HiLetgo - Buying Guide
Last Updated: 05/24/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
HiLetgo ESP-WROOM-32 ESP32 ESP-32D Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE
Asin: B0718T232Z | Model: 3-01-1287 | PartNumber: 3-01-1287
Support Lwip Protocol, Freertos.
Esp32 Is A Safe, Reliable, And Scalable To A Variety Of Applications.
Supportthree Modes: Ap, Sta, And Ap+Sta.
Ultra-Low Power Consumption, Works Perfectly With The Arduino Ide.
Features
- 2.4GHz Dual Mode WiFi + Bluetooth Development Board
- Ultra-Low power consumption, works perfectly with the Arduino IDE
- Support LWIP protocol, Freertos
- SupportThree Modes: AP, STA, and AP+STA
- ESP32 is a safe, reliable, and scalable to a variety of applications
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #2
HiLetgo 3pcs ESP32 ESP-32D ESP-WROOM-32 CP2012 USB C 38 Pin WiFi+Bluetooth Dual Core Type-C Interface ESP32-DevKitC-32 Development Board Module STA/AP/STA+AP
Asin: B0CNYK7WT2 | Model: 3-01-1842 | PartNumber: 3-01-1842
Support Many Kinds Of Interfaces Such As Uart/Spi/I2c/Pwm/Dac/Adc..
With 2.4Ghz Wifi+Bluetooth Dual-Mode, Support Sta/Ap/Sta+Ap Mode, Universal At Command, Easy To Use..
Esp32 Integrates Antenna, Switches, Rf Balun, Power Amplifiers, Low Noise Amplifiers, Filters And Power Management Modules..
Features
- ESP32 CP2012 USB C (Type-C) core board, it has 38 pins and more features than a 30-pin module. Narrower width, can be connected to the breadboard very well.
- ESP32 integrates antenna, switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.
- Support many kinds of interfaces such as UART/SPI/I2C/PWM/DAC/ADC.
- With 2.4GHz WiFi+Bluetooth Dual-mode, support STA/AP/STA+AP mode, universal AT command, easy to use.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
HiLetgo CP2102 USB 2.0 to TTL Module Serial Converter Adapter Module USB to TTL Downloader with Jumper Wires
Asin: B00LODGRV8 | Model: 3-01-0103-B | PartNumber: 3-01-0103-B | Ean: 0797698770451 | UPC: 797698770451
Connect Mcu Easily To Your Computer!.
Supports Windows 98Se, 2000, Xp, Vista, Window7, Mac Os 9, Mac Os X & Linux 2.40.
Standard Usb Type A Male And Ttl 5Pin Connector. 5Pins For 3.3V, Rst, Txd, Rxd, Gnd & 5V.
Baud Rates: 300 Bps To 1.5 Mbps.
Features
- Stable and reliable chipset CP2102
- Baud rates: 300 bps to 1.5 Mbps
- Connect MCU easily to your computer!
- Standard USB type A male and TTL 5pin connector. 5pins for 3.3V, RST, TXD, RXD, GND & 5V
- Supports Windows 98SE, 2000, XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 3.10 x 4.30 x 0.60 inches | Weight: 0.02 Pounds
See On Amazon #4
HiLetgo 3pcs Nano 3.0 ATmega328P Type-C USB CH340 Controller Board Compatible to Arduino Nano CH340 USB Driver Nano V3.0 ATmega328
Asin: B09KGVDXZY | Model: 3-01-1714 | PartNumber: 3-01-1714
Type-C Usb Download And Power.
Eight Analog Inputs Ports: A0 ~ A7.
Atmega328p-Au Mcu Chipset, Bootloaded..
Features
- Nano 3.0 ATmega328P Type-C USB CH340 Controller Board
- Atmega328P-AU MCU Chipset, bootloaded.
- Type-C USB download and Power
- Eight analog inputs ports: A0 ~ A7
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #5
HiLetgo 3pcs ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module Works Great for Arduino IDE/Micropython (Large)
Asin: B081CSJV2V
Data Download Access To The Website: Http://Www;Nodemcu;Com.
Arduino Compatible, Works Great With The Latest Arduino Ide/Mongoose Iot/Micropython.
Features
- Built-in Micro-USB, with flash and reset switches, easy to program
- Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython
- Data download access to the website: http://www;nodemcu;com
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #6
HiLetgo 2pcs PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module for Arduino Robot
Asin: B07BRS249H | Model: 3-01-1070-2pcs | PartNumber: 3-01-1070-2pcs
Voltage: Dc5-10V Power Supply.
All Pwm Output Lines Have A 220 Ohm Series Resistor Protection And Can Easily Drive Led..
