Camoo - Buying Guide
Last Updated: 06/06/2024
Share on
Bestselling from Camoo on Amazon
- Camoo Polymer Propeller Wrench 1-1/16" Nut Wrench For Mercury/Mercruiser/Alpha Replaces 91-859046Q4 ...
- for Yamaha Engine Interface Cable NMEA2000 Connection with T Connector for Yamaha 2006 & Newer, Repl...
- Lower Unit Gear Oil Pump Kit with 8 mm/10 mm Generic Adapter, Manual Standard Quart Bottle Gear Lube...
- MJ-1-DP Jack Plate 4'' Setback Small Engine Jack Plate for Outboard Motors Up to 35HP (Wooden Mounti...
- Eliminator Trolling Motor Prop Nut Custom Fit For MinnKota 80, 101 and 112 lb Models (Black)
- Prop Nut Kit E MKP-34 For Minn Kota Shear Pin Compatible with Minn Kota Trolling Motor MKP-33 Weedle...
- Camoo TSP-1 & TSP-2DP Transom Support Plate Kit for Top Bolt Holes Standard and Lower Bolt Holes Sta...
- 010-10603-00 Marine Network Cable Connector, Fit for Garmin Marine Radar Devices RJ45 Male Cable End...
- Lifting Adapter, Compatible for Yamaha 5.3 V8, 4.2 V6, F200B, F115B, F425, MT0025, MT0022 and Non-Ve...
- Mounting Bracket Suits Mark Elite Hook 3 4 5 TI5 TI7 Part#: 000-10027-001
#1
Camoo Polymer Propeller Wrench 1-1/16" Nut Wrench For Mercury/Mercruiser/Alpha Replaces 91-859046Q4 Light Weight, Yellow, Rustproof Plastic (27mm)
Asin: B08VN229N4 | Ean: 0641197108911 | UPC: 641197108911
Nice Design -- Yellow - High Visible Color, Allows For Easy Location In Dark Boat Storage Areas. Built In Pin - Bending For Mercury Tab Washer Is Easy With A Built In Pin. Light Weight - Great Tool To Have On Board Or In The Truck For Emergencies..
Satisfaction Guarantee -- If You Are Not Satisfied With Camoo Products, Simply Asked Money Back Guarantee With 12 Months Warranty. No Worry About Buying!.
Material -- Made Of Non-Corrosive Durable Fiber Reinforced Plastic. Resistant To Fuel, Sun, Salt Water And Other Chemicals..
Function -- For 1-1/16" Prop Nut Installation And Removal. Easier To Remove The Propeller Nut On Your Outboard Engine Or Sterndrive With This Quality Propeller Wrench..
Features
- APPLICATION -- Fits propellers with a 1-1/16 nut. Will work for Mercury Mariner -75-250hp/Mercruiser, Alpha, Bravo One/Evinrude, Johnson -V4-45-140hp (4" gear case)/Evinrude, Johnson - V6-V8 - 150-300hp (4'' gear case)/Cobra, for Volvo SX - All/Yamaha Outboards - T50-250hp/Yamaha stern drives - All/for Nissan, Tohatsu -70-140hp/Suzuki - DF60-225hp/Honda - 75-225hp.
- FUNCTION -- For 1-1/16 prop nut installation and removal. Easier to remove the propeller nut on your outboard engine or sterndrive with this quality propeller wrench.
- NICE DESIGN -- Yellow - High visible color, allows for easy location in dark boat storage areas. Built in pin - Bending for Mercury tab washer is easy with a built in pin. Light weight - Great tool to have on board or in the truck for emergencies.
- MATERIAL -- Made of non-corrosive durable fiber reinforced plastic. Resistant to fuel, sun, salt water and other chemicals.
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply asked money back guarantee with 12 months warranty. No worry about buying!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Weight: 0.55 pounds
See On Amazon #2
for Yamaha Engine Interface Cable NMEA2000 Connection with T Connector for Yamaha 2006 & Newer, Replace # 000-0120-37, 3004.6865-4.5 m (15 ft)
Asin: B0BR3Q2TVK | Model: # 000-0120-37, # 3004.6865 | PartNumber: # 000-0120-37, # 3004.6865
Advantage -- With This Cable Contected, You Will Be Able To Display The Following Data: Rpm, Alternator Voltage, Engine Hours, Engine Temperature, Fuel Pressure, Fuel Rate, Oil Pressure, Trim, Water Pressure...
Nmea 2000 -- Requires Nmea 2000 Network. Add Nmea 2000 Starter Kit If A Network Is Not Already Installed. Outputs: For Yamaha 4-Stroke 50-250, 2-Stroke Hdpi 150-350..
Satisfaction Guarantee -- If You Are Not Satisfied With Camoo Products, Simply Asked Money Back Guarantee With 12 Months Warranty. No Worry About Buying!.
Kit Includes -- Kit Contains 15' Engine Interface Cable, And T-Connector To Connect To A New Or Existing Nmea 2000 Network..
A Must Have -- Connects For Yamaha Engines Without Commandlink Plus System. Engine Interface Cable Designed For Yamaha Outboard Engine Connects To Nmea 2000 Networks For Engine Data Display..
Features
- APPLICATION -- Suitable for NMEA 2000 Compliant Units. For Yamaha [2006 & newer]: F50, T50, F60, T60, F75, F90, F115, LF115, F150, LF150, F200, LF200, F225, F225, F250, LF250. [2006 & newer]: Z150, LZ150, VZ150, Z175, Z200, LZ200, VZ225, Z250, LZ250, VZ250, Z300, LZ300, VZ300.
- A MUST HAVE -- Connects for Yamaha engines without CommandLink Plus system. Engine Interface Cable designed for Yamaha outboard engine connects to NMEA 2000 networks for engine data display.
- ADVANTAGE -- With this cable contected, you will be able to display the following data: RPM, Alternator Voltage, Engine Hours, Engine Temperature, Fuel Pressure, Fuel Rate, Oil Pressure, Trim, Water Pressure..
- KIT INCLUDES -- Kit contains 15' Engine Interface cable, and T-connector to connect to a new or existing NMEA 2000 network.
- NMEA 2000 -- Requires NMEA 2000 network. Add NMEA 2000 starter kit if a network is not already installed. Outputs: for Yamaha 4-stroke 50-250, 2-stroke HDPI 150-350.
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply asked money back guarantee with 12 months warranty. No worry about buying!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
See On Amazon #3
Lower Unit Gear Oil Pump Kit with 8 mm/10 mm Generic Adapter, Manual Standard Quart Bottle Gear Lube Fluid Transfer Pump, Fit for Mercury/Marine & more Outboards
Asin: B0BR6F2YBZ | Model: DEE0950 | PartNumber: DEE0950
【Fitment】Compatible With Standard Quart Lube Bottles Manual Pump With 8 Mm/10 Mm Adapters Fits For Mercury And Mariner & More Outboards Lower Unit Gear Oil Transfer (Not For Red Line Oil Pump). 8Cc Gear Lube Fill Manual Pump To Change Gear Lube On Your Inboard/Outboard Motor..
