Best Mechanical Vibration Damping Clamps - Buying Guide
Last Updated: 05/26/2024
Share on
Bestselling Mechanical Vibration Damping Clamps on Amazon
- SANTIE 304 Stainless Steel Cable Clamps - 5/8" ID, Vibration-Damping Loop Clamp with Neoprene Rubber...
- PATIKIL Vibration Isolation Washer 1.2" OD 0.4" ID 0.3" Thick, 8 Pack Rubber Round Anti Mechanical D...
- Lovejoy 68514425003 BR-27 Steel Clamp
- NATGAI Ceiling Spring Vibration Isolator Hangers for A/C Air Handler Bedroom Theater Studio, Anti Vi...
- 12 Pack Rubber Feet,High Damping Vibration Damping Rubber Ring for Electric Motor,Refrigeration Comp...
- M8x23mm Rubber Studs Shock Absorber Anti-Vibration Isolator Mounts, 30x20mm Rubber Cylindrical Vibra...
- AMGSH Ceiling Vibration Damping Mounts, 4 Pack Spring Vibration Isolator Hangers, 110Lb Capacity, 1....
- 2 Sheet Anti Vibration Pads Shock Absorbing Mat 70 Durometer 12 x 6 x 0.125 Inch Isolation Damping M...
- uxcell M6 Male Female Rubber Mounts,Vibration Isolators,Shock Absorber 20mm x 10mm 8pcs
- Cherbo Rubber Studs Shock Absorber M8 30x20mm 4 Pack Anti Vibration Rubber Isolator Mounts Cylindric...
#1
SANTIE 304 Stainless Steel Cable Clamps - 5/8" ID, Vibration-Damping Loop Clamp with Neoprene Rubber Cushion, 5-Pack
Asin: B09W18NK8Z
Features
- A molded cushion reduces vibration and wear from clamp edges, plus provides a tighter fit around material than standard vibration-damping loop clamps.
- stainless steel hex head bolt and nut FastenersIncluded.Clamps surround lines completely while holding them close to the mounting surface.
- Neoprene cushions are for use in environments where clamps are exposed to oil and ozone.304 and 321 stainless steel clamps have excellent corrosion resistance.
- The R-shaped design is easy to install and disassemble. You only need bolts and nuts to easily complete your installation work.
- The cable clamp is suitable for scenes such as automobile, industry, home decoration, etc. Whether it is wiring or line management or repair, these high-quality products will be your best helper.
- See more on Amazon...
Neoprene Cushions Are For Use In Environments Where Clamps Are Exposed To Oil And Ozone.304 And 321 Stainless Steel Clamps Have Excellent Corrosion Resistance..
The Cable Clamp Is Suitable For Scenes Such As Automobile, Industry, Home Decoration, Etc. Whether It Is Wiring Or Line Management Or Repair, These High-Quality Products Will Be Your Best Helper..
The R-Shaped Design Is Easy To Install And Disassemble. You Only Need Bolts And Nuts To Easily Complete Your Installation Work..
Stainless Steel Hex Head Bolt And Nut Fastenersincluded.Clamps Surround Lines Completely While Holding Them Close To The Mounting Surface..
Brand: SANTIE | Manufacturer: SANTIE
Dimensions: 0.79 x 4.72 x 4.72 inches | Weight: 0.11 Kilograms
See On Amazon #2
PATIKIL Vibration Isolation Washer 1.2" OD 0.4" ID 0.3" Thick, 8 Pack Rubber Round Anti Mechanical Damping Feet Pads, Black
Asin: B0BTHJ35WJ | Model: pta221024tt0732 | PartNumber: pta221024tt0732
Features
- Color: Black; Shape: Round; Outer Diameter: 30mm / 1.18 inch; Inner Diameter: 10mm / 0.39 inch; Thickness: 8mm / 0.31 inch; Packing List: 8 x Damping Pads
- Advantage: Made of rubber features waterproof and moisture-proof, good toughness, anti-collision, high and low temperature resistance, acid and alkali resistance, not easy to deform and age
- Instruction: Simple to use with no need for additional tools, suitable for noise reduction, foot pad, stopper and more
- Application: The vibration isolation washer has great vibration absorption and noise reduction. Can be used as feet, stops, and protectors for machinery equipment, household appliances, sports equipment, furniture, planters, etc.
- NOTE: Please confirm the size you need before ordering. The washer is cuttable according to your needs
- See more on Amazon...
Instruction: Simple To Use With No Need For Additional Tools, Suitable For Noise Reduction, Foot Pad, Stopper And More.
Note: Please Confirm The Size You Need Before Ordering. The Washer Is Cuttable According To Your Needs.
Application: The Vibration Isolation Washer Has Great Vibration Absorption And Noise Reduction. Can Be Used As Feet, Stops, And Protectors For Machinery Equipment, Household Appliances, Sports Equipment, Furniture, Planters, Etc..
Advantage: Made Of Rubber Features Waterproof And Moisture-Proof, Good Toughness, Anti-Collision, High And Low Temperature Resistance, Acid And Alkali Resistance, Not Easy To Deform And Age.
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #3
Lovejoy 68514425003 BR-27 Steel Clamp
Asin: B00ZKRIDBQ | Model: LOV BR-27 CLAMP | PartNumber: LOV BR-27 CLAMP | Ean: 0685144250032 | UPC: 685144250032
Features
- Supplied separately WITHOUT bolts
- Use friction force created by the bolted double clamp
- For longer units, two or more clamps are recommended
- All clamps are paint-finished
- See more on Amazon...
