DIYmalls - Buying Guide
Last Updated: 06/04/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
DIYmall 2 Sets 915MHZ ESP32 Lora V3 WiFi+BLE Development Board 0.96inch OLED Display ESP32-S3 Dual-core SX1262 Type-C Lora Kit for Arduino NodeMCU IoT
Asin: B08629526P | Model: FZ2886-AX2K | PartNumber: FZ2886-AX2K
The Mcu Is Different, So The Definitions Of V2 And V3 Gpio Pins Are Different.
What You Will Get: 2 X Esp32 Lora V3 Development Board + 2 X 915Mhz Antenna + 2 X Jst 1.25Mm-2P Connector Cable + 2.54 Pin (No Welding) + 2 X Protective Case For Lora Board.
When You Use Esp32 Oled Lora, You Need To Use 2Pcs Together. One Is Used For Receiving And Another For Sending.
It Is The Best Option For Smart Cities, Farms, Homes, Industrial Control, House Security, Wireless Meter Reading, And Iot Developers.
Upgraded V3 Version Has Better Impedance Matching Of Rf Circuits.
Mcu: Esp32-S3fn8 (V2 Is Esp32-D0wdq6), Lora Chip: Sx1262(V2 Is Sx1276/8), Usb Socket: Type-C(V2 Is Micro-Usb).
Features
- WiFi LoRa 32 is a classic IoT dev-board. The newly launched V3 version retains Wi-Fi, BLE, LoRa, OLED display, and other functions
- MCU: ESP32-S3FN8 (V2 is ESP32-D0WDQ6), LoRa Chip: SX1262(V2 is SX1276/8), USB Socket: Type-C(V2 is Micro-USB)
- The MCU is different, so the definitions of V2 and V3 GPIO pins are different
- Upgraded V3 version has better impedance matching of RF circuits
- When you use esp32 oled lora, you need to use 2pcs together. One is used for receiving and another for sending
- It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers
- What you will get: 2 X ESP32 Lora V3 development board + 2 X 915MHz Antenna + 2 X JST 1.25mm-2P Connector cable + 2.54 pin (no welding) + 2 X Protective Case for lora board
- See more on Amazon...
Brand: DIYmall | Manufacturer: Heltec Automation Technology Co., Ltd
Dimensions: 0.38 x 1.97 x 1.00 inches
See On Amazon #2
DIYmalls 915MHz ESP32 LoRa OLED Board V3 SX1262 Type-C + LoRa V3 Case + 915MHz Antenna for Arduino LoRawan IOT (Pack of 2), not Compatible with LoRa V2
Asin: B0BL7B47DR
-The Lora Case Has A Strict Requirement In Size Of Lora Antenna Fitting With It. It Means Not All Antenna Is Suitable For It..
-You Will Receive 2Pcs 915Mhz Esp32 Lora Oled Board V3 With 1.25Mm-2P Cable, 2Pcs Lora V3 Case, And 2Pcs 915Mhz Lora Antenna..
-If You Have Any Problem, Please Do As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
-Lora Oled Board V3 Comes Unassembled, Soldering Required By You, Not Equipped With Lithium Battery..
-You Can Power Lora V3 Board Via 3.7V Lithium Battery, 3.3V / 5V Pin, Or On-Board Type C 5V. To Make It Work Better, Type C 5V Power Is Recommended..
Features
- -ESP32 LoRa V3 is not compatible with the LoRa 32 V2. The lora case is only designed for lora v3 board.
- -You can power lora v3 board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, type C 5V power is recommended.
- -The lora case has a strict requirement in size of lora antenna fitting with it. It means not all antenna is suitable for it.
- -LoRa oled board v3 comes unassembled, soldering required by you, not equipped with lithium battery.
- -You will receive 2pcs 915MHz esp32 lora oled board V3 with 1.25mm-2p cable, 2pcs lora v3 case, and 2pcs 915mhz lora antenna.
- -If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: Heltec Automation
Warranty: 30 days
See On Amazon #3
DIYmalls 915 ESP32 LoRa OLED Board V3 Type-C SX1262 + 915MHz LoRa Antenna U.FL IPEX to SMA for Arduino IOT LoraWan Gateway, not Compatible with LoRa 32 V2
Asin: B086ZFCV7F | Ean: 0747356634250 | UPC: 747356634250
You Will Receive, 1Pcs 915Mhz Esp32 Lora V3, 1Pcs 915Mhz Lora Antenna,And 1Pcs 2Pin 1.25Mm Connector..
