Best Square Nose End Mills - Buying Guide
Last Updated: 05/26/2024
Share on
Bestselling Square Nose End Mills on Amazon
- sisona 1/2" Square Nose Carbide End Mill Bits - 4 Flutes 1/2" Diamter 3'' Overall Length - Sharpness...
- 8pcs 2-12mm CNC Square Nose End Mills,Carbide Tungsten Steel 4 Fultes Milling Cutter, Router Bits Ro...
- Kodiak Cutting Tools KCT150027 USA Made Solid Carbide End Mill for Aluminum High Performance 45 Degr...
- SPEED TIGER Micrograin Carbide Square End Mill - 4 Flute - ISE1/16"4T (5 Pieces, 1/16") - for Millin...
- F&D Tool Company 18992-XL918 Multiple Flute Square Nose End Mill, Single End, Extra Long, Premium Co...
- Kodiak Cutting Tools KCT130876 USA Made Solid Carbide End Mill, Single End, 4 Flute, 1/4" Shank, 3/4...
- JIULI TOOL 6pcs Carbide End Mills Set Square Nose 3 Flutes End Mill for Aluminum Alloy DLC Coating HRC 55
- YG-1 E2172 Cobalt Steel Square Nose End Mill, Long Reach, Weldon Shank, Uncoated (Bright) Finish, Ro...
- Accusize Industrial Tools Standard Tooth M42 8% Cobalt Tialn Roughing End Mill, 3/4'' by 3/4'' by 1-...
- Shars 3/16-3/4" 4 Flute HSS Single End Center Cut End Mill Set 10PCS 404-5872 M)
#1
sisona 1/2" Square Nose Carbide End Mill Bits - 4 Flutes 1/2" Diamter 3'' Overall Length - Sharpness Durable Smooth Cutting
Asin: B0BKSML38K
Features
- sisona Carbide End Mill -- Cutting Diameter: 1/2 inch Shank Diameter:1/2 inch Cutting Length:1 inch Overall Length:3 inch
- Applicable Materials: usually used for steel Carbon steel/Alloy steel/Hardened steel/Cast lron, etc.
- Wide Compatibility: sisona end mill bits are compatible with most desktop CNC machines, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
- High Quality:made from solid tungsten carbide (TC) have a Titanium Nitride (TiN) surface to improve heat resistance and reduce wear.
- Used it strictly for steel, it worked great for that, eats metal fast beautiful surface finish!Watch your stick out and travel speeds.
- See more on Amazon...
Wide Compatibility: Sisona End Mill Bits Are Compatible With Most Desktop Cnc Machines, As Well As Other Industrial Cnc Machines. Just Make Sure You Select The Correct-Sized Collet For Your Device..
Used It Strictly For Steel, It Worked Great For That, Eats Metal Fast ，Beautiful Surface Finish!Watch Your Stick Out And Travel Speeds..
High Quality:Made From Solid Tungsten Carbide (Tc)，Have A Titanium Nitride (Tin) Surface To Improve Heat Resistance And Reduce Wear..
Applicable Materials: Usually Used For Steel（Carbon Steel/Alloy Steel/Hardened Steel/Cast Lron, Etc.）.
Brand: sisona | Manufacturer: sisona
Dimensions: 0.59 x 3.35 x 0.59 inches
See On Amazon #2
8pcs 2-12mm CNC Square Nose End Mills,Carbide Tungsten Steel 4 Fultes Milling Cutter, Router Bits Rotary Bits Tool Straight Shank 2-12mm
Asin: B091DN8B1M | Model: 01 | PartNumber: 01 | Ean: 8414740896717
Brand: Hunricho | Manufacturer: Home of quality tools
See On Amazon #3
Kodiak Cutting Tools KCT150027 USA Made Solid Carbide End Mill for Aluminum High Performance 45 Degree Helix, 3 Flute, Long Series, 1-1/4" Length of Cut, 3" Overall Length, 1/4" Diameter
Asin: B0070YYCU8 | Model: KODIAK150027 | PartNumber: KODIAK150027
Features
- Premium Sub-Micrograin Carbide End Mill Made In the USA
- High Performance Long Series Tool
- 1/4 Shank Diameter, 1-1/4 Length of Cut
- 3 Overall Length Center Cutting Carbide Endmill
- 3 Flutes, 45 Degree Helix for Aluminum
- See more on Amazon...
