solar exhaust fan is equipped with a metal protection net to prevent small animals from being injured and to protect the normal operation of the fan blades.
- NOTE The speed of the fan is greatly affected by sunlight. When the sun shines directly on the solar panel, the fan can reach 3000 RPM . When the sunlight is weak, the fan will work slowly or even stop working.There is no built-in battery in the solar fan,Only work during the daytime.
- COST-SAVING & AFFORDABLE The solar fan system cools your roof and also reduces the load on your air conditioning system, it will cut your cooling costs with low electric power expense. Vent fan is really practical and useful. Easily installation. No other tool required!
- See more on Amazon...
Brand: Jiawu
Dimensions: 1.57 x 11.80 x 12.20 Inches
See On Amazon #6
Front Armrest Upper Panel for Toyota Vitz 2010-2014, Car Front Door Panel Armrest Cover, Armrest Cover Trim Replacement, Car Interior Accessories, Easy Installation (Right)
Asin: B0CQ7F3K5D | Model: Jiawuxvc6fnbty2-12 | PartNumber: Jiawuxvc6fnbty2-12
【Stylish Look】The Front Armrest Upper Panel Trim Has Stylish And Elegant Design Style, Can Enhance The Overall Look And Feel Of The Vehicle Interior, Adding A Refined Style To Your Car..
【Easy To Install】The Front Armrest Upper Cover Trim Has A Simple Installation, Convenient And Time Saving, Don't Need Too Much Tools Or Complicated Steps..
【Premium Quality】The Front Armrest Upper Panel Cover Trim Is Made Of Durable And Reliable Material, High Strength And Wear Resistant, Having Long Service Time. Replacing Damaged Trims Can Perfectly Match Your Original Car..
【Comfortable Touch】The Front Armrest Upper Panel Cover Hassurface Polishing, Providing A Comfortable Grip, Even During Extended Use..
Features
- Applicable Model The front armrest upper panel is replacement for Toyota Vitz 2010 to 2014. Please confirm whether it is consistent with the product you want before buying to avoid unnecessary return. (Right: 74231-52630-C0)
- Comfortable Touch The front armrest upper panel cover hassurface polishing, providing a comfortable grip, even during extended use.
- Stylish Look The front armrest upper panel trim has stylish and elegant design style, can enhance the overall look and feel of the vehicle interior, adding a refined style to your car.
- Premium Quality The front armrest upper panel cover trim is made of durable and reliable material, high strength and wear resistant, having long service time. Replacing damaged trims can perfectly match your original car.
- Easy to Install The front armrest upper cover trim has a simple installation, convenient and time saving, don't need too much tools or complicated steps.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #7
Front License Plate Bracket for Tesla Model 3 2017 2023, Front Bumper License Plate Mounting Bracket Holder, Car License Plate Cover Replacement, Car Tag Frame Mount Accessories
Asin: B0C9TZ7YRF | Model: Jiawuf4g6pnse2z | PartNumber: Jiawuf4g6pnse2z
【Protect Plate】Front License Plate Frame Can Protect Your License Plate From Dents And Bending, Also Prevent The License Plate From Scratching The Car Surface..
【Fine Workmanship】Professional Manufactured, Exquisite Workmanship With Unique Design, Ensure Stable Performance And High Reliability..
【Ideal Replacement】Direct Replacement Installation, Meets Or Exceeds Oem Standards For The Replacement Of Old And Damaged One..
【Durable Structure】Made Of High Strength Material, Designed With Solid Structure, Which Is Hard Wearing, Impact Proof And Durable In Use..
Features
- Perfect Fit The front bumper license plate bracket is a replacement for Tesla Model 3 2017 to 2023, please check the model and year before ordering. The referencing OE number of this license plate mount frame is 1096829 00 G, which is molded and designed depend on the original data.
- Durable Structure Made of high strength material, designed with solid structure, which is hard wearing, impact proof and durable in use.
- Protect Plate Front license plate frame can protect your license plate from dents and bending, also prevent the license plate from scratching the car surface.
- Ideal Replacement Direct replacement installation, meets or exceeds OEM standards for the replacement of old and damaged one.
- Fine Workmanship Professional manufactured, exquisite workmanship with unique design, ensure stable performance and high reliability.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #8
Rear Spoiler Fits for Focus MK3 ST 2011-2018, for Focus MK3 ST Line 2016-2018, Stylish Rugged Wear Resistant ABS Rear Trunk Spoiler Wing, Trunk Roof Lip Spoiler (Glossy Black)
Asin: B0CZM2H7Y6 | Model: Jiawurygk2nf6d7-11 | PartNumber: Jiawurygk2nf6d7-11
Enhance Handling Stability: The Tail Spoiler Can Improve The Handling Performance And Stability Of The Vehicle By Increasing The Downforce..
Easy Installation: The Rear Spoiler Trunk Spoiler Wing With Adhesive Tape Is Easy To Install, Saving Time And Money On Installation Costs..
Stylish Design: The Trunk Roof Lip Spoiler Tail Wing Features A Stylish Design That Will Dramatically Improve The Sporty Look Of Your Car And Increase The Safety Of Your Car When Cornering..
Reduce Wind Resistance: The Roof Spoiler Can Effectively Improve Aerodynamic Performance, Reduce Wind Resistance, And Improve Vehicle Driving Stability..
Features
- Applicable : Rear trunk roof lip spoiler is fit for Focus MK3 ST and for Focus MK3 ST Line. Please confirm whether your model is applicable before buying.
- Reduce Wind Resistance: The roof spoiler can effectively improve aerodynamic performance, reduce wind resistance, and improve vehicle driving stability.
- Enhance Handling Stability: The tail spoiler can improve the handling performance and stability of the vehicle by increasing the downforce.
- Stylish Design: The trunk roof lip spoiler tail wing features a stylish design that will dramatically improve the sporty look of your car and increase the safety of your car when cornering.