For Longer Units, Two Or More Clamps Are Recommended.
All Clamps Are Paint-Finished.
Use Friction Force Created By The Bolted Double Clamp.
First Available: 05/15/2017
Brand: Lovejoy | Manufacturer: Lovejoy
Weight: 0.33 pounds
Amazon Price: $21.66 | as of 05/26/2024
(3:15pm pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #4
NATGAI Ceiling Spring Vibration Isolator Hangers for A/C Air Handler Bedroom Theater Studio, Anti Vibration, 110 Lb Capacity, 1.20" Deflection(4 Pack)
Asin: B08RYKRLKJ | Model: NN148 | PartNumber: NN148 | Ean: 5438077645100
Features
- Premium Quality: Crafted with 3mm thick steel, high-grade springs, and silicone material, this vibration isolator excels in vibration absorption, ensuring optimal performance. It fully meets the stringent requirements of interior decoration, delivering long-lasting stability and reliability. The meticulous craftsmanship and choice of materials guarantee durability and robustness.
- Precise Specifications: Measuring 100mm*45mm*50mm/4''*1.8''*2'', the ceiling spring vibration isolator caters to various installation needs. The bolt size is 5/16'' (M8) with a weight of 0.4kg, making it lightweight for easy handling and installation. It boasts a maximum load capacity of 50kg (110lbs) The recommended spacing between each isolator is 24'', ensuring optimal vibration reduction. For instance, 63~99 isolators are required for a room area of 215~322 sq ft.
- Easy Installation: Featuring a bolt hole on the base, it offers rigid mounting, especially suitable for supporting machinery. Installation is straightforward, whether on ceilings, floors, walls, ducts, or other surfaces, requiring no complex tools or professional skills. Clear installation steps and instructions accompany the product, enabling anyone to install it quickly and easily.
- Versatile Applications: This shock absorber finds its use in a wide range of settings, including bedrooms, studios, home theaters, houses, hotels, bars, karaoke rooms, and more. It can be easily mounted on ceilings, walls, pumps, and other surfaces to effectively reduce noise and vibration. Whether for personal or commercial use, it offers the perfect solution for creating a peaceful and comfortable environment.
- Complete Package: Each set includes 4 spring vibration isolators with a capacity of 110 pounds, sufficient for most standard installation needs. The packaging is both attractive and sturdy, ensuring the product remains undamaged during transportation. Clear packaging labels and instructions make it easy for users to identify and use the product.
- See more on Amazon...
Easy Installation: Featuring A Bolt Hole On The Base, It Offers Rigid Mounting, Especially Suitable For Supporting Machinery. Installation Is Straightforward, Whether On Ceilings, Floors, Walls, Ducts, Or Other Surfaces, Requiring No Complex Tools Or Professional Skills. Clear Installation Steps And Instructions Accompany The Product, Enabling Anyone To Install It Quickly And Easily..
Complete Package: Each Set Includes 4 Spring Vibration Isolators With A Capacity Of 110 Pounds, Sufficient For Most Standard Installation Needs. The Packaging Is Both Attractive And Sturdy, Ensuring The Product Remains Undamaged During Transportation. Clear Packaging Labels And Instructions Make It Easy For Users To Identify And Use The Product..
Versatile Applications: This Shock Absorber Finds Its Use In A Wide Range Of Settings, Including Bedrooms, Studios, Home Theaters, Houses, Hotels, Bars, Karaoke Rooms, And More. It Can Be Easily Mounted On Ceilings, Walls, Pumps, And Other Surfaces To Effectively Reduce Noise And Vibration. Whether For Personal Or Commercial Use, It Offers The Perfect Solution For Creating A Peaceful And Comfortable Environment..
Precise Specifications: Measuring 100Mm*45Mm*50Mm/4''*1.8''*2'', The Ceiling Spring Vibration Isolator Caters To Various Installation Needs. The Bolt Size Is 5/16'' (M8) With A Weight Of 0.4Kg, Making It Lightweight For Easy Handling And Installation. It Boasts A Maximum Load Capacity Of 50Kg (110Lbs) The Recommended Spacing Between Each Isolator Is 24'', Ensuring Optimal Vibration Reduction. For Instance, 63~99 Isolators Are Required For A Room Area Of 215~322 Sq Ft..
Brand: NATGAI | Manufacturer: NATGAI
See On Amazon #5
12 Pack Rubber Feet,High Damping Vibration Damping Rubber Ring for Electric Motor,Refrigeration Compressor,Quiet Vibration Reduction Place (Chlorobutyl)
Asin: B0B62WCZ2X
Features
- Rubber gasket, using Chlorobutyl, has high damping vibration reduction characteristics, widely used in refrigeration compressors, motors and other machines that require vibration reduction
- Rubber feet is easy to install, and its neck clamping installation and middle bolt perforation installation can meet various vibration reduction needs
- Rubber damping washers have a hole diameter of 0.394 inches for bolts, a neck diameter of 0.622 inches, and a neck height of 0.138 inches. The upper diameter of the washer is 0.78 inches and the lower diameter is 1.13 inches
- Chlorobutyl rubber feet have heat resistance, flex resistance, weather resistance, oil resistance, good aging resistance and long service life
- Rubber ring has been tested by ROHS and REACH and meets environmental protection requirements
- See more on Amazon...
Rubber Damping Washers Have A Hole Diameter Of 0.394 Inches For Bolts, A Neck Diameter Of 0.622 Inches, And A Neck Height Of 0.138 Inches. The Upper Diameter Of The Washer Is 0.78 Inches And The Lower Diameter Is 1.13 Inches.