Lora 32 V2 Use Esp32-D0wdq6 Mcu, But The V3 Is Esp32-S3fn8, So Pinout Is Different. The Apis Used With The Libraries Are Different, So Programs Written For V2 Do Not Compile V3..
Support Type-A To Type-C Cable Only, Not Type-C To Type-C Cable..
Lora V3 Board Are An Improvement Over The V2 Version, But They Are Not A Replacement..
When You Use Lora Esp32 915Mhz, You Need To Use 2Pcs Together,One Receiving And Another Sending..
Features
- This LoRa board comes unassembled, soldering is required, not equipped with lithium battery.
- When you use lora esp32 915MHz, you need to use 2pcs together,one receiving and another sending.
- You will receive, 1pcs 915MHz esp32 lora V3, 1pcs 915mhz lora antenna,and 1pcs 2pin 1.25mm connector.
- LoRa V3 board are an improvement over the V2 version, but they are not a replacement.
- LoRa 32 V2 use ESP32-D0WDQ6 MCU, but the V3 is ESP32-S3FN8, so pinout is different. The APIs used with the libraries are different, so programs written for V2 do not compile V3.
- Support type-A to type-C cable only, not type-C to type-C cable.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Weight: 0.05 pounds
See On Amazon #4
DIYmall 2.8'' ESP32 Module ESP32-2432S028R WiFi+BT Dual-core 240X320 Smart Display Screen LCD TFT Module ILI9341 Driver for Arduino IoT
Asin: B0BVFXR313
It Can Customize The App Control Module And Interface, Which Is Very Suitable For Making An App Interface That Meets Its Own Requirements.
Application: Home Smart Device Image Transmission, Wireless Monitoring, Smart Agriculture Qr Wireless Recognition, Wireless Positioning System Signal, And Other Iot Applications.
Support: ①Uart/Spi/I2c/Pwm/Adc/Dac And Other Interfaces②ov2640 And Ov7670 Cameras, Built-In Flash③picture Wifi Upload④tf Card⑤multiple Sleep Modes⑥embedded Lwip And Freertos⑦sta/Ap/Sta+Ap Working Mode⑧smart Config⑨airkiss One-Click Network Configuration⑩secondary Development.
Real Lnternet Of Things Development Tool With A Control-Lable Display Screen, Which Can Be Used For App Remote Control, Remote Environmental Data Collection, Remote Data Fusion, Remote Parameter Setting And Other Lot Development Applications.
Features
- ESP32-2432S028 development board is based on the ESP32-DOWDQ6 controller, low-power, dual-core CPU, clock frequency up to 240MHZ, integrates a wealth of resource peripherals, high-speed SDIO,SPI, UART and other functions
- Real lnternet of Things development tool with a control-lable display screen, which can be used for APP remote control, remote environmental data collection, remote data fusion, remote Parameter setting and other loT development applications
- It can customize the app control module and interface, which is very suitable for making an app interface that meets its own requirements
- Support: UART/SPI/I2C/PWM/ADC/DAC and other interfaces OV2640 and OV7670 cameras, built-in flash picture WiFI upload TF card multiple sleep modes Embedded Lwip and FreeRTOS STA/AP/STA+AP working mode Smart Config AirKiss one-click network configuration secondary development
- Application: Home smart device image transmission, Wireless monitoring, Smart agriculture QR wireless recognition, Wireless positioning system signal, And other IoT applications
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
See On Amazon #5
DIYmalls 915MHz LoRa ESP32 OLED Board V3 Type-C SX1262 8MB Flash + LoRa Antenna U.FL IPEX to SMA for Arduino LoraWan IOT (Pack of 2), not Compatible with LoRa 32 V2
Asin: B086ZG25DZ | Ean: 0747356634243 | UPC: 747356634243
-Lora Board 915Mhz Comes Unassembled, Soldering Required By You, Not Equipped With Lithium Battery..
-If You Want To Use The Lora 32 V3 Board With Case, Please Buy Another Smaller 915 Lora Antenna Because This Lora 915 Antenna Is Bigger Than The Lora Case..
-You Can Power 915 Lora Board Via 3.7V Lithium Battery, 3.3V / 5V Pin, Or On-Board Type C 5V. To Make It Work Better, Type C 5V Power Is Recommended..
-The Newly Lora V3 Version Has The Same Pin Sequence And Function As The V2 Version. But The V3 Change Micro Usb Port To Be Type C..