【Satisfaction Guarantee】Camoo Aims To Provide Excellent Products And The Best Customer Service. You Can Return It If You Are Not Satisfied With The Product. We Support 30 Days Full Refunds For Returns And A 1-Year Warranty..
【Ideal Refill Lube Tool 】 A Quick, Easy, And Clean Way To Change Marine Lower Unit Gear Lube For Do-It-Yourself Owners.8Cc Per Stroke Manual Pump Perfectly Refills The Marine Motor Lower Unit In A Few Minutes..
【Universal Drain Holes Adapters】3/8"-16 Swivel Adapter Will Fit Most Domestic-Made Outboards With A 3/8" Lower Unit Drain Hole (Not Fit For Volvo Penta).8Mm And 10Mm- Male Adapters Can Be Covered Most Japan-Made Outboards. No Further Screwing Tools Are Required, They Could Be Easily Screwed Tight Into The Drain Hole..
Features
- For Standard Quart Reliable manual transfer gear oil fluid pump fits for most marine outboards lower unit. Perfect for most standard quart gear oil bottles. (NO FIT for RED LINE BOTTlE). 2 different flexible oil-fill tubes for totally reaching the end of gear lube bottles.
- Universal Drain Holes Adapters 3/8-16 swivel adapter will fit most domestic-made outboards with a 3/8 lower unit drain hole (Not fit for VOLVO PENTA).8mm and 10mm- male adapters can be covered most Japan-made outboards. No further screwing tools are required, they could be easily screwed tight into the drain hole.
- Fitment Compatible with Standard Quart Lube Bottles Manual Pump with 8 mm/10 mm Adapters Fits for Mercury and Mariner & More Outboards Lower Unit Gear Oil Transfer (Not for red line oil pump). 8cc gear lube fill manual pump to change gear lube on your inboard/outboard motor.
- Ideal Refill Lube Tool A quick, easy, and clean way to change marine lower unit gear lube for do-it-yourself owners.8cc per stroke manual pump perfectly refills the marine motor lower unit in a few minutes.
- Satisfaction Guarantee Camoo aims to provide excellent products and the best customer service. You can return it if you are not satisfied with the product. We support 30 days full refunds for returns and a 1-year warranty.
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Warranty: False
See On Amazon #4
MJ-1-DP Jack Plate 4'' Setback Small Engine Jack Plate for Outboard Motors Up to 35HP (Wooden Mounting Block Included) Manual Add Distance Between Engine and Transom
Asin: B0C23HF5FQ | Model: MJ-1-DP | PartNumber: MJ-1-DP
Function -- Extends 4" Off Transom. Small Boat That Made For Short Shaft Outboard Engine Equipped With A Long Shaft Engine Which Results In Not Optimal Performance And Handling. This Jack Plate Is Designed To Firmly Attach To The Transom And Provides A Higher Mounting Position For The Engine..
4" Setback -- The Jack Plate Extends 4" Off Transom. Engine Mounting Surface Is 11-1/2" X 10", 4" Setback And 3" Vertical. Width Of Transom Mounting Flanges Is 17". Max Weight Capacity: 150 Lbs..
Satisfaction Guarantee -- If You Are Not Satisfied With Camoo Products, Simply Return It For A Full Refund In 30 Days. Guarantee With 12 Months Warranty. No Worry About Buying!.
Benefits -- Improves Performance And Handling Of Smaller Or Lighter Boats. Allows Long Shaft Motors Mount To Shorter Shaft Transom Boats..
Wooden Block Included -- Same As Mj-1-Dp Jack Plate, Wooden Block Model # Wood0002. Jack Plate Comes With Pre-Cut And Pre-Grooved Wood Block For A Perfect Fit. Ensure More Firm And Reliable Installation Of The Motor..
Features
- APPLICATION -- Designed for clamp-on outboard motors up to 35 HP. Suitable for skiffs, aluminum boats, and inflatables.
- WOODEN BLOCK INCLUDED -- Same as MJ-1-DP Jack Plate, Wooden Block Model # WOOD0002. Jack plate comes with pre-cut and pre-grooved wood block for a perfect fit. Ensure more firm and reliable installation of the motor.
- FUNCTION -- Extends 4 off transom. Small boat that made for short shaft outboard engine equipped with a long shaft engine which results in not optimal performance and handling. This jack plate is designed to firmly attach to the transom and provides a higher mounting position for the engine.
- BENEFITS -- Improves performance and handling of smaller or lighter boats. Allows long shaft motors mount to shorter shaft transom boats.
- 4 SETBACK -- The jack plate extends 4 off transom. Engine mounting surface is 11-1/2 x 10, 4 Setback and 3 Vertical. Width of transom mounting flanges is 17. Max weight capacity: 150 lbs.
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Warranty: 12 months warranty
See On Amazon #5
Eliminator Trolling Motor Prop Nut Custom Fit For MinnKota 80, 101 and 112 lb Models (Black)
Asin: B0887Z8V3F | Ean: 0641197080613 | UPC: 641197080613
Nice Design -- Built-In Cooling Ports Reduce The Operating Temperature For Longer Battery And Trolling Motor Life..
Top Quality -- Manufactured From 6061 Billet Aluminum. Anodized Finish For Corrosion-Resistant. Using Top Of The Line Machining And Measuring Equipment To Ensure Each Part Is Manufactured To Oem Quality Standards And Specifications..
Satisfaction Guarantee -- If You Are Not Satisfied With Camoo Products, Simply Asked Money Back Guarantee With 12 Months Warranty. No Worry About Buying!.
Easy Installation -- No Tools Needed. 1. Remove The Existing Prop Nut And Washer, 2. Hand-Tighten The Eliminator Till It’S Firmly Pressed Against The Face Of The Prop..
Function -- Reduce Prop Noise And Vibration. Design With A Wider Contact Area To Stabilizes The Propeller. Install This Eliminator Prop Nut Will Help Your Trolling Motor Perform Quieter, Better And Longer..
Features
- APPLICATION -- Suitable for MinnKota 80, 101 and 112 lb models. Replace # GFEL-MK-BK-DP. ( NOTE: For Minn Kota Maxxum and for Terrova trolling motors will require a for Weedless Wedge 2 or 3 prop to use our Eliminator. )
- FUNCTION -- Reduce prop noise and vibration. Design with a wider contact area to stabilizes the propeller. Install this Eliminator Prop Nut will help your trolling motor perform quieter, better and longer.
- NICE DESIGN -- Built-in cooling ports reduce the operating temperature for longer battery and trolling motor life.
- EASY INSTALLATION -- No tools needed. 1. Remove the existing prop nut and washer, 2. Hand-tighten the Eliminator till it s firmly pressed against the face of the prop.