- Easy Installation: The rear spoiler trunk spoiler wing with adhesive tape is easy to install, saving time and money on installation costs.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #9
Jiawu 5 Gallon RV Fresh Water Tank, Water Jug Rectangular Water Container, LLDPE Plastic Hedpack with Sealing Cover, Camper Trailer Emergency Water Holding Tank 15.8 x 9.8 x 7.9 Inch
Asin: B0CZ3TQXJ8 | Model: Jiawug3f5ekwvcs | PartNumber: Jiawug3f5ekwvcs
【No Leakage Water】The 100Mm Large Diameter Water Inlet Is Equipped With A Sealed Cover Of The Outer Cover, Easier And Faster To Fill The Water, And Can Store 5 Gallons Of Drinking Water At A Time. The Whole Rv Water Holding Tank Has No Welding Gap To Ensure The Sealed Performance, Not Easy To Break, Water Leakage Prevention..
【Built To Last】Say Goodbye To Rust With Our Rv Water Tank And Keep Your Water Safe For When You Need It Most. No Matter Where Your Adventures Take You, This Sturdy Camping Water Container Will Keep Providing You With Fresh Water For Years To Come. Upgrade Your Rv Today!.
【Portable Water Container】Water Can Dimensions – 400 X 250 X 200Mm/15.75 X 9.84 X 7.87In. Square Design For Easy Storage And Easy Handling. 5 Gallon Water Jug Suitable For Rv, Trailer, Outdoor Camper, Boat, Yacht Fresh Water Storage, But Also Household Water Storage, Convenient And Practical For Daily Use..
【Impact Resistant Design】The Water Bucket Is Made Of Lldpe Material, And Has The Characteristics Of Shaking And Stamping Resistance, High Tenacity, Heat And Cold Resistance, And Can Be Used In The Environment Of ‑40 To 80 Degrees Celsius, Ensures It Can Withstand The Rigors Of Travel And Provide A Reliable Source Of Fresh Drinking Water During Your Adventures..
Features
- Made for Your RV This long haul water tank is specifically designed for RV and trailer camping. With a capacity to hold 5 gallons of drinking water, our RV freshwater tank will keep you and your family hydrated throughout your travels. And in case of emergencies, it can also serve as a backup water supply, ideal for camping, emergency management, and off-road adventures.
- Impact Resistant Design The water bucket is made of LLDPE material, and has the characteristics of shaking and stamping resistance, high tenacity, heat and cold resistance, and can be used in the environment of 40 to 80 degrees Celsius, ensures it can withstand the rigors of travel and provide a reliable source of fresh drinking water during your adventures.
- No Leakage Water The 100mm large diameter water inlet is equipped with a sealed cover of the outer cover, easier and faster to fill the water, and can store 5 gallons of drinking water at a time. The whole RV water holding tank has no welding gap to ensure the sealed performance, not easy to break, water leakage prevention.
- Portable Water Container Water can dimensions 400 x 250 x 200mm/15.75 x 9.84 x 7.87in. Square design for easy storage and easy handling. 5 Gallon water jug suitable for RV, trailer, outdoor camper, boat, yacht fresh water storage, but also household water storage, convenient and practical for daily use.
- Built To Last Say goodbye to rust with our RV water tank and keep your water safe for when you need it most. No matter where your adventures take you, this sturdy camping water container will keep providing you with fresh water for years to come. Upgrade your RV today!
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #10
Center Dash AC Air Vent Outlet Panel Frame for RAV4 2006-2012, Center Dash Air Vent Radio Bezel Trim, Car Dashboard Air Conditioner Duct Vent Grille Panel, Dash Vent Trim
Asin: B0CHK2YBZX | Model: Jiawu9a273y04xe | PartNumber: Jiawu9a273y04xe
【Durable Material】Made From Abs Materials, Built To Withstand Daily Use And Resist Wear And Tear, Ensuring Long Lasting Performance. With It You Never Have To Worry About Your Car Being Scratched..
【Good Decoration】Transform The Look Of Your Car Dashboard With This Instrument Cluster Panel, Giving It A Sleek And Updated Appearance..
【Function】Direct Replacement Of The Old Or Broken Center A/C Outlet Air Vent Panel, And Prevents The Bonnet From Venting The Surface Of The Wing From Scratches And Dust..
【Oe Number】The Referencing Oe Number Of This Center Dash Air Vent Radio Bezel Trim Is 55412 42060 B1, Molded And Designed Depend On The Original Data..
Features
- Fitment The dashboard air vent cover trim is a replacement for RAV4 2006 to 2012, please check the model and year before ordering.
- Oe Number The referencing OE number of this center dash air vent radio bezel trim is 55412 42060 B1, molded and designed depend on the original data.
- Durable Material Made from ABS materials, built to withstand daily use and resist wear and tear, ensuring long lasting performance. With it you never have to worry about your car being scratched.
- Function Direct replacement of the old or broken center a/c outlet air vent panel, and prevents the bonnet from venting the surface of the wing from scratches and dust.
- Good Decoration Transform the look of your car dashboard with this instrument cluster panel, giving it a sleek and updated appearance.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #11
Rear Trunk Spoiler for MK6 GTI, R Line, 2Pcs Rear Spoiler Lid Wing, AK Style Car Rear Roof Spoiler for MK6, Trunk Tail Spoiler Lip Kit Replacement, Wind Pressure Reduction
Asin: B0CWTZVK61 | Model: Jiawuuewbt5k3yz-11 | PartNumber: Jiawuuewbt5k3yz-11
Accelerating Ability: The Car Tail Spoiler Can Also Improve The Speed And Acceleration Performance Of The Car And Increase The Fun Of Driving..
Structure: Tail Spoiler Wing Is Made Of High Strength Abs Material, Which Has Good Wind Pressure Resistance And Heat Resistance, Long Service Life..
Sporty Style: Rear Wing Spoiler Can Change The Appearance Of The Car, Make The Vehicle Look More Sporty And Fashionable, And Increase The Added Value..
Powerful Function: Spoiler Can Increase The Downforce Of The Car, Improve The Stability And Grip Of The Vehicle, And Increase The Handling Performance..
Features
- Vehicle Fitment: Rear trunk spoiler is only fit for MK6 , not fit for ordinary base , professional and reliable.
- Powerful Function: Spoiler can increase the downforce of the car, improve the stability and grip of the vehicle, and increase the handling performance.
- Accelerating Ability: The car tail spoiler can also improve the speed and acceleration performance of the car and increase the fun of driving.
- Sporty Style: Rear wing spoiler can change the appearance of the car, make the vehicle look more sporty and fashionable, and increase the added value.