Features
- -You will receive, 2pcs 915MHz esp32 lora V3, 2pcs 915mhz lora antenna,and 2pcs 2pin 1.25mm connector.
- -The newly LoRa V3 version has the same pin sequence and function as the V2 version. But the V3 change micro USB port to be type C.
- -LoRa board 915mhz comes unassembled, soldering required by you, not equipped with lithium battery.
- -You can power 915 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, type C 5V power is recommended.
- -If you want to use the lora 32 v3 board with case, please buy another smaller 915 lora antenna because this lora 915 antenna is bigger than the lora case.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Dimensions: 0.80 x 1.90 x 1.20 inches | Weight: 0.10 pounds
See On Amazon #6
DIYmalls 915 MHz ESP32 OLED LoRa V3 Board SX1262 + Protective LoRa Case Cover + 915 LoRa Antenna for Arduino Meshtastic LoraWan IOT (Pack of 2)
Asin: B09N8HZLTB
-This 915Mhz Lora Board Comes Unassembled, Soldering Is Required For You, Not Equipped With Lithium Battery..
-0.96 Oled Is Mounted On Esp32 Lora Board Via 4 Screws, So It Is Removable But Pls Be Careful To Do It To Avoid Damage..
-You Will Receive 2Pcs 915Mhz Esp32 Lora Board V3, 2Pcs Lora Case For It, 2Pcs Lora Antenna 915Mhz, And 2Pcs 1.25Mm Connector Cable..
-When You Use This 915Mhz Oled Wifi Lora 32 Board, You Need To Use 2Pcs Together,One For Receiving Data And Another Sending..
-The Lora Case Has A Strict Requirement In Size Of Lora Antenna Fitting With It. It Means Not All Antennas Working With It..
Features
- -The gray lora antenna is small, so it can be put into the white lora case. But other big 915 antennas can not be used with lora board when lora case installed.
- -The lora case has a strict requirement in size of lora antenna fitting with it. It means not all antennas working with it.
- -This 915MHz LoRa board comes unassembled, soldering is required for you, not equipped with lithium battery.
- -When you use this 915MHz oled wifi lora 32 board, you need to use 2pcs together,one for receiving data and another sending.
- -0.96 oled is mounted on esp32 lora board via 4 screws, so it is removable but pls be careful to do it to avoid damage.
- -You will receive 2pcs 915MHz esp32 lora board V3, 2pcs lora case for it, 2pcs lora antenna 915mhz, and 2pcs 1.25mm connector cable.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Warranty: 30 days
See On Amazon #7
915MHz ESP32 LoRa OLED Development Board V3 SX1262 Type-C + LoRa Antenna for Arduino LoraWan IOT Internet of Thing (Pack of 2), not Compatible with LoRa V2
Asin: B07HJ49VN8 | Ean: 0747356629140 | UPC: 747356629140
0.96 Oled Is Mounted On Esp32 Lora Board Via 4 Screws, So It Is Removable But Pls Be Careful To Do It To Avoid Damage..
The 915 Lora Antenna Is A Little Big. If You Want To Use The Lora V3 Board With Case, You Need To Buy Another Small Lora Antenna.
You Will Receive, 2Pcs Lora Oled Board 915Mhz New Version V3, And 2Pcs 915Mhz Lora Antenna..
When You Use Esp32 Oled Lora, You Need To Use 2Pcs Together. One Is Used For Receiving And Another For Sending.
Features
- The esp32 lora 915mhz comes unassembled, soldering is required, not equipped with lithium battery.
- When you use esp32 oled lora, you need to use 2pcs together. One is used for receiving and another for sending
- 0.96 oled is mounted on esp32 lora board via 4 screws, so it is removable but pls be careful to do it to avoid damage.
- You will receive, 2pcs lora oled board 915mhz new version V3, and 2pcs 915mhz lora antenna.
- The 915 lora antenna is a little big. If you want to use the lora v3 board with case, you need to buy another small lora antenna
- See more on Amazon...
Brand: NEXTION | Manufacturer: DIYmalls
Dimensions: 0.80 x 1.90 x 1.20 inches | Weight: 0.10 pounds
See On Amazon #8
DIYmalls 915MHz LoRa V3 LoRa32 ESP32 OLED Board + 915 MHz LoRa Antenna + LoRa Case Ensosure Cover for Meshtastic, not Compatible with Heltec LoRa 32 V2
Asin: B09LV653X8
-The Lora Case Has A Strict Requirement In Size Of Lora Antenna Fitting With It, So It Means Not All Antenna Is Suitable For It..