1/4" Shank Diameter, 1-1/4" Length Of Cut.
3 Flutes, 45 Degree Helix For Aluminum.
3" Overall Length Center Cutting Carbide Endmill.
High Performance Long Series Tool.
Brand: Kodiak Cutting Tools | Manufacturer: Kodiak Cutting Tools
Weight: 0.02 Pounds
See On Amazon #4
SPEED TIGER Micrograin Carbide Square End Mill - 4 Flute - ISE1/16"4T (5 Pieces, 1/16") - for Milling Alloy Steels, Hardened Steel, Metal & More Mill Bits Sets for DIYers & Professionals
Asin: B07FSRQHN5 | Model: ISE1-16-4T | PartNumber: ISE1-16-4T | Ean: 4712805504657
Features
- APPLICATION - Our carbide tools are highly effective at machining various types of steel such as Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~47), and Cast Iron.
- AlTiBN COATING - This coating, made of titanium aluminum boron nitride (AlTiBN), offers exceptional stability at high temperatures and surpasses the heat resistance of TiAlN, TiN, or TiCN coatings.
- HIGH-PERFORMANCE MATERIAL - This end mill is made from micrograin carbide, which gives it exceptional toughness, durability, and machinability. It performs brilliantly and is an excellent value for its price.
- FINE WORKMANSHIP - Our products deliver outstanding high accuracy with an error of -0.02mm, empowering users to achieve professional cutting quality effortlessly.
- DEDICATED SUPPORT - Please don't hesitate to contact us on Amazon if you need the Cutting Condition Data. We want to ensure you receive the best product that meets your requirements.
- See more on Amazon...
✅ High-Performance Material - This End Mill Is Made From Micrograin Carbide, Which Gives It Exceptional Toughness, Durability, And Machinability. It Performs Brilliantly And Is An Excellent Value For Its Price..
✅ Dedicated Support - Please Don't Hesitate To Contact Us On Amazon If You Need The Cutting Condition Data. We Want To Ensure You Receive The Best Product That Meets Your Requirements..
✅ Fine Workmanship - Our Products Deliver Outstanding High Accuracy With An Error Of -0.02Mm, Empowering Users To Achieve Professional Cutting Quality Effortlessly..
✅ Altibn Coating - This Coating, Made Of Titanium Aluminum Boron Nitride (Altibn), Offers Exceptional Stability At High Temperatures And Surpasses The Heat Resistance Of Tialn, Tin, Or Ticn Coatings..
Brand: SPEED TIGER | Manufacturer: SPEED TIGER
Weight: 0.03 pounds
See On Amazon #5
F&D Tool Company 18992-XL918 Multiple Flute Square Nose End Mill, Single End, Extra Long, Premium Cobalt Steel, 1/2" Mill Diameter, 1/2" Shank Diameter, 3" Flute Length, 5" Overall Length, 4 Number of Flutes
Asin: B00GWR9IXK | Model: 18992-XL918 | PartNumber: 18992-XL918
Features
- Multiple Flute Endmill - Single End - Extra long - Premium Cobalt Steel
- Mill Diameter: 1/2 - Shank Diameter: 1/2 - Flute Length: 3 - Overall Length: 5 - Number of Flutes: 4
- Regularly furnished with right hand cut and right hand spiral
- Made in USA
- See more on Amazon...
Regularly Furnished With Right Hand Cut And Right Hand Spiral.
Made In Usa.
Mill Diameter: 1/2 - Shank Diameter: 1/2 - Flute Length: 3 - Overall Length: 5 - Number Of Flutes: 4.
First Available: 05/15/2017
Brand: F&D Tool Company | Manufacturer: F&D Tool Company
See On Amazon #6
Kodiak Cutting Tools KCT130876 USA Made Solid Carbide End Mill, Single End, 4 Flute, 1/4" Shank, 3/4" Length of Cut, 2-1/2" Overall Length, 1/4" Diameter
Asin: B0070YYN4I | Model: KODIAK130876 | PartNumber: KODIAK130876
3/4 Length Of Cut.
4 Flutes.
2-1/2 Overall Length.
1/4 Shank Diameter.
