Bomeek - Buying Guide
Last Updated: 05/29/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Bomeek KSG / KS7 Recoil Pad & Grip Storage Plug for Kel-Tec KSG / KS7
Asin: B0C8JDQ9D3
Ksg / Ks7 Recoil Pad Made From Shock Absorbing Elastic Material It Provides Increased Shock Absorption, Improved Shooting Accuracy, And Better Control Stability With Reduced Shoulder Stress..
Plug Also Provides An Instant Secure Storage Compartment Inside The Grip Cavity,Special Storage For Cr2032 Battery And Small Allen Wrench..
This Plug To Match The Grip Perfectly, Plug The Cavity Of The Grip To Prevent Debris From Lodging In The Cavity And To Function As A Shock Absorbing Pad To Protect The Grip,From Hard Surfaces Or Impacts..
Ksg / Ks7 Recoil Pad Fits Like A Glove And The Advanced Convex Design Allows For Faster Positioning And Quicker Target Reacquisition..
Features
- KSG / KS7 Recoil Pad & Grip Storage Plug custom designed and molded specifically for Kel-Tec KSG/KS7
- KSG / KS7 Recoil Pad fits like a glove and the advanced convex design allows for faster positioning and quicker target reacquisition.
- KSG / KS7 Recoil Pad Made from shock absorbing elastic material it provides increased shock absorption, improved shooting accuracy, and better control stability with reduced shoulder stress.
- This plug to match the grip perfectly, plug the cavity of the grip to prevent debris from lodging in the cavity and to function as a shock absorbing pad to protect the grip,from hard surfaces or impacts.
- Plug Also provides an instant secure storage compartment inside the grip cavity,Special storage for CR2032 battery and small allen wrench.
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
Dimensions: 1.50 x 8.60 x 2.00 inches
See On Amazon #2
Bomeek 2 Pieces Universal Right & Left Hand Extended Magnetic Pocket Clip Fits 9mm/.40 S&W and.357 Sig Double & Single Stack for Extended Mag-azine or Deeper Concealment Carry
Asin: B0BHNVYTY7
To Help Keep The Magazine In Place, The Retainer Has Wings On Either The Sides To Keep The Magazine From Slipping Off And Force The User To Slide It Up Vertically In A Perfect Draw Stroke..
Note:Test Your Magazine To Make Sure It Is Magnetic,Designed For Use With Metal Magazines Only, Glock 19 - 10 Rd Mags Do Not Hold Very Well Compatible,If You Have A Springfield Xd Test Your Magazine To Make Sure It Is Magnetic.(Most Extended Are Not Magnetic),Works Only Inside The Pocket -- Does Not Work Outside-The-Waistband - On A Belt..
Machined Steel With Blacknitride Finish,So There Isn't Much To Break, And The Clip Attaches With Two Stainless Steel Black Oxide Torx Head Fasteners,The Would Last Longer Under Hard Conditions..
The Super Tight Clip Ensures That It Won't Come Off, Provide More Grip On The Pocket,You Could Carry It In Any Pocket Front Or Back,Universal Usable For A Right-Hand Or Left-Hand Draw..
The Is Has A Rubber Pad Underneath The Clip,This Keeps The Clip In Place No Matter Where You Place The In Your Pocket..
The Uses An N35-N52 Grade Neodymium Magnet Producing Eight Pounds Of Pull At Operating Temperatures Up To 100 Degree Celsius,In Addition To A N35-N52 Grade Neodymium Magnet Does A Good Job Of Holding The Magazine,And Not Have It Slip Off And Bounce Around In A Pocket..
Features
- 2 Pieces Black extended magnetic magazine Pocket holder is designed specifically for Standard Single & Double Stack 9MM/.40 S&W and .357 Sig metal magnetic magazines for extended mag-azines or deeper concealment Carry.
- The uses an N35-N52 grade neodymium magnet producing eight pounds of pull at operating temperatures up to 100 degree Celsius,in addition to a N35-N52 grade neodymium magnet does a good job of holding the magazine,and not have it slip off and bounce around in a pocket.
- To help keep the magazine in place, the retainer has wings on either the sides to keep the magazine from slipping off and force the user to slide it up vertically in a perfect draw stroke.
- The is has a rubber pad underneath the clip,This keeps the clip in place no matter where you place the in your pocket.