- Structure: Tail spoiler wing is made of high strength ABS material, which has good wind pressure resistance and heat resistance, long service life.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
Warranty: Manufacturer warranty for 90 day
See On Amazon #12
Door Sill Protector for Tesla 2021?2024, Carbon Grain Front and Rear Door Car Pedal Kick Protection Strip, Entry Guard Trim Replacement, Door Scuff Plate Edge Guard (Rear)
Asin: B0CZQ21NHX | Model: Jiawuh7xeqgpfus-12 | PartNumber: Jiawuh7xeqgpfus-12
Easy Installation: Specifically Designed Replacement For Tesla , These Door Sill Guards Are Quick And Easy To Install Without Tools, Simply Peel And Stick..
Simple Design: The Simple And Stylish Design Of These Door Sill Guards Enhances The Visual Appeal Replacement For Tesla , Attracting Attention And Admiration From Onlookers..
Applicable Model: Tailored Replacement For Tesla 2021‑2024, Ensuring A Perfect Fit And Optimal Protection For Your Vehicle's Door Sills..
Enhanced Durability: Crafted From Premium Abs Materials, These Door Sill Protectors Offer Durability And Oxidation Resistance For Long Term Use..
Features
- BODY PROTECTION: The pair of car spill protectors effectively car door sills from scratches, wear, and dirt, keeping the body perfect.
- ENHANCED DURABILITY: Crafted from premium ABS materials, these door sill protectors offer durability and oxidation resistance for long term use.
- EASY INSTALLATION: Specifically designed replacement for Tesla , these door sill guards are quick and easy to install without tools, simply peel and stick.
- APPLICABLE MODEL: Tailored replacement for Tesla 2021 2024, ensuring a perfect fit and optimal protection for your vehicle's door sills.
- SIMPLE DESIGN: The simple and stylish design of these door sill guards enhances the visual appeal replacement for Tesla , attracting attention and admiration from onlookers.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #13
Suspension Strut Split Hub Steering Knuckle Spreader, Universal Strut Spreader Tool, Double Ended Design, Improved Performance with Steel Assembly, Easy to Use
Asin: B0CPJP5DCB | Model: Jiawutxqv6re1ku | PartNumber: Jiawutxqv6re1ku
【Premium Quality】Suspension Strut Spreader Tool Is Made Of Premium Steel Material, High Strength And Deformation Resistance, Strong And Durable..
【Wide Application】The Suspension Strut Hub Steering Knuckle Spreader Is Highly Versatile, Can Be Used On A Wide Range Of Vehicles And ..
【Improved Performance】Expertly Designed To Split The Steering Knuckle Hub, Enhancing Your Vehicle's Suspension And Braking Performance..
【Double Ended】The Double Ended Design Allows Suspension Strut Split Spreader To Be Used With The Larger Upper Hub And The Lowerjointed Hub To Be Split, Not Easy To Break..
Features
- Function Used to remove and install suspension struts while leaving the hub on the vehicle, designed to keep the suspension hubs separate and open. This tool is small and fits in tight spaces, thus making your work easier.
- Double Ended The double ended design allows suspension strut split spreader to be used with the larger upper hub and the lowerjointed hub to be split, not easy to break.
- Premium Quality Suspension strut spreader tool is made of premium steel material, high strength and deformation resistance, strong and durable.
- Improved Performance Expertly designed to split the steering knuckle hub, enhancing your vehicle's suspension and braking performance.
- Wide Application The suspension strut hub steering knuckle spreader is highly versatile, can be used on a wide range of vehicles and .
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #14
Jiawu Rear Sprocket, Heavy Duty 36T 420 Chain Size Sprocket Steel 65mm Durable for Dirt Bikes for ATVs for Electro Tricycles
Asin: B09KGZF9X3 | Ean: 7341867818258
Professional Manufacturing, Stable Performance, High Reliability And Convenient Use..
Original Standard, It Can Directly Replace For The Old Or Broken Rear Chain Sprocket..
The 36 Tooth Rear Chain Sprocket Is Suitable For Electro‑Tricycles, Atvs And Dirt Bikes..
The Installation Is Simple And Does Not Require Complicated , Easy To Use..
Made Of High‑Quality Steel, It Has Good Toughness, Durability And Long Service Life..
Features
- Made of high quality steel, it has good toughness, durability and long service life.
- Made of high quality steel, it has good toughness, durability and long service life.
- Professional manufacturing, stable performance, high reliability and convenient use.
- The installation is simple and does not require complicated , easy to use.
- Original standard, it can directly replace for the old or broken rear chain sprocket.
- The 36 tooth rear chain sprocket is suitable for electro tricycles, ATVs and dirt bikes.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #15
4Pcs Roof Rack Grommet Plug Cap for Transit Connect 2012 2022, Dustproof Rear Section Roof Rack Grommet Cover Set
Asin: B0CWHHVW9L | Model: Jiawui0vhcs376k | PartNumber: Jiawui0vhcs376k
Prevents Damage: Their Primary Function Is To Cover The Vacant Holes In Your Roof Rack System, Which Prevents Water, Dust, And Debris From Entering And Causing Potential Damage..
Precise Installation: The Plug Cover Is Designed To Meet Original Equipment Manufacturing Standards, So It Can Be Easily Installed On The Rear Roof Rack, Ensuring Good Connection And Stability..
Aesthetic Appeal: They Also Enhance The Overall Look Of Your Vehicle. By Covering Open Holes, They Provide Aand Finished Appearance To The Roof Rack System..
: Roof Rack Grommet Plug Cap Are Made Of Plastic Materials That Are , And Can Be Used For A Long Time And Withstand Different Weather Conditions..
Features
- Applicable Model: Roof rack grommet plug cap is fit for Transit Connect 2012 2022 , please confirm whether your model is applicable before buying.
- : Roof rack grommet plug cap are made of plastic materials that are , and can be used for a long time and withstand different weather conditions.
- Prevents Damage: Their primary function is to cover the vacant holes in your roof rack system, which prevents water, dust, and debris from entering and causing potential damage.
- Aesthetic Appeal: They also enhance the overall look of your vehicle. By covering open holes, they provide aand finished appearance to the roof rack system.
