Best Straight Edges - Buying Guide
Last Updated: 05/26/2024
Share on
Bestselling Straight Edges on Amazon
- Anodized Aluminum Straight Edge (24", 38" and 50" Aluminum Straight Edge Set)
- Peachtree Woodworking Supply 24 inch 38 inch and 50 inch Anodized Aluminum Straight Edge Bars, for C...
- OEMTOOLS 25355 24" Straight Edge Steel Precision Ground Machined Straight Edge, Use with Feeler Gaug...
- Bon Tool 24-121 Screed -3/4" X 4" X 8' Reinforced H Alum
- POWERTEC 24 Inch Aluminum Straight Edges, Straight to Within .001'' Over 24'' Machined Flat, Precisi...
- ReluxGo 24 Inch Machinist Precision Steel Straight Edge Tool, Cylinder Head Straight Edge, Straight ...
- POWERTEC 38 Inch Straight Edges, Straight to Within .003'' Over 38'' Machined Flat, Precision Woodwo...
- POWERTEC 50 Inch Straight Edges, Straight to Within .003'' Over 50'' Machined Flat, Precision Woodwo...
- Swanson SVE360 36-Inch Savage Straight Edge, Non-marring, Anodised and Laser-Etched Scale
- Peachtree Woodworking Supply 6 inch 12 inch and 18 inch Anodized Aluminum Straight Edge Bars, for Ch...
#1
Anodized Aluminum Straight Edge (24", 38" and 50" Aluminum Straight Edge Set)
Asin: B08VYVJ1S9
Brand: Yellowhammer | Manufacturer: Yellowhammer
See On Amazon #2
Peachtree Woodworking Supply 24 inch 38 inch and 50 inch Anodized Aluminum Straight Edge Bars, for Checking Straightness On Metal Surface Tops Whet Stones Machinery and to Mark Or Scribe Lines
Asin: B07H4235V3 | Model: 11508 | PartNumber: 11508 | Ean: 0817918021573 | UPC: 817918021573
Features
- Sometimes you need to have your work surface just right for your projects. Whether you re a woodworker, metal worker or hobbyist, when you need a flat work surface you simply just need it. Finding an economical tool to check for flatness used to be quite the challenge. Not anymore!
- Introducing the lightweight and easy to use Fulton Aluminum straight edge. Use the straight edge to properly check for flatness, so you can see if your work surface has any gaps, pits or any type of undulation that may catch, hook or slow down your material while feeding it through a blade, cutter or simply while working.
- The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even.
- The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even.
- The bars measure 3/8 thick by 1 tall which is just the right size to stand upright unsupported so you can free up both hands to make adjustments to your tools or table tops. 24 inch straight edge has a .001 tolerance, the 38 inch straight edge has a .002 tolerance and the 50 inch straight edge has a .003 tolerance.
- See more on Amazon...
The Aluminum Straight Edge Is That Tool And It Is Accurate To Exacting Tolerances Which Makes It Perfect For Checking Wet Stones, Jointers, Planers, Power Tools, General Machinery, Table Tops, Counter Tops And More For Flatness. Works Exceptionally Well Where There Is A Seam To Make Sure Both Sides Are Absolutely Even..
The Bars Measure 3/8” Thick By 1¾” Tall Which Is Just The Right Size To Stand Upright Unsupported So You Can Free Up Both Hands To Make Adjustments To Your Tools Or Table Tops. 24 Inch Straight Edge Has A .001" Tolerance, The 38 Inch Straight Edge Has A .002" Tolerance And The 50 Inch Straight Edge Has A .003" Tolerance..
The Aluminum Straight Edge Is That Tool And It Is Accurate To Exacting Tolerances Which Makes It Perfect For Checking Wet Stones, Jointers, Planers, Power Tools, General Machinery, Table Tops, Counter Tops And More For Flatness. Works Exceptionally Well Where There Is A Seam To Make Sure Both Sides Are Absolutely Even..
Introducing The Lightweight And Easy To Use Fulton Aluminum Straight Edge. Use The Straight Edge To Properly Check For Flatness, So You Can See If Your Work Surface Has Any Gaps, Pits Or Any Type Of Undulation That May Catch, Hook Or Slow Down Your Material While Feeding It Through A Blade, Cutter Or Simply While Working..
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodoworking Supply Inc.
Dimensions: 0.01 x 8.00 x 1.00 inches
See On Amazon #3
OEMTOOLS 25355 24" Straight Edge Steel Precision Ground Machined Straight Edge, Use with Feeler Gauges for Accurate Automotive Repairs, Checks Cylinder Heads and Engine Blocks, Made in The USA
Asin: B076ZYJPGR | Model: 25355 | PartNumber: 25355 | Ean: 0076812253552 | UPC: 076812253552
Features
- Precision Straight Edge: Use this 2' metal straight edge with your feeler gauges to complete automotive engine repairs; Straight edge tool measures heads, blocks, and flywheels for distortion
- Broad Applications: This machinist edge allows you to inspect for flaws on engine blocks, cylinder heads, fly wheels, main bearing saddles, cam bearing saddles, cam covers, bell housings, and more
- Unparalleled Accuracy: Precision ground tool edge to plus or minus 0.001 inch accuracy; These straight edges eliminate the imprecision of visually inspecting for flaws and warpage
- Durable Steel: Straight edge crafted in the USA with cold rolled steel; Straight edge machinist tool features a durable black powder coat finish that resists rust and corrosion
- Product Specifications: 1/4 Thick Steel Machinist Straight Edge; 24 x 2 x .5; Durable Powder Coat Finish; Convenient Hang Hole; Includes Reusable Protective Edge; Made in the USA
- See more on Amazon...
Unparalleled Accuracy: Precision Ground Tool Edge To Plus Or Minus 0.001 Inch Accuracy; These Straight Edges Eliminate The Imprecision Of Visually Inspecting For Flaws And Warpage.
Product Specifications: 1/4" Thick Steel Machinist Straight Edge; 24" X 2" X .5"; Durable Powder Coat Finish; Convenient Hang Hole; Includes Reusable Protective Edge; Made In The Usa.
Durable Steel: Straight Edge Crafted In The Usa With Cold Rolled Steel; Straight Edge Machinist Tool Features A Durable Black Powder Coat Finish That Resists Rust And Corrosion.
Broad Applications: This Machinist Edge Allows You To Inspect For Flaws On Engine Blocks, Cylinder Heads, Fly Wheels, Main Bearing Saddles, Cam Bearing Saddles, Cam Covers, Bell Housings, And More.