Rubber Ring Has Been Tested By Rohs And Reach And Meets Environmental Protection Requirements.
Chlorobutyl Rubber Feet Have Heat Resistance, Flex Resistance, Weather Resistance, Oil Resistance, Good Aging Resistance And Long Service Life.
Rubber Feet Is Easy To Install, And Its Neck Clamping Installation And Middle Bolt Perforation Installation Can Meet Various Vibration Reduction Needs.
Brand: Byrub
See On Amazon #6
M8x23mm Rubber Studs Shock Absorber Anti-Vibration Isolator Mounts, 30x20mm Rubber Cylindrical Vibration Isolation Mount for Air Compressors Garage Motor Diesel Engines 4 PCS, with 8PCS M8 Locknuts
Asin: B089GX4788 | Model: M8*8,VV30*20+2G8*23 | PartNumber: M8*8,VV30*20+2G8*23 | Ean: 0190344599329 | UPC: 190344599329
Features
- More Convenient and Cost-effective with Lock nuts 4 Pack M8 Rubber motor mounts with 8pcs M8 Hex Lock-nuts ; Thread Size: 0.31"(Dia) x 0.91"(H) /M8 x23mm; Rubber Size 1.18''(Dia) x 0.79''(H)/(30mm x20mm); Overall Height: 2.6''/66mm; VV type Compatible with most devices.
- STRONG QUALITY Material: Metal+Rubber; Made of Soft and Durable Rubber and high Rigidity steel zinc coating, Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces
- REDUCING NOICE The M8 rubber isolator mounts with studs and lock-nuts is widely used for vibration, impact and noise control of welders and other equipment as a damping element; Protect the body s normal work and get good surroundings, damping noise reduction effect is obvious; In radio equipment and instruments, it protects machine vibration interference and has a good buffering effect. Supports up to 582lbs for all 4 pcs
- WIDELY APPLICATION Design to shock absorption of Heavy duty Mini Split Heat Pumps Air Compressor, Garage Door Lift Motor, Harvester, Generator, Water Pumps, diesel engines, Gasoline Engines, water pumps, Electron components, medical equipment, home appliance, mechanical equipment, office facilities, aviation, construction, automobile etc.
- EASY INSTALLATION All you have to do is to place the devices holes in the screws and fasten the nuts of the Mounts, Set includes all anchoring accessories.
- See more on Amazon...
Reducing Noice→The M8 Rubber Isolator Mounts With Studs And Lock-Nuts Is Widely Used For Vibration, Impact And Noise Control Of Welders And Other Equipment As A Damping Element; Protect The Body’S Normal Work And Get Good Surroundings, Damping Noise Reduction Effect Is Obvious; In Radio Equipment And Instruments, It Protects Machine Vibration Interference And Has A Good Buffering Effect. Supports Up To 582Lbs For All 4 Pcs.
Easy Installation→All You Have To Do Is To Place The Devices Holes In The Screws And Fasten The Nuts Of The Mounts, Set Includes All Anchoring Accessories..
Widely Application→Design To Shock Absorption Of Heavy Duty Mini Split Heat Pumps，Air Compressor, Garage Door Lift Motor, Harvester, Generator, Water Pumps, Diesel Engines, Gasoline Engines, Water Pumps, Electron Components, Medical Equipment, Home Appliance, Mechanical Equipment, Office Facilities, Aviation, Construction, Automobile Etc..
Strong Quality →Material: Metal+Rubber; Made Of Soft And Durable Rubber And High Rigidity Steel Zinc Coating, Simple Geometrical Design Supports Dynamic Performance And Stability Under Lateral (Sideways) Forces.
Brand: EASYEAH | Manufacturer: ZH
Warranty: WARNING:NOT SUITABLE FOR KIDS UNDER 12 YEARS DUE TO SMALL PARTS
See On Amazon #7
AMGSH Ceiling Vibration Damping Mounts, 4 Pack Spring Vibration Isolator Hangers, 110Lb Capacity, 1.2 Deflection Ceiling Spring Vibration Isolator for A/C Air Handler Home Theaters, Studios, Hotels
Asin: B0CRBKRDWK | Model: MGS0102-1 | PartNumber: MGS0102-1
Features
- Precision Vibration Control Solution: Elevate your space with our vibration isolator, boasting dimensions of 4'' x 1.8'' x 2'' (100mm x 45mm x 50mm). With a sturdy 5/16'' (M8) bolt size, each isolator weighs a mere 0.4kg while supporting a maximum load of 50kg (110lbs).
- Advanced Vibration Control & Sturdy Support: AMGSH's ceiling isolation hangers feature a silicon-infused red component, surpassing traditional rubber in vibration absorption capabilities. Crafted from high-quality 3mm thick steel, the removable mounting frames ensure stable support.
- Easy Installation: Designed for hassle-free installation, these vibration hangers feature a 5/16 inch (M8) pre-drilled bolt hole on a sturdy metal frame base. Equipped with a matched coupling nut and washer, you can effortlessly mount these shockproof elastomeric hangers on ceilings, floors, walls, ducts, HAVC systems, and more.
- Versatile Usage: Perfect for diverse spaces like home theaters, bedrooms, studios, hotels, bars, and gyms, these spring isolators offer effective noise control. Utilizing resilient hanger-suspended ceilings in conjunction with floor isolation systems ensures the most effective control of noise, effectively reducing sound transfer between louder spaces and the areas below.
- NOTE: For optimal performance, maintain a recommended distance of 24 inches between each pair of isolators. e.g. 63~99 isolators are needed for a room aera of 215~322 sq ft.