-If You Have Any Problem, Please Do As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
-You Will Receive 1Pcs 915Mhz Esp32 Lora V3 Board With Pin Headers Not Soldered, 1Pcs 1.25Mm-2P Cable, 1Pcs Lora V3 Case, And 1Pcs 915Mhz Lora Antenna..
-You Can Power Lora V3 Board Via 3.7V Lithium Battery, 3.3V / 5V Pin, Or On-Board Type C 5V. To Make It Work Better, Type C 5V Power Is Recommended..
Features
- -When you use lora esp32 915MHz, you need to use 2pcs together,one receiving and another sending.
- -You can power lora v3 board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, type C 5V power is recommended.
- -The lora case has a strict requirement in size of lora antenna fitting with it, so it means not all antenna is suitable for it.
- -You will receive 1pcs 915MHz esp32 lora V3 board with pin headers NOT soldered, 1pcs 1.25mm-2p cable, 1pcs lora v3 case, and 1pcs 915mhz lora antenna.
- -If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Warranty: 30 days
See On Amazon #9
DIYmall 2pcs 915MHz LoRa32 V3 ESP32 S3 WiFi+BT Development Board with 5DBi LoRa Antenna 0.96" OLED Display SX1262 LoRa Kit forMeshtastic IoT
Asin: B0CY1XKZQC
Onboard Sh1.25-2 Battery Interface, Support 3.7V Lithium Battery To Power, Lithium Battery Not Inlcuded, Recommended For Type C 5V Power.
What You Will Get: 2 X Esp32 Lora V3 Oled Development Board + 2 X 915Mhz Lora Antenna With U.Fl/Ipex To Sma Connector Cable + 2 X Jst 1.25Mm-2P Connector + 2.54 Pin ( No Soldering, Soldering Required ).
It Is The Best Option For Smart Cities, Farms, Homes, Industrial Control, House Security, Wireless Meter Reading, And Iot Developers.
Mcu: Esp32-S3, Lora Chip: Sx1262, Usb Socket: Type-C.
Features
- LoRa + WIFI + BLE + OLED display classic IoT dev-board, perfect for-Meshtastic LoRaWAN
- MCU: ESP32-S3, LoRa Chip: SX1262, USB Socket: Type-C
- Onboard SH1.25-2 battery interface, support 3.7V lithium battery to power, lithium battery not inlcuded, recommended for type C 5V power
- It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers
- What you will get: 2 X ESP32 Lora V3 OLED development board + 2 X 915MHz LoRa Antenna with U.FL/IPEX to SMA Connector Cable + 2 X JST 1.25mm-2P Connector + 2.54 pin ( NO soldering, soldering required )
- See more on Amazon...
Brand: DIYmall | Manufacturer: Heltec Automation Technology Co., Ltd
See On Amazon #10
DIYmalls 915MHz ESP32 LoRa V3 LoRa32 OLED Development Board + 915 MHz LoRa Antenna for Meshtastic (Pack of 2), not Compatible with LoRa 32 V2
Asin: B0CW62KK5N
-You Can Power 915 Lora Board Via 3.7V Lithium Battery, 3.3V / 5V Pin, Or On-Board Type C 5V. To Make It Work Better, 5V Type C Power Is Recommended..
-If You Have Any Question, Please Confirm It With Diymalls As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
-It Comes Without The Case For Lora V3, But The 915 Antenna Is Suitable For Lora V3 Case. You Can Find The Lora Case In Diymalls Store Via Searching B0br3mq9bg.
-Lora V3 Board 915Mhz Comes Unassembled, Soldering Required By You, Not Equipped With 3.7V Lithium Battery As Well..
Features
- -You will receive, 2pcs 915 MHz esp32 lora V3, 2pcs 915mhz lora antenna,and 2pcs 2pin 1.25mm cable.
- -LoRa v3 board 915mhz comes unassembled, soldering required by you, not equipped with 3.7v lithium battery as well.
- -You can power 915 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, 5V type C power is recommended.
- -It comes without the case for lora v3, but the 915 antenna is suitable for lora v3 case. You can find the lora case in DIYmalls store via searching B0BR3MQ9BG
- -If you have any question, please confirm it with DIYmalls as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: Heltec Automation
Warranty: 30 days
See On Amazon