- TOP QUALITY -- Manufactured from 6061 Billet Aluminum. Anodized finish for Corrosion-Resistant. Using top of the line machining and measuring equipment to ensure each part is manufactured to OEM quality standards and specifications.
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply asked money back guarantee with 12 months warranty. No worry about buying!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
See On Amazon #6
Prop Nut Kit E MKP-34 For Minn Kota Shear Pin Compatible with Minn Kota Trolling Motor MKP-33 Weedless Wedge 2 Props Including Prop Nuts & Washers 1865019
Asin: B086VG2QZ2 | Model: MKP-34 Prop & Nut Kit E | PartNumber: MKP-34 Prop & Nut Kit E | Ean: 7427046761017
Function -- With This Kit, You Will Be Able To Quickly & Easily Remove Or Replace Your Prop. A Must Have Kit..
Satisfaction Guarantee -- If You Are Not Satisfied With Camoo Products, Simply Return It For A Full Refund In 30 Days. Guarantee With 12 Months Warranty. No Worry About Buying!.
Kit Includs -- Mkp-34 Prop & Nut Kit E Includes 2 X Prop Nuts (2093101 3/8"-24), 2 X Large Shear Pins (2262658 1" X 3/16") And 2 X Washers (2091701). Note: A Crescent Wrench Is Required For Installation..
Model -- Mkp-34 Prop Nut Kit - E, Replace# 1865019..
Features
- APPLICATION -- Compatible with Minn Kota Props: MKP-33 Weedless Wedge 2 Props for 4" diameter motors (part number 233160 / 1865018).
- MODEL -- MKP-34 Prop Nut Kit - E, Replace# 1865019.
- FUNCTION -- With this kit, you will be able to Quickly & Easily remove or replace your prop. A must have kit.
- KIT INCLUDS -- MKP-34 Prop & Nut Kit E includes 2 X Prop nuts (2093101 3/8-24), 2 X Large shear pins (2262658 1 x 3/16) and 2 X Washers (2091701). Note: A crescent wrench is required for installation.
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Warranty: 12 months warranty
See On Amazon #7
Camoo TSP-1 & TSP-2DP Transom Support Plate Kit for Top Bolt Holes Standard and Lower Bolt Holes Standard (12" x 2" & 15" X 2"), 3/8" Thickness Cast Aluminum, 2 Pack
Asin: B09MTGZP4B | Model: TSP-1 (3001.8067), TSP-2DP | PartNumber: TSP-1 (3001.8067), TSP-2DP
Function -- Helps Distributes The Stress Of The Outboard Engine Mounting Bolts To Protect The Transom. Prolong Lifespan Of Your Transom When Used With Today's Heavy 4-Stroke Outboard Engines..
Satisfaction Guarantee -- If You Are Not Satisfied With Camoo Products, Simply Return It For A Full Refund In 30 Days. Guarantee With 12 Months Warranty. No Worry About Buying!.
Material -- Manufactured From High Quality Cast Aluminum To Serve You For Years To Come. Cnc Machined For A Perfect Fit..
Size -- [ Tsp-1 ]: 15" X 2", 3/8" Thickness, [ Tsp-2-Dp ]: 12" X 2", Holes 10", 3/8" Thickness. Package Includes 2 Transom Support Plates For Top & Lower Bolt Holes- Standard..
Features
- APPLICATION -- TSP-1 fits for Top Bolt Holes- Standard, TSP-2-DP fits for Lower Bolt Holes- Standard. Will perfectly match the universal outboard mounting pattern used by all major manufacturers.
- SIZE -- [ TSP-1 ]: 15 X 2, 3/8 Thickness, [ TSP-2-DP ]: 12 X 2, Holes 10, 3/8 Thickness. Package includes 2 Transom Support Plates for Top & Lower Bolt Holes- Standard.
- Function -- Helps distributes the stress of the outboard engine mounting bolts to protect the transom. Prolong lifespan of your transom when used with today's heavy 4-Stroke outboard engines.
- Material -- Manufactured from high quality Cast Aluminum to serve you for years to come. CNC machined for a perfect fit.
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
See On Amazon #8
010-10603-00 Marine Network Cable Connector, Fit for Garmin Marine Radar Devices RJ45 Male Cable Ends 2-Pack
Asin: B0CQYGMHK7
【Rugged Pvc Outer】 010-10603-00 Network Cable Connector With Upgraded Thick Pvc Outer Sheath, Excellent Waterproof And Uv Resistant. Strain Relief For Maximum Design Flexibility Ensures The Connecter's Lasting Durability Under The Frequently Flexible Bend..
【Compatibility】Rj45 Marine Network Cable Connector, Widely Used On Garmin Radar Device Models: Uhd 75Cv /Uhd 75Sv /Uhd 95Sv / Ultra 105Sv / Ultra 125Sv / Gmr 1224 Xhd2 / Gmr 1226 Xhd2 / Gmr 18 Hd+ / Gmr 18 Hd / Gmr 18 Xhd / Gmr 24 Hd / Gmr 24 Xhd / Gmr 2524 Xhd2 / Gmr 2526 Xhd2 / Gmr 404 / Gmr 404/406 Radar / Gmr 406 / Gmr 424 Xhd2 / Gmr 604 Xhd/606 Xhd / Gmr 624 Xhd2 / Gmr 626 Xhd2 / Gmr 18 / Gmr 24 / Gms 10 / Gpsmap 1020Xs / Gpsmap 1022Xsv / Gpsmap 1222Xsv / 1222Xsv Plus..
【Satisfaction Guarantee】Camoo Aims To Provide Excellent Products And The Best Service For Customers. You Can Simply Return It If You Are Not Satisfied With The Product. We Support 30 Days Full Refunds For Returns And A 1-Year Warranty.
【Standards Modular Plug】T568b Standards, Rj45 Port. 2 Copper Foil Strips Are Included, For Shielded Cable To Ensure Good Ground In Internal Ground Rj45 Plug Termination. Rj45 Male Plug Kit.
Features
- Marine Network Port Accessories Replacement 010-10603-00 network cable hardware for Garmin cable connector. Budget-friendly network cable repair pair kit, for your Garmin devices: GPS combo radar, dedicated Fishfinders.
- Standards Modular Plug T568B Standards, RJ45 port. 2 Copper foil strips are included, for shielded cable to ensure good ground in Internal ground RJ45 plug termination. RJ45 Male Plug Kit
- Rugged PVC Outer 010-10603-00 network cable connector with upgraded thick PVC outer sheath, excellent waterproof and UV resistant. Strain Relief for maximum design flexibility ensures the connecter's lasting durability under the frequently flexible bend.
