Ganivsor - Buying Guide
Last Updated: 05/24/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
151120 o-ring for Pentek Water Filter Housing 5 pack
Asin: B07TVSRC71 | Ean: 0791311070713 | UPC: 791311070713
Material: Buna-N (Nitrile Butadiene Rubber).
Approximately 3.9" Id X4.15" Od X 0.14" Thickness.
Features
- 151120 o-ring for Pentek Water Filter Housing 5 pack
- Approximately 3.9 ID x4.15 OD x 0.14 Thickness
- Material: Buna-N (nitrile butadiene rubber)
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin parts shop
See On Amazon #2
Ganivsor 36" Thermopile Generators 750 Millivolt Thermopile Q313A for Gas Water Heater/Fireplace/Gas Fryer/Oven, 750 Temperature Resistance Cluster Thermocouple for Fireplace (36" Aluminum)
Asin: B0CFTMS5PP
♨It Will Needs About 60 Seconds (2 Minutes ) To Heat Up To The 750Mv And The Flame Should Be Heat The Middle Of The Head Sensor, So You May Need Time To Waiting The Valve Start Work..
♨For Models: Qv32 Qv32-A Qv32b Qv32b-A (Pre Serial # 0021080519) Qv36 Qv36-A Qv36b-A (Pre Serial # 0021076968) Qv36d Qv36d-A Qv36db Qv36db-A Qvi25 Qvi30 Qvi35 Qvi-25Fb Qvi-30Fb Qv Pier Heat N Glo Gas Stoves: At-Grand (Also Fits The B, C And D Models). Csa Approved Parts Quality Assured. 750 Millivolt Replacement Thermopile Generators Have Long Been Used In Self-Powered Heaters And Hot Water Equipment..
♨Replace Part Number: Q313a, 60125501, 60J79, 60J7901, H5882, R942, R1054, 2103-512, 1950-001, 071515, 53374, 7533113. The Repalcement Of Heatilator Thermopile 100% Tested, Quality Assured. Suitable For American Deep Fryer Thermostat Control Valve Pilots Light.
♨Normal Working Temperature 700-750°C. Replacement Of Heatilator Heat N Glo 36" Lead Thermopile, Fits Empire Dv210, Dv215, Gwt25, Gwt35, And Gwt50 Models Replacement Of Pitco 60125501 Model.
Features
- The Thermopile is a Replacement of Fireplace Pilot Burner Assemnly Parts with Internal resistance (25 C) around 4000 m and heating voltage above 750mV. Specifications: Length 36"(914.4mm) Glass Fiber Wire. Connecting type: spiral type and two-pole plug-in type. normally installed on plilot assembly used for fireplaces, frying, heating appliance
- Normal working temperature 700-750 C. Replacement of Heatilator Heat n Glo 36 Lead Thermopile, Fits Empire DV210, DV215, GWT25, GWT35, and GWT50 Models Replacement of PITCO 60125501 Model
- It will needs about 60 seconds (2 minutes ) to heat up to the 750mV and the flame should be heat the middle of the head sensor, So you may need time to waiting the valve start work.
- Replace Part Number: Q313A, 60125501, 60J79, 60J7901, H5882, R942, R1054, 2103-512, 1950-001, 071515, 53374, 7533113. The Repalcement of heatilator thermopile 100% Tested, Quality Assured. Suitable For American Deep Fryer Thermostat Control Valve Pilots Light
- For Models: QV32 QV32-A QV32B QV32B-A (Pre Serial # 0021080519) QV36 QV36-A QV36B-A (Pre Serial # 0021076968) QV36D QV36D-A QV36DB QV36DB-A QVI25 QVI30 QVI35 QVI-25FB QVI-30FB QV Pier Heat N Glo Gas Stoves: AT-Grand (Also fits the B, C and D models). CSA approved parts quality assured. 750 Millivolt Replacement Thermopile Generators have long been used in self-powered heaters and hot water equipment.
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin Parts Shop
Dimensions: 1.00 x 3.00 x 1.00 inches
See On Amazon #3
Ganivsor 24" Thermopile Generators 750 Millivolt Thermopile Q313A for Gas Water Heater/Fireplace/Gas Fryer/Oven, 750 Temperature Resistance Cluster Thermocouple for Fireplace (24" Aluminum)
Asin: B0CFTKJ8SS
♨Replace Part Number: 60125501, 60J79, 60J7901, H5882, R942, R1054, 2103-512, 1950-001, 071515, 53374, 7533113. The Repalcement Of Heatilator Thermopile 100% Tested, Quality Assured. Suitable For American Deep Fryer Thermostat Control Valve Pilots Light.
♨750 Millivolt Replacement Thermopile Generators Have Long Been Used In Self-Powered Heaters And Hot Water Equipment..
♨It Will Needs About 60 Seconds (2 Minutes ) To Heat Up To The 750Mv And The Flame Should Be Heat The Middle Of The Head Sensor, So You May Need Time To Waiting The Valve Start Work..
♨Normal Working Temperature 700-750°C. Replacement Of Heatilator Heat N Glo 24" Lead Thermopile, Fits Empire Dv210, Dv215, Gwt25, Gwt35, And Gwt50 Models Replacement Of Pitco 60125501 Model.
Features
- The Thermopile is a Replacement of Fireplace Pilot Burner Assemnly Parts with Internal resistance (25 C) around 4000 m and heating voltage above 750mV. Specifications: Length 24"(609mm) Glass Fiber Wire. Connecting type: spiral type and two-pole plug-in type. normally installed on plilot assembly used for fireplaces, frying, heating appliance
- Normal working temperature 700-750 C. Replacement of Heatilator Heat n Glo 24 Lead Thermopile, Fits Empire DV210, DV215, GWT25, GWT35, and GWT50 Models Replacement of PITCO 60125501 Model
- Replace Part Number: 60125501, 60J79, 60J7901, H5882, R942, R1054, 2103-512, 1950-001, 071515, 53374, 7533113. The Repalcement of heatilator thermopile 100% Tested, Quality Assured. Suitable For American Deep Fryer Thermostat Control Valve Pilots Light
- It will needs about 60 seconds (2 minutes ) to heat up to the 750mV and the flame should be heat the middle of the head sensor, So you may need time to waiting the valve start work.
- 750 Millivolt Replacement Thermopile Generators have long been used in self-powered heaters and hot water equipment.
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin Parts Shop
Dimensions: 0.03 x 1.00 x 1.00 inches
See On Amazon #4
4/Pack OR-100 Water Filter Housing O-Ring for Culligan fits Ace Hardware 49561 Pentek 151122 GXWH35F (WS03X10039)
Asin: B07PGLY3TY | Ean: 0791270862862 | UPC: 791270862862
Material: Buna-N (Nitrile Butadiene Rubber).
Ace Hardware 49561.