- Machined steel with Blacknitride finish,so there isn't much to break, and the clip attaches with two Stainless Steel Black Oxide Torx head fasteners,the would last longer under hard conditions.
- The super tight clip ensures that it won't come off, provide more grip on the pocket,you could carry it in any pocket front or back,Universal usable for a right-hand or left-hand draw.
- NOTE:test your magazine to make sure it is magnetic,designed for use with metal magazines only, glock 19 - 10 rd mags do not hold very well compatible,if you have a Springfield XD test your magazine to make sure it is magnetic.(Most extended are not magnetic),works only inside the pocket -- Does NOT work outside-the-waistband - on a belt.
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
Weight: 0.20 Pounds
See On Amazon #3
Bomeek Rubber Grip Glove Sleeve Insert Fits Full Size Commander & Government Model 1911-2 Pack Black
Asin: B09ZDY3HVT | Ean: 0769318046871 | UPC: 769318046871
Adding 1911 Full Size Rubber Finger Grooves For Comfort And Better Handling..
It Allows The User To Use Any Type Of Side Panel Grips (Wood, Simulated Ivory, Pearlite, Etc) And Have Front Finger Grooves..
These Grips Glove Sleeve Are Only 1Mm Thick,Overall Width Is Only Minimally Affected,Hugs The Contours Of Your Gm 1911 Giving Them The Tightest And Most Secure Fit Possible..
Proportioned Finger Grooves, Our Distinctive Texture That Achieve The Ultimate Sense Of Security And Comfort With A Non-Slip Surface.
Features
- Fits Full Size, Commander & Government Model 1911 - 2 Pack Black
- proportioned finger grooves, our distinctive texture that achieve the ultimate sense of security and comfort with a non-slip surface
- Adding 1911 Full Size rubber finger grooves for comfort and better handling.
- These grips Glove Sleeve are only 1mm thick,overall width is only minimally affected,hugs the contours of your GM 1911 giving them the tightest and most secure fit possible.
- It allows the user to use any type of side panel grips (wood, simulated ivory, pearlite, etc) and have front finger grooves.
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
See On Amazon #4
Bomeek 2 Pieces Standard & Extended Glock Magnetic Pocket Clip Fits 9mm/.40 S&W and.357 Sig Double & Single Stack,for Standard & Extended Magazine or Deeper Concealment Carry
Asin: B0C5XDGYNL
To Help Keep The Magazine In Place, The Retainer Has Wings On Either The Sides To Keep The Magazine From Slipping Off And Force The User To Slide It Up Vertically In A Perfect Draw Stroke..
Note:Test Your Magazine To Make Sure It Is Magnetic,Designed For Use With Metal Magazines Only, Glock 19 - 10 Rd Mags Do Hold Very Well Compatible,If You Have A Springfield Xd Test Your Magazine To Make Sure It Is Magnetic.(Most Extended Are Not Magnetic),Works Only Inside The Pocket -- Does Not Work Outside-The-Waistband - On A Belt..
Machined Steel With Blacknitride Finish,So There Isn't Much To Break, And The Clip Attaches With Two Stainless Steel Black Oxide Torx Head Fasteners,The Would Last Longer Under Hard Conditions..
The Super Tight Clip Ensures That It Won't Come Off, Provide More Grip On The Pocket,You Could Carry It In Any Pocket Front Or Back,Universal Usable For A Right-Hand Or Left-Hand Draw..
The Is Has A Rubber Pad Underneath The Clip,This Keeps The Clip In Place No Matter Where You Place The In Your Pocket..
The Uses An Two N35-N52 Grade Neodymium Magnet,You Can Ensure Your Glock Magazine Is Securely Held And Completely Concealed,Producing Eight Pounds Of Pull At Operating Temperatures Up To 100 Degree Celsius,In Addition To A N35-N52 Grade Neodymium Magnet Does A Good Job Of Holding The Magazine,And Not Have It Slip Off And Bounce Around In A Pocket..
Features
- 2 Pieces Black Glock Standard & Extended magnetic magazine Pocket holder is designed specifically for Single & Double Stack 9MM/.40 S&W and .357 Sig metal magnetic magazines for Standard & Extended magazines or deeper concealment Carry.
