Best Brazing Flux - Buying Guide
Last Updated: 05/26/2024
Share on
Bestselling Brazing Flux on Amazon
- 25 Rods Brazing Rods, Brass Solder, Brass Welding Rod for Oxyacetylene Gas Welding Brazing Copper Co...
- Peterson #1 Fine Flux, Fine Powder, 1 lb Can
- Weldcote Metals Anti-Borax Brazing Flux 1Lb.
- Ouwinway 20 Rods 1/16''x13'' Aluminum Brazing Rods,Flux Core Aluminum Brazing Rods Aluminum Repair,A...
- HANDY FLUX Paste 1 Pound Jar Soldering Brazing Jewelry Making Repair Silver 1 Lb
- BLUEFIRE J4047A 1/4 lb Low Temperature Aluminum brazing rods Flux Cored Brazing Alloys Coil No Need ...
- Brazing Rod, Flux, 1/16x18, 1225-1370 F, PK3
- YEJJET Aluminum Brazing Rod 1/16 For Propane Torch, Flux Core Aluminum Brazing Rods NO NEED Flux, Al...
- Uniweld UAB Aluma-Braze , All In-One Flux Cored Aluminum Brazing Alloy
- Bernzomatic NS3 Nickel-Silver Flux Coated Brazing/Welding Rods, 2-Piece , Blue
#1
25 Rods Brazing Rods, Brass Solder, Brass Welding Rod for Oxyacetylene Gas Welding Brazing Copper Copper Alloy and Steel, Brass Rods for Crafts DIY 1/16" X 9.84"
Asin: B0BZQ5WF7V
Features
- APPLICATION Versatile and can be used for a variety of welding applications as well as DIY projects such as making whirligigs. Brass brazing rods is used for welding copper alloy, carbon steel and alloy steel. It can also be used as an inlaid carbide tool or DIY decorate. Note: Copper-zinc alloys are not suitable for argon arc welding.
- MATERIAL 25 Rods 1/16 X 9.84 brass brazing wire are included in the package. The chemical composition of the brazing rods: Cu 59%~61%, Si 0.15%~0.35%, Sn 0.8%-1.2%, Pb 105mg/kg, Zn balance. Note: Welding needs to be done in an open place or outdoors. Please wear a protective mask to avoid damage from zinc gas.
- ADVANTAGES Brazing temperature range: 1634-1661 F. Solidus: 1634 F, Liquidus: 1661 F. Tensile Strength: 130N/mm . HB: 100 N/mm2. Elongation%: 25%. Brass rods contain a small amount of tin and silicon, tin can improve the fluidity of the welding wire, silicon can effectively control the evaporation of zinc, eliminate pores, and get a good weld.
- PACKAGING Cadhena brass welding rod is packaged in a PVC tube. Compared with other packages, it can effectively reduce the occurrence of moisture and other incidents and is more convenient to take out and use. Easy to use and perfect for both beginners and professionals. It will help you get the job done right.
- SERVICE These rods are made from the finest materials and are designed to provide you with the best possible results. When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you.
- See more on Amazon...
【Advantages】Brazing Temperature Range: 1634-1661°F. Solidus: 1634°F, Liquidus: 1661°F. Tensile Strength: 130N/Mm². Hb: 100 N/Mm2. Elongation%: 25%. Brass Rods Contain A Small Amount Of Tin And Silicon, Tin Can Improve The Fluidity Of The Welding Wire, Silicon Can Effectively Control The Evaporation Of Zinc, Eliminate Pores, And Get A Good Weld..
【Service】These Rods Are Made From The Finest Materials And Are Designed To Provide You With The Best Possible Results. When You Have A Problem In The Process Of Using The Welding Rod, Please Do Not Hesitate To Contact Us Immediately, We Will Solve All Problems For You..
【Packaging】Cadhena Brass Welding Rod Is Packaged In A Pvc Tube. Compared With Other Packages, It Can Effectively Reduce The Occurrence Of Moisture And Other Incidents And Is More Convenient To Take Out And Use. Easy To Use And Perfect For Both Beginners And Professionals. It Will Help You Get The Job Done Right..
【Material】 25 Rods 1/16" X 9.84" Brass Brazing Wire Are Included In The Package. The Chemical Composition Of The Brazing Rods: Cu 59%~61%, Si 0.15%~0.35%, Sn 0.8%-1.2%, Pb 105Mg/Kg, Zn Balance. Note: Welding Needs To Be Done In An Open Place Or Outdoors. Please Wear A Protective Mask To Avoid Damage From Zinc Gas..