Pentek 151122, Bb Buna-N.
About Approximately 5.5" Id X 5.8" Od X 0.165" Thickness.
Features
- 4/pack OR-100 Water Filter Housing O-Ring for Culligan fits Ace Hardware 49561 Pentek 151122 GXWH35F (WS03X10039)
- about Approximately 5.5 ID x 5.8 OD x 0.165 Thickness
- Material: Buna-N (nitrile butadiene rubber)
- Pentek 151122, BB BUNA-N
- Ace Hardware 49561
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin parts shop
See On Amazon #5
Ganivsor 2-Packs 36" Thermopile Generators 750mv Parts 60125501, R1054, 7533113, 1950-001 for Gas Water Heater/Fireplace/Gas Fryer/Oven, 750 Temperature Resistance Cluster Thermocouple (36" Aluminum)
Asin: B0CL92SRGN | Model: R1054, 7533113, 1950-001, 071515 | PartNumber: R1054, 7533113, 1950-001, 071515
♨It Will Needs About 60 Seconds (2 Minutes ) To Heat Up To The 750Mv And The Flame Should Be Heat The Middle Of The Head Sensor, So You May Need Time To Waiting The Valve Start Work..
♨For Models: Qv32 Qv32-A Qv32b Qv32b-A (Pre Serial # 0021080519) Qv36 Qv36-A Qv36b-A (Pre Serial # 0021076968) Qv36d Qv36d-A Qv36db Qv36db-A Qvi25 Qvi30 Qvi35 Qvi-25Fb Qvi-30Fb Qv Pier Heat N Glo Gas Stoves: At-Grand (Also Fits The B, C And D Models). Csa Approved Parts Quality Assured. 750 Millivolt Replacement Thermopile Generators Have Long Been Used In Self-Powered Heaters And Hot Water Equipment..
♨The Repalcement Of Heatilator Thermopile 100% Tested, Quality Assured. Suitable For American Deep Fryer Thermostat Control Valve Pilots Light.
♨Replace Parts Number: 60125501, R1054, 7533113, 1950-001, 071515. Normal Working Temperature 700-750°C. Replacement Of Heatilator Heat N Glo 36" Lead Thermopile, Fits Empire Dv210, Dv215, Gwt25, Gwt35, And Gwt50 Models Replacement Of Pitco 60125501 Model.
Features
- The Thermopile is a Replacement of Fireplace Pilot Burner Assemnly Parts with Internal resistance (25 C) around 4000 m and heating voltage above 750mV. Specifications: Length 36"(914.4mm) Glass Fiber Wire. Connecting type: spiral type and two-pole plug-in type. normally installed on plilot assembly used for fireplaces, frying, heating appliance
- Replace Parts Number: 60125501, R1054, 7533113, 1950-001, 071515. Normal working temperature 700-750 C. Replacement of Heatilator Heat n Glo 36 Lead Thermopile, Fits Empire DV210, DV215, GWT25, GWT35, and GWT50 Models Replacement of PITCO 60125501 Model
- It will needs about 60 seconds (2 minutes ) to heat up to the 750mV and the flame should be heat the middle of the head sensor, So you may need time to waiting the valve start work.
- The Repalcement of heatilator thermopile 100% Tested, Quality Assured. Suitable For American Deep Fryer Thermostat Control Valve Pilots Light
- For Models: QV32 QV32-A QV32B QV32B-A (Pre Serial # 0021080519) QV36 QV36-A QV36B-A (Pre Serial # 0021076968) QV36D QV36D-A QV36DB QV36DB-A QVI25 QVI30 QVI35 QVI-25FB QVI-30FB QV Pier Heat N Glo Gas Stoves: AT-Grand (Also fits the B, C and D models). CSA approved parts quality assured. 750 Millivolt Replacement Thermopile Generators have long been used in self-powered heaters and hot water equipment.
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin Parts Shop
Dimensions: 1.00 x 3.00 x 1.00 Inches
See On Amazon #6
Ganivsor 2PCS 24" Thermopile Generators 750mv Parts 60125501, R1054, 7533113, 1950-001 for Gas Water Heater/Fireplace/Gas Fryer/Oven, 750 Temperature Resistance Cluster Thermocouple (24" Aluminum)
Asin: B0CL9DLZM6 | Model: 60125501, R1054, 7533113, 1950-001 | PartNumber: 60125501, R1054, 7533113, 1950-001
♨It Will Needs About 60 Seconds (2 Minutes ) To Heat Up To The 750Mv And The Flame Should Be Heat The Middle Of The Head Sensor, So You May Need Time To Waiting The Valve Start Work..
♨(2 Pack In The Package) 750 Millivolt Replacement Thermopile Generators Have Long Been Used In Self-Powered Heaters And Hot Water Equipment..
♨The Repalcement Of Heatilator Thermopile 100% Tested, Quality Assured. Suitable For American Deep Fryer Thermostat Control Valve Pilots Light.
♨Replace Parts Number: 60125501, R1054, 7533113, 1950-001, 071515. Normal Working Temperature 700-750°C. Replacement Of Heatilator Heat N Glo 24" Lead Thermopile, Fits Empire Dv210, Dv215, Gwt25, Gwt35, And Gwt50 Models Replacement Of Pitco 60125501 Model.
Features
- The Thermopile is a Replacement of Fireplace Pilot Burner Assemnly Parts with Internal resistance (25 C) around 4000 m and heating voltage above 750mV. Specifications: Length 24"(609mm) Glass Fiber Wire. Connecting type: spiral type and two-pole plug-in type. normally installed on plilot assembly used for fireplaces, frying, heating appliance
- Replace Parts Number: 60125501, R1054, 7533113, 1950-001, 071515. Normal working temperature 700-750 C. Replacement of Heatilator Heat n Glo 24 Lead Thermopile, Fits Empire DV210, DV215, GWT25, GWT35, and GWT50 Models Replacement of PITCO 60125501 Model
- It will needs about 60 seconds (2 minutes ) to heat up to the 750mV and the flame should be heat the middle of the head sensor, So you may need time to waiting the valve start work.
- The Repalcement of heatilator thermopile 100% Tested, Quality Assured. Suitable For American Deep Fryer Thermostat Control Valve Pilots Light
- (2 Pack in the Package) 750 Millivolt Replacement Thermopile Generators have long been used in self-powered heaters and hot water equipment.
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin Parts Shop
Dimensions: 0.03 x 1.00 x 1.00 inches
See On Amazon #7
Ganivsor 151122 O-Ring (5/Pack) OR-100 for Pentek Pentair Water Big Blue Housings (Color Orange) - Water Filter O-Ring OEM Size (5.5"ID 5.83"OD 0.165"Thick)
Asin: B0C6ZJCV3N
151122 O-Ring Direct Replacement For The Following Part Numbers: Ace Hardware 4001756; American Plumber 152032, W10-Or; Apec O-Ring-Hb; Ametek Kleen-Plus 151122-03; Culligan Or-100, 151122-27, 01019189; Homemaster #Oring122; Pentek 151122, Bb Buna-N(See Description Below For Full Water Filter Compatibility List).