The Pca9685 Chip Is Wrapped In The Center Of The Board.
16-Way Steering Gear Control.
Features
- Communication Interface: IIC
- 16-way steering gear control
- Voltage: DC5-10V power supply
- The PCA9685 chip is wrapped in the center of the board
- All PWM output lines have a 220 ohm series resistor protection and can easily drive LED.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #7
HiLetgo 37 Sensors Assortment Kit 37 Sensors Kit Sensor Starter Kit for Arduino Raspberry pi Sensor kit 37 in 1 Robot Projects Starter Kits for Arduino Raspberry pi
Asin: B01N5910XS | Model: 4331032886 | PartNumber: 4331032886
Touch Sensor Moduleheartbeat Detection Module.
Infrared Sensor Receiver Module.
37 Sensors Assortment Kit For Arduino Mcu Education.
Features
- 37 Sensors Assortment Kit in One Starter Kit
- 37 Sensors Assortment Kit for Arduino MCU Education
- Touch sensor moduleHeartbeat detection module
- Infrared sensor receiver module
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #8
HiLetgo 5pcs IPX IPEX-1 U.FL to SMA Female Pigtail Antenna Wi-Fi Coaxial Low Loss Cable 6 inch (15cm)
Asin: B01HXU1PKS | Model: 3-01-1114-B | PartNumber: 3-01-1114-B
Impendence :50 Ohm.
Cable Length: 6 Inch (15Cm).
Connector 2:Ipx/U.Fl Connector.
Features
- Connector 1:SMA Female straight
- Connector 2:IPX/U.FL Connector
- Impendence :50 ohm
- Cable Length: 6 inch (15cm)
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #9
HiLetgo 2pcs LM2596 Adjustable DC-DC Step Down Buck Power Convert Module 4.0-40V Input to 1.25-37V Output with LED Voltmeter Display
Asin: B00LSEBYHU | Model: 3-01-0167 | PartNumber: 3-01-0167 | Ean: 0702082654835 | UPC: 702082654835
Output Voltage Range Of 1.25V ~ 37V.
4.0-40V To 1.25-37V Led Voltmeter.
Features
- LM2596 DC-DC Buck Step-down Power Converter Module
- 4.0-40V to 1.25-37V LED Voltmeter
- output voltage range of 1.25V ~ 37V
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #10
HiLetgo ESP32 LoRa V3 SX1262 0.96 inch OLED Display Development Board WiFi Bluetooth Dual Core 240MHz CP2102 and 433-510MHz Antenna for Arduino Smart WiFi LoRa 32(Unsoldered)
Asin: B07FYWFH4C | Model: 8541612537 | PartNumber: 8541612537
Type-C Usb Interface With A Complete Voltage Regulator, Esd Protection, Short Circuit Protection, Rf Shielding, And Other Protection Measures..
Integrated Cp2102 Usb To Serial Port Chip,.
Onboard Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System.
Sx1262 Lora Node Chip..
Features
- Microprocessor: ESP32-S3FN8dual-core processor, frequency up to 240 MHz
- SX1262 LoRa node chip.
- Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures.
- Onboard SH1.25-2 battery interface, integrated lithium battery management system
- Integrated CP2102 USB to serial port chip,
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.07 Pounds
See On Amazon #11
HiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due
Asin: B07BJ2P6X6 | Model: 3-01-0038-5PCS | PartNumber: 3-01-0038-5PCS
Chip Level Conversion: The Module Converts Chip Level Data Into A Standard Format For Easy Access And Analysis..
Lightweight And Compact: Weighing Just 0.11 Pounds, The Module Is Lightweight And Compact For Easy Handling..
6-Pin Spi Interface: The Module Features A 6-Pin Spi Interface For Connecting To Micro Sd Cards And Reading Data..
Features
- Compatible with Arduino UNO, R3, MEGA 2560 Due: The HiLetgo 5pcs Micro SD TF Card Adapter Reader Module works with these Arduino boards for easy data transfer.
- 6-pin SPI interface: The module features a 6-pin SPI interface for connecting to micro SD cards and reading data.
- Chip level conversion: The module converts chip level data into a standard format for easy access and analysis.
- Lightweight and compact: Weighing just 0.11 pounds, the module is lightweight and compact for easy handling.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo®
Weight: 0.11 pounds
See On Amazon #12
HiLetgo FT232RL Mini USB to TTL Serial Converter Adapter Module 3.3V/5.5V
Asin: B00IJXZQ7C | Model: 3-01-0661-1 | PartNumber: 3-01-0661-1 | Ean: 0509049833148 | UPC: 509049833148
Pin Definition: Dtr,Rxd,Tx,Vcc,Cts,Gnd.