- See more on Amazon...
Easy Installation: Designed For Hassle-Free Installation, These Vibration Hangers Feature A 5/16 Inch (M8) Pre-Drilled Bolt Hole On A Sturdy Metal Frame Base. Equipped With A Matched Coupling Nut And Washer, You Can Effortlessly Mount These Shockproof Elastomeric Hangers On Ceilings, Floors, Walls, Ducts, Havc Systems, And More..
Note: For Optimal Performance, Maintain A Recommended Distance Of 24 Inches Between Each Pair Of Isolators. E.G. 63~99 Isolators Are Needed For A Room Aera Of 215~322 Sq Ft..
Versatile Usage: Perfect For Diverse Spaces Like Home Theaters, Bedrooms, Studios, Hotels, Bars, And Gyms, These Spring Isolators Offer Effective Noise Control. Utilizing Resilient Hanger-Suspended Ceilings In Conjunction With Floor Isolation Systems Ensures The Most Effective Control Of Noise, Effectively Reducing Sound Transfer Between Louder Spaces And The Areas Below..
Advanced Vibration Control & Sturdy Support: Amgsh's Ceiling Isolation Hangers Feature A Silicon-Infused Red Component, Surpassing Traditional Rubber In Vibration Absorption Capabilities. Crafted From High-Quality 3Mm Thick Steel, The Removable Mounting Frames Ensure Stable Support..
Brand: AMGSH | Manufacturer: AMGSH
See On Amazon #8
2 Sheet Anti Vibration Pads Shock Absorbing Mat 70 Durometer 12 x 6 x 0.125 Inch Isolation Damping Mat Acoustic Damping Film Sound
Asin: B0B9BR9WXT
Features
- Sufficient to Meet Your Needs: you will get 2 pieces anti vibration pads, enough to meet your daily use and replacement needs, also can be shared with others
- Reliable Quality: made of quality foam rubber, this acoustic and vibration damping film 70 duro is anti wear, strong and not easy to break or tear, can serve you for a long time
- Proper Size: each sheet of anti vibration mat measures about 0.125 x 6 x 12 inch, can be cut to the length and shape according to actual needs
- Functions: these vibration and isolation pads have good sound insulation and shock absorption, can absorb impact and noise, and they are anti aging, will not harden or break over time
- Wide Applications: these mechanical vibration damping pads can be applied for various machinery, equipment, audio, etc., indoor and outdoor scenes, great for the vibration damping of motorcycle mirrors and cameras
- See more on Amazon...
Proper Size: Each Sheet Of Anti Vibration Mat Measures About 0.125 X 6 X 12 Inch, Can Be Cut To The Length And Shape According To Actual Needs.
Wide Applications: These Mechanical Vibration Damping Pads Can Be Applied For Various Machinery, Equipment, Audio, Etc., Indoor And Outdoor Scenes, Great For The Vibration Damping Of Motorcycle Mirrors And Cameras.
Functions: These Vibration And Isolation Pads Have Good Sound Insulation And Shock Absorption, Can Absorb Impact And Noise, And They Are Anti Aging, Will Not Harden Or Break Over Time.
Reliable Quality: Made Of Quality Foam Rubber, This Acoustic And Vibration Damping Film 70 Duro Is Anti Wear, Strong And Not Easy To Break Or Tear, Can Serve You For A Long Time.
Brand: Suclain | Manufacturer: Suclain
See On Amazon #9
uxcell M6 Male Female Rubber Mounts,Vibration Isolators,Shock Absorber 20mm x 10mm 8pcs
Asin: B07NK9FVT1
Features
- UNIVERSAL DESIGN - Rubber Mounts Male Thread Size : M6 x 16mm / M6 x 0.63" (D x L); Rubber Size : 20 x 10mm / 0.79" x 0.39"(D*H) ; set of 8 pieces Rubber Vibration Mount
- EXCELLENT DESIGN - rubber mounts shock Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces
- ADVANTAGE - rubber Vibration mounts' rubber has large elasticity and is light and high, which plays a good buffering role and can protect the machine well.
- MATERIAL - The rubber shock absorber's metal and rubber are bonded together using a special process
- APPLICATION - Rubber mounts mainly used for Fitness equipment, air conditioning, bicycle, air compressors, gasoline engines, water pumps, Welding machine, and other equipment as a damping element
- See more on Amazon...
Advantage - Rubber Vibration Mounts' Rubber Has Large Elasticity And Is Light And High, Which Plays A Good Buffering Role And Can Protect The Machine Well..
Application - Rubber Mounts Mainly Used For Fitness Equipment, Air Conditioning, Bicycle, Air Compressors, Gasoline Engines, Water Pumps, Welding Machine, And Other Equipment As A Damping Element.
Material - The Rubber Shock Absorber's Metal And Rubber Are Bonded Together Using A Special Process.
Excellent Design - Rubber Mounts Shock Simple Geometrical Design Supports Dynamic Performance And Stability Under Lateral (Sideways) Forces.
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 1.97 x 1.97 inches
See On Amazon #10
Cherbo Rubber Studs Shock Absorber M8 30x20mm 4 Pack Anti Vibration Rubber Isolator Mounts Cylindrical Vibration Isolation Mount for Air Compressors, Garage Motor, Diesel Engines
Asin: B0BX64193S | Model: CL30(3020) | PartNumber: CL30(3020)
Features
- Universal Rubber Mounts: 30x20 mm/ 1.18" x 0.79" (D x H) Mechanical vibration damping mounts with M8 threaded studs. Including: 4-Pack Rubber Vibration Isolator Mount.