Material: Buna-N (Nitrile Butadiene Rubber).
Size: Approximately 5.5" Inside Diameter × 5.83" Outside Diameter × 0.165" Thickness..
Features
- 151122 O-Ring for Pentek Big Blue Water Filters Housing(5 Pack and Orange Color)
- SIZE: Approximately 5.5 Inside Diameter 5.83 Outside Diameter 0.165 Thickness.
- 151122 O-Ring Direct Replacement for the following part numbers: Ace Hardware 4001756; American Plumber 152032, W10-OR; APEC O-RING-HB; Ametek Kleen-Plus 151122-03; Culligan OR-100, 151122-27, 01019189; HomeMaster #Oring122; Pentek 151122, BB BUNA-N(see description below for full water filter compatibility list)
- Material: Buna-N (nitrile butadiene rubber)
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin parts shop
Dimensions: 0.16 x 5.00 x 5.00 Inches
See On Amazon #8
Ganivsor 151120 OR-34 O-Ring (5/Pack) for Pentek Culligan Dupont Water Filter Housing (Color Orange) - Water Filter O-Ring OEM Size (3.9"ID 4.15"OD 0.14"Thickness)
Asin: B0C6ZNKGK9 | Model: 151120 | PartNumber: 151120
Water Filter O Ring 151122 Direct Replacement For Part Numbers: Ace Hardware 46766, American Plumber 152030, W34-Or, Ametek Kleen-Plus 151120-03, Or-34, Culligan 01019184, 151120-27, Dupont Wfao150, Hydrotech 151120, Pentek 151120, Omnifilter 151120, Or-34, Pura 151120, Us Filter Or-34.
Material: Buna-N (Nitrile Butadiene Rubber).
Compatible With: Pentek #10, #12, And #20 Housings With 3/4" Inlet/Outlet Connections; Pentek 150071; Culligan Hf-150, Hf-150A (Rev A Or B Only), Hf-160, Hf-360 (Not For Hf-360A); Ace Hardware 45025, 46764, 46764; American Plumber W34-Pr, Wc34-Pr, Wv34, Wvc34; Ametek Kleen-Plus Pscl-Si, Pscl-S1, Ps-Oo, Ps-00, Pvhcl-Si, Pvhcl-S1; Aqua-Flo 26264; Omnifilter Wh1, Wh5, Wh12, Ob1 (Series A), U25 (Series E).
Size: Approximately 3.9" Inside Diameter × 4.15" Outside Diameter × 0.14" Thickness..
Features
- 151120 OR-34 O-Ring for Pentek Culligan DuPont Water Filter Housing
- SIZE: Approximately 3.9 Inside Diameter 4.15 Outside Diameter 0.14 Thickness.
- Water Filter O Ring 151122 Direct replacement for Part Numbers: Ace Hardware 46766, American Plumber 152030, W34-OR, Ametek Kleen-Plus 151120-03, OR-34, Culligan 01019184, 151120-27, DuPont WFAO150, Hydrotech 151120, Pentek 151120, Omnifilter 151120, OR-34, Pura 151120, US Filter OR-34
- Compatible with: Pentek #10, #12, and #20 housings with 3/4 inlet/outlet connections; Pentek 150071; Culligan HF-150, HF-150A (Rev A or B only), HF-160, HF-360 (Not for HF-360A); Ace Hardware 45025, 46764, 46764; American Plumber W34-PR, WC34-PR, WV34, WVC34; Ametek Kleen-Plus PSCL-SI, PSCL-S1, PS-OO, PS-00, PVHCL-SI, PVHCL-S1; Aqua-Flo 26264; Omnifilter WH1, WH5, WH12, OB1 (Series A), U25 (Series E)
- Material: Buna-N (nitrile butadiene rubber)
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin parts shop
Dimensions: 0.15 x 3.00 x 2.00 inches | Weight: 0.00 Pounds
See On Amazon #9
Ganivsor 120630-02 Pilot ODS for Desa Glo-Warm Vent Free Propane Gas Wall Heaters - 2000 Watts Pilot ODS Assembly
Asin: B0CMCB6G73 | Model: 120630-02 | PartNumber: 120630-02
♨The 120630-02 Pilot Ods Assembly Take The 120790-01 Dual Wire Thermocouple. The 120790-01 Thermocouple Dual Wire 22.5 Inch Length With Silver And Orange Transmitter Wires That Fits The Desa International Unvented Vent-Free Infrared Gas Wall Heater..
♨We Offer High Quality And Longevity To Ensure That Your Unvented Gas Logs Sets, Wall Heaters And Fireplaces Will Work Properly. Contact Us If You Have Any Questions!.
♨Some Of The Brand Names Are Vanguard, Comfort Flame, Glo-Warm, Cozy Heat, Kozy World, Pro Com, Desa International And Others..
♨The 120630-02 Pilot Ods Assembly For Many Of The Unvented Lp Gas Wall Heaters And Lpg Unvented Gas Log Sets And Fireplaces..
Features
- Replaces part numbers: 098245-01, 098245-03, 099440-02, 099440-06, 107667-02, 110803-02, ene 56817, ene 70366, J5527 F. The right ODS Pilot Assembly must be used for the correct model number heater.
- The 120630-02 Pilot ODS assembly for many of the unvented LP Gas wall heaters and LPG unvented gas log sets and fireplaces.
- The 120630-02 Pilot ODS assembly take the 120790-01 Dual Wire Thermocouple. The 120790-01 Thermocouple Dual Wire 22.5 Inch Length with silver and orange transmitter wires that fits the Desa International Unvented Vent-Free infrared gas wall heater.
- Some of the Brand Names are Vanguard, Comfort Flame, Glo-Warm, Cozy Heat, Kozy World, Pro Com, Desa International and others.
- We offer high quality and longevity to ensure that your Unvented Gas Logs sets, Wall Heaters and fireplaces will work properly. Contact us if you have any questions!
- See more on Amazon...
Brand: Ganivsor
Dimensions: 0.10 x 2.00 x 1.00 Inches
See On Amazon #10
SP-KFA1005 70-054-0200 Air Filter Kit Replaces Dyna-Glo Dura-Heat Dyna-Pro Thermoheat WorkHorse Dayton Heaters and more KFA1005 572227
Asin: B08FJ78W31 | Ean: 0726756760837 | UPC: 726756760837
Dayton Part# 44F285 - Models 3Ve48, 3Ve49, 3Ve48, 3Ve50, 3Ve51, 3Ve52.