- Precise Installation: The plug cover is designed to meet original equipment manufacturing standards, so it can be easily installed on the rear roof rack, ensuring good connection and stability.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #16
Golf Cart Forward & Reverse Transmission Shift Cable, Forward and Reverse Shift Cable Assembly for E Z GO 4 Cycle TXT ST 400 MPT 800/1200 Cushman 280C
Asin: B0CFVRCC32 | Model: Jiawu7t2asxyz4k | PartNumber: Jiawu7t2asxyz4k
🚩Applicable Model: The Forward Reverse Shift Cable Is Replacement For 2004 & Up E-Z-Go, E-Z-Go 4-Cycle Txt, E-Z-Go St 400, E-Z-Go Mpt 800/1200, E-Z-Go St Sport Ii, E-Z-Go St Sport 2 + 2, E-Z-Go Cushman 280C, E-Z-Go Clays Ca..
🚩Simple Installation: Factory Oem Replacement, Well Made, Perfect Fit And Very Easy To Install, No Complicated Operation Is Required, Convenient For Using, Save Your Time And Energy..
🚩Replaces Oem Part Numbers: The Part Number For Reference Is 602891, Please Confirm Whether It Is Consistent With The Oe You Need. Professional Manufacturing, High Sensitivity, Stable Performance And High Reliability..
🚩Premium Material: Forward Reverse Cable Is Made Of Premium Metal And Rubber Material, Wear Resistant, High Toughness, Rustproof And Durable. Package Includes 1 Shift Forward Reverse Cable With Nut And Joint. Approximate Measure: 66Inch (Fully Extended)..
Features
- DIRECTLY REPLACE: The Shift Cable tend to wear, fray and broken over time, if your golf cart no longer move in the right direction, you may need to relace a good new transmission shift cable.
- PREMIUM MATERIAL: Forward reverse cable is made of premium metal and rubber material, wear resistant, high toughness, rustproof and durable. Package includes 1 shift forward reverse cable with nut and joint. Approximate measure: 66inch (fully extended).
- APPLICABLE MODEL: The forward reverse shift cable is replacement for 2004 & UP E-Z-GO, E-Z-GO 4-Cycle TXT, E-Z-GO ST 400, E-Z-GO MPT 800/1200, E-Z-GO ST Sport II, E-Z-GO ST Sport 2 + 2, E-Z-GO Cushman 280C, E-Z-GO Clays Ca.
- REPLACES OEM PART NUMBERS: The part number for reference is 602891, please confirm whether it is consistent with the OE you need. Professional manufacturing, high sensitivity, stable performance and high reliability.
- SIMPLE INSTALLATION: Factory OEM replacement, well made, perfect fit and very easy to install, no complicated operation is required, convenient for using, save your time and energy.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #17
Front Headlight Eyebrow, 1Pair Headlight Eyelid Trim Cover, Front Lamp Eye Lid Cover Styling Sticker Decal, Compatible with X5 E70 2008 to 2013 (Carbon Fiber Style)
Asin: B0CQ5FXB43 | Model: Jiawu8nc7eiuzft-12 | PartNumber: Jiawu8nc7eiuzft-12
Material: Using Premium Abs Material, Reliable And In Extreme Weather, Not Easy To Break, Resistant To Daily Wear And Tear..
Easy Installation: The Headlight Eye Lid Cover Has Simple Installation, Use The Double Sided Tape To Paste, No Professional Tools Are Required, Time And Effort Saving..
Effective Protection: Protect The Edge Of Your Headlight From Scratches, Can Effectively Reduce Exterior Impact On The Headlight And Extend The Service Life Of The Headlight..
Decorative Trim: The Headlight Eyelid Uses Baking Paint Process, Bright Color Appearance, Uv Protection, Not Easy To Change Color, Perfect Decoration Of Your Car, Make Your Car More Unique..
Features
- Applicable Model: The headlight eyebrow is for X5 E70 2008 to 2013. Please confirm whether it is consistent with the product you want before buying to avoid unnecessary return.
- Decorative Trim: The headlight eyelid uses baking paint process, bright color appearance, UV protection, not easy to change color, perfect decoration of your car, make your car more unique.
- Material: Using premium ABS material, reliable and in extreme weather, not easy to break, resistant to daily wear and tear.
- Effective Protection: Protect the edge of your headlight from scratches, can effectively reduce exterior impact on the headlight and extend the service life of the headlight.
- Easy Installation: The headlight eye lid cover has simple installation, use the double sided tape to paste, no professional tools are required, time and effort saving.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #18
Rail Mount Ice Scratchers, Spring Style Ice Scratcher 860201140, Replacement for Ski Doo 600 Summit Sport with Spring Design and Easy to Use, Ice Scratchers Kit
Asin: B0CQ3P9455 | Model: Jiawuxd1rbtcy63 | PartNumber: Jiawuxd1rbtcy63
Reduce Snow Accumulation: The Spring Style Ice Scratcher Effectively Reduces The Layer Of Snow Ice And Icing That Builds Up Underneath The Sled. Ice Scratcher Provides Better Traction And Control By Cutting Through The Snow And Preventing It From Building Up In The Middle Of The Track. This Provides A Smoother Ride And Reduces Dangerous Conditions In Inclement Weather And Snow Conditions..
Easy To Use: Rail Ice Scratchers Kit Is Designed To Be Easy To Use, So You Can Use It Easily, Which Is Convenient And Practical For You. Mounting Method: Rail Mounted..
Spring Design: The Rail Mount Ice Scratcher Features A Spring Style Design That Better Adapts To Varying Terrain And Snow And Ice Conditions. The Ice Scratcher's Springs Bend And Rebound On Contact With Obstacles, Softening The Impact And Protecting Your Snowmobile's Floorboards And Pry Bar Guards..
Replaces Part Number: The Part Numbers Of Reference Are 860201728, 860201140, 860201761, Please Confirm Whether It Is Consistent With The Oe You Need..
Features
- APPLICABLE : Spring style ice scratcher is fit for REV G4, REV XM , REV XP chassis Summit , and replacement for Ski Doo 800R Summit Everest P TEK (REV XP).
- REPLACES PART NUMBER: The part numbers of reference are 860201728, 860201140, 860201761, please confirm whether it is consistent with the OE you need.
- REDUCE SNOW ACCUMULATION: The spring style Ice scratcher effectively reduces the layer of snow ice and icing that builds up underneath the sled. Ice scratcher provides better traction and control by cutting through the snow and preventing it from building up in the middle of the track. This provides a smoother ride and reduces dangerous conditions in inclement weather and snow conditions.