Brand: CADHENA | Manufacturer: CADHENA
See On Amazon #2
Peterson #1 Fine Flux, Fine Powder, 1 lb Can
Asin: B09HKVRMLQ | Model: 0907-1LB | PartNumber: 0907-1LB | Ean: 0724530907430 | UPC: 724530907430
Features
- For brazing and welding cast and malleable iron and steel
- For torch welding brass, bronze and copper
- Working temperature 1200-1600F/650-870C
- AWS Brazing Classification FB3-F
- Finer particle size than Peterson #1 Blue
- See more on Amazon...
Working Temperature 1200-1600F/650-870C.
Finer Particle Size Than Peterson #1 Blue.
Aws Brazing Classification Fb3-F.
For Torch Welding Brass, Bronze And Copper.
Brand: Peterson Fluxes | Manufacturer: Force Industries
Dimensions: 4.25 x 3.50 x 3.50 inches
See On Amazon #3
Weldcote Metals Anti-Borax Brazing Flux 1Lb.
Asin: B005BCUQEM | Ean: 0877511005929 | UPC: 877511005929
Brand: Weldcote Metals | Manufacturer: Weldcote Metals
Dimensions: 1.00 x 6.00 x 1.00 inches | Weight: 1.10 pounds
See On Amazon #4
Ouwinway 20 Rods 1/16''x13'' Aluminum Brazing Rods,Flux Core Aluminum Brazing Rods Aluminum Repair,Aluminum Welding Rods for Propane Torch (20)
Asin: B0CR3WG9KV | Model: ABR-20 | PartNumber: ABR-20
Features
- No Flux Required: This Aluminum Brazing Rods are flux cored welding rods for Oxygen-Propane (Oxygen-Acetylene) flame brazing
- Simple Welding: You don't need to be a professional welder, as long as you have an oxygen-propane (oxygen-acetylene) welding torch and this aluminum brazing wire, you can weld aluminum, aluminum alloys, cast aluminum, and other metals. It is very suitable for welding beginners and can help you find the joy of welding.
- 50 Rods ,1/16 ''x13' 'aluminum welding wire Chemical Composition Requirements: Si 12%, Mg 0.10%, Fe 0.21%, Cu 0.05%, Zn 0.05%, Mn 0.10% AL REM
- Low Temperature: Brazing temperature Range: 716 F -752 F (380 -400 )
- Before brazing, please clean the welding area and then heat the area where you are going to braze.
- See more on Amazon...
50 Rods ,1/16 ''X13' 'Aluminum Welding Wire，Chemical Composition Requirements: Si 12%, Mg≤0.10%, Fe≤0.21%, Cu≤0.05%, Zn≤0.05%, Mn≤0.10%，Al Rem.
Before Brazing, Please Clean The Welding Area And Then Heat The Area Where You Are Going To Braze..
Low Temperature: Brazing Temperature Range: 716°F -752°F (380℃-400℃).
Simple Welding: You Don't Need To Be A Professional Welder, As Long As You Have An Oxygen-Propane (Oxygen-Acetylene) Welding Torch And This Aluminum Brazing Wire, You Can Weld Aluminum, Aluminum Alloys, Cast Aluminum, And Other Metals. It Is Very Suitable For Welding Beginners And Can Help You Find The Joy Of Welding..
Brand: ouwinway | Manufacturer: OUWINWAY
Dimensions: 0.65 x 16.00 x 1.00 inches
See On Amazon #5
HANDY FLUX Paste 1 Pound Jar Soldering Brazing Jewelry Making Repair Silver 1 Lb
Asin: B00XQ1UY7O | Ean: 0028841187971 | UPC: 028841187971
Manufacturer: NOVEL
Weight: 1.19 pounds
See On Amazon #6
BLUEFIRE J4047A 1/4 lb Low Temperature Aluminum brazing rods Flux Cored Brazing Alloys Coil No Need for Flux Welding Wire easy welding rods simple soldering coil for Propane Gas TIG MIG Welding
Asin: B093VB46JD | Ean: 0850007139797 | UPC: 850007139797
Features
- Classic is Better! ER4047 is one of the most classic and widely used Aluminum based brazing alloy in the gas welding industry. Also known as AlSi12", these brazing rods contain 12% silicon and form eutectic structure to achieve better fluidity, lower melting temperature and stronger joint strength. Time Proved Formula for general purpose applications.
- Great Sale Price Total 1/4 Pound Flux-Cored Brazing Coil Value Pack! First class quality products with a lower-than-market price. A Budget Friendly and Wise Choice for both Professionals and DIYers!