This Filter Kit Is Used On All Oil Fired Heaters Made By Rmc, Cfm, Dura Heat And Ghp.
Other Models May Use A Sponge Filter That Is A Half Moon Shape. That Filter Kit Is Part# 70-054-0100.
This 70-054-0200 Filter Kit Includes All Three Air Filters. The Input And Output Filters Are Triangular In Shape. The Lint Filter Is Square..
Features
- SP-KFA1005 70-054-0200 Air Filter Kit part Replaces Dyna-Glo Dura-Heat Dyna-Pro Thermoheat WorkHorse Dayton and more
- This 70-054-0200 filter kit includes all three air filters. The input and output filters are triangular in shape. The lint filter is square.
- Dayton part# 44F285 - Models 3VE48, 3VE49, 3VE48, 3VE50, 3VE51, 3VE52
- Other models may use a sponge filter that is a half moon shape. That filter kit is part# 70-054-0100
- This filter kit is used on all oil fired heaters made by RMC, CFM, Dura Heat and GHP
- See more on Amazon...
Brand: Ganivsor
See On Amazon #11
Ganivsor Replacement PP214 Air Filter Kit for fits Desa Reddy Master Remington Heater HA3017 71-054-0300
Asin: B082RTRY7T | Ean: 0745245578197 | UPC: 745245578197
Here Is What Is Included In The Pp214 Kit:(1) M11637 Lint Filter(1) M12179 Intake Filter(1) M12244-1 Output Filter(1) M51150-01 Fuel Filter.
Following Reddy Heater Models: R100, R100a, R100b, R110, R110bt, R110c, R110m3, R115, R115t, R150b, R150bt, R150d, R150e, R150m, R150m2, R155, R155a, R155b, R165, R165a, R165at, R165t, R200, R200a, R200at, R200bt, Re200t.
The Pp214 Or Ha3017 Air Filter Kit Is For Every Nearly Oil Fired Heater Made By Desa 90K-200K Btu.
Features
- PP214 HA3017 Air Filter Kit for Desa Reddy Master Remington Heater 71-054-0300
- The PP214 or HA3017 air filter kit is for every nearly oil fired heater made by Desa 90k-200K BTU
- Here is what is included in the PP214 kit:(1) M11637 Lint Filter(1) M12179 Intake Filter(1) M12244-1 Output Filter(1) M51150-01 Fuel Filter
- following Reddy Heater models: R100, R100A, R100B, R110, R110BT, R110C, R110M3, R115, R115T, R150B, R150BT, R150D, R150E, R150M, R150M2, R155, R155A, R155B, R165, R165A, R165AT, R165T, R200, R200A, R200AT, R200BT, RE200T
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin parts shop
See On Amazon #12
O-Ring kit for Kegco,5 Gasket Sets fits Cornelius Home Brew Keg and Homebrewed with Pride keg Sticker
Asin: B07W3GLJWD | Ean: 0791311070973 | UPC: 791311070973
Material: Buna-N (Nitrile Butadiene Rubber).
O-Ring Set Includes: (5) Lid Closure O-Rings (10) Ball Lock Tank Plug O-Rings (10) Pin Lock Tank Plug O-Rings (10) Universal Dip Tube O-Rings.
Universal Kit - Fits Ball Lock (Pepsi) And Pin Lock (Coke) Kegs.
Features
- O-Ring kit for Kegco, 5 Gasket Sets fits Cornelius Home Brew Keg and Homebrewed With Pride keg sticker
- Universal kit - fits ball lock (Pepsi) and pin lock (Coke) kegs
- Material: Buna-N (nitrile butadiene rubber)
- O-ring set includes: (5) lid closure O-rings (10) ball lock tank plug O-rings (10) pin lock tank plug O-rings (10) universal dip tube O-rings
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin parts shop
See On Amazon #13
Ganivsor 32225 Wick for Kero World KW-24C DuraHeat DH-2300 Dyna-GLO CV-2300&RMC-95C Envirotemp CV-2300 Keroheat CV-2300, Heater Replacement Wicks, White
Asin: B0CMCFQ954 | Model: 32225 | PartNumber: 32225
♨Exclusive Black Top Fiber-Graph Burning Surface Has Been Proven To Reduce Carbon Build-Up By As Much As 38% Over Other White Top Wicks. Provides The Maximum Performance By Using The Newest Technology Available.
♨The Superior Design Of The Kerosene Heater Replacement Wicks Combines A Smooth Pelt Flow With A High-Temperature Burning Surface To Produce A More Complete Combustion Process. Provides Greater Security..
♨Easy To Install: The Heater Replacement Wicks Are Easy To Install With Precise Specifications..
♨Fits: Dura Heat: Dh2300-Dh2304，Dh2304s，Dh2400，Dh2400s; Dyna-Glo: Rmc-95C, 95C2,95C4, 95C6, 95C7, 96B, 96C, Wk95c6, 95C6b, 95C6c, 95C6r, Wk95c8, 95C8b, 95C8c, 95C8rbwk24bk, Wk24wh Spaceheaterparts; Envirotemp: 93043(Rmc-95C); Kero World: Kc2400-Kc2404b,Kw-24(A-H); Redstone: Wk95c6c,95C6r,95C6rb，Wk95c8,95C8b,95C8c,95C8rb..
Features
- Compatible with replacement wicks for Kero World KW-24C (2963-2510), DuraHeat DH-2300, Dyna-GLO CV-2300&RMC-95C, Envirotemp CV-2300, Keroheat CV-2300.
- FITS: DURA HEAT: DH2300-DH2304 DH2304S DH2400 DH2400S; DYNA-GLO: RMC-95C, 95C2,95C4, 95C6, 95C7, 96B, 96C, WK95C6, 95C6B, 95C6C, 95C6R, WK95C8, 95C8B, 95C8C, 95C8RBWK24BK, WK24WH SpaceHeaterParts; ENVIROTEMP: 93043(RMC-95C); KERO WORLD: KC2400-KC2404b,KW-24(A-H); REDSTONE: WK95C6C,95C6R,95C6RB WK95C8,95C8B,95C8C,95C8RB.
- Exclusive black top FIBER-GRAPH burning surface has been proven to reduce carbon build-up by as much as 38% over other white top wicks. Provides the maximum performance by using the newest technology available
- Easy to Install: The Heater Replacement Wicks are easy to install with precise specifications.
- The superior design of the Kerosene Heater Replacement Wicks combines a smooth pelt flow with a high-temperature burning surface to produce a more complete combustion process. Provides greater security.
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Ganivsor
See On Amazon #14
Replacement 5/8" thick PP205 HA3005 Rotor Kit for Desa, Reddy, Dyna, Glo Mi-T-M Master Heater KFA1022 710221350 71-022-1010
Asin: B07W1HJPV5 | Ean: 0791324563752 | UPC: 791324563752
Desa: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, Tsc: (Pp205, Ha3005, M22456-2).