- SPRING DESIGN: The rail mount ice scratcher features a spring style design that better adapts to varying terrain and snow and ice conditions. The ice scratcher's springs bend and rebound on contact with obstacles, softening the impact and protecting your snowmobile's floorboards and pry bar guards.
- EASY TO USE: Rail ice scratchers kit is designed to be easy to use, so you can use it easily, which is convenient and practical for you. Mounting Method: Rail mounted.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #19
Car Armrest Console Storage Box, 846641F000Q8 Car Center Console Armrest Box, Pop Up Arm Rest Box Assembly Replacement for Kia Sportage 2005 to 2010, and Comfortable
Asin: B0CW9BLJBD | Model: Jiawutmh6kgo8bx | PartNumber: Jiawutmh6kgo8bx
Oe Number: The Referencing Oe Number Of This Armrest Storage Console Box Are 846641F000q8 , 84664 1F000q8, Which Is Molded And Designed Depend On The Original Data..
Ideal Replacement: Direct Replacement Installation, Meets Or Exceeds Oem Standards For The Replacement Of Old And Damaged One On Original Vehicles..
Convenient: Features A Pop Up Design, Providing A Hidden Storage Space For Small Items Such As Keys, Smartphones, Wallets, Making Your Daily Commute More Organized And Enjoyable..
Premium Material: Made Of Wear Resistant Artificial Leather, And Comfortable To Rest Your Arm On, Gives It A Sleek And Stylish Look, Enhancing The Overall Aesthetic Of Your Car..
Features
- FITMENT: The armrest center console box is a replacement for Kia Sportage 2005 to 2010, please check the model and year of manufacturing before ordering.
- PREMIUM MATERIAL: Made of wear resistant artificial leather, and comfortable to rest your arm on, gives it a sleek and stylish look, enhancing the overall aesthetic of your car.
- OE NUMBER: The referencing OE number of this armrest storage console box are 846641F000Q8 , 84664 1F000Q8, which is molded and designed depend on the original data.
- CONVENIENT: Features a pop up design, providing a hidden storage space for small items such as keys, smartphones, wallets, making your daily commute more organized and enjoyable.
- IDEAL REPLACEMENT: Direct replacement installation, meets or exceeds OEM standards for the replacement of old and damaged one on original vehicles.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #20
Fuel Gas Tank Cap, 44200 04610 Leakproof Fuel Gas Tank Cap Lid Replacement for Suzuki Quadrunner 50 LT50, Stylish Appearance Accessories
Asin: B0CBCFW96V | Model: Jiawu01bwdp2kgq | PartNumber: Jiawu01bwdp2kgq
【Improve Security】: The Fuel Tank Cap Provides A Secure For Your Engine Oil System, Preventing Leaks And Ensuring Proper Lubrication Of Your Engine. Replacement Of Worn Out And Damaged Original Fuel Tank Cap, Better Sealing Performance For Your Car, Effectively Preventing Leaks..
【Vent Hole】: Fuel Tank Cap With An Air Vent Hose,Which Can Supply Air To Your Fuel Tank Without Any Gas Flowing Out. Stylish Appearance Adds A And Stylish Touch To Your Engine Bay, Complementing Your Vehicle's Overall Appearance..
【High Quality Material】: Fuel Gas Tank Cap Lid Is Made Of High Class Abs, Which Is Robust And Wear Resistant, Rust, Oxidation And Deformation Resistant, High Reliability, Stability And Durability, Long Service Life..
【Fit Applicable 】: Fuel Gas Tank Cap Is Replacement For Suzuki Quadrunner 50 Lt50 2X4 1984 To 1987. Please Confirm Whether Your Model Is Applicable Before Buying..
Features
- OE NUMBER : The fuel gas tank cap part numbers of reference are 44200 04610, and 4420004610, please confirm whether it is consistent with the OE you need.
- FIT APPLICABLE : Fuel gas tank cap is replacement for Suzuki Quadrunner 50 LT50 2x4 1984 to 1987. Please confirm whether your model is applicable before buying.
- IMPROVE SECURITY : The fuel tank cap provides a secure for your engine oil system, preventing leaks and ensuring proper lubrication of your engine. Replacement of worn out and damaged original fuel tank cap, better sealing performance for your car, effectively preventing leaks.
- HIGH QUALITY MATERIAL : Fuel gas tank cap lid is made of high class ABS, which is robust and wear resistant, rust, oxidation and deformation resistant, high reliability, stability and durability, long service life.
- VENT HOLE : Fuel tank cap with an air vent hose,which can supply air to your fuel tank without any gas flowing out. Stylish appearance adds a and stylish touch to your engine bay, complementing your vehicle's overall appearance.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #21
Suction Cup Phone Holder for Car with Adjustable Arm, Low Profile Dashboard Phone Mount, Compact Windshield Window Dash Mobile Stand Cell Phone Holder Compatible w/All Cell Phones
Asin: B0B3YCLSXD | Model: Jiawu0hTTC | PartNumber: Jiawu0hTTC | Ean: 7845103744887
【Sleek & Thoughtful】Low Profile Design, It Is Sleek And Compact, Blends Well Into Most Car Interiors, No Dazzle. No Magnets, No Sticky Metal Plates Needed, No Interference With Charging Phone, No Interference With Headphone Jack Port, No Interference With Volume Buttons/Power Button..
【Quality Service】We Will Check The Products One By One Before Shipping To Ensure That You Receive Good Phone Holder. In Case Any Broken Problem Happens, You Can Return And Get Refunded With No Reason. You Have No Risk To Try..
【Flexible & Adjustable】Flexible Ball Head Joint & Adjustable Arm For Your Perfect Viewing Angle And Easy Operation On Your Cell Phone. Enjoy A Hands-Free Road Trip, Spend More Time At The Wheel, And Eyes On The Road..
【Ingenious Design】A Cable Clip On The Back Of The Clamp Will Keep Your Charging Cable In Place For Easy Charging Next Time. The One-Step Lever Will Help You Install The Suction Cup Phone Mount Quickly And Remove It Easily. Designed With Rubber Pads, No Scratch Worry..
Features
- FLEXIBLE & ADJUSTABLE Flexible ball head joint & adjustable arm for your perfect viewing angle and easy operation on your cell phone. Enjoy a Hands-free road trip, spend more time at the wheel, and eyes on the road.