Brand: Kodiak Cutting Tools | Manufacturer: Kodiak Cutting Tools
Weight: 0.00 Pounds
See On Amazon #7
JIULI TOOL 6pcs Carbide End Mills Set Square Nose 3 Flutes End Mill for Aluminum Alloy DLC Coating HRC 55
Asin: B0BCG8Y5CS | Model: 55 3F DLC 6pcs 1-6 | PartNumber: 55 3F DLC 6pcs 1-6
Features
- [1]Package: DLC Square Nose end mills 6pcs. [2] Dimensions include: (d1x3Cx4Dx50L)+(d2x6Cx4Dx50L)+(d3x8Cx4Dx50L)+(d4x10Cx4Dx50L)+(d5x13Cx6Dx50L)+(d6x15Cx6Dx50L), Annotation: d=Flutes Diameter, D=Shank Diameter, C=Flutes Length, L=Full length.
- [3]Material:Solid Carbide End Mills, tungsten steel bar, helix angle + large core diameter. [4] Main features: DLC color coating ensures the wear resistance and stability of the tool in the process of large feed and large cutting. Double margin + arc-shaped margin design, high strength and anti-vibration, make the surface of the workpiece smooth. The sharp positive cutting edge design reduces cutting resistance and improves work efficiency.
- [5]Applicable cutting materials: aluminum, copper, aluminum alloy, magnesium alloy, zinc alloy, can directly and quickly cut aluminum 6061.
- [6]Processing methods: helical machining, U-shaped machining, side machining, plane machining, grooving, which can be used for rough machining and finishing machining.
- [7] Applicable machine tools: CNC machining centers, engraving machines, precision engraving machines and other high-speed machines.
- See more on Amazon...
[5]Applicable Cutting Materials: Aluminum, Copper, Aluminum Alloy, Magnesium Alloy, Zinc Alloy, Can Directly And Quickly Cut Aluminum 6061..
[7] Applicable Machine Tools: Cnc Machining Centers, Engraving Machines, Precision Engraving Machines And Other High-Speed Machines..
[6]Processing Methods: Helical Machining, U-Shaped Machining, Side Machining, Plane Machining, Grooving, Which Can Be Used For Rough Machining And Finishing Machining..
[3]Material:Solid Carbide End Mills, Tungsten Steel Bar, Helix Angle + Large Core Diameter. [4] Main Features: Dlc Color Coating Ensures The Wear Resistance And Stability Of The Tool In The Process Of Large Feed And Large Cutting. Double Margin + Arc-Shaped Margin Design, High Strength And Anti-Vibration, Make The Surface Of The Workpiece Smooth. The Sharp Positive Cutting Edge Design Reduces Cutting Resistance And Improves Work Efficiency..
Brand: JIULI TOOL | Manufacturer: JIULI TOOL
See On Amazon #8
YG-1 E2172 Cobalt Steel Square Nose End Mill, Long Reach, Weldon Shank, Uncoated (Bright) Finish, Roughing Cut, Non-Center Cutting, 30 Deg Helix, 4 Flutes, 5.25" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080C9VNC | Model: 62359 | PartNumber: 62359
Features
- Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills
- Coarse-pitch tooth design and tool geometry are suitable for high-production metal removal on cutting- steel grades and many nonferrous materials
- Long-length end mills have longer cutting edges than standard- and medium-length end mills for increased cutting length
- Number of flutes varies by diameter for optimum feed and cut rate
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- See more on Amazon...
Long-Length End Mills Have Longer Cutting Edges Than Standard- And Medium-Length End Mills For Increased Cutting Length.
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Number Of Flutes Varies By Diameter For Optimum Feed And Cut Rate.
Coarse-Pitch Tooth Design And Tool Geometry Are Suitable For High-Production Metal Removal On Cutting- Steel Grades And Many Nonferrous Materials.
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #9
Accusize Industrial Tools Standard Tooth M42 8% Cobalt Tialn Roughing End Mill, 3/4'' by 3/4'' by 1-5/8'' Flt Length, 1102-0034
Asin: B00SZ7OPMO | Model: 1102-0034 | PartNumber: 1102-0034 | Ean: 0641799800800 | UPC: 641799800800
Features
- TiAlN Coated, Center cutting, M42-8% Premium cobalt, Flutes ground by a world-class IS-9002 Factory, CNC Qualified
- Diameter: 3/4''; Shank Diameter: 3/4''; Flute length: 1-5/8''; Overall Length: 3-3/4''; 4 Flute, Coarse Tooth
- Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.