Brand: OEMTOOLS | Manufacturer: OEMTOOLS
Dimensions: 0.10 x 24.00 x 2.25 inches | Weight: 3.15 pounds
Warranty: OEMTOOLS Limited Lifetime
See On Amazon #4
Bon Tool 24-121 Screed -3/4" X 4" X 8' Reinforced H Alum
Asin: B00169XFDS | Model: 24-121 | PartNumber: 24-121 | Ean: 0743153241219 | UPC: 743153241219
Features
- Package Dimensions : 16.51 L x 246.38 H x 19.558 W (centimeters)
- End caps prevent screed from loading up with mud
- IMPORTANT : When using screeds always avoid contact with electrical power lines or any electrical source
- See more on Amazon...
Important : When Using Screeds Always Avoid Contact With Electrical Power Lines Or Any Electrical Source.
End Caps Prevent Screed From Loading Up With Mud.
Brand: Bon Tool | Manufacturer: Bon Tool
Dimensions: 0.75 x 96.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #5
POWERTEC 24 Inch Aluminum Straight Edges, Straight to Within .001'' Over 24'' Machined Flat, Precision Woodworking Tools for Table Saw, Router Table, MDF Workbench Top, Jointers, and Planers (71227)
Asin: B07NBQ5HSQ | Model: 71227 | PartNumber: 71227 | Ean: 0843441102984 | UPC: 843441102984
Features
- FUNCTION: A cost effective alternative to determining table surface flatness, engine block flatness, and can be used on other work surfaces, while also able to tune up and align machines such as jointers, planers and various others
- FEATURES: An ergonomic, thick profile with a ribbed reinforcement for easy gripping, with precision milled edges for true parallel and accurate straightness, plus a hanging hole on the end to help keep your precision woodworking tools organized
- ALUMINUM CONSTRUCTION: This heavy duty straight edge was engineered with lightweight anodized metal providing long-term durability and protection from everyday wear and abrasion
- VERSATILE: Can be used as a straight edge guide for machines, drafting tool, drawing bar, or even to check cylinder head distortion - the possibilities are endless
- SCALE: Straight edge ruler measures out to 24 inches long, 2 inches wide, with a 5/16 measuring surface width, and is equipped with a dual sided metric and standard ruler measurement system
- See more on Amazon...
Aluminum Construction: This Heavy Duty Straight Edge Was Engineered With Lightweight Anodized Metal Providing Long-Term Durability And Protection From Everyday Wear And Abrasion.
Scale: Straight Edge Ruler Measures Out To 24 Inches Long, 2 Inches Wide, With A 5/16” Measuring Surface Width, And Is Equipped With A Dual Sided Metric And Standard Ruler Measurement System.
Versatile: Can Be Used As A Straight Edge Guide For Machines, Drafting Tool, Drawing Bar, Or Even To Check Cylinder Head Distortion - The Possibilities Are Endless.
Features: An Ergonomic, Thick Profile With A Ribbed Reinforcement For Easy Gripping, With Precision Milled Edges For True Parallel And Accurate Straightness, Plus A Hanging Hole On The End To Help Keep Your Precision Woodworking Tools Organized.
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 0.75 x 24.00 x 2.25 inches | Weight: 1.45 Pounds
See On Amazon #6
ReluxGo 24 Inch Machinist Precision Steel Straight Edge Tool, Cylinder Head Straight Edge, Straight Edge Machined Flat with Complimentary Feeler Gauges for Checking Cylinder Heads and Engine Blocks
Asin: B0C3V67962 | Model: BJS034 | PartNumber: BJS034
Features
- EASY TO USE AND PATENTED PRODUCT: This cylinder head straight edge tool is designed to verify the straightness of the surfaces of parts in machines and other types of equipment. Used with our complimentary feeler gauge to check distortions in engine blocks, cylinder heads, and flywheels.
- WIDE APPLICATION: This machined straight edge allow you to inspect for flaws on engine blocks, cylinder heads, fly wheels, main bearing saddles, cam bearing saddles, cam covers, and bell housings and other types of equipment.
- UPGRADE DESIGN: This mental straight edge features a precision ground edge to +/- 0.001 inch for inspections, provides true precision, eliminating the imprecision of visually inspecting cylinder heads for flaws.
- PREMIUM MATERIAL: This machinist straight edge is made of high-duty S50C steel, heat-treated, sturdy and steady, corrosion resistant, wear resistant, with reliable use and long service life.
- AFTER-SALES DESCRIPTION:If you have any questions about the purchased tool, please contact us in time, and your problems will be solved in time, we offer lifetime warranty.
- The product is patented and has a unique design
- See more on Amazon...
Upgrade Design: This Mental Straight Edge Features A Precision Ground Edge To +/- 0.001 Inch For Inspections, Provides True Precision, Eliminating The Imprecision Of Visually Inspecting Cylinder Heads For Flaws..
After-Sales Description:If You Have Any Questions About The Purchased Tool, Please Contact Us In Time, And Your Problems Will Be Solved In Time, We Offer Lifetime Warranty..
The Product Is Patented And Has A Unique Design.
Premium Material: This Machinist Straight Edge Is Made Of High-Duty S50c Steel, Heat-Treated, Sturdy And Steady, Corrosion Resistant, Wear Resistant, With Reliable Use And Long Service Life..
Wide Application: This Machined Straight Edge Allow You To Inspect For Flaws On Engine Blocks, Cylinder Heads, Fly Wheels, Main Bearing Saddles, Cam Bearing Saddles, Cam Covers, And Bell Housings And Other Types Of Equipment..
Brand: ReluxGo | Manufacturer: BJS034
Warranty: NO
See On Amazon #7
POWERTEC 38 Inch Straight Edges, Straight to Within .003'' Over 38'' Machined Flat, Precision Woodworking Tools for Table Saw, Router Table, MDF Workbench Top, Jointers, and Planers (71332)
Asin: B07R6RK87W | Model: 71332 | PartNumber: 71332 | Ean: 0843441102991 | UPC: 843441102991
Features
- FUNCTION: A cost effective alternative to determining table surface flatness, engine block flatness, and can be used on other work surfaces, while also able to tune up and align machines such as jointers, planers and various others
- FEATURES: An ergonomic, thick profile with a ribbed reinforcement for easy gripping, with precision milled edges for true parallel and accurate straightness, plus a hanging hole on the end to help keep your precision woodworking tools organized
- ALUMINUM CONSTRUCTION: This heavy duty straight edge was engineered with lightweight anodized metal providing long-term durability and protection from everyday wear and abrasion
- VERSATILE: Can be used as a straight edge guide for machines, drafting tool, drawing bar, or even to check cylinder head distortion - the possibilities are endless
- SCALE: Straight edge ruler measures out to 38 inches long, 2 inches wide, with a 5/16 measuring surface width, and is equipped with a dual sided metric and standard ruler measurement system
- See more on Amazon...