- Anti-Vibration & Reducing Noice: M8 Rubber isolator mounts with studs and nuts is widely used for vibration, impact and noise control of welders and other equipment as a damping element. It have a good buffer in the radio equipment, instruments, protect machine vibration interference.
- High Quality: The rubber shock absorber are made of durable rubber and steel zinc coating, resilient and anti-aging. The metal stud is two pieces terminated and bonded within the rubber that perform better isolation than go all the way through the rubber. High durometer, loadbearing is 176 lbs for all 4 pcs, torsion up to 8 N m.
- Wide Application: Anti vibration pads widely used for Mini Split Heat Pumps, Air Compressor, Mini Split Wall Mounting Bracket, Garage Door Lift Motor, Harvester, Generator, Water Pumps, Gasoline Engines etc .
- Easy Installation: Set includes all anchoring accessories, you only have to place the devices holes in the screws and fasten the nuts of the anti vibration mounts.
- See more on Amazon...
High Quality: The Rubber Shock Absorber Are Made Of Durable Rubber And Steel Zinc Coating, Resilient And Anti-Aging. The Metal Stud Is Two Pieces Terminated And Bonded Within The Rubber That Perform Better Isolation Than Go All The Way Through The Rubber. High Durometer, Loadbearing Is 176 Lbs For All 4 Pcs, Torsion Up To 8 N·M..
Easy Installation: Set Includes All Anchoring Accessories, You Only Have To Place The Devices Holes In The Screws And Fasten The Nuts Of The Anti Vibration Mounts..
Wide Application: Anti Vibration Pads Widely Used For Mini Split Heat Pumps, Air Compressor, Mini Split Wall Mounting Bracket, Garage Door Lift Motor, Harvester, Generator, Water Pumps, Gasoline Engines Etc ..
Anti-Vibration & Reducing Noice: M8 Rubber Isolator Mounts With Studs And Nuts Is Widely Used For Vibration, Impact And Noise Control Of Welders And Other Equipment As A Damping Element. It Have A Good Buffer In The Radio Equipment, Instruments, Protect Machine Vibration Interference..
Brand: Cherbo | Manufacturer: Argni
See On Amazon #11
HOIGON 10 Pack 110 Lbs Ceiling Vibration Damping Mounts,Spring Vibration Isolator with Removable Frame Design,Soundproof Ceiling Suspended Mounted Damping Hanger for Home Theater, Studio, Office
Asin: B095M2VRDM | Model: Ceiling Vibration Damping Mounts | PartNumber: Ceiling Vibration Damping Mounts | Ean: 0744358430521 | UPC: 744358430521
Features
- RELIABLE MATERIAL - The mechanical vibration damping mounts are made of high-quality 3mm thick steel and silicon material, reliable, no odor, not easy to break. It features better performance in absorbing vibration to meet the requirements of interior decoration.
- GREAT VALUED PACK - You will get a value package including 10 packs of ceiling vibration damping mounts, measuring 100 x 50 x 50mm / 4 x 2 x 2 inches, in black plus red color. Each isolator has a light weight of 0.4kg, easy to carry and use.
- EASY TO INSTALL - Designed with a 5/16 inch (M8) pre-drilled bolt hole( equipped with matched coupling nut and washer) on metal frame base, you can easily mount shockproof elastomeric hanger on ceilings, floors, ducts, walls, HAVC and more.
- FITS FOR ANYWHERE - This spring isolator vibration is widely used in home theaters, bedroom, studios, hall, hotels, bars, TV stations, concert halls, gymnasiums, recording studios, auditoriums, karaoke rooms, rehearsal rooms or other places.
- ABOUT AFTER SALES - Please check the package after you receive the product. If you are not satisfied or have any problems with our shock absorber, please contact us in feel free. You can get a 30-day worry-free refund and 7-day 24-hour service.
- See more on Amazon...
Easy To Install - Designed With A 5/16 Inch (M8) Pre-Drilled Bolt Hole( Equipped With Matched Coupling Nut And Washer) On Metal Frame Base, You Can Easily Mount Shockproof Elastomeric Hanger On Ceilings, Floors, Ducts, Walls, Havc And More..
About After Sales - Please Check The Package After You Receive The Product. If You Are Not Satisfied Or Have Any Problems With Our Shock Absorber, Please Contact Us In Feel Free. You Can Get A 30-Day Worry-Free Refund And 7-Day 24-Hour Service..
Fits For Anywhere - This Spring Isolator Vibration Is Widely Used In Home Theaters, Bedroom, Studios, Hall, Hotels, Bars, Tv Stations, Concert Halls, Gymnasiums, Recording Studios, Auditoriums, Karaoke Rooms, Rehearsal Rooms Or Other Places..
Great Valued Pack - You Will Get A Value Package Including 10 Packs Of Ceiling Vibration Damping Mounts, Measuring 100 X 50 X 50Mm / 4 X 2 X 2 Inches, In Black Plus Red Color. Each Isolator Has A Light Weight Of 0.4Kg, Easy To Carry And Use..
Brand: HOIGON | Manufacturer: HOIGON
See On Amazon #12
4pcs M6 Anti-Vibration Rubber Isolator Mounts with 2 Threaded Studs Shock Double Ends Screw Vibration Damping Mounts Silent Block Damper Car Boat Bobbins(VV20*10 M6*18)
Asin: B07XZ8D4BF | Ean: 0719855265556 | UPC: 719855265556
Features
- Mainly Used: This anti-vibration rubber isolator mount is mainly used for air compressors, engines, gasoline engines, water pumps.