- Used for aggressive machining. Performance approaching solid carbide with tough H.S.S Tools. Recommended for abrasive materials.
- Excellent performance in hard materials that are difficult to cut. Extremely hard, wear resistant.
- TiAlN Coating for Enhanced Performance: Superior wear resistance extends tool life across various materials.
- High-Quality M42-8% Cobalt Alloy: Delivers exceptional durability and heat resistance for challenging applications.
- Precision-Ground Flutes: Crafted in an ISO-9002 certified facility for efficient material removal and superior finishes.
- Optimal Dimensions for Precision Milling: 3/4 cutting diameter, 3/4 shank diameter, 1-5/8 flute length, and 3-3/4 overall length.
- Versatile 4-Flute Design: Ideal for a broad range of milling operations with efficient chip removal and a fine finish.
- See more on Amazon...
Produces A Smooth Finish That Often Eliminates The Need For A Finishing Cut For Profiling And Shallow Slots..
Versatile 4-Flute Design: Ideal For A Broad Range Of Milling Operations With Efficient Chip Removal And A Fine Finish..
High-Quality M42-8% Cobalt Alloy: Delivers Exceptional Durability And Heat Resistance For Challenging Applications..
Precision-Ground Flutes: Crafted In An Iso-9002 Certified Facility For Efficient Material Removal And Superior Finishes..
Excellent Performance In Hard Materials That Are Difficult To Cut. Extremely Hard, Wear Resistant..
Tialn Coating For Enhanced Performance: Superior Wear Resistance Extends Tool Life Across Various Materials..
Used For Aggressive Machining. Performance Approaching Solid Carbide With Tough H.S.S Tools. Recommended For Abrasive Materials..
Optimal Dimensions For Precision Milling: 3/4" Cutting Diameter, 3/4" Shank Diameter, 1-5/8" Flute Length, And 3-3/4" Overall Length..
Diameter: 3/4''; Shank Diameter: 3/4''; Flute Length: 1-5/8''; Overall Length: 3-3/4''; 4 Flute, Coarse Tooth.
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 3.94 x 1.18 x 1.18 inches | Weight: 0.90 Kilograms
See On Amazon #10
Shars 3/16-3/4" 4 Flute HSS Single End Center Cut End Mill Set 10PCS 404-5872 M)
Asin: B082325KW2
Brand: Shars | Manufacturer: Shars
See On Amazon #11
SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall
Asin: B083K79L2C
Features
- Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
- Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
- For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
- The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4 Collet
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
- See more on Amazon...
For Cnc Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy Etc.
End Mill Bits Are Suitable For Side Milling, End Milling, Finish Machining, Etc..
The Endmill Suit For Cnc Router And Makita, Bosch, And Any Brand Plunge Router With 1/4" Collet.
Flat Top With 2-Flute, Material: Solid Carbide With Tialn Coated For Hrc 55.
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #12
SPEED TIGER Carbide Square Nose End Mill with ZrN Coating - 2 Flute - IAE5-3/8"2T-ZrN (1 Piece, 3/8")- for Milling Aluminum Applications Mill Bits Sets for DIYers & Professionals
Asin: B0CWV4D4WV
Features
- APPLICATION - This carbide tool from Speed Tiger is highly proficient in working with aluminum and copper materials.
- ZrN Coating: Experience enhanced stability at high temperatures and superior wear resistance at high cutting speeds. The ZrN coating acts as as lubricant for the end mill, ensuring better surface quality.
- HIGH-PERFORMANCE MATERIAL - Crafted from micrograin carbide, this end mill offers exceptional toughness, durability, and machinability, delivering outstanding performance and great value for its price.
- FINE WORKMANSHIP - Our products deliver outstanding high accuracy with an error of -0.02mm, empowering users to achieve professional cutting quality effortlessly.
- DEDICATED SUPPORT - Please don't hesitate to contact us on Amazon if you need the Cutting Condition Data. We want to ensure you receive the best product that meets your requirements.
- See more on Amazon...
High-Performance Material - Crafted From Micrograin Carbide, This End Mill Offers Exceptional Toughness, Durability, And Machinability, Delivering Outstanding Performance And Great Value For Its Price..