- INGENIOUS DESIGN A cable clip on the back of the clamp will keep your charging cable in place for easy charging next time. The one-step lever will help you install the suction cup phone mount quickly and remove it easily. Designed with rubber pads, no scratch worry.
- SLEEK & THOUGHTFUL Low profile design, it is sleek and compact, blends well into most car interiors, no dazzle. No magnets, No Sticky Metal Plates Needed, No interference with charging phone, No interference with Headphone Jack Port, No interference with Volume Buttons/Power Button.
- FLEXIBLE & ADJUSTABLE Flexible ball head joint & adjustable arm for your perfect viewing angle and easy operation on your cell phone. Enjoy a Hands-free road trip, spend more time at the wheel, and eyes on the road.
- QUALITY SERVICE We will check the products one by one before shipping to ensure that you receive good phone holder. In case any broken problem happens, you can return and get refunded with no reason. You have no risk to try.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #22
Welding Spool, Easy Adjustment Air Cooled Spools Guns Portable Durable ABS Copper for Manufacture(8m)
Asin: B09HQNFX3X | Ean: 7061021040928
Ensures 200A Under 60% Duty Cycle, And The Rated Value Is 200A In Co2 Welding, 180A In Mixed Gases Welding..
Transparent Design Will Keep The Steel Wire Clean, Which Simplifies The Observation To Steel Wire Supply As Well..
The Closed Spool Box Enables Convenient Internal Spool Hub Tension Adjustment, Making The Operation Easier..
For The Manufacturing Of Aluminium Alloy, Trailer, Sign, Car And Ship Maintenance, And Use In High Altitude Areas..
Abs And Copper Materials Have Great Durability For Long Term Use, And The Air Cooled Also Ensures Quick Cooling..
Features
- ABS and copper materials have great durability for long term use, and the air cooled also ensures quick cooling.
- ABS and copper materials have great durability for long term use, and the air cooled also ensures quick cooling.
- Ensures 200A under 60% duty cycle, and the rated value is 200A in CO2 welding, 180A in mixed gases welding.
- For the manufacturing of aluminium alloy, trailer, sign, car and ship maintenance, and use in high altitude areas.
- Transparent design will keep the steel wire clean, which simplifies the observation to steel wire supply as well.
- The closed spool box enables convenient internal spool hub tension adjustment, making the operation easier.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #23
Jiawu Headlight Trim Ring, 51138739351 1 Pair Rectangular Headlamp Retaining Ring, Black Headlight Bezels Cover Trim for Cooper F60 Countryman 2017 to 2021
Asin: B0CXCGPPM4 | Model: Jiawu4zptmnd5hi | PartNumber: Jiawu4zptmnd5hi
Premium Material: This Headlight Trim Ring Bezel Is Made From Premium Materials That Can Withstand Various Weather Conditions, Ensuring Long Lasting Use. It Is Designed To Be Resistant To Fading, Cracking, And Discoloration..
Easy To Install: The Headlight Trim Ring Cover Has A Simple Installation, Convenient And Time Saving, Don't Need Too Much Tools Or Complicated Steps..
Oe Number: The Part Numbers For Reference Are 51138739351 For Left, 51138739352 For Right. Please Confirm Whether It Is Consistent With The Oe You Need To Avoid Wrong Buying And Other Problems..
Applicable Model: The Headlight Trim Ring Is Replacement For Cooper F60 Countryman 2017 To 2021. Please Confirm Whether It Is Consistent With The Product You Want Before Buying To Avoid Unnecessary Return..
Features
- Stylish Look: The black headlamp trim ring has a stylish and sporty look, adding a unique and eye catching style, enhancing the overall aesthetic of your car.
- Applicable Model: The headlight trim ring is replacement for Cooper F60 Countryman 2017 to 2021. Please confirm whether it is consistent with the product you want before buying to avoid unnecessary return.
- Premium Material: This headlight trim ring bezel is made from premium materials that can withstand various weather conditions, ensuring long lasting use. It is designed to be resistant to fading, cracking, and discoloration.
- OE Number: The part numbers for reference are 51138739351 for left, 51138739352 for right. Please confirm whether it is consistent with the OE you need to avoid wrong buying and other problems.
- Easy to Install: The headlight trim ring cover has a simple installation, convenient and time saving, don't need too much tools or complicated steps.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #24
Heat Shield Sleeve Fiberglass Wrap, Heat Insulation Hose Fire Sleeve, Silicone Coated Fire Proof Auto Fuel Line Wire Heat Protection, Heat Shield Protectors Boots for Hose Lines (8AN)
Asin: B0CB9TG3JC | Model: Jiawuz5rh4iamtv-12 | PartNumber: Jiawuz5rh4iamtv-12
【Easy To Install】Our Fiberglass Sleeves Are Specially Woven And Can Be Expanded And Shrunk By Fittings, Cables, Terminals, Etc. Simply Pull The Wires Inside, An Hoses, Cables, Etc..
【Effective Protection】Protect Workers From Burns And Allow Bundled Wires, Hoses And Cables. The Perfect Protective Cover Can Protect Hydraulic Hoses, Pneumatic Lines And Wiring Harnesses..
【Excellent Performance】The Heat Shield Are Widely Used As A Solution To Your Burning Spark Plug Wires And Other Auto Wires Which Create A Lot Of Heat. These Universal Heat Protector Sleeve Can Provide A Good Heat Protection To Spark Plug Wires Especially On Engines With Excessive Exhaust Headers..
【Fire Sleeve】The Heat Hose Fiberglass Wrap Shield Sleeve Is Widely Used To Protect And Bundling Fuel Lines, Hydraulic And Oil Lines From High Temperatures. Ideal For Protecting Hoses, Electrical Wiring, Oil And Fuel Lines From Heat And To Prolong The Life..
Features
- Reliable Material The black heat shield is made of high temperature fiberglass material. It's can reduces radiant heat by up to 60%. The thick material is long enough to protect all kinds of wires as it nears the header or exhaust manifold helping to increase longevity of wire covers.
- Fire Sleeve The heat hose fiberglass wrap shield sleeve is widely used to protect and bundling fuel lines, hydraulic and oil lines from high temperatures. Ideal for protecting hoses, electrical wiring, oil and fuel lines from heat and to prolong the life.