Aluminum Construction: This Heavy Duty Straight Edge Was Engineered With Lightweight Anodized Metal Providing Long-Term Durability And Protection From Everyday Wear And Abrasion.
Scale: Straight Edge Ruler Measures Out To 38 Inches Long, 2 Inches Wide, With A 5/16” Measuring Surface Width, And Is Equipped With A Dual Sided Metric And Standard Ruler Measurement System.
Versatile: Can Be Used As A Straight Edge Guide For Machines, Drafting Tool, Drawing Bar, Or Even To Check Cylinder Head Distortion - The Possibilities Are Endless.
Features: An Ergonomic, Thick Profile With A Ribbed Reinforcement For Easy Gripping, With Precision Milled Edges For True Parallel And Accurate Straightness, Plus A Hanging Hole On The End To Help Keep Your Precision Woodworking Tools Organized.
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 0.75 x 38.00 x 2.25 inches | Weight: 2.30 Pounds
See On Amazon #8
POWERTEC 50 Inch Straight Edges, Straight to Within .003'' Over 50'' Machined Flat, Precision Woodworking Tools for Table Saw, Router Table, MDF Workbench Top, Jointers, and Planers (71503)
Asin: B084TL5T83 | Model: 71503 | PartNumber: 71503 | Ean: 0843441105336 | UPC: 843441105336
Features
- FUNCTION: A cost saving solution that provides a guaranteed straight edge while quickly centering items and determining with precision accuracy if your work surfaces, stock, jointers, planers, and other machinery are flat
- FEATURES: An ergonomic, thick profile with a ribbed reinforcement for easy gripping, with a smooth and flat reference edge, plus a single hanging hole to help keep your metal finishing tools organized
- ALUMINUM CONSTRUCTION: This high quality straight edge made from lightweight anodized metal providing durability and protection from everyday wear and tear
- VERSATILE: Can be used as a straight edge metal ruler for woodworking, finishing tool for concrete or drafting tool for a variety of professional projects great addition to any DIY home kit
- SPECIFICATIONS: Straight edge ruler measures out to 50 inches long, 2 inches wide, with a 5/16 measuring surface width
- See more on Amazon...
Aluminum Construction: This High Quality Straight Edge Made From Lightweight Anodized Metal Providing Durability And Protection From Everyday Wear And Tear.
Specifications: Straight Edge Ruler Measures Out To 50 Inches Long, 2 Inches Wide, With A 5/16” Measuring Surface Width.
Versatile: Can Be Used As A Straight Edge Metal Ruler For Woodworking, Finishing Tool For Concrete Or Drafting Tool For A Variety Of Professional Projects – Great Addition To Any Diy Home Kit.
Features: An Ergonomic, Thick Profile With A Ribbed Reinforcement For Easy Gripping, With A Smooth And Flat Reference Edge, Plus A Single Hanging Hole To Help Keep Your Metal Finishing Tools Organized.
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 0.75 x 50.00 x 0.38 inches
See On Amazon #9
Swanson SVE360 36-Inch Savage Straight Edge, Non-marring, Anodised and Laser-Etched Scale
Asin: B0083SGQW2 | Model: SVE360 | PartNumber: SVE360 | Ean: 0038987953606 | UPC: 038987953606
Features
- DURABLE - Solid, anodized aerospace aluminum frame for durability
- PROTECTIVE - ThumbSaver raised edge design protects your hand while working
- SAFE - No Slip Grip backing provides protection against scratching or marring surfaces and a a more stable and safer cutting guide
- HIGH PRECISION - Clearly marked white laser etching on both edges really pops against the high-visibility orange finish of this straight edge
- HIGHLY USEFUL - Scales to 1/16-in
- VARIETY - Available in 24-in, 36-in, 48-in, 72-in, and 96-in lengths
- See more on Amazon...
Safe - No Slip Grip Backing Provides Protection Against Scratching Or Marring Surfaces And A A More Stable And Safer Cutting Guide.
Highly Useful - Scales To 1/16-In.
Variety - Available In 24-In, 36-In, 48-In, 72-In, And 96-In Lengths.
High Precision - Clearly Marked White Laser Etching On Both Edges Really Pops Against The High-Visibility Orange Finish Of This Straight Edge.
Protective - Thumbsaver Raised Edge Design Protects Your Hand While Working.
Brand: Swanson Tool Co., Inc | Manufacturer: Swanson Tool
Dimensions: 2.01 x 36.02 x 0.98 inches | Weight: 1.20 Pounds
See On Amazon #10
Peachtree Woodworking Supply 6 inch 12 inch and 18 inch Anodized Aluminum Straight Edge Bars, for Checking Straightness On Metal Surface Tops Whet Stones Machinery and to Mark Or Scribe Lines
Asin: B08VS1NXVW | Model: 11512 | PartNumber: 11512 | Ean: 0817918021443 | UPC: 817918021443
Features
- Sometimes you need to have your work surface just right for your projects. Whether you re a woodworker, metal worker or hobbyist, when you need a flat work surface you simply just need it. Finding an economical tool to check for flatness used to be quite the challenge. Not anymore!
- Introducing the lightweight and easy to use Fulton Aluminum straight edge. Use the straight edge to properly check for flatness, so you can see if your work surface has any gaps, pits or any type of undulation that may catch, hook or slow down your material while feeding it through a blade, cutter or simply while working.
- The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even.
- The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even.
- The bars measure 3/8 thick by 1 tall which is just the right size to stand upright unsupported so you can free up both hands to make adjustments to your tools or table tops. Each of the included 6 inch, 12 inch and 18 inch straight edge bars have a .001 tolerance.
- See more on Amazon...
The Aluminum Straight Edge Is That Tool And It Is Accurate To Exacting Tolerances Which Makes It Perfect For Checking Wet Stones, Jointers, Planers, Power Tools, General Machinery, Table Tops, Counter Tops And More For Flatness. Works Exceptionally Well Where There Is A Seam To Make Sure Both Sides Are Absolutely Even..