- Superior Material BLUEFIRE J4047 contains 11-13% Silicon, 0.3% Cu, 0.2% Zn, 0.1% Mg, 0.8% Fe and rest Aluminum. Excellent corrosion resistance and better fluidity than ER4043. Free-flowing with unequaled capillary attraction, ductility and penetration. Solidus Temperature: 1070 F / 577 C. Liquidus Temperature: 1080 F / 582 C. Specific Gravity: 2.66.
- Strong and Bright Joint With tensile strength up to 35,000 PSI, BLUEFIRE J4047 brazing alloy made super strong joint between welding work pieces. Due to the relatively high Silicon contents, J4047 provides a bright and beautiful finish joint surface, made it a popular choice for furnishing projects. No matter for joint fitting or filler purpose, J4047 provides perfect performances.
- Versatile and Reliable J4047 is perfect to joining Aluminum to Aluminum, or High-Aluminum Alloys. Due to its stability under high temperature & excellent abrasion resistance, J4047 is especially great for automobile engine block repair, piston and other heat-resistant parts. It is widely used in the home furnishing projects such as window frame, A/C and refrigerators. J4047 is not recommended to braze Aluminum to non-Aluminum alloys such as high-magnesium alloys as the joint maybe brittle.
- See more on Amazon...
【Superior Material】Bluefire J4047 Contains 11-13% Silicon, 0.3% Cu, 0.2% Zn, 0.1% Mg, 0.8% Fe And Rest Aluminum. Excellent Corrosion Resistance And Better Fluidity Than Er4043. Free-Flowing With Unequaled Capillary Attraction, Ductility And Penetration. Solidus Temperature: 1070°F / 577°C. Liquidus Temperature: 1080°F / 582°C. Specific Gravity: 2.66..
【Versatile And Reliable】J4047 Is Perfect To Joining Aluminum To Aluminum, Or High-Aluminum Alloys. Due To Its Stability Under High Temperature & Excellent Abrasion Resistance, J4047 Is Especially Great For Automobile Engine Block Repair, Piston And Other Heat-Resistant Parts. It Is Widely Used In The Home Furnishing Projects Such As Window Frame, A/C And Refrigerators. J4047 Is Not Recommended To Braze Aluminum To Non-Aluminum Alloys Such As High-Magnesium Alloys As The Joint Maybe Brittle..
【Strong And Bright Joint】With Tensile Strength Up To 35,000 Psi, Bluefire J4047 Brazing Alloy Made Super Strong Joint Between Welding Work Pieces. Due To The Relatively High Silicon Contents, J4047 Provides A Bright And Beautiful Finish Joint Surface, Made It A Popular Choice For Furnishing Projects. No Matter For Joint Fitting Or Filler Purpose, J4047 Provides Perfect Performances..
【Great Sale Price 】 Total 1/4 Pound Flux-Cored Brazing Coil Value Pack! First Class Quality Products With A Lower-Than-Market Price. A Budget Friendly And Wise Choice For Both Professionals And Diyers!.
Brand: BlueFire | Manufacturer: BLUEFIRE
See On Amazon #7
Brazing Rod, Flux, 1/16x18, 1225-1370 F, PK3
Asin: B002QN89T8 | Model: 45F318MPOP | PartNumber: 45F318MPOP | Ean: 7436829571644
Brand: J.W. Harris | Manufacturer: J.W. Harris Company
See On Amazon #8
YEJJET Aluminum Brazing Rod 1/16 For Propane Torch, Flux Core Aluminum Brazing Rods NO NEED Flux, Aluminum Repair Simple Solution 20 rods (13" Length)
Asin: B0CF1WK97Z | Model: ABR-P | PartNumber: ABR-P
Features
- Application Field: NO NEED FLUX.Low-temperature aluminum brazing rod is suitable for brazing aluminum, aluminum alloys, aluminum-magnesium alloys, and other light-colored metals such as car suspensions, frames, motorcycle tanks, wheels, furniture, lighting fixtures, lamp heads, and even aircraft wings.
- Brazing Method: Our aluminum brazing rod is also perfect for beginners as it is easy to operate and has excellent fillability. The resulting weld seam is generally smooth, and the strength at the brazing point is usually higher than that of the base material. It can achieve impressive welding results.
- Brazing Environment: It is recommended to have the base material temperature between 380 C (716 F) and 420 C (788 F) for brazing. Please note that continuous flame heating of the rod should be avoided. The base material should be preheated first. Once it reaches a certain temperature, bring our YEJJET brazing rod close to the brazing area, and it will melt and cover the weld seam with slight heating.