- The uses an TWO N35-N52 grade neodymium magnet,you can ensure your Glock magazine is securely held and completely concealed,producing eight pounds of pull at operating temperatures up to 100 degree Celsius,in addition to a N35-N52 grade neodymium magnet does a good job of holding the magazine,and not have it slip off and bounce around in a pocket.
- To help keep the magazine in place, the retainer has wings on either the sides to keep the magazine from slipping off and force the user to slide it up vertically in a perfect draw stroke.
- The is has a rubber pad underneath the clip,This keeps the clip in place no matter where you place the in your pocket.
- Machined steel with Blacknitride finish,so there isn't much to break, and the clip attaches with two Stainless Steel Black Oxide Torx head fasteners,the would last longer under hard conditions.
- The super tight clip ensures that it won't come off, provide more grip on the pocket,you could carry it in any pocket front or back,Universal usable for a right-hand or left-hand draw.
- NOTE:test your magazine to make sure it is magnetic,designed for use with metal magazines only, glock 19 - 10 rd mags do hold very well compatible,if you have a Springfield XD test your magazine to make sure it is magnetic.(Most extended are not magnetic),works only inside the pocket -- Does NOT work outside-the-waistband - on a belt.
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
Weight: 0.14 Pounds
See On Amazon #5
Bomeek 2 Pieces Grip Storage Plug fits Kel-Tec KSG / KS7
Asin: B0C5T6QQ3Q
Plug Also Provides An Instant Secure Storage Compartment Inside The Grip Cavity..
Made From Oil And Chemical Resistant Premium Rubber, That Is Also Weather Stable. Does Not Loose Elasticity During Cold Or Hot Temperature..
Special Storage For Cr2032 Battery And Small Allen Wrench..
This Plug To Match The Grip Perfectly, Plug The Cavity Of The Grip To Prevent Debris From Lodging In The Cavity And To Function As A Shock Absorbing Pad To Protect The Grip,From Hard Surfaces Or Impacts..
Features
- 2 Pieces Grip Storage Plug custom designed and molded specifically for the Kel-Tec KSG/KS7
- This plug to match the grip perfectly, plug the cavity of the grip to prevent debris from lodging in the cavity and to function as a shock absorbing pad to protect the grip,from hard surfaces or impacts.
- Plug Also provides an instant secure storage compartment inside the grip cavity.
- Special storage for CR2032 battery and small allen wrench.
- Made from oil and chemical resistant premium rubber, that is also weather stable. Does not loose elasticity during cold or hot temperature.
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
See On Amazon #6
Bomeek 3 Pieces Bottom Grip Rear Cavity Frame Insert Plug for Glock(Gen 1/2/3) Mid and Full Size Models 17,18,19,20,21,22,23,24,31,32,34,35,37,38 Black
Asin: B0B7R5QNDN
Provides A Clean Finished Look To The Heel Of The Frame..
Engineered For Speed, Beveled For Fast Reloads..
This Unit Installs In The Bottom Rear Cavity Of The Frame Utilizing The Lanyard Hole For Retention..
Flush Fit To Eliminate The Possibility Of Snagging On The Open Cavity..
Helps Keep Debris/Rain/ Snow/ Lint Etc Out Of The Back Cavity..
Features
- 3 Pieces fits GLOCK(Gen 1/2/3) Mid and Full Size models 17,18,19,20,21,22,23,24,31,32,34,35,37,38 Black
- Helps keep debris/rain/ snow/ lint etc out of the back cavity.
- Provides a clean finished look to the heel of the frame.
- Flush fit to eliminate the possibility of snagging on the open cavity.
- Engineered for speed, beveled for fast reloads.
- This unit installs in the bottom rear cavity of the frame utilizing the lanyard hole for retention.
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
See On Amazon #7
Bomeek 2 Pieces Universal Right & Left Hand Standard & Extended Magnetic Pocket Clip Fits 9mm/.40 S&W and.357 Sig Double & Single Stack, for Standard & Extended Magazine or Deeper Concealment Carry
Asin: B0BQ37KT3C
To Help Keep The Magazine In Place, The Retainer Has Wings On Either The Sides To Keep The Magazine From Slipping Off And Force The User To Slide It Up Vertically In A Perfect Draw Stroke..