The Bars Measure 3/8” Thick By 1¾” Tall Which Is Just The Right Size To Stand Upright Unsupported So You Can Free Up Both Hands To Make Adjustments To Your Tools Or Table Tops. Each Of The Included 6 Inch, 12 Inch And 18 Inch Straight Edge Bars Have A .001" Tolerance..
The Aluminum Straight Edge Is That Tool And It Is Accurate To Exacting Tolerances Which Makes It Perfect For Checking Wet Stones, Jointers, Planers, Power Tools, General Machinery, Table Tops, Counter Tops And More For Flatness. Works Exceptionally Well Where There Is A Seam To Make Sure Both Sides Are Absolutely Even..
Introducing The Lightweight And Easy To Use Fulton Aluminum Straight Edge. Use The Straight Edge To Properly Check For Flatness, So You Can See If Your Work Surface Has Any Gaps, Pits Or Any Type Of Undulation That May Catch, Hook Or Slow Down Your Material While Feeding It Through A Blade, Cutter Or Simply While Working..
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 0.01 x 8.00 x 1.00 inches
See On Amazon #11
38" Anodized Aluminum Straight Edge Guaranteed Straight to Within .003" Over Full 38" Length 108511
Asin: B017CG96UY | Model: 108511 | PartNumber: 108511 | Ean: 0700667464893 | UPC: 700667464893
Brand: Taytools | Manufacturer: Taylor Toolworks
Weight: 1.85 Pounds
See On Amazon #12
18 Inch Long Anodized Aluminum Straight Edge Bar with .001 Tolerance | Perfect for Checking Straightness On Metal Surface Tops Whet Stones Machinery and Can Be Used to Mark Or Scribe Lines
Asin: B08VS81JHP | Ean: 0817918022792 | UPC: 817918022792
Features
- Sometimes you need to have your work surface just right for your projects. Whether you re a woodworker, metal worker or hobbyist, when you need a flat work surface you simply just need it. Finding an economical tool to check for flatness used to be quite the challenge. Not anymore!
- Introducing the lightweight and easy to use Fulton Aluminum straight edge. Use the straight edge to properly check for flatness, so you can see if your work surface has any gaps, pits or any type of undulation that may catch, hook or slow down your material while feeding it through a blade, cutter or simply while working.
- The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even.
- The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even.
- The bars measure 3/8 thick by 1 tall which is just the right size to stand upright unsupported so you can free up both hands to make adjustments to your tools or table tops. The Fulton Aluminum Straight edge is the perfect for any workshop where accuracy is a must!
- See more on Amazon...
The Aluminum Straight Edge Is That Tool And It Is Accurate To Exacting Tolerances Which Makes It Perfect For Checking Wet Stones, Jointers, Planers, Power Tools, General Machinery, Table Tops, Counter Tops And More For Flatness. Works Exceptionally Well Where There Is A Seam To Make Sure Both Sides Are Absolutely Even..
The Bars Measure 3/8” Thick By 1¾” Tall Which Is Just The Right Size To Stand Upright Unsupported So You Can Free Up Both Hands To Make Adjustments To Your Tools Or Table Tops. The Fulton Aluminum Straight Edge Is The Perfect For Any Workshop Where Accuracy Is A Must!.
The Aluminum Straight Edge Is That Tool And It Is Accurate To Exacting Tolerances Which Makes It Perfect For Checking Wet Stones, Jointers, Planers, Power Tools, General Machinery, Table Tops, Counter Tops And More For Flatness. Works Exceptionally Well Where There Is A Seam To Make Sure Both Sides Are Absolutely Even..
Introducing The Lightweight And Easy To Use Fulton Aluminum Straight Edge. Use The Straight Edge To Properly Check For Flatness, So You Can See If Your Work Surface Has Any Gaps, Pits Or Any Type Of Undulation That May Catch, Hook Or Slow Down Your Material While Feeding It Through A Blade, Cutter Or Simply While Working..
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 0.01 x 8.00 x 1.00 Inches
See On Amazon #13
Peachtree Woodworking Supply Fulton 50 Inch Long Anodized Aluminum Straight Edge Bar with .003 Tolerance | Perfect for Checking Straightness On Metal Surface Tops
Asin: B07H38ZFP3 | Model: 3443 | PartNumber: 3443 | Ean: 0810948018568 | UPC: 810948018568
Features
- Sometimes you need to have your work surface just right for your projects. Whether you re a woodworker, metal worker or hobbyist, when you need a flat work surface you simply just need it. Finding an economical tool to check for flatness used to be quite the challenge. Not anymore!
- Introducing the lightweight and easy to use Fulton Aluminum straight edge. Use the straight edge to properly check for flatness, so you can see if your work surface has any gaps, pits or any type of undulation that may catch, hook or slow down your material while feeding it through a blade, cutter or simply while working.
- The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even.
- The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even.
- The bars measure 3/8 thick by 1 tall which is just the right size to stand upright unsupported so you can free up both hands to make adjustments to your tools or table tops. The Fulton Aluminum Straight edge is the perfect for any workshop where accuracy is a must!
- See more on Amazon...
The Aluminum Straight Edge Is That Tool And It Is Accurate To Exacting Tolerances Which Makes It Perfect For Checking Wet Stones, Jointers, Planers, Power Tools, General Machinery, Table Tops, Counter Tops And More For Flatness. Works Exceptionally Well Where There Is A Seam To Make Sure Both Sides Are Absolutely Even..
The Bars Measure 3/8” Thick By 1¾” Tall Which Is Just The Right Size To Stand Upright Unsupported So You Can Free Up Both Hands To Make Adjustments To Your Tools Or Table Tops. The Fulton Aluminum Straight Edge Is The Perfect For Any Workshop Where Accuracy Is A Must!.
The Aluminum Straight Edge Is That Tool And It Is Accurate To Exacting Tolerances Which Makes It Perfect For Checking Wet Stones, Jointers, Planers, Power Tools, General Machinery, Table Tops, Counter Tops And More For Flatness. Works Exceptionally Well Where There Is A Seam To Make Sure Both Sides Are Absolutely Even..
Introducing The Lightweight And Easy To Use Fulton Aluminum Straight Edge. Use The Straight Edge To Properly Check For Flatness, So You Can See If Your Work Surface Has Any Gaps, Pits Or Any Type Of Undulation That May Catch, Hook Or Slow Down Your Material While Feeding It Through A Blade, Cutter Or Simply While Working..