- Damping Elements: This anti-vibration rubber isolator mount always used as damping elements for vibration and noise control.
- Main Function: This anti-vibration rubber isolator mount can protect the machine's normal work and get good surroundings, reducing noise and shock obviously.
- Simple Geometrical Design: This anti-vibration rubber isolator mount adopts simple geometrical design that supports dynamic performance and stability under lateral/sideways forces.
- Anti-Vibration Silent Block: In audio equipment and instruments, This anti-vibration rubber isolator mount avoids machine vibration interference, having a good buffer.
- See more on Amazon...
Main Function: This Anti-Vibration Rubber Isolator Mount Can Protect The Machine's Normal Work And Get Good Surroundings, Reducing Noise And Shock Obviously..
Anti-Vibration Silent Block: In Audio Equipment And Instruments, This Anti-Vibration Rubber Isolator Mount Avoids Machine Vibration Interference, Having A Good Buffer..
Simple Geometrical Design: This Anti-Vibration Rubber Isolator Mount Adopts Simple Geometrical Design That Supports Dynamic Performance And Stability Under Lateral/Sideways Forces..
Damping Elements: This Anti-Vibration Rubber Isolator Mount Always Used As Damping Elements For Vibration And Noise Control..
Brand: Garosa | Manufacturer: Garosa
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.04 Pounds
See On Amazon #13
M10 Rubber Studs Shock Absorber Anti-Vibration Isolator Mounts 4 Packs, Rubber Cylindrical Vibration Isolation Mount for Air Compressors Garage Motor Diesel Engines(with 8PCS Non-Slip Nuts)
Asin: B0B7BPYJBR | Model: M10,VV40*30+2G10*28 | PartNumber: M10,VV40*30+2G10*28
Features
- STRONG QUALITY Material: Metal+Rubber;Made of Durable Rubber (high durometer) and steel zinc coating,Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces.
- SIZE Please refer to the details page for specific sizes; The nuts is M10 and universal in size and compatible with most device.
- REDUCING NOICE The Rubber Mounts with Studs and Lock Nuts M10, which used to reduce noise and shock absorption - Supports up to 860lbs for all 4 pcs.
- EASY INSTALLATION All you have to do is to place the devices holes in the screws and fasten the nuts of the Mounts, Set includes all anchoring accessories.
- WIDELY APPLICATION Design to shock absorption of Heavy duty Mini Split Heat Pumps, Air Compressor, Garage Door Lift Motor, Harvester, Generator, Water Pumps, Gasoline Engines etc.
- See more on Amazon...
Reducing Noice→The Rubber Mounts With Studs And Lock Nuts M10, Which Used To Reduce Noise And Shock Absorption - Supports Up To 860Lbs For All 4 Pcs..
Widely Application→ Design To Shock Absorption Of Heavy Duty Mini Split Heat Pumps, Air Compressor, Garage Door Lift Motor, Harvester, Generator, Water Pumps, Gasoline Engines Etc..
Easy Installation→All You Have To Do Is To Place The Devices Holes In The Screws And Fasten The Nuts Of The Mounts, Set Includes All Anchoring Accessories..
Size → Please Refer To The Details Page For Specific Sizes; The Nuts Is M10 And Universal In Size And Compatible With Most Device..
Brand: BOPOREAE | Manufacturer: ZH
Warranty: WARNING: NOT SUITABLE FOR KIDS UNDER 12 YEARS DUE TO SMALL PARTS BUILT-IN BLADE WITH FUNCTIONAL SHARP EDGES AND SHARP TIPS
See On Amazon #14
FVIEXE 8PCS M10 Rubber Isolator Mounts, Anti Vibration Generator Isolation Mounts with Double Studs, Rubber Shock Absorber Mounts Isolation Mounts for Air Compressors, Garage Motor, Diesel Engines
Asin: B0B31J9C1D | Model: 1 | PartNumber: 1
Features
- Product Details: 40 x 30mm (Dx H) rubber mount with M10 x 25mm Studs; Package Included: 8PCS Rubber Vibration Mounts. Easy to install and remove, maximize work efficiency
- Anti-Vibration Silent Block: Rubber isolator mount feature a good buffer, can protect machine vibration interference and reduce damping noise, protect the machine well
- Rubber Vibration Isolation Cushion to Reduce Noise and Shock Absorption: Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces; Protect the body s normal work and get good surroundings, damping noise reduction and the effect is obvious
- Premium Material: Rubber shock absorber mounts is made from high-quality rubber and steel zinc coating, high durometer, resilient; Metal stud is terminated and bonded firmly within the rubber, perform better isolation than go all the way through the rubber
- Wide Range of Uses: Mechanical viberation rubber mounts ( damping elements for welding machine and other equipment for vibration, shock and noise control ) are widely used to shock absorption of air compressors, diesel engines, gasoline engines, water pumps, heavy duty mini split heat pumps, garage door Lift motor, harvester, generator, air conditioning, fitness equipment, welding machine, etc
- See more on Amazon...
Rubber Vibration Isolation Cushion To Reduce Noise And Shock Absorption: Simple Geometrical Design Supports Dynamic Performance And Stability Under Lateral (Sideways) Forces; Protect The Body’S Normal Work And Get Good Surroundings, Damping Noise Reduction And The Effect Is Obvious.