Please Try To Find The Suitable Model Carefully To Avoid The Problem Of Mismatch After Purchase. Please Feel Free To Contact Us!.
Pinnacle: Protemp, Master, Remington, Heat-Stream, Workhorse, Heat Hog & Sunstream: (71-022-1350, 710221350, 71-022-1010, 710221010).
Rotor Kit 5/8" Thick , Diameter= 2 1/8". Kit Includes: ( 1 Rotor, 4 Vanes, And 1 Insert ) M22456-2 Rotor, M8643-2 Blades, M22009 Insert.
Features
- PP205 5/8" thick Rotor Kit for Reddy Master Mi-T-M Portable Forced Air Heater HA3005 KFA1022 710221350 71-022-1010
- Rotor Kit 5/8 Thick , Diameter= 2 1/8. Kit includes: ( 1 Rotor, 4 Vanes, and 1 Insert ) M22456-2 Rotor, M8643-2 Blades, M22009 Insert
- DESA: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, TSC: (PP205, HA3005, M22456-2)
- PINNACLE: ProTemp, Master, Remington, Heat-Stream, WorkHorse, Heat Hog & SunStream: (71-022-1350, 710221350, 71-022-1010, 710221010)
- Please try to find the suitable model carefully to avoid the problem of mismatch after purchase. Please feel free to contact us!
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin parts shop
See On Amazon #15
Space Heater Photocell PP236 M16656-24 for Reddy Remington Master Knipco Heaters Parts Replacement
Asin: B07VY3N7Y1 | Ean: 0709161365576, 0791311070874 | UPC: 709161365576, 791311070874
For Desa: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, Tsc: (Pp236, M16656-23, M1665623, M16656-24, M1665624).
This Photocell Is Used With Heaters That Have The Hot Surface Ignitor (Glow Plug). Unless You Have The Desa Upper Tier Heaters That Have The Plastic Handle And Shroud That Covers The Fuel Tank. That Photocell Is Part M16656-21.
Pinnacle: Protemp, Master, Remington, Heat-Stream, Workhorse, Heat Hog & Sunstream: (71-016-1010, 710161010).
The Wires Are 15" In Length.
Features
- PP236 M16656-24 Photocell for Reddy Remington Master Knipco Heaters Parts
- The wires are 15 in length
- for DESA: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, TSC: (PP236, M16656-23, M1665623, M16656-24, M1665624)
- PINNACLE: ProTemp, Master, Remington, Heat-Stream, WorkHorse, Heat Hog & SunStream: (71-016-1010, 710161010)
- This photocell is used with heaters that have the hot surface ignitor (glow plug). UNLESS you have the DESA upper tier heaters that have the plastic handle and shroud that covers the fuel tank. That photocell is part M16656-21
- See more on Amazon...
Brand: Ganivsor
See On Amazon #16
Ganivsor 32225 Wick (2/Pack) for Kero World KW-24C DuraHeat DH-2300 Dyna-GLO CV-2300&RMC-95C Envirotemp CV-2300 Keroheat CV-2300, Heater Replacement Wicks, White-2PCS
Asin: B0CNQQBTFB | Model: 32225 | PartNumber: 32225
♨Exclusive Black Top Fiber-Graph Burning Surface Has Been Proven To Reduce Carbon Build-Up By As Much As 38% Over Other White Top Wicks.
♨The Superior Design Of The Kerosene Heater Replacement Wicks Combines A Smooth Pelt Flow With A High-Temperature Burning Surface To Produce A More Complete Combustion Process. Provides Greater Security..
♨Easy To Install: The Heater Replacement Wicks Are Easy To Install With Precise Specifications..
♨Package: 2 X 32225 Wick. Provides The Maximum Performance By Using The Newest Technology Available.
Features
- Compatible with replacement wicks for Kero World KW-24C (2963-2510), DuraHeat DH-2300, Dyna-GLO CV-2300&RMC-95C, Envirotemp CV-2300, Keroheat CV-2300.
- Package: 2 x 32225 Wick. Provides the maximum performance by using the newest technology available
- Exclusive black top FIBER-GRAPH burning surface has been proven to reduce carbon build-up by as much as 38% over other white top wicks
- Easy to Install: The Heater Replacement Wicks are easy to install with precise specifications.
- The superior design of the Kerosene Heater Replacement Wicks combines a smooth pelt flow with a high-temperature burning surface to produce a more complete combustion process. Provides greater security.
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Ganivsor
See On Amazon #17
Replacement PP213 Air Filter Kit & 5/8" PP205 Rotor Kit for Portable Forced Air Heater for Reddy Desa All-Pro Remington Master Knipco Dayton HA3005 KFA1022 HA3014
Asin: B09GY191PD
[Desa Brands Include]: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, And Tsc: (Pp213, Pp205, Ha3014, Ha3005, M22456-2).
[Service Guarantee]: Contact Us If You Are Not Satisfied With It For Any Reason. We’Ll Process Full Refund Or Send You A Replacement Without Returning Or Any Additional Conditions. All Issues Will Be Solved Within 24 Hours.
[Pinnacle]: Protemp, Master, Remington, Heat-Stream, Workhorse, Heat Hog & Sunstream: (71-022-1350, 710221350, 71-022-1010, 710221010).
[Includes]: M29632 Lint Filter , M29633 Intake Filter , M29612-01 Asm Filter , Pp205 Rotor Kit For Air Heater.
Features
- Brand New - Unused Parts
- [Includes]: M29632 Lint Filter , M29633 Intake Filter , M29612-01 ASM Filter , PP205 Rotor Kit for Air Heater
- [DESA brands include]: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, and TSC: (PP213, PP205, HA3014, HA3005, M22456-2)
- [PINNACLE]: ProTemp, Master, Remington, Heat-Stream, WorkHorse, Heat Hog & SunStream: (71-022-1350, 710221350, 71-022-1010, 710221010)
- [Service Guarantee]: Contact us if you are not satisfied with it for any reason. We ll process full refund or send you a replacement without returning or any additional conditions. All issues will be solved within 24 hours
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin parts shop
Weight: 0.18 pounds
See On Amazon #18
Ganivsor Heater Oil Lamp Wick 95 t2.5 180mm for Kerosene Heater Wick Replacement, Fits Fiberglass Wicks by Stove Heaters, White Circular Weave
Asin: B0CPLNPH8P | Model: Heater Wick | PartNumber: Heater Wick
♨Application: Suitable For Various Kerosene Heater Models, These Oil Lamp Wicks Offer Versatility, Making Them An Essential Accessory For Your Kerosene Heater Maintenance Kit..
♨Packing Quantity: 1 × Heater Wick..
♨Characteristic: Versatile Compatibility, Complete Combustion, Quality Cotton, Fiberglass Material, Strong Oil Absorption And Environmentally Friendly & Smokeless.