Support Win95/98/98Se/Me/2000/Xp/Win7 32Bit 64Bit /Vsita/, Do Not Support Win8.
Rxd/Txd Transceiver Communication Indicator, With 500Ma Self-Restore Fuse.
Features
- Chipset: FT232RL, not genuine FTDI chip, Working Voltage: 3.3V/5.5V
- RXD/TXD transceiver communication indicator, with 500MA self-restore Fuse
- Pin Definition: DTR,RXD,TX,VCC,CTS,GND
- Support Win95/98/98se/ME/2000/XP/win7 32bit 64bit /Vsita/, do not Support Win8
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 4.00 x 6.00 x 0.50 inches | Weight: 0.01 Pounds
See On Amazon #13
HiLetgo 3pcs Pro Micro ATmega32U4 5V/16MHz Type-C Module with Pin Headers Compitable with Arduino
Asin: B09KGY2NWT | Model: 3-01-1713 | PartNumber: 3-01-1713
On-Board Type-C Connector For Programming.
Rx And Tx Hardware Serial Connections.
4X10-Bit Adc Pins, 12Xdigital I/Os (5 Are Pwm Capable).
Supported Under Ide V1.0.1.
Features
- ATMega 32U4 running at 5V/16MHz
- Supported under IDE v1.0.1
- On-Board Type-C connector for programming
- 4x10-bit ADC pins, 12xDigital I/Os (5 are PWM capable)
- Rx and Tx Hardware Serial Connections
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #14
HiLetgo ST-Link V2 Emulator Downloader Programmer STM32F103C8T6 STM8 STM32 with Cable (Random Color)
Asin: B07SQV6VLZ
Supports Automatic Firmware Upgrade, The Factory Has Been Upgraded To The Latest Firmware V2.J17.S4;.
The Interface Definition Directly In The Shell Marked, Clear, Convenient And Practical;.
The Interface Easy To Use Simple Horns Seat Pitch Of 2.54, With 20Cm Dupont Line, The Line Can Respond To Different Target Sequence, Flexible Wiring.
Features
- Increase 5V power output, the output I / O port protection are not afraid of operational errors caused damage!
- The interface easy to use simple horns seat pitch of 2.54, with 20CM DuPont line, the line can respond to different target sequence, flexible wiring
- Supports automatic firmware upgrade, the factory has been upgraded to the latest firmware V2.J17.S4;
- The interface definition directly in the shell marked, clear, convenient and practical
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #15
HiLetgo VK172 G-Mouse USB GPS/GLONASS USB GPS Receiver for Windows 10/8/7/VISTA/XP
Asin: B01MTU9KTF | Model: 13 | PartNumber: 13
Supported Operating Systems: Windows 10/8/7/Vista/Xp/Ce.
Tracking Sensitivity:-162Dbm.
Reference Coordinate System: Wgs-84.
Vk172 G-Mouse Usb Gps/Glonass Usb Gps Receiver.
Features
- VK172 G-MOUSE USB GPS Receiver for Windows 10/8/7/VISTA/XP
- VK172 G-MOUSE USB GPS/GLONASS USB GPS Receiver
- Supported operating systems: Windows 10/8/7/Vista/XP/CE
- Reference coordinate system: WGS-84
- Tracking sensitivity:-162dBm
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #16
HiLetgo GY-NEO6MV2 NEO-6M GPS Flight Controller Module 3V-5V with Super Strong Ceramic Antenna for Arduino EEPROM APM 2.5
Asin: B01D1D0F5M | Model: 3-01-1087 | PartNumber: 3-01-1087
With Data Backup Battery;With Led Signal Indicator.
Compatible With A Variety Of Flight Control Module.
Default Baud Rate: 9600, Interface: Rs232 Ttl.
Save The Configuration Parameter Data Eeprom Down.
Features
- Module with a ceramic antenna, superior signal
- Save the configuration parameter data EEPROM Down
- With data backup battery;With LED signal indicator
- Default baud rate: 9600, Interface: RS232 TTL
- Compatible with a variety of flight control module
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #17
HiLetgo 3pcs TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions
Asin: B07PKND8KG | Model: 3-01-1503 | PartNumber: 3-01-1503
Battery: Over-Current Protection Current 3 A.
Light State: No Load The Light Not Bright, Red Light For Recharging, Is Full Of Green Light..
Maximum Charging Current Output: 1000 Ma.
Battery Overcharge Lifting Voltage: 4.00 V.
Features
- Input interface: Type-c USB.