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodoworking Supply Inc.
Dimensions: 0.01 x 8.00 x 1.00 inches
See On Amazon #14
50" Anodized Aluminum Straight Edge Guaranteed Straight to Within .003" Over Full 50" Length SE50
Asin: B017CGDO4S | Model: 108514 | PartNumber: 108514 | Ean: 0700667464909 | UPC: 700667464909
Features
- This aluminum straight edge is an economical alternative to other much more expensive straight edges on the market. This straight edge is very helpful to determine machine table flatness and in setting up machines such as jointers and planers and various out feed tables.
- . The straight edge is made from extruded aircraft aluminum and then the reference edge is machined flat to within 0.003 over the entire 50 inch length.
- The easy-grip cross section is 7/16 inch thick and 1-3/4 inch wide. Finish is black anodized.
- There is a hanging hole in one end.
- These straight edges are available in five different lengths.
- See more on Amazon...
The Easy-Grip Cross Section Is 7/16 Inch Thick And 1-3/4 Inch Wide. Finish Is Black Anodized..
These Straight Edges Are Available In Five Different Lengths..
There Is A Hanging Hole In One End..
. The Straight Edge Is Made From Extruded Aircraft Aluminum And Then The Reference Edge Is Machined Flat To Within 0.003" Over The Entire 50 Inch Length..
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 1.75 x 50.00 x 0.41 inches | Weight: 2.60 pounds
See On Amazon #15
Central Tools 6431 Straight Edge 35x1/4
Asin: B000OQJFP6 | Model: 6431 | PartNumber: 6431 | Ean: 0780538004946 | UPC: 780538004946
Convenient Hang-Up Hole.
35" Long.
Tough Epoxy Coating.
Brand: Central Tools | Manufacturer: Central Tools
Dimensions: 2.30 x 1.60 x 35.20 Inches | Weight: 0.86 Pounds
See On Amazon #16
Bon Tool 24-119 Screed - 3/4" X 4" X 4' Reinforced H Alum
Asin: B00169YR44 | Model: Bon Tools - 24-119-B9 | PartNumber: Bon Tools - 24-119-B9 | Ean: 0743153241196 | UPC: 743153241196
Features
- The largest selection of tools manufactured to the highest quality standards
- Leader in professional contruction tools
- Innovative, durable
- See more on Amazon...
Innovative, Durable.
Leader In Professional Contruction Tools.
Brand: Bon Tool | Manufacturer: Bon Tool
Dimensions: 0.75 x 48.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #17
Starrett Steel Straight Edge with Bevel Edge, Not Graduated - 12" (300mm) Length, 11/64" (4.4mm) Thickness, 1-13/32" (36mm) Width,
Asin: B0006J4HTK | Model: 385-12 | PartNumber: 385-12 | Ean: 0049659514551 | UPC: 049659514551
Features
- Designed for Precision - The Starrett 385 Series Steel Straight Edit with Bevel Edge is precision ground and nicely finished to rigid Starrett standards. It provides users with accurate and consistent results.
- Beveled One Edge - This tool is beveled on one edge but not graduated or has any mark of units for measurement. It is unexcelled for drawing or scribing straight lines and checking surfaces for straightness.
- Easy to Use - The Starrett Steel Straight Edge thickness and design permit shape retention and accuracy. This tool is portable, easy to use and easy to handle.
- Best Performance - The 380 and 385 Series in sizes 36 and longer are marked with arrows at two suspension points. If the straight edges are brought to the work and used on edge, they should be suspended at these two points to minimize deflection.
- The Standard for Excellence - Manufacturing quality tools that provide consistent and reliable performance since 1880, Starrett's commitment has earned them a reputation as one of the most trusted names in the industry.
- See more on Amazon...
Easy To Use - The Starrett Steel Straight Edge Thickness And Design Permit Shape Retention And Accuracy. This Tool Is Portable, Easy To Use And Easy To Handle..
The Standard For Excellence - Manufacturing Quality Tools That Provide Consistent And Reliable Performance Since 1880, Starrett's Commitment Has Earned Them A Reputation As One Of The Most Trusted Names In The Industry..
Best Performance - The 380 And 385 Series In Sizes 36" And Longer Are Marked With Arrows At Two Suspension Points. If The Straight Edges Are Brought To The Work And Used On Edge, They Should Be Suspended At These Two Points To Minimize Deflection..
Beveled One Edge - This Tool Is Beveled On One Edge But Not Graduated Or Has Any Mark Of Units For Measurement. It Is Unexcelled For Drawing Or Scribing Straight Lines And Checking Surfaces For Straightness..
Brand: Starrett | Manufacturer: STAKF
Dimensions: 2.00 x 12.00 x 2.00 inches | Weight: 0.77 pounds
See On Amazon #18
Bon Tool 24-120 Screed -3/4" X 4" X 6' Reinforced H Alum
Asin: B00169YR4E | Model: Bon Tools - 24-120-B9 | PartNumber: Bon Tools - 24-120-B9 | Ean: 0743153241202 | UPC: 743153241202
Features
- The largest selection of tools manufactured to the highest quality standards
- Leader in professional contruction tools
- See more on Amazon...
Leader In Professional Contruction Tools.
Brand: Bon Tool | Manufacturer: Bon Tool
Dimensions: 0.75 x 72.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #19
Starrett Steel Straight Edge, Not Beveled or Graduated - 12" (300mm) Length, 11/64" (4.4mm) Thickness, 1-13/32" (36mm) Width,
Asin: B0006J4EES | Model: 380-12 | PartNumber: 380-12 | Ean: 0049659514384 | UPC: 049659514384
Features
- Designed for Precision - The Starrett 380 Series Steel Straight Edge is precision ground and nicely finished to rigid Starrett standards. It provides users with accurate and consistent results.
- Not Beveled or Graduated - This tool does not have a mark of units for measurements and a slope on its edges. It is unexcelled for drawing or scribing straight lines and checking surfaces for straightness.
- Easy to Use - The Starrett Steel Straight Edge thickness and design permit shape retention and accuracy. This tool is portable, easy to use and easy to handle.
- Best Performance - The 380 and 385 Series in sizes 36 and longer are marked with arrows at two suspension points. If the straight edges are brought to the work and used on edge, they should be suspended at these two points to minimize deflection.