- Satisfaction Guarantee Camoo aims to provide excellent products and the best service for customers. You can simply return it if you are not satisfied with the product. We support 30 days full refunds for returns and a 1-year warranty
- Compatibility RJ45 marine network cable connector, widely used on Garmin radar device models: UHD 75cv /UHD 75sv /UHD 95sv / Ultra 105sv / Ultra 125sv / GMR 1224 xHD2 / GMR 1226 xHD2 / GMR 18 HD+ / GMR 18 HD / GMR 18 xHD / GMR 24 HD / GMR 24 xHD / GMR 2524 xHD2 / GMR 2526 xHD2 / GMR 404 / GMR 404/406 Radar / GMR 406 / GMR 424 xHD2 / GMR 604 xHD/606 xHD / GMR 624 xHD2 / GMR 626 xHD2 / GMR 18 / GMR 24 / GMS 10 / GPSMAP 1020xs / GPSMAP 1022xsv / GPSMAP 1222xsv / 1222xsv Plus.
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Weight: 0.06 pounds
Warranty: false
See On Amazon #9
Lifting Adapter, Compatible for Yamaha 5.3 V8, 4.2 V6, F200B, F115B, F425, MT0025, MT0022 and Non-Verado Mercury (1.5" x16)
Asin: B08RS725BC | Ean: 0641197108706 | UPC: 641197108706
Replace Oe -- Equivalent For Yamaha Factory Part Number: Yb-06820..
Package Includes -- Lifting Adapter With Grade 12.9 Bolts. Requires Mt0022 - Lifting Eye - Works On Non Verado Mercury (1.5"X16).
Quality -- High Strength Steel - *1000 Lb Safe Working Load* - Not For Overhead Lifting.
Function -- Use Directly Onto Yamaha Flywheels. Use With Mt0022 Lifting Ring Tool..
Features
- APPLICATION -- Lifting adapter for Yamaha 5.3 V8, 5.6 V8, 4.2 V6, F200B, F115B, F425 and all future yamaha outboards that do not have built in lifting eyes.
- FUNCTION -- Use directly onto Yamaha flywheels. Use with MT0022 Lifting Ring Tool.
- REPLACE OE -- Equivalent for Yamaha Factory Part number: YB-06820.
- QUALITY -- High Strength Steel - *1000 lb Safe Working Load* - Not for Overhead lifting
- PACKAGE INCLUDES -- Lifting Adapter with Grade 12.9 Bolts. Requires MT0022 - Lifting Eye - Works on Non Verado Mercury (1.5x16)
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
See On Amazon #10
Mounting Bracket Suits Mark Elite Hook 3 4 5 TI5 TI7 Part#: 000-10027-001
Asin: B0BGHFCXQ8
✅Package Weight : 0.15Kg.
✅100% Satisfaction Guarantee: If You're Not 100% Satisfied With Our Items, Simply Return Them For A Full Refund In 30 Days. Support 12 Months Warranty. Professional & Sincere Service Allows You To Take No Risks To Purchase In Camoo!.
✅Material: Made Of Quality Plastic And Steel,Designed For Long-Lasting Parts Replacement.
✅ Package Dimensions: 11.3 L X 10.3 H X 7.2 W (Cm).
Features
- Compatibility This Quick Release Bracket is compatible with 5-, 4- and 3" legacy Elite/Mark series displays and 7- and 5" Elite Ti / Ti displays.
- Package Dimensions: 11.3 L x 10.3 H x 7.2 W (CM)
- Package Weight : 0.15KG
- Material: Made of quality plastic and steel,designed for long-lasting parts replacement
- 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with our items, simply return them for a full refund in 30 days. Support 12 months Warranty. Professional & Sincere Service allows you to take no risks to purchase in Camoo!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Dimensions: 2.83 x 4.45 x 4.06 inches
Warranty: No
See On Amazon #11
Inboard Propeller Puller, Compatible with Ski/Wakeboard/Surf Propeller C Clamp Shaft Removal Tool, Fits 3/4" to 1-1/8" Shaft
Asin: B096TPSKV8
【Using】Designed To Remove 2, 3 And 4 Blade Propellers On Inboard Shafts. These Tools Have Fine Thread Screws To Enable A Strong Pulling Force With Little Effort..
【Advantage】Makes Easy Work, So You Can Get On With Enjoying Your Time On The Water, Instead Of Siting On The Ground Fighting With A Stuck Prop..
【Satisfaction Guarantee】We Are Commited To Offering The Best Products And Services To Customers. If You're Not 100% Satisfied With Our Tools, Simply Return It For A Full Refund In 30 Days. Premium Support & 12 Months Warranty..
【Material】Made Of High Strength Heat Treated Alloy Steel And Plated For Rust Protection. These Make The Puller Tough And Sturdy Enough To Achieves A Good Anti-Corrosion And Anti-Rust Effect..
Features
- FITMENT Works great on tournament ski boats and other inboards with a 1-1/8" maximum shaft size. Works on 3/4" to 1-1/8" shaft diameters.
- MATERIAL Made of high strength heat treated alloy steel and plated for rust protection. These make the puller tough and sturdy enough to achieves a good anti-corrosion and anti-rust effect.
- USING Designed to remove 2, 3 and 4 blade propellers on inboard shafts. These tools have fine thread screws to enable a strong pulling force with little effort.
- SATISFACTION GUARANTEE We are commited to offering the best products and services to customers. If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Premium Support & 12 Months Warranty.
- Advantage Makes easy work, so you can get on with enjoying your time on the water, instead of siting on the ground fighting with a stuck prop.
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Weight: 2.27 Pounds
See On Amazon #12
Replace for Jabsco 37040-0000 Marine Toilet Service Kit Fit for Jabsco 37010 Series
Asin: B0CGWM5W8C | Model: 37040000 | PartNumber: 37040000
✅【Superior Quality】：Manufactured From Industry-Leading Materials Using Up-To-Date Equipment, It Ensures Everlasting Reliability And Enduring Value..
✅【100% Satisfaction Guarantee】：If You're Not 100% Satisfied With Our Items, Simply Return Them For A Full Refund In 30 Days. Support 12 Months Warranty. Professional & Sincere Service Allows You To Take No Risks To Purchase In Camoo!.
✅【Package Includes】: Include O-Ring Bowl/Seal *1、 Joker Valve (44106-1000) *1、O-Ring (43990-0066) *1、Sealing Sleeve *1、Washer , Fiber (35445-0000) *4、Wear Plate Kit *1、Gasket (12558-0000) *1、Flexible Impeller (6303-0003) *1、Seal & Retainer (1040-0000) *1、 Lubricant And Instruction *1..
✅【Upgrade Design】：This Service Kit Contains A New Up-Graded Plastic Wearplate With Improved Waste Pump And Rinse Water Pump Shaft Seal.This New Seal Provides Better Fluid Separation Between The Centrifugal Waste Pump And Flexible Impeller Rinse Water Pump.The New Wearplate Eliminates The Need For The Thin Stainless Steel Wearplate And A Second Paper Gasket Required With This Wearplate..
Features
- Compatible With : 37040-0000 Marine Toilet Service Kit compatible with Jabsco 37010 Series Electric Toilets.