- Easy To Install Our fiberglass sleeves are specially woven and can be expanded and shrunk by fittings, cables, terminals, etc. Simply pull the wires inside, AN hoses, cables, etc.
- Excellent Performance The heat shield are widely used as a solution to your burning spark plug wires and other auto wires which create a lot of heat. These universal heat protector sleeve can provide a good heat protection to spark plug wires especially on engines with excessive exhaust headers.
- Effective Protection Protect workers from burns and allow bundled wires, hoses and cables. The perfect protective cover can protect hydraulic hoses, pneumatic lines and wiring harnesses.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #25
Rear Motorcycle Rack, Motorcycle Rear Luggage Rack, Rear Tail Seat Cargo Extender, Rear Rack Luggage Carrier Support Shelf, Cargo Rack for Hunter 350 2022 to 2024
Asin: B0CXQ19JRS | Model: Jiawubyvp90k54i | PartNumber: Jiawubyvp90k54i
【Luggage Rack Extension】If You Like To Ride With A Dry Bag Or Tail Bag On Your Motorcycle Rather Than A Top Case, This Extra-Long Luggage Rack Is The Perfect Solution For Securing Your Gear. This Luggage Support Shelf Is Great For Carrying Cargo, Duffel Bags And Backpacks..
【Easy To Install】Easy To Install The Luggage Rack For Hunter 350 2022 To 2024. It Attaches At Existing Frame Points On The Motorcycle, Quick Installation And Removal, No Drilling Required. Perfect Replacement For Your Broken Luggage Rack. It's Great For Carrying The Motorcycle Trunk During Outside Or Travelling..
【Safe And Stable Hand Grab】This Luggage Rack Tail Seat Has Hand Grab Rail Area That Also Provides A Stable Hand Grab For Rear Passengers To Improve Driving Safety. Motorcycle Luggage Rack Can Not Only Upgrade The Appearance Of Motorcycles, But Also Economical And Practical..
【Well Performance】This Rear Luggage Rack Assembly Is Made Of A 19Mm Iron Pipe Seamlessly Welded Together. The Surface Is Treated With High Temperature Electrostatic Spray, Enhancing Its And Wear Resistance, Ensures The Rear Luggage Rack Support Shelf Stability And Is Designed To Withstand Intensive Use Over Time..
Features
- Fitment The rear luggage bracket fit for Hunter 350 2022 2023 2024. This is a aftermarket replacement part. The dimensions of the rear luggage carrier is 420x320mm / 16.5x12.6in. Please check whether this item can fit on your motorcycle before purchasing.
- Well Performance This rear luggage rack assembly is made of a 19mm iron pipe seamlessly welded together. The surface is treated with high temperature electrostatic spray, enhancing its and wear resistance, ensures the rear luggage rack support shelf stability and is designed to withstand intensive use over time.
- Luggage Rack Extension If you like to ride with a dry bag or tail bag on your motorcycle rather than a top case, this extra-long luggage rack is the perfect solution for securing your gear. This luggage support shelf is great for carrying cargo, duffel bags and backpacks.
- Safe And Stable Hand Grab This luggage rack tail seat has hand grab rail area that also provides a stable hand grab for rear passengers to improve driving safety. Motorcycle luggage rack can not only upgrade the appearance of motorcycles, but also economical and practical.
- Easy To Install Easy to install the Luggage Rack for Hunter 350 2022 to 2024. It attaches at existing frame points on the motorcycle, quick installation and removal, no drilling required. Perfect replacement for your broken luggage rack. It's great for carrying the motorcycle trunk during outside or travelling.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #26
Automotive Spray Paint Gun Lighting System, Universal Automotive Paint Gun Light, White Warm Light, 3 Gear Adjustable Paint Spray Gun LED Light with Memory Function for Home
Asin: B0C22WDT2P | Model: Jiawuf9gayewt6h | PartNumber: Jiawuf9gayewt6h
【Lights The Tight Places】This Paint Spray Gun Light Can Light Up Lower Sections And Tight Places Better, So You Can Say Goodbye To Poorly Lit Areas In Your Spray Booth Or Diy Garage. It Makes Painting Easier And More Even, As You Don't Have To Worry About Your Body Or Arm Casting A Shadow During Painting..
【Universal Type】The Portable Painting Sprayer Fill Light Is Suitable For Most. This Paint Gun Light Is Applicable For Car And Home Decorating And So..
【Easy Operation】Universal Spray Gun Lighting. The Light Switch Is At The End Of The Battery Barrel, Press The Button To Turn On, Then Press To Turn Off, And So On..
【Memory Function】More Than 3 Seconds Of Power On, This Spray Gun Light Is With Memory Function, The Following Power On To Restore The Default Gear. Makes Your Paint Life And Work Much Easier!.
Features
- Adjustable Brightness This professional automotive spray paint gun light is 3 gear adjustable and 20% (low bright), 40% (medium bright), 100 percent (high bright). Don t have to worry about your body or arm casting a shadow during painting.
- Memory Function More than 3 seconds of power on, this spray gun light is with memory function, the following power on to restore the default gear. Makes your paint life and work much easier!
- Lights The Tight Places This paint spray gun light can light up lower sections and tight places better, so you can say goodbye to poorly lit areas in your spray booth or DIY garage. It makes painting easier and more even, as you don't have to worry about your body or arm casting a shadow during painting.
- Easy Operation Universal spray gun lighting. The light switch is at the end of the battery barrel, press the button to turn on, then press to turn off, and so on.
- Universal Type The portable painting sprayer fill light is suitable for most. This paint gun light is applicable for car and home decorating and so.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #27
Window Seal Weatherstrip, 2 Pcs Car Window Moulding Trim Seal Belt, Windshield Edge Moulding Sealing Strip, Compatible with IS250 IS350 is F, OE 75551 53020, 75552 53020
Asin: B0CXCGTMQZ | Model: Jiawuoxzsh37a2q | PartNumber: Jiawuoxzsh37a2q
Compatibility: The Windshield Moulding Is Specifically Designed For Is250 Is350 Is‑F . It Is Engineered To Meet The Specific Requirements Of These Vehicles, Guaranteeing A Precise Fit And Ensuring Optimal Functionality..
Premium Material Crafted From Abs Materials, The Windshield Moulding Is Wear Resistant, And Offers Long Term Stability And Durability. It Is Designed To Withstand The Test Of Time And Provide Reliable Protection For Your Vehicle..