Wide Range Of Uses: Mechanical Viberation Rubber Mounts ( Damping Elements For Welding Machine And Other Equipment For Vibration, Shock And Noise Control ) Are Widely Used To Shock Absorption Of Air Compressors, Diesel Engines, Gasoline Engines, Water Pumps, Heavy Duty Mini Split Heat Pumps, Garage Door Lift Motor, Harvester, Generator, Air Conditioning, Fitness Equipment, Welding Machine, Etc.
Premium Material: Rubber Shock Absorber Mounts Is Made From High-Quality Rubber And Steel Zinc Coating, High Durometer, Resilient; Metal Stud Is Terminated And Bonded Firmly Within The Rubber, Perform Better Isolation Than Go All The Way Through The Rubber.
Anti-Vibration Silent Block: Rubber Isolator Mount Feature A Good Buffer, Can Protect Machine Vibration Interference And Reduce Damping Noise, Protect The Machine Well.
Brand: FVIEXE | Manufacturer: FVIEXE
See On Amazon #15
Air Conditioning Bracket Floor Mount Vibration Isolator, Compressor Floor Silencing Mount Vibration Isolator, Black Rubber Mount Vibration Isolator Shock Anti-Vibration Damping Mounts Pads (4 Pack)
Asin: B0CM23BDBN | Model: RP6365 | PartNumber: RP6365 | Ean: 0737096493064 | UPC: 737096493064
Features
- Air conditioner anti-vibration base-This product design is simple, practical, trapezoidal, low center of gravity, and stable structure
- Air Conditioner Silencing Pad - Easy to install and operate, good anti-vibration function
- Air conditioner anti-vibration stand - made of rubber material, with shock absorption and sound damping effect, durable
- Air-conditioner base - suitable for small air-conditioner outdoor unit
- To install, just put the holes of anti-vibration rubber seat on the screws and tighten the nuts of anti-vibration bracket
- See more on Amazon...
💯Air Conditioner Anti-Vibration Stand - Made Of Rubber Material, With Shock Absorption And Sound Damping Effect, Durable.
💯To Install, Just Put The Holes Of Anti-Vibration Rubber Seat On The Screws And Tighten The Nuts Of Anti-Vibration Bracket.
💯Air-Conditioner Base - Suitable For Small Air-Conditioner Outdoor Unit.
💯Air Conditioner Silencing Pad - Easy To Install And Operate, Good Anti-Vibration Function.
Manufacturer: JioYee
See On Amazon #16
4pcs 20 x 15mm Rubber Mounts Rubber Vibration Isolator Mounts Shock Absorber with M6 x 19mm Studs Vibration Isolators
Asin: B0BCPFSKL7 | Model: apx8786651A | PartNumber: apx8786651A
Features
- Package: 4pcs Black Rubber Vibration Isolator Mounts Shock Absorber and 8pcs M6 nuts.
- Size: Total length is 2(51mm),20 x 15mm (Dx H) rubber mount with M6 x 19mm Studs.
- Material: The rubber shock absorber's metal and rubber are bonded together using a special process.
- Function: protect the normal state of the equipment and obtain a good working environment. The effect of damping and noise reduction is very obvious.
- Application: mainly used for Fitness equipment, air conditioning, bicycle,air compressors, enginers, gasoline engines, water pumps ,Welding machine and other equipments as a damping element.
- See more on Amazon...
Material: The Rubber Shock Absorber's Metal And Rubber Are Bonded Together Using A Special Process..
Application: Mainly Used For Fitness Equipment, Air Conditioning, Bicycle,Air Compressors, Enginers, Gasoline Engines, Water Pumps ,Welding Machine And Other Equipments As A Damping Element..
Function: Protect The Normal State Of The Equipment And Obtain A Good Working Environment. The Effect Of Damping And Noise Reduction Is Very Obvious..
Size: Total Length Is 2"(51Mm),20 X 15Mm (Dx H) Rubber Mount With M6 X 19Mm Studs..
Brand: APUXON | Manufacturer: APUXON
Warranty: 1Year
See On Amazon #17
M8 Rubber Mounts Shock Absorber Anti Vibration Silentblock Car Boat Bobbins, Pack of 4
Asin: B01N0X2UCF | Model: TRTV2037 | PartNumber: TRTV2037 | Ean: 0712190291105 | UPC: 712190291105
Features
- WIDELY USAGE AND GOOD QUALITY : Mainly used for air compressors, engines, gasoline engines, water pumps; Material: Metal+Rubber
- DAMPING ELEMENT : As a damping element for welding machine and other equipment for vibration, shock and noise control
- COMPACT AND STABLE : Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces
- REDUCING NOICE : Protect the body's normal work and get good surroundings, damping noise reduction and the effect is obvious
- MORE PRACTICAL : In the radio equipment, instruments, protect machine vibration interference, having a good buffer
- See more on Amazon...
【Compact And Stable】: Simple Geometrical Design Supports Dynamic Performance And Stability Under Lateral (Sideways) Forces.
【More Practical】: In The Radio Equipment, Instruments, Protect Machine Vibration Interference, Having A Good Buffer.
【Reducing Noice】: Protect The Body's Normal Work And Get Good Surroundings, Damping Noise Reduction And The Effect Is Obvious.
【Damping Element】: As A Damping Element For Welding Machine And Other Equipment For Vibration, Shock And Noise Control.