♨Replacement Wick: Kerosene Heater Wick. Kerosene Furnace, Heating Furnace Core Accessories. The Wick Is Very Convenient To Use And Easy To Replace. Installation Only Takes A Few Minutes..
Features
- Size: This kerosene heater wick is about (95 t2.5 180mm). With a diameter of 95mm, thickness of 2.5mm, and length of 180mm, these glasssfiber wicks are designed to fit perfectly in your kerosene heater, facilitating easy installation.
- Replacement Wick: Kerosene heater wick. Kerosene furnace, heating furnace core accessories. The wick is very convenient to use and easy to replace. Installation only takes a few minutes.
- Application: Suitable for various kerosene heater models, these oil lamp wicks offer versatility, making them an essential accessory for your kerosene heater maintenance kit.
- Characteristic: Versatile Compatibility, Complete Combustion, Quality Cotton, Fiberglass Material, Strong Oil Absorption and Environmentally Friendly & Smokeless
- Packing Quantity: 1 Heater Wick.
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin Parts Shop
Dimensions: 0.30 x 0.50 x 0.50 Inches
See On Amazon #19
Replacement M16545 Filter Cover, PP217 Pump kit and PP214NF Filter kit for fits Desa Reddy Remington Master Heaters
Asin: B08DFK4V74 | Ean: 0726756760332 | UPC: 726756760332
Pinnacle Filter Cover Part Numbers (71-020-1010, 710201010).
If You Have Any Questions About This Item, Please Contact Us.We Will Help You As Soon As Possible.
This Part #M16545 Is A Plastic Rectangular Filter And Cover That Is Used On Desa Heaters Larger Than 70K Btu..
Fits: Reddy, Desa, All-Pro, Remington, Master, Knipco,Dayton,Tsc,, Koehring, John Deere Heaters(M12234, M16545, M1654502, M16545-02).
Features
- M16545FF filter cover & PP217 pump kit and PP214 filter kit for Desa Reddy Remington Master Heaters
- Fits: Reddy, Desa, All-Pro, Remington, Master, Knipco,Dayton,TSC,, Koehring, John Deere Heaters(M12234, M16545, M1654502, M16545-02)
- PINNACLE Filter Cover Part numbers (71-020-1010, 710201010)
- This part #M16545 is a Plastic rectangular filter and cover that is used on Desa heaters larger than 70k BTU.
- If you have any questions about this item, please contact us.We will help you as soon as possible
- See more on Amazon...
Brand: Ganivsor
See On Amazon #20
Ganivsor KW23MH-I Kerosene Heater Wick for MegaHeat HeatMate HMC-23K and 2230 Series(and more), White
Asin: B0CTB7XK4F | Model: KW23MH-I | PartNumber: KW23MH-I
♨Specificities: Kerosene Heater Replacement Wick Is Made Of Cotton And Fiberglass, The Fuel Is Transported From The Tank To The Top Of The Wick By Capillary Action, And The Steam Is Ignited. The Additional Absorbent Foam Base Allows For Consistent Fuel Flow, While The Non-Flammable Fiberglass Top Eliminates The Need For Trimming..
♨Safety First: The Superior Design Of The Kerosene Heater Replacement Wick Combines The Smooth Flow Of Fur And The High-Temperature Burning Surface To Produce A More Complete Combustion Process. Provides Greater Security..
♨Easy To Install: Kerosene Heater Replacement Wick Is Very Easy To Install With Precise Specifications. There Are No Complicated Steps..
♨Product Material: Imported Cotton, Long Lasting Cotton/Fiberglass Construction.
Features
- Compatible with Replacement Wick For the MegaHeat and HeatMate 2230 Series (and many more), for example HeatMate HMC-23K and so on
- Product material: Imported Cotton, Long Lasting Cotton/Fiberglass Construction
- Specificities: Kerosene heater replacement wick is made of cotton and fiberglass, the fuel is transported from the tank to the top of the wick by capillary action, and the steam is ignited. The additional absorbent foam base allows for consistent fuel flow, while the non-flammable fiberglass top eliminates the need for trimming.
- Easy to Install: Kerosene heater replacement wick is very easy to install with precise specifications. There are no complicated steps.
- Safety First: The superior design of the kerosene heater replacement wick combines the smooth flow of fur and the high-temperature burning surface to produce a more complete combustion process. Provides greater security.
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin Parts Shop
Dimensions: 0.30 x 0.30 x 0.30 Inches
See On Amazon #21
Ganivsor NEW F226831 26831 Rotor Kit Mr Heater, Heat Star Kerosene Heaters 50K-210K Fits ALL Mr. Heater & Heat Star Heaters 50,000 thru 210,000 BTU
Asin: B09FXVZHWM
[Fits]: All Mr. Heater & Heat Star Heaters 50,000 Thru 210,000 Btu Kerosene Models.
[Note]: Please Take Care To Check The Model Number To Avoid Unnecessary Trouble. You Can Contact Me If You Have Any Questions.
[Service Guarantee]: Contact Us If You Are Not Satisfied With It For Any Reason. We’Ll Process Full Refund Or Send You A Replacement Without Returning Or Any Additional Conditions. All Issues Will Be Solved Within 24 Hours.
[Size]: 5/8" Thick. Includes All 4 Vanes And Shaft Insert.
Features
- [Part Number]: F226831
- [Size]: 5/8 Thick. Includes all 4 Vanes and Shaft Insert
- [Fits]: ALL Mr. Heater & Heat Star Heaters 50,000 thru 210,000 BTU Kerosene Models
- [Service Guarantee]: Contact us if you are not satisfied with it for any reason. We ll process full refund or send you a replacement without returning or any additional conditions. All issues will be solved within 24 hours
- [NOTE]: Please take care to check the model number to avoid unnecessary trouble. You can contact me if you have any questions
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin parts shop
Weight: 0.15 pounds
See On Amazon #22
Ganivsor F278527 Pilot Assembly Portable ODS for Mr.Heater Big Buddy MH18B MH9B MH9BX and Dewalt Small Propane Heater Parts - 78422 Space Heater Pilot
Asin: B0CMCBYYN1 | Model: F278527 78422 | PartNumber: F278527 78422
♨For Mr.Heater, Heat Star And Enerco Mh9b & Mh9bx Mh18b Buddy Heaters. And Mr Heater: Mh9b(2001-2008), Mh9bx (2009-Current), Heat Star And Enerco Mh18b Buddy Heaters.
♨Pay Attention To Safety When Receiving The Package Or Installing It To Avoid Injuries, Be Careful To Route It So It Is Not Touching Any Metal Pieces. Contact Us If You Have Any Questions!.
♨This Pilot Assembly Easy Installation And Quality Construction, The Wire Insulation On The Replacement Part.