- Upgrade Design This Service Kit contains a new Up-Graded Plastic Wearplate with improved Waste Pump and Rinse Water Pump Shaft Seal.This new seal provides better fluid separation between the Centrifugal Waste Pump and Flexible Impeller Rinse Water Pump.The new Wearplate eliminates the need for the thin Stainless Steel Wearplate and a second Paper Gasket required with this Wearplate.
- Superior Quality Manufactured from industry-leading materials using up-to-date equipment, it ensures everlasting reliability and enduring value.
- Package Includes : Include O-Ring Bowl/Seal *1 Joker Valve (44106-1000) *1 O-Ring (43990-0066) *1 Sealing Sleeve *1 Washer , Fiber (35445-0000) *4 Wear Plate Kit *1 Gasket (12558-0000) *1 Flexible Impeller (6303-0003) *1 Seal & Retainer (1040-0000) *1 Lubricant and Instruction *1.
- 100% SATISFACTION GUARANTEE If you're not 100% satisfied with our items, simply return them for a full refund in 30 days. Support 12 months Warranty. Professional & Sincere Service allows you to take no risks to purchase in Camoo!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
See On Amazon #13
5008 Prop Nut Kit Brass Boat Propeller Hardware Kit for 1" & 1-1/8" Inboard Propeller Shaft Inboard Ski, Surf & Wakeboard Boats, Replace # 5008
Asin: B09KMVTB1M
1 X Brass Key #5004.
Satisfaction Guarantee -- If You Are Not Satisfied With Camoo Products, Simply Return It For A Full Refund In 30 Days. Guarantee With 12 Months Warranty. No Worry About Buying!.
1 X Stainless Steel Cotter Pin #5001.
1 X Brass Nylock Nut #5003 (3/4 X 10).
Features
- Fits for inboard ski, surf, & wakeboard boats running a 1" or 1-1/8" shaft.
- 1 X Brass nylock nut #5003 (3/4 x 10)
- 1 X Brass key #5004
- 1 X Stainless steel cotter pin #5001
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
See On Amazon #14
Camoo Replacement for 10108 Lock n' Stow Device, for Mercury Outboard Motor, Fits 35 OptiMax, 150 OptiMax, 175 OptiMax, and 75-HP to 200-HP EFI Outboard, Quick Stow Easy Install Transom Saver
Asin: B0BDF69763
【Advantages】Affordable Boat Trailer Accessory To Solve Your Outboard Motor Trailering Risk Problems. A Tiny But Useful Lock N' Stow Device Supports The Weight Of The Outboard And Stops Your Outboard From Freely Pivoting While Towing, Which Can Reduce 80% Of The Damage Risk Of Your Outboard Motor..
【Satisfaction Guarantee】Camoo Aims To Provide Excellent Products And The Best Service For Customers. You Can Simply Return It If You Are Not Satisfied With The Product. We Support 30 Days Full Refunds For Returns And A 1-Year Warranty.
【Marine Grade Material】Marine Grade Stainless Steel On Main Construction With 2 High-Impact Rubber Caps And Heavy-Duty Stainless Steel Pins, For Durable Long-Term Service. Black Anti-Oxidation Coating Offers Better Anti-Corrosion Protection That Won't Rust In Fresh And Saltwater Environments..
【Trailering Stabilizer】This Outboard Lock N' Stow Device Lifts The Engine's Lower Unit And Locks The Outboard Motor Forward Position. A Quality Motormate For Stabilizing The Motor While You Need Boat Trailering.10108 Lock N Stow Style Transom Saver Device Is About 3Lbs Weight And Is Easy To Carry In Small Spaces In The Boat..
Features
- Fitment Upgraded 10108 Lock N Stow is designed for inline engine type motor fits for Mercury 135 Optimax, 150 Optimax, 175 Optimax, and for Mercury four-stroke 75HP 90HP 115HP 150HP 200HP EFI engines.
- Trailering stabilizer This outboard lock n' stow device lifts the engine's lower unit and locks the outboard motor forward position. A quality motormate for stabilizing the motor while you need boat trailering.10108 Lock N Stow style transom saver device is about 3lbs weight and is easy to carry in small spaces in the boat.
- Advantages Affordable boat trailer accessory to solve your outboard motor trailering risk problems. A tiny but useful Lock n' Stow Device supports the weight of the outboard and stops your outboard from freely pivoting while towing, which can reduce 80% of the damage risk of your outboard motor.
- Marine Grade Material Marine grade stainless steel on main construction with 2 high-impact rubber caps and heavy-duty stainless steel pins, for durable long-term service. Black anti-oxidation coating offers better anti-corrosion protection that won't rust in fresh and saltwater environments.
- Satisfaction Guarantee Camoo aims to provide excellent products and the best service for customers. You can simply return it if you are not satisfied with the product. We support 30 days full refunds for returns and a 1-year warranty
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Dimensions: 1.93 x 11.30 x 9.37 Inches
See On Amazon #15
Camoo Steering Triangle for NK-180S Compatible with Newport Brushless Kayak Motor Kayak Trolling Motors and Other Auxiliary Motors
Asin: B0CL4HN1ND
【Easy To Attach To The Motor】The Compatibility Ensures That The Steering Triangle Can Be Securely Attached To The Motor Without Any Modifications Or Additional Parts. With The Compatibility Between The Steering Triangle And The Motor, Kayakers Can Enjoy Smooth And Effortless Steering While Using The Nk-180S Brushless Kayak Motor..
【Satisfaction Guarantee】We Provide Professional And Sincere Services To Escort Your Shopping. If You Are Not 100% Satisfied With Our Products, You Only Need To Return Them Within 30 Days To Get A Full Refund. Supports A 12-Month Warranty..
【Long-Lasting Performance】The Nk-180S Steering Triangle Is Made From Durable Plastic Materials To Withstand The Harsh Conditions Of Kayaking And Provide Long-Lasting Performance..
【Precise Steering Control】The Steering Triangle Is Specifically Designed To Fit The Motor And Allows For Easy And Precise Steering Control. With The 4 Possible Adjustment Holes For Fine Tuning The Steering Cable Placement..
Features
- WIDE APPLICATION The NK-180S steering triangle is designed to be compatible with the Newport NK-180S brushless kayak motor and Other Auxiliary motors.
- PRECISE STEERING CONTROL The steering triangle is specifically designed to fit the motor and allows for easy and precise steering control. With the 4 possible adjustment holes for fine tuning the steering cable placement.
- EASY TO ATTACH TO THE MOTOR The compatibility ensures that the steering triangle can be securely attached to the motor without any modifications or additional parts. With the compatibility between the steering triangle and the motor, kayakers can enjoy smooth and effortless steering while using the NK-180S brushless kayak motor.
- LONG-LASTING PERFORMANCE The NK-180S steering triangle is made from durable plastic materials to withstand the harsh conditions of kayaking and provide long-lasting performance.