Brand: Yosoo | Manufacturer: Yosoo
Dimensions: 5.51 x 3.94 x 1.18 inches | Weight: 0.35 pounds
See On Amazon #18
Cherbo Rubber Studs Shock Absorber M8 45x32mm 4 Pack Anti Vibration Rubber Isolator Mounts Vibration Isolation Mount for Mini Split Heat Pumps, Air Compressors, Garage Motor, Diesel Engines
Asin: B0BX65H8Q1 | Model: AG45 | PartNumber: AG45
Features
- Universal Rubber Mounts: 40x26 mm/ 1.57" x 1.02" (D x H) Mechanical vibration damping mounts with M8 threaded studs. Including: 4-Pack Rubber Vibration Isolator Mount.
- Anti-Vibration & Reducing Noice: M8 Rubber isolator mounts with studs and nuts is widely used for vibration, impact and noise control of welders and other equipment as a damping element. It have a good buffer in the radio equipment, instruments, protect machine vibration interference.
- High Quality: The rubber shock absorber are made of durable rubber and steel zinc coating, resilient and anti-aging. The conical structure allows higher dynamics and stability than cylindrical shapes. High durometer, loadbearing is 176 lbs for all 4 pcs, torsion up to 8 N m.
- Wide Application: Anti vibration pads widely used for Mini Split Heat Pumps, Air Compressor, Mini Split Wall Mounting Bracket, Garage Door Lift Motor, Harvester, Generator, Water Pumps, Gasoline Engines etc .
- Easy Installation: Set includes all anchoring accessories, you only have to place the devices holes in the screws and fasten the nuts of the anti vibration mounts.
- See more on Amazon...
High Quality: The Rubber Shock Absorber Are Made Of Durable Rubber And Steel Zinc Coating, Resilient And Anti-Aging. The Conical Structure Allows Higher Dynamics And Stability Than Cylindrical Shapes. High Durometer, Loadbearing Is 176 Lbs For All 4 Pcs, Torsion Up To 8 N·M..
Easy Installation: Set Includes All Anchoring Accessories, You Only Have To Place The Devices Holes In The Screws And Fasten The Nuts Of The Anti Vibration Mounts..
Wide Application: Anti Vibration Pads Widely Used For Mini Split Heat Pumps, Air Compressor, Mini Split Wall Mounting Bracket, Garage Door Lift Motor, Harvester, Generator, Water Pumps, Gasoline Engines Etc ..
Anti-Vibration & Reducing Noice: M8 Rubber Isolator Mounts With Studs And Nuts Is Widely Used For Vibration, Impact And Noise Control Of Welders And Other Equipment As A Damping Element. It Have A Good Buffer In The Radio Equipment, Instruments, Protect Machine Vibration Interference..
Brand: Cherbo | Manufacturer: Argni
See On Amazon #19
4pcs 25 x 25mm Rubber Mounts Rubber Vibration Isolator Mounts Shock Absorber with M6 x 19mm Studs Vibration Isolators
Asin: B0B51CTGQZ | Model: APX55894Q | PartNumber: APX55894Q
Features
- Package: 4pcs Black Rubber Vibration Isolator Mounts Shock Absorber and 8pcs M6 nuts.
- Size: Total length is 2-1/2(63mm),25 x 25mm (Dx H) rubber mount with M6 x 19mm Studs.
- Material: The rubber shock absorber's metal and rubber are bonded together using a special process.
- Function: protect the normal state of the equipment and obtain a good working environment. The effect of damping and noise reduction is very obvious.
- Application: mainly used for Fitness equipment, air conditioning, bicycle,air compressors, enginers, gasoline engines, water pumps ,Welding machine and other equipments as a damping element.
- See more on Amazon...
Material: The Rubber Shock Absorber's Metal And Rubber Are Bonded Together Using A Special Process..
Application: Mainly Used For Fitness Equipment, Air Conditioning, Bicycle,Air Compressors, Enginers, Gasoline Engines, Water Pumps ,Welding Machine And Other Equipments As A Damping Element..
Function: Protect The Normal State Of The Equipment And Obtain A Good Working Environment. The Effect Of Damping And Noise Reduction Is Very Obvious..
Size: Total Length Is 2-1/2"(63Mm),25 X 25Mm (Dx H) Rubber Mount With M6 X 19Mm Studs..
Brand: APUXON | Manufacturer: APUXON
See On Amazon #20
uxcell D15 x H10 Rubber Vibration Isolator Mounts Shock Absorber with M4 x 10mm Studs 8pcs
Asin: B07PDYV48Q
Features
- UNIVERSAL DESIGN - 0.59" x 0.39" rubber mount with M4 x 10mm Studs , set of 8 pieces rubber Vibration Mounts
- EXCELLENT DESIGN - Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces
- ADVANTAGE - The rubber has large elasticity and is light and high, which plays a good buffering role and can protect the machine well.
- MATERIAL - Metal and rubber materials are treated with special processes for strong adhesion and long service life.
- APPLICATION - Rubber mounts mainly used for Fitness equipment, air conditioning, bicycle,air compressors, enginers, gasoline engines, water pumps ,Welding machine and other equipments as a damping element
- See more on Amazon...
Advantage - The Rubber Has Large Elasticity And Is Light And High, Which Plays A Good Buffering Role And Can Protect The Machine Well..
Application - Rubber Mounts Mainly Used For Fitness Equipment, Air Conditioning, Bicycle,Air Compressors, Enginers, Gasoline Engines, Water Pumps ,Welding Machine And Other Equipments As A Damping Element.
Material - Metal And Rubber Materials Are Treated With Special Processes For Strong Adhesion And Long Service Life..
Excellent Design - Simple Geometrical Design Supports Dynamic Performance And Stability Under Lateral (Sideways) Forces.
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 1.97 x 1.97 inches
See On Amazon
Looking For Something Else?
Search