Note:Test Your Magazine To Make Sure It Is Magnetic,Designed For Use With Metal Magazines Only, Glock 19 - 10 Rd Mags Do Not Hold Very Well Compatible,If You Have A Springfield Xd Test Your Magazine To Make Sure It Is Magnetic.(Most Extended Are Not Magnetic),Works Only Inside The Pocket -- Does Not Work Outside-The-Waistband - On A Belt..
Machined Steel With Blacknitride Finish,So There Isn't Much To Break, And The Clip Attaches With Two Stainless Steel Black Oxide Torx Head Fasteners,The Would Last Longer Under Hard Conditions..
The Super Tight Clip Ensures That It Won't Come Off, Provide More Grip On The Pocket,You Could Carry It In Any Pocket Front Or Back,Universal Usable For A Right-Hand Or Left-Hand Draw..
The Is Has A Rubber Pad Underneath The Clip,This Keeps The Clip In Place No Matter Where You Place The In Your Pocket..
The Uses An N35-N52 Grade Neodymium Magnet Producing Eight Pounds Of Pull At Operating Temperatures Up To 100 Degree Celsius,In Addition To A N35-N52 Grade Neodymium Magnet Does A Good Job Of Holding The Magazine,And Not Have It Slip Off And Bounce Around In A Pocket..
Features
- 2 Pieces Black Standard & Extended magnetic magazine Pocket holder is designed specifically for Single & Double Stack 9MM/.40 S&W and .357 Sig metal magnetic magazines for Standard & Extended magazines or deeper concealment Carry.
- The uses an N35-N52 grade neodymium magnet producing eight pounds of pull at operating temperatures up to 100 degree Celsius,in addition to a N35-N52 grade neodymium magnet does a good job of holding the magazine,and not have it slip off and bounce around in a pocket.
- To help keep the magazine in place, the retainer has wings on either the sides to keep the magazine from slipping off and force the user to slide it up vertically in a perfect draw stroke.
- The is has a rubber pad underneath the clip,This keeps the clip in place no matter where you place the in your pocket.
- Machined steel with Blacknitride finish,so there isn't much to break, and the clip attaches with two Stainless Steel Black Oxide Torx head fasteners,the would last longer under hard conditions.
- The super tight clip ensures that it won't come off, provide more grip on the pocket,you could carry it in any pocket front or back,Universal usable for a right-hand or left-hand draw.
- NOTE:test your magazine to make sure it is magnetic,designed for use with metal magazines only, glock 19 - 10 rd mags do not hold very well compatible,if you have a Springfield XD test your magazine to make sure it is magnetic.(Most extended are not magnetic),works only inside the pocket -- Does NOT work outside-the-waistband - on a belt.
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
Weight: 0.29 pounds
See On Amazon #8
Bomeek 2 Pieces Extension only Fits S&W M&P 9mm Shield EZ M2.0 Single Stack Black
Asin: B0C6FBSC7M
Does Not Alter Capacity..
It Adds Approximately 1/2" Inch Additional Gripping Surface With Enhanced Ergonomics..
Note: Will Not Work On S&W M&P Shield & Shield 2.0 9Mm And 40 Cal. Will Not Work On S&W M&P Shield M2.0 .45Acp. Will Not Work On M&P 9 Shield Plus,Will Not Work On M&P 380 Shield Ez.Does Not Work S&W .45 Compact.
The Extensions Are Made From High Impact Resistant Polymer.
They Form The Next Logical Finger Positioning Feature To Provide Control And Comfort Without Sacrificing Conceal Ability..
Features
- 2 Pieces Will only Fits S&W M&P 9mm Shield EZ M2.0 single stack
- They form the next logical finger positioning feature to provide control and comfort without sacrificing conceal ability.
- Does not alter capacity.
- The extensions are made from high impact resistant polymer
- It adds approximately 1/2 inch additional gripping surface with enhanced ergonomics.