- SATISFACTION GUARANTEE We provide professional and sincere services to escort your shopping. If you are not 100% satisfied with our products, you only need to return them within 30 days to get a full refund. Supports a 12-month warranty.
- See more on Amazon...
Brand: Camoo | Manufacturer: SWX US ONLINE
Warranty: We provide professional and sincere services to escort your shopping. If you are not 100% satisfied with our products, you only need to return them within 30 days to get a full refund. Supports a 12-month warranty.
See On Amazon #16
TSP-2DP Transom Support Plate Alt. For Lower Bolt Holes 12" x 2", Holes 10"
Asin: B08WRC48S4 | Ean: 0641197108942 | UPC: 641197108942
Function -- Supply Support Plate Distributes Outboard Engine Weight To Protect Your Transom..
Satisfaction Guarantee -- If You Are Not Satisfied With Camoo Products, Simply Return It For A Full Refund In 30 Days. Guarantee With 12 Months Warranty. No Worry About Buying!.
Material -- Manufactured From High Quality Cast Aluminum To Serve You For Years To Come..
Dimensions -- 12" X 2", Holes 10", 3/8" Thickness..
Features
- Placement on Vehicle -- Fits LOWER bolt pattern of outboard. Simple to install.
- Dimensions -- 12 X 2, Holes 10, 3/8 Thickness.
- Function -- Supply Support Plate distributes outboard engine weight to protect your transom.
- Material -- Manufactured from high quality Cast Aluminum to serve you for years to come.
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
See On Amazon #17
Camoo 432453 Outboard Tilt Pin Assembly Fit for 1980-1990 Johnson Evinrude Outboard 4hp-15hp Replace OEM 0432453 0389835 0334470 0390441 0334469 778197
Asin: B09LQK7VB8
Replacement Part Number: 0389835, 0334470, 0390441, 0334469, 0432453.
Function: Tilt Pin Is A Important Protection Mechanism To Prevent Your Outboard Motor From Damage. The Pin Will Shear Rather Than Damaging Components Of Your Motor And Gearbox If The Propellor Hits Something Hard..
Superior Material: Premium Grade Stianless Steel And Nylonensures High Strength And Durability, Non-Deformation, Anti-Corrosion, Impact Resistance And Aging Resistance For Long-Lasting Reliability..
②1980-1985, 1989, 1990 Johnson Outboards 4; 1984-1992 Johnson Outboards 4.5; 1980-1983, 1989 Johnson Outboards6; 1984-1990 Johnson Outboards 7.5; 1980-1983, 1989 Johnson Outboards 8; 1980, 1989, 1990 Johnson Outboards 9.9; 1980-1987 Johnson Outboards 14; 1980, 1989, 1990 Johnson Outboards 15.
Features
- Fit On: 1980 -1985, 1989 1990 Evinrude Outboards 4; 1984 -1990 Evinrude Outboards 4.5; 1980-1983, 1989 Evinrude Outboards6; 1984-1990 Evinrude Outboards 7.5; 1980-1983, 1989 Evinrude Outboards 8; 1980, 1989, 1990 Evinrude Outboards 9.9; 1980-1987, 1990 Evinrude Outboards 14; 1980, 1989, 1990 Evinrude Outboards 15;
- 1980-1985, 1989, 1990 Johnson Outboards 4; 1984-1992 Johnson Outboards 4.5; 1980-1983, 1989 Johnson Outboards6; 1984-1990 Johnson Outboards 7.5; 1980-1983, 1989 Johnson Outboards 8; 1980, 1989, 1990 Johnson Outboards 9.9; 1980-1987 Johnson Outboards 14; 1980, 1989, 1990 Johnson Outboards 15
- Replacement Part Number: 0389835, 0334470, 0390441, 0334469, 0432453
- Superior Material: Premium grade stianless steel and nylonensures high strength and durability, non-deformation, anti-corrosion, Impact resistance and aging resistance for long-lasting reliability.
- Function: Tilt pin is a important protection mechanism to prevent your outboard motor from damage. The pin will shear rather than damaging components of your motor and gearbox if the propellor hits something hard.
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Dimensions: 0.59 x 7.87 x 2.56 Inches
Warranty: No
See On Amazon #18
Camoo 150HP Hydraulic Outboard Steering Kit Boat Marine System, Built-in Two-Way Lock Cylinder for Single-Engine Use Only.
Asin: B0D1G7D6X8
✅【Smooth And Efficient Steering】: Super Low-Friction Helm For Smooth Comfortable Steering，Offers Unmatched Comfort And Control. 20% Less Effort At Hard Over Than Competitive Brands..
✅【Aluminum Alloy Casing】:High-Strength Aluminum Alloy Casing Ensure Wear Resistance And Corrosion Resistance, Effectively Preventing Seawater Erosion..
✅【100% Satisfaction Guarantee】：If You're Not 100% Satisfied With Our Items, Simply Return Them For A Full Refund In 30 Days. Support 12 Months Warranty. Professional & Sincere Service Allows You To Take No Risks To Purchase In Camoo!.
✅【Built-In Two-Way Lock Value】: The Cylinder Is Eqiupped With A Built-In Two-Way Locking Valve Which Eliminates Rebound Torque During Torsion..
✅【Wide Application】: Our Hydraulic Steering Kit Fits Most Outboard-Powered Pontoon Boats, Deck Boats, Fishing Boats, And Runabouts Where Horsepower Does Not Exceed 150. For Single Station, Single-Engine Use Only..
Features
- Complete accessories : The hydraulic outboard boat steering kit includes 1 x balanced steering cylinder, 1 x low-friction helm, 2 x 20ft length hose, and 1 x Accessory Kit.
- Wide Application : Our hydraulic steering kit fits most outboard-powered pontoon boats, deck boats, fishing boats, and runabouts where horsepower does not exceed 150. For single station, single-engine use only.
- Smooth And Efficient steering : Super low-friction helm for smooth comfortable steering offers unmatched comfort and control. 20% less effort at hard over than competitive brands.
- Built-In Two-Way Lock Value : The cylinder is eqiupped with a built-in two-way locking valve which eliminates rebound torque during torsion.
- Aluminum Alloy Casing :High-strength aluminum alloy casing ensure wear resistance and corrosion resistance, effectively preventing seawater erosion.
- 100% SATISFACTION GUARANTEE If you're not 100% satisfied with our items, simply return them for a full refund in 30 days. Support 12 months Warranty. Professional & Sincere Service allows you to take no risks to purchase in Camoo!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Warranty: 12 months
See On Amazon #19
Replacement for Minn Kota 1810222 Talon Tilt Bracket kit, Fit for Minn Kota 3 Stage Talon Tilt and Rotate Accessories
Asin: B0CQYGNBWN
【Rotate Stabilizer】Strong And Flexible Composite Anchor Bracket, Mounted Between The Talon And The Adapter Bracket. #1810222 Quick-Release Tilt Bracket For Tilting The Talon Forward Into The Deck. # 2992345 Deck Support Pivot And Support Leg For Talon Shallow Water Anchor Tilting Stability..