- The Standard for Excellence - Manufacturing quality tools that provide consistent and reliable performance since 1880, Starrett's commitment has earned them a reputation as one of the most trusted names in the industry.
- See more on Amazon...
Easy To Use - The Starrett Steel Straight Edge Thickness And Design Permit Shape Retention And Accuracy. This Tool Is Portable, Easy To Use And Easy To Handle..
The Standard For Excellence - Manufacturing Quality Tools That Provide Consistent And Reliable Performance Since 1880, Starrett's Commitment Has Earned Them A Reputation As One Of The Most Trusted Names In The Industry..
Best Performance - The 380 And 385 Series In Sizes 36" And Longer Are Marked With Arrows At Two Suspension Points. If The Straight Edges Are Brought To The Work And Used On Edge, They Should Be Suspended At These Two Points To Minimize Deflection..
Not Beveled Or Graduated - This Tool Does Not Have A Mark Of Units For Measurements And A Slope On Its Edges. It Is Unexcelled For Drawing Or Scribing Straight Lines And Checking Surfaces For Straightness..
Brand: Starrett | Manufacturer: Starrett
Dimensions: 0.10 x 12.40 x 2.00 inches
Warranty: 1 Year Limited
See On Amazon #20
Barwalt 8' Aluminum Straight Edge
Asin: B000NCZZUU | Model: SE-8 | PartNumber: SE-8 | Ean: 0735883801801 | UPC: 735883801801
Brand: BARWALT | Manufacturer: Barwalt
Weight: 8.50 pounds
See On Amazon #21
POWERTEC 18 Inch Straight Edges, Straight to Within .001'' Over 18'' Machined Flat, Precision Woodworking Tools for Table Saw, Router Table, MDF Workbench Top, Jointers, and Planers. 71213
Asin: B07NCJZP9Z | Model: 71213 | PartNumber: 71213 | Ean: 0843441102977 | UPC: 843441102977
Features
- FUNCTION: A cost effective alternative to determining table surface flatness, engine block flatness, and can be used on other work surfaces, while also able to tune up and align machines such as jointers, planers and various others
- FEATURES: An ergonomic, thick profile with a ribbed reinforcement for easy gripping, with precision milled edges for true parallel and accurate straightness, plus a hanging hole on the end to help keep your precision woodworking tools organized
- ALUMINUM CONSTRUCTION: This heavy duty straight edge was engineered with lightweight anodized metal providing long-term durability and protection from everyday wear and abrasion
- VERSATILE: Can be used as a straight edge guide for machines, drafting tool, drawing bar, or even to check cylinder head distortion - the possibilities are endless
- SCALE: Straight edge ruler measures out to 18 inches long, 2 inches wide, with a 5/16 measuring surface width, and is equipped with a dual sided metric and standard ruler measurement system
- See more on Amazon...
Aluminum Construction: This Heavy Duty Straight Edge Was Engineered With Lightweight Anodized Metal Providing Long-Term Durability And Protection From Everyday Wear And Abrasion.
Scale: Straight Edge Ruler Measures Out To 18 Inches Long, 2 Inches Wide, With A 5/16” Measuring Surface Width, And Is Equipped With A Dual Sided Metric And Standard Ruler Measurement System.
Versatile: Can Be Used As A Straight Edge Guide For Machines, Drafting Tool, Drawing Bar, Or Even To Check Cylinder Head Distortion - The Possibilities Are Endless.
Features: An Ergonomic, Thick Profile With A Ribbed Reinforcement For Easy Gripping, With Precision Milled Edges For True Parallel And Accurate Straightness, Plus A Hanging Hole On The End To Help Keep Your Precision Woodworking Tools Organized".
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 0.75 x 18.00 x 2.25 inches | Weight: 0.86 pounds
See On Amazon #22
Central Tools 6429 Straight Edge 24x1/4
Asin: B0002SQUVI | Model: 6429 | PartNumber: 6429 | Ean: 0088021735934, 0780538004922, 0031113163108, 0080850338379 | UPC: 031113163108, 080850338379, 088021735934, 780538004922
Convenient Hang-Up Hole.
24" Long.
Tough Epoxy Coating.
Brand: Central Tools | Manufacturer: Central Tools
Dimensions: 2.20 x 24.00 x 0.40 inches | Weight: 3.50 pounds
See On Amazon #23
Johnson Level & Tool J118 Aluminum Rule, 18", Silver, 1 Rule
Asin: B00FA1CNLS | Model: 300596 | PartNumber: 300596 | Ean: 0049448511808 | UPC: 049448511808
Features
- Measuring Scale: This measurement ruler by Johnson is impeccably designed for carpenters; metalworkers; builders and homeowners to use for a variety of measuring applications.
- Quality Material: The Johnson measurement rule features a sturdy and durable aluminum construction along with a clear and protective anodized finish; which protects it from everyday wear and abrasion.
- Practical Design: Featuring an ergonomic design; this aluminum ruler is easy to read with black bold screened and thermal-bonded graduations in 1/8 in. and 1/6 in. The practical design also ensures maximum accuracy and delivers a precise job.
- Easy Storage: The aluminum measurement rule has a hanging hole on the end; which helps you to keep it organized along with other woodworking tools and equipment.
- Product Description: This corrosion-resistant rule is 18 in. long and 1-1/8 in. wide. It works efficiently as a straight edge guide for different carpentry; installing; surveying and framing applications.
- Durable 1-1/8 wide extruded aluminum rules
- Screened, thermal-bonded black graduations in 1/8 and 1/16
- Bold, easy to read graduations and numbers
- Clear protective anodized finish
- See more on Amazon...
Practical Design: Featuring An Ergonomic Design; This Aluminum Ruler Is Easy To Read With Black Bold Screened And Thermal-Bonded Graduations In 1/8 In. And 1/6 In. The Practical Design Also Ensures Maximum Accuracy And Delivers A Precise Job..
Screened, Thermal-Bonded Black Graduations In 1/8" And 1/16".
Bold, Easy To Read Graduations And Numbers.
Product Description: This Corrosion-Resistant Rule Is 18 In. Long And 1-1/8 In. Wide. It Works Efficiently As A Straight Edge Guide For Different Carpentry; Installing; Surveying And Framing Applications..
Durable 1-1/8" Wide Extruded Aluminum Rules.
Easy Storage: The Aluminum Measurement Rule Has A Hanging Hole On The End; Which Helps You To Keep It Organized Along With Other Woodworking Tools And Equipment..