✅ Dedicated Support - Please Don't Hesitate To Contact Us On Amazon If You Need The Cutting Condition Data. We Want To Ensure You Receive The Best Product That Meets Your Requirements..
✅ Fine Workmanship - Our Products Deliver Outstanding High Accuracy With An Error Of -0.02Mm, Empowering Users To Achieve Professional Cutting Quality Effortlessly..
Zrn Coating: Experience Enhanced Stability At High Temperatures And Superior Wear Resistance At High Cutting Speeds. The Zrn Coating Acts As As Lubricant For The End Mill, Ensuring Better Surface Quality..
Brand: SPEED TIGER | Manufacturer: SPEED TIGER
See On Amazon #13
AYCHOLIZ 1/4" Solid Carbide Square Nose End Mills Set 65HRC Tungsten Steel Milling Cutter 4 Flute CNC Milling Bits for Stainless Steel Hardness Steel
Asin: B0C2TJG5K8 | Ean: 0749686525895 | UPC: 749686525895
Features
- Package Included: 1pc square nose end mill. Cutting diameter: 1/4inch; Shank diameter: 1/4inch ; Flute cutting length: 3/4Inch; Overall length: 2-1/2Inch.
- NACO Coating: NACO coating can improve the oxidation resistance,high temperature resistance and wear resistance of the workpiece. The hardness of the coating can reach 4500HV, and it has strong wear resistance.it's service life is five to six times longer than other coated tools.
- Strong and Durable: Milling cutter is made of tungsten carbide material, it is high-wearable and has a long life; 4 flutes 45 helix angle design,great for speedy cuttingSmooth cutting and fast chip-removal, gives outstanding cutting performance and wear resistance.
- Application: AYCHOLIZ End mill bits are suitable for side milling, slot milling,step milling,drilling, etc.Suitable for carbon steel,alloy steel(HRC50),PH Feritic,Martensitic steel,Stainless steel,High hardness steel(HRC63),Superhard material(HRC65),etc.
- Tips: AYCHOLIZ End mill bits are compatible with most desktop CNC machines, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
- See more on Amazon...
Strong And Durable: Milling Cutter Is Made Of Tungsten Carbide Material, It Is High-Wearable And Has A Long Life; 4 Flutes 45° Helix Angle Design,Great For Speedy Cuttingsmooth Cutting And Fast Chip-Removal, Gives Outstanding Cutting Performance And Wear Resistance..
Tips: Aycholiz End Mill Bits Are Compatible With Most Desktop Cnc Machines, As Well As Other Industrial Cnc Machines. Just Make Sure You Select The Correct-Sized Collet For Your Device..
Application: Aycholiz End Mill Bits Are Suitable For Side Milling, Slot Milling,Step Milling,Drilling, Etc.Suitable For Carbon Steel,Alloy Steel(Hrc50),Ph Feritic,Martensitic Steel,Stainless Steel,High Hardness Steel(Hrc63),Superhard Material(Hrc65),Etc..
Naco Coating: Naco Coating Can Improve The Oxidation Resistance,High Temperature Resistance And Wear Resistance Of The Workpiece. The Hardness Of The Coating Can Reach 4500Hv, And It Has Strong Wear Resistance.It's Service Life Is Five To Six Times Longer Than Other Coated Tools..
Brand: AYCHOLIZ | Manufacturer: AYCHOLIZ
See On Amazon #14
SPEED TIGER Carbide Square End Mill - ISE 4T (5 Piece Set: 1/8", 1/4", 3/16", 5/16 , 3/8 ) - for Drilling Alloy or Hardened Steel, Metal & More - 4 Flute Mill Bits Sets for DIYers & Professionals
Asin: B0CWV82RGK
Features
- TiSiN COATING - nano-composite coating material with extraordinary heat resistance (1100 ) and hardness (HV 3600) doubles efficiency in high-speed, hardened steel cutting, offering longer life, reliability, and cost savings. Suitable for dry machining, it ensures higher tolerance and smoother finishes.
- APPLICATION - Our carbide tools are highly effective at machining various types of steel such as Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~45), and Cast Iron.
- HIGH-PERFORMANCE MATERIAL - This end mill is made from micrograin carbide, which gives it exceptional toughness, durability, and machinability. It performs brilliantly and is an excellent value for its price.