【Satisfaction Guarantee】 Camoo Aims To Provide Excellent Products And The Best Service For Customers. You Can Simply Return It If You Are Not Satisfied With The Product. We Support 30 Days Full Refund/Return And A 12-Month Warranty..
【Note】Not Suitable For Use With Talon Shallow Anchors Directly Mounted To The Boat Hull..
【For Temporary Tilt Stow】Easy-Tilt-Down The Talon Anchor For Boat Safety Through Low Clearance Areas: Garage, Bridge, Culvert. Talon Anchor Accessories For You To Vertically Rotate 90° Tilt Stow/Deploy The Anchor System Effortlessly..
Features
- Compatibility Marine-grade talon shallow water anchor tilt bracket fit for Minn Kota all 10' and 12' model talon anchors, 2014 - present models. Talon anchor accessories requires use with a talon adapter bracket.
- For Temporary Tilt Stow Easy-tilt-down the talon anchor for boat safety through low clearance areas: garage, bridge, culvert. Talon anchor accessories for you to vertically rotate 90 tilt stow/deploy the anchor system effortlessly.
- Rotate Stabilizer Strong and flexible composite anchor bracket, mounted between the talon and the adapter bracket. #1810222 quick-release tilt bracket for tilting the talon forward into the deck. # 2992345 deck support pivot and support leg for talon shallow water anchor tilting stability.
- Note Not suitable for use with talon shallow anchors directly mounted to the boat hull.
- Satisfaction Guarantee Camoo aims to provide excellent products and the best service for customers. You can simply return it if you are not satisfied with the product. We support 30 days full refund/return and a 12-month warranty.
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Warranty: No application
See On Amazon #20
6 Pack MKP-10 Prop & Nut Kit B Fits for Minn Kota Trolling Motor Includes Prop Nut & Washer 1865011, 1/2 Inch (B)
Asin: B0BPSFS6XF | Model: MKP-10 | PartNumber: MKP-10
Benefits -- Quickly And Easily Remove Or Replace Your Prop With This Kit..
Satisfaction Guarantee -- If You Are Not Satisfied With Camoo Products, Simply Return It For A Full Refund In 30 Days. Guarantee With 12 Months Warranty. No Worry About Buying!.
Kit Includs -- 2 X Drive Pin (2262658), 2 X Nylock Nut (2093100) And 2 X Lock Washer (2091700).
Function -- Repair The Props On Your Minn Kota. Prop Nut Kit - B / Mkp-10..
Features
- APPLICATION -- Compatible with Minn Kota MKP-4 Vanishing Prop (part number 2091121 / 1865005), MKP-8 Weedless Wedge (part number 2331120 / 1865007). Fit Minn Kota prop dimensions 1/2". For 4 diameter, 12V, 24V &, 36V motors.
- FUNCTION -- Repair the props on your Minn Kota. Prop Nut Kit - B / MKP-10.
- BENEFITS -- Quickly and easily remove or replace your prop with this kit.
- KIT INCLUDS -- 2 X Drive Pin (2262658), 2 X Nylock Nut (2093100) and 2 X Lock Washer (2091700)
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Warranty: 12 months warranty
See On Amazon #21
NMEA 2000 Backbone Cables Drop Cables Tees Terminators Kits for Lowrance Simrad Garmin to Process NEMA 2K Network, Dual Device NMEA 2000 Starter Kit
Asin: B0CSK7DH7C | Model: CE-NMEA 2000 | PartNumber: CE-NMEA 2000
Advantage -- With This Starter Kit Contected, You Will Be Able To Get All The Info From The Engine Including Oil Press, Water Press, Temp, Etc..
Package Content -- Kit Includes Essential Components To Build A Dual Device Nmea 2000 Network: 1 X Power Cable With Tee, 3.3 Ft (1M), Part # 270000 + 2 X Drop Cable, 6.5 Ft (2M), Part # 270302 + 1 X Male Terminator, Part # 270106 + 1 X Female Terminator, Part # 270105 + 1 X Dual Tee Connector, Part # 270103..
Satisfaction Guarantee -- If You Are Not Satisfied With Camoo Products, Simply Return It For A Full Refund In 30 Days. Guarantee With 12 Months Warranty. No Worry About Buying!.
Quality -- Nmea 2000 Approved. Universal And Compatible With Other Manufacturers' Products. Built To Withstand Harshest Marine Environments. The Drop Cables Are Smaller In Diameter And More Flexible Than Backbone Cables For Easy Connection To Nmea 2000 Devices..
Easy Installation -- Color Coded For Easy Installation And Component Identification. Just Plug And Play. Red=Power Connection,Yellow=Backbone Connection, Black=Drop Connection..
Features
- APPLICATION -- Suitable for NMEA 2000 network set up to add devices ( Engine data / Outboard Motor / Fusion radio / GPS / Radar / Chartplotter / Transducer ) from Yamaha & Honda to Garmin depth finder & Lowrance HDS live and ghost.
- EASY INSTALLATION -- Color coded for easy installation and component identification. Just plug and play. Red=power connection,Yellow=backbone connection, Black=drop connection.
- ADVANTAGE -- With this Starter Kit contected, you will be able to get all the info from the engine including oil press, water press, temp, etc.
- QUALITY -- NMEA 2000 Approved. Universal and compatible with other manufacturers' products. Built to withstand harshest marine environments. The drop cables are smaller in diameter and more flexible than backbone cables for easy connection to NMEA 2000 devices.
- PACKAGE CONTENT -- Kit includes essential components to build a dual device NMEA 2000 network: 1 X power cable with Tee, 3.3 ft (1m), part # 270000 + 2 X Drop Cable, 6.5 ft (2m), part # 270302 + 1 X Male Terminator, part # 270106 + 1 X Female Terminator, part # 270105 + 1 X Dual Tee Connector, part # 270103.
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Warranty: 12 months’ warranty
See On Amazon #22
Marine Stainless Steel Quick Release Fender Holder, Easy Pop Up Style Fender Cleat fits for 3/8 Fender Lock Device (Release Pin Only)
Asin: B09RWRXTW5
【Material】Manufactured From 316L Stainless Steel, These Items Are Not Easy To Get Wear And Durable For A Long Time Serving..
【Satisfaction Guarantee】Camoo Aims To Provide Excellent Products And The Best Service For Customers. You Can Simply Return It If You Are Not Satisfied With The Product. We Support 30 Days Full Refund For Return And 12 Months Warranty..
【Nice Design】With This Small Tool You Can Simplify The Process Of Setting The Fender What's Better Is That You Only Need A One-Hand Operation Through The Process..
【Quick Tool】A Quick Tool Designed For Installation And Removal Of Fender Line And Remain Fenders In The Height Position Where The Boaters Desired..