- Note: Will not work on S&W M&P SHIELD & SHIELD 2.0 9mm and 40 cal. Will not work on S&W M&P Shield M2.0 .45ACP. Will not work on M&P 9 SHIELD PLUS,Will not work on M&P 380 SHIELD EZ.Does not work S&W .45 compact
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
See On Amazon #9
Bomeek 2 Pieces Universal Standard Magnetic Pocket Clip Fits:9mm/.40 and.357 Sig Double&Single Stack|.45 Double&Single Stack|.380 Double&Single Stack,for Right & Left Hand Concealed Carry
Asin: B0B6V3VQKP
To Help Keep The Magazine In Place, The Retainer Has Wings On Either The Sides To Keep The Magazine From Slipping Off And Force The User To Slide It Up Vertically In A Perfect Draw Stroke..
Note:Test Your Magazine To Make Sure It Is Magnetic,Designed For Use With Metal Magazines Only, Glock 19 - 10 Rd Mags Do Not Hold Very Well Compatible,If You Have A Springfield Xd Test Your Magazine To Make Sure It Is Magnetic.(Most Extended Are Not Magnetic),Works Only Inside The Pocket -- Does Not Work Outside-The-Waistband - On A Belt..
Machined Steel With Blacknitride Finish,So There Isn't Much To Break, And The Clip Attaches With Two Stainless Steel Black Oxide Torx Head Fasteners,The Would Last Longer Under Hard Conditions..
But The Super Tight Clip Ensures That It Won't Come Off, Provide More Grip On The Pocket,You Could Carry It In Any Pocket Front Or Back,Universal Usable For A Right-Hand Or Left-Hand Draw..
The Is Has A Rubber Pad Underneath The Clip,This Keeps The Clip In Place No Matter Where You Place The In Your Pocket..
The Uses An N35-N52 Grade Neodymium Magnet Producing Eight Pounds Of Pull At Operating Temperatures Up To 100 Degree Celsius,In Addition To A N35-N52 Grade Neodymium Magnet Does A Good Job Of Holding The Magazine,And Not Have It Slip Off And Bounce Around In A Pocket..
Features
- 2 Pieces Black Standard Magnetic Pocket Mag is designed specifically for Standard Single & Double Stack 9MM/.40 S&W and .357 Sig metal magnetic magazines
- The uses an N35-N52 grade neodymium magnet producing eight pounds of pull at operating temperatures up to 100 degree Celsius,in addition to a N35-N52 grade neodymium magnet does a good job of holding the magazine,and not have it slip off and bounce around in a pocket.
- To help keep the magazine in place, the retainer has wings on either the sides to keep the magazine from slipping off and force the user to slide it up vertically in a perfect draw stroke.
- The is has a rubber pad underneath the clip,This keeps the clip in place no matter where you place the in your pocket.
- Machined steel with Blacknitride finish,so there isn't much to break, and the clip attaches with two Stainless Steel Black Oxide Torx head fasteners,the would last longer under hard conditions.
- but the super tight clip ensures that it won't come off, provide more grip on the pocket,you could carry it in any pocket front or back,Universal usable for a right-hand or left-hand draw.
- NOTE:test your magazine to make sure it is magnetic,designed for use with metal magazines only, glock 19 - 10 rd mags do not hold very well compatible,if you have a Springfield XD test your magazine to make sure it is magnetic.(Most extended are not magnetic),works only inside the pocket -- Does NOT work outside-the-waistband - on a belt.
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
Weight: 0.20 pounds
See On Amazon #10
Bomeek Tactical Grip Glove for Moss Shockwave & Remington Tac-14 Grip Sleeve - 2 Pieces Black
Asin: B082XRQNJP | Ean: 0747960174944 | UPC: 747960174944
Features A Thicker Padded Area To Give The Palm Of Your Hand Better Protection From Recoil..
Before Installation Please Soaked The Grip In Hot Water (5 Minutes Or So) Then Added A Bit Of Dish Soap To The Water Stirred It Around To Make Sure The Inside Of The Grip Had Just A Little Soap On It Then Worked It On Quite Easily Without Taking The Grip Off..
Made Of High Quality Rubber.
The Features A Single Positioning Groove And Non-Slip Texturing..
Features
- This slip-on is easy to install and offers much better control as well
- The features a single positioning groove and non-slip texturing.
- Features a thicker padded area to give the palm of your hand better protection from recoil.
- Made of High Quality Rubber
- Before installation please soaked the grip in hot water (5 minutes or so) then added a bit of dish soap to the water stirred it around to make sure the inside of the grip had just a little soap on it then worked it on quite easily WITHOUT taking the grip off.
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
See On Amazon