♨This Product Pilot Assembly Compatible Dewalt Small Propane Heater.
Features
- Replaces Part Numbers: 78422 ,F278527, F273401, 73404
- This Product Pilot Assembly Compatible Dewalt Small Propane Heater
- For Mr.Heater, Heat Star and Enerco MH9B & MH9BX MH18B Buddy Heaters. And Mr Heater: MH9B(2001-2008), MH9BX (2009-current), Heat Star and Enerco MH18B Buddy Heaters
- This Pilot Assembly Easy Installation and Quality Construction, The wire insulation on the replacement part
- Pay attention to safety when receiving the package or installing it to avoid injuries, Be careful to Route it so it is not touching any metal pieces. Contact us if you have any questions!
- See more on Amazon...
Brand: Ganivsor
Dimensions: 0.10 x 2.00 x 1.00 Inches
See On Amazon #23
Ganivsor SP-KFA1005 70-054-0100 Air Filter Kit for Pro Temp Heat Hog Remington Mi-T-M heaters 68-3046 70023100 PT125-KFA PT-175-FKA
Asin: B08FJ6HHNB | Ean: 0726756760820 | UPC: 726756760820
For ：Pro Temp, Heathog, Dayton, Workhorse, Current Remington, And Master Mi-T-M.
Pt-45-Kfa, Pt-70-Kfa, Pt125-Kfa, Pt-175-Fka & Pt-215-Fka.
Replaces Part #70-054-0100，700540100,70023100.
Features
- SP-KFA1005 70-054-0100 Air Filter Kit part for Pro Temp Heat Hog Remington Mi-T-M heaters
- Replaces Part #70-054-0100 700540100,70023100
- for Pro Temp, HeatHog, Dayton, WorkHorse, current Remington, and Master Mi-T-M
- PT-45-KFA, PT-70-KFA, PT125-KFA, PT-175-FKA & PT-215-FKA
- See more on Amazon...
Brand: Ganivsor
See On Amazon #24
Ganivsor 3/Pack Replacement GE WS03X10001 Water Filter O-Ring fits Pentek 151121
Asin: B07PHRK1W4 | Ean: 0791270862879 | UPC: 791270862879
Material: Buna-N (Nitrile Butadiene Rubber).
Ace Hardware 45335, 45449, 48166, 49562, 4001699, 4158515.
About Approximately 3.375" Id X 3.75" Od X 0.2" Thickness.
Features
- 3/pack Replacement GE WS03X10001 water Filter O-Ring fits Pentek 151121
- about Approximately 3.375 ID x 3.75 OD x 0.2 Thickness
- Material: Buna-N (nitrile butadiene rubber)
- Ace Hardware 45335, 45449, 48166, 49562, 4001699, 4158515
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin parts shop
See On Amazon #25
Ganivsor PP225 LPG8414 ODS Pilot Assembly for Propane Gas(LP) fireplaces by FMI, Desa, Empire - 103778-01 R3623 14D0473 Fits LP Gas fireplaces and stoves with Thermopile and Thermocouple
Asin: B0CPF5GRTX | Model: 14D0473; pp225 | PartNumber: 14D0473; pp225
♨Fits Models: This Ods Lp Pilot Assembly With Thermopile And Thermocouple Fits Models Vfsr, Civf-25, Civf-25C, Vfh-33M, Vfhs-20R, Vfsr, Vfyr-16, Vfyr-18, Vfyr-24, Vfyr-30, Vfcr-25, Vfhd-32R, Vfhd-36R..
♨Great Quality: Ganivsor Lp Pilot Assembly Replacement For Empire Fmi Is Made Of Good Grade Material. It Has A Sturdy Fixing Bracket, A Premium Copper Pilot Hood, And A Thermocouple With Good Performance, Which Make It Long-Lasting And Durable. Contact Us If You Have Any Questions!.
♨Specifications: Fireplace Pilot Unit For Lpg Gas/Propane Combustion, 750Mv Thermoelectric Reactor, Pilot Burner (0.22 Built-In Fuel Injector, Energy Consumption Approx 166W), End Gas Connection With 3/8-24 Unf Thread. 34" Long Integrated Thermocouple With M8 X 1 Head Connection Nut For Lp Propane Gas Grade..
♨This Ods Lp Pilot Assembly Is Used For Appliances Burning Lpg Gas Only, Pilot Assembly For Their Vent Free Fireplace..
Features
- Replacement Part number: PP225, LPG8414, 103778-01, R3623, 14D0473
- This ODS LP pilot assembly is used for appliances burning LPG gas ONLY, pilot assembly for their vent free fireplace.
- Fits Models: This ODS LP pilot assembly with thermopile and thermocouple fits models VFSR, CIVF-25, CIVF-25C, VFH-33M, VFHS-20R, VFSR, VFYR-16, VFYR-18, VFYR-24, VFYR-30, VFCR-25, VFHD-32R, VFHD-36R.
- Specifications: Fireplace pilot unit for LPG gas/propane combustion, 750mv thermoelectric reactor, pilot burner (0.22 built-in fuel injector, energy consumption approx 166W), end gas connection with 3/8-24 UNF thread. 34 long integrated thermocouple with M8 x 1 head connection nut for LP propane gas grade.
- Great Quality: Ganivsor LP pilot assembly replacement for Empire FMI is made of good grade material. It has a sturdy fixing bracket, a premium copper pilot hood, and a thermocouple with good performance, which make it long-lasting and durable. Contact us if you have any questions!
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin Parts Shop
Dimensions: 0.70 x 0.60 x 0.50 Inches
See On Amazon #26
Ganivsor Kerosene Wick AW4E for Sengoku HMN-110 KeroHeat CTN-110 Heatmate HMN-110 Mega Heat MGN-110, Replacement American Wick #4E
Asin: B0CT8WW1MV | Model: aw4e | PartNumber: aw4e
♨Specificities: Kerosene Heater Replacement Wick Is Made Of Cotton And Fiberglass, The Fuel Is Transported From The Tank To The Top Of The Wick By Capillary Action, And The Steam Is Ignited. The Additional Absorbent Foam Base Allows For Consistent Fuel Flow, While The Non-Flammable Fiberglass Top Eliminates The Need For Trimming..
♨Safety First: The Superior Design Of The Kerosene Heater Replacement Wick Combines The Smooth Flow Of Fur And The High-Temperature Burning Surface To Produce A More Complete Combustion Process. Provides Greater Security..
♨Easy To Install: Kerosene Heater Replacement Wick Is Very Easy To Install With Precise Specifications. There Are No Complicated Steps..
♨Product Dimensions: 6.0" X 6.0" X 9.0".