- FINE WORKMANSHIP - Our products deliver outstanding high accuracy with an error of -0.02mm, empowering users to achieve professional cutting quality effortlessly.
- DEDICATED SUPPORT - Please don't hesitate to contact us on Amazon if you need the Cutting Condition Data. We want to ensure you receive the best product that meets your requirements.
- See more on Amazon...
✅ High-Performance Material - This End Mill Is Made From Micrograin Carbide, Which Gives It Exceptional Toughness, Durability, And Machinability. It Performs Brilliantly And Is An Excellent Value For Its Price..
✅ Dedicated Support - Please Don't Hesitate To Contact Us On Amazon If You Need The Cutting Condition Data. We Want To Ensure You Receive The Best Product That Meets Your Requirements..
✅ Fine Workmanship - Our Products Deliver Outstanding High Accuracy With An Error Of -0.02Mm, Empowering Users To Achieve Professional Cutting Quality Effortlessly..
✅ Application - Our Carbide Tools Are Highly Effective At Machining Various Types Of Steel Such As Carbon Steels (~Hb225), Alloy Steels (Hb225~325), Pre-Hardened Steels (Up To Hrc45), Hardened Steels (Hrc40~45), And Cast Iron..
Brand: SPEED TIGER | Manufacturer: SPEED TIGER
Weight: 0.33 Pounds
See On Amazon #15
XYunEnZ ISB 3/32 Carbide Square Nose End Mill Set, 4 Flute Micro Grain Carbide End Mill Bits for Alloy Steels/Hardened Steels/Aluminum/Copper, Suitable for DIYers and Professionals, 5 Pcs
Asin: B0C6MKL65X
Features
- SPECIFICATION: 3/32" diameter, 3/8" flute length, 1/8" shank diameter, 1-1/2" overall length. Each milling cutter packed in a solid plastic tube individually.
- AlTiN COATING: Solid carbide material with AlTiN coating can be used for dry or semi-dry cutting operations. The coated CNC router bits can increase machining efficiency, improve machining accuracy, extend tool life and reduce machining costs. AlTiN coating has a higher hardness than TiAlN coating and is a good coating choice for high speed machining.
- APPLICATION: Our carbide square nose end mills are apply to wood, titanium, aluminum, MDF, cast iron, carbon steels, alloy steels, hardened steels, nonferrous material, etc.
- ROBUST CONSTRUCTION: Precision ground from solid carbide rods and 4-flute square nose end mill cut consistently and accurately with a smooth kerf.
- CUSTOMER CARE: Our high quality milling tools will be a good helper at work. If any product problems upon receiving, please let us know. We will help you within 24 hours.
- See more on Amazon...
Application: Our Carbide Square Nose End Mills Are Apply To Wood, Titanium, Aluminum, Mdf, Cast Iron, Carbon Steels, Alloy Steels, Hardened Steels, Nonferrous Material, Etc..
Customer Care: Our High Quality Milling Tools Will Be A Good Helper At Work. If Any Product Problems Upon Receiving, Please Let Us Know. We Will Help You Within 24 Hours..
Robust Construction: Precision Ground From Solid Carbide Rods And 4-Flute Square Nose End Mill Cut Consistently And Accurately With A Smooth Kerf..
Altin Coating: Solid Carbide Material With Altin Coating Can Be Used For Dry Or Semi-Dry Cutting Operations. The Coated Cnc Router Bits Can Increase Machining Efficiency, Improve Machining Accuracy, Extend Tool Life And Reduce Machining Costs. Altin Coating Has A Higher Hardness Than Tialn Coating And Is A Good Coating Choice For High Speed Machining..
Brand: XYunEnZ | Manufacturer: XYunEnZ
See On Amazon #16
SpeTool 5Pcs 2-Flute Square Nose Carbide End Mill 1/8 Inch Router Bit with 1/8 inch Shank CNC Machine Tools, TiAlN Coated
Asin: B07S4G47XF | Model: P2E-1/8-5Pcs | PartNumber: P2E-1/8-5Pcs
Features
- ENDMILL SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length
- SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8 collet
- PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology; long service life, not easy to break; excellent cutting results and enhanced productivity
- WIDE APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc; suitable for side milling, end milling, finish machining, etc.
- PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box
- See more on Amazon...
Premium Quality. Made Of High Quality Tungsten Carbide, Precision Edge-Grinding Technology; Long Service Life, Not Easy To Break; Excellent Cutting Results And Enhanced Productivity.
Package Include. 5 Pieces High Quality End Mill Pack In A Individual Plastic Box.
Wide Application. For Cnc, Engraving Machine, Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy Etc; Suitable For Side Milling, End Milling, Finish Machining, Etc..
Specification. Flat Top, 2-Flute, Hrc55 With Tialn Coated, Use 1/8" Collet.
Brand: SpeTool | Manufacturer: SpeTool
Dimensions: 0.04 x 1.50 x 0.13 inches
See On Amazon #17
Accusize Industrial Tools 20 Pc Hss Tin Coated End Mill Set, 2 Flute and 4 Flute, Cutting Diameter from 3/16'' up to 3/4'', 1810-0100
Asin: B01FGFFDAU | Model: 1810-0100 | PartNumber: 1810-0100 | Ean: 0641799801654, 0663566003948, 7241871027823 | UPC: 663566003948, 641799801654
Features
- H.S.S.
- Straight Shank.
- One of each size in both 2 & 4 flute: with 3/8'' shank:3/16'', 1/4'', 5/16'', 3/8'', 7/16'', With 1/2'' shank: 1/2'',9/16'', With 5/8'' shank: 5/8'',11/16'', With 3/4'' shank: 3/4''
- 2 Flutes End Mills: These end mills have a cutting diameter ranging from 3/16 to 3/4, a shank diameter ranging from 3/8 to 3/4, a flute length ranging from 7/16 to 1-5/16, and an overall length ranging from 2-5/16 to 3-9/16.
- 4 Flutes End Mills: These end mills have a cutting diameter ranging from 3/16 to 3/4, a shank diameter ranging from 3/8 to 3/4, a flute length ranging from 1/2 to 1-5/8, and an overall length ranging from 2-3/8 to 3-3/8.
- Versatile Cutting Range: Features end mills from 3/16 to 3/4 in both 2F & 4F, suitable for various material and application needs.
- Durable H.S.S. with TiN Coating: High-speed steel construction with Titanium Nitride coating for enhanced longevity and performance.
- Shank Size Variety: Includes 3/8, 1/2, 5/8, and 3/4 shanks, ensuring compatibility with a wide range of milling machines.
- Application Specific Design: 4-flute for steel and 2-flute for wood, plastics, aluminum, and non-ferrous metals, covering a broad machining spectrum.
- Comprehensive Milling Operations: Ideal for face, ramping, slot, plunge, and pocket milling, offering flexibility in machining strategies.
- See more on Amazon...
One Of Each Size In Both 2 & 4 Flute: With 3/8'' Shank:3/16'', 1/4'', 5/16'', 3/8'', 7/16'', With 1/2'' Shank: 1/2'',9/16'', With 5/8'' Shank: 5/8'',11/16'', With 3/4'' Shank: 3/4''.
Comprehensive Milling Operations: Ideal For Face, Ramping, Slot, Plunge, And Pocket Milling, Offering Flexibility In Machining Strategies..
Durable H.S.S. With Tin Coating: High-Speed Steel Construction With Titanium Nitride Coating For Enhanced Longevity And Performance..
Shank Size Variety: Includes 3/8", 1/2", 5/8", And 3/4" Shanks, Ensuring Compatibility With A Wide Range Of Milling Machines..
4 Flutes End Mills: These End Mills Have A Cutting Diameter Ranging From 3/16" To 3/4", A Shank Diameter Ranging From 3/8" To 3/4", A Flute Length Ranging From 1/2" To 1-5/8", And An Overall Length Ranging From 2-3/8" To 3-3/8"..
Versatile Cutting Range: Features End Mills From 3/16" To 3/4" In Both 2F & 4F, Suitable For Various Material And Application Needs..
2 Flutes End Mills: These End Mills Have A Cutting Diameter Ranging From 3/16" To 3/4", A Shank Diameter Ranging From 3/8" To 3/4", A Flute Length Ranging From 7/16" To 1-5/16", And An Overall Length Ranging From 2-5/16" To 3-9/16"..