- Battery overcharge lifting voltage: 4.00 V
- Battery: over-current protection current 3 A
- Maximum charging current output: 1000 ma
- Light state: no load the light not bright, red light for recharging, is full of green light.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.01 pounds
See On Amazon #18
HiLetgo 3pcs Nano V3.0 3.0 Controller Terminal Adapter Expansion Board Nano IO Shield Simple Extension Plate for Arduino Mano AVR ATMEGA328P
Asin: B073JGV87F | Model: 3-01-1454 | PartNumber: 3-01-1454
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #19
HiLetgo 5pcs USB 2.0 A Male to DC 5.5x2.1mm 5 Volt DC Connector Charge Barrel Jack Power Cable Black(Max 2.5 Ampere Power Cable, Center PIN Positive)
Asin: B073SNC45F | Model: 3-01-1424 | PartNumber: 3-01-1424
High Quality Copper Wire Core..
Easy To Use, Power For Your Mobile Hard Drive..
For Small Electronics And Devices Which Use A 5.5Mm Barrel Jack For A Power Cable..
High Quality Copper Wire Core..
Features
- Provides 5V DC from USB; Cable length: 1m.
- High quality copper wire core.
- High quality copper wire core.
- For small electronics and devices which use a 5.5mm barrel jack for a power cable.
- Easy to use, power for your mobile hard drive.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #20
HiLetgo 10pcs IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot 3-Wire Reflective Photoelectric for Arduino Smart Car Robot
Asin: B07W97H2WS | Model: 3-01-0063 | PartNumber: 3-01-0063
The Effective Distance Range Of 2 ~ 30Cm, The Working Voltage Of 3.3V- 5V.
Features
- Can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on.
- The effective distance range of 2 ~ 30cm, the working voltage of 3.3V- 5V
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #21
HiLetgo 3pcs HC-SR501 PIR Infrared Sensor Human Body Infrared Motion Module for Arduino Raspberry Pi
Asin: B07KZW86YR | Model: 3-01-0120 | PartNumber: 3-01-0120
Delay Time: 5-200S(Adjustable) The Range Is (0.Xx Second To Tens Of Second).
Angle Sensor: <100 ° Cone Angle Lens Size Sensor:Diameter:23Mm(Default).
Board Dimensions: 32Mm*24Mm.
Quiescent Current: <50Ua Trigger: L Can Not Be Repeated Trigger/H Can Be Repeated Trigger(Default Repeated Trigger).
Features
- Operating voltage range: DC 4.5-20V
- Quiescent Current: <50uA Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger)
- Delay time: 5-200S(adjustable) the range is (0.xx second to tens of second)
- Board Dimensions: 32mm*24mm
- Angle Sensor: <100 cone angle Lens size sensor:Diameter:23mm(Default)
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.05 pounds
See On Amazon #22
HiLetgo ESP32 V3 LoRa V3 SX1262 0.96 inch OLED Display Development Board WiFi Bluetooth Dual Core 240MHz CP2102 and 863-928MHz Antenna for Arduino Smart Home WiFi LoRa 32(Unsoldered)
Asin: B07WHRS2XG | Model: 3-01-1496 | PartNumber: 3-01-1496
Onboard Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System.
Integrated Cp2102 Usb To Serial Port Chip, Convenient For Program Downloading, And Debugging Information Printing..
Onboard 0.96-Inch 128*64 Dot Matrix Oled Display.
Sx1262 Lora Node Chip..
Features
- Microprocessor: ESP32-S3FN8 dual-core processor, frequency up to 240 MHz
- SX1262 LoRa node chip.
- Onboard SH1.25-2 battery interface, integrated lithium battery management system
- Onboard 0.96-inch 128*64 dot matrix OLED display
- Integrated CP2102 USB to serial port chip, convenient for program downloading, and debugging information printing.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #23
HiLetgo 125Khz EM4100 USB RFID ID Card Reader Swipe Card Reader Plug and Play with Cable First 10 Digit
Asin: B01MZYYDUV | Model: 3-01-1240 | PartNumber: 3-01-1240
Output Format: First 10 Digit.
Built In Operating Buzzer.
125Khz Em4100 Usb Rfid Id Card Reader Plug.
Size: 110Mm X 80Mm X 26Mm.
Features
- Can read TK4100, EM4100 Card/Tag
- Size: 110mm x 80mm x 26mm
- Output format: First 10 digit
- 125Khz EM4100 USB RFID ID Card Reader Plug
- Built in operating buzzer
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 1.02 x 4.33 x 3.15 Inches
See On Amazon #24
HiLetgo 3pcs Nano V3.0 ATmega328P CH340G 5V 16M Mini USB Micro Controller Board Development Board with PIN Headers Pin Unsoldered
Asin: B01DLIJQA2 | Model: 8541586069 | PartNumber: 8541586069
Support For External 5V~12V Dc Power Supply, Support Power Supply By 9V Battery..