Features
- Compatible with replacement wick for Sengoku HMN-110, KeroHeat CTN-110, Heatmate HMN-110, Mega Heat MGN-110 (#4308953)
- Product Dimensions: 6.0 x 6.0 x 9.0
- Specificities: Kerosene heater replacement wick is made of cotton and fiberglass, the fuel is transported from the tank to the top of the wick by capillary action, and the steam is ignited. The additional absorbent foam base allows for consistent fuel flow, while the non-flammable fiberglass top eliminates the need for trimming.
- Easy to Install: Kerosene heater replacement wick is very easy to install with precise specifications. There are no complicated steps.
- Safety First: The superior design of the kerosene heater replacement wick combines the smooth flow of fur and the high-temperature burning surface to produce a more complete combustion process. Provides greater security.
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin Parts Shop
Dimensions: 0.30 x 0.30 x 0.30 Inches
See On Amazon #27
Ganivsor 120630-01 Pilot ODS for Desa Glo-Warm Vent Free Natural Gas Wall Heaters - 1500 Watts Pilot ODS Assembly
Asin: B0CMC76W4Q | Model: 120630-01 | PartNumber: 120630-01
♨The 120630-01 Pilot Ods Assembly Take The 120790-01 Dual Wire Thermocouple. The 120790-01 Thermocouple Dual Wire 22.5 Inch Length With Silver And Orange Transmitter Wires That Fits The Desa International Unvented Vent-Free Infrared Gas Wall Heater..
♨We Offer High Quality And Longevity To Ensure That Your Unvented Gas Logs Sets, Wall Heaters And Fireplaces Will Work Properly. Contact Us If You Have Any Questions!.
♨Many Of The Unvented Gas Logs Sets, Wall Heaters And Fireplaces That Used The 120630-01 Pilot Ods Were Made By Desa International And Sold Under Many Different Brand Names Some Of The Brand Names Were Vanguard, Comfort Flame, Glo-Warm, Cozy Heat, Kozy World, Pro Com, Desa International And Others By Lowe's, Ace Hardware, Home Depot, Sears, Menards Store And Other Retailer Throughout North America..
♨Replaces Part Numbers: 503329, 098244-01, 098244-03, 099440-01, 099440-05, 107667-01, 110803-01, J5526. The Right Ods Pilot Assembly Must Be Used For The Correct Model Number Heater..
Features
- The 120630-01 Pilot ODS assembly was used on many of the unvented Natural Gas Gas wall heaters and NG unvented gas log sets and fireplaces.
- Replaces part numbers: 503329, 098244-01, 098244-03, 099440-01, 099440-05, 107667-01, 110803-01, j5526. The right ODS Pilot Assembly must be used for the correct model number heater.
- The 120630-01 Pilot ODS assembly take the 120790-01 Dual Wire Thermocouple. The 120790-01 Thermocouple Dual Wire 22.5 Inch Length with silver and orange transmitter wires that fits the Desa International Unvented Vent-Free infrared gas wall heater.
- Many of the Unvented Gas Logs sets, Wall Heaters and fireplaces that used the 120630-01 Pilot ODS were made by DESA International and sold under many different brand names Some of the Brand Names were Vanguard, Comfort Flame, Glo-Warm, Cozy Heat, Kozy World, Pro Com, Desa International and others by Lowe's, Ace Hardware, Home Depot, Sears, Menards Store and other retailer throughout North America.
- We offer high quality and longevity to ensure that your Unvented Gas Logs sets, Wall Heaters and fireplaces will work properly. Contact us if you have any questions!
- See more on Amazon...
Brand: Ganivsor
Dimensions: 0.20 x 2.00 x 1.00 inches
See On Amazon #28
Ganivsor 104286-01 ODS Pilot Assembly for Wall Heaters Fireplaces Gas Logs Vent Free Heaters by Comfort Glow, Comfort Flame, Desa, FMI, Reddy, Vanguard and Vantage - PP224, LPG8420, L98310-01, J3866
Asin: B0CPDM2H6L | Model: 104286-01 | PartNumber: 104286-01
♨For Vent Free Heaters By Comfort Glow, Comfort Flame, Desa, Fmi, Reddy, Vanguard And Vantage Heart.
♨We Offer High Quality And Longevity To Ensure That Your Wall Heaters Fireplaces Gas Logs And Vent Free Heaters Will Work Properly. Contact Us If You Have Any Questions!.
♨The Right Ods Pilot Assembly Must Be Used For The Correct Model Number Heater..
♨The Lpg8420 Pilot Designs Can Be Used Inside Fmi, Desa, Comfort Glow, Vanguard, Empire Heaters And Fireplaces Can Also Be Used To Replace The Lpg8402..
Features
- Products Replacement Part: 104286-01, PP224, LPG8420, L98310-01, J3866
- The LPG8420 Pilot designs can be used inside FMI, Desa, Comfort Glow, Vanguard, Empire heaters and fireplaces can also be used to replace the LPG8402.
- For vent free heaters by Comfort Glow, Comfort Flame, Desa, FMI, Reddy, Vanguard and Vantage Heart
- The right ODS Pilot Assembly must be used for the correct model number heater.
- We offer high quality and longevity to ensure that your Wall Heaters Fireplaces Gas Logs and Vent Free Heaters will work properly. Contact us if you have any questions!
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin Parts Shop
Dimensions: 0.30 x 0.50 x 0.50 Inches
See On Amazon #29
Ganivsor PP204FK 1/2" Rotor kit & PP214 Filter Kit Replacement for Desa Master Reddy Sears Space Heaters Parts #70-022-0100
Asin: B09FF1WV9B
Fits: Desa Brands Dayton, Master, Knipco, Koehring, Master, Reddy, Remington, Sears, Tsc Heaters Parts.
Please Try To Find The Suitable Model Carefully To Avoid The Problem Of Mismatch After Purchase. Please Feel Free To Contact Us!.
This Kit Includes Everything Shown In The Photo, A Pp204 Rotor Kit, And A Pp214 Filter Kit.
Rotor Kit 1/2" Thick Dia= 2 1/8", Desa Part# Pp204, Ghp Part#Sp-Kfa1000, Mi-T-M Part# 68-3043, Pinnacle Part# 70-022-0100;Pp214 Ha3017 Air Filter Kit #71-054-0300.
Features
- PP204, 1/2" Rotor Kit and PP214 Filter Kit
- Rotor Kit 1/2 Thick Dia= 2 1/8, Desa part# PP204, GHP part#SP-KFA1000, Mi-T-M part# 68-3043, Pinnacle part# 70-022-0100;PP214 HA3017 Air Filter Kit #71-054-0300
- Fits: DESA Brands Dayton, Master, Knipco, Koehring, Master, Reddy, Remington, Sears, TSC Heaters Parts
- This kit includes everything shown in the photo, A PP204 rotor kit, and a PP214 filter kit
- Please try to find the suitable model carefully to avoid the problem of mismatch after purchase. Please feel free to contact us!
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin parts shop
See On Amazon