- Small Size and Easy to Handle: We provide 1/16 and 1/13 low-temperature aluminum brazing rod, suitable for brazing and filling in small-scale projects.
- Product Features: The low-temperature aluminum brazing rod offered by YEJJET contains special flux cores, eliminating the need for additional flux during operation. The rod has good fluidity, and the braze joints are firm, making it a highly recommended product for various applications.
- See more on Amazon...
Brazing Environment: It Is Recommended To Have The Base Material Temperature Between 380°C (716°F) And 420°C (788°F) For Brazing. Please Note That Continuous Flame Heating Of The Rod Should Be Avoided. The Base Material Should Be Preheated First. Once It Reaches A Certain Temperature, Bring Our Yejjet Brazing Rod Close To The Brazing Area, And It Will Melt And Cover The Weld Seam With Slight Heating..
Product Features: The Low-Temperature Aluminum Brazing Rod Offered By Yejjet Contains Special Flux Cores, Eliminating The Need For Additional Flux During Operation. The Rod Has Good Fluidity, And The Braze Joints Are Firm, Making It A Highly Recommended Product For Various Applications..
Small Size And Easy To Handle: We Provide 1/16" And 1/13" Low-Temperature Aluminum Brazing Rod, Suitable For Brazing And Filling In Small-Scale Projects..
Brazing Method: Our Aluminum Brazing Rod Is Also Perfect For Beginners As It Is Easy To Operate And Has Excellent Fillability. The Resulting Weld Seam Is Generally Smooth, And The Strength At The Brazing Point Is Usually Higher Than That Of The Base Material. It Can Achieve Impressive Welding Results..
Brand: YEJJET | Manufacturer: Lubo Tech Ltd
See On Amazon #9
Uniweld UAB Aluma-Braze , All In-One Flux Cored Aluminum Brazing Alloy
Asin: B0BLHW8SW4 | Model: UAB | PartNumber: UAB | Ean: 0688456613953 | UPC: 688456613953
Features
- All-in-one Flux Cored Aluminum Brazing Alloy
- Low temperature self-fluxing alloy ideal for brazing aluminum to aluminum or aluminum to copper.
- Cadmium free zinc-aluminum brazing filler metal.
- Applications include HVAC and Refrigeration repairs, patching holes in aluminum coils and brazing a copper to aluminum transition fitting.
- See more on Amazon...
Cadmium Free Zinc-Aluminum Brazing Filler Metal..
Applications Include Hvac And Refrigeration Repairs, Patching Holes In Aluminum Coils And Brazing A Copper To Aluminum Transition Fitting..
Low Temperature Self-Fluxing Alloy Ideal For Brazing Aluminum To Aluminum Or Aluminum To Copper..
Brand: Uniweld | Manufacturer: Uniweld Products, Inc.
Dimensions: 0.08 x 100.00 x 0.08 inches | Weight: 0.07 Pounds
Warranty: 2 Years from Manufactured Date Code
See On Amazon #10
Bernzomatic NS3 Nickel-Silver Flux Coated Brazing/Welding Rods, 2-Piece , Blue
Asin: B0000CBJGM | Model: NS3 | PartNumber: NS3 | Ean: 5899406038602, 0070042193350, 7262318459229, 7336117863997 | UPC: 070042193350
Features
- 2 pack, nickel silver brazing rod, 85,000 psi tensile strength, 1680 degree to 1750 degree working temperature
- Adds Extra shine to your product
- Manufactured in United States
- Nickel-silver flux coated brazing/welding rods perfect for repairing bicycles, metal furniture, railings, and radiators
- Contains 12-Inch rods
- Tensile strength: 85,000 psi
- Working temp: 1,680 degrees farenheit
- Used in joining carbon and alloy steels as well as non-ferrous materials
- See more on Amazon...
Manufactured In United States.
Working Temp: 1,680 Degrees Farenheit.
Used In Joining Carbon And Alloy Steels As Well As Non-Ferrous Materials.
Contains 12-Inch Rods.
Tensile Strength: 85,000 Psi.
Nickel-Silver Flux Coated Brazing/Welding Rods Perfect For Repairing Bicycles, Metal Furniture, Railings, And Radiators.
Adds Extra Shine To Your Product.
Brand: Bernzomatic | Manufacturer: Bernzomatic Corp
Dimensions: 14.50 x 2.00 x 0.20 inches | Weight: 0.09 pounds
Warranty: Warranty
See On Amazon
Looking For Something Else?
Search