Features
- Fitment Reliable boat fender accessory fit for quick-release fender 3/8 receiver for boating lovers to hang their fender more conveniently and safely.1.93 inches length release pin, a specific 3/8-inch holder is used with the 3/8-inch receiver.
- Quick Tool A quick tool designed for installation and removal of fender line and remain fenders in the height position where the boaters desired.
- Material Manufactured from 316L stainless steel, these items are not easy to get wear and durable for a long time serving.
- Nice design With this small tool you can simplify the process of setting the fender what's better is that you only need a one-hand operation through the process.
- Satisfaction Guarantee Camoo aims to provide excellent products and the best service for customers. You can simply return it if you are not satisfied with the product. We support 30 days full refund for return and 12 months warranty.
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Dimensions: 1.18 x 2.36 x 2.24 Inches
See On Amazon #23
TSP-1 Transom Support Plate For Top Bolt Holes Standard (15" X 2"), 3/8" Thickness Cast Aluminum, 3001.8067 Marine Engine Transom Support Upper Plate
Asin: B092ZVZJ39 | Ean: 0641197109383 | UPC: 641197109383
Function -- Helps Distributes The Stress Of The Outboard Engine Mounting Bolts To Protect The Transom. Prolong Lifespan Of Your Transom When Used With Today's Heavy 4-Stroke Outboard Engines..
Satisfaction Guarantee -- If You Are Not Satisfied With Camoo Products, Simply Return It For A Full Refund In 30 Days. Guarantee With 12 Months Warranty. No Worry About Buying!.
Material -- Manufactured From High Quality Cast Aluminum To Serve You For Years To Come. Cnc Machined For A Perfect Fit..
Dimensions -- 15" X 2", 3/8" Thickness. For Mercury Evinrude Johnson Yamaha..
Features
- APPLICATION -- TSP-1 fits for Top Bolt Holes- Standard. Will perfectly match the universal outboard mounting pattern used by all major manufacturers.
- Dimensions -- 15 X 2, 3/8 Thickness. For Mercury Evinrude Johnson Yamaha.
- Function -- Helps distributes the stress of the outboard engine mounting bolts to protect the transom. Prolong lifespan of your transom when used with today's heavy 4-Stroke outboard engines.
- Material -- Manufactured from high quality Cast Aluminum to serve you for years to come. CNC machined for a perfect fit.
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Warranty: 12 months warranty
See On Amazon #24
710295-1 XNT 9 HW MDI 75 T for Helix 7/8 MEGA Down Imaging Dual Spectrum Chirp with Temperature Transom Mount Transducer
Asin: B0CPPC41DY
Advantage -- This Xnt 9 Hw Mdi 75 T Transducer Offers A Chirp Range Of 150-220Khz And A Max Depth Of 1200Ft (365M). Ideal To Maintain Depth And Bottom At Higher Speeds..
Mega Down Imaging Frequencies - Max Depth: 455Khz: 440-500 Khz - 350Ft (107M), Mega Di: 1075-1150 Khz - 125Ft (38M).
Satisfaction Guarantee -- If You Are Not Satisfied With Camoo Products, Simply Return It For A Full Refund In 30 Days. Guarantee With 12 Months Warranty. No Worry About Buying!.
Dual Spectrum Chirp Frequencies -- Full: 150-220 Khz, Narrow: 180-240 Khz, Wide: 140-200 Khz Dual Spectrum Chirp Max Depth -- 1200Ft (365M).
Function -- Compatible With Helix 7/8 Chirp Mega Di Gps G3 G3n G4 G4n Models. It Will Provide The Sharpest Image The Unit Is Capable Of..
Features
- APPLICATION -- Suitable For HELIX 7 CHIRP MEGA DI GPS G3, for HELIX 7 CHIRP MEGA DI GPS G3N, for HELIX 7 CHIRP MDI GPS G4, for HELIX 7 MDI GPS G4N, for HELIX 8 CHIRP MEGA DI GPS G3N, for HELIX 8 CHIRP MEGA DI GPS G4N.
- FUNCTION -- Compatible with Helix 7/8 CHIRP MEGA DI GPS G3 G3N G4 G4N models. It will provide the sharpest image the unit is capable of.
- ADVANTAGE -- This XNT 9 HW MDI 75 T transducer offers a CHIRP range of 150-220kHz and a max depth of 1200ft (365m). Ideal to maintain depth and bottom at higher speeds.
- Dual Spectrum CHIRP Frequencies -- Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz Dual Spectrum CHIRP Max Depth -- 1200ft (365m)
- MEGA Down Imaging Frequencies - Max Depth: 455kHz: 440-500 kHz - 350ft (107m), MEGA DI: 1075-1150 kHz - 125ft (38m)
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Warranty: 12 months warranty
See On Amazon #25
Boat Trolling Motor Wires Organizer Sleeve, Black Neoprene Fabric Cable Management for Wrap Cover Messy Extension Cords (60" Length, 5.12" wrap Diameter)
Asin: B09SDWW7WN
【Easy Installation】You Just Need To Cover This Sleeve On Wires And Compress The Whole Package With The Hook&Loop Tape Included In The Kit..
【Satisfaction Guarantee】Camoo Aims To Provide Excellent Products And Best Service For Customers. You Can Simply Return It If You Are Not Satisfied With The Product. We Support 30 Days Full Refund For Return And 12 Months Warranty..
【Flexible Neoprene】 Made Of Soft Neoprene This Trolling Motor Wires Organizer Basically Features Protection As Waterproof, Dustproof, Shrink-Resistant, And Heat-Insulation. It Is A Reliable Water-Proof Accessory For Trolling Motor On Your Yacht..
【Convenient Organizer】 A Nice Choice For You To Truss Up And Organize Interlace Wires/Cables On The Yacht, In The Office, Or At Home. Diy Is Available, You Can Cut The Length You Need, For Different Wrap Usages. Upgrade Your Home Or Workplace To Look Tidy And Hide Wires And Protect Them From Damage..
Features
- Dimension The measurable extent of the troll motor wires sleeve is 60in length and 1.5 in wrap dimension. Includes two extra reusable velcro tapes for a firmer grip on the neoprene sleeve.
- Convenient organizer A nice choice for you to truss up and organize interlace wires/cables on the yacht, in the office, or at home. DIY is available, you can cut the length you need, for different wrap usages. Upgrade your home or workplace to look tidy and hide wires and protect them from damage.
- Easy installation You just need to cover this sleeve on wires and compress the whole package with the hook&loop tape included in the kit.
- Flexible neoprene Made of soft neoprene this trolling motor wires organizer basically features protection as waterproof, dustproof, shrink-Resistant, and heat-insulation. It is a reliable water-proof accessory for trolling motor on your yacht.
- Satisfaction Guarantee Camoo aims to provide excellent products and best service for customers. You can simply return it if you are not satisfied with the product. We support 30 days full refund for return and 12 months warranty.
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Dimensions: 1.57 x 9.06 x 7.09 Inches
See On Amazon