Clear Protective Anodized Finish.
Quality Material: The Johnson Measurement Rule Features A Sturdy And Durable Aluminum Construction Along With A Clear And Protective Anodized Finish; Which Protects It From Everyday Wear And Abrasion..
Brand: Johnson | Manufacturer: Johnson Level & Tool
Dimensions: 0.10 x 1.25 x 18.00 inches
Warranty: 1 Year Warranty: Johnson Level warrants this product against defects in material and workmanship for one year after the confirmed purchase date. At its option, the company will replace or repair the product if it fails under normal use.
See On Amazon #24
Peachtree Woodworking Supply 12 Inch Long Anodized Aluminum Straight Edge Bar with .001 Tolerance | Perfect for Checking Straightness On Metal Surface Tops
Asin: B08VS7M9FL | Ean: 0817918021399 | UPC: 817918021399
Features
- Sometimes you need to have your work surface just right for your projects. Whether you re a woodworker, metal worker or hobbyist, when you need a flat work surface you simply just need it. Finding an economical tool to check for flatness used to be quite the challenge. Not anymore!
- Introducing the lightweight and easy to use Fulton Aluminum straight edge. Use the straight edge to properly check for flatness, so you can see if your work surface has any gaps, pits or any type of undulation that may catch, hook or slow down your material while feeding it through a blade, cutter or simply while working.
- The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even.
- The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even.
- The bars measure 3/8 thick by 1 tall which is just the right size to stand upright unsupported so you can free up both hands to make adjustments to your tools or table tops. The Fulton Aluminum Straight edge is the perfect for any workshop where accuracy is a must!
- See more on Amazon...
The Aluminum Straight Edge Is That Tool And It Is Accurate To Exacting Tolerances Which Makes It Perfect For Checking Wet Stones, Jointers, Planers, Power Tools, General Machinery, Table Tops, Counter Tops And More For Flatness. Works Exceptionally Well Where There Is A Seam To Make Sure Both Sides Are Absolutely Even..
The Bars Measure 3/8” Thick By 1¾” Tall Which Is Just The Right Size To Stand Upright Unsupported So You Can Free Up Both Hands To Make Adjustments To Your Tools Or Table Tops. The Fulton Aluminum Straight Edge Is The Perfect For Any Workshop Where Accuracy Is A Must!.
The Aluminum Straight Edge Is That Tool And It Is Accurate To Exacting Tolerances Which Makes It Perfect For Checking Wet Stones, Jointers, Planers, Power Tools, General Machinery, Table Tops, Counter Tops And More For Flatness. Works Exceptionally Well Where There Is A Seam To Make Sure Both Sides Are Absolutely Even..
Introducing The Lightweight And Easy To Use Fulton Aluminum Straight Edge. Use The Straight Edge To Properly Check For Flatness, So You Can See If Your Work Surface Has Any Gaps, Pits Or Any Type Of Undulation That May Catch, Hook Or Slow Down Your Material While Feeding It Through A Blade, Cutter Or Simply While Working..
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #25
Mitutoyo 528-104, 8" Knife Edge Straight Edge With Protective Cover
Asin: B003VM7XQI | Model: 528-104 | PartNumber: 528-104 | Ean: 0603908138495 | UPC: 603908138495
Features
- package height : 1.524 cm
- package length : 21.59 cm
- package width :3.81 cm
- Product type:PRECISION MEASURING
- See more on Amazon...
Package Width :3.81 Cm.
Product Type:Precision Measuring.
Package Length : 21.59 Cm.
Brand: Mitutoyo | Manufacturer: Mitutoyo
See On Amazon #26
Peachtree Woodworking Supply ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)
Asin: B07ZKS7Y3W | Ean: 0817918022433 | UPC: 817918022433
Features
- No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
- Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50 straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
- Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
- How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
- The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
- See more on Amazon...
Each Clamp Rail Is Manufactured With A Low Profile To Make Guiding Your Power Tool Along The Edge Much Easier. The Low Profile Has Also Been Designed With Guide Accessories In Mind. The Clamp Rails Accept Many Different Accessories (Sold Separately) Or Can Create Your Very Own Jigs And Fixtures To Use With The Progrip Straight Edge Guides. Each Progrip Straight Edge Guide Has The Exact Same Profile Regardless Of Length..
The Lock Lever On Each Clamp Can Be Secured Into One Of Three Positions, Each Position Provides Varying Amounts Of Pressure. Depending On Your Project Or Application, You May Need To Apply More Pressure By Securing The Lock Lever To The Appropriate Position. Once Secured, The Progrip Straight Edge Guide Clamp Is Designed To Have Zero Side To Side Play With Minimal Deflection To Provide You With The Ideal Straight Edge To Make Clean, Smooth Cuts Every Time!.
How Does It Work? Each Progrip Straight Edge Guide Clamp Has One Adjustable Jaw And One Fixed Jaw. The Fixed Jaw Typically Will Go Against The Edge Of The Board Closest To You. Once You Place The Clamp On Your Board With The Fixed Jaw Over The End, The Adjustable End Gets Drawn In Against The Opposite Side Of The Board. Once Set And Aligned, You Secure The Clamp By Simply Locking It Down With The 3 Position Lock Lever..
Cut Straight, True Lines With Circular Saws, Routers, Trim Routers, Jig Saws And Many Other Power Tools You Probably Own. These Clamps Are Ideal For Cutting Large Sheets Of Plywood In Half (With A 50” Straight Edge Guide). Each Clamp Is Identified By The Maximum Clamping Distance Between Jaws. Another Great Application For These Clamps Is Cutting Dado Slots For Bookshelves. The Alignment And Cutting Process For Dados Is So Much Easier Than Ever Before With The Progrip Straight Edge Guides..
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #27
Johnson Level & Tool J48EM Inch/Metric Straight Edge, 48", Silver, 1 Ruler
Asin: B0009WG5EE | Model: J48EM | PartNumber: J48EM | Ean: 0049448548361 | UPC: 049448548361
Features
- MEASURING TOOL: This heavy-duty straight edge by Johnson is impeccably designed for carpenters; metalworkers; builders and homeowners to use for a variety of measuring applications.
- QUALITY MATERIAL: Made in the United States; the Johnson measurement edge features a sturdy and durable aluminum construction along with a clear and protective anodized finish; which protects it from regular wear and abrasion.