Nano V3.0 Atmega328p Improved Version With 3Pcs Pin Headers. No Welding Needed..
Support Usb Download And Power..
Features
- Using Atmel Atmega328P-AU MCU, Support ISP download,using the same chips ATmega328P and CH340 with the official version.
- Support USB download and Power.
- Support for external 5V~12V DC power supply, Support power supply by 9V battery.
- Nano V3.0 ATMEGA328P improved version with 3pcs pin headers. No welding needed.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #25
HiLetgo 10pcs 18650 Battery Clip 18650 Battery Holder 18650 Batteries Case for 18650 Battery with Connect Lead
Asin: B00LSG5BKO | Model: 3-01-0172 | PartNumber: 3-01-0172 | Ean: 0702082654873 | UPC: 702082654873
For 18650 Battery.
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 0.59 x 2.95 x 2.36 inches | Weight: 0.18 Pounds
See On Amazon #26
HiLetgo 5PCS Lilypad Coin Cell Battery Holder CR2032 Battery Holder Case Module
Asin: B0749DS2HN | Model: 3-01-1154 | PartNumber: 3-01-1154
Characteristic: 4 Connection Points.
Feature: Holding A 20Mm Coin Cell Battery.
Strong Point: Small Slide Switch Installed On The Board.
Characteristic: Cr2032 Battery Mount Module.
Features
- Feature: LilyPad Coin Cell Battery Holder
- Characteristic: CR2032 Battery Mount Module
- Characteristic: 4 connection points
- Strong point: Small slide switch installed on the board
- Feature: Holding a 20mm coin cell battery
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #27
HiLetgo 2pcs ESP32-DevKitC ESP32-WROOM-32U Core Board ESP32 ESP-32 ESP-WROOM-32U Development Board for Arduino
Asin: B09KLS2YB3 | Model: 3-01-1670 | PartNumber: 3-01-1670
Esp32-Devkitc V4 Is A Small-Sized Esp32-Based Development Board..
Most Of The I/O Pins Are Broken Out To The Pin Headers On Both Sides For Easy Interfacing..
Esp32 Esp-32 Esp-Wroom-32U Development Board.
Features
- ESP32-DevKitC ESP32-WROOM-32U Core Board
- ESP32 ESP-32 ESP-WROOM-32U Development Board
- ESP32-DevKitC V4 is a small-sized ESP32-based development board.
- Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #28
HiLetgo 5pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board for Arduino PI PIC Raspberry Pi
Asin: B00LPK0E5A | Model: 3-01-0153 | PartNumber: 3-01-0153 | Ean: 0702082654729 | UPC: 702082654729
Diameter: 28Mm.
Speed Down Stepping Motor.
Voltage: 5V.
Stepping Angle: 5.625 X 1/64.
Features
- HiLetgo Stepper Motor+ Driver Board
- Stepping angle: 5.625 X 1/64
- Diameter: 28mm
- Voltage: 5V
- Speed down stepping motor
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #29
HiLetgo 3pcs Pro Mini Atmega328P 5V/16M Replace ATmega128 Pro Mini Atmega328 328P DC5V 16M for Arduino
Asin: B07X2JGS69 | Model: 3-01-1462-5V | PartNumber: 3-01-1462-5V
Support Serial Download, 5V/16M.
3 Pin Headers Included.
Support External Power Supply 3.8-12V Dc.
Fully Compatible To Arduino Boards.
Features
- Main chip: Atmel Atmega328P-AU
- Fully compatible to Arduino Boards
- Support Serial Download, 5V/16M
- Support external power supply 3.8-12V DC
- 3 Pin headers included
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #30
HiLetgo 5pcs RS232 to TTL Converter Module COM Serial Port Board MAX3232 MAX232CSE
Asin: B00LPK0Z9A | Model: 3-01-0136 | PartNumber: 3-01-0136 | Ean: 0702082654590 | UPC: 702082654590
Four Interface: Vcc, Gnd, Rxd, Txd.
Communication Chip: Max3232 Chip.
Operating Voltage: 3.3V~5V.
Features
- HiLetgo MAX3232 RS232 to TTL Converter Module
- Operating Voltage: 3.3V~5V
- Four Interface: VCC, GND, RXD, TXD
- Communication Chip: MAX3232 chip
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.02 Pounds
See On Amazon