Application Specific Design: 4-Flute For Steel And 2-Flute For Wood, Plastics, Aluminum, And Non-Ferrous Metals, Covering A Broad Machining Spectrum..
Straight Shank..
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 5.91 x 11.81 x 3.94 inches
See On Amazon #18
SPEED TIGER Carbide Square End Mill - ISE 4T (3 Piece Set: 5/16 , 3/8 , 1/2 ) - for Drilling Alloy or Hardened Steel, Metal & More - 4 Flute Mill Bits Sets for DIYers & Professionals
Asin: B0B7WP3GDX | Model: ISE-SET_5-16_3-8_1-2_4T | PartNumber: ISE-SET_5-16_3-8_1-2_4T
Features
- APPLICATION - Our carbide tools are highly effective for working with Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~45), and Cast Iron.
- AlTiBN COATING - This coating, made of titanium aluminum boron nitride (AlTiBN), offers exceptional stability at high temperatures and surpasses the heat resistance of TiAlN, TiN, or TiCN coatings.
- HIGH-PERFORMANCE MATERIAL - This end mill is made from micrograin carbide, which gives it exceptional toughness, durability, and machinability. It performs brilliantly and is an excellent value for its price.
- FINE WORKMANSHIP - Our products deliver outstanding high accuracy with an error of -0.02mm, empowering users to achieve professional cutting quality effortlessly.
- DEDICATED SUPPORT - Please don't hesitate to contact us on Amazon if you need the Cutting Condition Data. We want to ensure you receive the best product that meets your requirements.
- See more on Amazon...
✅ High-Performance Material - This End Mill Is Made From Micrograin Carbide, Which Gives It Exceptional Toughness, Durability, And Machinability. It Performs Brilliantly And Is An Excellent Value For Its Price..
✅ Dedicated Support - Please Don't Hesitate To Contact Us On Amazon If You Need The Cutting Condition Data. We Want To Ensure You Receive The Best Product That Meets Your Requirements..
✅ Fine Workmanship - Our Products Deliver Outstanding High Accuracy With An Error Of -0.02Mm, Empowering Users To Achieve Professional Cutting Quality Effortlessly..
✅ Altibn Coating - This Coating, Made Of Titanium Aluminum Boron Nitride (Altibn), Offers Exceptional Stability At High Temperatures And Surpasses The Heat Resistance Of Tialn, Tin, Or Ticn Coatings..
Brand: SPEED TIGER | Manufacturer: SPEED TIGER
Dimensions: 0.39 x 2.09 x 2.60 inches
See On Amazon #19
Drill America 7/16" Carbide 4 Flute Single End End Mill, MMO Series
Asin: B006KVBFS4 | Model: MMO7/16-4FSE | PartNumber: MMO7/16-4FSE | Ean: 0887861162920 | UPC: 887861162920
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Available in polished finish
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4 Flute single end
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4 Flute Single End.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Available In Polished Finish.
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #20
uxcell Square Nose End Mill, 1mm Tip Dia Solid Carbide AlTiN Coated CNC Router Bits 4 Flute Spiral Milling Cutter HRC45 with 4mm Shank 50mm (2-inch) Length, 2pcs
Asin: B09T3N6WHD | Model: a22010500ux0268 | PartNumber: a22010500ux0268
Features
- Square Nose End Mill: Cutting Diameter: 1mm / 0.04"; cutting flute length: 3mm / 0.12"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: HRC45; spiral angle: 35 degree.
- Solid Carbide Tool: P05 carbide end mill cutter is high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Features: Square end cut, 4-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. AlTiN composite coating can increase hardness, reduce oxidation wear for better wear resistance and extend tool life.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- See more on Amazon...
Wide Applications: Suitable For Cutting Carbon Steel, Malleable Cast Iron, Alloy Steel, Die Steel, Etc. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Obtain Better Processing Accuracy And Performance..
Features: Square End Cut, 4-Flute Design, Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. Altin Composite Coating Can Increase Hardness, Reduce Oxidation Wear For Better Wear Resistance And Extend Tool Life..
Solid Carbide Tool: P05 Carbide End Mill Cutter Is High Hardness, Wear Resistance, And Heat Resistance. Carbide Material With Good Milling And Cutting Performance, Ensures High Work Efficiency. Carbide Can Run At Higher Speed Than High-Speed Steel..
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search