- PRACTICAL DESIGN: Featuring an ergonomic design; this aluminum straight edge is easy to read with black bold screened and thermal bonded graduations in English and metric graduations like 1/8 in.; 1/6 in and 2mm.
- EASY STORAGE: The straight edge ruler has a hanging hole on the end; which helps you to keep it organized along with other woodworking tools and equipment.
- PRODUCT SPECIFICATION: This corrosion-resistant straight edge is 48 in. long and 2 in. wide. It works efficiently as a straight edge guide for different carpentry; installing; surveying and framing applications.
- See more on Amazon...
Practical Design: Featuring An Ergonomic Design; This Aluminum Straight Edge Is Easy To Read With Black Bold Screened And Thermal Bonded Graduations In English And Metric Graduations Like 1/8 In.; 1/6 In And 2Mm..
Product Specification: This Corrosion-Resistant Straight Edge Is 48 In. Long And 2 In. Wide. It Works Efficiently As A Straight Edge Guide For Different Carpentry; Installing; Surveying And Framing Applications..
Easy Storage: The Straight Edge Ruler Has A Hanging Hole On The End; Which Helps You To Keep It Organized Along With Other Woodworking Tools And Equipment..
Quality Material: Made In The United States; The Johnson Measurement Edge Features A Sturdy And Durable Aluminum Construction Along With A Clear And Protective Anodized Finish; Which Protects It From Regular Wear And Abrasion..
Brand: Johnson | Manufacturer: Johnson Level & Tool
Dimensions: 48.00 x 0.13 x 2.00 inches | Weight: 0.99 Pounds
Warranty: 1 Year Warranty: Johnson Level warrants this product against defects in material and workmanship for one year after the confirmed purchase date. At its option, the company will replace or repair the product if it fails under normal use.
See On Amazon #28
Central Tools 6475 18" Precision Straight Edge
Asin: B000HK9AIG | Model: 6475 | PartNumber: 6475 | Ean: 0051020076025, 0031113018781, 0971477605411, 0780538005332, 0088021751408, 0078053800533 | UPC: 088021751408, 078053800533, 780538005332, 971477605411, 051020076025, 031113018781
Features
- Designed to measure head, block and flywheel straightness
- Constructed from high quality heat treated steel
- Features an integrated hanging hole
- See more on Amazon...
Features An Integrated Hanging Hole.
Constructed From High Quality Heat Treated Steel.
Brand: Central Tools | Manufacturer: Central Tools
Dimensions: 0.50 x 18.50 x 2.50 Inches | Weight: 1.10 Pounds
Warranty: Repair only up to 90 days
See On Amazon #29
Starrett Steel Straight Edge, Not Beveled or Graduated - 18" (450mm) Length, 11/64" (4.4mm) Thickness, 1-13/32" (36mm) Width - 380-18
Asin: B0006J4EFW | Model: 380-18 | PartNumber: 380-18 | Ean: 0049659514391 | UPC: 049659514391
Features
- Designed for Precision - The Starrett 380 Series Steel Straight Edge is precision ground and nicely finished to rigid Starrett standards. It provides users with accurate and consistent results.
- Not Beveled or Graduated - This tool does not have a mark of units for measurements and a slope on its edges. It is unexcelled for drawing or scribing straight lines and checking surfaces for straightness.
- Easy to Use - The Starrett Steel Straight Edge thickness and design permit shape retention and accuracy. This tool is portable, easy to use and easy to handle.
- Best Performance - The 380 and 385 Series in sizes 36 and longer are marked with arrows at two suspension points. If the straight edges are brought to the work and used on edge, they should be suspended at these two points to minimize deflection.
- The Standard for Excellence - Manufacturing quality tools that provide consistent and reliable performance since 1880, Starrett's commitment has earned them a reputation as one of the most trusted names in the industry.
- See more on Amazon...
Easy To Use - The Starrett Steel Straight Edge Thickness And Design Permit Shape Retention And Accuracy. This Tool Is Portable, Easy To Use And Easy To Handle..
The Standard For Excellence - Manufacturing Quality Tools That Provide Consistent And Reliable Performance Since 1880, Starrett's Commitment Has Earned Them A Reputation As One Of The Most Trusted Names In The Industry..
Best Performance - The 380 And 385 Series In Sizes 36" And Longer Are Marked With Arrows At Two Suspension Points. If The Straight Edges Are Brought To The Work And Used On Edge, They Should Be Suspended At These Two Points To Minimize Deflection..
Not Beveled Or Graduated - This Tool Does Not Have A Mark Of Units For Measurements And A Slope On Its Edges. It Is Unexcelled For Drawing Or Scribing Straight Lines And Checking Surfaces For Straightness..
Brand: Starrett | Manufacturer: Starrett
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 1.20 Pounds
Warranty: 1 Year Limited
See On Amazon #30
BORA 50 NGX Clamp Edge, Straight Cut Guide for Circular Saws, Easy to Use, Great for Cross-Cutting Plywood Sheets and Routing Dados, 544050
Asin: B08146J2T8 | Model: 544050 | PartNumber: 544050 | Ean: 0814000019456 | UPC: 814000019456
Features
- Circular Saw Guide For Large Sheets: The Bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw
- Clamps Firmly: This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won t leave indentations and is easily adjustable to meet the length of your project
- Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use
- Use With Any Circular Saw: This guide is compatible with any brand of circular saw, not just Bora Tools. Use it with circular saws, routers, and jigsaws. For big projects, easily increase the length up to 100 in. by adding the Bora NGX 50-inch aluminum extension
- See more on Amazon...
Extreme Durability: Made Of Heavy-Gauge, Extruded Aluminum, It Is Rigid Enough To Resist Bowing And Hold A Straight Edge, And Durable Enough To Withstand Repeated Use.
Use With Any Circular Saw: This Guide Is Compatible With Any Brand Of Circular Saw, Not Just Bora Tools. Use It With Circular Saws, Routers, And Jigsaws. For Big Projects, Easily Increase The Length Up To 100 In. By Adding The Bora Ngx 50-Inch Aluminum Extension.
Clamps Firmly: This Straight Edge Guide Has A Wide Rubberized Clamp Face To Ensure A Tight Non-Slip Grip That Won’T Leave Indentations And Is Easily Adjustable To Meet The Length Of Your Project.
Brand: Bora | Manufacturer: Bora
Dimensions: 2.00 x 58.00 x 3.00 inches | Weight: 2.00 Pounds
Warranty: 1 year
See On Amazon
Looking For Something Else?
Search