Oe Number: With The Reference Part Numbers Of 75551‑53020 And 75552‑53020, You Can Ensure A Perfect Fit For Your Car. The Windshield Moulding Is A Direct Replacement For The Original Part..
Protective Function: The Windshield Moulding Not Only Enhances The Aesthetic Appeal But Also Serves As A Protective Barrier For Your Windshield. It Effectively The Glass From Various Environmental Elements, Ensuring Driving Safety..
Features
- Enhances Vehicle Appearance: The windshield moulding adds a touch of sophistication and style to your car. With its design and precise fit, it seamlessly integrates with the vehicle's overall aesthetic, enhancing the visual appeal.
- Protective Function: The windshield moulding not only enhances the aesthetic appeal but also serves as a protective barrier for your windshield. It effectively the glass from various environmental elements, ensuring driving safety.
- Compatibility: The windshield moulding is specifically designed for IS250 IS350 IS F . It is engineered to meet the specific requirements of these vehicles, guaranteeing a precise fit and ensuring optimal functionality.
- OE Number: With the reference part numbers of 75551 53020 and 75552 53020, you can ensure a perfect fit for your car. The windshield moulding is a direct replacement for the original part.
- Premium Material Crafted from ABS materials, the windshield moulding is wear resistant, and offers long term stability and durability. It is designed to withstand the test of time and provide reliable protection for your vehicle.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
Dimensions: 2.36 x 32.68 x 2.76 inches
See On Amazon #28
Grounding Magnet Connector, Large Suction Silicone Insulation Magnetic Ground Clamp for Power Tools for Welder(MWGC1-300F2)
Asin: B09HQVYNSK | Model: Jiawuvqgemdpgb17123-11 | PartNumber: Jiawuvqgemdpgb17123-11 | Ean: 7061020821054
Convenient And Quick To Use, Not Easy To Demagnetize. Easy To Take, No Need To Pull.
Come With Silicone Insulation, No Heat Or Sparks, Very Stable, You Can Use With Confidence.
This Clamp Is Used In The Connection Between Electrical Equipment Or Other Objects And The Ground To Form A Conductive Connection.
The Product Possess Strong Magnetism And Large Suction, Close To The Ground, Very Reliable.
Good Quality Copper Rod With Double Layer Gasket Fixed And Nut Reinforcement, Spring Expansion Bring Closer Connections.
Features
- Good quality copper rod with double layer gasket fixed and nut reinforcement, spring expansion bring closer connections
- Good quality copper rod with double layer gasket fixed and nut reinforcement, spring expansion bring closer connections
- Convenient and quick to use, not easy to demagnetize. Easy to take, no need to pull
- The product possess strong magnetism and large suction, close to the ground, very reliable
- Come with silicone insulation, no heat or sparks, very stable, you can use with confidence
- This clamp is used in the connection between electrical equipment or other objects and the ground to form a conductive connection
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #29
Ignition Switch, 0004620693 Ignition Starter Switch, Metal Ignition Lock Replacement, Compatible with Benz W100 W108 W110 W111 W112 W113 1962 to 1967, Directly Replace
Asin: B0CB5MC252 | Model: Jiawun2q6p0vxzo | PartNumber: Jiawun2q6p0vxzo
Applicable Model: The Ignition Switch Is Replacement For Benz W100 W108 W110 W111 W112 W113 1962 To 1967, Please Check Whether Your Model Is Applicable Before Buying..
Oe Number: The Part Number For Reference Is 0004620693, Please Confirm Whether It Is Consistent With The Oe You Need..
Accurate And Simple: Made According To The Original Car Size, With Superior Performance, Durable, More Professional And Accurate, Simple Structure Is Easy To Install For New User Operation..
Directly Replace: Stringently Manufactured To Meet The Original Standard, Good Replacement For The Old Or Broken One, Improving The Time Efficiency..
Features
- Premium Material: The ignition switch is made of ABS and metal materials, which has great durability, rust resistance and can be used for a long time.
- Directly Replace: Stringently manufactured to meet the original standard, good replacement for the old or broken one, improving the time efficiency.
- Applicable Model: The ignition switch is replacement for Benz W100 W108 W110 W111 W112 W113 1962 to 1967, please check whether your model is applicable before buying.
- Accurate and Simple: Made according to the original car size, with superior performance, durable, more professional and accurate, simple structure is easy to install for new user operation.
- OE Number: The part number for reference is 0004620693, please confirm whether it is consistent with the OE you need.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon #30
Center Dash AC Outlet Air Vent Panel for Toyota Camry XV30 2001 to 2006, Dashboard Bezel Trim Replacement, Car Radio Frame, Air Conditioning Vent Trim Insert Panel
Asin: B0CPT55Z6Y | Model: Jiawu8inmypgh06 | PartNumber: Jiawu8inmypgh06
【Improved Air Circulation】Provide Enhanced Airflow And Distribution Of Cool Or Warm Air Throughout The Vehicle's Cabin, Ensuring A Comfortable And Pleasant Driving Experience..
【Sleek And Modern Design】The Center Dash Air Outlet Panel Adds A Touch Of Sophistication And Modernity To The Interior Of The Vehicle, Enhancing Its Overall Aesthetic Appeal..
【Easy Installation】Directly Replace The Old Or Broken One. Plug And Play..
【High Quality】Made With Plastic, This Air Outlet Panel Is Built To Last, Ensuring Durability And Longevity That Withstands Regular Use And Daily Wear And Tear..
Features
- Applicable Model Center dash air outlet panel is replacement for Toyota Camry XV30 2001 2002 2003 2004 2005 2006, please confirm whether your model is applicable before buying.
- High Quality Made with plastic, this air outlet panel is built to last, ensuring durability and longevity that withstands regular use and daily wear and tear.
- Improved Air Circulation Provide enhanced airflow and distribution of cool or warm air throughout the vehicle's cabin, ensuring a comfortable and pleasant driving experience.
- Easy Installation Directly replace the old or broken one. Plug and Play.
- Sleek and Modern Design The center dash air outlet panel adds a touch of sophistication and modernity to the interior of the vehicle, enhancing its overall aesthetic appeal.
- See more on Amazon...
Brand: Jiawu | Manufacturer: Jiawu
See On Amazon